Philips TV VCR Combo 25PV707 User Manual

CONTENTS  
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4 7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 15  
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting a decoder or other equipment . . . . . . . . . . . . 4  
’VPS’ (Video Programming System) and ’PDC’  
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 15  
Programming a recording (with ’VIDEOplus’) . . . . . . . . 15  
Programming a recording (without ’VIDEOPlus’) . . . . . 16  
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 17  
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5  
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6 8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 6  
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 6  
Allocating a channel number . . . . . . . . . . . . . . . . . . . . . . . 7  
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Automatic time and date setting (SMART CLOCK) . . . . . 8  
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Changing the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Switching the On-screen display (OSD) on or off . . . . . 19  
Switching to 16:9 wide screen picture . . . . . . . . . . . . . . 19  
Switching the remote control command . . . . . . . . . . . . . 20  
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Sound playback without picture . . . . . . . . . . . . . . . . . . . . 21  
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 21  
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 21  
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . . 9  
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . . 9  
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22  
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 10  
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Selecting a preset picture setting (SMART PICTURE) . 10  
Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Switching Dolby Virtual Surround on or off . . . . . . . . . . 11  
Selecting a preset sound setting (SMART SOUND) . . . 11  
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 11  
Dolby Virtual Surround - Setting the speakers . . . . . . . 11  
Sound track selection in TV mode . . . . . . . . . . . . . . . . . . 11  
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Searching for tape position with the picture (picture  
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Searching for tape position without the picture (wind  
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Automatic search for a tape position (index search) . . 12  
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 13  
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Recording without automatic switch-off . . . . . . . . . . . . 14  
Recording with automatic switch-off (OTR  
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 14  
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Selecting the recording speed (SP or LP) . . . . . . . . . . . . 14  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS IN BRIEF  
The remote control  
D
C
Select: Cursor left  
Select: Cursor right  
Select: One line up  
Select: One line down  
STANDBY m Switch off : To switch off set, interrupt menu  
function, interrupt a programmed recording  
(TIMER)  
A
B
TELETEXT e TELETEXT: To switch TELETEXT on/off  
qSr Volume: To regulate the volume  
SURROUND (red) Dolby Virtual Surround: To switch Surround  
y
Volume off: To switch the volume on or off  
Sound on/off  
z
Previous programme number: To select the previous programme number  
red TELETEXT: Select page/chapter shown at the  
bottom of the screen  
qP r Programme number: To select a programme number up or down  
SMART (green) SMART PICTURE: To show the preset picture  
PLAY G Playback : To play a recorded cassette  
settings  
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning  
green TELETEXT: Select page/chapter shown at the  
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made  
bottom of the screen  
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward  
scanning  
SMART #(yellow) SMART SOUND: To show the preset sound  
settings  
INDEX E Index search: In combination with  
H
/
I
: to search for previous/next recording  
yellow TELETEXT: Select page/chapter shown at the  
on the cassette.  
bottom of the screen  
RECORD/OTR n Record: To record the programme selected  
STILL R Still picture: To stop the tape and show a still picture  
AUDIO (blue) Audio: To select the required sound track  
blue TELETEXT: Select page/chapter shown at the  
bottom of the screen  
0-9 Number buttons: 0 - 9  
CLEAR e Delete : To delete last entry or clear  
programmed recording (TIMER)  
TELETEXT: To select TELETEXT info page 100  
TIMER s TIMER: To make a manual TIMER  
programming or to alter or clear a  
programmed TIMER  
MENU Menu : To call up or end main menu  
OK Store/Confirm: To store or confirm entry  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front of the set  
Back of the set  
2
Aerial input socket: To connect the aerial cable  
8
Power switch : To switch off the set  
Beware: When you switch the set off with the power switch, TIMER-recordings are not possible!  
L AUDIO R Audio output, left/right stereo: To connect actve speakers, a HiFi-set or a ’Dolby Prologic’-decoder.  
EXT.1 Scart socket: To connect a decoder, satellite receiver, video recorder, etc.  
EXT.2 Scart socket: To connect a satellite receiver, video recorder, etc.  
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)  
P p Programme number : To select programme number up or down  
Sp Volume: To regulate the volume  
H
I
5
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning  
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning  
Record: To record the programme selected  
G
Playback : To play a recorded cassette  
?
Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette  
L AUDIO R Audio input socket left/right stereo  
VIDEO Video input socket : To connect a camcorder or videogames  
w
Headphones socket: To connect headphones  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special functions on your TV-VIDEO Combi  
If a TV channel which transmits TXT/PDC is stored under programme number  
P01’, time and date will automatically be taken from the TXT/PDC information.  
This function allows you to save the playback settings that suit you best. Select  
your own personal settings for the type of film you are currently watching.  
This function allows you to save the sound settings that suit you best. Select  
your own personal settings for the type of film you are currently watching.  
When you have plugged your TV-VIDEO Combi into the mains, you will be  
welcomed with an OSD picture. All you have to do is follow the instructions in  
the "intelligent help line" for the next step. Enjoy the Automatic TV channel  
search/save function and the automatic time adjustment.  
Automatic Volume Leveller. This prevents a sudden increase of the volume, for  
example, during commercials.  
Philips has developed a system which produces the best possible playback  
quality. It reduces disturbance on old, worn video cassettes, and emphasises  
the detail on very good quality cassettes.  
Simple programming system for TV-VIDEO Combis. Makes programming as easy  
as making a telephone call. Simply enter the programme code which you will  
find in your listings magazine.  
The precision tape drive from Philips with rewind times of 100 seconds (E180)  
and automatic tape length recognition.  
We guarantee that your TV-VIDEO Combi will switch to the new millennium with  
no problems whatsoever.  
Dolby Virtual Surround, the ease of use solution to enjoy best sound effects at  
home without the need to purchase and connect additional rear speakers.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. CONNECTING YOUR TV-VIDEO COMBI  
Important for the United Kingdom  
Connecting the cables  
This apparatus is fitted with an approved moulded 13 Amp  
plug. To change a fuse in this type of plug proceed as follows:  
a Remove fuse cover and fuse.  
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or  
BSI approved type.  
c Refit the fuse cover.  
If the fitted plug is not suitable for your socket outlets, it should  
be cut off and an appropriate plug fitted in its place.  
If the mains plug contains a fuse, this should have a value of  
5A. If a plug without a fuse is used, the fuse at the distribution  
board should not be greater than 5A.  
a Insert the aerial plug into the 2 socket.  
