ProjectionTelevision
43”/50”/ 55’’
Instructions for Use
43PP925
50PP925
55PP925
3135 015 22191
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRO DUCTIO N
Thank you for purchasing this television set. You are now the proud owner of a PHILIPS TV
set, which promises full value to you as a customer. Please read the instruction manual carefully
and thoroughly to help you install and operate your TV set.
TABLE O F CO NTENTS
SAFETY INFO RMATIO N/USEFUL TIPS ....................................................................... 3
BEFO RE CALLING SERVICE ...................................................................................... 3
INSTALLATIO N ....................................................................................................... 4
CO NNECTING THE AUDIO/VIDEO SO CKETS
Playback .....................................................................................................................................5–6
Recording ...................................................................................................................................... 7
EXTERNAL SPEAKER CO NNECTIO NS .................................................................... 8–9
FUNCTIO NS O F REMO TE CO NTRO L ................................................................. 10–11
FUNCTIO NS O F TV CO NTRO LS ...................................................................... 12–13
SELECTING THE MENU LANGUAGE, TUNER MO DE
AND AUTO MATIC TUNING O F CHANNELS .............................................................. 14
FINE TUNING O F CHANNELS ................................................................................ 15
EDITING O F CHANNELS ........................................................................................ 16
NAMING O F CHANNELS ........................................................................................ 17
USING THE PICTURE MENU .................................................................................. 18
USING THE SO UND MENU .................................................................................... 19
CO NVERGENCE
Converge Red/Blue ................................................................................................................... 20
Multipoint Red/Blue ...........................................................................................................21–22
Undo Multipoint ........................................................................................................................ 23
ACTIVATING THE TIMER ................................................................................. 24–25
ACTIVATING THE CHILD LO CK
Access Code ............................................................................................................................... 26
Change Code .............................................................................................................................. 27
Lock Channel.............................................................................................................................. 28
Clear All....................................................................................................................................... 29
USING THE CLO SED CAPTIO NING CO NTRO L ................................................... 30–31
USING THE SURF CO NTRO L ................................................................................. 32
ACTIVATING THE BLUE MUTE CO NTRO L .............................................................. 33
USING THE PRO GRAM LIST FEATURE .................................................................... 33
SMART PICTURE AND SMART SO UND .................................................................... 34
ACTIVATING THE PIP (PICTURE-IN-PICTURE)
AND DO UBLE W INDO W CO NTRO L ................................................................. 35–37
SPECIFICATIO NS ................................................................................................... 38
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFO RMATIO N/USEFUL TIPS
Safety
Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slightly damp chamois
leather or soft cloth.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
Useful Tips
• Do not place your TV set under direct sunlight or heat.
• Avoid placing your set (e.g., near the window) where it is likely to be exposed to rain
or water.
• Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled service person.
BEFO RE CALLING SERVICE
Below is a list of frequently occurring symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Sym ptom
W hat you should do
Colour patch
(uneveness)
• Switch off the TV by the mains power button. Wait for 20
minutes before switching on again.
• Check the TV is not placed too near speakers or magnetic
objects.
No power
No picture
• Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem. Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
mute button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
Snowish picture and
noise
• Check antenna connection at the rear of the TV.
Horizontal dotted lines
• Possible electrical interference (e.g., hairdryer, vacuum
cleaner). Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on the TV.
Download from Www.Somanuals.com.3All Manuals Search And Download.
INSTALLATIO N
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
5 cm
5 cm
withstand the weight of the set.
5 cm
• Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
• Do not place TV set near a radiator or other sources of
heat.
• Do not place TV set where it can be exposed to rain or
excesssive moisture.
Connecting the Aerial
• Insert the aerial plug into the socket
at the rear of
the set.
Connecting to the m ains
• Insert the mains plug into the wall socket. (For correct
mains voltage, refer to the type sticker at the rear of the
set.)
Note : This diagram is not representative of the actual
plug and socket.
Using the Rem ote Control
Battery Usage CAUTION - To prevent battery leakage
which may result in bodily injury or damage to the remote:
• Install ALL batteries correctly, + and - as marked on the
remote control.
• Do not mix batteries: (OLD and NEW or CARBON and
ALKALINE, etc.).
• Remove batteries when the remote is not used for a long
time.
Switching on the TV set
• Press the mains power button to switch on/off the TV set.
• If the set is on standby mode (indicator light is red), press
the Standby button on the remote control to switch on set.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NNECTING THE AUDIO /VIDEO SO CKETS (PLAYBACK)
AV sockets
on rear of
TV
OUT
ANTENNA
IN
OUT
OUT
Back of
VCR
VIDEO
IN
L
R
AUDIO
IN
VCR (Equipped with
Video and Audio Output
sockets)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
and VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and
VIDEO O UT sockets on the VCR.
AV sockets
on rear of
TV
OUT
OUT
VIDEO
IN
OUT
OUT
ANTENNA
IN
Back of S-VHS
VCR
L
R
AUDIO
IN
S-VIDEO
The S-Video connection on the rear of the TV is used for the playback of S-VHS VCR tapes, Video
Discs, Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is
possible with the S-Video playback as compared to the picture from a normal antenna (RF)
connection.
– Connect the S-VIDEO socket on the rear of the TV to the S-VHS O UT socket on a
S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of the TV to the AUDIO O UT sockets
on the VCR.
Note: You need not connect the VIDEO IN socket of the TV if S-VIDEO IN socket is
connected.
Download from Www.Somanuals.com.5All Manuals Search And Download.
CO NNECTING THE AUDIO/VIDEO SO CKETS (PLAYBACK)
AV sockets
on side of
TV
Camcorder
Connect the headphone cable
to the headphone socket for
personal listening
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape recordings.
– Connect the S-VIDEO socket (if available) from the Camcorder to the Side S-VIDEO
socket of the TV. You need not connect the Side VIDEO IN socket of the TV if the
S-VIDEO socket is connected.
– Connect the AUDIO O UT sockets (Right and Left) from the Camcorder to the Side
AUDIO IN sockets.
AV sockets
on rear of
TV
OUT
OUT
Back of DVD
Pb
Y
Pr
L
AUDIO
R
DVD (Equipped with “Y”,
“Pb” and “Pr” and Output
sockets)
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the
rear of the TV.
– Connect the “Y,” “Pb” and the “Pr” INPUT sockets on the TV to the “Y,” “Pb” and
“Pr” O UTPUT sockets on the DVD to view playback of DVD discs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NNECTING THE AUDIO /VIDEO SO CKETS (RECO RDING)
Connection for recording from the TV channel
AV sockets
on rear of
TV
OUT
OUT
VIDEO
IN
OUT
ANTENNA
L
R
AUDIO
IN
IN
VCR (Equipped with Video
and Audio Input sockets)
– Connect the corresponding INPUT sockets of the VCR to the MO NITO R O UTPUT
sockets on the rear of the TV.
