Philips Projector PPX1230 User Manual

Register your product and get support at  
PPX1230  
EN User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
EN  
Connecting using Component-Video (YPbPr/YUV)  
Table of Contents  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 General Safety Information  
EN  
Introduction  
2
Do not allow children to handle the device without supervision.  
Do not make any changes or settings that are not  
described in this user manual. Physical injury or damage  
to the device or loss of data can result from improper  
handling. Take note of all warning and safety notes indi-  
cated.  
Do not allow children to handle the device without  
supervision. The packing materials should be kept out of  
the hands of children.  
Repairs  
Repairs  
Do not make any repairs to the device yourself.  
Setting Up the Device  
The device is exclusively for indoor use. The device  
Improper maintenance can result in injuries or damage  
to the device. Only have your device repaired by an  
authorised service centre.  
Device only indoor  
should be placed securely on a stable, flat surface. Posi-  
tion all cables in such a way that no one will stumble on  
them, thus avoiding possible injuries to persons or dam-  
Do not remove the type label from your device; this  
would void the warranty.  
age to the device itself.  
Do not plug in the device in moist rooms.  
Do not plug in the device in moist rooms. Never touch  
the mains cable or the mains connection with wet  
Power Supply  
Use only the enclosed power adapter (see chapter  
Use only the enclosed power adapter  
hands.  
The device must have sufficient ventilation  
The device must have sufficient ventilation and may not  
be covered. Do not put your device in closed cabinets  
Appendix / Technical Data). Check whether the mains  
voltage of the power supply matches the mains voltage  
available at the setup location. This equipment complies  
or boxes.  
Do not place your device on soft surfaces such as cloth covers or carpets  
with the voltage type specified on the unit.  
Do not place the machine on soft surfaces such as table-  
cloths or carpets and do not cover the ventilation slits.  
The capacity of the battery diminishes with time. (Power supply)  
The capacity of the battery diminishes with time. If the  
device functions only with the power supply, the battery  
is defective. Contact an authorised service centre to  
Otherwise the device could overheat or catch fire.  
Protect the device against direct sunlight  
Protect the device against direct sunlight, heat, large  
temperature fluctuations and moisture. Do not place  
the device in the vicinity of heaters or air conditioners.  
Observe the information on temperature and humidity  
replace the battery.  
Do not replace the battery yourself  
Do not try to replace the battery yourself. Incorrect  
handling of the battery or using the wrong type of bat-  
in the technical data.  
tery can cause damage to the device or cause injury.  
Do not allow liquids to enter into the device. (switch off)  
On/off switch, general (power supply)  
Do not allow liquids to enter into the device. Switch off  
the device and disconnect it from the mains supply if liq-  
uids or foreign substances end up inside the device.  
Have the unit inspected by a technical service depart-  
Switch the device on or off using the power switch  
before removing the power supply from the socket.  
Turn off the device before cleaning the surface  
Turn off the device and remove it from the power sup-  
ply before cleaning the surface. Use a soft, lint-free  
cloth. Never use liquid, gaseous or easily flammable  
cleansers (sprays, abrasives, polishes, alcohol). Do not  
allow any moisture to reach the interior of the device.  
ment.  
Lens  
Always handle the unit with care. Avoid touching the  
lens. Never place heavy or sharp objects on the projec-  
tor or the power cable.  
If the device overheats or emits smoke (switch off)  
DANGER!  
If the projector gets too hot or emits smoke, shut it  
down immediately and unplug the power cable. Have  
your device examined by trained professionals at a tech-  
nical service location. To prevent the spread of fire,  
High Power LED  
This device is equipped with an high power  
LED (Light Emitting Diode), which emits very  
bright light. Do not stare directly into the pro-  
jector lens to avoid eye irritation or injury.  
open flames should be kept away from the device.  
Moisture build-up  
Under the following conditions, a layer of moisture can  
appear inside the device which can lead to malfunctions:  
· if the device is moved from a cold to a warm area;  
· after a cold room is heated;  
· when this device is placed in a damp room.  
Proceed as follows to avoid any moisture build-up:  
1 Seal this device in a plastic bag before moving it to  
another room, in order for it to adapt to room con-  
ditions.  
2 Wait one to two hours before you take the device  
out of the plastic bag.  
The device should not be used in  
a
very dusty environment.  
The device should not be used in a very dusty environ-  
ment. Dust particles and other foreign objects may  
damage the unit.  
Do not expose the device to extreme vibrations  
Do not expose the device to extreme vibrations. It may  
damage the internal components.  
