Color TV with built-in VCR
CCA092AT
O wner’s Manual
Im portant!
Return your W arranty Registration
Card within 10 days. See why inside.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction 3
W elcom e to your TV/VCR owner’s m anual.
This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;
Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions
explain all of the TV/VCR’s features, which are listed below.
Features
• A-B Repeat Play
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Operation Features
• Automatic Tracking Adjustment
• Blue Background
• Daylight-Savings Time
• Dew Sensor
• High Quality (HQ) System
• On-screen displays in English or Spanish
• On-screen Menu Programming, accessible with remote control
or front panel buttons
• One-Touch Recording
• Real-Time Counter
• Remote Control
• Repeat Play
• Sleep Timer
• SmartClockTM
• Special Effects Playback: Forward and Reverse Searching; Still
• Timer Recording
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equip-
ment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unautho-
rized changes or modifications to this equipment void the user’s
authority to operate it.
This TV/VCR, equipped with a High Quality (HQ) system, is compat-
ible with existing Video Home System (VHS) equipment.
Helpful Hints
Philips Consum er Electronics Com pany recommends that you
• Before doing anything else, record
use only video cassette tapes that are labeled with the
mark.
the TV/VCR’s model and serial num-
bers in the spaces provided on page
two. These numbers will help us
assist you if you ever call for help.
• Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that needs
to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of
as small chemical waste.
The use of other tapes may result in poor picture quality and exces-
sive deposits on the video heads, which may not be covered by the
warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is pro-
vided to call the Cable TV system installer’s attention to Article 820-
40 of the National Electrical Code, which provides guidelines for
proper grounding – in particular, specifying that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as possible.
As an ENERGY STAR® Partner, Philips Consumer Electronics
Company has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency. ENERGY
STAR® is a U.S. registered mark.
Using products with the ENERGY STAR® label can save energy. Saving
energy reduces air pollution and lowers utility bills.
SmartClockTM is a trademark of Philips Consumer Electronics
Company.
Please find out about the local regu-
lations on disposal of your old prod-
uct, batteries, manual, and packag-
ing whenever you replace existing
equipment.
Copyright 1999 Philips Consumer Electronics Company. All rights
reserved.
This owner’s manual is made of recycled paper.
m
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-18
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-24
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
Basic O perations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording O ptions
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing O ptions
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Additional Features
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Inform ation You May Need
Specifications/Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-49
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the TV/VCR 5
Putting Batteries in the Rem ote Control
1
Rem ove the battery com partm ent lid on the bottom of
the rem ote control by sliding the lid in the direction of
the arrow.
1
2
3
2
Place two AA batteries inside the battery com partm ent
with their and ends aligned as indicated.
+
–
3
Replace the battery com partm ent lid.
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings
are not erased accidentally.
1
1
2
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Rem ote Control
● Point the remote control at the TV/VCR’s remote sensor.
● Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
● In this TV/VCR, use only tapes with the
mark.
● Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
● Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually
require cleaning or replacement. Only an authorized service cen-
ter should perform this service.
Helpful Hints
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Hooking Up the TV/VCR
1
Hook up your TV/VCR using one of the connections shown.
A.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
Hooking Up Your TV/VCR W ith a
Cable Signal or O utdoor Antenna
DC 13.2V
AC 120V
ANT.
ANT
B.
Connect the Cable signal to
the IN Jack on the Cable Box.
Hooking Up Your TV/VCR
W ith a Cable Box
To view any channel, set the TV/VCR to the
Cable Box output channel (channel 03 or 04).
Then, select channels at the Cable Box.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.
IN
OUT
DC 13.2V
AC 120V
ANT.
ANT
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the TV/VCR (cont’d) 7
C.
Rod Antenna (supplied)
Hooking Up Your TV/VCR W ith an
Indoor Antenna
To install a rod antenna (supplied), push the
stem of the antenna into the antenna hole on
the back of the TV/VCR. Connect the anten-
na wire to the ANT(enna) Jack on the back
of the TV/VCR as shown. Extend the antenna
and adjust its length, direction, and angle for
the clearest picture.
DC 13.2V
AC 120V
ANT.
ANT
2
DC 13.2V
AC 120V
Connect the AC cord to the AC
120V jack on the back of the
TV/VCR. Plug the AC cord into
an AC power outlet.
ANT
3
Before you turn on the TV/VCR,
go to page nine.
Helpful Hint
• Before connecting an antenna or cable signal to the
ANT(enna) Jack, make sure the pin is not bent. If the
pin is bent, straighten it as illustrated, then connect
the antenna or cable signal to the ANT(enna) Jack.
Bent pin
Crooked Pin
Plug
Cable
Straight Pin
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Hooking Up the TV/VCR (cont’d)
Mobile Connections
Usually, the supplied indoor rod antenna pro-
vides adequate reception. But when you
want to watch TV outdoors or in a vehicle,
use a mobile antenna (not supplied) or an
indoor dipole antenna (not supplied) and a
car battery cord (supplied) to get good
reception.
Mobile Antenna
(not supplied)
1
Connect an antenna to the ANT(enna)
jack. Refer to the instructions with your
mobile antenna to make a connection similar
to this one.
DC 13.2V
A
C
1
2
0
V
ANT.
ANT
2
Make sure your vehicle has a 13.2-volt,
negative ground electrical system .
Connect one end of the car battery
cord to the DC 13.2V jack on the back
of the TV/VCR. Then connect the
other end of the car battery cord to the
cigarette lighter in your vehicle.
DC 13.2V
AC 120V
DC 13.2V
AC 120V
ANT
car battery cord
(supplied)
To Cigarette Lighter
Helpful Hints
• Do not watch TV while driving.
• Use only the supplied car battery cord. Using another
cord could damage the TV/VCR.
• Make sure the cigarette lighter jack is free of ashes and
other debris.
• Make sure you push the car battery cord’s plug com-
pletely into the cigarette lighter.
• Always unplug the car battery cord from the cigarette
lighter before you unplug it from the TV/VCR.
• You must disconnect the car battery cord from the
TV/VCR before you can use standard electrical (AC)
power.
• If you use the TV/VCR with the vehicle’s engine off,
recharge the vehicle’s battery every four hours. Unplug
the car battery cord from the cigarette lighter when you
finish using the TV/VCR.
• When you use the TV/VCR with a car battery cord,
noise may appear on the TV/VCR screen.
• Do not use this TV/VCR in high temperature conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On the TV/VCR 9
Before you turn on the TV/VCR, make sure batteries are in the
remote control and the TV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
POWER
SLEEP
1
2
3
1
PLAY
REW
F.FWD
Press the PO W ER button. The TV/VCR will come on and the
screen shown below will appear.
4
STOP
STATUS/EXIT
SELECT LANGUAGE
> ENGLISH
ON
1
4
7
2
3
6
9
CH.
ESPAÑOL
5
8
SELECT KL OR
PRESS MENU TO CONTINUE
VOL
.
ALT. CH
0
5
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
2
Press the PLAY/K button or the STO P/L button to select
English or Spanish on-screen displays and m enus.
3
Press the MENU button. The screen shown below will appear.
CONNECT ANTENNA OR CABLE
TO TVCR
THEN PRESS
B
TO END PRESS EXIT
Helpful Hints
4
• If you do not see any on-screen dis-
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
10-11 to select a language and set
up channels.
• To skip step 2, press the MENU
button. All on-screen displays will be
in English. To skip step 4, press the
STATUS/EXIT button. Channels will
not be set up, and CHANNELS
NOT SET will appear on the screen
briefly.
Press the F.FW D/B button to begin autom atic channel
setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on the screen
briefly. Then the TV/VCR will go to the lowest channel pro-
grammed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on the
screen. Connect an antenna or cable to the ANT(enna) jack on
the TV/VCR, then press the F.FWD/B button again. You may
need to follow the steps on page 11 instead.)
