GE
3635
You are probably already
familiar with most of the keys
on the remote; however, there
may be a few which are new to
you.
try the next code in the list for
your brand of TV.
when you are in STB or DVD
modes. (However, the Volume
Keys will always control the
AUX device when in AUX
mode.) This is the way most
people will want the remote to
work. However, you can
change how the Volume Keys
work.
The original setting for the
Power key depends on which
remote you have. (Please
check the Play / Pause key on
your remote to see which
remote you have.)
SWITCHING MODES
THE POWER KEY
STEP 1 - INSTALL
BATTERIES
VERIZON FIOS TV
REMOTE CONTROL
STEP 3 - PROGRAM
YOUR REMOTE
Harman/Kardon
0137, 0216, 0918, 1331, 1333,
3626, 3636, 3699
Press a Device Key on top of
the remote to switch modes.
For example, to control your
DVD player, press DVD. To
return to your FiOS TV STB
box, press STB. Pressing the
TV, DVD or AUX key is like
picking up the remote for that
device.
When you are in STB mode,
the Power key can be
programmed to turn on/off just
the STB or the STB together
with other devices.
Hitachi
Integra
JBL
1828
To program the remote to
control a VCR or DVD player,
press and hold the DVD key,
instead of the TV key, in step 4
and 5. To program an audio
receiver, press and hold AUX
instead.
Note: You can assign a DVD or
VCR to the DVD key. The AUX
key is reserved for audio
receivers, amplifiers and VCR.
0162, 1325, 1347
0137, 1333, 3626, 3752
Install two new AA batteries.
Make sure they are oriented
correctly. To test if the
batteries have been installed
correctly, press a few keys on
the remote. One of the Device
Keys [DVD, AUX, TV, STB] on
the top of the remote will flash
briefly when you press a key.
Your new remote control
comes from the factory ready
to control your FiOS TV
JVC
1401, 1522, 3618, 3659, 3668,
3686, 3695, 3706, 3712, 3713,
3715, 3729, 3737, 3738
• Options displays extra
options or provides help
based on what you are
doing.
service. However, VOL+, VOL-
and MUTE will not work until
you program the remote with
the brand of TV you have. In
addition to your STB and TV,
your remote can also control
two additional devices, for
example, a DVD player and an
audio receiver.
This is called “programming
the remote.” If you don’t want
to control devices other than
your FiOS TV STB, you do not
need to program the remote.
Kenwood
1340, 1596, 1597, 3619, 3646,
3649, 3656, 3658, 3675, 3688
The Power key
controls only the
selected mode.
If you want the Power Key to control
multiple devices with a single power
key press…
KLH
1417, 1455
1393, 3749
3758
If you always want the Volume Keys
to control the AUX device …
Koss
• Favorites displays your list
of favorite channels. (The
first time you press the key,
you will be invited to set up
your favorite channels.)
Lexicon
LG
1. Press and hold the STB
key.
2. While holding down the
STB key, press OK.
3. Release both keys. The
Device Keys will blink twice.
4. Press 9 - 7 - 7. The STB
key will blink twice.
5. One after the other, press
each Device Key you want
the Power Key to control in
the order you want them to
turn on or off.
1320
Note: When you press Guide,
Widgets, On Demand,
Favorites, FiOS TV, or DVR
the remote assumes you want
to control the STB and will
automatically switch you to
STB mode.
Some people may want to
always adjust the volume using
their AUX device (typically a
home theater receiver)
regardless of the mode they
are in.
Linn
0216, 3636
The Power key
controls both STB and
TV in STB mode.
Magnavox
0216, 0558, 1216, 1296, 1541,
3636
STEP 2 - GET TO KNOW
YOUR REMOTE
Note: The remote will exit
programming mode after 20
seconds if no key is pressed.
Marantz
0216, 1216, 1296, 1316, 3636,
3727
• On Demand displays a list
of movies and other types
of programs you can watch
at any time.
McIntosh
3759
Your remote is now ready to
control your FiOS TV Set Top
Box (STB). To start, try the
following.
Mitsubishi
1420, 3708
WHAT IF NONE OF THE
CODES WORKED?
Codes for Audio Amplifiers
1. Press and hold the STB
key.
2. While holding down the
STB key, press OK.
3. Release both keys. The
Device Keys will blink twice.
4. Press 9 - 5 - 5. The STB
key will blink twice.
5. Press AUX. The AUX key
will blink 3 times to indicate
success in programming.
NAD
3637
BOSE
0701
Nakamichi
Onkyo
3638, 3639
• Press Widgets to access
local weather, traffic and
other information.
