Philco DVD Player PVD2000 User Manual

Owner’s Manual  
Please read before using this unit.  
DVD/CD Player with Video Cassette Recorder  
INSTRUCCIONES EN  
ESPAÑOL INCLUIDAS.  
PVD2000  
Supplied Accessories  
Remote control (NB183UD) RF cable  
with two AA batteries  
(WPZ0901TM002)  
Audio/Video cables  
(WPZ0102TM015 /  
WPZ0102LTE01)  
Owner’s Manual  
(1VMN23215)  
If you need additional operating assistance  
after reading this owner’s manual, please call  
TOLL FREE : 1-800-317-6062  
or visit our web site at  
Owner's Manual  
Table of Contents  
Precautions  
Recording................................................................................. 12  
Recording & OTR (One Touch Recording) ............................... 12  
Timer Recording........................................................................ 12  
Hints for OTR and Timer Recording.......................................... 13  
Copying a Video Tape............................................................... 14  
Laser Safety................................................................................ 2  
Important Safeguards................................................................ 3  
Location and Handling ................................................................ 4  
Avoid the Hazards of Electrical Shock and Fire.......................... 4  
Moisture Condensation Warning................................................. 4  
About Copyright .......................................................................... 4  
Notice for Progressive Scan Outputs.......................................... 4  
Symbols Used in This Manual..................................................... 4  
Maintenance................................................................................ 4  
About the Video Cassettes and Discs ..................................... 5  
Playable Video Cassettes ........................................................... 5  
Playable Discs............................................................................. 5  
Unplayable Discs ........................................................................ 5  
DVD Functions  
Playback ................................................................................... 15  
MP3 Playback........................................................................... 16  
On-Screen Display................................................................... 16  
Search Functions..................................................................... 17  
Using Track Search................................................................... 17  
Using Title / Chapter Search..................................................... 17  
Using Time Search.................................................................... 17  
Marker Setup............................................................................. 17  
Repeat / Random / Programmed Playback............................ 18  
Repeat Playback / Repeat A-B Playback.................................. 18  
Random Playback / Programmed Playback.............................. 18  
Special Settings....................................................................... 19  
Subtitle Language / Audio Language / Camera Angle.............. 19  
Black Level Setting / Stereo Sound Mode / Virtual Surround.... 19  
DVD Setup ................................................................................ 20  
LANGUAGE Setting.................................................................. 20  
DISPLAY Setting....................................................................... 21  
AUDIO Setting........................................................................... 21  
PARENTAL Setting................................................................... 22  
OTHERS Setting....................................................................... 22  
Reset to the Default Setting (Except for PARENTAL Setting) .. 23  
Setup  
Connections............................................................................... 6  
RF Output Channel ..................................................................... 6  
Hint for Cable Box or Satellite Box.............................................. 6  
Connection to an Audio System.................................................. 6  
Connection to a TV ..................................................................... 7  
Preparation for Use ................................................................... 8  
Turn on the Unit for the First Time .............................................. 8  
To Add or Delete Channels......................................................... 8  
Clock Setup................................................................................. 8  
Function Overview..................................................................... 9  
Front Panel Indicator................................................................... 9  
VCR / DVD Switching.................................................................. 9  
Front & Rear Terminals............................................................... 9  
Remote Control......................................................................... 10  
Installing the Batteries for the Remote Control ......................... 10  
Information  
Troubleshooting Guide ........................................................... 23  
Specifications .......................................................................... 24  
Language Code List ................................................................ 24  
Limited Warranty ..................................................................... 24  
Español..................................................................................... 25  
Quick Use Guide...................................................................... 27  
VCR Functions  
Playback ................................................................................... 11  
Other Operations ..................................................................... 11  
Index Search............................................................................. 11  
Time Search.............................................................................. 11  
Auto Repeat .............................................................................. 12  
Basic TV Connection  
Antenna  
or  
Cable TV Antenna  
signal  
or  
Cable TV  
signal  
(Back of DVD/VCR)  
(Back of TV)  
4
AC  
outlets  
(Back of TV)  
Plug in  
ANT-IN  
2
ANT-OUT  
Disconnect  
3
Connect  
Connect  
From DVD/VCR  
From TV  
RF cable (supplied)  
Please refer to “Connections” on page 6.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instruc-  
tions should be read before the appliance is operated.  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and requirements for  
the grounding electrode. (Fig. A)  
FIGURE A  
ANTENNA  
LEAD  
WIRE  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the  
possibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user for  
cleaning or any other purpose, may exclude the reference  
to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
6. Attachments - Do not use attachments not recommended  
by the video product manufacturer as they may cause  
hazards.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub, in a wet basement, or near a  
swimming pool, and the like.  
14. Lightning - For added protection for this video product  
during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This  
will prevent damage to the video product due to lightning  
and power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with  
them might be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of  
any kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
8. Accessories - Do not place this video product on an  
unstable cart, stand, tripod, bracket, or table. The video  
product may fall, causing serious injury to a child or adult,  
and serious damage to the appliance. Use only with a  
cart, stand, tripod, bracket, or table recommended by the  
manufacturer, or sold with the video product. Any mount-  
ing of the appliance should follow the  
manufacturer's instructions and should  
use a mounting accessory recommended  
by the manufacturer. An appliance and  
cart combination should be moved with  
care. Quick stops, excessive force, and  
uneven surfaces may cause the appli-  
ance and cart combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are pro-  
vided for ventilation and to ensure reliable operation of  
the video product and to protect it from overheating, and  
these openings must not be blocked or covered. The  
openings should never be blocked by placing the video  
product on a bed, sofa, rug, or other similar surface. This  
video product should not be placed in a built-in installa-  
tion such as a bookcase or rack unless proper ventilation  
is provided or the manufacturer's instructions have been  
adhered to.  
19. Damage Requiring Service - Unplug this video product  
from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
video product.  
10. Power Sources - This video product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of power  
supply to your home, consult your appliance dealer or  
local power company. For products intended to operate  
from battery power, or other sources, refer to the  
operating instructions.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by  
following the operating instructions. Adjust only those  
controls that are covered by the operating instructions  
as an improper adjustment of other controls may result  
in damage and will often require extensive work by a  
qualified technician to restore the video product to its  
normal operation.  
11. Grounding or Polarization - This video product is  
equipped with a polarized alternating-current line plug (a  
plug having one blade wider than the other). This plug  
will fit into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still fail to  
fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience recep-  
tacles, and the point where they exit from the appliance.  
13. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the video product, be sure  
the antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code, ANSI/  
NFPA No. 70, provides information with regard to proper  
e. If the video product has been dropped or damaged in  
any way.  
f. When the video product exhibits a distinct change in  
performance this indicates a need for service.  
20. Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or have  
the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other  
hazards.  
21. Safety Check - Upon completion of any service or repairs  
to this video product, ask the service technician to per-  
form safety checks to determine that the video product is  
in proper operating condition.  
22. Heat - This video product should be situated away from  
heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
3
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location and Handling  
Symbols Used in This Manual  
Do not stand this unit up vertically. Install this unit in a hori-  
zontal and stable position. Do not place anything directly on  
top of this unit. Do not place this unit directly on top of the TV.  
The following symbols appear in some headings in this  
manual.  
: Description refers to playback or recording of  
video cassette tapes.  
• Depending on the TV, noise or disturbance of the picture  
and/or sound may be generated if this unit is placed too  
close to your TV. In this case, please ensure enough space  
between your TV and this unit.  
:
Description refers to playback of DVD-Video discs.  
• Do not cover or place this unit in enclosed spaces to prevent  
excessive temperature build up.  
: Description refers to playback of Audio CDs.  
: Description refers to playback of Video CDs.  
: Description refers to playback of MP3 files.  
Do not place this unit in direct sunlight, or near heat sources.  
• Depending on the environment, the temperature of this unit  
may increase slightly. This is not a malfunction.  
• Keep this unit away from strong magnetic objects.  
• Do not place any object containing water or other liquids on  
this unit. In the event that liquid should enter the cabinet,  
unplug this unit immediately and contact the retailer or an  
Authorized Service Center immediately.  
Maintenance  
• Do not remove this unit cabinet. Touching parts inside the  
cabinet could result in electric shock and/or damage to this  
unit. For service and adjustment inside the cabinet, call a  
qualified dealer or an Authorized Service Center.  
• Be sure to remove disc and video tape and unplug the AC  
power cord from the output before carrying this unit.  
SERVICING  
• Please refer to relevant topics on the “Troubleshooting  
Guide” on page 23 before returning the product.  
• If this unit becomes inoperative, do not try to correct the  
problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call  
our help line mentioned on the front page to locate an  
Authorized Service Center.  
Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from  
AC wall outlet. Grasp it by the plug.  
CLEANING THE CABINET  
• Use a soft cloth slightly moistened with a mild detergent  
solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasive.  
• If, by accident, water is spilled on this unit, unplug the power  
cord immediately and take the unit to our Authorized Service  
Center for servicing.  
CLEANING DISCS  
Do not put your fingers or objects into the unit cassette holder.  
• When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center to out. Do not wipe in a circu-  
lar motion.  
Do not use solvents such as benzine, thinner, commercially avail-  
able cleaners, detergent, abrasive cleaning agents or antistatic  
spray intended for analog records.  
Moisture Condensation Warning  
Moisture may form inside this unit under the following condi-  
tions:  
• Immediately after a heater is turned on.  
• In a steamy or humid room.  
• When this unit is suddenly moved from a cold to warm envi-  
ronment.  
If moisture forms inside this unit, it may not operate  
properly or damage the video tape. In such case, turn on  
the power and wait for more than 2 hours for the moisture to  
evaporate.  
CLEANING THE DISC LENS  
• If this unit still does not perform properly although you refer  
to the relevant sections and to “Troubleshooting Guide” in  
this Owner’s Manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an Authorized Service Center  
for inspection and cleaning of the laser optical pickup unit.  
DISC HANDLING  
• When you handle a disc, hold it by its edge and try not to  
touch the surface of the disc.  
• Always store the disc in its protective case when it is not  
used.  
About Copyright  
Unauthorized copying, broadcasting, public performance and  
lending of discs are prohibited.  
This product incorporates copyright protection technology that  
is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and  
other limited viewing uses only unless otherwise authorized by  
Macrovision. Reverse engineering or disassembly is  
prohibited.  
AUTO HEAD CLEANING  
• Automatically cleans video heads as you insert or remove a  
cassette, so you can see a clear picture.  
• Playback picture may become blurred or interrupted while  
the TV program reception is clear. Dirt accumulated on the  
video heads after a long period of use, or the usage of rental  
or worn tapes can cause this problem. If a streaky or snowy  
picture appears during playback, the video heads in your  
unit may need to be cleaned.  
1. Please visit your local Audio/Video store and purchase a  
good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the problem,  
please call our help line mentioned on the front page to  
locate an Authorized Service Center.  
Notice for Progressive Scan Outputs  
Consumers should note that not all high definition television  
sets are fully compatible with this product and may cause  
artifacts to be displayed in the picture. In case of picture prob-  
lems with 525 progressive scan output, it is recommended  
that the user switch the connection to the ‘standard definition’  
output. If there are questions regarding your TV set compat-  
ibility with this 525p DVD player, please contact our customer  
service center.  
Hint  
Note to CATV system installer  
• Remember to read the instructions along with the video head  
cleaner before use.  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in  
particular, specifies that the cable ground should be  
connected to the grounding system of the building,  
as close to the point of cable entry as practical.  
• Clean video heads only when problems occur.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Video Cassettes and Discs  
Playable Video Cassettes  
Use only cassettes marked  
with this unit.  
Playable Discs  
Playable  
Mark (logo)  
discs  
Recorded  
signals  
Disc  
size  
Region code  
Disc types  
DVD-Video  
*1, 2, 4,  
6, 10  
or  
DVD-R  
DVD-RW  
*1, 3, 4, 5, 6,  
7, 9, 10  
Example  
12 cm  
or  
8 cm  
Title 1  
Title 2  
Digital video  
(MPEG2)  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1  
Chapter 2  
DVD+RW  
DVD+R  
*1, 3, 4, 5, 6,  
8, 9, 10  
Video CD  
*4, 6, 10, 11  
Digital video  
with audio  
Video CD  
or  
Audio CD  
Example  
Audio CD  
*4, 6, 10  
Track 1  
Track 2  
Track 5  
Track 6  
Track 3  
Track 4  
12 cm  
or  
8 cm  
Digital audio  
MP3  
or  
MP3  
Example  
Group 1  
Group 2  
CD-R  
CD-RW  
Track 1  
Track 3  
Track 2  
Track 4  
Track 5  
Track 6  
*4, 5, 6, 9  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.  
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.  
*3: Discs Recorded in the VR (Video Recording) format cannot be played back.  
*4: Scratched or stained discs may not be played back.  
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-  
erties of discs.  
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if  
they are played back, the sound or video quality will be compromised.  
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depend-  
ing on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,  
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.  
*8: Only the discs recorded in the video format and finalized can be played back.  
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all the  
picture or sound may not be smooth, etc.  
*9: If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.  
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.  
*11: This unit confirms to ver.1.1 and ver.2.0 of Video CD standard with PBC function.  
Ver.1.1 (without PBC function) : You can enjoy playback picture as well as music CD.  
Ver.2.0 (with PBC function) : While using a Video CD with PBC function, “Pbc” appears on the screen and the display.  
NOTE: When playing Video CDs with PBC function, some operations (e.g., track search and repeat tracks) cannot be performed.  