– To enhance the sound of your TV, connect the AUDIO L and R sockets to an external
audio system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
AV sockets on
rear of TV
OUT
ANTENNA
IN
OUT
OUT
OUT
ANTENNA
IN
OUT
OUT
VCR (Equipped with
Video and Audio
Output sockets)
VIDEO
IN
L
R
AUDIO
IN
VIDEO
L
R
AUDIO
VCR 2
VCR 1
VCR (Equipped with Video
and Audio Input sockets)
– Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2.
– Connect the sockets of the receiving VCR to the MO NITO R O UTPUT sockets on the
rear of the TV.
Download from Www.Somanuals.com.7All Manuals Search And Download.
EXTERNAL SPEAKER CO NNECTIO NS
Center Channel Am p Input
Center Speakers
Front
TV
Rear of
TV
Front
Speaker
Speaker
Rear Surround
Sound Speakers
Front Speakers
+
-
+
-
Powered
Subwoofer
Rear
Speaker
Rear
Speaker
Primary Viewing Area
Back of a Receiver with Dolby Pro Logic or Dolby Digital
By adding an external audio system, you can create the feeling of reflected sound that surrounds you at
a movie theater or concert hall.
– Connect the corresponding O UTPUT sockets of a receiver with Dolby Pro Logic* or
Dolby Digital to the CENTER CHANNEL AMP INPUT sockets on the rear of the TV.
– Connect the corresponding INPUT sockets of the receiver to the AUDIO L and R
sockets on the rear of the TV.
– Connect the front speakers and the rear surround sound speakers to the receiver.
Note
• To use a receiver with Dolby Pro Logic or Dolby Digital with your TV, the TV’s AUDIO
O UT control must be set to “FIXED.” (Refer to the sections on “Using the Picture
Menu” and “Using the Sound Menu.”)
• You must have the AMP SW ITCH on the rear of the TV in the EXT position for the
center channel speakers to operate.
*“Dolby,” “Pro Logic,” and the double-D symbol
are trademarks of Dolby Laboratories.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL SPEAKER CO NNECTIO NS (CO NTINUED)
External Powered Subwoofer Connection
-180o
Phase
0o
1
10
90
Crossover
Frequency
150 Hz
Back of
TV
Volume
Back of
Powered
Subwoofer
L
R
Low
Level
Input
High
Level
Input
+
R
–
–
L
+
High
Level
Output
Powered
Subwoofer
– Connect the INPUT sockets of a powered subwoofer to the SUBW O O FER socket on
the rear of the TV. You can use a y-shaped cable to make the connection. You can also use
a single cable and connect to either the R or L Low Level Input sockets.
Note
• If you use a single cable to make the connection to the powered subwoofer, you will need
to increase the volume on the back of the subwoofer to compensate for the absence of the
second cable.
• The powered subwoofer trim must be adjusted from the external powered subwoofer.
Download from Www.Somanuals.com.9All Manuals Search And Download.
FUNCTIO NS O F REMO TE CO NTRO L
1
SLEEP
Allows you to select a time period after which the
set will switch to standby mode automatically.
1
2
2
OSD
–
Displays the channel number, sound and colour
transmission mode, status of the sleeptimer,
channel name (if channel is named) and the
current time (if current time is being entered in
the Timer menu).
3
4
–
Also allows you to exit menu from screen.
3
AV
Allows you to select the AV channels.
5
4
5
DIGIT (0-9)
6
7
8
Allows you select a channel. Note : For a 2-digit
number, the second digit must be entered before
the “–” sign disappears.
SMART SOUND
Allows you to select your desired sound setting
from 4 types of sound settings.
9
6
7
8
MENU
Displays main menu. Also exits menu from screen.
10
11
CURSOR UP
Allows you to select the next item on the menu.
12
CURSOR LEFT
Allows you to access the sub-menus and adjust
the settings.
9
VOLUME + / –
Increases or decreases volume.
10 A/CH
Allows you to alternate between the last viewed
channel and the present channel.
11 VIRTUAL DOLBY SURROUND*
–
Allows you to select Stereo, Incredible Surround,
or Virtual Dolby Surround sound when transmission
is in Stereo.
Note: Selecting Virtual Dolby Surround will allow
you to enjoy the sensation of Home Cinema
surround sound with just 2 front speakers.
Allows you to select Spatial or Mono when
transmission is in Mono.
–
12 STEREO/SAP
–
Allows you to select Stereo or Mono when
transmission is in Stereo.
Allows you to select Dual5or Dual 6
during dual sound transmission.
–
*Manufactured under license from Dolby Laboratories.
“Dolby,” “Virtual Dolby Surround” and the double-D symbol
of Dolby Laboratories.
are trademarks
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIO NS O F REMO TE CO NTRO L
13 STANDBY
–
Switch set off temporarily to standby mode.
13
(The red light indicator lights up when set is
in standby mode.)
14
15
–
To switch on set from standby mode, press
Channel Up/Down, Digit (0-9) or Standby
button.
14 CC (Closed Captioning) Button
Allows the hearing impaired to read the voice
content of television programs when “ON”
option is selected. To select your desired
caption mode, refer to the section on “Using
the Closed Captioning Control.”
16
17
15 TIMER
Allows you to set the clock to switch to
another channel at a specified time while you
are watching a channel or when the set
is in standby mode.
18
19
20
16 SMART PICTURE
Allows you to select your desired picture setting
from 5 types of picture settings.
21
22
23
17 SURF
Allows you to select up to a maximum of 10
channels and view quickly the selected channels.
18 CURSOR RIGHT
24
Allows you to access the sub-menus and adjust
the settings.
19 CURSOR DOW N
Allows you to select the next item on the menu.
20 CHANNEL + / –
Selects channel in ascending or descending order.
21 MUTE
Mutes sound. To restore sound, press button
again.
22 PROGRAM LIST
Allows you to navigate through a list of installed
programmes for a quick overview of the channels
and activate the channel you have selected.
23 INCREDIBLE PICTURE
Allows you to view a more vivid and realistic
picture with better contrast when the “ON”
function is selected.
24 PIP
Allows you to access the Picture-in-Picture and
Double Window features. (For more detailed
description of functions, refer to section on
“Activating the PIP and Double Window
Control.”)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIO NS O F TV CO NTRO LS (43PP925)
VOL
CH
MONO
AUTO
6
MENU
6
5
2
9
8
7
4
3
1
1
Mains Power button
Switch mains power on or off.
Switch TV on or activate standby mode.
2
3
4
5
6
7
8
Power/Standby button
Standby Light Indicator Indicates red light when standby mode is activated.
Source Select button
Cycle through the signal sources.
Select channel in ascending order.
Select channel in descending order.
Adjust the sound volume louder.