OPTIONAL: Reprogram
How the Channel,
Volume and Power
Keys Operate
Curtis Mathes
Denon
0327
0162, 0869, 1325, 1347, 1558,
3628, 3650, 3653, 3660, 3666,
3669, 3687, 3693, 3697, 3705,
3707, 3710, 3711, 3719, 3753
3777
Make sure the remote has a
clear, direct and unobstructed
view of any device you want to
control.
HOW TO PROGRAM YOUR
REMOTE
If none of the codes worked,
try the following procedure. (As
before, we will use the
example of a TV. For other
devices use the appropriate
Device Key instead of the TV
key in step 2 and 3.)
GE
0105
Harman/Kardon
JBL
0919
6. Press OK when done. The
STB key will blink 3 times to
indicate success in
Optimus
Oritron
0558, 0697, 1050, 1101, 3634
1393
3781
If you have a STB with a built
in DVR…
JVC
0358
We will use the example of
programming your remote to
control a TV. The procedure is
the same for DVD players and
audio receivers.
Panasonic
1315, 1335, 1343, 1545, 1575,
1660, 1790, 1791, 3629, 3630,
3667, 3683, 3701, 3723, 3728,
3731, 3732, 3733, 3734, 3736,
3742, 3743, 3745, 3746, 3747,
3750
Left Coast
Lexicon
Marantz
McIntosh
Optimus
Parasound
Philips
0919
THE CHANNEL KEYS
3784
• Turn on your TV.
programming.
0919, 3778
•
•
displays your list of
recorded programs.
• Press the STB key on the
top of the remote to make
sure you are in FiOS TV
“STB Mode.”
CH+, CH- and Last control the
Set Top Box (STB) even after
you press the TV, DVD or AUX
Device Key. This is the way
most people will want the
remote to work. However, you
can change the way the
Channel Keys work so that
when you press a Device Key,
the Channel Keys will operate
the selected device.
3785
For example, to program the
Power Key to turn on or off
your TV, AUX and STB, in that
order, with one press of
Power, press [STB+OK],
[9-7-7], [TV], [AUX], [STB],
[OK].
0327
1. Turn on your TV.
Philips
0216, 1216, 1293, 1296, 3636,
3698, 3749
3782
2. Press and hold the TV key.
3. While holding down the TV
key, press OK.
4. Release both keys. The
Device Keys will blink twice.
5. Press 9 - 2 - 2.
Note: To return to controlling
the volume via the TV, press
TV in step 5. If you want to
control the volume through any
device (by pressing a Device
Key, then a Volume Key),
press OK in step 5. This will
also control the volume of your
STB in STB mode.
1. Look up your TV make in
the TV code listing on the
other side of this sheet.
2. Circle the first 4-digit
number displayed for your
make of TV.
0919
is a rocker button,
Pioneer
0041, 0177, 0558, 0657, 1050,
1411, 3607, 3608, 3625, 3644,
3645, 3652, 3654, 3677, 3678,
3679, 3689, 3690, 3722, 3740
Pioneer
Polk Audio
RCA
0040, 0327, 3775
• Press the CH+ key to see
0919
press the lower half of the
the next higher channel.
0327
Polaroid
Polk Audio
Proscan
RCA
3605
Sony
0716
button
program. Press upper half
of the button to
to pause the
• Press 5 - 0 then OK to tune
0216, 1316, 3726
1281, 3635
Soundesign
Soundmatters
Victor
0105
to channel 50.
3783
6. Point the remote at the TV.
If you find that your devices do
not always turn on or off
together as expected, then you
should program your remote to
control only one device at a
time.
3. Turn on your TV.
• Press Last to return to the
0558, 1050, 1101, 1281, 1417,
1538, 3609, 3620, 3635, 3748
0358
4. Press and hold the TV key.
5. While holding down the TV
key, press the OK key.
6. Release both keys. The
Device Keys will blink twice.
7. Enter the 4-digit TV code
you circled. The TV key will
blink 3 times.
8. To test to see if this was the
correct code, point the
remote at your TV and
press Power. If the TV
turns off, you have
successfully programmed
your remote.
9. If the TV did not turn off,
repeat all the steps with the
next code in the list.
10.For future reference,
underline the code that
worked for you.
last channel.
Wards
0040, 0105
7. Press
8. Press
press
.
continue to play from where
you left off.
