FW-D550
DVD Mini Hi-Fi System
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 48
Español --------------------------------------------- 90
----------------------------------------------- 132
CAUTION
Use of controls or adjustment or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information/
Maintenance
Features .................................................................. 8
Discs for playback ................................................ 8
Region codes
Supplied accessories ............................................ 8
Environmental information ................................ 9
Care and safety information .............................. 9
Disc Operations
Playing discs ......................................................... 22
Using the disc menu .......................................... 22
Basic playback controls ..................................... 23
Skipping to another title (track)/chapter
Fast search
Continuing playback from the last stop point
Selecting various mode functions ............ 23~24
Repeat play mode
Shuffle play mode
Connections
Step 1: Placing speakers .................................... 10
Repeating a section within a chapter/track
Programing favorite tracks ............................... 24
Step 2: Connecting speakers............................ 10
Step 3: ConnectingTV set ......................... 11~12
UsingVideo In jack (CVBS)
Using ComponentVideo In jack (Pr PbY)
Using S-Video In jack
Using an accessory RF modulator
Step 4: Connecting FM/MW antennas ........... 13
Step 5: Connecting the power cord............... 13
Connecting aVCR or cable/satellite box ...... 14
Connecting digital audio equipment .............. 14
Using the menu bar to program ..................... 24
Changing discs during playback ....................... 25
Special DVD/VCD features ....................... 25~27
Changing subtitle language
Changing sound track language
Playing in slow motion mode
Searching for a particular passage
Displaying the disc information during playback
Moving to another title (track) / chapter
Playing from a selected point
Zooming in
Viewing from another angle
Advancing by frames
Checking the contents of DVD
SpecialVCD/SVCD features ............................ 27
Playback control (PBC)
Functional Overview
Controls on the system ............................. 15~16
Remote control .................................................. 17
Basic Functions
Plug and Play (for tuner installation) .............. 18
Demonstration mode........................................ 18
MP3 / Picture Disc Operations
Playing MP3/picture disc (Kodak, JPEG) ........ 28
DVD Menu Operations
Using the menu bar ........................................... 29
Using the setup menu ................................ 30~33
Setting theTV shape
Setting the video out
Setting the screen saver
Preparations
Step 1: Inserting batteries into the remote
control .................................................................. 19
Step 2: Setting the clock ................................... 19
Step 3: Setting theTV set ................................. 20
Step 4: Setting speakers .................................... 21
Step 5: Setting language preference ................ 21
Setting the digital output
Setting the PCM output
Night mode - turning on/off
Changing the password
Restricting playback by setting parental level
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Tuner Operations
Tuning to radio stations .................................... 34
Presetting radio stations ............................ 34~35
Automatic preset programming
Manual preset programming
Selecting a preset radio station....................... 35
Deleting a preset radio station
Changing tuning grid .......................................... 35
Tape Operation/Recording
Tape playback ...................................................... 36
General information on recording ................. 36
Preparation for recording ................................ 37
Disc synchro recording..................................... 37
Dubbing tapes ..................................................... 37
Clock/Timer Operations
Viewing clock ...................................................... 38
Setting the timer................................................. 38
Setting the sleep timer ...................................... 39
Sound andVolume Controls
Sound control ..................................................... 40
Selecting surround sound
MAX sound
Selecting sound effect
Volume control ................................................... 41
Changing the volume level
Switching off the volume temporarily
Listening through headphones
Other Functions
Switching on/off .................................................. 42
Switching the system on
Switching the system to standby mode
Switching to eco power standby mode
Power saving automatic standby
Dimming the display .......................................... 42
Vocal ...................................................................... 42
Key control .......................................................... 43
Echo....................................................................... 43
Karaoke ................................................................ 43
Listening to external sources .......................... 43
Specifications ........................................... 44
Troubleshooting ............................. 45~46
Glossary......................................................... 47
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
– Following formats can’t be supported
Features
•
The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV, *.WMA
Your DVD Mini Hi-Fi System with 2-channel full
digital amplifier creates the same dynamic sound
qualities that you find in full-fledged cinemas and
incorporates some of the best features in home
theater technology.
•
•
•
Non-English Album/Title name
The discs recorded under Joliet format
MP3 Pro and MP3 with ID3 tag
Other features include:
Built-in DTS and Dolby Digital decoder,
supporting virtual surround and stereo.
Additional Component Connections
Lets you connect other audio and audio/visual
components to the system so you can use the
system’s surround sound speakers.
Region codes
Night mode
DVDs must be labeled for ALL regions or for
Region 3 in order to play on this system.You
cannot play discs that are labeled for other
regions.
Lets you compress the dynamic range, reducing
the difference in loudness between different
sounds in Dolby Digital mode.
Parental control (rating level)
Lets you set a rating level so that your children
cannot watch a DVD that has a rating higher
than you set.
Notes:
Sleep timer
– For mixed mode discs, only one mode will be
selected for playback according to the recording
format.
Enables the system to switch to standby mode
automatically at a preset time.
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improperly
formatted discs will not play on this system.
Discs for playback
Your DVD Mini Hi-Fi System will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
Supplied accessories
– DigitalVideo Discs + Rewritable (DVD+RW)
– Compact Discs (CDs)
– Picture (Kodak, JPEG) files on CDR(W)
– Supported MP3-CD format.
– Composite video cable (yellow)
– Component video cables
(red/blue/green)
•
•
•
•
•
•
•
ISO 9660 / UDF format
– Audio cables (white, red)
Max. title/album name –12 characters
Max. title number plus album is 255.
Max. nested directory is 8 levels.
The max. album number is 32.
The max. MP3 track number is 999.
Supported sampling frequencies for MP3 disc:
32 kHz, 44.1 kHz, 48 kHz.
– FM wire antenna
– MW loop antenna
•
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
– Remote Control and
two AA batteries
– AC power cable
– This instruction booklet and a Quick Use Guide
8
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information/Maintenance
●
The ventilation should not be impeded by
covering the ventilation openings with items, such
as newspapers table-cloths, curtains, etc.
Environmental information
Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Cleaning the cabinet
Use soft cloth slightly moistened
with a mild detergent solution.
Do not use a solution containing
alcohol, spirits, ammonia or
abrasives.
●
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Cleaning discs
To clean a CD, wipe it in a
●
straight line from the center towards the edge
using soft and lint-free cloth.A cleaning agent
may damage the disc.
Write only on the printed side of a CDR(W)
and only with a soft felt-tipped pen.
Handle the disc by its edge. Do not touch the
surface.
Care and safety information
●
●
Avoid high temperatures, moisture,
water and dust
●
Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight).Always
keep disc trays closed to avoid dust buildup on
the lens.
Cleaning the disc lens
●
After prolonged use, dirt or dust may accumulate
at the disc lens.To ensure good playback quality,
clean the disc lens with Philips CD Lens Cleaner
or any commercially available cleaner. Follow the
instructions supplied with cleaner.
●
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Finding a suitable location
●
●
Place the player on a flat, hard, stable surface.
Avoid condensation problem
Cleaning the head and the tape paths
To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of tape
operation.
●
The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
●
●
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the head by playing a cleaning
tape once.
Do not block the vents
●
Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free
space all around the player for adequate
ventilation.
10 cm
(4 inches)
C
B
A
B
C
Demagnetising the head
Use a demagnetising tape available at your dealer.
10 cm
(4 inches)
10 cm
(4 inches)
DVD Mini Hi-Fi System
●
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1: Placing speakers
Step 2: Connecting speakers
DIN OUT
Center speaker
Front
SUBWOOFER
OUT
Front
speaker
( left )
speaker
( right )
speaker
(right)
speaker
(left)
SPEAKERS
4
VIEWING AREA
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to “R” and left
speaker to “L”, coloured (marked) wire to “+”
and black (unmarked) wire to “–”. Fully insert
the stripped portion of the speaker wire into the
terminal as shown.
Speakers
Front Left (L)
–
+
Place the front left and right speakers at equal
distances from theTV set and at an angle of
approximately 45 degrees from the listening
position.
Black
Black
White
Front Right (R)
Red
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to yourTV set.
– Allow adequate ventilation around the DVD Mini
Hi-Fi System.
IMPORTANT!
The type plate is located on the rear of
the system.
To avoid overheating of the system, a
safety circuit has been built in.
Therefore, your system may switch to
Standby mode automatically under
extreme conditions. If this happens, let
the system cool down before reusing it.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 3: ConnectingTV set
Television
Y
D
(
D
D
U
U
(
U
(CVBS)
NE
OUT
AUX/
TV
IN
IMPORTANT!
IMPORTANT!
– If both S-Video and Component (Pr
PbY)Video connections are used to
connect to yourTV set, theVideo signal
will automatically switch to S-Video
when you power up the system.To set
theVIDEO OUT (put) to ‘Pr PbY’, see
page 31, Using the Setup Menu – Setting
the video out.
– You only need to make one video
connection from the following options,
according to the capabilities of yourTV
system.
– S-Video or ComponentVideo
connection provides higher picture
quality.These options must be available
on yourTV set.
– Connect the system directly to theTV
set.
Using componentVideo In jack
(Pr PbY)
Use the component video cables (red/blue/
green) to connect the system’s Pr PbY jacks to
the corresponding Component video input jacks
(or labeled as Pr/Cr Pb/CbY orYUV) on theTV
set.
