Thank you for purchasing a Philips Magnavox 3 device univer-
sal remote control. This universal remote control will operate
your Television,Video Cassette Recorder, and Cable Converter
Box. Before you can use your new remote control, you will
need to program it to operate the specific components you
wish to control. This remote features:
•
Channel Scan, a convenient way to "channel surf"
by scanning channels.
•
Auto Scan code search to help program remote
control for a variety of components, including
older/discontinued models.
REM110
Universal Remote
•
•
Built-in Sleep Timer.
Controls for basic functions, including Power,
Channel Selection,Volume, Play and Record.
KEYS AND FUNCTIO NS
2
1
3
5
8
4
7
4
6
3
9
9
11
10
12
12
14
13
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Punch Through
Program m ing W ith Auto Scan
The VCR Transport keys (e.g., REW, PLAY, FFW D, REC, STO P,
AND PAUSE) are set at the factory to control the VCR even if TV or
CBL is the selected mode. In other words,VCR control "punches
through" regardless of what mode is on. Moreover, you do not have to
press VCR before pressing the mode key.
If your component does not respond to the remote control after try-
ing all codes listed for your brand, or if your brand is not listed at all,
try searching for your code using Auto Scan. For example, to search
for a code for a TV:
1.
On the remote control, press TV once.
Sleep Feature
2.
Press and hold SET until the red light blinks twice, then
release SET.
Press SLEEP key to activate your component’s internal sleep timer.
(May not be available for all components.) If the component does not
have a sleep function, the first press of the SLEEP key activates the
remote’s built-in sleep timer. Timer can be set to a maximum of 90
minutes.
3.
4.
Aim the remote control at the TV and press SCAN. The
red light will blink twice.
Continue aiming the remote control at the TV (which
may take up to 5 minutes) until it turns off. Immediately
press any key except VO L-, SCAN, or SET.
To Set the Rem ote’s Built-in Tim er
If SCAN is pressed again after any key stops Auto Scan, the remote
will continue Auto Scan of the next ID from where it stopped.
1.
Press SLEEP key once, 15 minute timer is set. Red light
blinks once.
If you have passed by the code that turns off the TV, press VO L- one
2.
Additional key presses within 10 seconds will increase
the timer value in 15 minute increments up to a maxi-
mum of 90 minutes. For each press of the SLEEP key,
the red light will blink to indicate how many 15 minute
increments have been programmed, e.g., one blink for
first press, two blinks for the second press, etc. Sleep
timer activates 10 seconds after the last press of the
SLEEP key. The red light will blink once every 15 sec-
onds to indicate that the timer is running.
or more times until the TV turns on again.
5.
6.
To lock in the code and exit Auto Scan, press and release
SET the red light will blink twice.
To search for codes of other components, repeat steps 2
through 5, but substitute the appropriate key (e.g.,VCR,
CBL) for the (VCR or Cable) component you are search-
ing for.
NOTES: In the search mode, the remote will send IR (infrared)
codes from its library to the selected device, starting with the most
popular code first.
NOTE: Once the sleep timer is running, the sleep timer is automati-
cally canceled if any other key is pressed. The remote IR must be
pointed to the component to turn off component when timer ends.
Checking the Auto Scan Codes
If you have set up the remote control using Auto Scan, you can now
find out which four-digit code is operating your component:
To Activate Built-in Sleep Tim er if com ponent has
Sleep function
1.
2.
3.
On the remote control, press a component key once
(e.g., TV,VCR, CBL).
1.
2.
3.
On the remote control, press a component key once
(e.g., TV,VCR,CBL).
Press and hold SET until the red light blinks twice, then
release SET.
Press and hold SET until the red light blinks twice, then
release SET.
Enter 9-9-0. The red light will blink twice.
Enter 9-7-0. The red light will blink twice.
4.
To view the code for the first digit, press 1 once. Wait
3 seconds, count the red light blinks (e. g., 3 blinks = 3)
and write down the number.
4.
Follow instructions above to Set Timer.
To reset to component Sleep function follow steps 1 through 3 above.
At the end of step three, the red light will blink four times to indicate
the remote is reset to component Sleep function.
NOTE: If a code digit is "0" , the red light will not blink.
5.
Repeat step 4 three more times for remaining digits. Use
2 for the second digit, 3 for the third digit and 4 for the
fourth digit.
6.