4
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2 Overview  
EN  
Top of the Device  
Bottom of the Device  
‚ À/Á, ¡/¢, à—Navigation keys / OK key -  
Tripod socket  
Navigate the menu, modify settings / Confirm entry  
ƒFold-out base  
PicoPix P3 Bottom  
ƒ—Focus wheel for image sharpness. Please pay atten-  
tion to the distance from the projection surface. Mini-  
mum 0,2m maximum 3m. If the Pocket Projector is  
located outside of this range, it will not be possible to  
focus the image. Turn the focus wheel carefully so as to  
avoid damaging the lens.  
¿—One menu step back / cancelling a function  
ON / OFF—On/Off switch  
—Battery status monitor: Red: battery empty,  
Green: battery fully charged  
Charge indicator with connected power supply: Red:  
battery empty, Green: battery fully charged  
DC IN—Power supply connection  
ˆA/V—Audio/video input jack (composite / CVBS) –  
Connection of a playback device with audio/video out-  
put  
VGA / YPbPr—Component input (YUV/YPbPr) /  
VGA input – Connection of a playback device with com-  
ponent (YUV/YPbPr) output or a computer (VGA  
audio) for image playback  
ŠÏ—Audio output – headphone connection or con-  
nection for external speakers  
P2 oben  
Overview  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3 Initial Operation  
EN  
Connect power supply /  
charge battery  
Initial Installation  
1 Switch the device on using the on/off switch on the  
side.  
CAUTION!  
2 Turn the device towards an appropriate projection  
surface or wall at a distance of at least 0,2m and at  
most 3m. Make sure the projector is in a secure  
position.  
Mains Voltage at the Site of Installation!  
Check whether the mains voltage of the  
power supply matches the mains voltage avail-  
able at the setup location.  
3 Use the focus wheel on the top to adjust the image  
sharpness.  
1 Insert the small plug of the power supply into the  
4 Select the desired menu language using ¡/¢.  
5 Confirm with à.  
socket on the rear side of your device.  
2 Plug the power supply into the mains.  
Notice  
3 During the charging process, the indicator light on  
the top of the device will be red. When the battery  
is fully charged, it will turn green.  
The language selection does not ap-  
pear  
The device has already been installed. In  
order to change the menu language, pro-  
ceed as follows:  
4 Charge the built-in battery before using for the first  
time for at least 3 hours. This will prolong, the life of  
the battery.  
1 Press à.  
2 Select using ¡/¢Language.  
3 Confirm using à.  
4 Select the desired language with ¡/¢.  
5 Confirm with à.  
6 You can exit with ¿.  
6
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 Connect to the playback device  
EN  
Only use the supplied cable or cables that are available  
Connecting using  
as accessories to connect the projector.  
Component-Video (YPbPr/  
YUV) Cable  
Supplied Cables  
Video-(CVBS) cable  
Cables available as Accessories  
Please use this type of connection to get the highest  
possible quality of image. This cable is available as an  
accessory. The device jacks have the colours green (Y),  
blue (U/Pb), red (V/Pr) for the video signal and red  
Component Video Cable YUV /YPbPr  
.................................................(PPA 1110 / 253372492)  
VGA-Audiocable ......................(PPA 1150 / 253372489)  
iPod / iPhone Cable .................(PPA 1160 / 253372471)  
(audio right) and white (audio left) for the audio signal.  
Component DVD Camcorer P2  
Connecting using Video  
(CVBS) Cable  
Use the projector's audio/video cable (AV cable) to  
connect camcorders, DVD players or digital cameras.  
The jacks for these devices are yellow (video), red  
(audio right) and white (audio left).  
CompoDVD Camorer P2  
1 Connect the video component cable (accessory) to  
the VGA / YPbPr socket of the projector.  
2 Connect the video device's appropriate colored  
sockets to the component video cable of the projec-  
tor using a conventional component video (RCA)  
cable.  
Notice  
1 Connect the supplied AV cable to the A/Vsocket of  
Two red phono (RCA) connectors  
the projector.  
When connecting, note that there are two  
red phono (RCA) connectors on the cable.  
One is for the right audio signal and the  
other for the V/Pr element of the compo-  
nent video signal. If these two connectors  
are inserted incorrectly, the projected  
image appears green and the audio signal  
for the right speaker will not work.  
2 Connect the video device's audio/video jacks to the  
AV cable using a conventional composite video  
(RCA) cable.  