5
• You cannot set up channels if you
are using a Cable Box.
Use the CH(annel) m/n button or the Num ber buttons
on the rem ote control to select a TV/VCR channel. Use
the VO L(um e) m/n button to adjust the sound.
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. When you select chan-
nel 00, A/V IN will appear on the
screen briefly. Press the CH(annel)
m/n button or the Number but-
tons to select another channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Language Selection
Follow the steps below to change the language of the on-screen
displays and menus.
2-4
POWER
SLEEP
1
Press the MENU button.
PLAY
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
REW
F.FWD
STOP
STATUS/EXIT
1
1
4
7
2
3
6
9
5
CH.
5
8
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
PRIMARY SETUP
REC/OTR
TRACKING
MUTE
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to
choose SELECT LANGUAGE. Then, press the F.FW D/B
button.
SELECT LANGUAGE
> ENGLISH
ESPAÑOL
ON
SELECT KL
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
ENGLISH or ESPAÑO L (Spanish).
Helpful Hint
• If you accidentally select Spanish
and need English on-screen displays
and menus:
1) Press the MENU button.
2) Press the PLAY/o button or the
STOP/p button to select PREPARA-
CION, then press the F.FWD/B
button.
5
Press the STATUS/EXIT button.
3) Press the PLAY/o button or the
STOP/p button to select SELEC-
CION IDIOMA, then press the
F.FWD/B button.
4) Press the PLAY/o button or the
STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Channel Setup 11
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
2-3
1
Press the MENU button.
POWER
SLEEP
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
1
4
7
2
3
6
9
2
CH.
5
8
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP, then press the F.FW D/B button.
VOL
.
ALT. CH
0
PRIMARY SETUP
SPEED
MEMORY PAUSE/STILL
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
REC/OTR
TRACKING
MUTE
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
AUTO PRO GRAMMING, then press the F.FW D/B but-
ton. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable chan-
nels automatically, and the TV/VCR will memorize its available
Wait for the TV/VCR to set up
channels.
4
4
W ait for a few m inutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR’s memory will
appear on the screen. Now, when you press the CH(annel) m/n
button, you will scan only through channels you receive.
Helpful Hints
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Automatic Channel Setup (cont’d)
Adding/Deleting Channels
2,4
1
Press the MENU button.
TO ADJUST PRESS { /
B
POWER
SLEEP
CH123
SAVED
>
CHANNEL
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
5
3
1
Press the PLAY/o button or the STO P/p button to select
CHANNEL.
1
4
7
2
3
6
9
CH.
5
8
TO ADJUST PRESS { /
B
CH123
VOL
.
ALT. CH
SAVED
0
>
CHANNEL
EXIT
SPEED
MEMORY PAUSE/STILL
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
REC/OTR
TRACKING
MUTE
3
Press the CH(annel) m/n button to select the channel
you want to add or delete.
TO ADJUST PRESS { /
B
CH23
SAVED
>
CHANNEL
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
Helpful Hint
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the MENU button.
4
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/{ button to see the
previous screen of channels.
Press the F.FW D/B button or the REW (ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
5) Press the STATUS/EXIT button
once or twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock 13
There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station.
If you use either Manual PBS Channel Selection or Automatic PBS
Channel Selection, follow the steps on page 20 to have the
TV/VCR maintain the clock according to your Time Zone.
Cable Box users m ust set the clock m anually.
To set the clock manually, follow the steps on pages 13-14. To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 15-16. To set the clock using Manual PBS Channel
Selection, follow the steps on pages 17-18.
2-3
POWER
SLEEP
PLAY
REW
F.FWD
STOP
Before you begin, make sure:
● The TV/VCR is hooked up and turned on.
STATUS/EXIT
● Channels are set up.
● You make each entry within 60 seconds of the previous entry.
1
1
4
7
2
3
6
9
CH.
5
8
Manual Clock Setting
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
1
Press the MENU button.
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS
B
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
Helpful Hints
• Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.
• To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num-
ber you want to correct is flashing.
Then enter the correct number.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
Instructions continue on page 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Setting the Clock (cont’d)
4
Press the PLAY/o button or the STOP/p button to select
SET MANUAL CLOCK, then press the F.FW D/B button.
SET MANUAL CLOCK
POWER
SLEEP
TIME – – : – –
DATE – – / – – / – –
4
PLAY
REW
F.FWD
TO END PRESS EXIT
STOP
STATUS/EXIT
7
5
1
4
7
2
3
6
9
CH.
Press two Num ber buttons for the hour(s) and two
Num ber buttons for the m inute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
5
8
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
SET MANUAL CLOCK
TIME
09 : 30 PM
REC/OTR
TRACKING
MUTE
MONTH
– – / – – / – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the m onth, two Num ber
buttons for the day, and two Num ber buttons for the
year. For example, for July 1, 1999, press 07, 01, 99. The day of
the week will appear automatically.
5-6
SET MANUAL CLOCK
TIME
09 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
Helpful Hint
• This VCR is ready for the year 2000
and the years beyond. To set a date in
the year 2000, enter 00 for the year
in step 6.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 15
Autom atic PBS Channel Selection
1
Press the MENU button.
2-3
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
PRESS
B
POWER
SLEEP
BRIGHTNESS
PICTURE
PLAY
REW
F.FWD
STOP
4
2
STATUS/EXIT
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
1
1
4
7
2
3
6
9
CH.
PRIMARY SETUP
5
8
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
VOL
.
ALT. CH
[ON]
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button. If O FF appears beside AUTO CLO CK, press the
F.FW D/B button so that O N appears to the right of
AUTO CLO CK, then press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Instructions continue on page 16.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Setting the Clock (cont’d)
Wait for the TV/VCR to find
the time.
5
6
7
Press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. AUTO . Then, press the F.FW D/B
button.
SET AUTO CLOCK
POWER
SLEEP
TIME
– – : – –
DATE
– – / – – / – –
NOW SEARCHING
TO END PRESS EXIT
PLAY
REW
F.FWD
STOP
STATUS/EXIT
5
6
NOW SEARCHING flashes on the TV/VCR screen.
1
4
7
2
3
6
9
CH.
However, you may see the message: “PLEASE TURN OFF TO
SET AUTO CLOCK. PLEASE WAIT SEVERAL MINUTES.”
If this message appears, turn off the TV/VCR for several minutes.
When you turn on the TV/VCR, the time will be set. If the time is
not set, repeat steps 1-5. Or, follow the steps on pages 13-14 to
set the clock manually or pages 17-18 to set the clock with
Manual PBS Channel Selection.
5
8
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
7
W hen the TV/VCR finds the PBS channel, the tim e will
appear on the screen. Press the STATUS/EXIT button.
SET AUTO CLOCK
TIME
06 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO END PRESS EXIT
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen, you will be prom pted to turn off the
TV/VCR. Turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the clock will be
set.
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – –
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
Helpful Hints
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 25.
• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
• Automatic clock setting is not possi-
ble with a mobile connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 17
Manual PBS Channel Selection
2-3
1
Press the MENU button.
POWER
SLEEP
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS
B
PLAY
REW
F.FWD
4
STOP
STATUS/EXIT
1
2
1
4
7
2
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
CH.
5
8
PRIMARY SETUP
VOL
.
ALT. CH
0
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button. If O FF appears beside AUTO CLO CK, press the
F.FW D/B button so that O N appears to the right of
AUTO CLO CK, then press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Instructions continue on page 18.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Setting the Clock (cont’d)
5
Press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. MANUAL. Then, press the F.FW D/B
button. The default channel (02) flashes.