Channel
Channel
Volum e
Volum e
button
button
button
button
Adjust the sound volume softer.
Note
•You can enter the main menu by pressing both the
Volum e
and
buttons at the same time.
•Press the Channel
next item on the menu.
•Press the Volum e
or
button to select the
or
button to access the
sub-menus and adjust the settings.
9
Rem ote Sensor
Acts as a sensor for activating the controls of the TV
when the remote control handset is aimed at it.
Note: When the Mains Power button has been pressed so that the TV is in Power/Standby
mode, you can press any of the TV’s other controls to turn the set on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIO NS O F TV CO NTRO LS (50PP925 AND 55PP925)
4
3
MONO
AUTO
6
9
7
MENU
MENU
V
O
L
CH
S
T
A
T
U
S
/
E
X
I
T
6
VOL
CH
2
SOURCE SELECT
5
1
8
10
1
Mains Power button
Switch mains power on or off.
Switch TV on or activate standby mode.
2
3
4
Power/Standby button
Standby Light Indicator Indicates red light when standby mode is activated.
Rem ote Sensor Acts as a sensor for activating the controls of the TV
when the remote control handset is aimed at it.
5
6
7
8
9
Volum e
button
Adjust sound volume softer.
Volum e
button
button
button
Adjust sound volume louder.
Channel
Channel
Menu button
Select channel in ascending order.
Select channel in descending order.
Display the main menu.
Note
• Press the Channel or
next item on the menu.
button to select the
button to access the
• Press the Volum e
or
sub-menus and adjust the settings.
10 Source Select button
Cycle through the signal sources.
Note: When the Mains Power button has been pressed so that the TV is in Power/Standby
mode, you can press any of the TV’s other controls to turn the set on.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE MENU LANGUAGE, TUNER MO DE
AND AUTO MATIC TUNING O F CHANNELS
Before you tune in the channels by the Auto Store method, select the desired menu language
and tuner mode. Note: The available menu languages will vary based on region.
MENU
1. Enter main menu.
É
•
PI CTURE
SOUND
BRI GHTNESS
COLOUR
CONTRAST
SHARPNESS
HUE
▼
•
•
•
FEATURES
I NSTALL
2. Press button repeatedly
until INSTALL is
selected.
•
•
•
PI CTURE
SOUND
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
FEATURES
▲
É
•
I NSTALL
3. Enter INSTALL menu.
I NSTALL
▲
Ñ
É
LANGUAGE
•
ENGLI SH
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
4. Enter LANGUAGE mode.
I NSTALL
▲
Ñ
LANGUAGE
•
É
ENGLI SH
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
5. Select desired language.
O R
▼
▼
6. Exit from language mode.
I NSTALL
▲
•
Ñ
•
•
LANGUAGE
É
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
•
AUTO
CABLE
ANTENNA
7. Select TUNER MO DE.
8. Enter TUNER MO DE
▲
I NSTALL
menu.
•
LANGUAGE
É
Ñ
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
•
AUTO
9. Select desired tuner mode
(AUTO , CABLE or
ANTENNA).
•
•
•
•
CABLE
ANTENNA
O R
I NSTALL
10. Exit tuner mode.
•
LANGUAGE
TUNER MODE
▲
•
ÑAUTO PROGRAM
11. Select AUTO PRO GRAM.
É
•
SEARCH
•
•
CHANNEL EDI T
MANUAL
12. Enter AUTO PRO GRAM
mode.
13. Start automatic tuning.
I NSTALL
▲
•
•
•
•
LANGUAGE
CABLE
É
TUNER MODE
AUTO PROGRAM
MANUAL
•
PLEASE WAI T
CHANNEL
2
OSD
▼
•
▼
14. When tuning is completed,
exit menu from screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FINE TUNING O F CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
I NSTALL
ENU
SURF
MENU
SURF
MENU
SURF
▲
Ñ
É
ENGLI SH
LANGUAGE
•
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
➠
➠
➠
▼
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter install menu.
4. Press button repeatedly
I NSTALL
until MANUAL is selected.
•
•
•
•
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
FI NE TUNE
STORE
▲
É
•
▼
•
5. Enter MANUAL menu.
I NSTALL
MANUAL
▲
6. Start fine-tuning until desired
picture and sound are obtained.
Ñ
FI NE TUNE
STORE
É 0
O R
•
I NSTALL
MANUAL
7. Select STO RE.
▲
•
FI NE TUNE
STORE
É
Ñ
•
8. Store last fine-tuned status.
I NSTALL
▲
MANUAL STORE
•
FI NE TUNE
Ñ STORE
É
•
STORED
I NSTALL
MANUAL
FI NE TUNE
STORE
▲
•
É
Ñ
•
OSD
9. Exit menu from screen.
Download from Www.Somanuals.com1. A5ll Manuals Search And Download.
EDITING O F CHANNELS
This feature allows you to edit or skip channels which have bad or weak TV signal or channels
that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or –
button. You can only access the channel by the DIGIT (0-9) button.
I NSTALL
▲
MENU
SURF
NU
SURF
Ñ
É
ENGLI SH
MENU
SURF
LANGUAGE
•
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
➠
➠
➠
▼
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
4. Press button repeatedly
I NSTALL
▲
until CHANNEL EDIT
is selected.
•
•
•
Ñ
•
•
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
3
4
5
6
7
É
•
▼
▼
5. Enter channel edit
mode.
6. Select the channel you
want to skip.
I NSTALL
▲
•
•
•
LANGUAGE
3
4
5
É 6
7
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
O R
Ñ
•
•
•
▼
▼
I NSTALL
7. Activate skipped mode.
8. Exit menu from screen.
▲
•
•
•
LANGUAGE
3
4
5
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
•
É 6 SKI PPED
7
Ñ
OSD
•
•
▼
▼
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels.”
• Select the channel you want to add back by the
(CURSO R UP) or
(CURSO R
DO W N) button.
• Press the
(CURSO R RIGHT) button to activate adding back of channel.
OSD
• Exit menu from screen by the
(O SD) button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMING O F CHANNELS
This feature allows a selection of 50 pre-defined names. It also allows you to enter a new name
or modify an existing name according to your personal preference.
I NSTALL
▲
ENU
SURF
MENU
SURF
MENU
SURF
Ñ
É
ENGLI SH
LANGUAGE
•
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
➠
➠
➠
▼
▼
1. Enter main menu.
2. Select INSTALL.
3. Enter install mode.
I NSTALL
▲
▲
4. Press button repeatedly
•
• TUNER MODE
until NAME is highlighted.
• AUTO PROGRAM
•
CHANNEL EDI T
• MANUAL
É
Ñ
NAME
•
PERSONAL
5. Enter NAME mode.
I NSTALL
▲
▲
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
6. Select desired preset name
•
•
•
and press
(CURSO R
O R
RIGHT) button to store
É
Ñ
NAME
•
PERSONAL
selected pre-set name.
