Installation and Assembly - Projector Adapter Plate for
Mitsubishi™ model Mitsubishi XL1U Projector
Models: PAP 113, PAP 113-S,
PAP 113-W
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
WARNING
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
Before you start check the parts list below to
make sure all of the parts shown are included.
Parts List
Description
PAP 113
Qty.
PAP 113-S PAP 113-W
BB
CC
EE
AA
AA adapter plate
055-1186
520-1079
560-9646
055-1212
520-1059
570-0008
1
3
055-4186 055-2186
510-2079 510-2079
560-9646 560-9646
055-4212 055-2212
520-2059 520-2059
570-0008 570-0008
BB M4 x .7 x 12 mm socket pin screw
CC 4 mm security wrench (for PAP only)
DD L bracket
1
2
2
2
EE M4 x .7 x 6 mm socket pin screw
FF adhesive foam pad
DD
FF
Note: Actual parts may appear slightly different than illustrated.
Adhere foam pads (FF) to L-brackets (DD).
*Notch indicates front of projector.
Secure projector by attaching two L-brackets to
adapter plate (AA) using two screws (EE).
Tighten all screws using 4 mm security allen
wrench (CC).
Turn projector upside down.Attach adapter plate
(AA) to projector using three screws (BB).
EE
BB
AA
AA
ADHERE PADS
TO L-BRACKETS
ISSUED:10-30-01 SHEET#: 055-9063-6 08-05-04
1 of 1
©2004PeerlessIndustries,Inc. Allrightsreserved.
For customer service call 1-800-729-0307 or 708-865-8870.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|