To listen toTV channels through this system, use
the audio cables (white/red) to connect AUX/
TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on theTV set.
UsingVideo In jack (CVBS)
●
●
●
●
Use the composite video cable (yellow) to
connect the system’s CVBS jack to the video
input jack (or labeled as A/V In,Video In,
Composite or Baseband) on theTV set.
To listen toTV channels through this system, use
the audio cables (white/red) to connect AUX/
TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on theTV set.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
RF coaxial cable toTV
Television
INT IN TO TV
AUDIO IN
VIDEO
IN
R L
CH3 CH4
Y
Antenna or
CableTV signal
Back of RF Modulator
(example only)
P
D
(
D
D
U
U
U
(CVBS)
P
D
(
D
D
U
U
(
U
(C
INE
UT
AUX/
TV
LINE
OUT
IN
IMPORTANT!
IMPORTANT!
– If yourTV set only has a single
– If the picture is distorted, check the
Video Output setting. Make sure it is set
to ‘S-Video’. See page 31, Using the Setup
Menu – Setting the video out.
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback viaTV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using S-Video In jack
●
●
Use the S-Video cable (not supplied) to connect
the system’s S-VIDEO OUT jack to the S-
Video input jack (or labeled asY/C or S-VHS) on
theTV set.
Using an accessory RF
modulator
To listen toTV channels through this system, use
the audio cables (white/red) to connect AUX/
TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on theTV set.
●
●
Use the composite cable (yellow) to connect the
system’s CVBS jack to the video input jack on
the RF modulator.
Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s RF jack.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 4: Connecting FM/MW
antennas
Step 5: Connecting the power
cord
FM
MW
antenna
DIN OUT
antenna
SUBWOOFER
OUT
fix the claw
into the slot
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
MW ANTENNA
FM ANTENNA
AUDIO
OUT
~
AC MAINS
Pb/Cb
Y
VIDEO IN
DIN OUT
Power Outlet
●
●
Connect the supplied MW loop antenna to the
MW jack. Place the MW loop antenna on a
shelf or attach it to a stand or wall.
Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its end to
the wall.
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
On the DVD Mini Hi-Fi System
“AUTO INSTALL-PRESS PLAY” may appear
on the display panel. Press 2;on the front panel
to search and store all available radio stations or
press 9 to exit (See page 35,Tuner Operations-
Presetting radio stations).
VOLTAGE
If your system is equipped with aVoltage
SELECTOR
110V-
127V
Selector, set theVOLTAGE SELECTOR
to the local power line voltage.
220V-
240V
MW ANTENNA
FM ANTENNA
NOT FOR ALL
VERSIONS
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
yourTV set,VCR or other radiation sources to
prevent unwanted interference.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting aVCR or
cable/satellite box
Connecting digital audio
equipment
P
D
(
D
D
U
U
(
U
(CVBS)
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
LINE
OUT
Pb/Cb
Y
VIDEO IN
AUX/
TV
IN
1
ANT IN
TO TV
VCR or
Cable/Satellite
Box
DIGITAL IN
3
P
D
(
D
D
U
U
(
U
(CVBS)
3
LINE
OUT
4
2
AUX/
TV
IN
Recording (digital)
Connect the system’s DIGITAL OUT jack to the
DIGITAL IN jack on a digital recording device
(DTS-DigitalTheater System compatible, with a
Dolby Digital decoder, for example).
Viewing and listening to playback
1 Connect theVCR or Cable/Satellite Box to the
TV system as shown.
2 Connect the system’s AUX/TV IN (R/L) jacks to
the AUDIO OUT jacks on theVCR or Cable/
Satellite box.
Before operation, set the DIGITAL OUTPUT
according to the audio connection. (See page 31,
Using the Setup Menu – Setting the digital
output).
Before starting operation, press AUX/TV on
the remote control to select “AUX” in order to
activate the input source.
Using theVCR for recording
DVDs
Some DVDs are copy-protected.You cannot
record or dub protected discs using aVCR.
3 Connect the system’s CVBS jack to theVIDEO
IN jack on theVCR.
4 Connect the system’s LINE OUT (R/L) jacks
to the AUDIO IN jacks on theVCR.This will
allow you to make analog stereo (two channel,
right and left) recording.
To view DVD playback while recording
You must connect the system to yourTV system
using the S-VIDEO (as shown above) or the
Component (Pr PbY) video connection.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
^ SOUND
Controls on the system
–
to activate or deactivate the surround sound
effect.
1 ECO POWER
–
to switch the system on or to Eco Power
Standby mode.
& MAX SOUND (MAX)
–
to activate or deactivate the optimal mix of
various sound features.
2 STANDBY ON2
to switch the system on or to Standby mode.
3 DISPLAY SCREEN
to view the current status of the system.
–
* MIC/LEVEL
–
–
to connect microphone jack.
to adjust the mixing level for karaoke or
microphone recording.
–
4 DISCTRAYS
5 DISC CHANGE
( 0
–
to change disc(s).
6 DISC 1 / DISC 2 / DISC 3
to select a disc tray for playback.
7 OPEN•CLOSE
to open or close the disc tray.
8 INTERACTIVEVU METER
–
to open the tape deck door.
) TAPE DECK 1
¡ TAPE DECK 2
™ SOURCE
–
–
–
–
–
–
–
to select the following:
DISC (DISC 1•2•3)
to select disc tray 1, 2 or 3
–
to show theVU (volume unit) meter in music or
volume mode depending on the display mode
selected.
TUNER (BAND)
to select waveband: FM or MW.
TAPE (TAPE 1-2)
9 SENSOR
–
point the remote control towards this sensor.
to select tape deck 1 or 2.
0 VOLUME
AUX/TV
–
to increase or decrease the volume.
to select a connected external source:TV/CDR
or AUX (auxiliary) mode.
! Tape Deck Operation
AUTO REPLAY
£ Mode Selection
–
to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
PLAY/PAUSE 38
for DISC .................... to start or interrupt playback.
forTAPE..................... to start playback.
for PLUG&PLAY ... (on the system only) to initiate
plug & play mode.
–
–
to dub a tape.
REC
to start recording on tape deck 2.
SEARCH•TUNING 1 ¡
(ALBUM – / +)
for DISC .................... to search backward/forward.
forTAPE..................... to rewind or fast forward.
forTUNER ............... to tune to a lower or higher
radio frequency.
@ VOCAL
to fade out the original vocal from Karaoke or to
–
switch between mono or stereo mode during
audio disc playback.
# JOG CONTROL
for CLOCK .............. (in standby mode)to set the
minute and hour.
–
to select the desired sound effect for the
selected sound feature.
DEMO STOP/CLEAR 7
$ KEY CONTROL
for DISC .................... to stop playback or to clear a
programme.
–
to change the tone level to suit your vocal range.
I .................to decrease the key tone level.
.................to restore the key tone level to
original setting.
for DEMO ................ (in Standby or ECO power
mode) to activate/deactivate
demonstration.
for PLUG&PLAY ... (on the system only) to exit
plug&play mode.
i .................to increase the key tone level.
% ECHO
to adjust the echo level for karaoke after
inserting the microphone.
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
PREV / PRESET / NEXT O P
(TITLE – / +)
for DISC .................... to select previous/next title,
chapter and track during
playback.
forTUNER ............... to select a preset radio
station.
for CLOCK .............. (on the system only) to set the
minute.
≤ ;
–
to connect headphones.
∞ SUBTITLE
to select the preferred language for subtitle.
§ LANGUAGE
–
–
to select the preferred language for audio
recorded.
≥ PROGRAM
for DISC .................... to programme disc tracks.
forTUNER ............... to programme preset radio
stations.
• DISPLAY
–
to view the time, title or chapter information.
ª CLOCK
–
to view the clock, set the clock.
º TIMER
–
to set the timer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
5 4/ ¢
Remote control
–
–
–
in Disc mode, press to skip to the previous/next
chapter/track.
in Disc mode, press and hold to fast reverse/
forward the disc.
inTuner mode, to tune to a lower or higher
radio frequency.
6 PLAY/PAUSE 2;
to start or interrupt disc playback.
7 STOP 9
–
–
to stop playing the disc.
8 SURROUND
–
to select multichannel surround (Dolby Digital,
DTS andVSS) or stereo sound effect.
9 SOUND
to select various sound effect: CONCERT,
–
DRAMA,ACTION,SCI-FI, CLASSIC, JAZZ,
ROCK, DIGITAL, MAX ON or MAX OFF.
0 MODE
–
to select the REPEAT or SHUFFLE function.
! REPEAT A-B
–
to repeat a specific section on a disc.
@ POWER 2
to switch to standby mode.
# Numeric Keypad (0-9)
–
–
–
to enter a track/title number of the disc.
to enter a number of preset radio stations.
$ VOL +/-
–
adjust the volume level.
Notes:
% OK
–
^ RESUME
–
& MUTE
–
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC orTUNER, for example).
– Then select the desired function (2, 4, ¢
for example).
to exit or confirm the selection.
to continue disc playback after interruption.
to interrupt or resume sound reproduction.
* NIGHT (Dolby Digital mode only)
1 SOURCE
–
to optimize the dynamic effect of the sound
output.
