Philips Portable DVD Player MCI8080 12 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
MCi8080/12  
EN User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 First-time setup  
26  
27  
28  
29  
Contents  
Connect to home Wi-Fi/wired network  
Wireless connection: One-touch  
Wi-Fi Protected Setup (WPS)  
Wireless connection: Enter  
encryption key manually  
Wireless connection: Enter IP  
address manually  
1 Important  
Safety  
5
5
6
7
7
Environmental notices  
Recycling  
Trademark notice  
30  
31  
Wired connection  
Wired connection: Enter IP address  
manually  
2 Your MCi8080  
Introduction  
9
9
32  
What’s in the box  
Overview  
9
10  
10  
11  
12  
14  
14  
15  
15  
7 Play from homeWi-Fi/wired  
network  
Top and front view  
Rear view  
33  
33  
33  
33  
36  
37  
38  
39  
39  
41  
41  
41  
42  
43  
44  
45  
45  
46  
46  
47  
47  
Play from the hard disk drive (HDD)  
Connect the HDD to MCi8080  
Library on the HDD  
Remote control  
Touch screen  
Home screen  
Play screen  
Play from the HDD  
Multiroom music  
Text entry  
Stream from a UPnP server  
Library on a UPnP server  
Stream from a UPnP server  
Play Internet radio stations  
Tune to Internet radio stations  
Store preset stations  
3 Prepare  
17  
17  
Connect the HDD to a computer  
Copy MCi8080 files to the  
computer  
17  
17  
Edit favorite stations  
Copy media files to the HDD  
Install batteries into the remote  
control  
Manage Internet radio online  
Manually add stations online  
Stream from online music services  
Stream from Napster  
18  
4 Place the unit  
19  
20  
Search for music/pictures  
Alphanumeric search  
Place the speakers  
Quickjump  
Superscroll  
5 Connect  
21  
Connect the main unit and CD/DVD  
unit  
21  
21  
22  
22  
23  
23  
24  
24  
24  
24  
8 Play music CD/movie DVDs  
48  
48  
48  
49  
49  
49  
49  
50  
50  
50  
Connect speakers  
Connect for disc play  
Connect aTV  
Connect the FM antenna  
Connect external audio devices  
Connect an iPod / iPhone dock  
Turn on/off  
Basic operations  
Use the disc menu  
Access the disc menu  
Play movie discs(DVD/DivX/VCD)  
Pause/Resume/Stop  
Search  
Connect power supply  
Turn on/off  
Select languages for disc play  
Program favorite chapters/tracks  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select play options  
51  
51  
51  
51  
12 Register MCi8080 with Philips  
Benefits  
62  
62  
62  
62  
62  
63  
63  
Select Repeat/Shuffle options  
Zoom in/out image  
Register MCi8080  
Change a camera angle  
Register on the web site  
Register on the device  
Unregister MCi8080  
9 Play FM radio  
Tune to FM radio stations  
Autostore  
52  
52  
52  
52  
52  
52  
53  
53  
Check registration information  
Manual tuning  
Edit preset stations  
Listen to FM radio  
RDS (Radio Data System)  
Use the RDS for clock setting  
13 Maintenance  
64  
64  
Cleaning  
14 Technical data  
65  
69  
70  
15 Troubleshooting  
16 Contact information  
10 Play from an external audio device  
(AUX)  
54  
54  
Play from an external audio device  
11 Settings  
55  
55  
55  
55  
55  
55  
55  
56  
56  
56  
56  
56  
56  
57  
57  
57  
58  
58  
59  
59  
60  
60  
60  
60  
60  
60  
60  
61  
Play modes  
Sound settings  
Bass and treble  
Full sound  
Direct Source  
Audio balance  
Display settings  
Brightness  
Wallpaper  
Screensaver  
Slideshow settings  
Album art  
Clicker sound  
Clock settings  
Alarm  
Sleep timer  
Date and time  
Network settings  
Setup network  
Device name  
USB sharing  
Location and time zone  
Language  
Device information  
Check for software upgrades  
Demo mode  
Restore factory settings  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
h Do not remove the casing of this  
1 Important  
product.  
i Only use this product indoors. Do  
not expose the product to dripping /  
splashing water, rain or high humidity.  
Safety  
j Keep this product away from direct  
sunlight, naked flames or heat.  
Information for Europe:  
k Do not install near any heat sources  
such as radiators, heat registers, stoves,  
or other electrical equipment (including  
amplifiers).  
Know these safety symbols  
l Do not place any other electrical  
equipment on the product.  
m Do not place any sources of danger  
on the product (e.g. objects containing  
liquids, burning candles).  
n This product may include batteries.  
Please refer to safety and disposal  
instructions for batteries in this user  
manual.  
The ‘exclamation mark’ calls attention to  
features for which you should carefully read  
the supplied literature to prevent operating  
and maintenance problems.  
o This product may contain lead and  
mercury. Disposal of these materials  
may be regulated due to environmental  
considerations. Please refer to disposal  
instructions in this user manual.  
The ‘lightening bolt’ symbol indicates  
uninsulated components within the product  
that can cause an electric shock.  
Caution  
To reduce the risk of fire or electric shock, do  
not expose the product to rain or moisture  
and do not place any ojects filled with liquids,  
such as vases, on the product.  
Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
a Read these instructions.  
b Keep these instructions.  
c Heed all warnings.  
d Follow all instructions.  
e Do not use this product near water.  
f Clean only with dry cloth.  
g Do not block any ventilation openings.  
Install in accordance with the  
manufacturer’s instructions.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set your volume control at a low setting.  
Warning  
Slowly increase the sound until you can hear it  
comfortably and clearly, without distortion.  
Never remove the casing of this apparatus.  
Never lubricate any part of this apparatus.  
Never place this apparatus on other electrical  
Listen for reasonable periods of time:  
equipment.  
Keep this apparatus away from direct sunlight,  
naked flames or heat.  
Prolonged exposure to sound, even at  
normally ‘safe’ levels, can also cause hearing  
loss.  
Never look into the laser beam inside this  
apparatus.  
Ensure that you always have easy access to the  
power cord, plug or adaptor to disconnect this  
apparatus from the power.  
Be sure to use your equipment reasonably and  
take appropriate breaks.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Be sure to observe the following guidelines  
when using your headphones.  
Listen at reasonable volumes for reasonable  
periods of time.  
Risk of overheating! Never install this  
apparatus in a confined space. Always leave  
a space of at least four inches around this  
apparatus for ventilation. Ensure curtains or  
other objects never cover the ventilation slots  
on this apparatus.  