Rotel
3760
Yamaha
0160, 0381, 3776, 3779, 3780
• Press Info to see
. Every time you
the remote
RCA & Dimensia
Rio
3610, 3611, 3612, 3613, 3635
1896
If you want the Channel Keys to
control different devices …
information about the
RE-SETTING THE REMOTE
•
jumps back a few
seconds in the program you
are watching.
Codes for Audio Receivers
current program. Press Exit
to return to TV watching.
Samsung
Sansui
1322, 1527, 3720, 3755
0216, 3636
sends out a new power-off
command to the TV. Keep
ADC
0558
3725
1. Press and hold the STB
key.
Adcom
Aiwa
Note: All previous programming
will be lost.
If you want the Power Key to control
only one device at a time…
Sanyo
1496, 1828
0148, 0216, 1415, 1432, 1668,
3614, 3615, 3616, 3617, 3627,
3636, 3670, 3680, 3718
• Press Guide to see a list of
TV programs. Press Exit to
return to TV watching.
pressing
until the TV
Sherwood
Sonic Blue
Sony
1104, 3632, 3724
1896
• If you are watching a
2. While holding down the
STB key, press the OK key.
3. Release both keys. The
Device Keys will blink twice.
4. Press 9 - 6 - 6. The STB
key will blink twice.
5. Press OK. The STB key will
blink 3 times to indicate
success in programming.
turns off. (You can press
recorded program,
jumps forward in the
program.
to go back.)
9. When the TV turns off, you
have found the right code.
Press OK to store this
code.
To power any device, you will
need to press the appropriate
Device Key, then the Power
Key.
1085, 1285, 1468, 1585, 1685,
1785, 1786, 1885, 3606, 3621,
3622, 3631, 3640, 3641, 3642,
3643, 3648, 3651, 3657, 3671,
3672, 3673, 3674, 3684, 3685,
3714, 3716, 3717, 3730, 3735,
3739, 3744
Alco
1417
To reset the remote to the
original setting, do the
following steps.
Amphion Media Works1590, 1642
• Press the Menu key to
launch the FiOS TV Main
Menu. From the Main Menu
you can access all the
features of your FiOS TV
service.
AMW
1590, 1642
Model: RC144 5302 / 00B
Anam
1101
Anthem
Apex Digital
Audiotronic
Audiovox
BOSE
3757
•
records the current
program.
For additional information
about your FiOS TV service
and your remote, go to
1. Press and hold the STB
key.
1457
1. Press and hold the STB
key.
2. While holding down the
STB key, press OK.
3. Release both keys. The
Device Keys will blink twice.
4. Press 9 - 7 - 7. The STB
key will blink twice.
5. Press OK. The STB key will
blink 3 times to indicate
success in programming.
Soundesign
Sunfire
0697
1216
Note: There are over 300 TV
and DVD codes. The most
common codes are tried first,
but you may still need to press
over 300 times to find the
right code. If you reach the end
of the list of codes the entire
remote will flash twice and
return to normal operation. You
can exit programming at any
time by pressing Exit.
1340
2. While holding down the
STB key, press OK.
3. Release both keys. The
Device Keys will blink twice.
4. Press 9 - 0 - 0. The STB
key will blink 3 times to
indicate success in
1417, 3754
Teac
1101, 1417
0666, 1256, 1280, 1960, 3741
• Press
,
, , and keys
Technics
1335, 1545, 3629, 3630, 3661,
3665, 3667
Capetronic
Carver
0558
Note: To return to controlling
the channel via the STB only,
press STB in step 5.
to navigate through this
For video instructions, press
the Menu key on your remote
then select Help on the Main
Menu
0216, 1216, 3636
3664
Thorens
Venturer
Wards
1216
menu. We suggest that you
become familiar with all the
options on the Main Menu.
To select any item, press
OK. Press Exit at any time
to return to TV watching.
Classic
1417
Coby
3751
0041, 0216, 3625, 3636
Denon
1387, 3602, 3633, 3662, 3663,
3676, 3681, 3682, 3691, 3694,
3700, 3702, 3703, 3704, 3709,
3721
Yamaha
0162, 0203, 1203, 1303, 1358,
1402, 3600, 3601, 3604, 3623,
3624, 3625, 3647, 3655, 3692,
3696, 3756
THE VOLUME KEYS
programming.
Note: If some of the keys on
the remote do not operate your
TV as you would expect, then
Verizon Customer Support
888-553-1555
VOL+, VOL- and Mute always
control the TV volume even
Emerson
Fisher
3603
1828
Zenith
1320
Download from Www.Somanuals.com. All Manuals Search And Download.
|