CONTENTS
1. HOW TO CONNECT YOUR VIDEO RECORDER . . . . . . . . . 4 6. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 17
How to connect your video recorder to the TV set . . . . . 4
Connecting with a scart cable . . . . . . . . . . . . . . . . . . . . . . 4
Connecting without a scart cable . . . . . . . . . . . . . . . . . . . 5
Connecting a decoder or other equipment . . . . . . . . . . . . 5
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 17
Programming a recording (with ’SHOWVIEW’) . . . . . . . 17
Programming a recording (without ’SHOWVIEW’) . . . . 18
How to check or change a programmed recording
(TIMER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to clear a programmed recording (TIMER) . . . . . . 19
2. INSTALLING YOUR VIDEO RECORDER . . . . . . . . . . . . . . . 6
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 7 7. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 20
Channel number or frequency display . . . . . . . . . . . . . . . 7
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 8
Automatic TV channel allocation (Follow TV) . . . . . . . . . 8
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 8
Monitor function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sorting and clearing TV channels manually . . . . . . . . . . . 9
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the on-screen display (OSD) . . . . . . . . . . . . . . . . 20
Automatic switch-off (tuner mode) . . . . . . . . . . . . . . . . . 20
Reducing picture disturbance (’optimizing the
modulator’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switching off the modulator . . . . . . . . . . . . . . . . . . . . . . . 21
8. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22
9. GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 10
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Emergency interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The symbols on your video recorder display . . . . . . . . . 10
Summary of user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic search for a tape position (index search) . . 13
Automatic search for a blank space on the tape . . . . . 13
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tracking during playback . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tracking during still picture . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Recording without automatic switch-off . . . . . . . . . . . . 15
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Automatic recording from a satellite receiver (SAT
RECORDING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching on ’Direct Record’ . . . . . . . . . . . . . . . . . . . . . . 16
3
Download from Www.Somanuals.com. All Manuals Search And Download.
&
OPERATING INSTRUCTIONS IN BRIEF
The remote control
CLEAR (CL), y Delete : To delete last entry/Clear programmed recording (TIMER)
PLAY G Playback : To play a recorded cassette
TV To call up additional TV functions : Additional TV
functions for TV sets with the same remote control
code (RC5)
[
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
TV/STANDBY m Switch off : To switch off set, interrupt menu
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
function, interrupt a programmed recording (TIMER)
scanning
CHILD LOCK u No function
INDEX E Index search: In combination with
[
/
I
: to search for previous/next
EJECT J Eject: To eject a cassette
recording on the cassette.
MONITOR TV monitor : To switch between TV reception and
RECORD/OTR n Record: To record the programme selected
VCR playback
STILL R Still picture: To stop the tape and show a still picture
SYSTEM Switching the TV system: To select the TV system
while you record or play a cassette
Additional TV functions
Press the TV button and the correct button on the remote control at the same time
0-9 Number buttons: 0 - 9
D/Sr TV volume: TV volume down
SELECT Select: To select a function
C/Sq TV volume: TV volume up
TIMER TIMER: To make a manual TIMER programming with
SHOWVIEW or to alter or clear a programmed
TIMER
SP/LP, AV To switch the TV to Audio-/Video input socket
CLEAR (CL), y TV volume off: To switch off the TV volume
TV/STANDBY m Switch off : To switch off set
MENU Menu : To call up the main menu
OK Store/Confirm: To store or confirm entry
D/Sr Select: Cursor left
P q TV programme number : TV programme number up
P r TV programme number : TV programme number down
C/Sq Select: Cursor right
P q Select: One line or programme number up
P r Select: One line or programme number down
SP/LP, AV No function :
Download from Www.Somanuals.com. All Manuals Search And Download.
&
Front of the set
Back of the set
4
Mains socket: To connect the mains cable
STANDBY m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
EXT.2 AV 2 Scart socket 2: To connect a satellite receiver, decoder, video recorder, etc. (programme
RECORD n Record: To record the programme selected
PROGRAMME r Select: One line or programme number down.
PROGRAMME q Select: One line or programme number up.