To find codes of other components, repeat steps 1
through 5, but substitute the appropriate key (e.g., VCR
or CBL) for the component you are checking. As
before, write down each four-digit code.
ABO UT OTHER FEATURES
Volum e Lock
The remote control is set at the factory to control the volume inde-
pendently while in the TV,VCR, and CBL modes.
To control the volume from one mode (e. g., TV) while in another
mode (e.g., VCR or CBL), perform the instructions below to lock the
volume setting.
1.
On the remote control, press TV once.
2.
Press and hold SET until the red light blinks twice, then
release SET.
3.
Press VO L+. The red light will blink twice.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Q UICK FEATURES SETUP GUIDE
TRO UBLESHO OTING
PRO BLEM:
This guide is provided here for your convenience as a quick refer-
ence for performing remote control sequences.
SO LUTIO N:
Red Indicator Light does not
blink when you press a key.
Replace the batteries with two
(2) "AA" alkaline batteries (see
Page 4).
Component Setup
#
#
#
#
x 2
The VO L+,VO L- and MUTE
keys are not functional.
Make sure that the volume con-
trol is locked to a component
that has volume capabilities and is
programmed into the remote
control.
x 2
Turn on
component
(e.g., TV).
Press component
key once
(e.g., TV).
Press SET
until Red Light
blinks twice;
release SET.
Enter 4-digit code Press POWER
for your brand;
Red Light blinks
twice after last #. repeat steps
with next code.
once; if no
response,
1
2
3
4
5
Red Indicator Light blinks when
you press a key, but home enter-
tainment component does not
respond.
Make sure you are aiming the
remote control at your home
entertainment component and
that you are within 15 feet of the
component you are trying to
control.
Auto Scan
x 2
x 2
Turn on
component
(e.g., TV).
Press component
key once
(e.g., TV).
Press SET
Aim remote at
Press SET
until Red Light component; press until Red Light
blinks twice;
release SET.
SCAN once. When blinks twice;
off, press any
key* to stop.
release SET
to lock code.
* NOTE: Not VOL-, SCAN, or SET.
1
2
3
4
5
The remote control does not
control home entertainment
components or commands are
not working properly.
Try all listed codes for the com-
ponent brand being set up. Make
sure all components can be oper-
ated with an infrared remote
control.
Code Verification
x 2
x 2
CH+, CH- and LAST do not
work for your RCA TV.
Due to an RCA design (1983-
1987), only the original remote
control will operate these func-
tions.
Press component
key once
(e.g., TV).
Press SET
until Red Light
blinks twice;
release SET.
Enter 9-9-0;
the Red Light
will blink twice.
Press 1 once for 1st digit.
Wait 3 sec. and count blinks.
Number of blinks equals
value of code digit.
Repeat with 2, 3, and 4.
1
2
3
4
Changing channels does not
work properly.
If original remote control
required pressing ENTER to
change channels, to change chan-
nels, press ENTER on the
remote after entering a channel
number.
Volume Lock
x 2
Press component*
key once (e.g., CBL).
Press SET
until Red Light
blinks twice;
release SET.
Press VOL+ once.
Volume now controlled
through component
selected in step 1.
* NOTE: Component must have
volume capabilities.
Tried Auto Scan and still could
not find a working code.
Try Auto Scan again after clearing
out the component key as fol-
lows: Press and hold SET until
Red Light blinks twice, then
1
2
3
release. Next enter 9-9-2. Then
press and release the component
key to be cleared twice.
NOTE: To clear all set up codes and restore functions to Default,
press SET until red light blinks twice, release SET and enter 9-8-1.