Be careful not to adjust the volume as your  
hearing adapts.  
Do not turn up the volume so high that you  
can’t hear what’s around you.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Hearing Safety  
Environmental notices  
Listen at a moderate volume:  
Using headphones at a high volume can impair  
your hearing. This product can produce  
sounds in decibel ranges that may cause  
hearing loss for a normal person, even for  
exposure less than a minute. The higher  
decibel ranges are offered for those that may  
have already experienced some hearing loss.  
This product complies with the radio  
interference requirements of the European  
Community.  
Sound can be deceiving. Over time your  
hearing ‘comfort level’ adapts to higher  
volumes of sound. So after prolonged listening,  
what sounds ‘normal’ can actually be loud and  
harmful to your hearing. To guard against this,  
set your volume to a safe level before your  
hearing adapts and leave it there.  
This product complies with the requirement  
of the 1999/5/EC directive.  
To establish a safe volume level:  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This apparatus includes this label:  
Information about the use of batteries:  
Caution  
Risk of leakage: Only use the specified type of  
batteries. Do not mix new and used batteries.  
Do not mix different brands of batteries.  
Observe correct polarity. Remove batteries  
from products that are not in use for a longer  
period of time. Store batteries in a dry place.  
Risk of injury: Wear gloves when handling  
leaking batteries. Keep batteries out of reach  
of children and pets.  
Class II equipment symbol:  
Risk of explosion: Do not short circuit  
batteries. Do not expose batteries to  
excessive heat. Do not throw batteries into  
the fire. Do not damage or disassemble  
batteries. Do not recharge non-rechargeable  
batteries.  
This symbol indicates that this product has a  
double insulation system.  
Modifications  
Battery disposal information:  
Modifications not authorized by the  
manufacturer may void user’s authority to  
operate this product.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal household  
waste.  
Recycling  
Please inform yourself about the local rules on  
separate collection of batteries. The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment  
and human health.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Trademark notice  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
HDMI, and HDMI logo, and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI licensing LLC  
in the United States and other countries.  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products. The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
The making of unauthorized copies of copy-  
protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
DivX® and DivX Ultra® are registered  
trademarks of DivX, Inc. and are used under  
license. DivX Ultra® Certified to play DivX®  
video with advanced features and premium  
content.  
This item incorporates copy protection  
technology that is protected by U.S. patents  
and other intellectual property rights of  
Rovi Corporation. Reverse engineering and  
disassembly are prohibited.  
ABOUT DIVX VIDEO: DivX® is a digital  
video format created by DivX, Inc. This is  
an official DivX Certified device that plays  
DivX video. Visit www.divx.com for more  
information and software tools to convert  
your files into DivX video.  
ABOUT DIVX VIDEO-ON-DEMAND: This  
DivX Certified® device must be registered in  
order to play DivX Video-on-Demand (VOD)  
content. To generate the registration code,  
locate the DivX VOD section in the device  
setup menu. Go to vod.divx.com with this  
code to complete the registration process and  
learn more about DivX VOD.  
‘DVD Video’ is a trademark of DVD Format/  
Logo Licensing Corporation.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The DVD player on MCi8080 supports these  
disc formats:  
2 Your MCi8080  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
at www.philips.com/welcome.  
Introduction  
MCi8080 can  
Connect a hard disk drive (USB mass  
storage device);  
What’s in the box  
Check and identify the contents of your  
package:  
Connect to the existing home Wi-Fi/  
wired network, which can consist of  
computers and UPnP devices;  
Main unit and CD/DVD unit  
Hard disk drive (HDD) with a USB  
cable  
2 speakers (with connection cables)  
Remote control with batteries  
Composite video cable  
FM T-type antenna  
AC power cord  
Stand for the hard disk drive (HDD)  
Software suite (stored in the  
supplied hard disk drive)  
Connect the existing home audio/  
video systems, including TV, audio  
systems and MP3 players.  
Connect an iPod/iPhone dock.  
With such connections, you can  
Play music stored on a hard disk  
drive (HDD) through the speakers;  
Play Internet radio stations and  
*online music services over the  
Internet;  
Play movie DVDs on a TV;  
Play music/photos stored on a  
computer/UPnP server;  
Quick Start Guide  
Play music from an audio system/  
portable media player through the  
speakers.  
Charge or play your iPod/iPhone  
through this unit.  
Tip  
*Online services are available in some  
countries only.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
Top and front view  
a
b
c
d
e
f
g
4.  
5.  
6.  
7.  
LCD display  
Wi-Fi antenna  
Disc compartment  
1.  
STANDBY  
Press to turn on the set;  
To turn off, press to switch to  
active standby; or, press and hold  
to switch to Eco standby.  
Exit Demo mode.  
Open or close the disc  
compartment.  
2.  
3.  
Mute/ unmute sound.  
- VOLUME +  
Increase/decrease volume.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear view  
a
l
k
b
c
d
e
j
i
h
f
g
1.  
2.  
~ AC IN  
for AC power cord  
AUX IN L / R  
Audio input sockets for a portable  
media player to play through the  
speakers on MCi8080  
7.  
VIDEO OUT  
Video output socket for the disc  
play  
for the supplied composite video  
cable that connects the disc player  
and a standard TV  
8.  
HDMI  
3.  
4.  
DVD CABLE IN  
Video output socket for the disc  
play  
Socket for connection of the main  
unit to the CD/DVD unit  
LAN  
Socket for the Ethernet cable that  
connects MCi8080 with the home  
Wi-Fi/wired network, if you want a  
wired connection to the home Wi-  
Fi/wired network  
for the HDMI cable (not supplied)  
that connects the disc player and a  
high-definition TV (HDTV)  
DOCK CABLE IN  
Socket for connection of an iPod/  
iPhone dock (not supplied)  
FM TUNER  
9.  
10.  
5.  
6.  
Socket for connection of the  
supplied FM antenna  
USB port for the hard disk drive  
DVD CABLE OUT  
Socket for connection of the CD/  
DVD unit to the main unit  
11.  
12.  
3.5 mm headphone jack  
LOUDSPEAKERS  
Sockets for connection cables that  
connect the supplied speakers  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
Remote control  
Press to turn on the unit;  
To turn off, press to switch to active  
standby; or, press and hold to switch  
to Eco standby.  
Exit Demo mode.  
SETTINGS  
a
b
c
2.  
3.  
Enter the settings menus.  