Wait for the TV/VCR to
find the time.
7
AUTO CLOCK (PBS) CH 02
POWER
SLEEP
TIME
– – : – –
DATE
– – / – – / – –
SELECT CHANNEL NUMBER
TO END PRESS EXIT
PLAY
REW
F.FWD
STOP
STATUS/EXIT
5
6
8
6
Use the Num ber buttons to select your PBS station.
1
4
7
2
3
6
9
CH.
AUTO CLOCK (PBS) CH 12
5
8
TIME
– – : – –
DATE
– – / – – / – –
VOL
.
ALT. CH
0
NOW SEARCHING
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
TO END PRESS EXIT
7
NOW SEARCHING flashes on the TV/VCR screen.
8
W hen the TV/VCR finds the clock data, the tim e will
appear on the screen. Press the STATUS/EXIT button.
AUTO CLOCK (PBS) CH 12
TIME
06 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO END PRESS EXIT
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/▲ button or the STO P/▼ button to
choose SELECT NEW PBS CH. Then, press the
F.FW D/B button. Repeat step 6.
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. AUTO. Then, press the F.FW D/B
button. The TV/VCR will search for the PBS channel automati-
cally.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on the TV/VCR again, the time will be set.
Helpful Hints
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page 12.
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 25.
Download from Www.Somanuals.com. All Manuals Search And Download.
Daylight-Savings Time 19
When the Daylight-Savings Time feature is ON, the TV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Savings Time ON or OFF, follow the steps
below.
2-4
POWER
SLEEP
1
Press the MENU button.
PLAY
REW
F.FWD
STOP
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS
B
STATUS/EXIT
1
1
4
7
2
3
6
9
5
CH.
5
8
VOL
.
ALT. CH
0
2
SPEED
MEMORY PAUSE/STILL
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
REC/OTR
TRACKING
MUTE
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
DAYLIGHT SVG.TIME. Then, press the F.FW D/B button
so that O N or O FF appears beside DAYLIGHT SVG.
TIME (Daylight Savings Tim e).
5
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Time Zone
When you set the clock using AUTO CLOCK, specify your time zone.
The TV/VCR will maintain the clock according to your time zone.
1
Press the MENU button.
2-5
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
PRESS
B
POWER
SLEEP
BRIGHTNESS
PICTURE
6
1
PLAY
REW
F.FWD
2
STOP
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
STATUS/EXIT
1
4
7
2
3
6
9
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
CH.
5
8
[ON]
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
SELECT KL CHOOSE
B
TO END PRESS EXIT
REC/OTR
TRACKING
MUTE
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
SET TIME ZO NE. Then, press the F.FW D/B button.
SET TIME ZONE
> AUTO
ATLANTIC
[ON]
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
SELECT KL
TO CONTINUE PRESS MENU
Helpful Hints
• If you select AUTO at step 5, the
TV/VCR will set the clock according
to the time zone data of the PBS
station it finds.
5
Press the PLAY/▲ button or the STO P/▼ button to select
your tim e zone.
• You cannot select SET TIME ZONE
at step 4 if AUTO CLOCK is set to
OFF.
6
Press the MENU button, then press the STATUS/EXIT
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel 21
Cassette Com partm ent
Insert a video cassette tape here.
W ireless Rem ote Sensor
Receives a signal from your remote control so
you can operate the TV/VCR from a distance.
REC(ord) Light
This light appears during a recording. It flashes
slowly when the TV/VCR power is turned off
to set a timer recording. It blinks rapidly when
a recording is paused or when the power is off
for a timer recording, but there is no tape in
the TV/VCR.
VIDEO Jack
Connect this jack to the video out jack of a
camcorder or a VCR. Details are on page 31.
AUDIO Jack
Connect this jack to the audio out jack of a
camcorder or a VCR. Details are on page 31.
STOP
EJECT REW
POWER
REC/OTR
PLAY
F.FWD
VOLUME
CHANNEL
AUDIO
VIDEO
EARPHONE
PO W ER Button
REC
Press to turn the power on or off.
STO P/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the menu.
CHANNEL o/p
Buttons
Press to scan through the
TV/VCR channels.
REW (ind) Button
During tape playback,
press to adjust the track-
ing. Details are on page 46.
Press the CHANNEL o
button and the VOLUME
p button on the TV/VCR
at the sam e tim e to
display the pop up menu.
Press again to remove the
pop up menu.
When tape playback is stopped, press to
rewind the tape at high speed. During play-
back, press to rewind the tape while the pic-
ture stays on the screen. Press to change a set-
ting of a pop up menu item (for example, to
adjust the BRIGHTNESS) or to return to a
previous menu.
PLAY Button
Press to play a tape. Details are on page 28.
Press to release Search or Still mode and
return to normal playback. Details are on page
41. Press to select an item in the menu.
VOLUME o/p
Buttons
Press to adjust the sound
level.
Press the CHANNEL o
button and the VOLUME
p button on the TV/VCR
at the sam e tim e to
display the pop up menu.
Press again to remove the
pop up menu.
F.FW D Button
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on the screen. Press to change a
setting of a menu item (for example, to adjust
the BRIGHTNESS) or to advance to the next
menu.
REC(ord)/O TR Button
Press once to start a recording. Details are on
page 29. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 30.
EARPHO NE Jack
Connect earphones (not supplied)
here for personal listening.
Screen Cover
The TV/VCR screen is protected by a removable screen
cover. If you want to remove the screen cover, slide the two
tabs that hold the cover in place, then pull off the cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Rear Panel
DC 13.2V
AC 120V
ANT
ANT(enna) Jack
Connect your antenna or cable here.
Details are on pages six-eight.
AC 120V Jack
Connect the AC cord here. Details are
on page seven.
DC 13.2V Jack
Connect the car battery cord here.
Details are on page eight.
Antenna Hole
Connect the stem of an indoor rod
antenna here. Details are on page seven.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Buttons 23
F.FW D/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 41.
Press to change the setting of an item in the menu or press to
proceed to the next menu.
SLEEP Button
Press to set the sleep timer. Details are on page 43.
POWER
SLEEP
PO W ER Button
Press to turn on or off the TV/VCR.
PLAY/▲ Button
Press to play a tape. Details are on page 28. Press to release Search
or Still mode and return to normal playback. Details are on page
41. Press to select an item in the on-screen menu.
PLAY
REW
F.FWD
STOP
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.
STATUS/EXIT
1
4
7
2
3
6
9
Num ber Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
CH.
5
8
● Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
● Antenna Users
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
Enter channel numbers as a two-digit number for the quickest results. If
you only press the Number 5 button, channel 5 will be selected after a
brief delay. You may only select channels 2-69. For example, to select
channel 5, press 0,5.
SPEED Button
Press to select the recording speed (SP or SLP).
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
VO L(um e) m/n Button
Press to adjust the sound level. If you press the VOL(ume) m/n
button when the sound is muted, the sound will be restored.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Remote Control Buttons (cont’d)
STO P/▼ Button
Press to stop the tape. Press to select an item in the on-screen
menu.
REW (ind)/{ Button
POWER
SLEEP
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
picture stays on the screen. Details are on page 41.
Press to change a setting of a menu item or to return to a previ-
ous menu.
PLAY
STATUS/EXIT Button
REW
F.FWD
Press to see the status display. Press again to remove the status
display. Details are on page 25. Press to exit the on-screen menu.
STOP
STATUS/EXIT
MENU Button
Press to display the pop up menu. You also may use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 21.
1
4
7
2
3
6
9
CH.
5
8
CH(annel) m/n Button
Press to scan through the TV/VCR’s channels.
VOL.
ALT. CH
MEMO RY Button
0
SPEED
MEMORY PAUSE/STILL
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 40. Or, press to memorize
the start and end positions on a tape when setting up A-B Repeat
Play. Details are on pages 38-39.