I NSTALL
▲
▲
7. If you select PERSO NAL,
•
• TUNER MODE
move to first character slot
• AUTO PROGRAM
•
CHANNEL EDI T
• MANUAL
É
Ñ
NAME
•
_
8. Press button repeatedly
to cycle through the
characters and select
desired character.
I NSTALL
▲
▲
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
O R
É
Ñ
NAME
•
LUCKY
Move to next character
slot by the
(CURSO R
RIGHT) button and select
in the next character.
(You can enter up to a
maximum of 5 characters.)
I NSTALL
▲
▲
•
•
•
•
•
TUNER MODE
AUTO PROGRAM
CHANNEL EDI T
MANUAL
É
Ñ
NAME
•
LUCKY
MENU
9. Store named channel.
OSD
10.Exit menu from screen.
Download from Www.Somanuals.com1. A7ll Manuals Search And Download.
USING THE PICTURE MENU
The picture menu allows you to make adjustments to the picture. It also allows you to select
and activate other features in the menu.
MENU
1. Press the
2. Press the
3. Press the
(MENU) button to enter main menu.
(CURSO R RIGHT) button to enter the PICTURE menu.
or
(CURSO R UP/DO W N)buttons to select the items on the
PICTURE menu.
4. Press the or
(CURSO R LEFT/RIGHT) buttons to adjust or change settings.
Note: To enter the CO NVERGENCE sub-menu, select CO NVERGENCE and press
the (CURSO R RIGHT) button. See the section on CO NVERGENCE for instruc-
tions in how to adjust the CO NVERGENCE controls.
Picture
m enu item s
Activities
➠
PI CTURE
BRI GHTNESS
38
Brightness
Colour
Increase or decrease brightness level.
Increase or decrease color level.
•
•
•
•
•
COLOUR
CONTRAST
SHARPNESS
HUE
•
Contrast
Increase or decrease contrast level until
lightest parts of the picture show good
detail.
Sharpness
Hue
Increase or decrease sharpness level to
improve detail in the picture.
PI CTURE
•
•
Increase or decrease hue level.
CONVERGE RED
•
•
•
•
HUE
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
COLOUR TEMP
NR
Colour
Temp
Allows you a choice of 3
picture settings (NORMAL, WARM and
COOL).
I NCR. PI CTURE
CONVERGENCE
▲
É
SAVE MULTI POI NT
•
NR (Noise
Reduction)
Allows you to reduce the “noise” (little
dots on the picture) from weak signal
broadcast. Selecting the “ON” option will
make the picture clearer.
Incredible
Picture
Selecting the “ON” option enhances the
details in the picture. The result is a more
dynamic and vivid picture.
Convergence Allows you to adjust how the red, green,
and blue colour components of the
picture come together on the screen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SO UND MENU
The sound menu allows you to make adjustments to the sound. It also allows you to select and
activate other features in the menu.
MENU
1. Press the
2. Press the
3. Press the
4. Press the
(MENU) button to enter main menu.
(CURSO R DO W N) button to select the SO UND menu.
(CURSO R RIGHT) button to enter the SO UND menu.
or
(CURSO R DO W N/UP) buttons to select the items on the
SO UND menu.
5. Press the or
(CURSO R LEFT/RIGHT) buttons to adjust or change settings.
Note: See the instructions below for adjusting the HEADPHO NE settings.
Sound
Activities
SOUND
TREBLE
➠
m enu item s
38
•
•
•
BASS
BALANCE
AVL
Treble
Increase or decrease the high frequency
level.
•
HEADPHONE
•
Bass
Increase or decrease the low frequency
level.
•
Balance
Adjusts the balance of the right and left
speakers’ sound output.
SOUND
AVL
As variation in signal conditions can result
in a sudden change in volume during
commercial breaks or channel switching,
selecting the “ON” function will enable
the volume to remain at a standard
volume level.
•
•
•
•
•
•
(Auto
I NCR. SURROUND
HEADPHONE
Volume
Leveller)
AUDI O OUT
SPEAKERS
BASS BOOST
•
OFF•
Incredible
Surround
Allows you to dramatically expand the
wall of sound that surrounds the listener
and heighten overall viewing pleasure.
How to adjust the
HEADPHONE settings
• With HEADPHONE
selected, press the
(CURSOR RIGHT)
button to enter the
HEADPHONE sub-
menu.
Headphone
Audio Out
Allows you to adjust the volume and
balance of the headphone.
You can connect an external audio system
to enhance the sound of your TV. Selecting
“VARIABLE” allows you to change the
volume at the TV using the TV’s remote
control. Choosing “FIXED” allows you to
adjust the volume at the receiver using the
receiver’s controls.
• Press the
or
(CURSOR DOW N/
UP) buttons to select
VOLUME or BAL-
ANCE.
Note: You may have to set your external audio system to
Auxiliary mode to play sound from your TV.
Speakers
Allows you to turn the TV’s speakers “ON”
or “OFF.”
• Press the
or
Bass Boost
Increases the low frequency range. This
creates a deeper, fuller sound.
(CURSOR LEFT/
RIGHT) buttons to
adjust settings.
MENU
• Press the
button to return to the
SOUND menu.
Note: STEREO and SAP (Second Audio Program) features are
offered in some areas. SAP is an additional audio channel. The
SAP channel usually is used to provide a second language
translation for a programme that is being shown.
(MENU)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NVERGENCE (CO NVERGE RED/BLUE)
Due to the influence of magnetic fields and changes in the position of the TV, the red, blue, and
green screen colours may not align properly. The result is that red or blue colours may
appear around the edges of images. If various images on the entire picture have red outlines,
adjust CO NVERGE RED. Then if any red outlines remain, adjust MULTIPO INT RED. If
various images on the entire picture have blue outlines, adjust CO NVERGE BLUE. Then if
any blue outlines remain, adjust MULTIPO INT BLUE. Use UNDO MULTIPO INT if you
want to restore the picture screen to the way it was before you made Multipoint adjustments.
Note
• After turning the TV set on, allow it to warm up for 15 minutes before adjusting Convergence.
• If you adjust Convergence and then change your signal source from PAL to NTSC or from
NTSC to PAL, you may need to readjust Convergence for the new signal source.
MENU
1. Enter main menu.
PI CTURE
•
•
•
•
•
•
•
CONVERGE RED
HUE
COLOUR TEMP
NR
I NCR. PI CTURE
CONVERGENCE
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
2. Enter PICTURE menu.
3. Press button repeatedly
until CO NVERGENCE
is selected.
PI CTURE
CONVERGENCE
•
•
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
4. Enter CO NVERGENCE
menu.
5. Enter CO NVERGE
RED mode.