number ’E2’)
EXT.1 AV 1 Scart socket 1: To connect the TV set (programme number ’E1’)
2
3
Aerial input socket: To connect the aerial cable
STOP/EJECT ? Pause/Stop, eject cassette: To stop the tape and eject the cassette
Aerial output socket: To connect the TV set
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
PLAY G Playback : To play a cassette
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
I
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote codes
Acura
Adyson
Akai
Akura
Alba
Allorgan
Amplivision
Amstrad
Anitech
Arcam
Asuka
Audiosonic
BPL
BSR
02
20
18, 33
21, 25
02, 07, 21
28
GoldStar
Goodmans
Gorenje
Graetz
Granada
Grandin
Grundig
HCM
15, 20, 27
07, 10, 20, 29, 36
Proline
Protech
Quelle
31
02, 12, 20, 23, 25, 38
35
33
10, 18, 20
03, 04, 33
Questa
07
07
33
25
Rank Arena
Rediffusion
Rex
Roadstar
SEG
SEI
Saba
Saisho
Salora
26
17
02, 26
30, 33
20
02
02
02, 21, 25, 38
Hanseatic
Hinari
07, 20, 25
19, 20
21
02, 07, 21
26, 40
05, 07, 08, 13, 15, 20, 22
12, 28
15
02, 04, 25
Hisawa
Hitachi
Huanyu
Hypson
ICE
15
26
28
21
19, 36
25, 26
20, 25
33
12
Sambers
Samsung
Sandra
BTC
Basic Line
Baur
01, 02, 20, 25, 27, 35
02, 21
03, 33
35
ICeS
ITT
21
33
23, 35, 38
10
23, 33
12, 20, 25
19
Sanyo
04, 07, 10, 18
Beko
Imperial
Inno Hit
Interfunk
Intervision
Isukai
Schaub Lorenz
Schneider
Sei-Sinudyne
Sentra
Sharp
Shorai
33
21, 23, 37
Binatone
Blaupunkt
Blue Sky
Blue Star
Bondstec
Boots
20
17
21
26
23
20
03
06
07, 11
21
07, 09
02, 19, 20, 21, 26
JVC
Kaisui
28
12
Siarem
Brandt
Britannia
Bush
CGE
CS Electronics
CTC
Carrefour
Cascade
Cimline
Clatronic
Condor
Contec
Crown
Cybertron
Daewoo
Dainichi
Dayton
De Graaf
Decca
Dixi
15
19
Kathrein
Kingsley
Koyoda
Leyco
Lloytron
Luxor
M Electronic
Magnadyne
Magnafon
Manesth
Marantz
Matsui
Memorex
Metz
Mitsubishi
Mivar
Multitech
Neckermann
Nikkai
Nobliko
Nokia
Nordmende
Oceanic
Orion
01
19
02
Siemens
Silver
17
07
12, 28
02, 07, 21, 26, 28, 36, 42
Sinudyne
Solavox
Sonitron
Sonoko
Sonolor
Sony
Soundwave
Standard
Sunkai
Susumu
Tandy
Tashiko
Tatung
23
19
23
07
02
02
10, 25, 28
05
18
02
18
05
33
02, 13, 15, 20, 32, 36, 41
12, 23
12
20, 25, 30
01
03, 04, 07
38
02, 20, 21
28, 31
21
10, 20, 21
23, 35
30, 35
02, 07, 19
02, 35, 38
02, 04, 06, 07, 10, 18, 20, 28, 39
02
34
07, 14, 16
19, 27
21
02, 36
07, 20
10, 20
20, 23
21
02
18
10
02
42
20
Tec
02, 12, 19
Technema
Technics
Telefunken
Telemeister
Teletech
Teleton
Tensai
30
24
15
30
02
20
01
05, 06, 10, 19, 21, 25
12
33, 41
15
33
28, 30, 31
Dual
Dual Tec
Elite
21, 30
21, 28, 29, 30
Elta
02
Texet
19, 21
Emerson
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Formenti
Frontech
Fujitsu
Funai
GEC
GPM
33
15
19, 33
18, 32
Osaki
Oso
Osume
Otake
Otto Versand
Palladium
Panama
Panasonic
Pathe Cinema
Pausa
Perdio
Phase
Philco
Philips
Pioneer
Profex
05, 10, 20, 21, 25
Thomson
Thorn
Tomashi
Toshiba
Uher
Ultravox
Universum
Videosat
Videotechnic
Visa
15
06, 10, 33
21
05, 10
26
06, 07
29
10, 13, 32
02, 19, 20, 23, 28, 31
01, 03, 07, 20, 30
30
12
35, 38
20, 25
24, 34
19, 30
02
18, 20, 35
40
13, 25, 32, 35
23
20
02
30
20
30
12
07
30
23, 25
10
25, 28
10, 20
21
30
05
23
Vision
Waltham
Watson
Watt Radio
Wega
White Westinghouse
Yoko
01, 36
15
02, 33
Geloso
Genexxa
02
21
19, 30
20, 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions on your video recorder
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
When you connect your video recorder to your television and plug it into the
mains, you will be welcomed with an OSD picture. All you have to do is follow
the instructions in the "intelligent help line" for the next step. Enjoy the Automatic
TV channel search/save function and the automatic time adjustment.
We guarantee that your video recorder will switch to the new millennium with
no problems whatsoever.
Recordings made on your video recorder can be controlled by an external
satellite receiver.
This function automatically transfers all the television channel settings onto
your video recorder.
Your video recorder can ascertain which channel is currently playing on your
television and record from it at the touch of a button.
Simple programming system for video recorders. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
The precision tape drive from Philips with short rewind times and automatic
tape length recognition.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. HOW TO CONNECT YOUR VIDEO RECORDER
f Insert one end of the mains cable into the mains socket
How to connect your video recorder to the
TV set
4 at the back of the video recorder and the other end
into the wall socket.
g When your TV set automatically switches to programme
number e.g.: ’EXT’, ’0’, or ’AV’, this text will appear on the
TV screen:
We recommend the use of a scart cable. This will give you the
best picture and sound quality.
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW
PHILIPS VIDEO RECORDER
TO CONTINUE PRESS OK
When you install your video recorder for the first time, please
read:
E If your TV set has a scart socket and you are using a
scart cable, please read the section ’Connecting with a
scart cable’.