REC/OTR
TRACKING
MUTE
REC(ord)/O TR Button
Press once to start a recording. Details are on page 29. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 30.
TRACKING m/n Buttons
Press during tape playback to adjust the tracking. Details are on
page 46.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press
again to resume recording. Details are on page 29. You cannot
pause a One-Touch Recording.
During tape playback, press to freeze the picture (still). Each time
you press the PAUSE/STILL button, the noise lines will change
position on the screen. Details are on page 41.
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Status Displays 25
A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status
display will vary. To choose the status display mode, follow the
steps below.
If you select STATUS O N, then select CO UNTER O NLY
O FF:
● Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func-
tion buttons.
If you select STATUS O N, then select CO UNTER O NLY
O N:
Current
Tape
Channel
Time
Function
12:00 AM
CH10
STOP
● Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS O FF:
● The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
SLP
M 1:23:45
Counter
and
Counter
Memory
Tape
Speed
1
Press the MENU button.
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
3
Press the PLAY/▲ button or the STO P/▼ button to select
O N-SCREEN MO DE, then press the F.FW D/B button.
4
Press the PLAY/o button or the STO P/p button to select
STATUS, then press the F.FW D/B button so that O N or
O FF appears beside STATUS.
ON-SCREEN MODE
> STATUS
[ON]
[OFF]
COUNTER ONLY
SELECT KL CHOOSE
B
TO END PRESS EXIT
5
If you set STATUS to O FF, go to step 6. If you set STA-
TUS to O N, press the PLAY/o button or the STO P/p
button to select CO UNTER O NLY, then press the
F.FW D/B button so that O N or O FF appears beside it.
Helpful Hint
• The status display will not appear
when you press the STATUS/EXIT
button during a One-Touch
Recording.
6
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, picture,
color, tint, and sharpness.
1
POWER
SLEEP
Press the MENU button.
TO ADJUST PRESS { /
B
>
BRIGHTNESS
PICTURE
COLOR
PLAY
REW
F.FWD
TINT
STOP
3
SHARPNESS
TV RESET
2
STATUS/EXIT
1
1
4
7
2
3
6
9
4
CH.
5
8
2
Press the PLAY/▲ button or the STO P/▼ button to select
the desired control (BRIGHTNESS, for exam ple).
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
3
Press the REW (ind)/{ button or the F.FW D/B button to
adjust the picture control. (Refer to the chart on page 27.)
4
W hen you finish, press the STATUS/EXIT button.
Helpful Hints
• The on-screen menus shown on
page 27 will disappear if no adjust-
ments are made within 60 seconds.
• The original settings will probably
give you the best picture quality.
• To reset the picture controls to the
original settings, press the MENU
button, then press the PLAY/▲ but-
ton or the STOP/▼ button to select
TV RESET, then press the
F.FWD/B button. TV RESET COM-
PLETED will appear on the screen
briefly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Controls (cont’d) 27
Decrease
decreased brightness
decreased contrast
paler
Increase
increased brightness
increased contrast
more brilliant
more green
BRIGHTNESS
PICTURE
CO LO R
TINT
SHARPNESS
more purple
softer
clearer
Press the REW(ind)/{
button to decrease a
picture control. Press
the F.FWD/B button
to increase a picture
control.
STOP
EJEC
POWER
REC/OTR
VOLUME
CHANNEL
AUDIO
VIDEO
EARPHONE
REC
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
BRIGHTNESS
PICTURE
COLOR
>
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
TINT
SHARPNESS
TV RESET
TO ADJUST PRESS{ /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
>
Press the STOP/▼
button
Press the PLAY/▲
button
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Playing
Follow the steps below to play a tape.
Insert a tape in the TV/VCR.
1
5
1
Press the STOP/EJECT button
on the TV/VCR.
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab has been removed, playback should start auto-
matically.
POWER
SLEEP
2
If playback does not start autom atically, press the
PLAY/▲ button to start playback.
PLAY
REW
F.FWD
2
4
STOP
STATUS/EXIT
3
3
1
4
7
2
3
6
9
Press the STO P/▼ button to stop playback.
CH.
5
8
4
VOL
.
ALT. CH
0
Press the REW (ind)/{ button to rewind the tape.
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
5
W hen the tape has finished rewinding, press the
STO P/EJECT button on the TV/VCR to rem ove the tape.
Helpful Hints
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
PLAY/▲ button.
• Playback features and options are
on pages 37-41.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording 29
Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in
the TV/VCR. The power will come on. O r, if the tape is
already in the TV/VCR, press the PO W ER button to turn
on the TV/VCR, if necessary.
POWER
SLEEP
1
6
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. Details about tape speed are
given below.
PLAY
F.FWD
STOP
REW
STATUS/EXIT
3
1
4
7
2
5
8
3
6
9
3
5
CH.
Use the CH(annel) m/n button or the Num ber buttons to
select the channel to be recorded. (Channels cannot be
changed during recording.)
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
4
2
4
Press the REC(ord)/O TR button once to start recording.
The REC(ord) light will glow.
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
● If the tape does not have a record tab, PROTECTED CAS-
SETTE CANNOT RECORD flashes on the screen briefly. The
TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for exam ple, during com m er-
cials), press the PAUSE/STILL button. The REC(ord) light
will flash. To resum e recording, press the PAUSE/STILL
button again or the REC(ord)/O TR button. The REC(ord)
light will glow.
Helpful Hints
• You cannot record one channel
while watching another.
• Recording options are on pages
30-36.
6
To stop recording, press the STO P/▼ button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. During playback, the VCR selects the tape
speed automatically. When recording, you can change the tape
speed using the SPEED button. You cannot record in LP speed.
• You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on the screen.)
Details are on page 36.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Cassette type / Playback Time
Tape Speed
SP(Standard Play)
T160
2 hrs.
40 mins.
5 hrs.
T120
T60
2 hrs.
1 hr.
LP(Long Play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
SLP(Super Long Play)
8 hrs.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours
long without setting the timer.
Before you begin, make sure:
● Channels are set up.
Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
4
● There is a tape in the TV/VCR. The record tab must be intact.
POWER
SLEEP
1
Use the CH(annel) m/n button or the Num ber buttons to
select the channel you want to record.
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 29.
1
4
7
2
3
6
9
CH.
5
8
1
3
VOL
.
ALT. CH
0
Press the REC(ord)/O TR button repeatedly until the
desired recording length appears in the upper right corner of the
screen. Recording will begin immediately. The REC(ord) light will
appear.
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
2
3
OTR
CH12
LENGTH 0:30
LENGTH
CANCEL
:
:
PRESS OTR
PRESS CLEAR
4
To stop an O TR before recording is finished, press the
STO P/EJECT button on the TV/VCR.
O r, press the REC(ord)/O TR button, then press the
CLEAR button, then press the STO P/▼ button on the
rem ote control.
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears on
the screen.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rerecording (Tape Duplication) 31
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
STOP
EJECT
VIDEO AUDIO
OUT
POWER
VIDEO
AUDIO
REC
IN
Audio Cable (white) from
AUDIO OUT to AUDIO
AUDIO and VIDEO
Jacks on TV/VCR
Video Cable (yellow) from
VIDEO OUT to VIDEO
1
Make the connections shown above, using audio and video
cables. (Make sure the source unit (VCR or cam corder) is
connected to a power source.)
2
The source unit will play your tape. Insert a prerecorded tape
in the source unit. If playback begins, press the STOP button on
the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR rem ote control at the TV/VCR. Press
Num ber buttons 0, 0 so that A/V IN appears on the screen.
5
Point the TV/VCR rem ote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP or
SLP) appears on the screen.