Connecting to mobile multimedia devices  
Connecting to mobile multimedia devices  
Some video devices (e.g.: pocket multimedia players, ...)  
require specific connection cables. There are either  
supplied with the device or acquired from the manufac-  
turer of the multimedia device. Please note that only the  
original cables from the device manufacturer may func-  
tion.  
Composte Mobie Devce P2  
Signal output, multimedia devices  
Notice  
Switching to the multimedia device sig-  
nal output  
See the multimedia device instruction manual  
to find out how to switch the signal output to  
this jack.  
Connect to the playback device  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting to mobile multimedia devices  
Connecting to a Computer  
(VGA)  
Connecting to mobile multimedia devices  
Some video devices (e.g.: pocket multimedia players, ...)  
require specific connection cables. There are either  
supplied with the device or acquired from the manufac-  
turer of the multimedia device. Please note that only the  
original cables from the device manufacturer may func-  
EN  
Use the VGA audio cable (accessory) to connect the  
projector to a computer, laptop or some PDAs. The  
projector supports the following resolutions: VGA/  
SVGA/XGA . For best results, set the computer's reso-  
tion.  
Component Mobile Device P2  
lution to SVGA (800x600).  
Lpop VGA P2  
Signal output, multimedia devices  
Notice  
Switching to the multimedia device sig-  
nal output  
See the multimedia device instruction manual  
to find out how to switch the signal output to  
this jack.  
1 Connect the VGA audio cable to the VGA / YPbPr  
socket of the projector.  
2 Connect the VGA plug to the computer's VGA  
socket and the audio plug to the computer's audio  
output.  
3 Adjust the computer's resolution to the correct set-  
ting and switch the VGA signal to an external moni-  
tor.  
4 The following resolutions are supported:  
Resolution  
Image  
refresh rate  
VGA  
SVGA  
XGA  
640 x 480  
800 x 600  
1024 x 768  
60 Hz  
60 Hz  
60 Hz  
8
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Video playback  
EN  
1 Connect the audio/video output of the external  
device to the A/Vor VGA / YPbPr socket of the  
Pocket Projector. Use the corresponding cable and  
cable adapter for this purpose.  
Notice  
Both jacks occupied  
If both sockets on the Pocket Projector  
are occupied, only the signal from the A/V  
socket will be played. In order to play the  
signal from the VGA / YPbPr socket, you  
have to remove the cable from the A/V  
socket.  
2 To find out how to deactivate the video output for  
the external device, please see the relevant instruc-  
tion manual. Most often, this option is labeled "TV  
out" or "TV Output" in the corresponding menu.  
3 Start the video playback on the external device.  
4 Modify the volume with À/ Á.  
Modify settings during playback  
1 Press the ¡or ¢key.  
2 Use the ¡/¢ keys to choose from the following  
settings:  
Brightness: Adjust brightness  
Contrast: Adjust contrast  
Saturation: Adjust colour saturation  
Smart Settings: Select predefined settings for  
brightness / contrast / colour saturation  
Volume: Adjust volume level  
3 Modify the setting using À/Á.  
The device saves the modified settings automatically.  
Video playback  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Settings  
EN  
1 Press the button à.  
2 Use ¡/¢to choose from the following settings.  
3 Confirm with à.  
4 Modify the settings with À/Á. The ¿ key takes  
you one step back in the menu.  
Language  
Select the desired language for the menu.  
Image Settings  
Smart Settings – Select predefined settings for bright-  
ness / contrast / colour saturation  
Brightness—Adjust brightness  
Contrast— Adjust contrast  
Saturation—Adjust colour saturation  
Sound Settings  
Volume—Adjust volume level  
Bass—Set the playback of the low frequencies  
Treble—Set the playback of the high frequencies  
Power Save  
This function reduces the light output in order to  
increase the operating time for the built-in battery.  
When operating from the power supply, Power Save is  
always deactivated in order to ensure the best possible  
image display.  
Information  
Display information of the device  
Reset settings  
Reset settings to factory defaults.  
10  
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 Service  
EN  
Care Instructions for the  
Battery  
Cleaning  
DANGER!  
The capacity of the battery diminishes with time. You  
can prolong the life of the battery if you observe the fol-  
lowing points:  
Switching off the device!  
Switch the device on or off using the power  
switch before removing the power supply  
from the socket.  
Use the device at least once a week.  
Charge the battery regularly. Don’t store the device  
with a completely discharged battery.  
Cleaning  
DANGER!  