DIf your TV set does not switch to programme number
e.g.: ’EXT’, ’0’, or ’AV’ automatically, select the
programme number for the video recorder manually
(see instruction manual TV set).
E The section ’Connecting without a scart cable’, when you
don’t use a scart cable.
h Then read ’Initial installation’ in chapter ’INSTALLING
Connecting with a scart cable
YOUR VIDEO RECORDER’.
a Switch off the TV set.
b Remove the aerial cable plug from your TV set and insert
it into the 2 socket at the back of the video recorder.
c Plug one end of the aerial cable provided into the
3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d Plug one end of the scart cable into the EXT.1 AV 1 scart
socket at the back of the video recorder and the other
end into the scart socket on your TV set (see instruction
manual TV set).
e Switch on the TV set.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting without a scart cable
Connecting a decoder or other equipment
You can connect additional equipment to the EXT.2 AV 2
socket. For example: a decoder, a satellite receiver or a
camera recorder.
a Switch off the TV set.
b Remove the aerial cable plug from your TV set and insert
it into the 2 socket at the back of the video recorder.
c Plug one end of the aerial cable provided into the
3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d Insert one end of the mains cable into the mains socket
4 at the back of the video recorder and plug the other
end into the wall socket.
e Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
f Tune in the TV set in the UHF wave band until the
following picture appears.
DThe video recorder will now send on channel
CH36/frequency 591MHz:
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW
PHILIPS VIDEO RECORDER
TO CONTINUE PRESS OK
g Then read ’Initial installation’ in the chapter ’INSTALLING
YOUR VIDEO RECORDER’.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLING YOUR VIDEO RECORDER
g Check if the TIME in line ’TIME’ is correct. If required,
Initial installation
change the time with the number buttons 0-9 on your
remote control.
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
h Confirm with the OK button.
i Check ’YEAR’, ’MONTH’ and ’DATE’. Confirm each line
with the OK button.
j After you have confirmed the line ’DATE, the video
recorder will switch to standby.
The initial installation is now complete.
DIf you have connected a decoder, you must install it
b Close the battery compartment.
as described in the next section.
DIf you have connected a satellite receiver, please
c Confirm the picture on the TV screen with the OK button
read the section ’satellite receiver’.
on the remote control.
d Select the language for the on-screen display (OSD) with
the P r or P q button.
Allocating a decoder
The display on the video recorder will only show English
text.
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your video recorder. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
e Confirm with the OK button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
a Switch on the TV set. If required, select the programme
number for the video recorder.
SEARCH
00
b Choose the television channel on which you wish to use
the decoder with the P q or P r buttons on the video
recorder or the number buttons 0-9 on the remote
control.
Wait until all TV channels have been found. This can take
several minutes.
c Press the MENU button on the remote control. The main
menu will appear.
f When all TV channels have been found, ’READY’ will
d Select the line ’MANUAL SEARCH’ with the P q or
appear on the TV screen.
P r button.
E ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ will appear on the TV
e Confirm with the OK button.
screen.
f Press the INDEX E button. ’DEC’ will appear in the
display.
TIME
YEAR
MONTH
DATE
20:00
1999
01
01
CH21
------------------------
-/+ 0-9 OK
g Confirm with the OK button.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
h To end, press the OK button again. Then, press the
TV/STANDBY m button.
f With the P q or P r button or with the number buttons
0-9 , select the programme number you want to give to
this TV channel, for instance, ’P01’.
This channel is now assigned to the decoder.
g Confirm with the OK button.
If you want to allocate more TV channels, repeat steps
d through g .
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
h To end, press the TV/STANDBY m button.
Channel number or frequency display
DWhen you search for TV channels manually, you can
choose between the indication for ’channel’ or
’frequency’. Please read the next paragraph
’Channel number or frequency display’.
You can switch between the display for ’channel number’ or
’frequency’ for manual channel search.
a Switch on the TV set. If required, select the programme
number for the video recorder.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button on the remote control. The main
menu will appear.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’CHANNEL/FREQUENCY’ with the
P r or P q button and confirm with the OK button.
c Select the line ’MANUAL SEARCH’ with the P q or
P r button and confirm with the OK button.
d With the P q button, select ’CHANNEL’or
’FREQUENCY’ and confirm with the OK button.
CH 26
P01
e To end, press the TV/STANDBY m button.
------------------------
SEARCH g+ 0-9 OK
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT.2 AV 2 .
To do this, select the channel number ’E2’ by pressing the
buttons P q or P r . You will have to select the channels to
d Hold the P q button until you have found the right TV
channel. A changing channel number or frequency will
appear on the screen.
DIf you know the frequency or channel number of the be received by the satellite receiver on the receiver itself.
desired TV channel, you can enter the information in
line with the number buttons 0-9 on the remote
control.
DTo enter a special/hyperband channel, you must
enter a ’9’ before the first channel digit. The
indication changes from ’CH’ to ’CA’. For example,
for special channel ’S 30’, enter ’9 30’.
DIf the picture or sound quality is poor, you might
have selected the wrong TV system. Press the
SYSTEM button to change the TV system.
e Confirm with the OK button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
g Wait until, for example, ’TV02’ appears.
Special installation functions
h Select the next programme number, for example, ’2’ on
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
the TV set.
i Confirm with the OK button on the video
recorder-remote control.