•
•
CONVERGE RED
6. Adjust cross image until
colour outline is gone.
OSD
CONVERGE RED
7. Exit menu from screen.
Note: You can adjust CO NVERGE BLUE similar to the way you would adjust
CO NVERGE RED.
PI CTURE
PI CTURE
CONVERGENCE
•
•
•
•
•
•
•
CONVERGE RED
HUE
COLOUR TEMP
NR
•
CONVERGE RED
CONVERGE BLUE
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
•
•
•
M
ULTI POI NT RED
ULTI POI NT BLUE
SAVE ULTI POI NT
I NCR. PI CTURE
CONVERGENCE
M
▲
É
•
M
•
CONVERGE BLUE
•
CONVERGE BLUE
•
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NVERGENCE (MULTIPO INT RED/BLUE)
If various images on the entire picture have red outlines, adjust CO NVERGE RED. Then if
any red outlines remain, adjust MULTIPO INT RED. If various images on the entire picture
have blue outlines, adjust CO NVERGE BLUE. Then if any blue outlines remain, adjust
MULTIPO INT BLUE. Use UNDO MULTIPO INT if you want to restore the picture
screen to the way it was before you made Multipoint adjustments.
Note
• After turning the TV set on, allow it to warm up for 15 minutes before adjusting
Convergence.
• You can use Multipoint Red and Multipoint Blue controls to adjust 25 Convergence points
on the screen.
• If you adjust Convergence and then change your signal source from PAL to NTSC or from
NTSC to PAL, you may need to readjust Convergence for the new signal source.
MENU
1. Enter main menu.
PI CTURE
•
•
•
CONVERGE RED
HUE
COLOUR TEMP
NR
I NCR. PI CTURE
CONVERGENCE
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
•
•
•
2. Enter PICTURE menu.
▲
É
SAVE MULTI POI NT
•
3. Press button repeatedly
until CO NVERGENCE
is selected.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
▲
É
•
•
4. Enter CONVERGENCE
menu.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
5. Press button repeatedly
until MULTIPO INT
RED is selected.
▲
É
•
•
6. Enter NAVIGATE
mode.
N AVIG AT E OSD: ADJ UST
•
Download from Www.Somanuals.com2. A1ll Manuals Search And Download.
CO NVERGENCE (MULTIPO INT RED/BLUE) (CO NTINUED)
7. Navigate to a cross image
that has a colour outline.
Note: To display three
hidden cross images,
navigate to bottom row.
N AVIG AT E OSD: ADJ UST
•
OSD
8. Enter ADJUST mode.
9. Adjust cross image until
colour outline is gone.
ADJ UST
OSD: N AVIG AT E
•
OSD
10. Return to NAVIGATE
mode.
Repeat steps 7 to 10
until all misaligned crosses
have been adjusted.
N AVIG AT E OSD: ADJ UST
•
MENU
11. Return to
CONVERGENCE
menu.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
•
•
▲
É
•
•
12. Press button repeatedly
until SAVE
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
MULTIPOINT is selected.
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
▲
•
•
•
•
13. Activate storing of
Multipoint adjustments.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
▲
OSD
•
STORED
•
14. Exit menu from screen.
Note: You can adjust MULTIPOINT BLUE similarly to the way you would adjust MULTIPOINT
RED.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NVERGENCE (UNDO MULTIPO INT)
UNDO MULTIPO INT allows you to restore the TV’s picture screen to the way it was
before you made Multipoint adjustments.
MENU
1. Enter main menu.
PI CTURE
•
•
•
CONVERGE RED
HUE
COLOUR TEMP
NR
I NCR. PI CTURE
CONVERGENCE
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
•
•
•
2. Enter PICTURE menu.
▲
É
SAVE MULTI POI NT
•
3. Press button repeatedly
until CO NVERGENCE
is selected.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE RED
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
•
▲
É
•
•
4. Enter CO NVERGENCE
menu.
PI CTURE
CONVERGENCE
•
•
•
•
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
UNDO MULTI POI NT
•
5. Press button repeatedly
until UNDO MULTIPOINT
is selected.
•
•
▲
•
RESTORI NG
PI CTURE
CONVERGENCE
6. Activate restoring of
previous picture screen.
•
•
•
•
CONVERGE BLUE
MULTI POI NT RED
MULTI POI NT BLUE
SAVE MULTI POI NT
UNDO MULTI POI NT
•
•
•
▲
•
RESTORED
OSD
7. Exit menu from screen.
Download from Www.Somanuals.com2. A3ll Manuals Search And Download.
ACTIVATING THE TIMER
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
TIMER
1. Enter TIMER menu.
FEATURES
TI MER
TI ME
•
– – : – –
•
•
•
•
•
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
2. Enter TIME mode.
2
5
8
0
1
4
7
3
6
9
FEATURES
TI MER
3. Key in the current time
For example, if the current
time is 12:30, key digit 1
and 2 in the hour column,
followed by digit 3 and 0
in the minute column.
TI ME
•
12: 30
•
•
•
•
•
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
FEATURES
TI MER
MENU
4. Exit from TIME mode.
•
TI ME
START TI ME
STOP TI ME
CHANNEL
•
– – : – –
•
•
•
•
5. Select START TIME.
ACTI VATE
FEATURES
TI MER
6. Enter the START TIME
mode.
•
TI ME
START TI ME
STOP TI ME
CHANNEL
•
13: 30
2
5
8
0
1
4
7
3
6
9
7. Key in the time you want
the programme to be
switched on.
•
•
•
•
ACTI VATE
FEATURES
TI MER
MENU
8. Exit from START TIME
mode.
•
TI ME
•
START TI ME
STOP TI ME
CHANNEL
•
•
– – : – –
9. Select STO P TIME.
•
•
•
ACTI VATE
10. Enter STO P TIME mode.
FEATURES
TI MER
•
TI ME
2
5
8
0
1
4
7
3
6
9
11. Key in the time you want
the programme to be
switched off.
•
START TI ME
STOP TI ME
CHANNEL
15: 30
•
•
•
ACTI VATE
Download from Www.Somanuals2.co4m. All Manuals Search And Download.
ACTIVATING THE TIMER (CO NTINUED)
MENU
12. Exit from STO P TIME
FEATURES
TI MER
mode.
•
•
•
TI ME
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
13. Select CHANNEL.
•
3
•
•
2
5
8
0
1
4
7
3
6
9
FEATURES
TI MER
14. Key in the channel you
want to switch to.
•
•
•
TI ME
START TI ME
STOP TI ME
CHANNEL
•
8
•
•
ACTI VATE
15. Select ACTIVATE.
FEATURES
TI MER
•
•
•
•
TI ME
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
•
OFF
•
FEATURES
TI MER
16. Activate timer. You can
select to activate timer
by DAILY or O NCE
mode.