Caution:When this clear feature is performed, please note that all of
your set up codes will be reset to the default codes and you will need
to reprogram components.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Inteq
0046
SETUP CO DES FO R TELEVISIO N
CÓDIGOS DE PROGRAMACIÓN PARA TELEVISIÓN
CODES DE PROGRAMMATION DU TÉLÉVISEUR
JBL
0083
JCB
0029
AOC
0048, 0059
0122, 0492
0121
JVC
0082
Admiral
Aiko
KEC
0209
KTV
0059, 0209
Akai
0059
Kenwood
LG
0048, 0059
Alaron
0208
0085
America Action
Anam
0209
LXI
0076, 0083, 0183, 0185, 0207
0045
0209
Logik
Audiovox
Baysonic
Belcor
0121, 0209, 0480
0209
Luxman
MGA
0085
0048, 0059, 0179, 0207
0048, 0059, 0085, 0089
0059, 0083*, 0208
0045
0048
MTC
Bell & Howel
Bradford
Brockwood
Broksonic
CXC
0045, 0183
0209
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
0048
0059, 0083
0265, 0492
0209
0279
0174, 0207
Candle
0059, 0085
0059
0045, 0085, 0179, 0183, 0207,
0279, 0492
Carnivale
Carver
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
0046, 0076, 0080
0050
0083
Celebrity
Cineral
0029
0048, 0122, 0179, 0207
0122
0121, 0480
0059, 0085, 0089, 0121
0085
Citizen
0209
Concerto
Contec
0185, 0195, 0207
0048, 0059, 0085
0121
0209
NEC
Craig
0209
NTC
Crosley
Crown
0083
Nikko
0059, 0121, 0207
0209
0209
Onwa
Curtis Mathes
0045, 0059, 0076, 0080, 0083,
0085, 0089, 0122, 0174, 0183,
0195, 0480
Optimus
Optonica
Orion
0183, 0195, 0279
0122
Daewoo
Daytron
Denon
0048, 0121, 0480
0048
0208, 0265, 0492
0080, 0279
Panasonic
Penney
0174
0048, 0050, 0059, 0076, 0080,
0085, 0089, 0185, 0207
Dumont
Electroband
Emerson
0046, 0048
0029
Philco
Philips
Pilot
0048, 0059, 0083, 0174, 0492
0048, 0183, 0207, 0208, 0209,
0265, 0492
0083
0048, 0059
0195
Envision
Fisher
0059
Pioneer
Portland
Prism
0183
0048, 0121
0080
Fujitsu
Funai
0208
0200, 0208, 0209
0209
Proscan
Proton
Pulsar
0076
Futuretech
GE
0207
0050, 0076, 0080, 0122, 0207,
0480
0046, 0048
0080, 0279
Quasar
RCA
Gibralter
0046, 0048, 0059
0048, 0059, 0085, 0207
0082, 0085
0208, 0209
0207
0048, 0076, 0080, 0119, 0122,
1476
GoldStar
Gradiente
Grunpy
Radio Shack
Realistic
0048, 0059, 0076, 0085, 0183,
0207, 0209
Hallmark
Harley Davidson
Harman/Kardon
Harvard
0048, 0059, 0085, 0183, 0207,
0209
0208
Runco
SSS
0046, 0059
0048, 0209
0059
0083
0209
Sampo
Hitachi
0045, 0085, 0174
0083
Infinity
* Default code
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung
Sansei
Sansui
Sanyo
0048, 0059, 0085, 0089, 0207
Canon
0064
0480
Carver
0110
0492
Cineral
0307
0183
Citizen
0066, 0307
Scimitsu
Scotch
Scott
0048
Colt
0101
0207
Craig
0066, 0076, 0101, 0269, 0300
0048, 0207, 0208, 0209, 0265
Curtis Mathes
Cybernex
Daewoo
Denon
0064, 0089, 0191
0269
Sears
0076, 0083, 0085, 0183, 0185,
0200, 0207, 0208
0074, 0307
0071
Semivox
Semp
0209
0185
Dynatech
Electrohome
Electrophonic
Emerex
0029
Sharp
0122
0066
Shogun
0048
0066
Signature
Sony
0045
0061
0029
Emerson
0029, 0031, 0066, 0072, 0150,
0213, 0238, 0307
Soundesign
Squareview
Starlite
0207, 0208, 0209
0200
Fisher
0076, 0133
0064
0209
Fuji
Supreme
Sylvania
Symphonic
TMK
0029
Funai
0029
0059, 0083
0200
GE
0064, 0077, 0089, 0269
0029
Garrard
GoldStar
Gradiente
HI-Q
0085, 0207
0122
0066
Tandy
0029
Technics
Technol Ace
Techwood
Teknika
0080, 0279
0208
0076
Harley Davidson
Harman/Kardon
Harwood
Hitachi
0029
0080, 0085
0110
0045, 0048, 0083, 0085, 0089,
0121, 0179, 0208, 0209
0101
0029, 0071
0071
Telefunken
Toshiba
0085
Hughes Network Systems
JVC
0089, 0183, 0185
0059
0096
Vector Research
Victor
KEC
0066, 0307
0101
0082
KLH
Vidikron
Vidtech
0083
Kenwood
Kodak
0096
0048, 0207
0064, 0066
0066
Wards
0045, 0048, 0050, 0059, 0083,
0085, 0207, 0208
LXI
Lloyd’s
0029
White Westinghouse
Yamaha
0492
Logik
0101
0048, 0059
MEI
0064
Zenith
0045, 0046, 0121, 0492
MGA
0072, 0269
0269
MGN Technology
MTC
SETUP CO DES FO R VCR
CÓDIGOS DE PROGRAMACIÓN PARA VIDEOCASETERA.