Automatic TV channel allocation (Follow
TV)
DIf you allocated the wrong TV channeL, you can go
back one step with the D/Sr button.
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket EXT.1 AV 1 ) and the TV set are connected
with a scart cable. You must switch off any equipment
connected to socket EXT.2 AV 2 .
j Repeat steps g to i until all TV channels have been
allocated.
k To end, press the TV/STANDBY m button.
Automatic TV channel search
a Switch on the TV set. If required, select the programme
number for the video recorder.
The video recorder will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
b Press the MENU button on the remote control. The main
menu will appear.
a Switch on the TV set. If required, select the programme
CLOCK
number for the video recorder.
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
b Press the MENU button on the remote control. The main
LANGUAGE
menu will appear.
FOLLOW TV
DIRECT RECORD
COUNTER
c Select the line ’AUTOSEARCH’ with the P r or P q
------------------------
-/+
OK
button.
d Press the OK button. The ’Automatic TV channel search’
c Select the line ’FOLLOW TV’ with the P r or P q
starts.
button.
d Press the OK button. ’TV01’ will appear on the video
recorder display.
SEARCH
00
TV01
e Select programme number ’1’ on the TV set.
e When the TV channel search is complete, ’READY’ will
f Confirm with the OK button on the video
recorder-remote control. The video recorder compares
the TV channels on the TV set and the video recorder.
If the video recorder found the same TV channel as the
TV set, then it stores it at ’P01’.
appear on the screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
DWhen ’NOTV’ (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read ’Manual TV channel
allocation’.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
c Select the line ’LANGUAGE’ and confirm with the OK
Monitor function
button.
You can switch backwards and forwards between TV picture
and video recorder picture with the MONITOR button. But this
only works when you use a scart cable to connect the video
recorder to your TV set and if your TV set responds to this
switch-over.
d Select your language with the P r or P q button and
confirm with the OK button.
e To end, press the TV/STANDBY m button.
Setting the time and date
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
DIf a TV channel which transmits TXT/PDC is stored
under programme number ’P01’, time and date will
automatically be taken from the TXT/PDC
information.
a Switch on the TV set. If required, select the programme
number for the video recorder.
If the time in the video recorder display is not
correct or if ’--:--’ appears in the display, please
set the clock manually.
b Press the MENU button on the remote control. The main
menu will appear.
a Switch on the TV set. If required, select the programme
c Select the line ’CHANNEL ALLOCATION’ with P r or
number for the video recorder.
P q button and confirm with the OK button.
b Press the MENU button on the remote control. The main
menu will appear.
P01
CH26
c Select the line ’CLOCK’ with the P r or P q button
and confirm with the OK button.
------------------------
-/+ CL OK
TIME
YEAR
MONTH
DATE
20:00
1999
01
01
d With the P r or P q button, select the TV channel to
which you want to give a programme number (starting
with ’P01’).
------------------------
-/+ 0-9 OK
e Confirm with the OK button.
d Check the time in line ’TIME’. If required, please change
DIf you want to delete a TV channel, press the
the time with the 0-9 buttons on the remote control.
CLEAR (CL), y button.
e Confirm with the OK button.
f Repeat steps dto euntil you have given a programme
number to all TV channels.
f Check ’YEAR’, ’MONTH’ and ’DATE’ in the same way.
Confirm each entry with the OK button.
g To end, press the TV/STANDBY m button.
g To end, press the TV/STANDBY m button.
Setting the language
You can select the language for the on-screen display (OSD).
The small display on the video recorder will only show english
text.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button on the remote control. The main
menu will appear.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. IMPORTANT NOTES FOR OPERATION
General information
The symbols on your video recorder display
DYou can switch on with the STOP h button, the
0-9 buttons or by putting in a cassette.
DIf you do not use the video recorder for a few
minutes, it will switch to standby automatically.
Please read the section ’Automatic switch-off (tuner
mode)’ in chapter ADDITIONAL FUNCTIONS.
These symbols can light up on your video recorder display:
DIf you have switched the video recorder off with the
TV/STANDBY m button, the time will show in the
display, for instance , ’18:00’.
This is where the current operating mode is shown
as a symbol.
When a satellite recording has been programmed.
If the clock has not been set, ’--:--’ will appear.
DKeep your video recorder connected to the mains at
all times to ensure that programmed recordings can
be made and that the television works normally.
DEC
When a decoder has been allocated to the TV
channel you have currently selected.
When you are recording a progamme.
DWhen the video recorder is not plugged into the
mains, it will usually store TV channels for a year,
and date and timer information for seven hours.
When you have programmed a recording or when a
programmed recording is being made.
D
When you have programmed daily recordings.
When you have programmed weekly recordings.
When you have put a cassette in the video recorder.
Saving energy
W
There are two ways to switch to standby.
Switching to standby with clock display: Switch to standby
using the TV/STANDBY m button. The time will be displayed.
To save energy: Press the TV/STANDBY m button twice. The
time will disappear from the display.
DATE When the date of the programmed recording is
shown.
START When the start time of the programmed recording is
shown.
PROG. When the programme number of the programmed
Emergency interrupt
recording is shown.
END
When the end time of the programmed recording is
shown.
You can use the TV/STANDBY m button on the video recorder
or the remote control to interrupt any function.