Cancel PBC function temporarily to perform those operations (refer to page 15).  
What is PBC? “PBC” stands for Playback Control.  
You can play interactive software using menu screens. Refer to instructions in the Video CD.  
Unplayable Discs  
NEVER play back the following discs. Otherwise, malfunction may result!  
DVD-RAM / DVD-Audio / CD-i / Photo CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal  
computers / CD-ROM for personal computers  
On the following disc, the sound MAY NOT be heard.  
Super Audio CD  
NOTE: Only the sound recorded on the normal CD layer can be delivered.  
The sound recorded on the high density Super Audio CD layer cannot be delivered.  
Any other discs without compatibility indications  
5
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Connections  
Please refer to “Basic TV Connection” on the front page before you use this unit.  
RF Output Channel  
If channel 3 has been already occupied  
for broadcasting,  
5) After a few seconds, press and hold  
[PLAY B] on the unit for 3 seconds.  
• The RF output channel will change to  
channel 4 from channel 3 and you will  
see a playback picture.  
• When a picture does not appear on the  
TV screen, repeat step 4.  
Hint  
• The RF output channel does not  
change when you adjust track-  
ing during playback. In case RF  
output channel changes, you  
can easily switch it back just  
start the playback again then  
press and hold [PLAY B] on  
the unit for 3 seconds.  
1) Set your TV to channel 4.  
2) Insert a pre-recorded tape into this unit.  
3) Press [SOURCE] on the unit so that the  
VCR SOURCE light is lit.  
If noise appears on the TV screen, press  
[VCR/TV] on the remote control.  
6) Press [STOP C] to stop playback.  
4) Press [PLAY B] once.  
Hint for Cable Box or Satellite Box  
To select channels of the cable box or satellite box  
1) Turn on the unit by pressing [STANDBY-ON], then press  
[VCR/TV]. The STANDBY-ON indicator on the front panel  
(Back of DVD/VCR)  
(Cable box or  
Satellite box)  
ANT-IN  
Satellite or  
Cable TV  
signal  
IN  
OUT  
G
K
H
L
ANT-OUT  
will light, then press [SKIP/CH.  
/
,
/
] to select  
RF cable  
(supplied)  
channel 3 or 4 (the same channel as the output channel of  
the cable box or satellite box).  
• If you use the channel 4, you need to change the unit’s  
RF output to channel 4. Refer to “RF Output Channel”.  
2) At the TV, select channel 3 or 4 (the same channel as you  
have selected at step 1).  
(Back of TV)  
Select this connection when you want to view or record a  
scrambled channel. With this connection, channels cannot be  
changed on the unit. You can view or record ONLY  
the channels you have selected on the cable box or the  
satellite box.  
3) On the cable box or satellite box, select the channel you  
want to view or record.  
While you are recording, only the recorded channel can be viewed.  
Connection to an Audio System  
Method 1  
Method 2  
Dolby Digital decoder,  
MD deck or DAT deck  
Stereo system  
Audio  
COAXIAL  
L
R
Digital audio  
input jack  
Analog audio  
input jacks  
Audio cable  
(supplied)  
Audio Coaxial Digital cable  
(commercially available)  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
DIGITAL  
VIDEO OUT  
AUDIO OUT  
L
AUDIO OUT  
(Analog)  
R
COAXIAL  
DIGITAL  
AUDIO OUT  
DVD/VCR  
or  
DVD  
SETUP > QUICK>  
DOLBY DIGITAL  
Setting  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT OUT  
AUDIO OUT  
Connection  
L
Connecting to a Dolby Digital decoder  
for Dolby Digital audio output.  
R
BITSTREAM  
(DVD mode only)  
Connecting to other equipment (an  
MD deck or DAT deck etc.)  
without Dolby Digital decoder.  
PCM  
Hint  
• Playing a DVD using incorrect settings may generate noise  
distortion and may also damage the speaker.  
* To complete these settings, refer to pages 20-21.  
Hint  
• The audio source on a disc in a Dolby Digital Multi channel surround  
format cannot be recorded as digital sound by an MD or DAT deck.  
• By hooking this unit up to a Multi channel Dolby Digital decoder,  
you can enjoy high-quality Dolby Digital Multi channel surround  
sound as heard in the movie theaters.  
• Playing a DVD using incorrect settings may generate noise  
distortion and may also damage the speakers.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a TV  
Basic Audio  
Method 1  
Method 2  
Method 3  
TV  
AUDIO IN  
L
R
Better picture  
Good picture  
Best picture  
COMPONENT  
VIDEO IN  
Y
Y
S-VIDEO IN  
VIDEO IN  
PB  
CB  
or  
Audio cable  
(supplied)  
P
R
CR  
S-Video cable  
(commercially  
available)  
Video cable  
(supplied)  
DVD/VCR  
DVD/VCR  
AUDIO OUT  
VCR  
Component Video cable  
(commercially available)  
L
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT  
OUT  
OUT  
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
R
R
COAXIAL  
VIDEO OUT  
R
C
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
VCR  
DVD  
AUDIO S-VIDEO  
OUT OUT  
COMPONENT  
COMPONENT  
VIDEO OUT  
VIDEO OUT  
A
or  
Y
DVD  
AUDIO S-VIDEO  
OUT OUT  
DIGITAL  
AUDIO OUT  
C
PB/  
B
VIDEO OUT  
L
C
PR/  
R
R
AUDIO OUT  
(Analog)  
VIDEO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
Hint  
Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy  
protection system.  
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.  
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;  
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to  
“ON” in the SETUP menu, so that the P-SCAN indicator on the front panel lights on. See pages 20 to 21 for more details.  
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not  
be output at all.  
If your TV is not compatible with progressive scanning;  
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the SETUP menu or by pressing and holding  
[PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator light on the front panel turns off.  
After you have completed connections  
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel  
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa-  
nying your TV.  
INPUT MODES FOR COMMON TV BRANDS  
Listed below are inputs for common brand name TV’s.  
Admiral:  
Curtis Mathis:  
GE:  
AUX  
Panasonic:  
RCA:  
Samsung:  
Sanyo:  
Sharp:  
Sony:  
Toshiba:  
Zenith:  
TV/VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
TV/VIDEO  
Hitachi:  
INPUT, AUX  
VIDEO  
JVC:  
VIDEO, VIDEO1, VIDEO2, VIDEO3  
00  
Kenwood:  
LXI-Series:  
Magnavox:  
AUX  
00  
AUX CHANNEL  
VIDEO1, VIDEO2, VIDEO3  
TV/GAME  
00  
7
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation for Use  
To Preset the Channel Again  
1) Press [MENU] until the main menu appears.  
2) Select “CHANNEL SET UP” by using [K//L], then press [B]  
3) Select “AUTO SET UP” by using [K//L], then press [B]. After  
Turn on the Unit for the First Time  
VCR  
Operation described in this manual are  
mainly based on the remote control.  
.
Turn on the TV and set it to channel 3.  
scanning, the tuner stops on the lowest memorized channel.  
1
2
If channel 3 has been already occupied for broadcasting,  
see “RF Output Channel” section on page 6.  
To Change the On-Screen Language  
1) Press [MENU] until the main menu appears.  
2) Select “LANGUAGE SELECT” by using [K/L], then  
press [B].  
3) Select ENGLISH” , “FRANCAISor ESPAÑOLby  
using [K/L] then press [CLEAR/C.RESET].  
Select your language when turning this unit on for the first time.  
Then press [B] to go to next step.  
LANGUAGE SELECT  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
STANDBY-ON  
or  
Hint  
CH 01  
Press [B] to start Auto Set Up.  
3
• If you accidentally select Spanish or French and need English: Press  
[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE.  
Press [B] and select ENGLISH. Finally, press [CLEAR/C.RESET].  
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L]  
button works on the channel number memorized in this unit, [K/L]  
works on all.  
AUTO SET UP  
Do you connect the cable from the cable box or the satellite box to  
the unit’s ANT-IN jack?  
YES  
NO  
Clock Setup  
VCR  
Yes Press [MENU] to exit.  
Refer to “Hint for Cable Box or Satellite Box” section on page 6.  
Press [MENU] and select “CLOCK SET”.  
Then press [B] to go to next step.  
No Please wait for a few minutes. After scanning...  
• The tuner stops on the lowest memorized channel.  
• You can select only the channels memorized in this unit by using  
[SKIP/CH. G//K , H//L] (or [CHANNEL K///L]).  
• If “AUTO SET UP” appears on the TV screen again, check the  
cable connections. Then, press [B] once again.  
1
- M E N U -  
TIMER PROGRAMMING  
AUTO REPEAT  
CHANNEL SET UP  
B CLOCK SET  
[OFF]  
MENU  
LANGUAGE SELECT  
or  
• If the clock is not set, the CLOCK SET screen appears when  
you press [MENU]. In this case, go to step 2.  
Hint  
• Repeat these steps only if either there was a power failure or this  
unit has been unplugged for more than 30 seconds.  
CLOCK SET  
Select the current month.  
Then press [B] to go to next step.  
2
3
MONTH DAY  
1 0 – –  
YEAR  
– – – –  
/
To Select a Channel  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
You can select a channel by using the Number buttons or  
[SKIP/CH.  
G
/
K,  
H/L].  
CLOCK SET  
Select the current day.  
Then press [B] to go to next step.  
Notes for using the Number buttons:  
MONTH DAY  
1 0 0 2  
YEAR  
– – – –  
/
• When selecting cable channels which are higher than 99,  
enter channel numbers as a three-digit number. (for exam-  
ple: 117, press [1], [1], [7])  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
• You must precede single-digit channel numbers with a zero.  
(for example: 02, 03, 04 and so on)  
CLOCK SET  
Select the current year.  
Then press [B] to go to next step.  
4
5
MONTH DAY  
1 0 0 2  
YEAR  
/
2 0 0 6  
To Add or Delete Channels  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
VCR  
Select the current hour.  
Then press [B] to go to next step.  
CLOCK SET  
- M E N U -  
Press [MENU] to select “CHANNEL SET UP”.  
Then press [B] to go to next step.  
MONTH DAY  
1 0  
YEAR  
1
/
0 2 MON 2 0 0 6  
TIMER PROGRAMMING  
AUTO REPEAT  
B CHANNEL SET UP  
CLOCK SET  
[OFF]  
HOUR MINUTE AM/PM  
0 5  
:
– –  
– –  
MENU  
or  
LANGUAGE SELECT  
or  
CLOCK SET  
Select the current minute.  
Then press [B] to go to next step.  
• If the clock is not set, the “CLOCK SET” screen appears when  
6
7
8
MONTH DAY  
1 0  
YEAR  
you press [MENU]. In this case, press [MENU] again.  
/
0 2 MON 2 0 0 6  
HOUR MINUTE AM/PM  
CHANNEL SET UP  
Select “MANUAL SET UP”.  
Then press [B] to go to next step.  
0 5  
:
4 0  
– –  
2
3
4
5
or  
AUTO SET UP  
B MANUAL SET UP  
or  
CLOCK SET  
Select “AM” or “PM”.  
MONTH DAY  
1 0  
YEAR  
/
0 2 MON 2 0 0 6  
MANUAL SET UP  
or  
HOUR MINUTE AM/PM  
Select the channel to be added or deleted.  
0 5  
:
4 0  
P M AM  
B PM  
CHANNEL 30 (CATV)  
ADD  
or  
or  
or  
To exit the CLOCK SET screen  
MANUAL SET UP  
Select “ADD” or “DELETE”.  
CHANNEL 30 (CATV)  
DELETE  
or  
Hint  
• To go back one step, press [s] (during steps 2 to 7).  
• Your clock setting will be lost if either there is a power failure or this  
unit has been unplugged for more than 30 seconds.  
CLEAR/  
To exit the menu  
C. RESET  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Overview  
Front Panel Indicator  
Lights up when the progressive scan system is activated.  
Lights up when the inserted  
disc is being played back.  
Blinks when an unacceptable  
disc is inserted.  
Lights up during a recording.  
Blinks when a recording is paused.  
Lights up when this unit  
is in the DVD mode.  
OPEN/  
CLOSE  
VCR  
DVD  
P-SCAN  
PLAY  
REC  
TIMER  
VIDEO  
STANDBY-ON  
AUDIO  
REW  
F.FWD  
STOP/EJECT  
PLAY  
RECORD  
IR  
SOURCE  
PREV  
STOP  
PLAY  
NEXT  
CHANNEL  
Lights up when this unit is in the VCR mode.  
Lights up when power is on.  
Lights up when the Timer Recording  
or an OTR recording has been set.  
VCR / DVD Switching  
You must select which component you wish to operate with  
[SOURCE] first, as this product is a combination of a VCR  
and a DVD player.  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
OPEN/  
CLOSE  
VCR  
DVD  
P-SCAN  
PLAY  
1
4
7
2
5
8
3
6
9
SOURCE  
PREV  
STOP  
PLAY  
NEXT  
SKIP/CH.  
CHANNEL  
VCR MODE  
VCR/TV  
SLOW  
Press [VCR] on the remote control.  
0
VCR  
+10  
DVD  
(Verify that the VCR SOURCE light is lit.)  
VCR button  
DVD button  
DISPLAY  
PAUSE  
PLAY  
DVD MODE  
Press [DVD] on the remote control.  
(Verify that the DVD SOURCE light is lit.)  
STOP  
SOURCE button  
RECORD  
MENU  
VCR  
DVD  
ENTER  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
MODE  
ZOOM  
C. RESET  
Hint  
SOURCE  
DVD SOURCE light  
VCR SOURCE light  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
• Pressing only [SOURCE] on the front panel DOES NOT switch the  
mode of the remote control. You MUST select the correct mode on  
the remote control.  