–
to select the relevant active mode:TAPE, DISC,
TUNER or AUX/TV.
( DIM
–
–
TUNER: toggles between FM and MW band.
AUX/TV: toggles between AUX-ANA and AUX-
DIG(Digital Input) mode.
–
to select different brightness for the display.
) SLEEP
2 DISC MENU (disc mode only)
to enter or exit the disc contents menu.
3 SYSTEM MENU (disc mode only)
to enter or exit the system menu bar.
4 3 / 4 / 1 / 2
–
to set the sleep (auto-off) timer function.
–
¡ SUBW +/-(for subwoofer connection only)
–
–
–
–
to adjust the subwoofer’s level.
–
REAR +/-(for 5.1 speaker connection only)
to adjust the rear speakers’ level.
CENTER +/-(for 5.1 speaker connection only)
to adjust the center speaker’s level.
TVVOL+/-
–
inTuner mode, to select a preset radio station
number ( 1or 2).
–
to select movement direction in disc contents
menu/system menu bar.
to adjust Philips’ television volume level.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Plug and Play (for tuner
Demonstration mode
The system has a demonstration mode that
shows various features offered by the system.
installation)
Plug and play allows you to store all available
radio stations automatically.
Activating demonstration
●
●
In Standby or ECO power mode, press and hold
DEMO/STOP 7for more than 5 seconds to
activate demo mode.
➜ “DEMO ON” is displayed.
➜ Demonstration will begin.
If plug and play has not been installed
When you turn on the system,“AUTO
INSTALL- PRESS PLAY” will be displayed.
1
2
Press 38on the system to start installation.
➜ “INSTALL” will be displayed and followed by
“TUNER” and then “AUTO”.
Deactivating demonstration
Press and hold DEMO STOP 7on the system
until “DEMO OFF” is displayed.
➜ PROG will start to flash.
➜ The system will search all radio stations on
the FM band, and then the MW band.
➜ All available radio stations with strong signal
strength will be stored automatically.
➜ The system will switch to Standby mode.
Note:
➜ The system will stop searching when all
available radio stations are stored or when the
memory for 40 preset radio stations is full.
➜ The first preset radio station will play when
Plug and Play is completed.
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
Reinstalling plug and play
1
2
In Standby or Demonstration mode, press and
hold 38 on the system until“AUTO
INSTALL-PRESS PLAY” is displayed.
Press 38again to start installation.
➜ All previously stored radio stations will be
replaced.
To exit without storing the plug and play
●
Press 7on the system.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If Plug and Play installation is not completed, it
will be reinitiated the next time you power on the
system.
– If there is no antenna connected,“CHECK
ANTENNA” will scroll on the display.
– If auto-install is not preset, the system will store
the radio station automatically.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
IMPORTANT!
Step 2: Setting the clock
The clock can be set in either 12-hour or 24-
hour mode (“PM 00:00” or “00:00” for
example).
– Make sure to complete the
preparation procedures before operating
the system.
Step 1: Inserting batteries into
the remote control
1
2
Go into Standby mode.
➜ If you have not set the clock,“--:--” will blink
until you set the clock.
3
1
2
Press CLOCK and “00:00” blinks on the
display.
➜ The current time is flashing on the display.
➜ If you have not set the clock,“--:--” will appear
on the display.
1 Open the battery compartment.
2 Place two batteries (Type R06 or AA) in the
compartment with the correct polarity as
indicated by “+” and “–” symbols.
3 Close the cover.
3
4
5
Press Oor Pon the system to set the hours.
Press 5or 6on the system to set the minutes.
Using the remote control to
operate the system
Press CLOCK to confirm your setting, and then
go into standby mode.The system will store the
setting automatically.
1
2
Point the remote control directly
at the remote sensor (iR) on the
front panel.
➜ The time setting becomes effective.
TAPE 1/2
To exit the setting without storing
Press 9 on the system to exit.
➜ “CANCEL” will appear on the display.
Press ECO POWER to exit setting mode and
go into ECO POWER mode.
You can also press DISC, DISC1~3, DISC
CHANGE, OPEN/CLOSE to exit setting
mode and go into disc mode.
Select the source you wish to
control by pressing one of the
source select buttons on the
remote control (for example
TAPE,TUNER).
●
●
●
3
Then select the desired function (for example
2;, 4, ¢).
●
●
The system will also exit setting mode and go to
tuner,AUX, tape mode wheh you press the
corresponding source button.
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
Viewing the clock
In Standby mode, press DISPLAY on the
system to toggle between 12-hour and 24-hour
modes.
➜ The time will be displayed.
Notes:
– The clock will be cancelled when the power cord
is disconnected or if a power failure occurs.
– During clock setting, if no button is pressed
within 30 seconds, the system will exit the setting
mode and go into standby mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
1
In disc mode, stop playback and press SYSTEM
MENU.
Step 3: Setting theTV set
IMPORTANT!
2
3
Select
icon and press 4.
– Make sure you have completed all the
necessary connections. (See page 11-12,
Connections – ConnectingTV set)
Press 1 / 2 / 3 / 4keys on the remote
control to toggle through the functions and
select your preferred option.
1
2
Press DISC (DISC 1•2•3) on the front panel
(or press DISC on the remote control).
➜ Move to
➜ Move to “TV System” and press 2.
and press 2.
Turn on theTV set and set to the correctVideo-
In channel.You should see the blue Philips DVD
background screen on theTV set.
➜ You may go to channel 1 on yourTV set, then
press the channel down button repeatedly until
you see theVideo In channel.
AUTO
– Select this if the connectedTV set is
compatible with both NTSC and PAL (multi
system).The output format will be consistent
with the video signal of the disc.
➜ Or, you can use theTV remote control to
select different video modes.
➜ Or, setTV to channel 3 or 4 if you are using
an RF modulator.
NTSC
– Select this if the connectedTV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
Selecting the color system that
matches yourTV set
This DVD Mini Hi-Fi System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Mini Hi-Fi System, the color
systems of the DVD,TV set and DVD Mini Hi-Fi
System should match.
– Select this if the connectedTV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
1
2,3
4
NTSC
PAL
SET TO NTSC
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Step 4: Setting speakers
Step 5: Setting language
preference
IMPORTANT!
– This function is only available when
you have connected other 3.1-channel
speakers.
You can select your preferred language settings
so that this DVD Mini Hi-Fi System will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead. But the menu
language of the DVD Mini Hi-Fi System cannot
be changed once selected.
You can adjust the delay time (center and rear
only) for individual speakers to optimize the
sound effect according to your surroundings and
setup. Speaker settings are only active on
effective in the case of Multi-channel audio
output.
1
2,3
4
DIGITAL OUTPUT
PCM OUTPUT
NIGHT MODE
CENTER DELAY
OFF
5MS
1
In disc mode, stop playback and press SYSTEM
MENU.
REAR DELAY
TEST TONE
SOUND
2
3
Select
icon and press 4.
1
2
3
In disc mode, press SYSTEM MENU.
Select icon and press 4.
Press 2 / 3 / 5 / 4keys on the remote
control to select your preferred option.
Press 2 / 3 / 5 / 4keys on the remote
control to select your preferred option.
➜ Move to
➜ Move to one of the following and press 3.
and press 3.
➜ Move to
and press 3.
– Audio (disc’s soundtrack)
– Subtitle (disc’s subtitles)
– Menu (on screen menu)
➜ Move to“CENTER/REAR DELAY” and press 3.
4
5
Press 3to set CENTER/REAR DELAY values
you want.
➜ Use longer delay time if the surround
speakers are closer to the listener than the front
speakers.
4
5
Press 5 / 4to select a language and press OK.
Repeat steps 3~4 for other settings.
To remove the menu
Press OK to confirm.
Press SYSTEM MENU.
To remove the menu
Press SYSTEM MENU.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
4
Press OPEN•CLOSE to close the disc tray.
➜ “READING DISC” will be displayed.The
selected disc, total number of tracks and the
playing time will appear on the display.
➜ A lighted button indicates that a disc is loaded
in the disc tray.
➜ In the stop mode, press DISC on the
remote control repeatedly to select DISC 1,
DISC 2 or DISC 3 cyclically.
IMPORTANT!
– This system is designed for regular
discs.Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not push on the disc tray or put
any object other than disc on the disc
tray. Doing so may cause the system to
malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
●
Some discs can play automatically. For discs with
Table Of Contents, a memu may appear on the
TV screen.When the menu is displayed, press 5
/ 4 / 2 / 3keys to highlight your selection
and press OK to confirm.To select a play option,
press numeric keys (0-9).
➜ If a disc menu shows on theTV screen, see
“Using the Disc Menu”.
➜ If the disc is locked by parental control, you
must enter your four-digital password (See page
33, – Changing the password).
– According to the format requirement
of DVD orVCD, some operations may be
different or restricted.
5
Press 38to start playback.
For MP3-CD only
Playing discs
●
Load an MP3-CD in the disc tray.
➜ The number of total tracks will be shown for
3 seconds on the display, and then playback
starts from the first track.
1
2
Press STANDBY ON 2 to switch on the
system, and then press DISC to select disc
mode.
Power on theTV system and set to the correct
Video In channel (See page 20, Setting theTV
set).