So if you are having operating problems, you can just interrupt
the function and start again.
And you can practise operating your set without any worries.
No matter which buttons you press, you cannot damage it.
Video programming system / programme delivery
control: when a VPS or PDC code is being
transmitted.
Display of programme number / tape position /
channel name / function.
Tape position in seconds, but only if the display
mode ’LINEAR COUNTER’ has been selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary of user guide
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
TIME
YEAR
MONTH
DATE
20:00
1999
01
01
LANGUAGE
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+ 0-9 OK
------------------------
-/+
OK
MAIN MENU
Chapter: INSTALLING YOUR VIDEO RECORDER -
’Setting the date and the time’
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
OSD
ON
OFF
------------------------
-/+
OK
Chapter: ADDITIONAL FUNCTIONS - ’Switching OSD
Information on or off’
E To call up the menu: With the MENU button.
E To select a line: With the P r or P q button.
E To enter or change your selection: With the 0-9 , P r
P01
CH26
or P q button.
E To cancel: With the MENU button.
E To save or confirm: With the OK button.
E To close the menu: With the TV/STANDBY m button.
------------------------
-/+ CL OK
Chapter: INSTALLING YOUR VIDEO RECORDER -
’Sorting and clearing TV channels manually’
CHANNEL
FREQUENCY
------------------------
-/+
OK
Chapter: ’INSTALLING YOUR VIDEO RECORDER -
’Channel number or frequency display’
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PLAYBACK FUNCTIONS
a Switch on the TV set. If required, select the programme
Playing a cassette
number for the video recorder.
a Put a cassette into the cassette slot. ’v’ will appear on
b Press the MENU button on the remote control. The main
the display.
menu will appear.
c Select the line ’COUNTER’ with the P q or P r button
and confirm with the OK button.
d Select the type of counter with the P q button and
confirm with the OK button.
DTo reset the tape position ’LINEAR COUNTER’to
’0:00:00’, press the CLEAR (CL), y button.
e To end, press the TV/STANDBY m button.
b Press the PLAY G button.
DThis video recorder will automatically recognise the
length of the tape.
c To stop, press the STOP h button.
DWhen you put a cassette in the video recorder and
you want to see ’TIME LEFT’, the video recorder
must first calculate the time played. Therefore, ’-:--’
appears first and only after the tape has been
running for a few seconds the playing time will be
shown.
d To eject the cassette, press the STOP/EJECT ? button
on the video recorder.
DSome functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
DIf the video recorder does not find a recording at a
certain tape position with ’LINEAR COUNTER’
switched on, the counter will stop.
Playing NTSC cassettes
Searching for tape position with the picture
(picture search)
With this set you can playback cassettes that have been
recorded on another video recorder in the NTSC standard (for
example, American cassettes). But this only works for
PAL-television sets which are suitable for a picture frequency
of 60 Hz.
a While a cassette is playing, press the [ (reverse) or
I (forward) button once or several times.
DSome special features (for example, still picture) are
not possible while you are playing an NTSC
cassette.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
so good and there will be no sound.
Still picture
Tape position indication
a Press the STILL R button. A still picture will appear on
the screen.
By pressing the OK button, you can show the present tape
position on the TV screen.
Interference stripes will appear on the screen.
If you want to see the tape position, you can select ’LINEAR
COUNTER’ (to show the present position on the tape in hours,
minutes and seconds) or ’TIME LEFT’.
b Each time you press STILL R again, the picture will
move on one step.
DWhen you play an NTSC cassette, the video
recorder will only show ’LINEAR COUNTER’.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for tape position without the
picture (wind and rewind)
Automatic search for a blank space on the
tape
a Stop the tape with the STOP h button.
b Press the [ (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
Instant View
You can search for a space on the tape (at least 1 minute of
blank tape) for a new recording, for example, after an existing
recording on the tape.
a Press the INDEX E button. Then press the STOP h
button.
b When the video recorder find a blank space, it will
automatically switch to ’pause’.
With this function you can switch to picture search during
wind and rewind.
DIf no empty space has been found when the end of
the tape is reached, the cassette will be ejected.
a If you hold the [ (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
b When you release the button, the video recorder will
automatically switch back to rewind or wind.
Automatic search for a tape position
(index search)
At the start of each recording, the video recorder will write an
index code on the tape.
a Press the INDEX E button and then the I button to
select the next code mark or the [ button for the
previous code mark.
b When the video recorder finds the code mark, it will
automatically switch to play.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture interference
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
a While a cassette is playing, hold the P q button until
’TRAC’ (tracking) appears on the display.
b Hold the P r or P q button until the picture quality is
at its best.
c Wait a few seconds, until ’TRAC’ disappears from the
display. This picture setting will not change until you
eject the cassette.
Tracking during still picture
If the still picture vibrates vertically, you can improve the still
picture as follows:
a During still picture, hold the P q or P r button until
the picture quality is at its best.
The video recorder will store this setting automatically.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
a While a cassette is playing, hold the PLAY G button until
’HEAD’ appears on the display. The video heads will now
be cleaned. The video recorder will automatically switch
to play again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for
example, a programme currently being shown).