•
•
•
•
TI ME
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
•
ONCE
•
17. Select DISPLAY.
FEATURES
TI MER
•
•
START TI ME
STOP TI ME
CHANNEL
18. Select O N mode if you
want to display the
current time on the TV
screen.
•
•
•
ACTI VATE
DI SPLAY
•
ON
OSD
19. Exit menu from screen.
Note
30 seconds before the timer is activated, a message indicating the time left for the channel
switch will appear on the screen. To disable the channel switch, press any button on the
remote control.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LO CK (ACCESS CO DE)
The Child Lock feature allows you to lock channels to prevent your children from watching
programmes you deem undesirable.
Note : You cannot have access to the locked channels via the TV set’s controls.
You can only have access to the locked channels via the remote control. Keep the remote
control out of reach so as to prevent your children from having access to it.
MENU
SURF
FEATURES
MENU
SURF
MENU
SURF
▲
É
•
TI MER
TI ME
▼
•
•
•
•
CHI LD LOCK START TI ME
PI P STOP TI ME
CLOSED CAP CHANNEL
➠
➠
➠
BLUE MUTE
ACTI VATE
1. Enter main menu. 2. Select FEATURES . 3. Enter FEATURES menu.
4. Select CHILD LO CK.
FEATURES
•
TI MER
CHI LD LOCK
PI P
CLOSED CAP
BLUE MUTE
ACCESS CODE
▲
É
•
–
–
–
–
▼
•
•
•
5. Enter ACCESS CO DE
mode.
6. Key in access code 0711
(0711 is the default access
code). A message
FEATURES
É
•
TI MER
CHI LD LOCK
ACCESS CODE
2
5
8
0
1
4
7
3
6
9
Ñ
X
X
X
X
X
•
•
•
PI P
CLOSED CAP
BLUE MUTE
I NCORRECT
INCO RRECT will appear.
2
5
8
0
1
4
7
3
6
9
7. Key in 0711 the second
time. When the message
CO RRECT appears, the
CHILD LO CK menu is
now accessible.
FEATURES
É
•
TI MER
CHI LD LOCK
PI P
ACCESS CODE
Ñ
X
X
X
X
•
•
•
CORRECT
CLOSED CAP
BLUE MUTE
You can now proceed to
change the access code
of your choice.
FEATURES
CHI LD LOCK
LOCK CHANNEL
•
2
3
4
5
6
•
CHANGE CODE
CLEAR ALL
•
Download from Www.Somanuals2.co6m. All Manuals Search And Download.
ACTIVATING THE CHILD LO CK (CHANGE CO DE)
8. Select CHANGE CO DE.
FEATURES
CHI LD LOCK
•
LOCK CHANNEL
CHANGE CODE
CLEAR ALL
ENTER
NEW CODE
•
•
–
–
–
–
9. Enter CHANGE CO DE
mode.
FEATURES
CHI LD LOCK
•
LOCK CHANNEL
CHANGE CODE
CLEAR ALL
ENTER
NEW CODE
2
5
8
0
1
4
7
3
6
9
10. Key in the access code of
your choice.
•
•
X
X
X
X
2
1
3
11. Confirm access code.
4
7
5
8
0
6
9
FEATURES
CHI LD LOCK
•
LOCK CHANNEL
CHANGE CODE
CLEAR ALL
CONFI RM
CODE
•
•
X
X
X
X
When the new code
is confirmed, the
message CO RRECT
will appear.
FEATURES
CHI LD LOCK
•
LOCK CHANNEL
CHANGE CODE
CLEAR ALL
CONFI RM
CODE
•
•
X
X
X
X
CORRECT
OSD
12. Exit menu from screen.
Note : After you have exited menu from screen and you want to enter child lock menu again,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LO CK (LO CK CHANNEL)
ENU
SURF
MENU
SURF
FEATURES
MENU
SURF
▲
É
•
TI MER
CHI LD LOCK
PI P
TI ME
▼
•
•
•
•
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
➠
➠
➠
CLOSED CAP
BLUE MUTE
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
4. Select CHILD LO CK .
FEATURES
É
•
TI MER
CHI LD LOCK
PI P
CLOSED CAP
BLUE MUTE
ACCESS CODE
▲
•
–
–
–
–
▼
•
•
•
5. Enter ACCESS CO DE
mode.
6. Key in access code .
FEATURES
2
5
8
0
1
4
7
3
6
9
É
•
TI MER
CHI LD LOCK
PI P
ACCESS CODE
Ñ
X
X
X
X
•
•
•
CORRECT
CLOSED CAP
BLUE MUTE
7. Enter LO CK CHANNEL
FEATURES
CHI LD LOCK
LOCK CHANNEL
mode.
•
2
3
4
5
6
•
•
CHANGE CODE
CLEAR ALL
8. Select the channel you
want to block.
FEATURES
CHI LD LOCK
LOCK CHANNEL
O R
9. Activate blocking of
channel. A keylock symbol
will appear beside the
channel number indicating
that it is locked.
•
3
•
CHANGE CODE
CLEAR ALL
4
5
6
7
•
OSD
10. Exit menu from screen.
Note : You cannot have access to the locked channels via the TV set’s controls.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Likewise, if CV1 source is
locked, AV1 source is also automatically locked, as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CO DE” will appear on the screen. You need to enter the ACCESS CO DE
to enable you to enter the INSTALL menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LO CK (CLEAR ALL)
To unlock all channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
FEATURES
MENU
SURF
MENU
SURF
▲
MENU
SURF
É
•
TI MER
TI ME
CHI LD LOCK START TI ME
PI P STOP TI ME
CLOSED CAP CHANNEL
▼
•
•
•
•
➠
➠
➠
BLUE MUTE
ACTI VATE
1. Enter main menu. 2. Select FEATURES 3. Enter FEATURES menu.
4. Select CHILD LO CK.
FEATURES
É
•
TI MER
ACCESS CODE
▲
•
CHI LD LOCK
PI P
–
–
–
–
▼
•
•
CLOSED CAP
BLUE MUTE
•
5. Enter ACCESS CO DE
mode.
FEATURES
2
5
8
0
1
4
7
3
6
9
É
•
TI MER
CHI LD LOCK
PI P
ACCESS CODE
6. Key in access code.
Ñ
X
X
X
X
•
•
•
CORRECT
CLOSED CAP
BLUE MUTE
7. Press button repeatedly
until CLEAR ALL is
selected.
FEATURES
CHI LD LOCK
LOCK CHANNEL
•
•
CHANGE CODE
CLEAR ALL
•
8. Activate clearing of all
locked channels.
FEATURES
CHI LD LOCK
•
•
LOCK CHANNEL
CHANGE CODE
CLEAR ALL
•
CLEARED
OSD
9. Exit menu from screen.
Note
You can also unlock individual channels by the LO CK CHANNEL menu.