Source selector  
Select a media source:  
d
e
w
INTERNET RADIO: Radio services  
provided over the Internet;  
LIBRARY: Media library on a UPnP  
media server;  
AUX: Connected external audio  
device (e.g. an MP3 player or other  
portable music players);  
ONLINE SERVICES: Supported music  
services provided over the Internet  
(available in some countries only);  
DOCKING: Supported media on the  
connected iPod/iPhone;  
FM RADIO: FM radio stations, with  
RDS (Radio Data System) supported;  
USB: Media library on the hard disk  
drive connected to the unit;  
DISC: DVDs, DivX/WMA/ MP3/  
WMA files on discs, and audio CDs.  
FAVORITE  
f
g
v
u
h
i
t
s
r
q
j
k
l
m
n
4.  
5.  
In LIBRARY mode:  
Add songs to the list of favorites.  
In INTERNET RADIO mode:  
Add current station to the list of  
Favorite Stations.  
p
o
/ / /  
Navigation buttons  
Press to navigate through menus.  
/
In LIBRARY/INTERNET RADIO/USB  
mode:  
Superscroll: In a long list of options,  
press and hold to start Superscroll.  
Release to jump to the first item  
starting with current alphabet/  
number.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In DISC mode:  
Quickjump: In a long list of options  
that are sorted in an alphabetical  
order, press once or repeatedly to  
select an alphabet, and jump to the  
first item that starts with the selected  
alphabet.  
Select an album (for MP3/WMA  
CDs).  
/
In FM RADIO mode:  
Press and hold to start the auto  
tuning to the next available station;  
Press repeatedly for fine tuning.  
OK  
10.  
11.  
12.  
CLEAR  
Press to delete the previous entry;  
Press and hold to delete all entries.  
SUBTITLE  
In DISC mode: Select a subtitle language  
(for DVD and DivX discs only).  
AUDIO  
Confirm selection.  
6.  
7.  
HOME: Return to Home screen (main  
menu).  
In DISC mode:  
Select stereo, mono-left, mono-right,  
or mix-mono channel (for VCD discs  
only);  
Select an audio language (for DVD  
and DivX discs only).  
BACK: Go back to previous screen.  
/
In LIBRARY/USB/DISC mode:  
Press to skip to the previous/ next  
chapter/track;  
13.  
REPEAT A-B  
In DISC mode: Repeat a specific  
section within a track/disc.  
SOUND  
Select sound settings.  
PLAY MODE  
Select repeat play or random play.  
DISC MENU  
In DISC mode:  
Enter or exit the disc menu.  
ZOOM  
In DISC mode: Zoom in/out (for  
video discs and picture files on CDs).  
ANGLE  
Start/pause/resume play;  
In LIBRARY/USB mode: Start to play  
the entire file folder (SuperPlay™).  
14.  
15.  
16.  
Stop play;  
RATE  
In ONLINE SERVICES mode:  
Increase/decrease rating* of current  
music.  
Alphanumeric  
buttons  
For text entry  
In INTERNET RADIO/FM RADIO  
mode:  
On the radio play screen, press  
and hold a numeric button to store  
current station in the location as a  
preset station.  
8.  
9.  
17.  
18.  
In DISC mode: Select a camera angle  
(for video discs and picture files on  
CDs).  
19.  
20.  
a/A  
Press to switch between lower and  
upper cases;  
In FM RADIO mode, press in the  
list of presets to start editing station  
name.  
In LIBRARY/INTERNET RADIO/USB  
mode:  
VOL  
Increase/decrease the volume.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21.  
22.  
23.  
NOW PLAYING  
Return to play screen.  
Home screen  
Mute/unmute sound.  
SEARCH  
Press to start the search/browsing by  
alphanumeric entry.  
Note  
* Rating current music is available only for  
music services that support rating, and is  
available only in some countries.  
Touch screen  
MCi8080 is equipped with a touch screen.  
On MCi8080, you enter Home screen after  
the first-time setup is complete.  
To select a music source, or enter the  
[Settings] menu  
If necessary, tap on the screen to  
show functional buttons;  
Tap on the buttons to select  
corresponding functions;  
Tap on an option to select.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Home screen, tap on / to navigate  
through icons. Tap on the corresponding  
icon to select.  
To navigate through menus during music play,  
do the following:  
Or, press / /OK on the remote control  
to select the desired source.  
1 On the remote control, press  
and  
To go back to previous screen  
Press BACK.  
To return to Home screen  
Press HOME.  
then, use the Navigation buttons.  
2 To return to Play screen, press NOW  
PLAYING.  
Tip  
On Play screen, you can also press  
repeatedly to select songs.  
and  
Text entry  
To enter text and symbols, you can:  
tap on the text box and enter text  
and symbols with the pop-up keypad  
directly  
press corresponding alphanumeric  
buttons on the remote control  
Play screen  
Text entry with the remote control  
In LIBRARY/INTERNET RADIO/ONLINE  
SERVICES mode, Play screen appears when  
play starts.  
To enter letters/numbers/symbols  
corresponding to the same alphanumeric  
button, briefly and repeatedly press the  
button.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tip  
For languages other than English, letters that  
an alphanumeric button corresponds to may  
vary.  
To enter symbols, press  
To enter space, press  
repeatedly.  
.
To switch between lower and upper  
cases, press  
.
To delete previous character, press  
To delete all entries, press and hold  
.
.
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copy media files to the HDD  
3 Prepare  
Connect the HDD to a  
computer  
D:\MCi8080  
The supplied hard disk drive (HDD) contains  
the PC/Mac software for MCi8080 (Media  
Browser/TwonkyMedia Server), video tutorial,  
User Manual, and other information about  
MCi8080 that may be helpful to you.  
Transfer music/picture files from the computer  
to HDD. You can play music and photos on  
MCi8080.  
Connect the supplied HDD to a  
computer.  
» Wait till the HDD is detected on  
the computer.  
1 On the computer, under [My Computer]  
or [Computer],  
Find the HDD of MCi8080;  
Find the desired music folder.  
Copy MCi8080 files to the computer  
1 On the computer, under [My Computer]  
or [Computer],  
2 From the music/photo folder on your  
computer, drag and drop music/picture  
files to the HDD.  
Find the HDD of MCi8080;  
Find a location on the computer to  
store the MCi8080 files from the  
HDD.  
Tip  
Copy media files to the HDD, regardless of  
the folder structure.  
The music/picture file transfer may take you  
some time. You may proceed to next steps  
when transferring music/picture files to the  
HDD.  