CODES DE PROGRAMMATION DU MAGNÉTOSCOPE.
0029, 0269
0307
Magnasonic
Magnavox
Magnin
0029, 0064, 0068, 0110*
0269
Admira
0077, 0238
Adventura
Aiko
0029
Marantz
Marta
0064, 0110
0066
0307
Aiwa
0029, 0066
Matsushita
Memorex
0064, 0191
America Action
American High
Asha
0307
0029, 0064, 0066, 0068, 0076,
0077, 0133, 0238, 0269, 1191
0064
0269
Minolta
Mitsubishi
Motorola
Multitech
NEC
0071
Audiovox
Beaumark
Bell & Howell
Broksonic
CCE
0066
0072, 0077, 0096
0064, 0077
0029, 0101
0096, 0133
0066
0269
0133
0031, 0150, 0213, 0238
0101, 0307
Nikko
* Default code
Calix
0066
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Noblex
Olympus
Optimus
Orion
0269
SETUP CO DES FO R CABLE
0064
CÓDIGOS DE PROGRAMACIÓN PARA CABLE
CODES DE PROGRAMMATION DU CÂBLORÉCEPTEUR
0066, 0077, 0133, 0191, 1191
0031, 0213, 0238
ABC
0032, 0036, 0037, 0043, 0046
Panasonic
Penney
Pentax
0064, 0191, 0254, 1191
Americast
Archer
0928
0064, 0066, 0071, 0269
0826
0071
Bell & Howell
Bell South
Contec
0043
Philco
0064, 0238
0928
Philips
0064, 0110
0048
Pilot
0066
Emerson
Everquest
Gemini
0826
Pioneer
Profitronic
Proscan
Protec
0096
0044
0269
0044, 0826
0305, 0505, 0839
0173
0089
General Instrument
GoldStar
Goodmind
Hamlin
0101
Pulsar
0068
0826
Quasar
RCA
0064, 0191, 1191
0049
0064, 0071, 0077, 0089, 0269
Hytex
0036
Radio Shack
Radix
0029
0066
0066
Jasco
0044
Jerrold
0032*, 0041, 0043, 0044,
0305, 0505, 0839
Randex
Realistic
Magnavox
Memorex
Oak
0056
0029, 0064, 0066, 0076, 0077,
0133
0029
Runco
STS
0068
0036, 0048
0029, 0136
0029
0071
Panasonic
Paragon
Philips
Samsung
Sanky
Sansui
Sanyo
Scott
0074, 0269
0068, 0077
0056
0029, 0096, 0238, 0300
0076, 0133, 0269
0072, 0074, 0150, 0213
Pioneer
Pulsar
0173, 0562, 0906
0029
Quasar
0029
Sears
0029, 0064, 0066, 0071, 0076,
0133
Radio Shack
Regal
0044, 0826
0049
Semp
0074
Runco
0029
Sharp
0077
Samsung
Scientific Atlanta
Signal
0173
Shintom
Shogun
Singer
0101
0037, 0046, 0506, 0906
0044
0269
0101
Starcom
Stargate
Starquest
Tocom
0032, 0044
0044, 0826
0044
Sony
0029, 0061, 0064
0029, 0064, 0072, 0110
0029
Sylvania
Symphonic
TMK
0041
0269
Toshiba
Tusa
0029
Teac
0029
0044
Technics
Teknika
Thomas
Toshiba
Totevision
Unitech
Vector
0064, 0191
0029, 0064, 0066
0029
United Artists
Viewstar
Zenith
0036
0056
0029, 0554, 0928
0072, 0074
0066, 0269
0269
0074
Video Concepts
Videosonic
Wards
0074
0269
0029, 0064, 0071, 0076, 0077,
0089, 0101, 0110, 0269
White Westinghouse
XR-1000
0238, 0307
0029, 0064, 0101
0029, 0068, 0238
Zenith
* Default code
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|