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LO CK (LO CK CHANNEL).”
• Select the channel you want to unlock by the or (CURSO R UP / DO W N) buttons.
• Press the
disappear).
(CURSO R RIGHT) button to unlock channel (the keylock symbol will
29
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CLO SED CAPTIO NING CO NTRO L
Closed Captioning (CC) allows you to read the voice content of television programmes on
the TV. Designed to help the hearing impaired, this feature uses on-screen “text boxes” to
show dialogue and conversations while the TV programme is in progress.
FEATURES
MENU
SURF
MENU
SURF
MENU
SURF
▲
É
•
TI MER
CHI LD LOCK
PI P
TI ME
▼
•
•
•
START TI ME
STOP TI ME
CHANNEL
ACTI VATE
➠
➠
➠
CLOSED CAP
BLUE MUTE
•
1.Enter main menu. 2. Select FEATURES.
3. Enter FEATURES menu.
4. Select CLO SED CAP.
FEATURES
•
•
•
•
TI MER
CHI LD LOCK
PI P
CLOSED CAP
BLUE MUTE
CAPTI ON MODE
CC DI SPLAY
É
▲
É
▼
•
5. Enter CLO SED CAP
FEATURES
CLOSED CAP
▲
menu.
É
Ñ
CAPTI ON MODE
CC DI SPLAY
•
CC1
•
CC2
CC3
CC4
6. Enter CAPTIO N MO DE
mode.
FEATURES
CLOSED CAP
▲
7. Select your desired caption
mode. You can choose
caption or in text mode.
There are 5 types of caption
(CC1, CC2, CC3, CC4 and
CC MUTE) and 4 types of
text (TXT1, TXT2, TXT3
and TXT4).
É
Ñ
CAPTI ON MODE
CC DI SPLAY
•
CC1
CC2
CC3
CC4
•
O R
CC MUTE
▼
FEATURES
CLOSED CAP
8. Exit from CAPTIO N
MO DE.
9. Select CC DISPLAY.
▲
•
CAPTI ON MODE
CC DI SPLAY
É
Ñ
•
OFF
10. Select O N to display
Closed Captioning
on screen.
FEATURES
CLOSED CAP
▲
•
CAPTI ON MODE
CC DI SPLAY
É
Ñ
•
ON
OSD
11. Exit menu from screen.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CLO SED CAPTIO NING CO NTRO L
Example of a CAPTION mode
Caption 1, 2, 3 or 4
During screening, dialogues (or descriptions)
for the captioned television programme
appear on the screen. The text can appear
up to 4 rows simultaneously anywhere on
the screen.
Dar l i ng, ar e sur e you do not want anyt hi ng t o eat ?
Example of a TEXT mode
TEXT 1, 2, 3 or 4
Closed Caption Programme on TCS
Text mode is often used for channel guides,
schedules or bulletin board information when
programmes with Closed Captioning are
shown. The complete screen is used for
displaying the text.
All items are based on standard time
(est). Check local listings for the time
in your area.
08 : 00 Things People Do
10 : 00 Dining in Style
12 : 00 News at Noon
12 : 30 The Animal Kingdom
IMPO RTANT
1. Not all television programmes and product commercials are made for broadcast with
Closed Captioning information included. Neither are all Closed Captioning modes (Caption
1 to 4 or TEXT 1 to 4) necessarily being used by a broadcast station during transmission
of a programme with Closed Captioning. Check with your local listings for details.
2. A broadcast station will often use spelling abbreviations, symbols and other grammatical
short-cuts in order to keep pace with the on-screen action. These vary with the source
of the captioned text material and do not indicate a need for the service of the television.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SURF CO NTRO L
A list or series of previously viewed channels can be selected with the SURF button. This
feature allows you to switch between different TV programmes that currently interest you.
You can set up to a maximum of ten channels in the SURF list.
How to add a channel to the surf list
2
5
8
0
1
4
7
3
6
9
1. Select a channel you
want to add to the
surf list.
8
SURF
2. Enter SURF menu.
SURF
•
8
ADD?
SURF LI ST EMPTY
3. Add selected channel to
the surf list.
SURF
•
8
DELETE?
Repeat steps 1 - 3 to add
more channels to the
surf list.
SURF
•
8
5
•
ADD?
OSD
4. After you have completed
adding the selected
SURF
•
8
5
•
DELETE?
channels to the surf list,
exit menu from screen.
Ñ
Note : To view the the selected channels in the surf list, press the SURF button repeatedly
to cycle through the channels.
How to delete a channel from the surf list
SURF
1. Press the
(SURF) button to display surf list.
SURF
2. Press the
(SURF) button repeatedly to cycle through the surf list and select the
channel you want to delete.
3. Press the
(CURSO R RIGHT) button to delete channel from the surf list.
4. Repeat all the above steps if you want to delete more channels from the surf list.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE BLUE MUTE CO NTRO L
The Blue Mute feature indicates to you the absence of signal in the transmission when the
“O N” option is activated. Upon the detection of absence of signal, the TV screen will turn
blue in colour.
EU
SURF
MENU
SURF
MENU
SURF
FEATURES
▲
➠
É
➠
•
TI MER
TI ME
➠
▼
•
•
•
•
CHI LD LOCK START TI ME
PI P STOP TI ME
CLOSED CAP CHANNEL
BLUE MUTE ACTI VATE
1. Enter main menu. 2. Select FEATURES. 3. Enter the FEATURES menu.
4. Press the
(CURSO R DO W N) button repeatedly
until BLUE MUTE is selected.
FEATURES
•
TI MER
CHI LD LOCK
PI P
CLOSED CAP
BLUE MUTE
•
▼
•
•
•
5. Press the
(CURSO R RIGHT) button to select O N
to activate blue mute feature.
Ñ
•
É
ON
OSD
6. Press the
(O SD) button to exit menu from screen.
USING THE PRO GRAM LIST FEATURE
The Program List feature allows you to navigate through a list of installed programmes for a
quick overview of the channels and activate the channel you have selected.
PROG. LIST
1. Press the
(PRO GRAM LIST) button to
PROGRAM LI ST
display the list of installed programmes. The current
channel is highlighted.
•
1
2
3
4
5
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Ñ
2. Press the
(CURSO R UP) or
(CURSO R DO W N)
PROGRAM LI ST
button to cycle through the programme list and
highlight the channel number you want to activate.
1
2
3
4
5
ACTI O
DRAMA
VI OLE
ROMAN
•
_
_
_
_
_
3. Press the
(CURSO R RIGHT) button to activate
Ñ
the channel you have selected.
OSD
4. Press the
(O SD) button to exit menu from screen.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SMART PICTURE AND SMART SO UND CO NTRO L
SMART PICTURE feature offers you a choice of 5 picture settings, namely, PERSO NAL,
RICH, NATURAL, SO FT and MULTIMEDIA.