DNote: * The severed plug must be destroyed to avoid a  
possible shock hazard should it be inserted into a 13A  
socket elsewhere.  
b Insert the plug of the mains cable into the wall socket.  
c If the little red light at the front of the set is not alight,  
please switch on the set. The power switch 8 is  
located on the left side panel of the set.  
How to connect a plug:  
The wires in the mains lead are coloured in accordance with  
the following code:  
BLUE - ’NEUTRAL’ (’N’)  
BROWN - ’LIVE’ (’L’)  
Connecting a decoder or other equipment  
d The BLUE wire must be connected to the terminal which  
is marked with the letter ’N’ or coloured BLACK.  
You can also connect additional equipment, for instance, a  
decoder, a satellite receiver or camcorder to the EXT.1  
socket or a satellite receiver, camcorder to the EXT.2 socket.  
e The BROWN wire must be connected to the terminal  
which is marked with the letter ’L’ or coloured RED.  
E If you don’t connect a decoder, use the EXT.1 socket for  
f Do not connect either wires to the earth terminal in the  
plug which is marked with the letter ’E’ or by the safety  
earth symbol \or coloured green or green-and-yellow.  
connecting other equipment.  
You can connect active speakers, a hifi-stereo set or a ’Dolby  
Prologic’ decoder to the socket L AUDIO R (audio output  
left/right).  
Before replacing the plug cover, make certain that the cord  
grip is clamped over the sheath of the lead - not simply over  
the two wires.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. INSTALLING YOUR TV-VIDEO COMBI  
Initial installation  
Allocating a decoder  
a Open up the battery compartment of your remote control  
Some TV stations will send coded TV channels, that you can  
only watch when you use a decoder. You can connect such a  
decoder (descrambler) to your TV-VIDEO Combi. With the  
following function, the connected decoder will automatically  
be activated for the TV programme you want to watch.  
and place the batteries in it as shown in the picture.  
a Choose the TV channel on which you wish to use the  
decoder with the P q or P r buttons on the TV-VIDEO  
Combi or the number buttons 0-9 on the remote control.  
b Close the battery compartment.  
b Press the MENU button on the remote control. The main  
c If the aerial (antenna) has been connected to the  
TV-VIDEO Combi, press the OK button.  
’Automatic TV channel search’ starts. This picture will  
appear on the screen:  
menu will appear.  
c Select the line ’Installation’ with the B or  
A buton and confirm with the C button.  
d Select the line ’Manual store’ with the B or  
A button and confirm with the C button.  
e Select the line ’Decoder’ with the B or A button.  
Searching...  
CHANNELS FOUND:  
MANUAL STORE  
//////,,,,,,,,,,,,,,,,,,,,,  
Channel/Frequency  
TV system  
FREQU.  
PAL  
125  
I
Search  
Fine tuning  
Name edit  
(,,,,,,n=,,,,,,$  
xxx  
Programme number  
Decoder  
01  
OFF  
ON  
NICAM  
Wait until all TV channels have been found. This can take  
several minutes.  
When ’autoinstall’ is ready, ’Installation  
comp.’ will briefly appear on the TV screen.  
ã
«
Exit:  
press MENU  
f Select function ’ON’ with the D or C button. When  
DIf you have connected a decoder, you must install it  
you select ’OFF’, the function will be switched off.  
as described in the next section.  
g Confirm with the OK button.  
DIf you have connected a satellite receiver, please  
read the section ’satellite receiver’.  
h To end, press the MENU button.  
Your decoder has now been allocated to this TV channel.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
i If you want to change the automatic tv channel setting,  
select the line ’Fine tuning’.  
Manual TV channel search  
With the D or C button you can vary the automatic tv  
channel setting. Important: This re-tuning is only  
necessary and useful in special cases, e.g.: when there  
are stripes on the picture with cable-TV systems.  
In certain cases the ’Automatic TV channel search’ may not be  
able to find all of the TV channels (e.g. coded TV channels). In  
that case, use this manual method to set the channels.  
a Press the MENU button on the remote control. The main  
j Press the OK button to store the TV channel.  
menu will appear.  
DIf you want to search for further TV channels, start  
b Select the line ’Installation’ with the B or  
again at step e.  
A button and confirm with the C button.  
k To end, press the MENU button.  
c Select the line ’Manual store’ with the B or  
A button and confirm with the C button.  
Satellite receiver  
MANUAL STORE  
You can receive channels from the satellite receiver via the  
scart socket EXT.1 .  
To do this, select the channel number ’E1’ with the qP r  
button. You will have to select the channels to be received by  
the satellite receiver on the receiver itself.  
Channel/Frequency  
TV system  
Search  
Fine tuning  
Name edit  
Programme number  
Decoder  
NICAM  
FREQU.  
PAL  
125  
I
(,,,,,,n=,,,,,,$  
xxx  
01  
OFF  
ON  
ã
«
Exit:  
press MENU  
Special installation functions  
d In the line ’Channel/Frequency’, select the  
display for:  
You can select one of the following installation functions in  
order to adapt your TV-VIDEO Combi to your own specific  
requirements.  
FREQU.: frequency  
C CH: channel  
S CH: special channel  
Automatic TV channel search  
e If you know the frequency or channel of the desired TV  
channel, you can enter the data in line ’Search’ with  
the digit buttons 0-9 .  
Your TV-VIDEO Combi will search for all TV channels.  
If you want to start the automatic TV channel search again,  
then follow the instructions below.  
DIf you don’t know the frequency or channel of the TV  
channel of your choice, press the C button to start  
the channel search.  
a Press the MENU button on the remote control. The main  
menu will appear.  
b Select the line ’Installation’ with the B or  
f In the line ’Programme number’ select the  
programme number you want e.g.: ’P01’, using the  
D or C button.  
A button and confirm with the C button.  
c Select the line ’Autoinstall’ with the B or  
A
button.  
g If you want to change the TV channel name, press the  
C button in line ’Name edit’.  
E Select the character you want to change with the D or  
the C button. Change the character with the B or the  
A button. Select the next character in the same way.  
E To confirm the information, press the OK button.  
h In the line ’NICAM’, select funtion ’ON’ or ’OFF’ with  
the C or D button.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
d Press the C button. The ’Automatic TV channel search’  
Allocating a channel number  
starts.  
a Press the MENU button. The main menu will appear.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
Searching...  