➜ Press DISC MENU to select menu on/off.
Notes:
➜ You should see the blue Philips DVD
background screen on theTV set.
– Load discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
3
Press OPEN/CLOSE to open the disc tray and
load a disc respectively in the first two disc tyays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray is
ready for loading.
➜ Make sure the disc label is facing up. For
double-sided discs, load the side you want to
play facing up.
Using the disc menu
For disc withTable Of Contents, a menu may
appear on theTV screen once you load the disc.
To select a playback feature or item
Press 5 / 4 / 2 / 3or numeric keys (0-
9) on the remote control, then press 38or
OK to start playback.
●
●
To access or remove the menu
Press DISC MENU on the remote control.
DE
B
M
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Basic playback controls
Continuing playback from the
last stop point
In stop mode and before the disc is removed,
press RESUME to resume playback from
where you have stopped.
To play discs in all the disc trays
Press 38.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track will appear on the display.
●
●
●
To cancel the resume mode
Press 7again, or go into STANDBY, POWER
OFF, or press OPEN/CLOSE key.
To start playback from a selected disc
tray
Notes:
●
Press DISC 1, DISC 2 or DISC 3.
– Resume information will be erased if you have
changed the disc, opened the disc tray, changed
source or disconnected the system from the power
supply.
– Resume function is not available in PBC ON
mode.
To interrupt playback
Press 38.
To resume playback, press 38again.
●
●
To stop playback
Press 7.
●
– This function is not available for MP3 discs.
Skipping to another title (track) /
chapter
Press O or Pon the front panel (or 4or
¢on the remote control) repeatedly during
playback to skip backward or forward. Each press
will take the disc to the beginning of the previous
or next title (track) / chapter.
Selecting various mode functions
Repeat play mode
You can only select the Repeat play mode during
playback.
●
For DVD - repeat chapter/title
Press MODE repeatedly to select the following:
REPEAT CHAPTER ➜ REPEATTITLE ➜
REPEAT OFF
●
Note:
– If the player has been set to repeat chapter
(track), pressing this button will replay the same
chapter (track) from its beginning.
For CVD/SVCD/VCD/CD - repeat
chapter/title
●
●
Press MODE repeatedly to select the following:
REPEATTRACK ➜ REPEAT DISC ➜ REPEAT
ALL ➜ REPEAT OFF
To go directly to any title (track) /
chapter
Use the numeric keys (0-9) to enter the
number of the desired title (track) / chapter.
●
During program playback
Press MODE repeatedly to select the following:
REPEAT ONE-PROGRAMMEDTRACK ➜
REPEAT ALL PROGRAMMEDTRACKS ➜
REPEAT OFF
Fast search
Press 1 or ¡on the front panel to fast
reverse or forward the disc.
1
2
For MP3 repeat - track/album/disc
MENU ON:
Press MODE repeatedly to select the following:
REPEATTRACK ➜ REPEAT ALBUM ➜ REPEAT
DISC ➜ REPEAT ALL ➜ REPEAT OFF
Press and hold 4 or ¢on the remote
control for more than 1 second, to fast reverse
or forward the disc.
●
●
3
To resume normal play, press 38.
MENU OFF:
Press MODE repeatedly to select the following:
REPEATTRACK ➜ REPEAT DISC ➜ REPEAT
ALL ➜ REPEAT OFF
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Notes:
3
To resume normal play, press REPEAT A-B
again.
– When you open the disc tray, the Repeat
function will be cancelled automatically.
– For CVD, SVCD andVCD 2.0 discs, the Repeat
function is not available unless the PBC function is
set to OFF.
Note:
– The REPEAT A-B function can only be set within
the same chapter or track.
– If discs of different formats are loaded, the
Repeat function is only available for the current
disc.
Programing favorite tracks
You can play the contents of the disc in the
order you want.At most 99 tracks can be
stored.
Shuffle play mode
In this mode, all tracks in the current directory
will be played once in a random order.
1
2
Load the desired discs on the disc trays.
Press the DISC button to select the disc tray.
➜ Programming can only be done on the
selected disc.
1
2
3
In stop mode, press MODE to play in a shuffle
order.
➜ Playback will start from the first disc to the
last disc.
Press MODE repeatedly to select the following:
SHUFFLE DISC ➜ REPEAT SHUFFLE DISC ➜
SHUFFLE ALL ➜ REPEAT SHUFFLE ALL ➜
SHUFFLE OFF
3
4
While playback is stopped, press PROGRAM
to enter program mode.
➜ “P 00: 00” is displayed.
Use the numeric keys (0-9) to input the track
number in the order you want.
➜ If you attempt to program more than 99
tracks,“FULL” is displayed.
Press 38to start shuffle play.
5
●
6
7
8
Press OK to store the track.
In shuffle playback mode:
Press MODE again to display the current mode.
Repeat steps 3-4 to store other tracks.
Press 38to play the program.
●
●
Press ¢button to select another track in a
shuffle order.
Press 9 to stop shuffle playback.
To stop playback, press 7once.
To exit the program mode, press 7again.
4
Notes:
To cancel Shuffle mode:
In stop mode, press MODE repeatedly to select
SHUFFLE OFF.
– This function is not available for DVD or MP3
discs.
– If you open the disc tray, the program will be
cleared.
●
Notes:
– InTuner,Tape or AUX mode, this button does not
function.
Using the menu bar to program
– When the disc tray is opened, the Shuffle
function will be cancelled automatically.
– In the Shuffle playback mode, the system only
supports the same disc format.
FavoriteTrack Selection (FTS) lets you play your
favorite titles/chapters or tracks/indexes in the
order you select.An FTS program can contain 99
items (titles, chapters, etc.).
Repeating a section within a
chapter/track
You can play a specific section in a chapter/track
repeatedly.
IMPORTANT!
-
You can only program the current
disc.
-
You have to turn on yourTV set and
set to the correctVideo In channel. See
page 20, Setting theTV set.
1
2
Press REPEATA-B at your chosen start point.
Press REPEATA-B again at your chosen end
point.
1
Stop playback , then press SYSTEM MENU.
The menu bar will appear across the top of the
TV screen.
➜ The passage will now repeat continuously.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
2
3
Press 2or 3to select
, and press 4to
Changing subtitle language
This operation only works on DVDs with
multiple subtitle languages.
enter the program menu.
Repeat steps 4-8 listed above to program your
favorite tracks.
●
Select
from the menu bar and press 4to
select the desired language.
Changing discs during playback
1
2
Press DISC CHANGE.
➜ The disc tray will open without interrupting
playback.
Changing sound track language
This operation only works on DVDs with
multiple audio languages.
To change the inner disc, press DISC
CHANGE again.
➜ The active disc will stop playing and the disc
tray will close to retrieve the inner disc, then
reopen with the inner disc accessible.
●
●
Select
from the menu bar and press 4to
select the desired language.
For CVD/SVCD/VCD:
Press 4to select the desired audio channels for
sound.This function is only available for discs
recorded with different channels:
Special DVD/VCD features
LEFTVOCAL pRIGHTVOCAL pMONO
LEFT pMONO RIGHT p STEREO
Some operations can be carried out directly via
the multiple menu bars on theTV screen
without interrupting disc playback.
Note:
– If your desired language is not set in the disc,
you cannot select the language via this function.
1
2
Press SYSTEM MENU.
➜ The menu bar will be displayed across the
top of theTV screen.
Playing in slow motion mode
Press 2or 3to select:
SETUP MENU pSUBTITLE pAUDIO
LANGUAGE pSLOW pFAST REVERSE p
FAST FORWARD pSTATUS pTITLE
SEARCH pCHAPTER SEARCH pTIME
SEARCH pZOOM pANGLE pSTEP p
PBC ON/OFF pPROGRAM
SF
x1/2
For DVD
1
Select
from the menu bar and press 4
repeatedly to select the required slow motion
speed:
SF X 1/2 pSF X 1/4 pSF X 1/8 pSR X 1/2
pSR X 1/4 pSR X 1/8 pPLAY
SF = slow forward
3
Press 4to select the highlighted icon and press
5 / 4to select your preferred option.
Press OK to confirm a highlighted selection.
4
5
To exit, press SYSTEM MENU.
SR = slow reverse
IMPORTANT!
For CVD, SVCD orVCD
Press 4to select the required slow motion
speed:
(forward): SF X 1/1 pSF X 1/2 pSF X 1/3 p
PLAY
Some operations may be different or
restricted according to the disc format.
Refer to the jacket or case of the disc you
are playing.
1
2
Note:
Press 38to cancel the slow function.
– When you press a button and appears on the
TV screen, this means the function is not available
on the current disc or at the current time.
Note:
– This function is not available for MP3 and CD.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Searching for a particular
passage
Moving to another title (track) /
chapter
Some discs may contain more than one title or
chapter. If the disc has a title or chapter menu
recorded on it, you can start playback from the
selected item.
FR
x 2
FF
x 2
1
2
3
Select
bar.
(title) or
(chapter) from the menu
T
C
1
2
Select
or
from the menu bar to select
fast reverse search or fast forward search
respectively.
Use numeric keys (0-9) to select a desired
title/chapter number.
Press 4to select the required search speed:
Press OK to start playback.