Recording with automatic switch-off
(OTR one-touch-recording)
E If you want to start and stop a recording manually, read
the section: ’Recording without automatic switch-off’.
a Put a cassette in the machine.
E If you want to start a recording manually but have it
stopped automatically, read the section: ’Recording with
automatic switch-off’.
b Use the P q or P r button to select the programme
number you want to record.
E If you want to record a programme currently being
shown, read the section ’Direct record’.
c Press the RECORD/OTR n button on the remote control.
E If you want a recording to be controlled automatically by
a satellite receiver, read the section entitled ’Automatic
recording from a satellite receiver’.
d Press the RECORD/OTR n button again and again until the
display on the video recorder shows the desired end time
or length of the recording.
DTo cancel this information, press the
Recording without automatic switch-off
CLEAR (CL), y button.
a Insert a cassette.
Protecting your recordings
b Use the P q or P r button to select the programme
number you want to record, for example, ’P01’. On the
display appears:
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
BBC1
DWhen a TV channel transmits a channel name, it will
show on the video recorder display.
DProgramme numbers ’E1’ and ’E2’ are for recording
from other sources (through scart sockets
EXT.1 AV 1 and EXT.2 AV 2 ).
c To start recording, press the RECORD/OTR n button on the
remote control or RECORD n on the video recorder. On
the display you will see:
0:00
d Stop recording with the STOP h button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto-assembling
Switching on ’Direct Record’
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
When this function is switched on, the video recorder will
automatically record the programme selected on the television
by means of a scart cable.
DThe video recorder must be switched off .
a While the cassette is playing, search for the correct
position on the tape.
a Switch on the TV set and select the programme number
for the video recorder.
b Stop the cassette by pressing the STOP h button. ’9’
will appear in the display.
b Press the MENU button on the remote control. The main
menu will appear.
c Now start recording as usual by pressing the
RECORD/OTR n button on the remote control.
c Select the line ’DIRECT RECORD’ with the P r or
P q button.
Automatic recording from a satellite
receiver (SAT RECORDING)
d Confirm with the OK button.
e Select the function ’ON’ with the P q button. If you
select ’OFF’, the function will be switched off.
You can only use this function, when you have a satellite
receiver which can control other equipment by a
’programming’ function.
f Confirm with the OK button.
g On the TV set, select the programme number you want to
a Use a scart cable to connect the scart socket
record from.
EXT.2 AV 2 to the scart socket on the satellite receiver.
h Press the RECORD/OTR n button with the video recorder
b Put a cassette in the machine. Switch off with the
switched off.
TV/STANDBY m button on the remote control.
DDon’t select another programme number on your TV
set, until the ’search symbol’ on the video recorder
display has disappeared. This can take up to one
minute.
c Hold the MONITOR buton on the remote control, until
’SAT.P’ appears on the video recorder display.
The video recorder is now ready to record. The
EXT.2 AV 2 plug controls the start and the end of the
recording.
DIf ’NOTV’ appears on the video recorder display, this
means the video recorder cannot find this
programme number. In this case, read the section
’Recording without automatic switch-off’.
DWhen this function is switched on and the video
recorder is switched off, ’x’ appears on the video
recorder display.
DIf you want to cancel this function before the
recording has started, you must hold the
MONITOR button until ’SAT.P’ disappears.
DIf you want to cancel this function while a
programme is being recorded, press the
TV/STANDBY m button on the remote control.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
6. PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
c Enter the entire SHOWVIEW-number (up to 9 digits)
printed in your TV guide next to the start time of a TV
programme.
For example, 5-312-4 or 5 312 4
To make a programmed recording, your video recorder needs
to know:
Enter 53124 for the SHOWVIEW-number.
If you make a mistake, you can clear your instructions
with the CLEAR (CL), y button.
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
SHOWVIEW
* the start and stop time of the recording;
* whether you want to use VPS or PDC
53124----
ONCE
The video recorder stores all the information in a TIMER block.
You can programme up to 6 TIMER blocks a month in advance.
------------------------
D/WgSELECT
CLEAR gCL
0-9
OK
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
d Use the SELECT button to select daily or weekly
programming.
’D’: recordings every day from Monday to Friday.
’W’: recordings every week on the same day of the week.
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the video recorder
switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
e Confirm with the OK button. Your programming details
will then appear on the TV screen.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
DATE PROG START V/P END
01
01 20:00
21:30
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
------------------------
CHANGE gTIMER CLEAR gCL
V/P
g
SELECT OK
Programming a recording
(with ’SHOWVIEW’)
DIf SHOWVIEW does not recognise the TV channel,
’SELECT PROG’ will appear on the TV screen.
Instead of ’E2’, you can select the programme
number you want with the number buttons 0-9 and
confirm with the OK button.
All the important information needed for a programming is
contained in the SHOWVIEW-programming number.
DIf ’CODE ERROR’ appears on the TV screen, this
means you entered an incorrect SHOWVIEW-code
number or the incorrect date. Correct your
instructions or end with the TIMER button.
DIf ’DAILY ERROR’ appears on the TV screen, the
date was incorrectly entered. Daily programming
can only be used for recordings to be made from
Monday to Friday.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control.
DUse the SELECT button to switch ’VPS/PDC’ on or
off.