Helpful Hints
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment may
operate differently.
6
Press the PLAY button on the source unit and the
REC(ord)/O TR button on your TV/VCR at the sam e tim e.
Copying will begin.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Audio and video cables are not
included.
7
To stop copying, press the STO P/EJECT button on the
TV/VCR, then stop the tape on the source unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
● The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu.
2-3
POWER
SLEEP
● Channels are set up.
● There is a tape in the TV/VCR. (Make sure the tape’s record
tab is intact and the tape is long enough to record the pro-
gram.)
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay start again at step 1.
PLAY
F.FWD
STOP
REW
STATUS/EXIT
1
1
4
7
2
5
8
3
6
9
CH.
1
Press the MENU button.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
REC/OTR
TRACKING
MUTE
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the F.FW D/B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press
the F.FW D/B button.
Helpful Hints
• If the power fails, programmed
timer recordings will be restored
when the clock is reset. (The clock
will reset itself automatically if you
are using the AUTO CLOCK feature.
Details are on pages 15-18. If you
are not using the AUTO CLOCK
feature, reset the clock manually.
Details are on pages 13-14.) The
timer recording will not occur only if
the timer recording was scheduled
to take place during the power fail-
ure.
● O NCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
● W EEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(exam ple)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
• You cannot set a timer recording if
DEFEAT RECORDING is set to ON.
Details are on page 36.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 33
4
Use the Num ber buttons (1-8) to select a position in
which to store the tim er recording. Flashing numbers indi-
cate an open position (one in which a timer recording has not
been stored yet).
4-7
NOTE: If you select a number that already has been used to store a
timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
for a few seconds. Then information about the program in that position
will appear on the screen. If this happens, press the STATUS/EXIT but-
ton. Then use the Number buttons to select another position.
POWER
SLEEP
PLAY
REW
F.FWD
STOP
5
STATUS/EXIT
Use the Num ber buttons to enter the channel of the TV
program you want to record.
● If you are recording from line input, press 0, 0. A/V IN will
appear on the screen.
1
4
7
2
3
6
9
CH.
5
8
● If you are recording using a Cable Box, enter the Cable Box
output channel (03 or 04). Be sure to select the channel of the
TV program at the Cable Box and leave the Cable Box on for
the timer recording.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
ONE TIME PROGRAM
PROGRAM
1
CHANNEL – – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the hour(s) you want the
recording to begin. Press two Num ber buttons for the
m inute(s) you want the recording to begin. Press 1 for
AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
– – : – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
7
Follow the instructions in step 6 to set the recording’s
stop tim e. (AM or PM will be set automatically.)
• If the numbers entered do not
match the TV/VCR’s calendar, the
entry will be rejected and a question
mark will appear on the screen.
• To make corrections while you are
programming a timer recording,
press the CLEAR button until the
cursor is flashing on the item you
want to change. Then enter the cor-
rect information.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
TIME OFF – – : – –
09:30 PM
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Instructions continue on page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Timer Recording (cont’d)
8
11 10
Press the Num ber 1 button to record in SP speed or
press the Num ber 2 button to record in SLP speed. Details
about tape speed are on page 29. You cannot use the SPEED button
at this time.
POWER
SLEEP
ONE TIME PROGRAM
PROGRAM
1
PLAY
REW
F.FWD
CHANNEL 10
STOP
TIME ON
09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
STATUS/EXIT
SP=1 SLP=2
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
1
4
7
2
3
6
9
CH.
5
8
8
VOL
.
ALT. CH
0
9
9
SPEED
MEMORY PAUSE/STILL
Press two Num ber buttons for the m onth and two
Num ber buttons for the day you want the program to
record. For example, for July 10, 1999, press 07, 10. The day of
the week and the year will be displayed automatically. (You cannot
program the TV/VCR to record more than one year in advance.)
REC/OTR
TRACKING
MUTE
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
10
09:30 PM
11:00 PM
SLP
START DATE 07/10/99
SATURDAY
Turn off the TV/VCR
for the recording.
Insert a tape in
the TV/VCR.
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
Leave the Cable
Box/DBS on
● If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
(if applicable).
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
Helpful Hints
• PROGRAM NOT COMPLETED
CLASH may appear on the screen
when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap, and
thus the current timer recording will
not be carried out.
● If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the PO W ER button to turn off the TV/VCR power.
The REC(ord) light will flash slowly if a tape is in the TV/VCR. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
• To stop a started timer recording,
press the STOP/EJECT button on the
TV/VCR.
Please see page 48 for more
Helpful Hints.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 35
Checking or Clearing Tim er Recordings
2-4
1
W ith the TV/VCR on, press the MENU button.
POWER
SLEEP
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the F.FW D/B button.
PLAY
REW
F.FWD
STOP
STATUS/EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
PRO GRAM REVIEW , then press the F.FW D/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
5
1
1
4
7
2
3
6
9
CH.
5
8
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
4
Press the F.FW D/B button to display inform ation about
the next program m ed tim er recording. (If you do not press
a button within 10 seconds, information about the next pro-
grammed timer recording will appear.) This will continue until all
positions have been displayed. Then, the menu will disappear. You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the tim er recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1 - 4 to m ake sure you have cleared the
correct position.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Defeat Recording
Follow the steps below to prevent accidental recording.
2-3
1
POWER
SLEEP
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
1
4
7
2
3
6
9
4
CH.
5
8
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
VCR SETUP
REC/OTR
TRACKING
MUTE
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
DEFEAT RECO RDING, then press the F.FW D/B button
so that O N appears beside DEFEAT RECO RDING.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
> DEFEAT RECORDING [ON]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
4
• If you set DEFEAT RECORDING to
ON after a timer recording has
been set, the timer recording will
not occur.
• You can not program a timer
recording if DEFEAT RECORDING is
set to ON.
Press the STATUS/EXIT button.
5
Now, REC DEFEATED will flash on the screen when you
press the REC(ord)/O TR button.
REC DEFEATED
• To set DEFEAT RECORDING to
OFF, repeat steps 1-2 above. At
step 3, press the PLAY/o button or
the STOP/p button to select
DEFEAT RECORDING, then press
the F.FWD/B button so that OFF
appears beside DEFEAT RECORD-
ING. Press the STATUS/EXIT
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play 37
Follow the steps below to program the TV/VCR to play a tape
over and over.
2-3
POWER
SLEEP
1
Press the MENU button.
PLAY
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
REW
F.FWD
STOP
STATUS/EXIT
1
1
4
7
2
3
6
9
4
CH.
5
8
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY, then press the F.FW D/B button so that
O N appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Helpful Hints
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
• The TV/VCR will stay in Repeat Play
mode until you set ONE TIME PLAY
to ON, even if the TV/VCR is turned
off. To set ONE TIME PLAY to ON,
follow steps 1-2 above. Then, press
the PLAY/o button or the STOP/p
button to select ONE TIME PLAY.
Press the F.FWD/B button so that
ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
• The real-time counter memory will
not function during Repeat Play
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 A-B Repeat Play
Follow the steps below to program the TV/VCR to play the mate-
rial between two specified points (A and B) on a tape over and
over again.
Insert a tape in the TV/VCR.
1
2
3-5
1
POWER
SLEEP
Insert a tape in the TV/VCR.
PLAY
2
REW
F.FWD
Press the MENU button.
STOP
STATUS/EXIT
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
1
4
7
2
3
6
9
CH.
5
8
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
3
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
TO END PRESS EXIT
B
Helpful Hints
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE
TIME PLAY to ON, follow steps 2-3
above. Then, press the PLAY/o
button or the STOP/p button to
select ONE TIME PLAY. Press the
F.FWD/B button so that ON
appears beside ONE TIME PLAY.