CHANNELS FOUND:  
c Select the line ’Sort channels’ with the B or  
A button and confirm with the C button.  
//////,,,,,,,,,,,,,,,,,,,,,  
SORT CHANNELS  
01 xxx  
02 yyy  
03 zzz  
04 aaa  
05 bbb  
06 ccc  
e When the TV channel search is complete,  
Installation comp.’ will appear on the  
screen.  
How to search for a TV channel manually, you can read in the  
section ’Manual TV channel search’.  
ã
«
Exit:  
press MENU  
To move:  
press OK  
DAutomatic Channel Installation ():  
Some cable companies or broadcasters offer the  
possibility to install TV channels automatically with ’ACI’.  
Information about the installation offered and how to  
select it, will appear on the screen.  
d With the B , A , D or C button, select the TV  
channel to which you want to allocate a programme  
number and press the OK button.  
e With the B , A , D or C button, shift the TV  
channel to the programme number you wish to allocate to  
this TV channel and press the OK button.  
This set will recognize and install TV channels with ’ACI’  
automatically.  
TV channels will be stored from programme number 1  
onward.  
If ’ACI’ cannot identify a TV channel, you can search for it  
using the method as described in the section ’Manual TV  
Channel Search’.  
f Repeat steps dto euntil you have allocated a  
programme number to all the required TV channels.  
g To end, press the MENU button.  
Delete a TV Channel  
a Press the MENU button. The main menu appears.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button .  
c Select the line ’Sort channels’ with the B or  
A button and confirm with the menu button C .  
SORT CHANNELS  
01 xxx  
02 yyy  
03 zzz  
04 aaa  
05 bbb  
06 ccc  
ã
«
Exit:  
press MENU  
To move:  
press OK  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
d With the B , A , D or C button, select the TV  
channel you want to delete and press the CLEAR e  
button.  
f To end, press the MENU button.  
Automatic time and date setting (SMART  
CLOCK)  
DIf a television programme, which transmits TELETEXT, is  
stored with programme number ’P01’, time and date will  
be set automatically.  
e Repeat step d, until you have deleted all the required  
TV channels.  
f To end, press the MENU button.  
DTime will automatically be adjusted to winter time and  
summer time.  
Setting the language  
a Select the line ’Smart clock’ with the menu buttons  
You can select the language for the on-screen display (OSD).  
B or A .  
a Press the MENU button on the remote control. The main  
b Switch the function on with the menu buttons D or  
menu will appear.  
C .  
b Select the line ’Installation’ with the B or  
c Confirm with the OK button.  
A button and confirm with the C button.  
d To end, press the MENU button.  
c Select the line ’Language’ with the B or  
A
button.  
d Select your language with the D or C button.  
e To end, press the MENU button.  
Setting the time and date  
a Press the MENU button on the remote control. The main  
menu will appear.  
b Select the line ’Installation’ with the B or  
A button and confirm with the C button.  
c Select the line ’Set clock’ with the B or  
A
button and confirm with the C button.  
SET CLOCK  
Time  
15:36  
1999  
6
Year  
Month  
Date  
Smart clock  
8
ON  
ã
«
Exit:  
press MENU  
d Check the time in line ’Time’. If required, please change  
the time with the 0-9 buttons on the remote control.  
e Check ’Year’, ’Month’ and ’Date’ in the same way.  
You can switch between entry fields with B or  
A
button. Confirm each entry with the OK button.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. IMPORTANT NOTES FOR OPERATION  
SUMMARY OF USER GUIDE  
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.  
PICTURE  
MAIN MENU  
Brightness  
(,,,,,,,,,,,,  
(,,,,,,,,,,  
(,,,,,,,  
(,,,,,,,,  
NATURAL  
OFF  
Colour  
Contrast  
Picture  
Sound  
Sharpness  
Tint  
Setup  
Contrast Plus  
Store as pref.  
Tape  
NO  
Installation  
ã
«
Exit:  
press MENU  
ã
«
Exit:  
press MENU  
Chapter ’TV FUNCTIONS’  
User guide (OSD)  
SOUND  
The OSD (On-screen display) shows the various functions in  
the form of a menu on the television screen. You can then  
choose the settings you require. There is a summary of the  
menus on this page. The main button functions are displayed  
in a help line along the bottom of the screen.  
Volume  
(,,,,,,,,,,,,  
(,,,,,,,,=,,,,,,$  
(,,,,,,,,=,,,,,,$  
(,,,,,,,,=,,,,,,$  
NEUTRAL  
Balance  
Bass  
Treble  
Sound mode  
Surround  
Auto volume cont.  
Store as pref.  
OFF  
OFF  
YES  
E To call up the menu: With the MENU button.  
E To select a line: With the B or A button.  
E To select within a line: With the D or C button.  
ã
«
Exit:  
press MENU  
Chapter ’TV FUNCTIONS’  
E To enter or change your selection: With the 0-9 , D or  
C button.  
E To cancel: With the MENU button.  
E To save: With the OK button.  
E To confirm: With the C button.  
E To close the menu: With the MENU menu button.  
SETUP  
Parental control  
OFF  
Display  
MAX  
Format 16:9  
Sound only  
VCR 1/2  
NORMAL  
OFF  
VCR  
1
ã
«
Exit:  
press MENU  
Chapter ’ADDITIONAL FUNCTIONS’  
TAPE  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
USED  
OFF  
E To confirm the messages in red on the screen: Press the  
AUTO  
OK button.  
N. ACT.  
Tracking  
Cleaning  
(,,,,,,,,=,,,,,,$  
E You can switch the machine on with the qP r ,  
z
or 0-9 button or by putting in a cassette.  
ã
«
Exit:  
press MENU  
Chapter ’PLAYBACK FUNCTIONS’  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. TV SET FUNCTIONS  
Selecting a TV programme  
Volume control  
Select the required TV channel (=programme number) with the You can control the volume level with the qSr , D or  
P r , P q , B or A button or with the digit buttons  
C button.  
0-9 on the remote control.  
If you want to mute the sound temporarily (e.g.: during a  
telephone call), press the y button on the remote control.  
When you press the y button again, the sound will return at  
its original volume level.  
DIf you don’t know the programme number of the required  
TV channel:  
a Press the qP r button for more than 2 seconds.  
The TV channel list appears on the screen.  
b Select the required TV channel with the qP r  
button.  