Front & Rear Terminals  
2
3
REC  
TIMER  
DVD  
DVD/VCR  
VCR  
ANT-IN  
COMPONENT  
VIDEO OUT  
AUDIO OUT  
DIGITAL  
AUDIO S-VIDEO  
I
VCR  
OUT  
OUT  
AUDIO OUT  
VIDEO  
ANT-IN  
STANDBY-ON  
AUDIO  
REW  
F.FWD  
STOP/EJECT  
PLAY  
RECORD  
IR  
Y
L
4
O IN  
AUDIO IN  
L
I
IDEO IN  
ANT-OUT  
R
1
10  
9
C
/
PB  
B
ANT-OUT  
COAXIAL  
VIDEO OUT  
VIDEO IN  
R
C
/
PR  
R
[Front Panel]  
[Rear Panel]  
8 7  
6
5
6
3
6: VIDEO IN jack  
1: DVD AUDIO OUT (analog) jacks  
Connect a cable coming from the video out jack of a camcorder,  
another VCR or an audio-visual source (laser disc player, video disc  
player, etc.) here.  
7: DVD/VCR VIDEO OUT jack  
Connect the supplied video cable here through the video in jack of a  
television.  
Connect the supplied audio cable here through the audio in jacks of  
a television or other audio equipment. (DVD only)  
2: DVD/VCR AUDIO OUT jacks  
Connect the supplied audio cable here through the audio in jacks of  
a television or other audio equipment.  
3: AUDIO IN jack  
Connect audio cable coming from the audio out jack of a camcorder,  
another VCR or an audio source here.  
8: COMPONENT VIDEO OUT jacks  
Connect optional COMPONENT VIDEO cables here through the  
COMPONENT VIDEO in jacks of a television. (DVD only)  
9: S-VIDEO OUT jack  
Connect an optional S-VIDEO cable here through the S-VIDEO in  
jack of a television. (DVD only)  
4: ANT-IN jack  
Connect your antenna or cable box here.  
5: ANT-OUT jack  
Connect the supplied RF cable to the antenna input jack of a television.  
10: DIGITAL AUDIO OUT COAXIAL jack  
Connect an optional coaxial digital audio cable here through the  
coaxial digital audio in jack of a decoder or audio receiver. (DVD only)  
9
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DVD mode  
VCR mode  
Disc/Tape  
OPEN/CLOSE  
/EJECT  
Button  
STANDBY-ON  
SPEED  
AUDIO  
(Alphabetical order)  
1
4
7
2
5
8
0
3
6
To select channel.  
The +10 button has no  
effect in VCR mode.  
1
4
7
2
5
8
3
6
9
To select chapter or title  
directly.  
To select track directly.  
SKIP/CH.  
9
+10  
VCR/TV  
SLOW  
To search forward/back-  
ward through a disc.  
To begin slow forward/  
reverse playback in the  
pause mode.  
To search forward/backward  
through a disc.  
To begin slow forward playback  
in the pause mode. (VCD)  
To forward/backward a  
tape.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
A-B  
To repeat between your  
chosen point of A and B.  
To repeat between your chosen  
point of A and B. (CD/VCD)  
PLAY  
STOP  
ANGLE  
AUDIO  
To select camera angles  
on a disc.  
RECORD  
MENU  
ENTER  
To select audio languages To select STEREO,  
on a disc.  
L-ch or R-ch. (CD/VCD)  
SETUP TOP MENU  
RETURN  
To clear the markers. (CD/VCD)  
To remove status number in  
program input. (CD/MP3)  
SEARCH  
MODE  
CLEAR/  
MODE  
ZOOM  
C. RESET  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
CLEAR/  
C. RESET  
SUBTITLE  
T-SET  
To exit the VCR Menu.  
To reset the tape counter.  
ANGLE  
REPEAT  
A-B  
To clear the numbers entered  
To cancel the point for A-B incorrectly.  
repeat.  
To cancel the point for A-B  
repeat. (CD/VCD)  
DISPLAY  
DVD  
To display the current disc  
mode.  
To display the current time,  
tape counter, and channel.  
To display the current disc mode.  
To select the DVD output mode. To select the DVD output mode.  
To activate the remote  
control in DVD mode.  
To activate the remote  
control in DVD mode.  
To select an item  
on the VCR Menu.  
ENTER  
To advance to the  
next VCR Menu.  
To go back one  
step during clock  
and timer setting.  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
Installing the Batteries for  
the Remote Control  
MENU  
MODE  
Install two AA batteries (supplied)  
matching the polarity indicated inside  
battery compartment of the remote  
control.  
To call up the Menu on a  
disc.  
To call up the file list. (MP3)  
To call up the VCR Menu.  
To arrange the playing order or  
play randomly. (CD/MP3)  
To set virtual surround on/off.  
To set black level on/off. (VCD)  
To set black level on/off.  
To set virtual surround  
on/off.  
OPEN/CLOSE  
/EJECT  
To open or close the disc  
tray.  
To eject the video  
cassette from the VCR.  
1
2
3
To open or close the disc tray.  
To pause tape playback or  
recording.  
To advance playback one  
frame at a time.  
To pause disc playback.  
To pause disc playback.  
PAUSE  
To advance playback one To advance playback one frame  
frame at a time.  
at a time. (VCD)  
To begin disc playback.  
To begin disc playback.  
To begin tape playback.  
PLAY  
Keep in mind the following when using  
the remote control:  
RECORD  
To start a recording or One  
Touch Recording.  
Make sure that there is no obstacle  
between the remote control and the  
remote sensor on the unit.  
To play a track or disc repeatedly.  
(CD/VCD)  
To play a track, group or disc  
repeatedly. (MP3)  
REPEAT  
RETURN  
To play a chapter or title  
repeatedly.  
• The maximum operable ranges from  
the unit are as follows.  
To return to the previous  
operation in menu.  
To return to the previous  
operation in menu.  
SEARCH  
MODE  
To search chapter, title or To search track.  
- Line of sight: approx. 23 feet (7m)  
- Either side of center:  
approx. 16 feet (5m) within 30°  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (3m) within 30°  
To call up the index or time  
search menu.  
time.  
To search time. (CD/VCD)  
To set or search the markers. (CD/VCD)  
To set or search the markers.  
SETUP  
To call up the DVD setup  
menu.  
To call up the DVD setup menu.  
To change channels.  
To adjust the tracking  
manually during playback.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
SLOW  
• To view the tape in slow  
motion.  
SPEED  
To select the recording  
speed.  
STANDBY-ON  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
To stop playback or  
recording.  
STOP  
Hint  
SUBTITLE  
T-SET  
To put the VCR into  
standby mode for a Timer  
Recording.  
• Do not mix alkaline and manganese  
batteries.  
To select subtitles on a  
disc.  
• Do not mix old and new batteries.  
To return to the top file of the  
highest hierarchy in the program  
and file list. (MP3)  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output mode.  
To activate the remote  
control in VCR mode.  
VCR/TV  
ZOOM  
To select DVD position or To select CD/MP3 position or TV To select VCR position or  
TV position.  
position.  
TV position.  
To magnify part of a  
picture. (x2/x4)  
To magnify part of a picture.  
(x2)(VCD)  
10  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Functions  
Playback  
Before:  
Turn on the TV and set it to channel 3.  
Hint  
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.  
1
VCR  
• When a tape  
without record tab  
is inserted, the unit  
will start playback  
automatically.  
Tracking will be  
automatically  
adjusted upon play-  
back. To adjust the  
tracking manually,  
press [SKIP/CH.  
G/K, H/L] (or  
[CHANNEL K/L])  
during playback.  
4
1 Insert a video  
2
4
To start playback  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
cassette into this unit.  
1
4
7
2
5
8
3
6
9
PLAY  
SKIP/CH.  
VIDEO  
STANDBY-ON  
AUDIO  
REW  
F.FWD  
STOP/EJECT  
PLAY  
VCR/TV  
SLOW  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
3
To stop playback  
To eject the cassette  
OPEN/CLOSE  
/EJECT  
STOP  
PLAY  
3 2  
4
2
STOP  
3
Other Operations  
To cue or review picture during playback (Picture Search)  
Counter Reset  
Press [CLEAR/C.RESET].  
To play back in slow motion (Slow mode)  
Press [SLOW] during playback or the still mode.  
• If the noise bars appear on the TV screen, you can reduce it  
Use [g] or [h ]([F.FWD g] or [REW h]).  
• Press it again and the unit will search in super high speed.  
(in the SLP mode only)  
To freeze the picture on TV screen during playback (Still mode)  
Press [PAUSE F]. Each time you press the button, the pic-  
by using [SKIP/CH. G/K, H/L] (or [CHANNEL  
Auto Rewind  
When a tape reaches its end during playback, fast-forward  
or recording (except Timer Recording and One Touch  
Recording), the tape will automatically rewind to the beginning.  
After rewinding finishes, the unit will eject the tape.  
K/L]).  
ture will be forwarded by one frame.  
If the picture begins to vibrate vertically in the still mode,  
stabilize the picture by using [SKIP/CH. G/K, H/L] (or  
[CHANNEL  
K/L]).  
• If the picture is distorted or rolling vertically, adjust the verti-  
cal hold control on your TV if equipped.  
Hint  
• Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.  
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].  
Index Search  
Time Search  
You can skip the program backward and forward by the Index  
Mark.  
You can search backward and forward a specific length of  
time on a tape.  
VCR  
VCR  
• Insert a tape into this unit.  
• Insert a tape into this unit.  
Press [SEARCH MODE] once.  
Press [SEARCH MODE] twice.  
1
1
SEARCH  
SEARCH  
MODE  
MODE  
TIME SEARCH  
INDEX SEARCH  
– : – –  
– –  
Select the desired length of time for fast forwarding or  
To select Index Mark  
2
2
rewinding.  
INDEX SEARCH  
0 3  
TIME SEARCH  
2 : 5 0  
or  
01 ~ 20  
or  
CURRENT PROGRAM  
0:01~ 9:59  
Beginning  
of the tape  
End of  
the tape  
(1 minute~9 hours and 59 minutes)  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02  
01  
01  
02  
03  
To rewind  
3
INDEX MARK  
ss  
To rewind  
3
4
ss  
To fast forward  
BB  
To fast forward  
BB  
After searching, it automatically starts playback.  
4
PLAYB  
After searching, it automatically  
starts playback.  
PLAYB  
Hint for Index Search & Time Search  
• These functions are not available during recording.  
• Press [STOP C] to stop the search.  
• If a tape ends during a search, your search will be canceled and  
the tape will rewind to the beginning.  
Hint  
The Index Mark will be made automatically at the beginning of each recording.  
• The time gap between Index Marks should be greater than 1 minute  
for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.  
11  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Repeat  
This function will playback a tape repeatedly from the beginning when the tape reaches the end.  
VCR  
Press [B] for  
“AUTO REPEAT”, “ON” or “OFF”.  
- M E N U -  
- M E N U -  
Press [MENU], and choose  
“AUTO REPEAT” during playback.  
2
1
TIMER PROGRAMMING  
TIMER PROGRAMMING  
B AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[OFF]  
B AUTO REPEAT  
[ON]  
CHANNEL SET UP  
CLOCK SET  
MENU  
LANGUAGE SELECT  
LANGUAGE SELECT  
or  
Hint  
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.  
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.  
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.  
Recording  
Recording & OTR (One Touch Recording)  
Before: Turn on the TV and set it to channel 3.  
1
2
3
6
• If channel 3 has been already occupied for  
broadcasting, see “RF Output Channel” section on  
page 6.  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
VCR  
1
4
7
2
5
8
3
6
9
REC  
TIMER  
SKIP/CH.  
VIDEO  
1
3
Insert a cassette with 2 Select the channel  
tab into this unit. to record.  
STANDBY-ON  
AUDIO  
REW  
F.FWD  
STOP/EJECT  
PLAY  
RECORD  
IR  
VCR/TV  
SLOW  
2
CHANNEL  
1
4
7
2
5
8
0
3
6
9
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
SKIP/CH.  
or  
5 6  
4
PLAY  
STOP  
Accidental erasure prevention  
To prevent accidental recording on a recorded  
cassette, remove its record tab. To record on  
it later, cover the hole with adhesive tape.  
5
4
RECORD  
MENU  
Press [SPEED] to select the desired tape speed.  
ENTER  
SPEED  
SETUP TOP MENU  
RETURN  
Record tab  
Tape Speed  
Type of tape  
SP mode  
Recording/Playback Time  
T60  
T120  
2hours  
6hours  
T160  
1hour  
3hours  
2-2/3hours  
8hours  
SP  
You CAN NOT dub a DVD to a videotape.  
SLP mode  
To stop recording temporarily (Pause mode)  
Press [PAUSE F].  
4 Press [RECORD] repeatedly to select the  
desired recording length.  
RECORD  
• During the rec-pause mode, five  
C
marks appear on the TV screen. Each  
C
mark represents one minute.  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
• Press it again to resume recording.  
• Pause mode will be automatically canceled after 5 minutes to prevent damage  
to the tape and the video head.  
REC  
OTR(8:00)  
OTR(7:30)  
5 To stop recording  
6 To eject the  
recorded cassette  
Hint  
OPEN/CLOSE  
/EJECT  
• If you want to watch one channel while recording another...  
1) If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.  
2) You cannot record one channel while watching another if you have a cable box or satellite receiver.  