2 Drag and drop the “MCI8080” folder  
from the HDD to the desired location on  
the computer.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Install batteries into the  
remote control  
Caution  
Risk of explosion! Keep batteries away from  
heat, sunshine or fire. Never discard batteries  
in fire.  
Risk of decreased battery life! Never mix  
different brands or types of batteries.  
Risk of product damage! When the remote  
control is not used for long periods, remove  
the batteries.  
1 Open the battery compartment.  
2 Insert two AAA LR03 batteries with  
correct polarity (+/-) as indicated.  
3 Close the battery compartment.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Place the unit  
TV  
Wireless Modem PC Power  
Internet  
MCi8080  
Place MCi8080 near a TV to use the disc  
Note  
player.  
For good Wi-Fi reception, place the unit  
within the coverage of the router/ Access  
point (not supplied).  
Never place this unit in an enclosed cabinet.  
Install this unit near the AC outlet where the  
AC power plug can be easily reached.  
To avoid magnetic interference or  
unwanted noise, never place this  
apparatus and speakers too close to any  
radiation devices.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Place the speakers  
2-3M  
To keep the tweeters unobstructed,  
never place the speakers in between  
shelves.  
For the best listening experience:  
Place the speakers with the tweeters  
at the ear height, and at least 50 cm  
away from the rear wall.  
Tip  
Place the speakers on speaker stands  
to get the best result.  
Place the speakers 2 to 3 meters  
away from each other, with the two  
speakers and your preferred listening  
position forming an equilateral  
triangle.  
Alternatively, you can place the speakers on  
the floor or on top of shelves, though not  
preferable.  
By placing the speakers at least 50 cm away  
from the rear wall, you can make the bass  
tighter and improve your listening experience.  
Place the speakers with the tweeters  
facing your preferred listening area.  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For the main unit side:  
5 Connect  
1 Hold down the socket flap.  
2 Insert the stripped part of the wire  
completely.  
Connect the main unit and  
CD/DVD unit  
Insert the right speaker wires to “R”,  
left speaker wires to “L”.  
As shown, plug the cable into DVD  
CABLE IN.  
Insert the red wires to “+”, black  
wires to “-”.  
3 Release the socket flap.  
a
b
c
For the speaker side:  
4 Unscrew the speaker connectors.  
5 For the left speaker, identify the speaker  
cable that is connected to the left  
connectors on the main unit.  
6 Insert fully the red end of the speaker  
cable into the red (+) connector.  
Connect speakers  
7 Screw the red (+) connector to secure  
the cable.  
Note  
8 Insert fully the silver end of the speaker  
Ensure that the colors of the speaker wires and  
terminals are matched.  
cable into the black (-) connector.  
9 Screw the black (-) connector to secure  
For optimal sound, use the supplied speakers  
only.  
the cable.  
Connect only speakers with impedance that is  
the same or higher than the supplied speakers.  
Refer to the Specifications section of this manual.  
10 Repeat steps 2-6 for the right speaker.  
a
b
c
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV  
Connect for disc play  
For disc play, make audio/video connections.  
Connect aTV  
On MCi8080, you can connect a TV through  
one of the two video jacks.  
Select the video jack that your TV supports:  
HDMI IN  
Composite video (CVBS): for a  
standard TV;  
HDMI jack: for a high-definition  
TV compliant with HDMI (High  
Definition Multimedia Interface)/DVI  
(Digital Visual Interface), and HDCP  
(High-bandwidth Digital Contents  
Protection).  
As shown, connect an HDMI cable (not  
supplied) to:  
Using the CVBS jack  
the HDMI socket on this unit, and  
the HDMI input socket on the TV.  
TV  
For TV/ monitor with a DVI jack only, use  
a DVI-to-HDMI adapter.  
Tip  
As a compact audio/video interface, HDMI  
transmits uncompressed digital data. With the  
HDMI connection, high-definition video/audio  
contents can present optimum video and  
audio quality on a HDTV.  
As shown, plug the supplied composite  
video cable into the corresponding  
sockets.  
Using the HDMI jack (sold separately)  
Use the HDMI jack to connect a high-  
definition TV (HDTV), which is equipped with  
HDMI (High Definition Multimedia Interface)  
or DVI (Digital Visual Interface), and compliant  
with HDCP (High-bandwidth Digital Contents  
Protection).  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Or, to play from a portable media player  
with 3.5mm headphone jack  
Connect a headphone to RCA cable (not  
supplied) to:  
Connect the FM antenna  
the AUX IN L / R sockets on this  
unit, and  
the 3.5mm headphone jack on the  
portable media player.  
Note  
Always plug in the FM antenna before tuning  
to an FM radio station.  
Connect the supplied FM T-type antenna  
to the FM TUNER socket on the unit;  
Stretch the antenna to its full length, and  
fix it on the wall.  
Connect external audio  
devices  
You can listen to an external audio device  
through the speakers on MCi8080.To do so, do  
the following connections, and then, select the  
AUX mode on MCi8080.  
Connect audio cables (red/white - not  
supplied) to:  
the AUX IN L / R sockets on this  
unit, and  
the audio output sockets on the  
external audio device.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect an iPod / iPhone  
dock  
Turn on/off  
Connect power supply  
Warning  
Risk of product damage! Ensure that the  
power supply voltage corresponds to the  
voltage printed on the back or the underside  
of the product.  
DOCK for iPod  
Connect MCi8080 to the power supply.  
Note  
With the connected iPod / iPhone dock, you  
can charge or listen to music from your iPod /  
iPhone through this unit.  
The type plate information is located at the  
back or at the underside of the product.  
Connect a dock (not supplied) to the  
DOCK CABLE IN socket on this unit.  
Turn on/off  
Tip  
1 Press or a source selector to turn on  
the unit.  
To listen to music from the docked iPod /  
iPhone, first press DOCKING to select the  
dock source.  
2 To turn off the unit,  
Press to switch to active standby;  
Or, press and hold to switch to  
Eco standby (energy-saving mode).  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Active standby  
When in active standby, some major functions  
of MCi8080 remain in the normal state of  
power consumption, e.g. Wi-Fi connection,  
clock display. Thus, MCi8080 can quickly go to  
the running state when you switch MCi8080  
from active standby to on.  
In active standby,  
The power indicator lights up red;  
Clock time is displayed if you have set  
clock.  
And, the unit is still connected to the Wi-Fi/  
wired network.  
Auto active standby  
If no activity happens on MCi8080 for 20  
minutes, MCi8080 can switch to active  
standby automatically.  