DIf you want to set a later end time for a recording,
press the P q button. Each time you press the
P q button, you will add 15 minutes to the end time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
f Confirm with the OK button when the information is
Programming a recording
(without ’SHOWVIEW’)
correct.
DThe programming information has been stored in a
TIMER block.
a Switch on the TV set and select the programme number
for the video recorder.
g Make sure that the cassette you have put in can be
recorded on.
b Press the TIMER button on the remote control twice .
h Switch off with the TV/STANDBY m button.
The programmed recording will only function when the
video recorder is switched off with the TV/STANDBY m
button.
c Select a free TIMER block with the P q or P r button.
Press the TIMER button.
DIf any of the TIMER blocks are in use, ’k’ will lights
DATE PROG START V/P END
up on the video recorder display.
01
01 20:00
21:30
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY m button.
------------------------
NEXT
gTIMER CLEAR gCL
-/+ 0-9 D/WgSELECT OK
DIf the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’TIMER RECORD’ will flash on the TV
screen.
d With the TIMER , C/Sq or D/Sr button you
can select ’DATE’ (date), ’PROG’ (programme number),
’START’ (start time) and ’END’ (end time).
Enter or change your information with the P q or
P r button, or with the number buttons 0-9 .
DIf you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
DUnder ’DATE’, use the SELECT button to select daily
or weekly programming.
DIf you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’k’ will flash on the
video recorder display.
’D’: Recording from Monday to Friday.
’W’: Recordings every week on the same day.
DUnder ’START’, use the SELECT button to switch
DIf you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
’VPS or PDC’ on or off.
e Confirm with the OK button when the information is
DIf ’TIMER FULL’ appears on the TV screen when
you press the TIMER button, you have used up all
the available TIMER blocks. If you want to clear or
check a TIMER block, select it with the P q or
P r button.
correct.
DThe programming information has been stored in a
TIMER block.
f Make sure that the cassette you have put in can be
DProgramme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
EXT.1 AV 1 or EXT.2 AV 2 ).
recorded on.
g Switch off with the TV/STANDBY m button.
The programmed recording will only function when the
video recorder is switched off with the TV/STANDBY m
button.
DIf any of the TIMER blocks are in use, ’k’ will lights
up on the video recorder display.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBY m button.
h Make sure that the cassette you have put in can be
recorded on. Switch off with the TV/STANDBY m button.
DThe programmed recording will only function when
the video recorder is switched off with the
TV/STANDBY m button.
DIf the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’TIMER RECORD’ will flash on the TV
screen.
How to clear a programmed recording
(TIMER)
DIf you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
a Switch on the TV set and select the programme number
DIf you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’k’ will flash on the
video recorder display.
for the video recorder.
b Press the TIMER button on the remote control twice.
DIf you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
c Select the programmed recording (TIMER) you want to
clear with the P r or P q button.
DIf ’TIMER FULL’ appears on the TV screen when
you press the TIMER button, you have used up all
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the P q or P r button.
d Press the CLEAR (CL), y button.
e Confirm with the OK button.
DProgramme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
EXT.1 AV 1 or EXT.2 AV 2 ).
How to check or change a programmed
recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice.
c Select the programmed recording (TIMER) you want to
check or change with the P q or P r button.
d Press the TIMER button.
e Select the entry field with the D/Sr or C/Sq
button.
f Change any information with the P r or P q button or
with the 0-9 buttons.
g Confirm with the OK button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7. ADDITIONAL FUNCTIONS
Switching the TV system
Automatic switch-off (tuner mode)
If you play recordings made on another video recorder or if
you record from another source, this may lead to problems
If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
with the automatic TV system switch-over. You can switch off automatically. You can cancel this function to use the video
the automatic TV system switch-over as follows. recorder as a television receiver (tuner).
a Select the TV system with the SYSTEM button before you a Hold the STOP h button until +appears on the video
start recording, or while you play a cassette.
recorder display.
b If you select a different programme number or eject the
cassette, the video recorder will automatically switch to
’automatic’ again.
b Select the programme number you want with the P r or
P q button or with the number buttons 0-9 .
c Switch off the video recorder with the TV/STANDBY m
button, if you no longer want to watch TV.
Setting the on-screen display (OSD)
You can switch the on-screen display of the current operating
information on or off.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the MENU button on the remote control. The main
menu will appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
LANGUAGE
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+
OK
c Select the line ’OSD’ with the P r or P q buttons and
confirm with the OK button.
d Select one of the options shown with the P q button.
’ON’: Shows the OSD for a few seconds only.
’OFF’: Switches off the OSD.
e Confirm with the OK button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching off the modulator
Reducing picture disturbance (’optimizing
the modulator’)
If you cannot clear picture or sound interference, you can
switch off the built-in modulator.
You should only do this if you have connected the video
recorder to the TV set with a scart cable. ’Connecting VCR
without scart cable’ is not possible when the modulator is
switched off.
You may experience picture disturbance if you have not used
a scart cable to connect your video recorder and TV. This is
because another TV station in your reception area may
already be using UHF-channel CH36 or 591MHz.
a Switch on the TV set and select the programme number
a Make sure that there is no cassette in the video recorder.