STOP  
Timer Recording  
VCR  
Select the desired date.  
Then press [B] to go to next step.  
Insert a tape with its record tab into the unit.  
4
5
Press [MENU], then select “TIMER PROGRAMMING”.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
1
or  
- M E N U -  
TIMER PROGRAMMING  
1
DATE  
1 0 / 2 3 MON  
B TIMER PROGRAMMING  
PROG  
DATE  
START TIME  
END TIME  
CHANNEL  
REC SPEED  
12345678  
MENU  
START TIME – – : – – – –  
END TIME – – : – – – –  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[OFF]  
CHANNEL  
– –  
LANGUAGE SELECT  
REC SPEED – –  
or  
Available program number flashes.  
• You can set a program one year in advance.  
Select an empty program number.  
Then press [B] to go to next step.  
PROGRAM NUMBER  
DATE – – / – –  
1
2
3
Select the desired start time (hour).  
START TIME – – : – – – –  
END TIME – – : – – – –  
Then press [B] to go to next step.  
CHANNEL  
– –  
REC SPEED – –  
or  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE 1 0 / 2 3 MON  
or  
1
START TIME 0 7 : 3 0 – –  
END TIME – – : – – – –  
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.  
Then press [B] to go to next step.  
CHANNEL  
– –  
PROGRAM NUMBER  
1
REC SPEED – –  
B
ONCE  
DAILY  
WEEKLY  
or  
or  
12  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select “AM” or “PM”.  
Then press [B] to go to next step.  
Press [SUBTITLE/T-SET] to set timer standby mode.  
6
10  
SUBTITLE  
ONE TIME PROGRAM  
PROGRAM NUMBER  
T-SET  
1
DATE  
1 0 / 2 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME – – : – – – –  
• TIMER indicator on the front panel lights up. The unit will  
change to the DVD mode.  
or  
CHANNEL  
– –  
REC SPEED – –  
AM  
B PM  
Hint  
Repeat the procedure in steps 5 and 6 to set the end time.  
• To go back one step, press [s] during steps 3 to 9.  
7
8
To Check, Correct or Cancel a Timer Program  
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote  
Select the desired channel.  
Then press [B] to go to next step.  
ONE TIME PROGRAM  
control.  
PROGRAM NUMBER  
1
2) Select main menu by pressing [MENU]  
3) Select “TIMER PROGRAMMING” by using [K/L], then  
press [B].  
.
DATE 1 0 / 2 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
or  
CHANNEL  
1 6  
REC SPEED – –  
4) Select the program number which you want to check by  
using [K/L]. The details of the program you selected will  
appear on the TV screen.  
If you have connected the unit to a cable box or satellite  
box as the connection on page 6, select the VCR to  
channel 3 or 4 (the RF output channel of the VCR). Then,  
select the desired channel at the cable box or satellite box.  
Leave the cable box or satellite box on for Timer Recording.  
Go to the digit you want to change by using [s/B].  
Then, enter correct numbers by using [K/L].  
You may cancel the entire program by pressing [s]  
while the program number blinks.  
Select the desired recording speed, then press  
9
5) Press [CLEAR/C.RESET] to exit.  
6) Press [SUBTITLE/T-SET] to return to timer standby  
mode.  
[CLEAR/C.RESET].  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE  
1
CLEAR/  
C. RESET  
1 0 / 2 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
or  
CHANNEL  
1 6  
REC SPEED SP  
To cancel a Timer Recording in progress  
B SP  
SLP  
Press [STOP/EJECT  
C
A] on the unit.  
• To set another program after step 9, press [B].  
Then, continue with step 2.  
Hints for OTR and Timer Recording  
Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR  
mode, then press [SUBTITLE/T-SET].  
• If a tape is not in the unit or does not have the record tab, TIMER indicator on the front panel blinks and Timer Recording  
cannot be performed. Please insert a recordable tape.  
• When Timer Recordings are set, TIMER indicator on the front panel lights up. To use the VCR as usual until the time for the  
recording, press [SUBTITLE/T-SET] so that TIMER indicator light turns off. Press [VCR/TV] to choose the VCR position.  
Select either VCR or DVD mode, then continue with the other features as described in this manual.  
After an OTR or a Timer Recording has been set, this unit operates as follows:  
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the  
remote control or [STOP/EJECT  
C
A] on the unit, then press [VCR] to activate the VCR function again.  
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.  
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT  
C
A] on the unit, then  
press [VCR] to activate the VCR function again.  
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after  
you canceled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you  
operate.  
When an OTR or a Timer Recording is completed...  
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,  
and TIMER indicator on the front panel lights to indicate the unit is in the timer standby mode.  
• TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby.  
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be  
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.  
Press [STOP/EJECT  
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is  
off.  
• Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer  
Recording is in standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control,  
C
and then press [SOURCE] on the front panel or [VCR] on the remote control.  
If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking.  
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the  
other DVD features as described in this manual.  
NOTE (for Timer Recording) :  
• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.  
13  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copying a Video Tape  
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.  
(Back of TV)  
(Back of another source)  
(Back of DVD/VCR*)  
DVD/VCR  
AUDIO OUT  
VCR  
2
AUDIO OUT  
1
or  
ANT-IN  
L
Connect  
AUDIO IN  
VIDEO IN  
Connect  
R
VIDEO OUT
VIDEO OUT  
ANT-OUT  
RF cable  
(supplied)  
*Front input jacks are also available  
Audio/Video cables  
(commercially available)  
7) To stop recording, press [STOP/EJECT  
C
A] on the  
1) Insert a pre-recorded tape into another VCR for playing.  
recording unit, then stop playback of the tape in another  
source.  
2) Insert a tape with its record tab into this unit for recording.  
3) Press [SPEED] on the remote control of the recording  
unit to select the desired recording speed (SP/SLP).  
4) Select the “L1” or “L2” position on the recording unit.  
Hint  
• For best results during dubbing, use the front panel controls  
whenever possible. The remote control might affect another  
source’s operation.  
• To use the input jacks on the back of this unit, select  
“L1” position by pressing [0], [0], [1] on the remote  
control or [CHANNEL  
K
/L  
]
on this unit.  
• Always use video-quality shielded cables with RCA-type  
connectors. Standard audio cables are not recommended.  
• You can use a video disc player, satellite receiver or other audio/  
video component with Audio / Video outputs.  
• “L1” or “L2” is found before the lowest memorized channel.  
(Example: CH02)  
• To use the input jacks on the front of this unit, select  
“L2” position by pressing [0], [0], [2] on the remote  
control or [CHANNEL  
K/L] on this unit.  
5) Press [RECORD] on the recording unit.  
6) Begin playback of the tape in another source.  
• “L2” input jacks are on the front of this unit.  
14  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Functions  
Playback  
Before: Turn on the TV, amplifier and any other components which are connected to this unit.  
Make sure the TV and audio receiver (commercially available) are set to the correct channel.  
1
2 2 4 3  
DVD  
Page 16  
(
)
OPEN/  
CLOSE  
VCR  
DVD  
P-SCAN  
PLAY  
1
2
3
4
Press [STANDBY-ON] to turn on the DVD/CD Player.  
Press [OPEN / CLOSE] and insert a disc with label facing up.  
Press [PLAY B ] to start playback.  
REC  
TIMER  
VIDEO  
STANDBY-ON  
AUDIO  
REW  
F.FWD  
STOP/EJECT  
PLAY  
RECORD  
IR  
SOURCE  
PREV  
STOP  
PLAY  
CHANNEL  
2
Press [STOP C ] to stop playback.  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
TIP: You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)  
SPEED  
AUDIO  
1
2
1
4
7
2
5
8
3
6
9
Hint  
SKIP/CH.  
• When you play an MP3 file, details on page 16.  
VCR/TV  
SLOW  
A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.  
Some DVDs may be played from title 2 or 3 due to specific programs.  
The operation may vary when you playback DVDs with disc menu or Video CDs with PBC. Refer to the manual accompanying the disc for details.  
During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is  
being switched to the 2nd layer. This is not a malfunction.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
3
4
PLAY  
STOP  
Canceling and Calling Back PBC Function  
Fast Forward / Reverse Search  
DVD  
E
1
Insert a Video CD and press [STOP C], and then press the Number  
buttons to enter the desired Track number. PBC function is now  
canceled and the playback of the Video CD will start. To call back  
PBC function, press [STOP C] twice, and then press [PLAY B].  
Press [h] or [g] repeatedly during playback to  
select the required forward or reverse speed.  
To use [PREV H ], [NEXT G] on this unit  
Pressing and holding [PREV H ] or [NEXT G] on this unit  
will also change forward or reverse playback speed.  
Hint  
• The title menu will appear on the display depend on the disc.  
To continue playback, press [PLAY B].  
DVD menu  
Hint  
• For DVDs, fast forward or reverse search speed is different  
depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20),  
4(x50), 5(x100).  
• For Audio CDs, Video CDs and MP3, approximate speed is 1(x2),  
2(x8), 3(x30).  
Some discs contain menus which allow you to customize DVD playback.  
Press [K / L / s / B ] to select an item, then press [ENTER] (or [PLAY B]).  
Calling up a Menu Screen during Playback  
Slow Forward / Reverse  
DVD  
1
• Press [MENU] to call up the DVD menu.  
• Press [TOP MENU] to call up the title menu.  
Press [h] or [g] repeatedly in the pause  
mode to select the required forward or reverse speed.  
Hint  
• Menu operations may vary depending on the disc. Refer to the  
manual accompanying the disc for details.  
To use [PREV H ], [NEXT G] on this unit  
Pressing and holding [PREV H ] or [NEXT G] on this  
unit in the pause mode will also change forward or reverse  
playback speed.  
Resume  
DVD  
To continue playback, press [PLAY B].  
Press [STOP C] during playback. Resume  
Resume ON  
Hint  
message will appear on the TV screen.  
• Slow forward or reverse speed is different depending on the disc.  
Approximate speed is 1(1/16), 2(1/8), 3(1/2).  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Press [PLAY B], playback will resume from  
the point at which playback was stopped.  
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in  
the slow playback mode are blurred. (Refer to pages 20-21.)  
• Only slow forward is available when playing a Video CD and discs.  
<Example : DVD>  
Hint  
• To cancel resume, press [STOP C] one more time in the stop mode.  
• For MP3, playback will resume from the beginning of the track at  
which playback was stopped.  
Zoom  
DVD  
• The resume information stays on even when the power is turned off.  
Some Video CDs with the PBC function resume playback from the beginning of the track.  
1) Press [ZOOM] during playback.  
2) Press [ZOOM] repeatedly to select the required zoom  
factor: x2, x4 or OFF.  
Paused and Step-by-Step Playback  
DVD  
x2  
x4  
Press [PAUSE F] during playback.  
To continue playback, press [PLAY B].  
DVD  
3) Press [K / L / s / B] to slide the zoomed picture across  
the screen.  
The disc goes forward by one frame each time [PAUSE F] is  
pressed in the pause mode.  
4) To exit zoom mode, press [ZOOM] to select OFF.  
To continue playback, press [PLAY B].  
Hint  
Hint  
• Zooming function does not work while the disc menu is displayed.  
• x4 zoom is not available on some discs.  
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in  
the pause mode are blurred. (Refer to pages 20-21.)  
• The picture may be distorted when you press [PAUSE k] or [h]  
repeatedly in the zoom mode.  
• In the zoom mode, it automatically changes  
zoomed position guide.  
• Only x2 zoom is available on Video CDs.  
x2(x4) to the  
To use [PREV H ], [NEXT G] on this unit  
DVD  
Press once to skip chapters or tracks to a desired point.  
15  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Playback  
MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.  
DVD  
Hint  
• Some selections may take a while to be recognized.  
Insert an MP3-format disc, then the file list will automatically  
appear on the TV screen. Press [MENU] when you want to call  
up the file list if MP3-format disc is already inserted.  
• Press [TOP MENU] to return to the first item.  
• Folders are known as Groups; files are known as Tracks.  
• Folders and MP3 are displayed respectively as  
• A maximum of 255 folders or 999 files may be recognized on one  
disc.  
• Up to 8 hierarchies can be recognized in one folder. File in the 9th  
or deeper hierarchies cannot be played back.  
This player recommends the files recorded under the following  
circumstances:  
3
and  
.
When selecting the folder:  
FILE LIST  
1
DISC NAME  
FOLDER  
MP3  
3
folder name  
folder name  
folder name  
1
2
3
4
ENTER  
folder name  
3
file name  
file name  
file name  
1
2
3
or  
PLAY  
3
3
ENTER  
PLAY  
1/  
2
folder name  
1
• Sampling frequency: 44.1kHz or 48kHz  
• Constant bit rate: 32kbps ~ 320kbps  
• For MP3 file recorded in Variable Bit Rate(VBR), the unit may not  
display the actual elapsed time.  
• Press [B] when you want to go to the next hierarchy.  
• Press [s] when you want to go back to the previous hierarchy  
(except for the top hierarchy).  
To cancel MP3 playback, press [STOP C].  
2
STOP  
Refer to “Resume” on page 15.  
On-Screen Display  
You can check the information about the current disc by pressing [DISPLAY] on the remote control.  
DVD  
DVD  
Angle icon appears only in a case  
multi-angel is available on the DVD.  