Then, press the STATUS/EXIT but-
ton.
5
Press the F.FW D/B button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
[A-B]
SELECT KL CHOOSE
TO END PRESS EXIT
B
• The end position (B) must be later
on the tape than the start position
(A).
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B Repeat Play (cont’d) 39
6
Press the STATUS/EXIT button to rem ove the display. A-
B REPEAT will appear on the screen. Beneath it, the letter A will
flash beside the real-time counter.
7-8
POWER
SLEEP
.
PLAY
REW
F.FWD
A-B REPEAT
0:12:34
STOP
A
STATUS/EXIT
1
4
7
2
3
6
9
6
7
CH.
5
8
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMO RY button to set the start position (A).
The flashing A will become a flashing B.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
.
A-B REPEAT
0:00:00
B
8
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMO RY button to set the end position (B).
● The length of time between the start position (A) and the end
position (B) must be at least three minutes.
9
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
Helpful Hints
• The counter cannot be memorized
or reset when you are using this
feature.
(TV programming will appear while the tape is rewinding.)
• Positions A and B will be erased
when you press the REC(ord)/OTR
button.
• A-B REPEAT will not appear on the
screen at step 6 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on the screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
• A-B Repeat Play will be retained if
you turn off the TV/VCR power.
However, if you eject the tape, A-B
Repeat Play will be cancelled.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1,5
POWER
SLEEP
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
PLAY
REW
F.FWD
STOP
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
STATUS/EXIT
3
1
4
7
2
3
6
9
01:08 PM
CH10
STOP
2
4
CH.
5
8
VOL
.
ALT. CH
0
SLP
1 : 23 : 45
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
3
W hile the counter rem ains on the screen, press the
CLEAR button to reset the real-tim e counter to zero.
0 : 00 : 00
4
W hile the counter rem ains on the screen, press the MEM-
O RY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00
5
To go to a tape location where the real-tim e counter was
reset to zero, press the REW (ind)/s button or the
F.FW D/B button when playback is stopped. W hen the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/o button to
watch the tape.
Helpful Hints
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 37.
• You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options 41
Forward and Reverse Searching (SP/LP/SLP)
1
POWER
SLEEP
During tape playback, press and release the F.FWD/B button or
the REW(ind)/{ button. A fast forward or reverse picture search
will begin.
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
To return to normal playback, press the PLAY/▲ button.
1
4
7
2
3
6
9
CH.
5
8
Super High Speed Searching (LP/SLP)
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
1
REC/OTR
TRACKING
MUTE
During tape playback, press the F.FWD/B button or the
REW(ind)/{ button, then press again. The TV/VCR will now
search in super high speed.
2
To return to normal playback, press the PLAY/▲ button.
Viewing a Still Picture
1
During tape playback, press the PAUSE/STILL button. A still pic-
ture will appear on the screen. The noise lines will move each
time you press the PAUSE/STILL button.
Helpful Hints
• Still mode will automatically switch
to Stop mode after five minutes to
protect the TV/VCR and the tape
from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or Super
Long Play. For details about tape
speed, see page 29.
2
To release the still picture and return to normal playback, press
the PLAY/▲ button.
• LP/SLP means this feature will work
with tapes recorded in Long Play
and Super Long Play. For details on
tape speed, see page 29.
• During forward and reverse search-
ing, horizontal noise bars will
appear on the TV/VCR screen.
• Tapes recorded in SLP speed will
have the clearest picture during for-
ward and reverse searching and Still
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Blue Background
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select
a channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
2-3
POWER
SLEEP
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
PLAY
1
REW
F.FWD
STOP
Press the MENU button.
STATUS/EXIT
1
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
1
4
7
2
3
4
CH.
5
8
6
9
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
2
Press the PLAY/o button or the STO P/p button to select
VCR SETUP, then press the F.FW D/B button.
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/o button or the STO P/p button to select
BLUE BACKGRO UND. Then, press the F.FW D/B button
repeatedly so that O FF (or O N) appears beside BLUE BACK-
GRO UND.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer 43
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
1-2
Press the SLEEP button. The sleep timer display will appear on
the screen. (You can not set the sleep timer during a recording.)
POWER
SLEEP
SLEEP
0
MIN
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
W ithin five seconds, press the SLEEP button repeatedly
to select 30 m inutes, 60 m inutes, 90 m inutes, or 120 m in-
utes. In a few seconds, the display will disappear. Then the
TV/VCR will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
1
4
7
2
3
6
9
CH.
5
8
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
SLEEP 10 SEC
GOOD NIGHT
● To see how much time remains until the TV/VCR shuts itself
off, press the SLEEP button once. The time remaining will
appear on the screen briefly. You cannot do this during a
recording.
● To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on the screen. The on-screen display will disap-
pear in a few seconds. You cannot cancel the sleep timer during
a recording.
Helpful Hints
• Finish all recordings before the
TV/VCR shuts itself off. If a record-
ing is in progress, the sleep timer
will be cancelled.
• A timer recording will not begin
unless the TV/VCR power is off.
Two minutes before a timer record-
ing starts, PLEASE TURN OFF FOR
TIMER RECORDING flashes on the
screen. If you see this message, turn
off the TV/VCR.
• If the power fails, you might lose
the sleep timer setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Volume Bar
Usually, the volume bar appears when you press the VOL(ume)
m/n button. If you do not need it, set the VOLUME BAR to OFF.
If VOLUME BAR is set to OFF, MUTE will not appear on the
screen when you mute the volume.
2-3
1
POWER
SLEEP
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
4
1
4
7
2
3
6
9
CH.
5
8
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
PRIMARY SETUP
REC/OTR
TRACKING
MUTE
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
VO LUME BAR, then press the F.FW D/B button. Each
press of the F.FWD/B button will turn the VOLUME BAR ON or
OFF.
4
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Reminder 45
The channel number will remain on the screen at all times (except
during tape playback) when you set REMINDER to ON.
Set REMINDER to ON or OFF by following the steps below.
2-3
POWER
SLEEP
PLAY
1
REW
F.FWD
STOP
Press the MENU button.
STATUS/EXIT
TO ADJUST PRESS { /
B
1
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
1
4
7
2
3
6
9
4
CH.
5
8
TINT
SHARPNESS
VOL
.
ALT. CH
0
SPEED
MEMORY PAUSE/STILL
REC/OTR
TRACKING
MUTE
2
Press the PLAY/▲ button or the STO P/▼ button to select
REMINDER.
TO ADJUST PRESS { /
B
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
3
Press the REW (ind)/{ button or the F.FW D/B button to
select O N or O FF. Each press of the REW(ind)/{ button or
the F.FWD/B button turns REMINDER ON or OFF.
TO ADJUST PRESS { /
B
CH12
ON
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
4
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Automatic Operation Features
The following playback features will always operate.
Autom atic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on
automatically when you insert a tape with the record tab intact. If
a timer recording is set and the TV/VCR power is off, the
TV/VCR will eject the tape if the record tab is missing.
Autom atic Rewind, Eject, O ff
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real-time counter is set
to zero. The TV/VCR will not turn itself off or eject the tape.
Mem ory Rewind, Power O ff
When the POWER button is pressed while the TV/VCR is rewind-
ing a tape, REW → POWER OFF will appear on the screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the counter was set to
zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
power cord must be connected). If a timer recording is pro-
grammed, a tape can not be ejected when the power is off. Turn
on the TV/VCR power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR power for the timer recording.
Autom atic Tracking Adjustm ent
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however,
you may get a better picture using the manual tracking controls
(see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p but-
tons on the TV/VCR or the TRACKING m/n buttons on the
remote control during tape playback.