Sound settings  
After 1 second the TV-VIDEO Combi will switch to  
the selected programme number.  
You can select between several sound settings, to meet your  
personal sound preferences.  
a Press the MENU button. The main menu appears.  
Picture settings  
b Select the line ’Sound’ with the B or A button and  
confirm with the C button.  
a Press the MENU button. The main menu appears.  
b Select the line ’Picture’ with the menu buttons  
B
SOUND  
or A and confirm with the menu button C .  
Volume  
(,,,,,,,,,,,,  
(,,,,,,,,=,,,,,,$  
(,,,,,,,,=,,,,,,$  
(,,,,,,,,=,,,,,,$  
NEUTRAL  
Balance  
Bass  
Treble  
Sound mode  
Surround  
Auto volume cont.  
Store as pref.  
PICTURE  
OFF  
OFF  
YES  
Brightness  
(,,,,,,,,,,,,  
(,,,,,,,,,,  
(,,,,,,,  
(,,,,,,,,  
NATURAL  
OFF  
Colour  
Contrast  
Sharpness  
Tint  
ã
«
Exit:  
press MENU  
Contrast Plus  
Store as pref.  
NO  
ã
«
Exit:  
press MENU  
c Select the required line with the B or A button and  
alter with the D or C button.  
E In the line ’Sound mode’ select one of these options:  
c Select the required line with the menu buttons B or  
NEUTRAL: neutral sound setting  
A and alter with the menu buttons D or C .  
LOUDN.: when the volume level is low, high and low  
sound accentuated  
SPATIAL: spacious stereo effect  
D’Contrast Plus’: Enhances TV contrast by making the  
white whiter and the black blacker.  
DTo store a setting as a standard setting, select the  
DTo store this setting as a standard setting, select the  
line ’Store as pref.’ with the menu buttons  
B or A . Select ’YES’ and confirm with the  
OK button.  
line ’Store as pref.’ with the B or  
button. Select ’YES’ and confirm with the OK  
button.  
A
DTo call up the standard settings, switch the set off  
and on again or select ’Smart Sound’ setting  
PERSONAL’.  
Selecting a preset picture setting (SMART  
PICTURE)  
D’SMART PICTURE’: Optimises all picture settings using a  
single button on the remote control.  
E Press the SMART (green) button repeatedly to select the  
required picture setting.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d In the line ’Speakers’ select one of these settings  
with the D or C buttons:  
Switching Dolby Virtual Surround on or off  
a To switch on the Dolby Virtual Surround effect, in the line  
ACTIVE: only if you have connected active speakers.  
All sound settings will be controlled via your TV VIDEO  
Combi.  
HIFI: only if you have connected a HIFI stereo set. The  
sound settings for the external speakers will be  
controlled via the HIFI stereo set. The sound settings for  
the internal speakers will be controlled via the TV VIDEO  
Combi.  
Surround’ select ’ON’ with the D or C button.  
E You can always simply switch the function on/off with the  
SURROUND (red) button on the remote control.  
DIf Surround Sound is switched on, the line ’Sound  
mode’ in the Sound menu will be deactivated.  
Selecting a preset sound setting (SMART  
SOUND)  
LINE: this is the standard setting. Internal speakers  
are active. The L AUDIO R socket sound output is fixed in  
nominal level.  
D’SMART SOUND’: Provides a choice of sound settings  
e Confirm with the OK button.  
from the remote control.  
E Press the SMART #(yellow) button repeatedly to select  
f In the line ’Surround setting’ select one of  
the desired sound setting.  
these settings:  
VIRTUAL: Surround Sound effect possible with  
internal or external speakers  
3STEREO: Surround Sound effect possible only with  
additional external speakers connected.  
DIf Surround Sound is switched on, ’Smart Sound’ will be  
switched to ’MANUAL’.  
Automatic volume control (AVL)  
E Switch on ’Auto volume cont.’, to activate the  
automatic volume control. It minimises sudden changes  
in TV volume, e.g. when commercial spots are  
g Confirm with the OK button.  
h To switch on the test tone, in the line ’Test tone’  
select ’ON’ with the D or C button.  
transmitted or when switching TV channels.  
You will hear a test tone. Now select the best volume for  
the internal and external speakers.  
DThe AVL function will only affect the internal speakers.  
DAs the test tone only makes sense using external  
speakers, the machine will automatically switch to  
3STEREO’. It will automatically switch back to the  
setting you selected last.  
Dolby Virtual Surround - Setting the  
speakers  
DIf you have connected a headset, you will not  
If you have connected active speakers or a HiFi stereo set to  
your TV VIDEO Combi, you can carry out several speaker  
settings.  
experience the complete surround effect.  
i To end, press the MENU button.  
a Press the MENU button. The main menu appears.  
b Select the line ’Installation’ with the B or  
Sound track selection in TV mode  
A button and confirm with the C button.  
You can select the required sound track. This is of particular  
interest when audio transmissions are multilingual.  
c Select the line ’Speaker setup’ with the B or  
A button and confirm with the menu button C .  
E Press the AUDIO (blue) button to select one of the  
following options:  
SPEAKER SETUP  
STEREO transmissions: STEREO’ and ’MONO’  
Multilingual transmissions: DUAL I’ and ’DUAL II’  
Test tone  
OFF  
Surround setting  
Speakers  
VIRTUAL  
LINE  
DWhile a tape is playing, you can also select one of the  
following modes: ’LEFT’, ’RIGHT’, ’MIX’. In the ’MIX’  
mode you can play the mono sound of the normal (linear)  
audio track together with the sound of the stereo audio  
track. You can play casettes that have been dubbed on  
another video recorder.  
Neutral speaker  
ã
Exit:  
press MENU  
«
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PLAYBACK FUNCTIONS  
Playing a cassette  
Searching for tape position with the picture  
(picture search)  
a Put a cassette into the cassette slot.  
b Press the PLAY G button.  
a While a cassette is playing, press the H (reverse) or  
I (forward) button once or several times.  
c If you press the STOP h button once, the TV-VIDEO  
Combi will switch to pause. To stop, press the STOP h  
button again.  
b To stop at a certain picture, press the PLAY G button.  
DDuring picture search, the picture quality may not be  
so good and there will be no sound.  
d To eject the cassette, press the ? button on the  
TV-VIDEO Combi or press the STOP h button on the  
remote control several seconds.  