Eco standby  
Eco standby is an energy-saving mode. In Eco  
standby, all major functions are switched to a  
low-power state or off, e.g. micro-processor,  
Wi-Fi connection, display, and hard disk.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 First-time setup  
The first time you turn on MCi8080,  
1 Select the desired language on the screen  
as prompted.  
2 To learn major functions on MCi8080,  
Select [Yes, show me the demo],  
when asked whether to view demo;  
If necessary, press VOL to adjust  
the volume;  
To exit the demo play, press  
» The unit is switched to Eco  
standby.  
.
» Press again to turn on MCi8080,  
and restart the setup.  
To proceed to network setup,  
Select [No], when asked whether to  
view demo.  
3 Select your location and time zone from  
the list as prompted.  
4 Select [Yes], when asked whether to set  
up network connection.  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect to homeWi-Fi/  
wired network  
Connect wirelessly  
MCi8080  
MCi8080  
Connect through an Ethernet cable  
To have the unit connected to the  
Internet over home Wi-Fi/wired network,  
ensure that the router connects to  
the Internet directly and no dial-up is  
required on the computer.  
To switch between different connection  
methods (wireless or wired, automatic  
or manual), or switch between different  
routers, go to [Settings] > [Network  
settings] > [Setup network].  
You can connect MCi8080 to home Wi-Fi/  
wired network in different ways: wireless or  
wired, automatic or manual.  
Use a router (or Access Point) for home  
Wi-Fi/wired network. That is, connect  
computers/devices to a router.  
Connect MCi8080 to the router  
wirelessly or through an Ethernet cable.  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless connection: One-touchWi-  
Fi Protected Setup (WPS)  
MCi8080 supports Wi-Fi Protected  
Setup(WPS). You can quickly and securely  
connect MCi8080 to a wireless router that  
also supports the WPS.  
You can select one of the two setup methods:  
PBC (Push Button Configuration), or PIN  
(Personal Identification Number).  
Tip  
Wi-Fi Protected Setup(WPS) is a standard  
created by Wi-Fi Alliance for easy establishment  
of secure wireless home network.  
Turn on WPS-PBC on MCi8080  
Tip  
1 Select [Yes], when asked whether to set  
up network connection (see ‘First-time  
setup’).  
To use PIN (Personal Identification Number)  
as the setup method: On MCi8080, select  
[Wireless (WiFi)] > [Pin entry (WPS – PIN)],  
and write down the PIN that is displayed on  
MCi8080; On the router, enter the PIN.  
2 Select [Wireless (WiFi)] > [Push button  
(WPS – PBC)].  
Consult the user manual of the router to learn  
how to enter the PIN the router.  
2/3  
Connect to the Internet  
Connect to the Internet as prompted.  
» You enter Home screen after the first-  
time setup is complete.  
Look for network  
Push button (WPS...  
Pin entry (WPS - PIN)  
MCi8080  
Add MCi8080 on the router  
Consult the user manual of the router to  
learn how to add a WPS device to the  
router. For example:  
press and hold the WPS push button.  
» The router starts to search for a WPS  
device.  
Internet  
» On MCi8080, a message appears  
when the connection is completed  
successfully.  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
1/4  
Ensure that the router connects to the  
Internet directly and no dial-up is required on  
the computer.  
Network A  
Network B  
Network C  
Other...  
Wireless connection: Enter  
encryption key manually  
3 Select the desired Wi-Fi network.  
MCi8080  
4 As prompted, enter the encryption key to  
the network.  
Tip  
» The unit starts to acquire an IP  
address assigned by the Wi-Fi network  
automatically.  
Before you start the network setup, have the  
encryption key to your router ready.  
» A message appears when the  
connection is completed successfully.  
1 Select [Yes], when asked whether to set  
up network connection (see ‘First-time  
setup’).  
2 Select [Wireless (WiFi)] > [Look for  
network].  
» The unit starts to search for wireless  
networks.  
» A list of available Wi-Fi networks  
appears.  
1/3  
Look for network  
Push button (WPS...  
Pin entry (WPS - PIN)  
Successfully  
connected to  
Network A  
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tip  
If you have hidden the SSID of the router (e.g.  
disable the SSID broadcasting), go to the end  
of the list of Wi-Fi network. Select [Other...]  
> [Manual SSID entry]. In the text box, enter  
the name of the router.  
Note  
The router may fail to assign an IP address,  
if the DHCP (Dynamic Host Configuration  
Protocol) is unavailable or disabled on the  
router. You may need to enter the IP address  
manually, or press BACK to start re-connecting.  
Get the IP address of the router  
Consult the user manual of the router.  
Or, to check for the settings of the router,  
enter the IP address (e.g. 192.168.1.1) in  
the web browser (e.g. Internet Explorer)  
of the computer, and then, get the  
Wireless connection: Enter IP address  
manually  
desired information in the setup page.  
Enter the IP address manually  
On the MCi8080, enter an IP address  
that allows the unit to be in the same  
subnet as the router.  
MCi8080  
For example, if the router has  
IP address: 192.168.1.1, Subnet mask:  
255.255.255.000;  
Stop getting Auto IP  
1 Search for the home Wi-Fi network,  
and then, connect to the home Wi-Fi  
network.  
Then, enter the following on the unit:  
IP address: 192.168.1.XX (where XX  
denotes a number), Subnet mask:  
255.255.255.000.  
» The unit starts to acquire an IP  
address assigned by the Wi-Fi network  
automatically.  
2 Press BACK on the remote control to  
stop getting auto IP.  
Acquiring IP address...  
Press <Back> to enter  
IP address manually  
Press / repeatedly to select the entry  
location;  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To enter the desired digits, use the  
alphanumeric buttons on the remote  
» A message appears when the  
connection is completed successfully.  
control; or press  
/
repeatedly.  
2/2  
Note  
Ensure that you never enter an IP address that  
is already assigned to a computer/device on  
the network.  
Wireless (W  
iFi)  
Wired (Ethernet)  
Wired connection  
MCi8080  
Tip  
Connect to the router by using the Ethernet  
cable  
The router may fail to assign an IP address,  
if the DHCP (Dynamic Host Configuration  
Protocol) is unavailable or disabled on the  
router. You may need to enter the IP address  
manually, or press BACK to start re-  
connecting.  
1 Select [Yes], when asked whether to set  
up network connection (see ‘First-time  
setup’).  
2 Use an Ethernet cable to connect the unit  
Connect to the Internet  
to the router.  
Connect to the Internet as prompted.  
» You enter Home screen after the first-  
time setup is complete.  