If the device is not used for several weeks, discharge the  
battery a little by using the device before storing it.  
If the device only works using the USB connection or  
with the power supply, the battery is defective.  
Keep the device and the battery away from heat  
sources.  
Instructions for Cleaning!  
Use a soft, lint-free cloth. Never use liquid or  
easily flammable cleansers (sprays, abrasives,  
polishes, alcohol, etc.). Do not allow any  
moisture to reach the interior of the device.  
Do not spray the device with any cleaning flu-  
ids.  
DANGER!  
Do not replace the battery yourself  
Wipe over the surfaces gently. Be careful that  
you do not scratch the surfaces.  
Do not try to replace the battery yourself.  
Incorrect handling of the battery or using the  
wrong type of battery can cause damage to  
the device or cause injury.  
Cleaning the Lens  
Use a brush or lens cleaning paper for cleaning the lens  
of the projector.  
DANGER!  
Do not use any liquid cleaning agents  
Do not use any liquid cleaning agents for  
cleaning the lens, to avoid damaging the coat-  
ing film on the lens.  
Service  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1 Switch the device off using the on/off switch on the  
side.  
Troubleshooting  
EN  
2 Wait at least ten seconds.  
Power Cycling  
If a problem occurs that cannot be corrected with the  
instructions in this user manual (see also the help  
below), follow the steps given here.  
3 Switch the device on using the on/off switch on the  
side.  
4 If the problem repeats, please contact our technical  
customer service or your retailer.  
Problems  
Solutions  
The Pocket Projector cannot be switched on  
Connect the supplied power supply to recharge the  
internal battery.  
No sound  
Adjust the volume using the À/ Á.  
No sound from the external connected device  
Check the cables to the external device  
Set the volume on the external device  
Only the original cables from the device manufac-  
turer may function  
Bad sound quality with your computer connection  
Check if the audio cable is connected to the comput-  
ers headphone socket or the line-out socket.  
The volume setting on the computer should not be  
too high.  
Only the initial screen appears and not the image from  
the external device  
Check if the cables are connected to the right sock-  
ets.  
Please check that the external device is switched on  
Check if the video output of the external device is  
switched on.  
Only the initial screen appears and not the image from  
the connected computer  
Please check that the VGA-output of the computer  
is switched on.  
Check if the resolution of the computer is set to  
800x600.  
12  
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8 Appendix  
EN  
ing the environment. The desire of Sagemcom is to  
operate systems observing the environment and conse-  
quently it has decided to integrate environmental per-  
formances in the life cycle of this products, from manu-  
facturing to commissioning use and elimination.  
Technical Data  
Dimensions  
Dimensions (L¦×¦H¦×¦W).......................100¦×¦32¦×¦100¦mm  
Weight  
Weight..........................................................................0,28¦kg  
Recommended Ambient  
Recommended Ambient........................................5¦–¦40¦ºC  
Relative Humidity  
Relative Humidity..................20¦–¦80¦% (non-condensing)  
Video Standard (CVBS)................... PAL, SECAM, NTSC  
Video Standard (YPbPr)....... 480i/p, 576i/p, 720p, 1080i  
Headphone connection..........Stereo - jack plug: 3,5¦mm  
Audio Output  
Audio Output..........................................................2¦x¦0,3¦W  
Packaging: The presence of the logo (green dot)  
means that a contribution is paid to an approved  
national organisation to improve package recovery and  
recycling infrastructures to facilitate. Please respect the  
sorting rules set up locally for this kind of waste.  
Technology / Optical  
Display technology.............................................0,37" LCoS  
Light source........................................................... RGB LED  
Resolution......................................................800¦x¦600¦pixel  
Supported Resolutions..........................VGA/SVGA/XGA  
Brightness (Bright Mode)...........................up to 30¦lumen  
Contrast ratio............................................................... 400:1  
Projected image size.........................................5,2¦–¦81¦inch  
Screen distance...........................................0,2¦m up to 3¦m  
Horizontal Scan Rate.........................................31¦–¦69¦kHz  
Vertical Scan Rate ................................................56¦–¦85¦Hz  
Batteries:If your product contains batteries, they must  
be disposed of at appropriate collection points.  
Power supply  
Power supply Manufacturer  
Manufacturer............................. Wanlida Group Co., Ltd.  