DISPLAY  
DISPLAY  
Current playback status  
Current playback status  
4/12 0:03:21 - 0:02:15  
11/16 0:00:00 - 0:03:30  
T
1
2
3
1
2
Remaining time of the current track  
Elapsed time of the current track  
Remaining time of the current chapter  
Elapsed time of the current chapter  
TR(Track):  
DISPLAY  
Current track number / Total tracks  
CH(Chapter):  
Current chapter number / Total chapters  
DISPLAY  
ALL:  
Current track number / Total tracks  
4/12 0:13:45 - 0:45:40  
T
Current repeat setting, if active  
T: Track repeat  
1/3 0:00:00 - 1:23:45  
Remaining time of the current title  
Elapsed time of the current title  
A: All Tracks repeat  
B: A-B repeat  
A
Remaining time of the entire disc  
Elapsed time of the entire disc  
TT(Title):  
Current title number / Total titles  
DISPLAY  
DISPLAY  
Layer numbers, appears only when  
playing a two-layered disc.  
L0: Layer 0 is playing  
3
T
L1  
Hint  
L1: Layer 1 is playing  
For the Audio CDs, when you are playing a disc in PROGRAM or RANDOM  
2
mode,  
PROGRAM (or RANDOM) will be displayed instead of  
.
Current repeat setting, appears only  
when the repeat setting is active.  
C: Chapter repeat  
PBC is displayed when you play the Video CD with PBC function.  
T: Title repeat  
B: A-B repeat  
DVD  
A
DISPLAY  
BIT RATE: The amount of audio and  
video data currently being read  
DISPLAY  
Current playback status  
TRACK 01  
1
2
The name of the file currently in play  
4
DISPLAY  
will be displayed.  
TR(Track):  
Current track number / Total tracks  
1/36 0:01:15  
T
Current repeat setting, if active  
T: Track repeat  
G: Group (folder) repeat  
A: Disc repeat  
DISPLAY  
Elapsed playing time of the current track  
PROGRAM  
RANDOM  
3
4
or  
(Only when you are playing a disc in PROGRAM or RANDOM mode.)  
DISPLAY  
16  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search Functions  
SEARCH MODE does not work during Programmed or Random Playback.  
Using Track Search  
Using Time Search  
DVD  
DVD  
Press [SEARCH MODE].  
Press [SEARCH MODE] repeatedly until the Time Search  
1
1
2
SEARCH  
MODE  
display appears.  
/29  
SEARCH  
TOTAL 1:29:00  
MODE  
PLAY  
Select track number by using the Number buttons within 30 seconds.  
2
Select a desired disc time by using the Number buttons within 30  
1
4
7
2
5
8
0
3
seconds.  
1
4
7
2
5
8
0
3
6
9
6
/29  
TOTAL 1:29:00  
9
+10  
• For the disc with less than 10 tracks, press the track number directly.  
• For discs with more than 10 but less than 99 tracks, to play single-  
digit track, press [0] first, then the track number (e.g. for track 3,  
press [0], [3]). To play a double-digit track, press the track number.  
• For discs with more than 100 tracks, to play a single or a double-  
digit track, press [0] first, then the track number (e.g. for track 3,  
press [0], [0], [3], and for track 26, press [0], [2], [6]). To play a  
triple-digit track, press the track number.  
Hint  
• When there is no need to enter a number, “0” appears automatically.  
For example, “0: 0_: _ _” appears in the Time Search display if the  
total time of the title or track is less than 10 minutes.  
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.  
Time Search is not available when you play the Video CD with PBC function.  
• For Audio CDs, Time Search is not available for Program and  
Random Playback.  
Using [SKIP/CH. G/o, H/p]  
Press [SKIP/CH. G/o, H/p] during playback.  
Marker Setup  
1
Current Track  
DVD  
(TR)  
SKIP/CH.  
PLAY  
TR 1 TR 2 TR 3 TR 4  
This feature allows you to assign a specific point on a disc to be  
called back later.  
SKIP  
SKIP  
Hint  
To set a marker  
[+10] can also bring the Track search display, except for the disc  
with less than 10 tracks. For such a disc, track search can be done  
by just pressing the track number.  
Press [SEARCH MODE] repeatedly until the marker display  
1
appears.  
SEARCH  
MODE  
• For Audio CDs and MP3, Track Search is not available for Program  
and Random Playback.  
PLAY  
Track Search is not available when you play the Video CD with PBC function.  
Select a marker.  
2
Using Title / Chapter Search  
or  
DVD  
Press [ENTER].  
3
ENTER  
Press [SEARCH MODE] once for the Chapter Search.  
Press [SEARCH MODE] twice for the Title Search.  
1
SEARCH  
MODE  
/12  
To return to the marker later  
PLAY  
Press [SEARCH MODE] repeatedly until the marker display  
1
appears.  
SEARCH  
MODE  
Select title/chapter number by using the Number buttons  
within 30 seconds.  
2
1
4
7
2
5
8
0
3
Select the marker.  
6
2
/12  
9
or  
+10  
Press [ENTER] at the desired marker.  
3
Using [SKIP/CH. G/o, H/p]  
ENTER  
Press [SKIP/CH. G/o, H/p] during playback.  
1
Current Chapter  
(CH)  
To exit the marker screen  
CH 1 CH 2 CH 3 CH 4  
SKIP/CH.  
RETURN  
PLAY  
Press [RETURN ].  
SKIP  
SKIP  
1
or  
Current Title  
(TT)  
Hint  
TT 1 TT2 TT3 TT4  
The Marker display will disappear in about 30 seconds when there is no output.  
To clear a marker, select the marker to be cleared at step 2 in the section  
“To set a marker” or “To return to the marker later” and then press  
[CLEAR/C.RESET].  
SKIP  
SKIP  
(If the disc has no chapters)  
Hint  
• Opening the disc tray or turning off the power will erase all markers.  
• Selecting “AC” at step 2 in the section “To set a marker” or “To  
return to the marker later” will also erase all markers.  
• Depending on the disc being played, this function can also be  
performed by directly entering the desired chapter number with the  
Number buttons. Refer to the manual accompanying the disc.  
Marker Setup is not available when you play the Video CD with PBC function.  
17  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat / Random / Programmed Playback  
Repeat Playback  
Random Playback  
DVD  
DVD  
Repeat function is available only during playback.  
This function shuffles the playing order of tracks instead  
of playback in sequence.  
Press [REPEAT] during playback.  
1
Press [MODE] twice.  
RANDOM  
1
CD-DA  
TOTAL 0:45:55  
REPEAT  
PLAY  
MODE  
RANDOM PROGRAM  
--no indication--  
STOP  
PLAY  
<Example : DVD>  
<Example : CD>  
Each time you press [REPEAT] repeat function changes as  
example below.  
Press [PLAY B] to start Random Playback.  
2
(repeat off)  
OFF  
PLAY  
(current chapter repeat)  
(current title repeat)  
(repeat off)  
CHAPTER  
TITLE  
OFF  
Hint  
• To repeat the current track in the random selections, press  
[REPEAT] repeatedly until “ TRACK” appears during playback.  
• To repeat the entire random selections, press [REPEAT]  
repeatedly until “ ALL” appears during playback.  
• During random playback, you cannot go back to the previous track.  
(current track repeat)  
(entire disc repeat)  
TRACK  
ALL  
Programmed Playback  
DVD  
OFF  
(repeat off)  
You may determine the order in which tracks will play.  
TRACK  
GROUP  
ALL  
(current track repeat)  
(current group repeat)  
(entire disc repeat)  
Press [MODE] once.  
1
CD-DA  
TOTAL 0:00:00  
MODE  
STOP  
<Example : CD>  
Hint  
Using [K/L] to select desired track.  
• Repeat setting (except “ALL”) will be cleared when moving to  
another title, chapter, track or group.  
2
3
Press [ENTER].  
CD-DA  
TOTAL 1:03:30  
1
5
3:30  
5:10  
ENTER  
10 4:20  
11 3:00  
12 3:20  
17 4:10  
22 2:50  
2/3  
• Repeat playback are not available with some discs or during repeat  
A-B playback.  
• Repeat playback is not available when you play the Video CD with  
PBC function.  
or  
• Up to 99 tracks can be ordered.  
• If eight or more tracks were in a program, use  
[SKIP/CH. / G//K , H//L] to see all the tracks.  
Repeat A-B Playback  
• While an MP3 folder is open:  
–Press [B] when you want to go to the next hierarchy.  
–Press [s] when you want to go back to the previous  
hierarchy (except for the top hierarchy).  
DVD  
Repeat function is available only during playback.  
Press [PLAY B] to start Programmed Playback.  
Press [A-B] at your desired starting point (A).  
1
A-  
A-B  
PLAY  
PLAY  
Hint  
• Press [CLEAR/C.RESET] at step 2 to erase the most recently  
entered track.  
Press [A-B] at your desired ending point (B).  
2
• To erase all programmed tracks at once, select “ALL CLEAR’’ and  
press [ENTER] at step 2.  
A-B  
A-B  
• While a program is being played back, [STOP C] works as follows;  
Press [STOP C] and [PLAY B] next, so that the programmed  
playback restarts. (CD playback restarts from the current point.  
MP3 playback restarts from the beginning of the current track.)  
Press [STOP C] twice and [PLAY B] next, so that playback  
restarts from the first track in the original order. However, your  
programmed playback can be restarted when you follow the  
above steps. (Your programs are still stored until either the disc  
tray is open or power is turned off.)  
• Point B should be in the same title or track as point A.  
Hint  
• To exit the sequence, press [A-B] so that “OFF” appears.  
• To cancel point A, press [CLEAR/C.RESET] at step 1.  
• This function does not work in the other repeat modes.  
• The A-B Repeat section can only be set within the current title (for  
DVDs), or current track (for Audio CDs, Video CDs).  
• To repeat the current track in the program, press [REPEAT]  
repeatedly until appears during playback.  
TRACK’’  
• To repeat the entire program, press [REPEAT] repeatedly until  
ALL’’ appears during playback.  
18  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Settings  
Subtitle Language  
Camera Angle  
DVD  
DVD  
This unit allows you to select a subtitle language (if available)  
during DVD playback.  
Some DVD discs may contain scenes which have  
been shot simultaneously from various angles. You can  
change the camera angle if the angle icon appears on  
the screen. If the “ANGLE ICON” setting is “OFF” in the OTHERS  
menu, the angle icon will not appear. (Refer to pages 20-22.)  
Press [SUBTITLE/T-SET] during playback.  
1
SUBTITLE  
1.ENG/6  
T-SET  
PLAY  
Press [ANGLE] during playback.  
1
1 / 8  
ANGLE  
Each time you press [SUBTITLE/T-SET], subtitle language  
changes as example below.  
PLAY  
OFF  
ENG  
FRE  
(no subtitles)  
Black Level Setting  
(English subtitles)  
(French subtitles)  
DVD  
Adjust the Black Level Setting to make  
the dark areas of the TV picture brighter.  
Press [MODE] during playback.  
1
ON  
MODE  
PLAY  
To set subtitle ON/OFF  
Press [SUBTITLE/T-SET] during playback.  
Press [ENTER] to  
adjust the black level.  
ENTER  
1
OFF  
2
SUBTITLE  
1.ENG/6  
T-SET  
PLAY  
ON: Makes the dark areas brighter.  
OFF: Shows the original picture as recorded.  
Press [B] to select subtitle ON or OFF.  
2
RETURN  
Press [RETURN  
] to exit.  
3
OFF  
Stereo Sound Mode  
Hint  
If your language is not shown after pressing [SUBTITLE/T-SET] several  
times, the disc may not have that language. However, some discs have  
the subtitle language setting on the disc menu. (Operation varies depend-  
ing on the discs, so refer to the manual along with the disc.)  
DVD  
This unit allows you to select a  
sound mode during CD playback.  
Press [AUDIO] during CD playback.  
1
• When “NOT AVAILABLE” appears on the TV screen, it means no  
subtitle is recorded on the scene.  
• If you choose a language that has a three- letter-language code,  
the code will be displayed every time you change the subtitle  
language setting. If you choose any other languages, ‘---’ will be  
displayed instead. (Refer to page 24.)  
STEREO  
AUDIO  
PLAY  
Each time you press [AUDIO], sound mode changes as example below.  
• Some discs will only allow you to change the subtitle from the disc  
menu. Refer to the manual accompanying the discs for details.  
STEREO  
L-ch  
(right and left channels are active)  
(left channel is active)  
Audio Language  
DVD  
R-ch  
(right channel is active)  
This unit allows you to select an audio language (if multiple  
languages are available) during DVD playback.  
Virtual Surround  
DVD  
Press [AUDIO] to change audio language.  
1
AUDIO  
1.ENG Dolby D 3/2.1ch 48k/3  
You can enjoy stereophonic virtual world on your existing 2  
channel stereo system.  
PLAY  
Press [MODE] twice (once for Audio CD and MP3) during playback.  
1
Each time you press [AUDIO], the audio language changes as  
example below.  
OFF  
MODE  
PLAY  
ENG  
SPA  
FRE  
(English audio)  
(Spanish audio)  
(French audio)  
Press [ENTER] for the desired effect.  
2
ENTER  
1
1: Natural effect  
2: Emphasized effect  
OFF: No effects (original sound)  
RETURN  
Press [RETURN  
] to exit.  
3
Hint  
• Some discs will only allow you to change the audio setting from the  
disc menu. Refer to the manual accompanying the discs for details.  
Hint  
When “OFF” appears on the TV screen, it means audio language is not available.  
Virtual Surround will not be effective if the sound mode is set to something other than  
“STEREO” (for Audio CD and Video CD playback only). Refer to “Stereo Sound Mode”.  
• If your language is not shown after pressing [AUDIO] several  
times, the disc may not have that language. However, some discs  
allow audio language setting on the disc menu. (Operation varies  
depending on the disc, so refer to the manual along with the disc.)  