Still picture  
a Press the STILL R button. A still picture will appear on  
DSome hired cassettes may have a poor picture or  
poor sound quality. This is not a fault in your  
machine. Please read ’Eliminating picture  
interference’.  
the screen.  
b Each time you press STILL R again, the picture will  
move on one step.  
DSome functions switch off automatically after a  
while (for example, pause, still picture, picture  
search). This helps to protect the cassette and  
avoids wasting power.  
Slow motion  
a Press the STILL R button. A still picture will appear on  
the screen.  
b When you hold the STILL R button, the tape will be  
Playing NTSC cassettes  
played in slow motion.  
With this set you can play cassettes that have been recorded  
on another video recorder in the NTSC standard (for example,  
American cassettes).  
c When you press the I button several times, you have  
a choice of several playback speeds.  
During slow motion there will be no sound.  
DSome special features (for example, still picture) are not  
Searching for tape position without the  
picture (wind and rewind)  
possible while you are playing an NTSC cassette.  
a Stop the tape with the STOP h button.  
b Press the H (reverse) or I (forward) button.  
c To stop at a certain picture, press the STOP h button.  
Tape position indication  
DPress the OK button to display the current tape position.  
DTo change the type of tape position display, proceed as  
Instant View  
follows:  
With this function you can switch to picture search during  
wind and rewind.  
a During playback, press the MENU button.  
b Select the line ’Tape’ with the menu buttons B or  
a If you hold the H (rewind) or I (wind) button  
A and confirm with the C button.  
during wind or rewind, you will switch to picture search.  
c Select the line ’Tape counter’ with the menu  
b When you release the button, the TV-VIDEO Combi will  
buttons B or A .  
automatically switch back to rewind or wind.  
d With the menu buttons D or C select ’USED’ to  
check the time used, or ’LEFT’ to check the time left on  
the tape.  
Automatic search for a tape position (index  
search)  
At the start of each recording, the TV-VIDEO Combi will write  
an index code on the tape.  
e Confirm with the OK button.  
a Press the INDEX E button. Press the I button to  
select the next code mark or the H button for the  
previous code mark.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b When the TV-VIDEO Combi finds the code mark, it will  
Cleaning the video heads  
automatically switch to play.  
If horizontal lines appear on the screen when you play a  
cassette, you should clean the video heads.  
Picture interference  
When the picture quality is poor when you play a cassette,  
please follow these instructions.  
Tracking during playback  
a During playback, press the MENU button.  
b Select the line ’Tape’ with the menu buttons B or  
A and confirm with the C button.  
c Select the line ’Tracking’ with the menu buttons  
B or A .  
d Hold the menu buttons D or C until the playback  
a During playback, press the MENU button.  
quality is at its best.  
b Select the line ’Tape’ with the menu buttons B or  
e Confirm with the OK button.  
A and confirm with the C button.  
f To end, press the MENU button. This setting will remain  
c Select the line ’Cleaning’ with the menu buttons  
until you remove the cassette.  
B or A .  
Tracking during still picture  
d Press the OK button. ’CLEANING’ appears on the  
screen.  
If the still picture vibrates vertically, you can improve the still  
picture as follows:  
e Wait a few seconds, until the message disappears and  
then press the MENU button.  
a During still picture, press the MENU button.  
b Select the line ’Tape’ with the B button or A and  
confirm with the C button.  
c Select the line ’Jitter’ with the B or A button.  
d Hold the D or C button until the picture quality is at  
its best.  
e Confirm with the OK button.  
f To end, press the MENU button.  
DPlease note, however, that interference may still  
occur with poor quality cassettes.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. MANUAL RECORDING  
Use ’Manual Recording’ to make a spontaneous recording (for  
example, a programme currently being shown).  
Protecting your recordings  
E If you want to start and stop a recording manually, read  
So that you don’t accidentally delete an important recording,  
remove the special tab on the narrow side of the cassette with  
a screwdriver or slide the special tab to the left. Later, if you  
no longer want to protect your recording, you can seal the gap  
again with sticky tape or slide the special tab to the right.  
the section: ’Recording without automatic switch-off’.  
E If you want to start a recording manually but have it  
stopped automatically, read the section: ’Recording with  
automatic switch-off’.  
Auto-assembling  
Recording without automatic switch-off  
You can use the auto-assembling function to join individual  
recordings without any major picture disturbance between  
them.  
a Insert a cassette.  
b Use the qP r button to select the programme number  
you want to record, for example, ’P01’.  
a While the cassette is playing, search for the correct  
DProgramme number ’E1’ is provided for recording  
position on the tape.  
from external sources (via the EXT.1 scart socket).  
b Stop the cassette by pressing the STOP h button.  
c To start recording, press the RECORD/OTR n button on the  
remote control or 5 on the TV-VIDEO Combi.  
When you are recording, the red recording light at the  
front of the TV-VIDEO Combi will be alight.  
Pause’ will appear on the TV screen.  
c Now start recording as usual by pressing the  
RECORD/OTR n button on the remote control.  
d Stop recording with the STOP h button.  
DDuring a recording you can watch other TV  
Selecting the recording speed (SP or LP)  
channels.  
DTo switch off the screen, press the STANDBY m  
You can reduce the recording speed by half. This makes it  
possible to record, for example, eight-hours instead of  
four-hours on an ’E240’ (four-hour) cassette.  
button.  
a Press the MENU button. The main menu appears.  
Recording with automatic switch-off (OTR  
one-touch-recording)  
b Select the line ’Tape’ with the B or A button, and  
confirm with the C button.  
a Put a cassette in the machine.  
c Select the line ’Tape speed’ with the B or  
A
button.  
b Use the qP r button to select the programme number  
you want to record.  
d Select the required recording speed with the D or  
C button.  
c Press the RECORD/OTR n button on the remote control.  
When you are recording, the red recording light at the  
front of the TV-VIDEO Combi will be alight.  
DLP: Long Play = half recording speed (double  
recording time).  
SP: Standard Play = normal recording speed.  
d Press the RECORD/OTR n button again and again until the  
display on the TV-VIDEO Combi shows the desired end  
time or length of the recording.  
DThe picture quality will be adversely affected when  
recording at half recording speed (’LP’).  
DFor playback, the correct recording speed will  
DTo cancel this information, press the CLEAR e  
automatically be selected.  
button.  
e Confirm with the OK button.  
e Confirm with the OK button.  
f To end, press the MENU button.  
f To end, press the MENU button.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. PROGRAMMED RECORDING (TIMER)  
Use programmed recording to automatically start and stop a  
recording at a later date.  
c Enter the entire PlusCode-programming number (up to 9  
digits) printed in your TV guide next to the start time of a  
TV programme.  