Product: The crossed-out waste bin stuck on the  
product means that the product belongs to the family of  
electrical and electronic equipment. In this respect, the  
European regulations ask you to dispose of it selectively;  
Power supply Type  
Model No................................................................MPA-630  
Input  
Input ............................................ 100¦–¦240¦V¦~ / 50¦/¦60¦Hz  
Output  
Output .............................................................. 12¦V¦† / 2¦A  
Built-in rechargeable battery  
• At sales points in the event of the purchase of similar  
equipment.  
Battery type  
Battery type.................................................................... LiPol  
Battery recharging time  
Charging time..................................................................... 3¦h  
Battery operating time  
• At the collection points made available to you  
locally(drop-off centre, selective collection, etc.).  
Operating time................................................................2,5¦h  
Operating time (Power Save switched on).................3¦h  
In this way you can participate in the re-use and upgrad-  
ing of Electrical and Electronic Equipment Waste, which  
can have an effect on the environment and human  
health.  
Accessories  
Following accessories are available for your device:  
YUV /YPbPr Adaptercable .........PPA 1110 / 253372492  
VGA-Audiocable...........................PPA 1150 / 253372489  
iPod / iPhone Cable .....................PPA 1160 / 253372471  
The paper and cardboard packaging used can be dis-  
posed of as recyclable paper. Have the plastic wrapping  
and Styrofoam packaging recycled or dispose of it in the  
non-recyclable waste, depending on the requirements  
in your country.  
All data are provided for reference purposes only.  
Sagemcom reserves the right to make any changes  
without prior notice.  
Trademarks: The references mentioned in this man-  
ual are trademarks of the respective companies. The  
lack of the trademarks É and Ë does not justify the  
assumption that these dedicated terminologies are free  
trademarks. Other product names used herein are for  
identification purposes only and may be trademarks of  
their respective owners. Sagemcom disclaims any and all  
rights in those marks.  
The CE marking certifies that the product meets the  
main requirements of the European Parliament and  
Council directive 1999/5/CE on telecommunications  
terminal equipment, regarding safety and health of users  
and regarding electromagnetic interference.  
Neither Sagemcom nor its affiliates shall be liable to the  
purchaser of this product or third parties for damages,  
losses, costs, or expenses incurred by the purchaser or  
third parties as a result of accident, misuse, or abuse of  
this product or unauthorized modifications, repairs, or  
alterations to this product, or failure to strictly comply  
with Sagemcom operating and maintenance instruc-  
tions.  
The declaration of compliance can be consulted on the  
Preservation of the environment as part of a sustainable  
development logic is an essential concern of Sagemcom.  
The desire of Sagemcom is to operate systems observ-  
Appendix  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sagemcom shall not be liable for any damages or prob-  
lems arising from the use of any options or any consum-  
able materials other than those designated as original  
Sagemcom / PHILIPS products or Sagemcom / PHILIPS  
approved products.  
EN  
Sagemcom shall not be held liable for any damage result-  
ing from electromagnetic interference that occurs from  
the use of any interface cables other than those desig-  
nated as Sagemcom or PHILIPS products.  
All rights reserved. No part of this publication may be  
reproduced, stored in a retrieval system or transmitted  
in any form or by any means, electronic, mechanical,  
photocopying, recording, or otherwise, without the  
prior written permission of Sagemcom. The information  
contained herein is designed only for use with this prod-  
uct. Sagemcom is not responsible, if this information is  
applied to other devices.  
This user manual is a document that does not represent  
a contract.  
Errors, printing errors and changes are reserved.  
Copyright È Sagemcom Austria GmbH  
14  
Philips · PPX1230  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Appendix  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.  
and are used by Sagemcom under license from Koninklijke Philips Electronics N.V.  
È2010 Sagemcom Austria GmbH  
All rights reserved  
Sagemcom Documents SAS  
Documents Business Unit  
Headquarters : 250, route de l’Empereur  
92500 Rueil-Malmaison Cedex · FRANCE  
Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01  
PPX1230  
EN  
253383586-A  
Simplified Joint Stock Company · Capital 8.479.978 € · 509 448 841 RCS Nanterre  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Baby Monitor SCD590 User Manual
Philips DVD Player DVD727 17 User Manual
Philips Electric Shaver 1059X User Manual
Philips Flat Panel Television 170A8FS User Manual
Philips MP3 Docking Station AJ300D 05 User Manual
Philips Stereo Amplifier TDA7057AQ User Manual
Planar Computer Monitor ND1750 User Manual
Poulan Trimmer 115270226 User Manual
Pride Mobility Mobility Aid INFMANU4206 User Manual
PYLE Audio CRT Television PLVWR750T User Manual