• When playing back 96kHz with Virtual Surround function, the sound  
will be down sampling at 48kHz and output as digital audio.  
19  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
DVD Setup  
QUICK SETUP Menu  
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.  
1
Press [SETUP] in the stop mode.  
2
Select the desired item.  
ENTER  
SETUP  
or  
STOP  
SETUP  
QUICK  
ENGLISH  
<SETUP MENU>  
A
B
C
P20  
P21  
P21  
Step 5  
Step 5  
Step 5  
Confirm that “QUICK” is selected.  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
4:3 LETTER BOX  
OFF  
BITSTREAM  
SETUP  
QUICK  
CUSTOM  
INITIALIZE  
ENTER  
Refer to the sections “PLAYER MENU”, “TV ASPECT”,  
“PROGRESSIVE” or “DOLBY DIGITAL” section on page 20 or 21.  
CUSTOM Menu  
You can change the settings of the unit.  
QUICK  
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.  
ENTER  
1
Press [SETUP] in the stop mode.  
2
Select “CUSTOM”.  
3
Select the desired item.  
SETUP  
ENTER  
STOP  
or  
or  
<SETUP MENU>  
SETUP  
CUSTOM  
SETUP  
SETUP  
LANGUAGE  
DISPLAY  
AUDIO  
PARENTAL  
OTHERS  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
LANGUAGE menu  
OTHERS menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
SETUP  
LANGUAGE  
SETUP  
DISPLAY  
SETUP  
PARENTAL  
SETUP  
OTHERS  
SETUP  
AUDIO  
PASSWORD  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
DRC  
ON  
Please enter a 4-digit password.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
page 20  
A
page 21  
B
page 21  
C
page 22  
D
page 22  
E
LANGUAGE Setting  
Follow steps 1 to 3 in the “CUSTOM Menu” section on above.  
A
ENTER  
5
Select the desired language.  
4
Select the desired item.  
6
To exit the menu  
SETUP  
ENTER  
or  
or  
AUDIO: *1 *2  
(Default: ORIGINAL)  
Sets the audio language.  
LANGUAGE menu  
Hint  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
*1  
SETUP  
LANGUAGE  
• Language options are not available with  
some discs.  
AUDIO  
ORIGINAL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE: *1 *2  
(Default: OFF)  
Sets the subtitle language.  
• If OTHER is selected on the AUDIO,  
SUBTITLE or DISC MENU screen,  
press four-digit number to enter the code  
for the desired language. (Refer to the  
language code list on page 24.)  
• Only the languages supported by the  
disc can be selected.  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
DISC MENU: *1  
(Default: ENGLISH)  
Sets the language for  
DVD menu.  
Hint  
DISC MENU  
ENGLISH  
FRENCH  
In QUICK SETUP Menu,  
SPANISH  
“PLAYER MENU”, “TV ASPECT”  
“PROGRESSIVE”, or “DOLBY  
DIGITAL” are available. QUICK  
SETUP Menu consists of the  
setting menus frequently used,  
and they are accompanied with  
*2  
QUICK  
PLAYER MENU  
:
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
Language Setting for Audio and Subtitle  
are not available with some discs. Then  
use [AUDIO] and [SUBTITLE/T-SET].  
Details are on page 19.  
(Default: ENGLISH)  
Sets the language for the  
On-screen display.  
QUICK  
mark, You can make all  
settings in CUSTOM Menu.  
20  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY Setting  
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
6 To exit the TV ASPECT  
4
Select the desired item.  
5
QUICK  
TV ASPECT:  
or STILL MODE screen  
(Default: 4:3 LETTER BOX)  
See Hint on the right.  
Select the  
desired  
setting.  
SETUP  
or  
TV ASPECT  
ENTER  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
ENTER  
DISPLAY menu  
OFF  
To complete the  
PROGRESSIVE setting  
or  
SETUP  
DISPLAY  
ENTER  
STILL MODE:  
(Default: AUTO)  
See Hint on the right.  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
Select the  
desired  
setting.  
STILL MODE  
ENTER  
Hint  
TV ASPECT  
STILL MODE  
4:3 LETTER BOX  
AUTO  
AUTO  
FIELD  
FRAME  
TV ASPECT:  
PROGRESSIVE OFF  
Hint  
ENTER  
• Select “4:3 LETTER BOX”,  
so that black bars may  
appear on the top and  
bottom of the screen.  
• Select “4:3 PAN & SCAN”  
for a full height picture with  
both sides adjusted.  
or  
PROGRESSIVE:  
• You can set “PROGRESSIVE”  
to “OFF” in the DISPLAY menu  
or press and hold [PLAY B]  
on the front of the unit for  
more than 5 seconds during  
playback, until the P-SCAN  
indicator light on the front  
panel turns off.  
• When “PROGRESSIVE”  
is “ON”, video signals from  
the unit’s VIDEO OUT and  
S-VIDEO OUT jacks will be  
distorted or not be output at all.  
QUICK  
PROGRESSIVE:  
(Default: OFF)  
See Hint on the left.  
• Select “16:9 WIDE” if a  
wide-screen TV is  
connected to this unit.  
STILL MODE:  
• Select “AUTO” usually.  
• If you select “AUTO”,  
automatically select the best  
resolution setting (FRAME  
or FIELD) based on the  
data characteristics of the  
pictures. (default)  
• If you select “FIELD”, the  
picture in the still mode will  
be stabilized.  
• If you select “FRAME”, the  
picture in the still mode will  
be highly defined.  
An individual picture on the  
TV screen is called a “frame”,  
which consists of two separate  
images called as “field”.  
• Some pictures may be  
blurred if you select “AUTO”  
in the still mode due to their  
date characteristics.  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
4:3 LETTER BOX  
AUTO  
ON  
SETUP  
ENTER  
If there is no picture  
or you do not press  
any buttons for 15  
seconds, Progressive  
scan will switch to  
“OFF” and it will exit  
the setup menu.  
Before proceeding…  
Select “Yes”.  
1. Make sure your TV has progressive scan.  
2. Connect with component video cable  
NOTE: If there is no picture or picture is  
distorted after selecting ‘YES’,  
wait about 15 seconds for auto recovery.  
or  
Activate Progressive?  
NO  
Hint  
YES  
SELECT:  
K
/
L
SET:ENTER  
In QUICK SETUP Menu,  
“PLAYER MENU”, “TV ASPECT”  
“PROGRESSIVE”, or “DOLBY  
DIGITAL” are available. QUICK  
SETUP Menu consists of the  
setting menus frequently used,  
and they are accompanied with  
ENTER  
Select “Yes”.  
Confirm again to use progressive scan.  
If Picture is good, select ‘YES’.  
QUICK  
mark, You can make all  
or  
NO  
YES  
settings in CUSTOM Menu.  
SET:ENTER  
SELECT:  
K
/
L
AUDIO Setting  
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3  
in the “CUSTOM Menu” section on page 20.  
5
6 To exit the menu  
4
Select the desired item.  
DRC (Dynamic Range Control):  
(Default: ON)  
SETUP  
Set to “ON” to compress the range between soft and loud sounds.  
or  
DRC  
ON  
OFF  
DOWN SAMPLING ON  
ON  
BITSTREAM  
Hint  
DOLBY DIGITAL  
BITSTREAM  
AUDIO menu  
ENTER  
DRC:  
SETUP  
AUDIO  
• This function is available  
only on the discs which  
are recorded in the Dolby  
Digital format.  
DOWN SAMPLING:  
(Default: ON)  
Set to “ON” when outputting in 48kHz.  
DRC  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
Set to “OFF” when outputting the original sound.  
DOWN SAMPLING:  
• When playing back a  
96kHz disc with the copy-  
right protection, or when  
Virtual Surround is set to  
“1” or “2”, the sound will be  
down sampled at 48kHz  
and output as digital audio  
even if the “DOWN SAM-  
PLING” is set to “OFF”.  
This function is available  
only on digital output-  
ting of a disc recorded in  
96kHz.  
DRC  
ON  
ON  
OFF  
BITSTREAM  
DOWN SAMPLING ON  
DOLBY DIGITAL  
Hint  
BITSTREAM  
In QUICK SETUP Menu,  
ENTER  
“PLAYER MENU”, “TV ASPECT”  
“PROGRESSIVE”, or “DOLBY  
DIGITAL” are available. QUICK  
SETUP Menu consists of the  
setting menus frequently used,  
and they are accompanied with  
QUICK  
DOLBY DIGITAL:  
(Default: BITSTREAM)  
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.  
• BITSTREAM: outputs Dolby Digital Signals.  
• PCM: converts the Dolby Digital into PCM (2 channel).  
QUICK  
mark, You can make all  
settings in CUSTOM Menu.  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ON  
ON  
PCM  
ENTER  
21  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL Setting  
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)  
This feature prevents your children from viewing inappropriate materials.  
Parental Levels  
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.  
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4
Enter your desired four-digit  
password.  
5
Select “PARENTAL  
LEVEL”.  
6
Select the desired  
level.  
7
To exit the menu  
ENTER  
ENTER  
ENTER  
SETUP  
1
4
7
2
5
8
0
3
6
9
or  
or  
PARENTAL LEVEL  
ALL  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
8 [ADULT]  
7 [NC-17]  
6 [R]  
PARENTAL menu  
CONTROL LEVELS  
• ALL:  
All parental locks are canceled.  
DVD software of any grades (adult/general/children) can be played back.  
SETUP  
PARENTAL  
• Level 8:  
PASSWORD  
• Levels 7 to 2: Only DVD software intended for general use and children can be played back.  
Please enter a 4-digit password.  
• Level 1:  
Only DVD software intended for children can be played back, with those  
intended for adult and general use prohibited.  
TIPS FOR LEVELS  
• 8 [ADULT]:  
• 7 [NC-17]:  
• 6 [R]:  
DVD software of any grades (adult/general/children) can be played back.  
No one under 17 admitted  
or  
Restricted; under 17 requires accompanying parent or adult guardian  
Parental Guidance Recommended  
Unsuitable for children under 13  
Parental Guidance suggested  
If you have set a password  
already, enter the current  
four-digit password.  
• 5 [PGR]:  
• 4 [PG13]:  
• 3 [PG]:  
SETUP  
PARENTAL  
• 2 [G]:  
General Audience  
PASSWORD  
• 1 [KID SAFE]: Suitable for children  
Enter current password.  
Hint  
• DVD-Video discs may not respond to the parental lock settings. Make sure this function  
works with your DVD-Video discs.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4
Enter current four-digit  
password.  
5
Select “PASSWORD  
CHANGE”.  
6
Enter your new  
four-digit password  
(except for 4737).  
7
To exit the menu  
ENTER  
ENTER  
SETUP  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or  
Hint  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
• Record the pass-  
word in case you  
forget it.  
If you forget the  
PARENTAL menu  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
password, press [4],  
[7], [3], [7] at step 4,  
then enter your new  
password. Password  
will be cleared and  
parental levels will  
be set to “ALL”.  
SETUP  
PARENTAL  
PASSWORD  
Enter current password.  
OTHERS Setting  
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4
Select the desired item.  
5
6
To exit the menu  
ANGLE ICON:  
(Default: ON)  
SETUP  
Set to “ON” to show the angle icon when multiple camera  
angles are available during DVD playback.  
or  
OFF  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
ENTER  
OTHERS menu  
SETUP  
OTHERS  
AUTO POWER OFF:  
(Default: ON)  
Set to “ON” to turn this unit off automatically after 30 minutes  
of no use.  
ANGLE ICON  
ON  
AUTO POWER OFF  
ON  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF ON  
OFF  
ENTER  
22  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reset to the Default Setting (Except for PARENTAL Setting)  
1
Press [SETUP] in the  
2
Select “INITIALIZE”.  
3
Select “YES”.  
4
To exit the  
menu  
stop mode.  
SETUP  
SETUP  
STOP  
or  
or  
ENTER  
ENTER  
<SETUP MENU>  
Press  
twice.  
SETUP  
SETUP  
INITIALIZE  
SETUP  
Hint  
If you do not wish  
QUICK  
CUSTOM  
INITIALIZE  
Initialize?  
NO  
YES  
QUICK  
CUSTOM  
INITIALIZE  
to initialize at step  
3, select “NO”.  
Information  
Troubleshooting Guide  
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.  
PROBLEM CORRECTIVE ACTION  
No power.  
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
This unit does not respond to the  
remote control.  
• Check if the power plug is connected to an AC outlet.  
• Check the batteries in the remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the  
remote control.  
• You have to be within 23 feet (7m) of this unit.  
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote  
control.  
• Check if a cassette tape is in this unit.  
• Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal  
sound from the radio in response to your pressing buttons on the remote control, the remote control is working.  
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared  
light through the digital camera.  
Poor picture or noise.  
• Interference signal may be received. Change the position and orientation of the unit.  
Timer recording is impossible.  
• Make sure the Timer Recording is set correctly.  
• Make sure TIMER indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].  
• Make sure the VCR clock is set correctly.  
Cannot go into record mode.  
Playback picture is partially noisy.  
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.  
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR SOURCE light is lit.  
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the  
remote control.  
Cannot view a tape but the audio  
is OK.  
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.  
• Make sure the VCR is not in the Menu mode.  
No or poor, playback picture.  
• Change the RF output channel to CH4. Then select the same channel on the TV.  
• Fine tune your TV.  
TV programs cannot be seen  
normally.  
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.  
• Press [VCR].  
Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR SOURCE light is lit, then set it to the TV posi-  
tion by pressing [VCR].  
Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
making a copy of a video tape.  
Cannot remove the tape.  
No picture.  
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.  
• Connect the video cable firmly.  
• Insert a correct video disc that plays on this unit.  
• Press [DVD] on the remote control. Check if the DVD SOURCE light is lit. Then try other DVD features.  
• Set PROGRESSIVE correctly. Turn it on only if your TV has progressive scan and you are using the Component Video con-  
nections between the unit and the TV. Disable progressive scan for all other connections. (See page 7.)  
Disc cannot be played.  
No sound.  
• Insert the disc.  
• Clean the disc.  
• Place the disc correctly with the label side up.  
• Cancel the parental lock or change the control levels.  
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.  
• Connect the audio cables firmly.  
• Turn the power of the audio component on.  
• Correct the audio output settings.  
• Correct the input settings on the audio component.  
No DTS audio is output  
Distorted picture.  
• This unit does not support DTS audio.  
-This is not a malfunction.  
• Connect this unit directly to the TV.  
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.  
• Although pictures may stop for a moment, this is not a malfunction.  
• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See pages 20-21.  
Audio or subtitle language does not  
match the setup.  
• The selected language is not available for audio or subtitles on the DVD.  
-This is not a malfunction.  
The camera angle cannot be  
changed.  
• The DVD does not contain sequences recorded from different camera angles.  
-This is not a malfunction.  
Audio or subtitle language cannot  
be changed.  
• The DVD does not contain audio source or subtitles in the selected language.  
-This is not a malfunction.  
“Prohibited icon” appears on the  
screen, prohibiting an operation.  
• That operation is prohibited by this unit or the disc.  
-This is not a malfunction.  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.  
• Playback from a desired track and random playback are not available during program playback.  
• Some functions are prohibited on some discs.  
• When playing Video CDs with PBC function, some operations (e.g., select and track repeat) cannot be performed.  
23  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Video Heads :  
Four Heads  
Output signal format :  
NTSC color  
Power source :  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
Power consumption :  
21 W (standby: 3.8W)  
• Designs and specifications are subject  
to change without notice.  
• If there is a discrepancy between  
languages, the default language will be  
English.  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
W : 17 1/8”  
(435mm)  
H : 3 11/16” (94mm)  
D : 9 3/16”  
Weight :  
(233mm)  
Approx 6.0lbs (2.7kg)  
Language Code List  
Language  
Code  
Language  
French [FRE]  
Frisian  
Code  
Language  
Macedonian  
Malagasy  
Malay  
Code  
Language  
Siswat  
Slovak  
Slovenian  
Somali  
Code  
A-B  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Malayalam  
Maltese  
Maori  
Spanish [SPA]  
Sundanese  
Swahili  
Marathi  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
Hindi  
Hungarian [HUN]  
Basque  
O-R  
Bengali;Bangla  
Bhutani  
Bihari  
I-K  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
5861  
5847  
5868  
5860  
5866  
F-H  
Setswana  
Shona  
Sindhi  
Faroese  
Fiji  
Finnish [FIN]  
5261  
5256  
5255  
Singhalese  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language  
setting on page 19. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event  
of defect in materials or workmanship as follows:  
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL  
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES  
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS  
DURATION:  
FOR  
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY  
PARTS: FUNAI CORP. will provide parts to replace defective parts without  
charge for one (1) year from the date of original retail purchase.  
Certain parts are excluded from this warranty.  
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL  
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY  
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN  
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of  
ninety (90) days from the date of original retail purchase.  
IMPORTANT:  
LIMITS AND EXCLUSIONS:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU  
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,  
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE  
CONTACT FUNAI CORP.  
This warranty is extended only to the original retail purchaser. A purchase  
receipt or other proof of original retail purchase will be required together with  
the product to obtain service under this warranty.  
This warranty shall not be extended to any other person or transferee.  
ATTENTION:  
This warranty is void and of no effect if any serial numbers on the product are  
altered, replaced, defaced, missing or if service was attempted by an unau-  
thorized service center. This limited warranty does not apply to any product  
not purchased and used in the United States.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF  
THIS PRODUCT WITHOUT PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
This product is produced for home use and this warranty only covers failures  
due to defects in material or workmanship which occurs during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused  
by repairs, alterations or product not supplied by FUNAI CORP., or damage  
which results from accident, misuse, abuse, mishandling, misapplication, altera-  
tion, faulty installation, improper maintenance, commercial use such as hotel,  
rental or office use of this product or damage which results from fire, flood,  
lightning or other acts of God.  
To obtain warranty service, you must take the product, or deliver the product  
freight prepaid, in either its original packaging or packaging affording an equal  
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI  
CORP. will not reimburse you for any service done by unauthorized service  
providers without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general  
service inquiries, please contact us at:  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY  
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,  
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORPORATION  
Customer Service  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO  
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE  
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU  
Tel :1-800-317-6062  
19900 Van Ness Avenue, Torrance, CA 90501  
24  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Conexiones  
Consulte la “Basic TV Connection” en la página delantera  
antes de utilizar esta unidad.  
Pulse [B] para AJUSTE AUTO.  
CA 01  
3
1
AJUSTE AUTO  
Canal de salida RF  
Si el canal 3 se está utilizando para una transmisión,  
1) Programe su televisor al canal 4.  
Conecta el cable de la caja de canales de cable o la caja de  
satélite en la toma ANT-IN de la unidad?  
2) Inserte una cinta pregrabada en esta unidad.  
3) Pulse [SOURCE] en la unidad para que se encienda la  
luz VCR SOURCE.  
• Si aparece ruido en la pantalla de TV, presione [VCR/TV]  
en el mando a distancia.  
4) Pulse una vez [PLAY B].  
5) Después de unos segundos, pulse [PLAY B] en la uni-  
dad durante 3 segundos.  
• El canal de salida RF cambiará del canal 3 al canal 4 y  
podrá ver una imagen reproducida.  
• Cuando no aparezca una imagen en la pantalla del televi-  
sor, repita el paso 4.  
SI  
NO  
Si Pulse [MENU] para salir.  
No Espere unos minutos.  
Después del escaneo  
• El sintonizador se detiene en el canal memorizado más bajo.  
• Puede seleccionar sólo los canales memorizados en esta unidad  
con [SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).  
• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV,  
verifique las conexiones de cable. Presione nuevamente [B].  
6) Pulse [STOP C] para parar la reproducción.  
Ajuste del reloj  
5
VCR  
Instalación de las pilas del control  
remoto  
2
MENU  
1
- M E N U -  
o
1
2
3
PROGRAMAR  
AUTOREPETIR  
AJUSTE CANAL  
[OFF]  
• Si no se ha ajustado el reloj,  
aparece la pantalla AJUSTE DE  
RELOJ cuando pulse [MENU]. En  
este caso, vaya al paso 2.  
B AJUSTE DE RELOJ  
SELEC. IDIOMA  
Seleccione el mes actual.  
AJUSTE DE RELOJ  
2
3
4
5
6
7
8
Conmutación VCR/DVD  
3
MES  
1 0  
DIA  
– –  
AÑO  
– – – –  
/
HORA MINUTO AM/PM  
– – – – – –  
o
:
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
OPEN/  
CLOSE  
VCR  
DVD  
P-SCAN  
PLAY  
1
4
7
2
5
8
3
6
9
SOURCE  
PREV  
STOP  
PLAY  
NEXT  
SKIP/CH.  
CHANNEL  
VCR/TV  
SLOW  
Seleccione el dia actual.  
AJUSTE DE RELOJ  
0
VCR  
+10  
DVD  
MES  
1 0  
DIA  
0 2  
AÑO  
– – – –  
Botón VCR  
Botón DVD  
DISPLAY  
PAUSE  
/
HORA MINUTO AM/PM  
– – – – – –  
PLAY  
o
:
STOP  
Botón SOURCE  
RECORD  
MENU  
VCR  
DVD  
ENTER  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
Seleccione el año actual.  
AJUSTE DE RELOJ  
SOURCE  
Luz DVD SOURCE  
Luz VCR SOURCE  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
MES  
1 0  
DIA  
0 2  
AÑO  
2 0 0 6  
/
HORA MINUTO AM/PM  
– – – – – –  
o
:
MODO VCR  
Pulse [VCR] en el control remoto. (Compruebe que está encen-  
dida la luz VCR SOURCE.)  
Seleccione la hora actual.  
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
AÑO  
MODO DVD  
Pulse [DVD] en el control remoto. (Compruebe que está encen-  
dida la luz DVD SOURCE.)  
/
0 2 LUN 2 0 0 6  
HORA MINUTO AM/PM  
0 5 – – – –  
o
:
Consejo  
Seleccione los minutos actuales.  
• Si pulsa sólo [SOURCE] en el panel frontal NO cambía el modo  
del control remoto. DEBE seleccionar también el modo correcto en  
el control remoto.  
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
AÑO  
/
0 2 LUN 2 0 0 6  
HORA MINUTO AM/PM  
0 5 4 0 – –  
o
:
Activación de la unidad por primera vez  
4
VCR  
Seleccione “AM” o “PM”.  
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
AÑO  
/
0 2 LUN 2 0 0 6  
HORA MINUTO AM/PM  
o
0 5  
:
4 0  
P M AM  
BPM  
1
2
Encienda el televisor y sintonice al canal 3.  
• Si el canal 3 se está utilizando para una  
transmisión, vea la sección “Canal de salida RF”.  
Para salir de la pantalla AJUSTE DE RELOJ  
LANGUAGE SELECT  
STANDBY-ON  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
o
25  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Modo DVD  
Mode de grabadora de video  
Reproducción de la  
6
Disco/cinta  
Botón  
grabadora de vídeo  
(Orden alfavético)  
1
4
7
2
5
8
0
3
6
Para seleccionar el canal.  
El botón +10 no tiene efecto  
en el modo de grabadora de  
vídeo.  
Antes: Encienda el televisor  
y cambie al canal 3.  
• Si el canal 3 se está utilizando  
para una transmisión, vea la  
sección “Canal de salida RF”.  
• Para seleccionar directamente Para seleccionar directamente la  
el capítulo o el título.  
canción.  
9
+10  
Para buscar en avance/  
retroceso en un disco.  
Para buscar en avance/retroceso en  
un disco.  
Para el avance/retroceso de  
una cinta.  
• Para empezar la reproducción Para empezar la reproducción en  
en avance/retroceso lento  
durante el modo de pausa.  
avance lento durante el modo de  
pausa. (VCD)  
VCR  
A-B  
Para repetir entre los puntos Para repetir entre los puntos A y B  
A y B elegidos.  
elegidos. (CD/VCD)  
Para empezar la  
reproducción  
1
3
2
4
ANGLE  
AUDIO  
Para seleccionar los ángulos  
de la cámara en un disco.  
Para seleccionar el idioma de Para seleccionar ESTÉREO, L-ch o  
audio en un disco.  
R-ch. (CD/VCD)  
PLAY  
Para borrar los marcadores. (CD/VCD)  
Para borrar los marcadores. Para retirar el Nº de estado en la  
Para salir del menú de la  
grabadora de vídeo.  
Para reponer el contador de  
cinta.  
CLEAR/  
C. RESET  
Para borrar los números  
entrados incorrectamente.  
Para borrar el punto para la  
repetición A-B.  
entrada de programa. (CD/MP3)  
Para borrar los números  
entrados incorrectamente.  
Para borrar el punto para la  
repetición A-B. (CD/VCD)  
Para parar la  
reproducción  
Para expulsar  
OPEN/CLOSE  
/EJECT  
STOP  
DISPLAY  
DVD  
Para indicar el modo de disco Para indicar el modo de disco  
actual. actual.  
Para indicar la hora actual,  
contador de cinta y canal.  
Para seleccionar el modo de Para seleccionar el modo de salida  
salida de DVD.  
de DVD.  
Para activar el mando a  
distancia en el modo DVD.  
Para activar el mando a distancia en  
el modo DVD.  
Para seleccionar un  
ítem en el menú de la  
grabadora de vídeo.  
Para avanzar al  
siguiente menú de la  
grabadora de vídeo.  
Para volver un paso  
durante el ajuste del  
reloj y temporizador.  
Reproducción de DVD/  
CD  
7
ENTER  
Para mover el cursor y deter- Para mover el cursor y determinar  
minar su posición.  
su posición.  
Antes: Encienda el televisor,  
amplificador y otros equipos que  
puedan estar conectados a esta  
unidad. Asegúrese que el televisor  
y el sintoamplificador de audio (de  
venta en los comercios) están en el  
canal correcto.  
MENU  
MODE  
Para llamar el menu en un  
disco.  
Para llamar la lista de archivo.  
(MP3)  
Para llamar el menú de la  
grabadora de vídeo.  
Para disponer el orden de reproducción  
o la reproducción aleatoria. (CD/MP3)  
Para activar/desactivar el  
nivel del negro.  
Para activar/desactivar el  
envolvente virtual.  
Para activar/desactivar el  
envolvente virtual.  
Para activar/desactivar el nivel del  
negro. (VCD)  
OPEN/CLOSE  
/EJECT  
Para abrir o cerrar la bandeja Para abrir o cerrar la bandeja del  
Para expulsar el videocasete  
de la grabadora de vídeo.  
DVD  
del disco.  
disco.  
Para hacer una pausa de  
reproducción del disco.  
Para hacer una pausa en la  
reproducción del disco.  
Para hacer una pausa de la  
PAUSE  
reproducción o grabación de la cinta.  