For DVD or MP3
Note:
(reverse): FR X2 pFR X4 pFR X6 pFR X8
– Selecting a title or chapter might not be possible
on certain discs.
pPLAY
(forward): FF X2 pFF X4 pFF X6 pFF X8
pPLAY
Playing from a selected point
For CVD, SVCD,VCD or CD
This function allows you to start playback at any
chosen time on the disc.
(reverse): FR X1 pFR X2 pFR X3 pFR X4
pPLAY
(forward): FF X1 pFF X2 pFF X3 pFF X4
pPLAY
TIME
1
2
Select
from the menu bar.
3
To resume normal play, press 38.
Enter hours, minutes and seconds from left to
right in the time edit box using the numeric
keys (0-9).
➜ Each time an item has been entered, the next
item will be highlighted.
Displaying the disc information
during playback
●
Select
from the menu bar and press 4to
select the following display informations
3
Press OK to start playback.
Note:
– In repeat disc or repeat all mode, you can
search a desired time point.
DV D
VCD (PBC O N)
00 : 20 : 01
00 : 20 : 01
Zooming in
00 : 01 : 15
00 : 01 : 15
This function allows you to enlarge the picture
on theTV screen and pan through the enlarged
image.
00 : 20 : 12
00 : 30 : 45
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
1
Select
from the menu bar and press 4
Checking the contents of DVD
repeatedly to change the following zooming
scale:
ZOOM X1.5 pZOOM X2 pZOOM X4
pZOOM OFF
1
2
Press DISC MENU on the remote control.
➜ If the current title has a menu, the menu will
appear on the screen. Otherwise, the disc menu
will be displayed.
2
3
To pan through the enlarged image, press
SYSTEM MENU to exit and press 2 / 3 /
5 / 4buttons to move the zoomed picture
left, right, up or down.
Press 2 / 3 / 5 / 4to select the desired
title or chapter, and then press 38or OK.
➜ Playback start from the selected title or
chapter.
To exit ZOOM mode, select “ZOOM OFF”
from the menu bar.
Note:
– If no title menu is recorded in the DVD disc,
pressing this button will restart playback from the
first track.
Viewing from another angle
If the playing DVD disc is recorded with multiple
camera angles , the ANGLE mark on the setup
page will be set to ON automatically.This allows
you to view the picture from different angles.
Angle selection is determined by the disc format.
SpecialVCD/SVCD features
Playback control (PBC)
PBC playback allows you to playVideo CD
interactively, following the menu on the display.
●
Select
from the menu bar and press 4to
PBC
●
Select
from the menu bar and press 5 / 4
toggle between PBC ON and PBC OFF.
buttons to select the desired angle: 1/4, 2/4, 3/4
or 4/4.
➜ Playback changes to the selected angle.
Playing a disc with PBC function
If PBC OFF, the system will start playback
automatically.
If PBC ON, the PBC menu (if available) will
appear on theTV screen for selection. Use the
numeric keys (0-9) to enter your choice.
●
●
Advancing by frames
Note:
1
2
Select
from the menu bar and press 4to
– This function is not available for CD or MP3
discs.
play the disc step by step (one frame each step).
To resume normal play, press 38.
Note:
– This function is not available for CD or MP3
discs.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 / Picture Disc Operations
Playing MP3 / picture disc
(Kodak, JPEG)
Kodak picture disc
Load a Kodak Picture disc.
1
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
IMPORTANT!
– You have to turn on yourTV set and
set to the correctVideo In channel. (See
page 20, Setting theTV set.)
2
3
Playback will start automatically.
Press 9.
MP3 / JPEG picture disc
➜ 9 thumbnail pictures will appear on theTV
screen.
1
2
Load an MP3/Picture (JPEG) disc.
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
(example for picture disc menu)
1
4
7
2
5
8
3
6
Playback will start automatically.
➜ The album/picture menu will appear on the
TV screen. If not, press DISC MENU on the
remote control.
9
(example for MP3 disc menu)
SMART NAVI
ROOT
0
Root
4
5
Press 4 / ¢to view the previous/next page
TITLE NAME1
TITLE NAME2
TITLE NAME3
TITLE NAME4
1
(if available).
2
Press 1 / 2 / 3 / 4to move within the menu
and press OK to select the desired picture to
play.
3
4
TITLE NAME5
5
6
Press 2;to start the slide-show playback.
During playback, you can:
Press 4 / ¢to select another title/picture
in the current folder.
3
Press 1 / 2 / 3 / 4to select a desired album,
then press OK or 2;to confirm (for MP3 disc
only).
●
●
●
Press 1 / 2 / 3 / 4on the remote control to
rotate or flip the picture files.
4
Press 1 / 2 / 3 / 4to select a desired title,
then press OK or 2;to start playback.
You can also use the numeric keys (0-9) to
enter your choice.
●
Press 2;to pause/resume playback.
If the MP3-CD menu is switched off
You can only play the current title by pressing
2;. While in playback mode, press 4 / ¢to
select the previous/next title.
5
To stop playback, press 9.
●
➜ The title number will appear.
Notes:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional “skip”
while you are listening to your MP3 discs.
– For multi-session discs with different formats,
only the first session can be read and played.
– DISC MENU does not function during Kodak
Picture disc playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Operations
Subtitle Language
Press 4to select a desired language in DVD
mode.
Audio Language
Press 4to select a desired audio language on
the DVD, CVD, SVCD,VCD:
Using the menu bar
i
You can continue some operations directly via
the multiple menu bars on theTV screen
without interrupting the disc playback. But when
you enter
pause.
(SETUP MENU), the playback will
LeftVocal pRightVocal pMono Left p
Mono Right pStereo
x
Slow Motion
The slow motion speed will display. Press 4
repeatedly to select a reverse or forward
slow motion speed.
1
To cancel the slow function, press 2;.
Fast Reverse
Press 4repeatedly to select a reverse fast
speed.
To cancel the fast reverse function, press 2;.
Fast Forward
2,3
4
5
6
Press 4repeatedly to select a forward fast
speed.
1
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV set screen.
To cancel the fast forward function, press 2;.
STATUS
In DISC mode, select this icon and press 4to
view the time, title or chapter information of
the playing disc.
T
C
Title Search
Press 4to display the message of title, use
the number keys to enter a desired title you
want, and then press OK to start playback.
Time Search
Playback will pause and a time edit box ap-
pears on the display. Use the numeric keys
(0-9) to enter the time (hours : minutes : sec-
onds) at which you want to start playback,
then press OK to start playback. (This func-
tion is not available in the PBC ON mode.
ZOOM
2
3
Press the 1 / 2 / 3 / 4on the remote
control to navigate in the menu.
➜ Press 1 / 2to move through the menu bar.
➜ Press 4to enter the selection.
Press OK to confirm the selection.
➜ Playback will resume or begin automatically.
Press 4repeatedly to select an enlarged pic-
ture ratio: 1.5, 2 or 4.You can press 1 / 2 /
3 / 4to move within the enlarged picture
on theTV set.
To resume normal playback, repeat the above
step to select ZOOM OFF.
To remove the menu
Press SYSTEM MENU or OK.
IMPORTANT!
ANGLE
– Some operations may be different or
restricted according to the disc format.
Refer to the jacket or care of the disc
you are playing.
Press 4to view the same scene from differ-
ent angles if the DVD is recorded with multi-
angles.
STEP
Press 4repeatedly to play forward the disc
step by step (one frame every step).To cancel
the step function, press 2;.
– You can change the Subtitle Language
and Audio Language from the menu bar
only on the current disc. But this
operation cannot change the default
preset.
PBC PBC
Press 4to select PBC ON or OFF, and then
playback will stop automatically. (This function
is not available for CD or MP3 discs.)
PROGRAM
See page 24, Using the menu bar to program.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Operations
Using the setup menu (user
preference settings)
This DVD setup is carried out via yourTV set,
enabling you to customize the DVD Mini Hi-Fi
System to suit your particular requirements.
Setting theTV shape
Make sure the format you need is available on
the disc. If not, your setting will be invalid.
4:3 LB
16:9
1
SET TO LETTER BOX
2,3
4
4:3 PS (Pan and Scan mode)
Select this if you have a conventionalTV set and
your DVD is not formatted for wide screen
viewing.A wide picture will display on the whole
TV screen with a portion automatically cut off.
1
2
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
4:3 LB (Letterbox mode)
Select this if you have a conventionalTV set and
your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower
portions of theTV screen.
Select
icon and press 4 to enter the setup
menu.Then press 3 / 4 to select one of the
setup menu options and press 2 to enter the
menu.
➜ Playback will pause.
16:9 (Wide-screenTV)
Select this if you have a wide-screenTV set (you
must also set your wide screenTV to “full size”).
SETUP MENU
Picture Setup
Sound Setup
Language Setup
Feature Setup
16:9
(Wide screen)
3
4
Press 1 / 2 / 3 / 4on the remote control to
navigate in the menu.
Press OK to confirm your selection.
➜ Playback will resume or begin automatically.
4:3 LB
(Letter Box)
Removing the menu
Press SYSTEM MENU or OK.
Note:
– Some features of the Setup Menu are described
in “Preparations”.