To make a programmed recording, your TV-VIDEO Combi  
needs to know:  
For example, 5-234-89 or 5 234 89  
Enter 523489 for the PlusCode-programming number.  
If you make a mistake, you can clear your instructions  
with the CLEAR e button.  
* the date you want to make the recording;  
* the programme number for the TV channel you want to  
record;  
* the start and stop time of the recording;  
* whether you want to use VPS or PDC;  
* the recording speed (SP/LP).  
VIDEOPLUS  
CODE  
REPEAT  
The TV-VIDEO Combi stores all the information in a TIMER  
block. You can programme up to 6 TIMER blocks a month in  
advance.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
1
2
3
4
5
6(  
(
(
ONCE  
0-9  
Store:  
press OK  
’VPS’ (Video Programming System) and  
’PDC’ (Programme Delivery Control)  
d To programme daily or weekly recordings select the  
With ’VPS and PDC’, the TV station controls the start time and  
the length of the recording. This means that the TV-VIDEO  
Combi switches itself on and off at the right time even if a TV  
programme you want to record begins earlier or finishes later  
than expected.  
Usually the start time is the same as the VPS or PDC time. But  
if your TV guide gives a VPS or PDC time which is different to  
the programme’s start time (for example, 20.15 and VPS 20.14),  
you must enter ’20.14’ as the start time.  
column ’REPEAT’ with the C button.  
e Select the kind of programming required with the B or  
A button.  
Mo-Fr: recordings every day from Monday to Friday.  
Mo-So: recordings every day from Monday to Sunday.  
WEEKLY: recordings every week on the same day of  
the week.  
f Confirm with the OK button. Your programming details  
If you want to programme a time that is different from the VPS  
or PDC time, you must switch off VPS or PDC.  
will then appear on the TV screen.  
TIMER PROGRAMMING  
VPS  
Programming a recording (with ’VIDEOplus’)  
DATEPROG. START END LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
15 xxx  
15:36 15:50  
-
*
ONCE  
All the information required for a programming is contained in  
the PlusCode-programming number.  
ã
«
Exit:  
press TIMER  
Start:  
press è  
DIf VIDEOPlus+ does not recognise the TV channel,  
P??’ will appear on the TV screen. Instead of  
P??’, you can select the programme number you  
want with the number buttons 0-9 .  
a Press the TIMER s button on the remote control.  
b Select the line ’Videoplus’ with the menu buttons  
B or A and confirm with the C button.  
DIf ’Codeerror’ appears on the TV screen, this  
means you entered an incorrect PlusCode number  
or the incorrect date. Correct your instructions or  
end with the TIMER s button.  
DIf ’Daily error’ appears on the TV screen, the  
date was incorrectly entered.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUnder ’VPS/PDC’, use the B or A button to  
c Press the C button.  
switch ’VPS or PDC’ on or off.  
DUnder ’LP’, use the B or A button to select the  
TIMER PROGRAMMING  
VPS  
recording speed ’SP’ or ’LP’.  
DATEPROG. START END LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
DThe TIMER lamp on the front of the set lights up  
when one or more of the TIMER blocks are  
occupied.  
15 xxx  
15:36 15:50  
-
*
ONCE  
DWhen you are recording, the red recording light at  
the front of the TV-VIDEO Combi will be alight.  
ã
Exit:  
Start:  
press è  
«
press TIMER  
DIf the end of the cassette is reached during a  
recording, the TV-VIDEO Combi automatically ejects  
the cassette.  
d Select the entry field with the D or C button.  
DIf you forget to load a cassette, ’No cassette’  
will appear.  
e Enter information with the menu buttons B or A or  
with the digit buttons 0-9 .  
DIf you inserted a cassette with erase protection  
when you want to start a recording, the cassette will  
be ejected.  
DUnder ’REP.’, use the B or A button to select  
daily or weekly programming.  
Mo-Fr: Recording from Monday to Friday.  
Mo-So: Recording from Monday to Sunday.  
WEEKL: Recordings every week on the same day.  
g Press the OK button.  
h Confirm the message on the screen with the OK button.  
A TIMER recording can only start, if the set is not used for  
other video recorder functions (e.g. playback).  
DIf you want to make a TIMER-recordings from an  
external source, use the B or A button to select  
the setting ’Record prepared’ in the entry  
field ’PROG.’. Your TV-VIDEO Combi will now be  
controlled via the scart cable.  
i To end, press the TIMER s button.  
DUnder ’VPS/PDC’, use the B or A button to  
Programming a recording (without  
’VIDEOPlus’)  
switch ’VPS or PDC’ on or off.  
DUnder ’LP’, use the B or A button to select the  
recording speed ’SP’ or ’LP’.  
a Press the TIMER s button on the remote control.  
f Confirm with the OK button when the information is  
b Select the line ’Timer programming’ with the  
correct.  
menu buttons B or A and confirm with the  
C
g Confirm the message on the screen with the OK button.  
A TIMER recording can only start, if the set is not used for  
other video recorder functions (e.g. playback).  
button.  
TIMER PROGRAMMING  
DThe programming information has been stored in a  
VPS  
DATEPROG. START END LP PDC REP.  
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  
TIMER block.  
-- --  
--:-- --:--  
-
-
-----  
h To end, press the TIMER s button.  
i Make sure that the cassette you have put in can be  
recorded on.  
ã
«
Exit:  
press TIMER  
Start:  
press è  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to check or change a TIMER  
How to clear a TIMER  
a Press the TIMER s button on the remote control.  
a Press the TIMER s button on the remote control.  
b Select the line ’Timer programming’ with the  
b Select the line ’Timer programming’ with the  
menu buttons B or A and confirm with the  
C
menu buttons B or A and confirm with the  
C
button.  
button.  
c Select the TIMER you want to check or change with the  
c Select the TIMER you want to clear with the menu  
B or A button and confirm with the OK button.  
buttons B or A .  
d Select the entry field with the D or C button.  
d Press the CLEAR e button.  
e Change any information with the B or A button or  
e Switch off with the TIMER s button.  
with the 0-9 buttons.  