Tracking returns to Automatic Tracking Adjustment when a tape
is inserted or when the STOP/p button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications/Glossary 47
Glossary
Specifications
General
CRT: 9-inch in line gun
Television system: NTSC-M
Video Heads: Two heads
Tape width: 1/2 inch (12.65 mm)
Tape speed
AUDIO Jack: jack located on the front of the
TV/VCR which is used to record audio from anoth-
er source.
Autom atic Channel Setup: process in which the
TV/VCR scans all available channels and places the
ones you receive in its memory. Then, when you
push the CHANNEL o/p buttons, you only scan
through channels you receive.
SP: 33.35 mm/sec.
LP: 16.67 mm/sec.
SLP: 11.12 mm/sec.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels
2-13) and UHF (ultra high frequency; channels
14-69).
• Cable – all standard channels can be received
without a Cable Box.
Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)
Relative Humidity: 10% to 75%
Power requirement: AC 120V/DC 13.2V, 60Hz
Power consumption: 65W (AC/DC)
Sound output: 0.8W
Dimensions:
Brightness: adjusting increases or decreases the
brightness of the color on the screen.
13" (H) x 12-1/8" (W) x 13" (D)
330mm x 308mm x 330mm
Weight: 18.8 lbs (8.5 kg)
Color: adjusting pales or brightens the TV/VCR
color.
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Dubbing: copying a tape using a VCR.
HQ : high quality; a feature in the TV/VCR circuitry
which provides enhanced picture detail.
Cable TV Channels
Midband: A – 1
Superband: J – W
Hyperband: A-5 – A-1
Special Channel: 5A
Ultraband: 37 – 94, 100 – 125
Line Input: The channel to which you set your
TV/VCR during dubbing. The line input channel is
always channel 00 (A/V IN).
Mode: a TV/VCR operation.
O TR: One-Touch Recording; a timed recording
that starts immediately and records for 30 minutes
to eight hours, whichever you specify.
Term inals
Antenna In: VHF/UHF 75 ohms unbalanced
Video In: RCA connector
Audio In: RCA connector
Earphone: 3.5 mm CES
Picture: adjusting increases or decreases the con-
trast of the picture on the screen.
Sharpness: adjusting softens or clarifies the picture
on the screen.
Electrical Specifications
Video input level: 0.5~2.0Vp-p
Audio input level: -10dBv
Video S/N ratio
SP: More than 42dBµ
Audio S/N ratio
Tape Speeds: how fast the tape travels during
playback or recording.
• SP (standard play) – fastest tape speed (record-
ing time for a T120 tape is approximately two
hours); best picture quality.
• LP (long play) – average tape speed; playback
only.
SP: More than 38dB
• SLP (super long play) – slowest tape speed
(recording time for a T120 tape is approximately
six hours).
Designs and specifications are subject to change without
notice and without our legal obligation.
Tint: adjusting changes the tints of the picture on the
TV/VCR from purple to green.
VIDEO Jack: jack located on the front of the
TV/VCR which is used to record video from anoth-
er source.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number
of your product before you call. This information is displayed on the back of the product. Also, please
take a moment to identify the problem you are having, and be prepared to explain this to the representa-
tive. If you believe the representative will need to help you with operations, please stay near the product.
Our representatives will be happy to assist you.
Location
For safe operation and satisfactory performance of your TV/VCR, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom
of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
• Do not use this TV/VCR under high temperature conditions.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the cord from the AC (alternating current) wall out-
let. Grasp it by the plug.
• If water is spilled on the TV/VCR, disconnect the power cord immediately and take the TV/VCR to an
authorized service center.
• Do not put your fingers or objects into the TV/VCR cassette compartment.
• Do not place anything on top of the TV/VCR.
Dew W arning/Display (Moisture Condensation)
• The TV/VCR has a sensor that detects moisture condensation. Moisture may condense inside the
TV/VCR when it is moved from a cold place to a warm place, after heating a cold room, or under con-
ditions of high humidity. If excessive moisture is present inside the TV/VCR, "DEW PROTECTION
PLEASE WAIT" appears on the screen. While "DEW PROTECTION PLEASE WAIT" appears, a safety
device prevents the VCR from operating until moisture is gone. When "DEW PROTECTION PLEASE
WAIT" appears on the screen, keep the TV/VCR power on, but do not try to play a tape. Allow at
least two hours for the TV/VCR to dry. "DEW PROTECTION PLEASE WAIT" may appear for up to
one hour after moisture is gone. During this time, you can not insert a cassette.
TV/VCR will not perform a tim er recording.
• Make sure the recording start and stop times are set correctly (pages 32-35). Midnight is 12 a.m.
Noon is 12 p.m.
• Make sure the TV/VCR power is off.
• Make sure the clock is set (pages 13-18).
• Make sure there is a tape in the TV/VCR. The tape must have a record tab.
• If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock
will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 15-18. If
you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 13-14.)
The timer recording will not occur only if the timer recording was scheduled to take place during the
power failure.
• Make sure DEFEAT RECORDING is set to OFF (page 36).
TV/VCR will not record.
• Make sure the tape has a record tab (page five).
• Make sure DEFEAT RECORDING is set to OFF (page 36).
• Make sure the TV/VCR has power. Details are on pages seven-eight.
• Check your hookups (pages six-eight).
• Set up the channels (page 11).
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints (cont’d) 49
The rem ote control is not available, or the rem ote control will not access the pop up m enu.
• Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 21). You can not
enter numbers (for example, to program a timer recording) using the front panel buttons.
TV/VCR has no power.
• Make sure the AC cord is connected completely to an AC (alternating current) outlet and to the AC
120V jack. Disconnect the car battery cord completely. For mobile connections, see page eight.
Channel reception is poor.
• Check connections, then set up the channels again (page 11).
TV/VCR does not have a picture.
• Adjust the antenna (pages six-eight).
• Adjust the TV/VCR picture controls (pages 26-27).
TV/VCR has poor sound or no sound.
• Adjust the volume.
• Press the MUTE button to restore the volume.
Tape playback is poor or tape is destroyed.
• Adjust the tracking. Details are on page 46.
• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try
to play a tape. Details are on page 48.
Rem ote control does not operate TV/VCR.
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 21.
• Remove all obstacles between the remote control and the TV/VCR.
• Inspect and replace the batteries in the remote control. Details are on page five.
Num ber buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. (Details are on page 23.)
A tape can’t be inserted into the TV/VCR.
• Insert the tape window side up, with the record tab facing you.
• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.
• Gently push on the center of the tape. Never force a tape into the TV/VCR.
• If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab
is missing.
• Moisture may be present in the TV/VCR. If “DEW PROTECTION PLEASE WAIT” appears on the
screen, you may not be able to insert a tape for several hours. Details are on page 48.
A tape can’t be rem oved from the TV/VCR.
• Make sure the AC cord is connected completely to an AC (alternating current) outlet and to the AC
120V jack. Disconnect the car battery cord completely. For mobile connections, see page eight.
• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR power for the timer recording.
TV/VCR ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page five.
The cylinder rotates when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The
quick play mechanism switches the tape mechanism from Stop to Play in just one second.
Autom atic clock setting won’t work.
• Disconnect the car battery cord from the DC 13.2V jack. Instead, use the AC 120V jack to supply stan-
dard electrical power. Details are on pages six-eight.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Limited Warranty
TV/VCR COMBINATION
90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)
This product must be carried in for repair.
WHO IS COVERED?
tribute the product, the local Philips service organiza-
You must have proof of purchase to receive warranty tion will attempt to provide service (although there
service. A sales receipt or other document showing
that you purchased the product is considered proof
of purchase.
may be a delay if the appropriate spare parts and
technical manual(s) are not readily available).
MAKE SURE YOU KEEP...
WHAT IS COVERED?