4:3 PS
(Pan Scan)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Operations
Setting the digital output
Setting the video out
Set Digital Output according to your optional
audio equipment connections.
Video Out selection enables you to choose the
type of video output suitable for your DVD
system.
OFF
DIGITAL OUTPUT
PCM OUTPUT
NIGHT MODE
CNTR DELAY
REAR DELAY
ALL
PCM ONLY
PR PB Y
TEST TONE
SET SPDIF OFF
SET S-VIDEO
Off
S-VIDEO
Select this to deactivate the digital output.
– Select S-VIDEO if you have connected the
S-VIDEO output to yourTV system using S-
VIDEO jack.
All
Select this if you have connected the digital
output to a piece of optional audio equipment
that has a multichannel decoder.
PR PBY
– Select PR PBY if you have connected the
video output to yourTV system using PR PBY
jack.
PCM only
Select this if the external component is capable
of processing digital signal input.After that,
proceed to “Setting the PCM output”.
Note:
– You do not need to adjust the video output
setting if you are usingVIDEO jack (yellow) to
connect the system to yourTV system.
Setting the PCM output
Setting the screen saver
DIGITAL OUTPUT
PCM OUTPUT
NIGHT MODE
CNTR DELAY
REAR DELAY
PCM 96K
PCM 48K
TEST TONE
PCM 48K OUTPUT
P-SCAN
OFF
ON
PCM 96K
SCREEN SAVER NOW ON
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rate of 96 kHz. However, if the sound
output is distorted or there is no sound, select
‘48 kHz’.
If set to ON, the screen saver will be activated
when you leave the system in stop or pause
mode for 1 mimute.The default setting is ON.
PCM 48K
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input, then convert to standard signal with
sampling rate of 48 kHz.
Note:
– The PCM OUTPUT can be selected only when
PCM ONLY is selected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Operations
➜ Move to
➜ Move to “PASSWORD” and press 2.
icon and press 2.
Night mode - turning on/off
DIGITAL OUTPUT
PCM OUTPUT
NIGHT MODE
CNTR DELAY
REAR DELAY
OFF
ON
ENTER CODE
TEST TONE
NIGHT MODE SET TO OFF
ENTER ORIGINA PASSWORD
Off
4
Use the numeric keys (0-9) to enter your
four-digit code.
Select this when you want to enjoy the surround
sound with its full dynamic range.
➜ The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9four
times, the system will change back to the default
password.
Go to “Password” and enter your new code.
Then, enter the same code again to confirm.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level.This
feature is only available for movies with Dolby
Digital mode.
●
Changing the password
You can change the four-digit code used as
ENTER CODE
Password.
ENTER ORIGINA PASSWORD
5
Press SYSTEM MENU again to cancel the
menu.
4
1,5
2,3
1
2
3
In disc mode, press SYSTEM MENU.
Select
icon and press 4.
Press 1 / 2 / 3 / 4on the remote control to
navigate in the menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Operations
Restricting playback by setting
parental level
5
Press 3 / 4to select a rating level between 1-8
and press OK.
➜ DVDs rated above the level you select will
not play unless you enter your four-digit
password or choose a higher level rating. Select
‘NO PARENTAL’ to deactivate Parental level and
have all discs play.
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc.This feature lets you set a playback limitation
level.The rating levels are from 1 to 9 and are
country specific.You can prohibit the playing of
certain discs that are not suitable for your
children or have certain discs played with
alternative scenes.
6
Press SYSTEM MENU again to cancel the
menu.
4
Rating explanations
NO PARENTAL – It will play all discs.
8 ADULT – material for adults only; viewed
only by adults due to graphic sexual scenes,
violence, or language.
1,6
2,3,5
7 NC-17 – No children under age 17; not
recommended for children under age 17.
6 PG-R – Parental Guidance – Restricted;
recommended that parents restrict children
under 17 from viewing or allow them to view
only when supervised by a parent or adult
guardian.
4 PG 13 – Material is unsuitable for children
under age 13.
3 PG – Parental Guidance suggested.
1 G – General Audience; recommended as
acceptable for viewers of all ages.
1
2
3
In disc mode, press SYSTEM MENU.
Select
icon and press 4.
Use 1 / 2 / 3 / 4on the remote control to
navigate in the menu.
➜ Move to
icon and press 2.
➜ Move to “PARENTAL” and press 2.
– Menu language
To set the screen display language.The default
setting is English.
ENTER CODE
– Default
If RESET is selected, all the items in the setup
menu will be reset to default setting, except
Parental Setting.
ENTER PARENTAL PASSWORD
4
Use the numeric keys (0-9) to enter the four-
digit code.You may have to enter the same code
twice.
➜ If not successful, see page 33, Using the Setup
Menu - Changing the password.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
2
Press and hold PROGRAM until “AUTO”
appears on the display.
➜ PROG will start to flash.
IMPORTANT!
– Make sure FM and MW antennas are
connected.
➜ The system will start to search all radio
stations on the FM band, then MW band.
➜ All radio stations with strong signal strength
will be stored automatically.
➜ The system will stop searching when all
available radio stations are stored or when the
memory of 40 preset radio stations is full.
➜ The first preset radio station will then be
played when completed.
Tuning to radio stations
1
2
Press TUNER to select “FM XX” or “MW XX”.
Press and hold 4 / ¢on the remote
control or 1 / ¡on the system until the
frequency indication starts to change, then
release.
➜ The next radio station will be tuned
automatically.
To stop storing the automatic preset
➜ i lights up for FM stereo reception.
●
Press PROGRAM or 7on the system.
3
To tune a weak station, press 4 / ¢on the
remote control or 1 or ¡on the system to
auto search until a radio station with sufficient
signal strength is found.
If you use ¡ / ™on the system for frequency
tuning, make sure the system is in frequency
tuning mode. If not, press TUNER.
Note:
– If no preset number is selected, automatic
preset will begin from “P 01” and all your former
presets will be overridden.
●
Presetting radio stations
You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
MW bands.
Automatic preset programming
You can start automatic presetting from a
selected preset number.
1
Press TUNER (BAND) to selectTUNER mode.
➜ The current radio frequency will appear on
the display.
To begin automatic preset from a desired
preset number
●
Press O / P, 2 / 3or numeric keys (0-
9) to select the desired preset number.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Manual preset programming
Changing tuning grid
1
2
Press TUNER (BAND) repeatedly to select the
desired tuner band: FM or MW.
In some countries, the frequency step between
adjacent channels in the MW band is 9 kHz (10
kHz in some areas).The preset frequency step in
the factory is 9 kHz.
Press and hold 1 / ¡on the system or
4 / ¢on the remote control to search a
radio frequency.
1
Plug the AC power cord.
3
4
Press PROGRAM.
➜ “PROG” and “P 01” will display.
2 Press TUNER to select MW mode.
3
Press and hold 9for more than 3 seconds when
reconnecting the system to the AC power
supply.
Press O / Pon the system, 2 / 3or
numeric keys (0-9) on the remote control to
select the desired preset number.
➜ “STEP XX K” appears.
5
After selecting an address number, press
PROGRAM again to store the radio station.
Repeat steps 3-5 to store other preset radio
stations.
Note:
●
– All preset stations will be lost and need to be
reprogrammed.
To stop storing the manual preset
●
Press 7on the system.
Note:
– If you attempt to store more than 40 preset
radio stations,“FULL” will be displayed.
Selecting a preset radio station
●
In tuner mode, press 2or 3or use the
numeric keys (0-9) to select the desired
preset number.
➜ The preset number, radio frequency, and
waveband are displayed.
Deleting a preset radio station
1
2
Press Oor Pto select the preset radio station
to be erased.
Press 7on the system,“PRESET DELETED”
appears on the display.
➜ The radio frequency remains on the display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
●
Repeat steps 1-2 to erase other preset radio
stations.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
IMPORTANT!
Rewinding or forwarding fast when
playback is stopped
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
1
2
Press 1or ¡on the front panel (or press
2 or 3on the remote control).
Press 7when you reach the desired passage.
Resetting tape counter number
In stop mode, press 7.
●
General information on
recording
Tape playback
Press 0to open the tape deck door.
Insert a recorded tape and close the tape door.
Load the tape with the open side down and the
full spool to the left.
1
2
●
●
If you don’t intend to record via the
microphone, unplug it to avoid unwanted
recording source.
●
●
For recording, only use tape of IEC type I(normal
tape).
The recording level is set automatically,
regardless of the position of theVolume,Vocal,
Key control and so forth.
●
●
The type is secured at both ends with leader
tape.At the beginning and end of the tape,
nothing will be recorded for seven seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
3
Press TAPE (TAPE 1•2) or TAPE1/2 on the
remote control repeatedly to select tape deck 1
or tape deck 2.
➜ The selected tape deck number is displayed.
4
●
●
Press 38to start playback.
Stopping playback
Press 7.
Changing the playback mode
Press AUTO REPLAY repeatedly to select:
ONCE,AUTO REPLAY. The default setting is
ONCE.
●
Press REC inTuner, Disc or AUX mode, press
REC, and “CHECK TAPE” will scroll on the
display if there is no recordable tape in tape
deck 2.
AUTO REPLAY ... the tape will rewind
automatically at the end of
playback and replay. It will
replay up to max. 10 times
or until you press 9.