MCi8080  
12V=1A  
To  
Modem  
LAN4  
LAN3  
LAN2  
LAN1  
Reset  
Internet  
Connect to the home Wi-Fi/wired network  
Note  
On the unit, select [Wired (Ethernet)].  
» The unit starts to acquire an IP address  
assigned by the network automatically.  
Ensure that the router connects to the  
Internet directly and no dial-up is required on  
the computer.  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get the IP address of the router  
Wired connection: Enter IP address  
manually  
Consult the user manual of the router.  
Or, to check for the settings of the router,  
enter the IP address (e.g. 192.168.1.1) in  
the web browser (e.g. Internet Explorer)  
of the computer, and then, get the  
desired information in the setup page.  
MCi8080  
Assign the IP address manually  
On the MCi8080, enter an IP address  
that allows the unit to be in the same  
subnet as the router.  
For example, if the router has  
IP address: 192.168.1.1, Subnet mask:  
255.255.255.000;  
Then, enter the following on the unit:  
IP address: 192.168.1.XX (where XX  
denotes a number), Subnet mask:  
255.255.255.000.  
Stop getting Auto IP  
1 Use an Ethernet cable to connect the unit  
to the router.  
2 On the unit, select [Wired (Ethernet)].  
3 Press BACK on the remote control to  
stop getting auto IP.  
Acquiring IP address...  
Press <Back> to enter  
IP address manually  
Press / repeatedly to select the entry  
location;  
To enter the desired digits, use the  
alphanumeric buttons on the remote  
control; or press  
/
repeatedly.  
Note  
Ensure that you never enter an IP address that  
is already assigned to a computer/device on  
the network.  
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Play from home  
Wi-Fi/wired  
network  
Play from the hard disk drive  
(HDD)  
Connect the HDD to MCi8080  
After you have transferred music/picture files  
from the computer to HDD CA - COMMON  
TOPIC - PREPARE - HEADER - Prepare (see  
‘Prepare’ on page 17),  
Tip  
1 Install the supplied software on the  
computer: Media Browser for PC,  
TwonkyMedia Server for Mac.  
With the software installed, the computer can  
work as a music server. You can stream music/  
pictures from the computer to MCi8080, if  
both of them are connected to the home Wi-  
Fi/wired network.  
On the computer, find the  
“MCI8080 folder” you copied from  
the HDD;  
Run the setup file under  
TwonkyMedia folder to start  
installation on the computer.  
Library on the HDD  
You can transfer the music/ picture files from  
a computer to the HDD in two ways:  
2 Ensure that you have removed the HDD  
safely from the computer.  
by using a USB cable that connects  
the HDD to the computer;  
3 Connect the HDD to MCi8080.  
or, through the home Wi-Fi/wired  
network.  
Transfer through the home Wi-Fi/wired  
network  
Through the network, you can conveniently  
transfer a smaller number of songs/pictures  
from the computer to HDD, without  
removing the HDD from MCi8080.  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Ensure that the computer is connected to  
the home Wi-Fi/wired network.  
On MCi8080, ensure that  
The HDD is properly connected;  
1/2  
Music  
Pictures  
On [My Computer], select [Tools] >  
[Map Network Drive];  
Click to assign a network drive to  
the HDD (e.g. X: as shown). As  
shown, type in the HDD name \\  
Philipsmci8080\usb. Click [Finish].  
In [Settings] > [Network settings],  
[USB sharing]” is turned on.  
For computers running Windows  
XP Professional:  
2 The first time you connect the HDD as  
a network drive, assign a network drive  
to the HDD on the computer.  
On the computer running Windows  
XP, double click [My Computer];  
On the computer running Windows  
Vista, double click [Computer].  
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 On [My Computer] (Windows XP), or  
Tip  
[Computer] (Windows Vista),  
In the case of a large number of media files,  
network performance may affect the transfer  
speed, or even cause the interruption of  
transfer.  
Philipsmci8080 is the default device name. To  
change the device name, go to [Settings] >  
[Device ID and information].  
Find the HDD under [Network  
Drives];  
Find the music/photos folder on the  
computer.  
For computers running Mac OS X:  
As shown, select [Go] > [Network];  
Under [SHARED], select [All] >  
[philips-network];  
Organize files on the HDD  
Audio files:  
If the files contain file information (meta  
tag or ID3 tag), the files can be sorted  
automatically by the file information, like  
Artist, Album, Genre, and others.  
On [philips-network], select  
[philipsmci8080], and then [usb].  
Launch media management software to  
check or edit the file information. For  
example, click as shown in Windows  
Media Player 11. Select the desired song,  
and then, double click it to edit.  
9080  
If necessary, you can also organize audio  
files in different folders as desired.  
Find the music/photos folder on the  
computer.  
Picture files:  
Organize files in different folders as desired.  
The folders are sorted in an alphabetical  
order.  
4 Drag and drop music/picture files from  
the music/photos folder to MCi8080.  
» On MCi8080,You can switched to the  
music/photo collection on the [HDD]  
source (Press HDD on the remote  
control).  
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Play from the HDD  
1 On MCi8080, ensure that the HDD is  
properly connected.  
2 On the remote control, press USB.  
» The file sorting process may take some  
time. During file sorting, the file folders  
are displayed.  
» Audio files are displayed under  
different categories (e.g.Artist,Album,  
Genre), if meta/ID3 tags are edited for  
the files.  
» Picture files are also organized.  
3 Select your desired track or album.  
4 Press  
to start play.  
Play starts from the beginning of the  
album, if you press on an album.  
Play screen appears when play starts  
(see ‘Your MCi8080’->’Overview’->  
‘Play screen’).  
5 To stop play, press  
.
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multiroom music  
NP3700  
MCi8080  
With the Multiroom Music feature, you can  
play the same song on MCi8080 and a Philips  
network music player (NP3700) at the same  
time.  
3 Wait until the Multiroom Music feature is  
enabled successfully.  
To cancel simultaneous play, press on  
MCi8080.  
Before you enable this feature, make sure that:  
both MCi8080 and NP3700 are  
connected to the home Wi-Fi  
network;  
you are playing songs from the HDD  
connected to MCi8080;  
Starting Multiroom Music.  
Press <STOP> to cancel  
Multiroom Music.  
1 Play a song from the HDD (see ‘Play from  
home Wi-Fi/wired network’->’Play from  
the hard disk drive (HDD)->’Play from  
the HDD’).  
2 From Home screen, select [Multiroom  
Music] to enable the Multiroom Music  
feature.  