With the video recorder switched off hold the SYSTEM
button for a few seconds until the modulator frequency,
for example, ’G591’ (591 Mhz or channel 36) appears on
the video recorder display. The video recorder will then
transmit a test picture channel or frequency.
for the video recorder.
b Make sure that no cassette is in the video recorder.
Press the SYSTEM button for several seconds, until, for
example, ’G591’ appears on the video recorder display.
c Hold the CLEAR (CL), y button, until ’MOFF’ (modulator
off) appears on the video recorder display. If you want to
switch the modulator on again, hold the CLEAR (CL), y
button, until ’G591’ (Modulator switched on) appears on
the display.
MODULATOR
591 G
------------------------
-/+
G/KgSELECT
ON/OFF
gCL OK
d To end, press the TV/STANDBY m button.
b Change the modulator frequency with the P r or
P q button.
c Confirm the new modulator frequency with the OK
button.
d Tune in the TV set to this channel or frequency.
e To end, press the TV/STANDBY m button.
DIf the picture or sound quality is poor, you may have
selected the wrong TV system. At step a , select
the TV system ’G591’ for PAL-B,G or ’K591’ for
SECAM-D,K, using the SELECT button. If you want to
switch the modulator on again, hold the
CLEAR (CL), y button, until ’G591’ (Modulator
switched on) appears on the display.
f To end, press the TV/STANDBY m button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Before you call an engineer
If, contrary to expectation, you have any problems using this
video recorder, it may be caused by one of the reasons
mentioned below. You can also call the customer service
centre in your country.
You will find the phone number in the enclosed guarantee
leaflet.
Programmed recording does not work:
•
You have not set the TIMER properly: check the TIMER blocks.
You have programmed the wrong time or date: check time and
date.
•
•
•
•
You have put in a cassette that cannot be recorded on: undo the
erase protection on the cassette.
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC
or VPS time exactly to the minute. Have your aerial checked.
After a ’programmed recording with ’SHOWVIEW’, the
programme number of the TIMER block will not agree with the
required programme number: when you have confirmed the
SHOWVIEW programming number, confirm the TIMER block by
pressing the TIMER button. Then change the programme
number displayed in the ’PROG’ entry field and confirm by
pressing the TIMER button.
Your video recorder does not respond to any button being
pressed:
•
There is no power supply: check the power supply
A programmed recording is currently being made: cancel the
programmed recording with the TV/STANDBY m button.
There is a technical problem: switch off the mains power supply
for 30 seconds, then switch it on again. If this does not have any
effect, you can:
•
•
There is picture or sound interference on TV reception:
1. Switch off the mains power supply again.
•
Turn to chapter ’ADDITIONAL FUNCTIONS’ and read ’Poor TV
reception - optimising the modulator’ and ’Switching off the
modulator’.
2. Then switch it on whilst holding down the STANDBY m button
on the video recorder.
3. Release the button when ’MENU’ appears on the video
recorder display. All the information stored (TV channels, time
and date, TIMER) will be cleared.
•
Have your aerial checked.
Cassette is jammed in the video recorder:
•
Don’t use force. Pull out the mains plug for a moment.
Remote control does not work:
•
Remote control not pointed toward the video recorder: point it at
the video recorder.
•
•
Batteries have run out: change the batteries.
You have given the wrong remote control command: read
’Switching remote control command’ in chapter ’Additional
functions’.
No picture when you play a cassette:
•
There is no recording on the cassette: change the cassette.
You have chosen the wrong programme number on the TV for
playing cassette: on the TV, select the correct programme
number for the video recorder.
•
•
The cable connecting the TV set and the video recorder has
come loose: check the cable.
Poor picture quality when you play a cassette:
•
•
•
Your TV set is not properly adjusted.
The cassette badly worn or of poor quality: use new cassette.
Tracking is not properly adjusted or the video heads are dirty:
turn to chapter ’PLAYBACK’ and read the section ’Cleaning the
video heads’.
The video recorder will not record:
•
The TV channel you want to record is not stored or you selected
the wrong programme number: check TV channels stored.
You have loaded a cassette which cannot be recorded on: undo
the erase protection on the cassette.
•
22
Download from Www.Somanuals.com. All Manuals Search And Download.
9. GLOSSARY
Technical terms used
Current tape position : The part of the tape currently being
played.
External source : A device connected via a socket (for
example, scart socket) which is transmitting audio/video
signals to the video recorder.
Index marking : A marking which is automatically made on the
tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search
function.
Scart cable : Also known as a Euro-AV cable. This standard
cable is an easy method of connecting various audio and
video devices, computer screens and televisions. Other
signals in addition to audio and video signals can be
transmitted on it.
TV system : There are various systems for transmitting
television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television
depends on which country you are in.
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select
the switch-off time in intervals of 30 minutes.
Modulator : An electronic component in a video recorder
which allows audio and video signals to be transmitted via the
aerial cable. Your television receives the signal in the same
way as a signal from a television station.
Modulator frequency : This frequency or channel indicates the
frequency or channel on which the audio or video signal is
transmitted.
UHF frequency range : Channels 21 to 69. The video recorder
’broadcasts’ on channel 36/frequency 591 MHz. This frequency
or channel can be changed. See the section ’Reducing picture
disturbance (’optimizing the modulator’).
OSD (On-screen display) : The largest possible display area
for the video recorder - the screen on your television set.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|