ONCE ........................... the selected side will be
played once.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
IMPORTANT!
Dubbing tapes
Load the prerecorded tape into tape deck 1.
You can set the tape to the desired passage
where recording will start.
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck
2.
1
●
2
Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ “DBB 000” will be displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A for example, flip the
tape to side B and repeat the procedure.
Preparation for recording
Press TAPE (TAPE 1•2) to selectTAPE 2.
●
1
2
Load a recordable tape into tape deck 2 with
the full spool to the left.
3
Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX/TV – connect external equipment.
To stop dubbing
Press 9.
●
Note:
– Press DUBBING twice for high speed dubbing,
and the audio output will be muted at the same
time.
When recording is in progress
Press DISC, TUNER or AUX/TV to select
the source.
1
●
You can connect a microphone to record the
mixed sound in tape deck 2.
2
3
Start to play the selected source.
Press REC to start recording.
To stop recording
●
Press 9on the system.
Disc synchro recording
1
●
Press DISC to select the disc.
Press Oor Pto select a desired track to
record.
●
You can record programmed tracks in the order
you want.
2
Press REC to start recording.
➜ “REC” will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1
2
3
Press 2;to interrupt recording.
Press Oor Pto select another track.
Press 2;to resume recording.
To stop recording
Press 9.
●
➜ Recording and disc playback will stop
simultaneously.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer Operations
-
-
-
1
2
3
-
Viewing clock
The clock (if it is set) will be shown in Standby
mode.
2
3
Press TIMER to select timer mode.
➜ TIMER will start to flash.
➜ The selected source will be displayed.
Press DISC,TUNER orTAPE to select timer
mode.The corresponÍding source will appear on
the display.
●
Press DISPLAY to select 12-hour or 24-hour
mode.
➜ If the clock has not been set,“--:--“ will blink
(1 kHz) until you set the clock.
DISC - load the disc.To start from the specific
track programmed. (refer to page 24, Disc
Operations - program favorite tracks”).
TUNER -Tune to the desired radio station.
TAPE2 - Load the prerecorded tape into tape
deck 2.
Setting the clock - see page 19.
Setting the timer
The system can switch to DISC,TUNER orTAPE
mode automatically at a preset time, serving as
an alarm to wake you up.
4
5
Press Oor Pon the system to set hours .
Press 1or ¡on the system to set the
minutes.
IMPORTANT !
– Before setting the timer, ensure that
the clock is set correctly.
– The timer will always be switched on
once set.
– The timer will not start if a recording
is in progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
6
Press TIMER to store the start time.
➜ “TIMER ON” will be displayed for 3 seconds.
➜ The timer will start to work.
●
At the preset time, the selected source
will play before it switches to Eco Power
standby mode (if no button is pressed within
the time frame).
To exit without storing the setting
– The system will bring the timer
forward 1 minute to turn on.
– The time can be set in 24-hour mode.
●
●
Press 7on the system.
To deactivate the timer
Press and hold TIMER for more than 3 seconds.
1
Press STANDBY ON on the system to
STANDBY mode.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
To activate the timer (for the same preset
time and source)
Setting the sleep timer
The sleep timer enables the system to switch to
Eco Power standby mode automatically at a
preset time.
1
2
Press and hold TIMER for more than 3
seconds.
Press TIMER again to store the start time.
➜ The last set timer information will be shown
for a few seconds andTIMER will appear on
the display.
●
Press SLEEP on the remote control repeatedly
and stop at the desired preset turn-off time.
➜ Following options are available (time in
minutes):
15p30p45p60p90p120pOFF
p......
➜ “SLEEP” will show on the display panel
unless “OFF” is selected.
➜ Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
Notes:
– If the source is disc mode, playback will begin
with the first track of the last selected disc or other
trays if the disc is empty. If all disc trays are empty,
the system will automatically switch toTuner mode.
– During timer setting, if no button is pressed
within 30 seconds, the system will exit timer setting
mode automatically.
– When the system is powered on, if the
memorized volume level is less than 20, the system
will automatically adjust to 20 increasingly. If the
memorized volume level is more than 20, the
system will adjust to the memorized level within 5
seconds.
To check or change the setting
●
●
Press SLEEP once to show the remaining time
before switching off. If you continue pressing the
SLEEP button, the next SleepTimer option will
appear on the display.
To cancel the sleep timer
Press SLEEP repeatedly until“OFF” is displayed,
or press the STANDBY ON button.
– The timer will be cancelled when the power
cord is disconnected or if a power failure occurs.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound andVolume Controls
Sound control
Selecting sound effect
IMPORTANT!
– This DVD Mini HiFi system can only
produce 2.1 channel surround sound.
The digital sound effect allows you to select from
various preset modes that control the frequency
bands of sound to optimize certain musical
styles. It greatly enhances the excitement and
enjoyment of your favorite music.
●
Press SURROUND on the remote control to
select surround or stereo mode.
●
●
Press SOUND repeatedly to select the
available sound effect.
➜The availability of the various surround sound
modes (Dolby Digital Surround, DTS Surround,
Virtual Surround Sound) depends on the
number of speakers used and the incoming
sound information available on the disc.
Playing a DVD/VCD
You can selectVirtual Ambience Control as
follows:
– ACTION, DRAMA, SCI-FI, CONCERT,
MAX ON, MAX OFF
Notes:
– The default is Stereo.
– You cannot select the SURROUND SOUND
mode if the SYSTEM MENU is turned on.
Playing a CD/MP3 or inTuner or AUX-
ANA mode
●
You can select Digital Sound Control:
MAX sound
–
DIGITAL, CLASSIC, JAZZ, ROCK, MAX ON,
MAX sound provides the best mixture of
various sound features.
MAX OFF
●
Press MAX SOUND repeatedly to achieve the
optimal sound.
Volume control
➜ If MAX SOUND is activated,
blink and “MAX ON” will appear on the display.
Note:
– When the MAX SOUND is selected, other
sound modes will switch off automatically.
will
Changing the volume level
●
●
Rotate VOLUME clockwise / anti-clockwise (or
press VOL +/-) to increase or decrease the
volume level.
➜ “VOL XX” is displayed.
➜ “VOL MAX” is displayed at maximum level.
Press SUBW +/- to adjust the level of the
subwoofer speaker.
➜ “SUBW XXDB” is displayed.
➜The range is from -7dB to +8dB.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound andVolume Controls
●
●
Press REAR +/- to adjust the level of the
surround speakers volume.
➜ “REAR XXDB” is displayed.
➜The range is from -7dB to +8dB.
Press CENTER +/- to adjust the level of the
center speakers volume.
➜ “CNT XXDB” is displayed.
➜The range is from -7dB to +8dB.
Note:
– The above operations are valid only if you have
5.1 speaker connection.
For PHILIPSTVs only:
●
Press TVVOL +/- on the remote control to
adjust the volume of theTV.
Note:
– You can press these buttons to adjust the
speakers’ levels during tone test.
Switching off the volume
temporarily
●
Press MUTE.
➜ “MUTE ON” is displayed.
Press MUTE again or increase the volume level
to cancel the MUTE mode.
Listening through headphones
Connecting headphones to ; will switch off the
speakers.The system will switch STEREO and
the surround sound will be reduced to a stereo
signal which is reproducible by standard
headphones.
Disconnecting the headphones will switch on the
speakers again. If you wish to enjoy surround
sound again, switch the system back to surround
sound.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
brightness for the display: HIGH, MID or LOW.
Switching on/off
Switching the system on
Vocal
In standby/demonstration mode
Press STANDBY ON.
➜ The system will go back to its previous status.
This function allows you to fade out the original
vocal from a karaoke.You can use it to select
different audio modes.
●
●
Press DISC, TUNER, AUX, TAPE (or DISC,
TUNER, AUX/TV on the remote control).
➜ The system will switch to the selected source.
For DVD karaoke discs:
AUDIO 1VOCAL,AUDIO 2VOCAL.
ForVCD karaoke discs:
LEFTVOCAL, RIGHTVOCAL or STEREO
Press VOCAL.
➜ TheVocal indicator will flash until you rotate
the JOG to selectVOCAL ON or OFF.
In eco power standby mode
Press ECO POWER.
➜ The system will switch to last selected source.
Press DISC, TUNER, AUX/TV on the remote
control to power on the system.
●
●
●
Note:
– “PLEASE INSERT MIC” is displayed on your
TV screen if you have not connected the
microphone to the system inVOCAL ON mode.
Switching the system to standby
mode
In demonstration mode
●
●
Press and hold DEMO STOP 7on the system.
In any other source mode (except Econ
Power Standby mode)
Press STANDBY ON (or 2 on the remote
control).
➜ The time will appear on the display when the
system is in Standby mode.
Switching to eco power standby
mode
●
Press ECO POWER to ECO POWER mode.
➜ “ECO POWER” will be shown for 3 seconds
and scroll from left to right on the display.
➜ The system will go to standby mode, and
then to ECO Power mode in 5 seconds.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you
don’t press any button within 30 minutes in the
stop mode.
Dimming the display
●
Press DIM repeatedly to select different levels of
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
1
Connect a microphone to the MIC jack.
Key control
➜ “MIC” will appear on the display.