Para avanzar la reproducción Para avanzar la reproducción un  
Para avanzar la reproducción  
un cuadro a la vez.  
1
2
un cuadro a la vez.  
cuadro a la vez. (VCD)  
Para empezar la reproduc-  
ción del disco.  
Para empezar la reproducción del  
disco.  
Para empezar la  
reproducción de la cinta.  
OPEN/CLOSE  
/EJECT  
PLAY  
STANDBY-ON  
RECORD  
Para empezar una grabaciòn  
o una grabaciòn de un toque.  
Ponga un disco con la  
etiqueta hacia arriba.  
Para reproducir repetidamente una  
canción o disco. (CD/VCD)  
REPEAT  
RETURN  
Para reproducir repetidamente  
un capítulo o título.  
• Para reproducir repetidamente una  
canción, grupo o disco. (MP3)  
Para parar la  
Para empezar  
la reproducción  
3
4
Para volver a la operación  
previa en el menú.  
Para volver a la operación previa en  
el menú.  
reproducción  
Para buscar un capítulo,  
título u hora.  
Para colocar o buscar los  
marcadores.  
Para buscar una canción.  
Para buscar la hora. (CD/VCD)  
Para colocar o buscar los  
marcadores. (CD/VCD)  
SEARCH  
MODE  
STOP  
PLAY  
Para llamar el menú de  
búsqueda de índice u hora.  
SETUP  
Para llamar el menú de  
programación de DVD.  
Para llamar el menú de  
programación de DVD.  
Control remoto  
Para cambiar de canal.  
SKIP/CH.  
SKIP/CH.  
8
Para saltar capítulos o titulo. Para saltar canciones.  
Para ajustar manualmente  
elseguimiento durante la reproducción.  
SLOW  
OPEN/CLOSE  
Para ver la cinta en cámara  
lenta.  
STANDBY-ON  
/EJECT  
SPEED  
AUDIO  
SPEED  
1
4
7
2
5
8
3
6
9
Para seleccionar la velocidad  
de grabación.  
SKIP/CH.  
VCR/TV  
SLOW  
STANDBY-ON  
Para encender o apagar la  
unidad.  
Para encender o apagar la  
unidad.  
Para encender o apagar la unidad.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
Para parar la reproducción o  
grabación.  
STOP  
Para parar la reproducción.  
Para parar la reproducción.  
PLAY  
SUBTITLE  
T-SET  
Para poner la grabadora de  
vídeo en el modo de espera para  
una grabación con temporizador.  
STOP  
Para seleccionar subtítulos  
en un disco.  
RECORD  
MENU  
ENTER  
Para volver al archivo superior de la  
jerarquía más alta en el programa y  
en la lista de archivo. (MP3)  
TOP MENU  
VCR  
Para llamar el menú superior  
en un disco.  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
Para seleccionar el modo de  
salida de la grabadora de vídeo.  
Para activar el mando a distancia en  
el modo de la grabadora de vídeo.  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
Para seleccionar la posición  
de la grabadora de vídeo o  
posición del televisor.  
VCR/TV  
ZOOM  
• Para seleccionar la posición de Para seleccionar la posición de  
DVD o posición del elevisor.  
CD/MP3 o la posición del televisor.  
Para ampliar parte de la  
imagen. (x2/x4)  
Para ampliar parte de la imagen.  
(x2)(VCD)  
26  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
Connections  
Please refer to “Basic TV Connection” on the front page  
Press [B] to start Auto Set Up.  
1
CH 01  
3
AUTO SET UP  
before you use this unit.  
RF Output Channel  
If channel 3 has been already occupied for broadcasting,  
1) Set your TV to channel 4.  
Do you connect the cable from the cable box or the satellite box to  
the unit’s ANT-IN jack?  
2) Insert a pre-recorded tape into this unit.  
3) Press [SOURCE] on the unit so that the VCR SOURCE  
light is lit.  
YES  
NO  
Yes Press [MENU] to exit.  
If noise appears on the TV screen, press [VCR/TV] on the  
No Please wait for a few minutes.  
remote control.  
4) Press [PLAY B] once.  
After scanning...  
5) After a few seconds, press and hold [PLAY B] on the  
unit for 3 seconds.  
• The RF output channel will change to channel 4 from  
channel 3 and you will see a playback picture.  
• When a picture does not appear on the TV screen,  
repeat step 4.  
• The tuner stops on the lowest memorized channel.  
• You can select only the channels memorized in this unit by using  
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).  
• If “AUTO SET UP” appears on the TV screen again, check the  
cable connections. Then, press [B] once again.  
6) Press [STOP C] to stop playback.  
Clock Set Up  
5
VCR  
Installing the Batteries for the Remote  
2
Press [MENU] and select “CLOCK SET“.  
Then press [B] to go to next step.  
Control  
- M E N U -  
1
TIMER PROGRAMMING  
AUTO REPEAT  
CHANNEL SET UP  
B CLOCK SET  
[OFF]  
1
2
3
MENU  
LANGUAGE SELECT  
or  
• If the clock is not set, the CLOCK SET screen appears when  
you press [MENU]. In this case, go to step 2.  
CLOCK SET  
Select the current month.  
Then press [B] to go to next step.  
2
3
VCR/DVD Switching  
MONTH DAY  
1 0 – –  
YEAR  
– – – –  
3
/
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
SPEED  
AUDIO  
OPEN/  
CLOSE  
VCR  
DVD  
P-SCAN  
PLAY  
1
4
7
2
5
8
3
6
9
SOURCE  
PREV  
STOP  
PLAY  
NEXT  
SKIP/CH.  
CHANNEL  
CLOCK SET  
Select the current day.  
Then press [B] to go to next step.  
VCR/TV  
SLOW  
MONTH DAY  
1 0 0 2  
YEAR  
– – – –  
0
VCR  
+10  
DVD  
/
VCR button  
DVD button  
DISPLAY  
PAUSE  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
PLAY  
or  
STOP  
SOURCE button  
RECORD  
MENU  
VCR  
DVD  
ENTER  
CLOCK SET  
SETUP TOP MENU  
RETURN  
Select the current year.  
Then press [B] to go to next step.  
4
5
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
MONTH DAY  
1 0 0 2  
YEAR  
/
2 0 0 6  
SOURCE  
DVD SOURCE light  
VCR SOURCE light  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
HOUR MINUTE AM/PM  
– –  
:
– –  
– –  
or  
VCR MODE  
Select the current hour.  
Then press [B] to go to next step.  
Press [VCR] on the remote control. (Verify that the VCR SOURCE  
CLOCK SET  
MONTH DAY  
1 0  
YEAR  
light is lit.)  
/
0 2 MON 2 0 0 6  
DVD MODE  
Press [DVD] on the remote control. (Verify that the DVD SOURCE  
light is lit.)  
HOUR MINUTE AM/PM  
or  
0 5  
:
– –  
– –  
CLOCK SET  
Select the current minute.  
Then press [B] to go to next step.  
Hint  
6
7
8
MONTH DAY  
1 0  
YEAR  
/
0 2 MON 2 0 0 6  
• Pressing only [SOURCE] on the front panel DOES NOT switch the  
mode of the remote control. You MUST select the correct mode on  
the remote control.  
HOUR MINUTE AM/PM  
0 5  
:
4 0  
– –  
or  
CLOCK SET  
Select “AM” or “PM”.  
Turn on the Unit for the First Time  
MONTH DAY  
1 0  
YEAR  
4
/
0 2 MON 2 0 0 6  
VCR  
HOUR MINUTE AM/PM  
or  
0 5  
:
4 0  
P M AM  
B PM  
Turn on the TV and set it to channel 3.  
• If channel 3 has been already occupied for  
broadcasting, see “RF Output Channel” section.  
1
To exit the CLOCK SET screen  
Select your language in the first time you turn on this unit.  
2
Then press [B] to go to next step.  
LANGUAGE SELECT  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
STANDBY-ON  
or  
27  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
DVD mode  
VCR mode  
VCR Playback  
6
Disc/Tape  
Button  
(Alphabetical order)  
Before: Turn on the TV and  
set it to channel 3.  
• If channel 3 has been already  
occupied for broadcasting, see  
“RF Output Channel” section.  
1
4
7
2
5
8
0
3
6
To select channel.  
The +10 button has no  
effect in VCR mode.  
To select chapter or title  
directly.  
To select track directly.  
9
+10  
To search forward/back-  
ward through a disc.  
To begin slow forward/  
reverse playback in the  
pause mode.  
To search forward/backward  
through a disc.  
To begin slow forward playback  
in the pause mode. (VCD)  
VCR  
To forward/backward a  
tape.  
Insert a video  
cassette into this unit.  
To start  
playback  
2
4
A-B  
1
3
To repeat between your  
chosen point of A and B.  
To repeat between your chosen  
point of A and B. (CD/VCD)  
ANGLE  
AUDIO  
To select camera angles  
on a disc.  
PLAY  
To select audio languages To select STEREO,  
on a disc.  
L-ch or R-ch. (CD/VCD)  
To stop  
playback  
To eject the  
cassette  
To clear the markers. (CD/VCD)  
To remove status number in  
program input. (CD/MP3)  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
CLEAR/  
C. RESET  
To exit the VCR Menu.  
To reset the tape counter.  
OPEN/CLOSE  
/EJECT  
To clear the numbers entered  
STOP  
To cancel the point for A-B incorrectly.  
repeat.  
To cancel the point for A-B  
repeat. (CD/VCD)  
DISPLAY  
DVD  
To display the current disc  
mode.  
To display the current time,  
tape counter, and channel.  
To display the current disc mode.  
DVD/CD Playback  
To select the DVD output mode. To select the DVD output mode.  
7
To activate the remote  
control in DVD mode.  
To activate the remote  
control in DVD mode.  
Before: Turn on the TV, amplifier and  
any other components which are  
connected to this unit. Make sure the  
TV and audio receiver (commercially  
available) are set to the correct  
channel.  
To select an item  
on the VCR Menu.  
ENTER  
To advance to the  
next VCR Menu.  
To go back one  
step during clock  
and timer setting.  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
MENU  
MODE  
To call up the Menu on a  
disc.  
To call up the file list. (MP3)  
To call up the VCR Menu.  
To arrange the playing order or  
play randomly. (CD/MP3)  
To set virtual surround on/off.  
To set black level on/off. (VCD)  
DVD  
To set black level on/off.  
To set virtual surround  
on/off.  
OPEN/CLOSE  
/EJECT  
1
3
2
To open or close the disc  
tray.  
To eject the video  
cassette from the VCR.  
To open or close the disc tray.  
OPEN/CLOSE  
/EJECT  
STANDBY-ON  
To pause tape playback or  
recording.  
To advance playback one  
frame at a time.  
To pause disc playback.  
To pause disc playback.  
PAUSE  
To advance playback one To advance playback one frame  
frame at a time.  
at a time. (VCD)  
Insert a disc with  
label facing up.  
To begin disc playback.  
To begin disc playback.  
To begin tape playback.  
PLAY  
To stop  
playback  
To start  
playback  
4
RECORD  
To start a recording or One  
Touch Recording.  
To play a track or disc repeatedly.  
(CD/VCD)  
To play a track, group or disc  
repeatedly. (MP3)  
STOP  
REPEAT  
RETURN  
To play a chapter or title  
repeatedly.  
PLAY  
To return to the previous  
operation in menu.  
To return to the previous  
operation in menu.  
Remote Control  
SEARCH  
MODE  
8
To search chapter, title or To search track.  
To call up the index or time  
search menu.  
time.  
To search time. (CD/VCD)  
To set or search the markers. (CD/VCD)  
To set or search the markers.  
OPEN/CLOSE  
/EJECT  
SETUP  
STANDBY-ON  
To call up the DVD setup  
menu.  
SPEED  
AUDIO  
To call up the DVD setup menu.  
To change channels.  
To adjust the tracking  
manually during playback.  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
VCR/TV  
SLOW  
SLOW  
• To view the tape in slow  
motion.  
0
VCR  
+10  
DVD  
DISPLAY  
PAUSE  
SPEED  
To select the recording  
speed.  
PLAY  
STANDBY-ON  
STOP  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
To stop playback.  
To turn the unit on/off.  
RECORD  
MENU  
To stop playback or  
recording.  
STOP  
ENTER  
SETUP TOP MENU  
RETURN  
SUBTITLE  
T-SET  
To put the VCR into  
standby mode for a Timer  
Recording.  
SEARCH  
MODE  
CLEAR/  
To select subtitles on a  
disc.  
MODE  
ZOOM  
C. RESET  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
To return to the top file of the  
highest hierarchy in the program  
and file list. (MP3)  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output mode.  
To activate the remote  
control in VCR mode.  
VCR/TV  
ZOOM  
To select DVD position or To select CD/MP3 position or TV To select VCR position or  
TV position.  
position.  
TV position.  
To magnify part of a  
picture. (x2/x4)  
To magnify part of a picture.  
(x2)(VCD)  
Printed in China  
E8CK0UD  
1VMN23215 ★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Perreaux Stereo Amplifier SXV2 User Manual
Philips Battery Charger LR14EB4A User Manual
Philips Cell Phone TCD808 A9 User Manual
Philips Vacuum Cleaner FC8042 User Manual
Pioneer Car Stereo System SX 3400 User Manual
PLUS Vision Projector U7 137SF User Manual
Poulan Chainsaw 2250 2450 2550 2550 SE 2555 User Manual
Poulan Snow Blower 422080 User Manual
Prestigio CRT Television P400MW User Manual
PYLE Audio Flat Panel Television P15LCD User Manual