QUICK-USE GUIDE
There are many ways to connect your new DVD Player to yourTelevision and other equipment.This
Quick-Use Guide shows the easiest, most common connection between the DVD Player and aTV using
the supplied cables. Higher quality connections are explained in the accompanying owner’s manual and
will provide better sound or picture if yourTV and/or audio system is compatible.
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
4
VIDEO IN
3
2
Disconnect all equipment from the power outlets. Connect the equipment to the
power outlets only after you have finished hooking up everything. Never make or change con-
nections with equipment connected to the power outlet.
1
2
3
Connect the Player’s yellowVIDEO (VIDEO OUT) jack to the correspondingVIDEO
IN jack on yourTV. Use the supplied video cable, which has yellow ends. On the TV, the
Video In jack is usually yellow and might be labeled video, CVBS, composite, or baseband.
Connect the supplied audio cable to the AUDIO OUT (left and right) jacks on the
DVD Player and to the left/right AUDIO IN jacks on theTV. The supplied audio cable
has red and white ends. Match the cable colors to the jack colors. On the TV, the Audio In jacks
are usually labeled Audio. The red jack is the right (stereo channel) and the white jack is the left
(stereo channel).
Plug the power cords of the DVD Player and theTV into an active power outlet.
Press STANDBY-ON y on the front of the Player to turn it on.
4
5
Turn on theTV power and set it to the correctVideo In channel. Such channels may
be called AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.
These channels are often near channel 00, or your TV’s remote may have a button or switch
that selects aVideo channel. See your TV manual for details. Or, go to your lowest TV channel
(01 or 02), then change TV channels downward until you see the blue DVD screen on the TV.
Remember...
G Connect the DVD Player directly to the TV. For example, do not connect the Player to aVCR, then
connect theVCR to a TV. This type of connection may distort the picture and sound or give you a
black and white picture. Also, yourVCR might have the copy protection system, which could distort
the DVD image or prevent playback of some Discs.
G If yourTV does not have red, white, and yellow Audio andVideo In jacks, see the DVD
Player’s owner’s manual for other hookup options. If yourTV only has a single Antenna
In or RF In jack, you will need an RF modulator. See the owner’s manual for details.
G If a DVD does not play properly, please contact Philips at 1-800-531-0039 for assistance. Due to the
inconsistency of Disc formats provided by various Disc manufacturers, your DVD Player may require
a playability enhancement. As DVD technology has advanced, these enhancements have become
both common and easy to complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
|