Philips Portable DVD Player
PET1031
Quick start guide
1
2
3
4
Charge
Enjoy DVD
Connect to TV
Swiveling LCD screen
You can swivel the LCD screen
of this player clockwisea
1
2
AV OUT
SD/MMC CARD
S
VIDEO COMP.OUT
DV 9V-12V
1
maximum of 180° for use.
7
3
2
3
4 6
Open the lid.
3
1 Switch OFF the set.
1
1 Connect the set to the TV as shown.
2 Connect the supplied adaptor to the set and
2 Press and hold POWER.
2 Please select an appropriate input or source on the
TV. You can consult the owner’s manual of your
TV. (If yourTV does not have Audio and Video
inputs, you will needto purchase a RF modulator.
Please consult your dealerfor more information.)
the ACoutlet.
3 The GREEN light turns on.
3 The RED light comes on.
4 Open the DVD door by sliding the OPEN.
5 Remove protective card (if any).
6 Load the DVD disc.
4 The battery pack will be fully charged in
approximately 5 hours. When the RED light
goes off, it means that thebattery pack is fully
charged.
7 Close the DVD door and the set will
TIP: For better video quality,please use COMP.OUT
automatically startto play.
connection (see User Manual section 6.2.6)
8 Use the control keys on the set or the remote
TIP: Your battery will continue to charge while
the player is inuse. However, the RED light will
not appear and it will takeapproximately 12 hours
to fully charge the battery pack.
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
|