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced, and labor is free. From 90 days
to one year from the day of purchase, all parts will be
repaired or replaced, but you pay for all labor
charges. From one to two years from the day of pur-
chase, you pay for the replacement or repair of all
parts except the picture tube, and for all labor
charges. After two years from the day of purchase, you
pay for the replacement or repair of all parts, and for
all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service. Adjustments of the controls discussed there
may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUER-
TO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center
(see enclosed list) or authorized service center for
repair. When the product has been repaired, you
must pick up the unit at the center. Centers may
keep defective parts.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty on
all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this express
warranty. But, because some states do not allow limi-
tations on how long an implied warranty may last, this
limitation may not apply to you.)
• labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
• product repair and/or part replacement because of
misuse, accident, unauthorized repair or other
cause not within the control of Philips Consumer
Electronics Company.
• reception problems caused by signal conditions or
cable or antenna systems outside the unit.
• a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from
the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so the
above exclusion may not apply to you. This
includes, but is not limited to, prerecorded materi-
al, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or
tapes that have not been tested and labeled for
use in two, four, six, and eight hour VHS
recorders.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose. Philips
is not liable under any circumstances for any direct,
indirect, special, incidental or consequential damages,
howsoever incurred, even if notified of the possibility
of such damages.)
REMEMBER...
Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.
• a product that is used for commercial or institu-
tional purposes.
MODEL # __________________________________
SERIAL # __________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Philips
Consumer Electronics Company. In countries where
Philips Consumer Electronics Company does not dis-
This warranty gives you specific legal rights. You may have
other rights which vary from state to state.
Philips Service Solutions Group, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
EL4963E005 / MAC 6108/ 12-98
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 51
a-b repeat play . . . . . . . . .38-39
accessories . . . . . . . . . . . . . . .52
ant(enna) jack . . . . . . . . .6-8, 22
audio jack . . . . . . . . . . . . .21, 31
automatic
memory
button . . . . . . . . . . .24, 38-40
real-time counter . . . . . . . .40
rewind, power off . . . . . . .46
menu
stop/p button . . . . . . . . . . . .24
stop/eject button . . . . . . . . . .21
super high speed searching . . .41
super long play . . . . . . . . .29, 47
playback . . . . . . . . . . . . . . .46
rewind . . . . . . . . . . . . . . . .46
button . . . . . . . . . . . . . . . .24
front panel button access . .21
mute button . . . . . . . . . . . . . .23
table of contents . . . . . . . . . . .4
tape
duplication . . . . . . . . . . . . .31
speed . . . . . . . . . . . . . .29, 47
time
setting . . . . . . . . . . . . . .13-18
zone . . . . . . . . . . . . . . . . . .20
timer recording
cancelling . . . . . . . . . . . . . .35
reviewing . . . . . . . . . . . . . .35
setting . . . . . . . . . . . . . .32-34
tint, adjusting . . . . . . . . . . .26-27
tracking . . . . . . . . . . . . . . . . .46
batteries . . . . . . . . . . . . . . . . . .5
blue background . . . . . . . . . . .42
brightness, adjusting . . . . .26-27
number buttons . . . . . . . . . . .23
one-touch recording . . . . . . . .30
car battery cord . . . . . . . . .8, 22
channel
pause/still button . . . . . . .24, 41
picture, adjusting . . . . . . . .26-27
play button . . . . . . . . . . . .21, 23
playback options . . . . . . . . . . .41
playing . . . . . . . . . . . . . . . . . .28
power
above 100 . . . . . . . . . . . . .23
adding . . . . . . . . . . . . . . . .12
buttons . . . . . . . . . .21, 24, 46
deleting . . . . . . . . . . . . . . .12
reviewing . . . . . . . . . . . . . .12
setup . . . . . . . . . . . . . . . . .11
clear button . . . . . . . . . . . . . .23
clock . . . . . . . . . . . . . . . . .13-18
color, adjusting . . . . . . . . .26-27
connections . . . . . . . . . . .6-8, 31
contents, table of . . . . . . . . . . .4
controls
button . . . . . . . . . . . . .21, 23
cord . . . . . . . . . . . . . . . .7, 22
video jack . . . . . . . . . . . . .21, 31
volume bar . . . . . . . . . . . . . . .44
real-time counter memory . . .40
rear panel . . . . . . . . . . . . . . . .22
rec/otr button . . . . . . . . .21, 24
rec(ord) light . . . . . . . . . . . . .21
recording . . . . . . . . . . . . . . . .29
reminder . . . . . . . . . . . . . . . .45
remote
warranty . . . . . . . . . . . . . . . . .50
remote . . . . . . . . . . . . .23-24
tv/vcr . . . . . . . . . . . . . . . . .21
counter only mode . . . . . . . . .25
control
daylight-savings time . . . . . . . .19
dc 13.2v jack . . . . . . . . . . . .8, 22
defeat recording . . . . . . . . . . .36
duplication . . . . . . . . . . . . . . .31
buttons . . . . . . . . . .23-24
using . . . . . . . . . . . . . . . .5
sensor . . . . . . . . . . . . . . . .21
repeat play . . . . . . . . . . . . . . .37
rerecording . . . . . . . . . . . . . .31
rew(ind) button . . . . . . . . . . .21
rew(ind)/{ button . . . . . .24, 41
rewinding . . . . . . . . . . . . . . . .41
earphone jack . . . . . . . . . . . . .21
erasure prevention . . . . . . . . . .5
fast forward search . . . . . . . . .41
f.fwd/B button . . . . . . . . .23, 41
f.fwd button . . . . . . . . . . . . . .21
front panel . . . . . . . . . . . . . . .21
safety precautions . . . . . . . . . .3
searching . . . . . . . . . . . . . . . .41
sensor (remote) . . . . . . . . . . .21
sharpness, adjusting . . . . . .26-27
sleep timer . . . . . . . . . . . . . . .43
slp . . . . . . . . . . . . . . . . . .29, 47
smartclock . . . . . . . . . . . . .15-18
sp . . . . . . . . . . . . . . . . . .29, 47
specifications . . . . . . . . . . . . .47
standard play . . . . . . . . . .29, 47
status display . . . . . . . . . . . . .25
status/exit button . . . . . . .24-25
still picture . . . . . . . . . . . . . . .41
glossary . . . . . . . . . . . . . . . . .47
helpful hints . . . . . . . . . . . .48-49
hookups . . . . . . . . . . . . .6-8, 31
language selection . . . . . . . . . .10
line input mode . . . . . .11, 31, 47
long play . . . . . . . . . . . . . .29, 47
lp . . . . . . . . . . . . . . . . . .29, 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSO RIES
The following items are supplied with your TV/VCR; they
are provided to help you use or set up your TV/VCR.
POW
ER
SLEEP
REW
PLAY
STOP
STATUS/EX
MENU
F.FWD
1
CLEAR
2
4
3
5
7
6
8
CH
SPEED
9
0
M
EM
REC/OTR
ORY
ALT. CH
PAUSE/STILL
Detachable AC Cord 4835 321 17141
VOL
TRACKING
MUTE
Remote Control 4835 218 37242
Two AA Batteries 4835 138 17012
Indoor (VHF) Rod Antenna
4835 303 37006
Car Battery Cord 4835 321 57008
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your
TV/VCR, but they are designed for use with your new
TV/VCR.
To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
Monaural Audio and Video Cables (6 feet)
VHS Cassette Rewinder
#M61117
Color-coded for easy connection
#M61103
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
IB8127E003
Printed In Malaysia
0EMN01552 / T4012XN * * * * *
As an ENERGY STAR® Partner, Philips Consumer Electronics
Company has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
This owner’s manual is made of recycled paper.
Download from Www.Somanuals.com. All Manuals Search And Download.
|