DUnder ’LP’, use the B or A button to select the  
recording speed ’SP’ or ’LP’.  
f Confirm with the OK button.  
g To end, press the TIMER s button.  
h Make sure that the cassette you have put in can be  
recorded on.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. ADDITIONAL FUNCTIONS  
b Select the line ’Tape’ with the B or A button and  
How to read TELETEXT  
confirm with the C button.  
E Press the TELETEXT e button to switch the TXT decoder  
on and off. The TV-VIDEO Combi is now receiving the TXT  
of the TV channel currently selected.  
TAPE  
E To store the current page, press the OK button.  
The next time you call up TELETEXT, you will  
automatically turn to this page.  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
USED  
OFF  
AUTO  
N. ACT.  
Tracking  
Cleaning  
(,,,,,,,,=,,,,,,$  
E If you want to select an other page, type in the number of  
the page with the digit buttons 0-9 . With the colour  
buttons on your remote control you can directly select  
the page numbers/chapters shown at the bottom of the  
TV screen.  
ã
«
Exit:  
press MENU  
c In the line ’Video system’ select the required TV  
Extra TELETEXT functions  
system with the menu buttons D or C .  
To use the extra TELETEXT functions, press the MENU button,  
when you are in TELETEXT.  
d Confirm with the OK button.  
e To end, press the MENU button.  
E To enlarge the print, select the symbol ’g’ and confirm  
with the OK button.  
E To switch off the TELETEXT decoder temporarily, select  
Parental control  
the symbol ’d’ and confirm with the OK button.  
E To call up a TELETEXT sub-page:  
This function will prevent unauthorised use of your TV-VIDEO  
Combi. All button-functions will be locked.  
a Select the symbol ’}’ and confirm with the OK  
button.  
DYou can make programmed recordings while the parental  
control is on.  
b Enter the page number of the sub-page with the  
0-9 -buttons (e.g.: 0123).  
a Press the MENU button. The main menu appears.  
E To call up concealed information, select the symbol ’b’  
and confirm with the OK button.  
b Select the line ’Setup’ with the B or A button and  
confirm with the C button.  
E To stop the pages from being turned over, select the  
symbol ’f’ and confirm with the OK button.  
E To show TELETEXT transparently, select the symbol ’-’  
and confirm with the OK button.  
SETUP  
Parental control  
Format 16:9  
Sound only  
VCR 1/2  
OFF  
Display  
MAX  
Changing the TV system  
NORMAL  
OFF  
VCR  
1
If you play back recordings made on a different kind of tape  
(for example, NTSC standard), the automatic TV system  
switch-over may lead to colour interferences. You can switch  
off the ’automatic TV system switch-over’ as follows.  
ã
Exit:  
«
press MENU  
c In the line ’Parental control’ select ’ON’ with  
a Press the MENU button. The main menu appears.  
the D or C button.  
d Confirm with the OK button.  
e To end, press the MENU button.  
Keep the remote control in a safe place.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
f If you want to switch off the parental control, select  
Switching to 16:9 wide screen picture  
OFF’ in line ’Parental control’.  
DIf a button is pressed with activated parental  
control, ’Parental Control activ’ will  
appear.  
If you are using a cassette with 16:9 wide screen recordings,  
you can switch this function ’ON’. The TV-VIDEO Combi will  
now automatically switch to wide screen.  
DIf you want to eject a cassette with activated  
parental control, press the STOP h button several  
seconds.  
a Press the MENU button. The main menu appears.  
b Select the line ’Setup’ with the B or A button and  
confirm with the C button.  
Switching the On-screen display (OSD) on  
or off  
SETUP  
You can switch the On Screen Display of the current operating  
information on or off.  
Parental control  
Format 16:9  
Sound only  
VCR 1/2  
OFF  
Display  
MAX  
NORMAL  
OFF  
VCR  
1
a Press the MENU button. The main menu appears.  
ã
«
Exit:  
press MENU  
b Select the line ’Setup’ with the menu buttons B or  
A and confirm with the C button.  
c Select the line ’Format 16:9’ with the A or  
B
button.  
SETUP  
d Select one of the possibilities with the C or D button.  
NORMAL: Normal size picture.  
Parental control  
OFF  
Display  
MAX  
EXTEND.: Extended size picture.  
COMPR.: 16:9 format picture.  
Format 16:9  
Sound only  
VCR 1/2  
NORMAL  
OFF  
VCR  
1
DWhen you watch TV you can select between  
ã
«
Exit:  
press MENU  
EXTEND.’ and ’NORMAL’.  
e Confirm with the OK button.  
c Select the line ’Display’ with the menu buttons  
B
f To end, press the MENU button.  
or A .  
d Select one of the options indicated with the menu buttons  
C or D .  
MAX: The OSD appears for a few seconds each time an  
operating mode is selected and then disappears.  
MIN: The OSD is reduced to a minimum.  
PROGR.: The programme number is always shown.  
COUNTER: The tape position is always shown.  
e Confirm with the OK button.  
f To end, press the MENU button.  
DWith the OK button you can superimpose the On  
Screen Display of current operating mode on the TV  
screen.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the remote control command  
Continuous playback  
If you have two machines with the same remote control  
You can automatically play a cassette again and again. When  
command, you can change the remote control command of the the end of the tape or the recording has been reached, it will  
handset and the remote control command of your TV-VIDEO  
Combi.  
rewind and start again.  
a Press the MENU button. The main menu appears.  
a Press the MENU button. The main menu appears.  
b Select the line ’Tape’ with the menu buttons B or  
b Select the line ’Setup’ with the menu buttons B or  
A . Confirm with the menu buton C .  
A and confirm with the menu button C .  
TAPE  
Tape speed  
Tape counter  
Repeat play  
Video system  
Jitter  
SP  
SETUP  
USED  
OFF  
AUTO  
Parental control  
Format 16:9  
Sound only  
VCR 1/2  
OFF  
N. ACT.  
Display  
MAX  
Tracking  
Cleaning  
(,,,,,,,,=,,,,,,$  
NORMAL  
OFF  
VCR  
1
ã
«
Exit:  
press MENU  
ã
«
Exit:  
press MENU  
c Select the line ’Repeat play’ with the menu buttons  
c Select the line ’VCR1/2’ with the menu buttons B or  
B or A .  
A .  
d Select ’ON’ with the menu buttons D or C . If you  
d Select ’VCR1’ or ’VCR2’ with the menu buttons D or  
select ’OFF’, the function will be switched off.  