➜ “MICROPHONE PLUG IN” will display on
yourTV screen.
This feature allows you to change the key tone
when you play a DVD orVCD disc.
●
Before connecting the microphone, set the
microphone LEVEL to the minimum level to
prevent howling.
●
●
Press KEY CONTROL.
➜ The Key Control indicator will flash until you
rotate JOG to change the key tone level.
2
3
4
Press DISC, TUNER, TAPE or AUX/TV to
select the source to be mixed and start playback.
Rotate JOG control to (0).
➜ If you don’t adjust the key control level within
5 seconds, the indicator will turn off.
Adjust the volume of the source through
VOLUME control.
Adjust the microphone volume through
microphone LEVEL control.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
Notes:
●
Press ECHO and rotate JOG to adjust the
echo level between 0 and 8.
➜ The indicator will flash until you rotate the
JOG to change the echo level.
– Keep the microphone away from the speakers to
prevent howling.
– “MICROPHONE PLUG OUT” will display on
yourTV screen when you unplug the microphone.
Notes:
Listening to external sources
– Echo will be disabled automatically when the
microphone is unpluged.
– “PLEASE INSERT MIC” is displayed on your
TV screen if you have not connected the
microphone to the system inVOCAL ON mode.
1
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/TV IN
terminals of your system.
2
Press AUX/TV repeatedly to selectTV/CDR
mode directly.
Karaoke
➜ “AUX/TV” will be displayed.
●
If the sound from the external source is
distorted, selectTV/CDR mode.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All navigation sound control features are
available.
Connect a microphone (not supplied) to the
system to sing along with the music source.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD SECTION
AMPLIFIER SECTION
Output power ............................. 120 WTotal power
Stereo mode (DIN) .......... 60 W + 60 W RMS
Surround mode (1 kHz) ...................... DIN OUT
Frequency Response .. 100 Hz - 20 kHz / – 3 dB
Signal-to-Noise Ratio ........................> 65dB (CCIR)
Input Sensitivity
AUX/TV In........................................................ 500 mV
Output Sensitivity
Headphone............................... 600 mV – 800 mV
Line Out ..................................... 300 mV – 500 mV
LaserType ................................................ Semiconductor
Disc Diameter.............................................. 12cm / 8cm
Video Decoding ........................... MPEG-2 / MPEG-1
Video DAC ................................................................ 10 Bits
Signal System ............................................... PAL / NTSC
Video Format ..................................................... 4:3 / 16:9
Video S/N........................................... 56 dB (minimum)
CompositeVideo Output ................ 1.0Vp-p, 75 Ω
S-Video Output ............................. Y - 1.0Vp-p, 75 Ω
...........................................................C - 0.286Vp-p, 75 Ω
Audio DAC .......................................... 24 Bits / 96 kHz
Frequency Response .... 4 Hz - 20 kHz (44.1kHz)
......................................................4 Hz - 22 kHz (48kHz)
......................................................4 Hz - 44 kHz (96kHz)
Digital Output .........................................................................
....... SPDIF (Sony Philips digital interface) Coaxial
PCM...................................................................... IEC 60958
Dolby Digital/DTS ............... IEC 60958, IEC 61937
TUNER SECTION
Tuning Range ...........................................................................
.........................FM 87.5 – 108 MHz ( 50 kHz steps)
.......................... MW 531 – 1602 kHz (9 kHz steps)
......................... AM 530 – 1710 kHz (10 kHz steps)
26 dB Quieting Sensitivity .......................... FM 20 dB
26 dB Quieting Sensitivity ..........MW 3162 mV/m
Image Rejection Radio ................................... FM 25dB
................................................................................ MW 28 dB
IF Rejection Ratio ............................................ FM 60 dB
................................................................................ MW 24 dB
Signal-to-Noise Ratio .................................... FM 60 dB
................................................................................ MW 40 dB
MW Suppression Ratio ............................... FM 30 dB
Harmonic Distortion .......................... FM Mono 3 %
........................................................................ FM Stereo 3 %
..................................................................................... MW 5 %
Frequency Response ...........................................................
......................................... FM180 Hz – 10 kHz / 6 dB
Stereo Separation ......................... FM 26 dB (1 kHz)
StereoThreshold ..........................................FM 23.5 dB
MAIN UNIT
Power Supply Rating ...... 110 - 127 / 220 - 240V
........................................................... 50/60HZ Switchable
Power Consumption
Active .......................................................................160W
Standby .................................................................. <15W
Dimensions (w × h × d) .265× 310 × 394 (mm)
Weight....................................................................... 5.46 kg
SPEAKERS
Front speakers
System ................................................................. triple drive
Impedance........................................................................ 4 Ω
Speaker drivers.................................. 1× 5.25’’ woofer,
........................................................................... 1× 2’ tweeter
Frequency response ........................ 80 Hz – 20 kHz
Dimensions (w × h × d) ...................................................
..................................................... 210 × 313 × 234 (mm)
Weight............................................................. 3.42 kg/each
TAPE SECTION
Frequency Response
Normal tape (type 1) ..80 – 12500 Hz (8 dB)
Signal-to-Noise Ratio
Normal tape (type 1) ............................. ≥ 45 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
No power.
–
Check if the AC power cord is properly
connected.
“UNREADBLE DISC” is displayed.
–
–
Check if the disc is inserted upside down.
Wait until the moisture condensed at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
Use a readable disc or correctly recorded format
MP3-CD.
No picture.
–
Select the appropriate video input mode on the
TV set.
–
–
–
Check if theTV set is switched on.
Check the video connection.
Check if the system is securely connected.
Distorted or poor picture.
–
Sometimes a slight picture distortion may appear.
This is not a malfunction.
–
–
Clean the disc.
Connect the system to the S-video input of your
TV set.
The aspect ratio of the screen
cannot be changed even though
you have set theTV shape.
–
–
The aspect ratio is fixed on the DVD disc.
The aspect ratio may not be changed for some
TV systems.
The DVD player does not
start playback.
–
–
Insert a readable disc.
Check the disc type, color system and region
code.
–
–
–
Clean the disc.
Place the disc with the playback side down.
Press SYSTEM MENU to turn off the setup
menu.
–
–
Cancel the parental control rating function or
change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
The system does not respond
when the buttons are pressed.
–
Disconnect the power plug from the jack, and
insert again.
The language for the sound or
subtitle cannot be changed when
playing a DVD.
–
–
Multi-language sound or subtitle is not recorded
on the DVD.
Changing the language for the sound or subtitle is
prohibited on the DVD.
No image is output when a
function is selected.
–
–
Make sure the component is connected correctly.
Press the correct function button for the input
source.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Sound cannot be heard or is of
poor quality
–
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
If the system is in pause, slow motion or fast
forward/reverse mode, press 2;to resume the
normal play mode.
–
Make sure the MP3-CD was recorded within 32-
256 kbps bit rate with sampling frequencies at 48
kHz, 44.1 kHz or 32 kHz.
Poor radio reception.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the MiNi HiFi
System and yourTV set orVCR.
Recording or playback cannot be made
The tape deck door cannot open
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL tape.
Apply a piece of adhesive tape over the missing
tab space.
–
–
–
Remove and reconnect the AC power plug and
switch on the system again.
Left and right sound outputs are
reversed.
Check the speaker connections and location.
The remote control does not
function.
Point the remote control at the remote control
sensor of the unit.
–
–
–
–
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
The display is dark.
–
Press DIM again.
The timer is not working
–
–
Set the clock correctly.
If recording is in progress, stop it
The Clock/Timer setting is erased
–
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Multichannel: DVD is specified to have all
sound tracks constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing without data
compression.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
reproduction control. By using screen menus
recorded on aVideo CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
Plug and Play (for tuner installation):
Once powered on, the system will prompt the
user to proceed with the automatic installation
of radio stations by simply pressing 2;on the
main unit.
Region code: A system allowing discs to be
played only in preset regions.This unit will only
play discs that have compatible region codes.You
can find the region code of your unit from the
product label. Some discs are compatible with
more than one region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for luminance and the color.You
can use S-Video only if yourTV set has S-Video
In jack.
Analog: Sound that has not been turned into
numbers.Analog sound varies, while digital sound
has specific numerical values.These jacks send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs. is
4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV set, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate better
the sound quality. However, higher bit rates use
more space on a Disc.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles.A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the
back of the DVD System that sends high-quality
video to aTV set that has ComponentVideo In
jacks (R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for the
selection of images, sound, subtitles, multi-angles,
etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL
or OPTICAL jacks.These jacks send audio
through multiple channels, instead of just two
channels as analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up
to six channels of digital audio (front left and
right, surround left and right and center).
DTS: DigitalTheater Systems.This is a surround
sound system, but different from Dolby Digital.
The formats were developed by different
companies.
JPEG: A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
Sampling Frequency: Frequency of data
sampling when analog data is converted to
digital data. Sampling frequency numerically
represents how many times the original analog
signal is sampled per second.
Surround: A system for users to create
realistic three-dimensional sound fields full of
realism by arranging multiple speakers around
the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate
the title you want.
compression system,“MPE” is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Lagyer 3.Through the MP3 format, one
CD-R or CD-RW can contain about 10 times as
much data volume as a regular CD can.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video toTV.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
|