Multiroom Music  
EN 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stream from a UPnP server  
MCi8080  
Wireless Modem PC Power  
You can stream music/photos between  
MCi8080 can also be the UPnP media server  
of such computers and other UPnP devices  
that are connected to the home Wi-Fi network,  
if MCi8080 is turned on or switched to active  
standby.  
Connect a hard disk drive (HDD)* to MCi8080.  
Music and pictures on the HDD can be played  
on such computers and UPnP devices.  
computers and MCi8080, when  
MCi8080 is connected to home Wi-Fi/  
wired network;  
Music sharing is set up on the computers,  
other UPnP servers that are also  
connected to the home Wi-Fi/wired  
network.  
With the music sharing software (the supplied  
Media Browser and TwonkyMedia Server),  
such computers can work as UPnP media  
servers (music/photo libraries) of MCi8080, if  
they are turned on.  
Tip  
*The Hard disk drive (HDD) can have a  
maximum capacity of 160 GB, or up to 40,000  
media files.  
Through the UPnP (Universal Plug and Play)  
protocols, a UPnP media server allows music  
or picture files to be streamed from the server  
to a UPnP client device (e.g. MCi8080). On the  
UPnP client device, you can play the music and  
pictures from the server.  
38 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Library on a UPnP server  
On the computers (UPnP servers), the  
supplied software Media Browser or  
TwonkyMedia Server can access music  
libraries that are organized by different media  
management software, including Windows  
Media Player 11 and iTunes.  
iTunes is the a trademark of Apple Inc.,  
registered in the U.S. and other countries.  
Stream from a UPnP server  
6 To stop play, press  
.
On MCi8080, play music/picture libraries that  
are streamed from a UPnP server (a computer  
on the home Wi-Fi/wired network).  
Play favorite songs  
On MCi8080, you may wish to listen to  
certain songs from different artists, albums,  
and genres. Add the songs to [Favorites].  
1 Ensure that the UPnP server is connected  
to the home Wi-Fi/wired network.  
2 On MCi8080, press LIBRARY on the  
1 Go to a list of songs.  
remote control.  
2 On the remote control, press FAVORITE  
Or, from Home screen, select  
[Media Library].  
to add current song to [Favorites].  
Or, press FAVORITE when listening  
to a song.  
3 Select a music/pictures library.  
» You can see the categories by which  
the music/pictures are sorted (e.g.  
Artist,Album, Genre).  
A list of favorite songs is created  
under [Media Library] > [Favorites].  
3 To find and play the favorite songs, press  
HOMEon the remote control.  
» From home screen, you can find the  
favorite songs under [Media Library]>  
[Favorites].  
4 Select your desired track or album.  
5 Press  
to start play.  
Play starts from the beginning of the  
album, if you press on an album.  
Play screen appears when play starts  
(see ‘Your MCi8080’->’Overview’->  
‘Play screen’).  
To remove a favorite song from  
[Favorites]  
» Select the song in [Media Library] >  
[Favorites]. Press FAVORITE on the  
remote control.  
EN 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MCi8080  
Play photos  
Press  
/
to rotate the picture;  
Press / to move to previous/next  
picture;  
3 On the computer, you can click the  
Press  
to start playing all pictures in  
buttons to  
slideshow mode.  
Adjust the volume;  
Select previous/next songs if you  
have dragged more than one songs  
to MCi8080. See the Step 2 above.  
Fast search forward or backward;  
Play/pause and resume.  
4 On MCi8080, do the following to exit the  
external control.  
Press on the remote control;  
Press a source selector on the  
remote control;  
Press ;  
Press HOME.  
External control from a PC  
Through the home W-Fi/wired network, the  
Media Browser on a PC (UPnP server) allows  
you to control MCi8080.  
Note  
The external control is stopped if the sleeper  
timer is turned on after the set time duration.  
1 On the PC desktop, launch Media  
Browser by double clicking the icon.  
2 In Media Browser, select songs to be  
played on MCi8080. Drag the songs to  
the icon of MCi8080.  
» A green “+” appears if the songs are in  
supported formats.  
40 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Store preset stations  
Play Internet radio stations  
To play Internet radio stations, ensure that  
On MCi8080, you can store up to 10 preset  
stations. Each preset station corresponds to  
a numeric button on the remote control. On  
the radio play screen, press a numeric button,  
you quickly switch to the corresponding  
preset station.  
MCi8080 is connected to the Internet  
over the home Wi-Fi/wired network.  
Note  
By default, preset stations are pre-loaded to  
MCi8080 according to the location that you  
select during the first-time setup. To check  
or change the location, go to [Settings] >  
[Location and time zone].  
Ensure that the router connects to the  
Internet directly and no dial-up is required on  
the computer.  
MCi8080  
To store preset station  
1 Play the desired station (see ‘Play from home  
Wi-Fi/wired network’->’Play Internet radio  
stations’->’Tune to Internet radio stations’).  
2 On the play screen, press and hold the  
desired numeric button (0-9).  
» A message appears, indicating that the  
station is added to the corresponding  
location.  
» The new preset replaces the old one if  
Internet  
the location has been filled.  
Tune to Internet radio stations  
1 Ensure that MCi8080 is connected to the  
Internet.  
2 On MCi8080, press INTERNET RADIO  
on the remote control.  
Or, from Home screen, select  
[Internet Radio].  
3 To search for radio stations,  
Go to [All stations] > [Locations] to  
locate stations by region;  
To search for a station by name,  
use the remote control to start  
alphanumeric search or Superscroll  
(see ‘Play from home Wi-Fi/wired  
network’->’Search for music/  
pictures’).  
To play a preset station  
Go to [Internet Radio] > [Presets].  
Or, on the radio play screen, press  
the corresponding numeric button  
(0-9).  
4 Select the desired station to start play.  
EN 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit favorite stations  
On MCi8080, you can mark an Internet radio  
station as favorite. All the stations are added  
to [Internet Radio] > [Favorite stations]. In  
this way, you can quickly access your favorite  
stations.  
To add a station to [Favorite stations]  
On a list of stations, select the  
desired station. Press FAVORITE on  
the remote control.  
Or, play the desired station. On the  
play screen, press FAVORITE on the  
remote control.  
» A message appears, indicating that  
the station is added to [Favorite  
stations].  
To remove a station from [Favorite stations]  
Select the station in the list of  
stations; or, go to the play screen of  
the station. Press FAVORITE again.  
Or, press CLEAR on the play screen  
of the station.  