C
e Confirm with the OK button.  
e Confirm with the OK button.  
f Press the MENU button.  
f On the remote control, press the STOP h button and the  
digit button 2 at the same time to switch the remote  
control to ’VCR2’.  
DIf you want to switch back to ’VCR1, press the  
STOP h button and the digit button 1 at the same  
time.  
g Confirm with the STOP h button.  
DIf the menu does not disappear, the TV-VIDEO Combi  
didn’t recognise the remote control command.  
Repeat step g .  
DAfter you changed the batteries in the remote  
control, it will switch back to ’VCR1’.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound playback without picture  
Switch on function (WAKE-UP TIMER)  
To play sound only when you watch TV or when you playback  
You can programme your set to switch on at a predetermined  
a cassette, you can switch off the picture. You will hear sound time.  
only.  
a Press the TIMER s button on the remote control.  
a Press the MENU button. The main menu appears.  
b Select line ’Wake-up timer’ with the B or  
A
b Select the line ’Setup’ with the menu buttons B or  
button and confirm with the C button.  
A and confirm with the C button.  
c Select the entry field with the D or C button.  
d Enter the information with the B or A button or with  
the number buttons 0-9 .  
SETUP  
e In the line ’ON’, switch the function on or off.  
f Press the OK button.  
Parental control  
Format 16:9  
Sound only  
VCR 1/2  
OFF  
Display  
MAX  
NORMAL  
OFF  
VCR  
1
g To end, press the TIMER s button.  
ã
«
Exit:  
press MENU  
c In the menu ’Setup’, select the line ’Sound only’.  
d Switch the function on or off with the D or C button.  
e Confirm with the OK button.  
f Press the MENU button.  
Switch off function (SLEEP TIMER)  
You can programme your set to switch off after a  
predetermined period.  
a Press the TIMER s button on the remote control.  
b Select line ’Sleep timer’ with the B or  
A
button and confirm with the C button.  
c Determine the time left until switch off in 15 minutes  
intervals using the B or A button.  
DYou can switch the function off with the  
CLEAR e button on the remote control.  
d Confirm with the OK button.  
e To end, press the TIMER s button.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Before you call an engineer  
If, contrary to expectation, you have any problems using this  
TV-VIDEO Combi, it may be caused by one of the reasons  
mentioned below. You can also call the customer service  
centrein your country.  
You will find the phone number in the enclosed guarantee  
leaflet.  
’Smart Clock’ setting does not work:  
You have stored a TV channel on programme number ’P01’ that  
does not transmit TELETEXT: On ’P01’ store a TV channel that  
transmits TELETEXT.  
Poor TELETEXT reception: On ’P01’ store a TV channel with  
good TELETEXT reception.  
You have not activated the Smart Clock function: Switch the  
function ’ON’.  
Your TV-VIDEO Combi does not respond to any button being  
pressed:  
You hear a very short and soft noise coming from your  
TV-VIDEO Combi at 3:00 at night:  
There is no power supply: check the power supply  
A programmed recording is currently being made: cancel the  
programmed recording with the STANDBY m button.  
Parental control is on: switch the parental control off.  
Continuous playback is on: switch the continuous playback off.  
There is a technical problem: switch off with the 8 power  
switch for 30 seconds, then switch it on again.  
’Smart Clock’ is checking the time: Switch off the Smart Clock  
function.  
TELETEXT does not start at page 100:  
You have stored a different preferred page: Store page 100 as  
preferred page.  
Cassette is jammed in the TV-VIDEO Combi:  
Don’t use force. Switch off with the 8 power switch for a  
Technical terms used  
moment.  
Remote control does not work:  
Current tape position : The part of the tape currently being  
played.  
Remote control not pointed toward the TV-VIDEO Combi: point it  
at the TV-VIDEO Combi.  
External source : A device connected via a socket (for  
example, scart socket) which is transmitting audio/video  
signals to the TV-VIDEO Combi.  
Index marking : A marking which is automatically made on the  
tape at the beginning of every recording. This marking  
(recording ID) can be searched for with the Index search  
function.  
Batteries have run out: change the batteries.  
You have given the wrong remote control command: read  
’Switching remote control command’ in chapter ’Additional  
functions’.  
No picture when you play a cassette:  
There is no recording on the cassette: change the cassette.  
Poor picture quality when you play a cassette:  
Scart cable : Also known as a Euro-AV cable. This standard  
cable is an easy method of connecting various TV, audio and  
video devices, such as a HIFI and Dolby Surround set, video  
recorder, DVD player, SAT receiver, decoder, computer and  
similar devices. Other signals in addition to audio and video  
signals can be transmitted on it.  
TV system : There are various systems for transmitting  
television signals, for example, PAL, SECAM, PAL BG, SECAM  
DK, SECAM L/L, NTSC etc. The system used by your television  
depends on which country you are in.  
The cassette badly worn or of poor quality: use new cassette.  
Tracking is not properly adjusted or the video heads are dirty:  
turn to chapter ’PLAYBACK’ and read the section ’Eliminating  
picture interference’.  
You are playing a cassette with a LongPlay recording on it:  
Excellent picture quality is only guarateed with recordings made  
in StandardPlay recording speed.  
The TV-VIDEO Combi will not record:  
The TV channel you want to record is not stored or you selected  
the wrong programme number: check TV channels stored.  
You have loaded a cassette which cannot be recorded on: undo  
the erase protection on the cassette.  
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.  
OTR : One touch recording. This function enables you to select  
the switch-off time in intervals of 30 minutes.  
Programmed recording does not work:  
You have not set the TIMER properly: check the TIMER blocks.  
You have programmed the wrong time or date: check time and  
date.  
You have put in a cassette that cannot be recorded on: undo the  
erase protection on the cassette.  
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC  
or VPS time exactly to the minute. Have the aerial checked.  
Recording starts as soon as the satellite receiver or second  
video recorder is switched on:  
Externally controlled recording switched on: Switch off the  
externally controlled recording.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Paxar Printer 656 636 User Manual
Peavey Musical Instrument Amplifier Vintage User Manual
Pentax Digital Camera Optio SV User Manual
Philips Clock Radio AJ210 12 User Manual
Philips Iron GC7330 User Manual
Philips TV Mount HP6335 User Manual
Pitco Frialator Fryer SE14 User Manual
Pitney Bowes Scale G799 User Manual
Poulan Snow Blower 435356 User Manual
Poulan Trimmer TE450 LE User Manual