SMART SO UND feature offers you a choice of 4 sound settings, namely, PERSO NAL,
VO ICE, MUSIC and THEATRE.
SMART
SMART
Press
(SMART PICTURE) or
(SMART SO UND) button repeatedly to cycle
SOUND
PICTURE
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL : Picture settings are set to your preference.
PERSONAL
RI CH
RICH
: Emphasize very vibrant colours
(suitable for AV mode in brightly lit room).
: Emphasize original colours.
BRI GHTNESS
COLOUR
38
32
NATURAL
SOFT
BRI GHTNESS
COLOUR
60
33
: Emphasize “warm” colours
(suitable for dimly lit room condition and
gives cinema-like effect when light is
switched off).
NATURAL
BRI GHTNESS
COLOUR
PI CTURE
50
30
75
MULTIMEDIA : Emphasize “soft” colours (suitable for
playing computer games, surfing, etc.).
SOFT
BRI GHTNESS
COLOUR
41
30
Note: The PERSO NAL setting is the setting that you
set up using the Picture menu in the main menu. This
is the only setting in the Smart Picture settings that
can be changed. All the other settings are pre-set at
the factory.
MULTI MEDI A
BRI GHTNESS
COLOUR
PI CTURE
41
30
50
59
SHARPNESS
Definition of Sound Settings
PERSONAL : Sound settings are set to your preference.
PERSONAL
VOICE
: Emphasize high tone (treble boosted).
: Emphasize low tone (bass boosted).
: Emphasize sensation to action
(bass and treble boosted).
TREBLE
BASS
52
68
MUSIC
THEATRE
VOI CE
TREBLE
BASS
56
47
MUSI C
TREBLE
BASS
63
69
THEATRE
TREBLE
BASS
60
72
34
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE PIP (PICTURE-IN-PICTURE)
AND DO UBLE W INDO W CO NTRO L
Picture-in-Picture feature allows you to call up a sub-screen within your main screen,
enabling you to watch two channels at the same time.
Double W indow feature allows you to divide the main screen into two sub-screens,
enabling two channels to be watched simultaneously.
How to switch on the PIP/Double W indow screen
• Press the
(PIP O n/O ff) button
ON/OFF
to switch on PIP mode. (A normal size
PIP screen appears.)
• Press the
button the second
ON/OFF
time to change the normal size PIP
screen to a smaller size.
• Press the
button the third time
to switch tOoN/OFDF ouble Window screens
in 4:3 format.
How to hear PIP sound
• Press the
to switch on PIP mode.
(PIP O n/O ff) button
ON/OFF
AV sockets
on side of
TV
• Connect the headphone cable to the
headphone socket to hear PIP sound.
(The HEADPHO NE control within the
SO UND menu allows you to adjust the
headphone volume. Refer to the section
on “Using the Picture/Sound Menu” for
instructions.)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE PIP (PICTURE-IN-PICTURE)
CO NTRO L
How to select a PIP channel
V. DOLBY
A/CH PROG. LIST INCR. PICT.
•
Press the
switch on PIP screen.
(PIP O n/O ff) button to
2
ON/OFF
STEREO/SAP
PIP
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH+
PIP CH
3
CH–
CH+
V. DOLBY
A/CH PROG. LIST INCR. PICT.
•
Press the
(PIP CH +) or
4
STEREO/SAP
PIP
(PIP CH –) button to select a PIP
channel in ascending or descending order.
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH+
PIP CH
How to freeze the PIP screen
V. DOLBY
A/CH PROG. LIST INCR. PICT.
•
Press the
to switch on PIP screen.
(PIP O n/O ff) button
ON/OFF
STEREO/SAP
PIP
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH+
PIP CH
V. DOLBY
A/CH PROG. LIST INCR. PICT.
•
Press
(PIP Freeze) button once
FREEZE
STEREO/SAP
PIP
to freeze the PIP screen. Freezing the PIP
screen allows you to view a programme
in the still mode. For example, you may
want to write down some information
from the PIP screen, freezing the screen
will allow you time to do so.
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH
H
PIP Freeze
•
Press the
(PIP Freeze) button
the secondFRtEiEZmE e to unfreeze the
PIP screen.
PIP Unfreeze
Download from Www.Somanuals3.co6m. All Manuals Search And Download.
ACTIVATING THE PIP (PICTURE-IN-PICTURE)
CO NTRO L
How to position the PIP screen
V. DOLBY
A/CH PROG. LIST INCR. PICT.
STEREO/SAP
PIP
• Press the
button to switch on PIP
screen.
(PIP O n/O ff)
ON/OFF
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH+
➠
PIP CH
• Press the
(PIP Position)
POSITION
button repeatedly to your
desired position. (You can
choose the PIP screen to be on
the top left corner, top right
corner, bottom right corner
or the bottom left corner.)
V. DOLBY
A/CH PROG. LIST INCR. PICT.
STEREO/SAP
PIP
➠
FREEZE
ON/OFF
S
OSITION
CH+
CH–
PIP CH
How to swap the PIP screen and the m ain screen
V. DOLBY
A/CH PROG. LIST INCR. PICT.
• Press the
button to switch on PIP
screen.
(PIP O n/O ff)
STEREO/SAP
PIP
ON/OFF
➠
➠
FREEZE
CH–
N/OFF
WAP
POSITION
CH+
PIP CH
• Press the
(PIP Swap)
SWAP
V. DOLBY
A/CH PROG. LIST INCR. PICT.
button to swap the programme
in the PIP screen and the
STEREO/SAP
PIP
programme in the main screen.
FREEZE
CH–
ON/OFF
SWAP
POSITION
CH+
PIP CH
How to adjust the PIP Hue setting
MENU
1. Press the
(MENU) button to enter main menu.
•
•
•
•
PI CTURE
SOUND
FEATURES
I NSTALL
TI MER
CHI LD LOCK
PI P
CLOSED CAP
BLUE MUTE
2. Press the
repeatedly until FEATURES is selected.
(CURSO R DO W N) button
3. Press the
the FEATURES menu.
(CURSO R RIGHT) button to enter
FEATURES
•
TI MER
CHI LD LOCK
PI P
CLOSEDCAP
HUE
•
4. Press the
until PIP is selected.
(CURSO R DO W N) button repeatedly
▲
É
•
▼
•
•
5. Press the
(CURSO R RIGHT) button to enter
PIP menu.
FEATURES
PI P
6. Press the
(CURSO R LEFT) or (CURSO R
HUE
8
RIGHT) button to adjust HUE setting to your desired level.
OSD
7. Press the
(O SD) button to exit menu from screen.
Note : Hue adjustments in the PIP programmes will only
take effect if programmes are in NTSC mode.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
|