42 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manage Internet radio online  
MCi8080  
Internet  
http://www.philips.com/welcome  
By registering MCi8080 on www.philips.com/  
welcome (see ‘Register MCi8080 with Philips’),  
you can log in to Club Philips. On Club Philips,  
you can do the following to manage the  
Internet Radio on a computer:  
Edit favorite stations;  
Manually add stations that you are unable  
to find on MCi8080.  
Edit favorite stations online  
In [Browse], find the desired stations;  
Through Club Philips, you can manage the  
list of favorite stations on a computer. When  
connecting MCi8080 to the Internet, you  
update the favorite stations on MCi8080.  
1 On a computer, log in to Club Philips (see  
‘Register MCi8080 with Philips’).  
2 To mark/unmark stations as favorite:  
Click [Streamium management] >  
[Favorites] > [Browse];  
EN 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Under [Favorite], check the box  
corresponding to the station.  
Tip  
In the list of favorite stations, to put a favorite  
station ahead of the first one, make the station  
just behind the first one; drag and drop the  
first station downward.  
To put a station behind the last one, make the  
station just ahead of the last one; drag and  
drop the last station upward.  
» The station is marked as favorite.  
To unmark, uncheck the box  
corresponding to a station.  
Manually add stations online  
Manually add stations  
Through Club Philips, you can manually add  
Internet radio stations to MCi8080 on a computer.  
1 On a computer, log in to Club Philips (see  
‘Register MCi8080 with Philips’).  
2 To add a station, click [Streamium  
management] > [My media] > [Music].  
3 To change the order of favorite stations in  
the list:  
Click [Prioritize];  
Click on the row of the station to be  
moved;  
Drag and drop the row upward or  
downward.  
3 In [Music], enter station information in  
the text boxes:  
In [URL], fill in the web site of the  
station;  
In [Nickname], fill in a name that  
appears as station name in [My  
media];  
In [Description], fill in one-word  
description about the station, e.g.  
music, sports, new.  
The description is used as a category  
to sort stations under [My media].  
» On MCi8080, you can find the  
stations in the desired order  
under [Internet Radio] >  
[Favorite stations], if you have  
connected MCi8080 to the  
Internet.  
4 Click [Save].  
» A station is manually added the below  
the edit boxes.  
44 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To edit an added station  
Stream from Napster  
Note  
To stream from online music services, ensure  
that MCi8080 is connected to the Internet  
over the home Wi-Fi/wired network.  
Log in to your Napster account  
To access Napster online music service, you  
need to log in to your Napster account. Use  
your existing Napster account, or use the trial  
account before you create an account with  
Napster.  
1 On MCi8080, press ONLINE SERVICES  
on the remote control.  
From Home screen, go to [Online  
services] > [Napster].  
2 Log in to the existing account/trial  
account:  
As shown, click the station.  
Press or to select the entry  
location;  
Use the alphanumeric buttons to  
enter desired digits/letters;  
» The text boxes are filled, showing  
the information about the station.  
Click on the text boxes to edit the  
information.  
You can also press or  
repeatedly, or press and hold or  
until the desired digit/letter appears;  
Press OK to confirm.  
» Next time you select Napster,  
you see the account name/  
password that you previously  
entered.  
Stream from online music  
services  
On MCi8080, you can enjoy the online music  
services.  
With the online music services, you can access  
their online music libraries.  
Tip  
Create a user account to use the services.  
To access some features, you may need to  
subscribe services.  
You go to the screen of account management,  
if you fail to log in to the Napster account.  
As prompted, log in to the account again, or  
change to another account.  
Note  
Online services are available in some countries  
only.  
EN 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search for music  
Search for music/pictures  
In a list of options, you can do one of the  
following to search for what you need.  
1 On the Napster screen, select [Search] >  
[Song], [Album], or [Artist].  
» You can search for music by the name  
of a song, album, or artist.  
Tip  
2 Enter the name of the desired song,  
When doing searching in the following ways,  
ensure that MCi8080 is in the mode of [Media  
Library], [HDD], or [Internet Radio].  
album, or artist.  
Press or to select the entry  
location;  
Use the alphanumeric buttons to  
enter desired letters;  
You can also press or  
repeatedly, or press and hold or  
until the desired letter appears;  
Use the navigation keys  
,
, , .  
Start quick search by using the  
alphanumeric search, Superscroll, and  
Quickjump.  
Note  
Press OK to confirm.  
Alphanumeric search, Superscroll and  
Quickjump are available only when you enter  
a long sorted list of options (excluding the  
home screen and lists of menus).  
Or,  
1 On the Napster screen, select  
[Channels].  
2 Select a playlist by genre (e.g. jazz, blues).  
Alphanumeric search  
Or,  
On the Napster screen, select  
[Catalogue].  
» You can browse music as sorted  
and organized by the expert  
music service of Napster.  
In a long list of options, start alphanumeric  
search by entering characters that an item  
starts with or contains.  
1 Press SEARCH on the remote control, if  
necessary.  
Play music  
» A text box appears.  
To start play, press  
To stop play, press  
.
.
My Library  
All your played music is saved to [My Library].  
You can search for the music by song, channel,  
album, artist, and genre.  
2 Enter characters by using the remote  
control (see ‘Your MCi8080’-  
>’Overview’->’Text entry’).  
46 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Press OK after completing text entry.  
Superscroll  
» Search starts.  
In a long list of options, Superscroll allows you  
to start a search in an alphabetical order. You  
can quickly reach the first item that starts with  
the selected alphabet.  
» You can find a list of items that contain  
the characters.  
» You can find a close match if there is  
no item that contains the character.  
1 Press and hold  
/
to start Superscroll.  
» A pop-up text box appears. Letters are  
displayed repeatedly in an alphabetical  
order, starting from current letter.  
Quickjump  
You can also use Quickjump for alphanumeric  
search.  
To reach the first item that starts with a  
certain letter  
On the button corresponding to the  
letter, press once or repeatedly until  
the letter appears.  
2 Release  
/
when you reach the desired  
letter.  
» You reach the first item that starts with  
the letter.  
To reach the first item that starts with the  
next letter  
Press .  
To reach the first item that starts with the  
previous letter  
Press .  
EN 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 If necessary, press DISC on the remote  
8 Play music CD/  
movie DVDs  
control, and then press  
to start play.  
4 During disc play,  
Press  
/
repeatedly to select a  
track/chapter. For WMA/MP3 files  
on a CD-R/RW, or recordable DVD,  
Caution  
Never look at the laser beam inside the unit.  
press  
/
to select a file folder.  
Risk of product damage! Never play discs with  
accessories such as disc stabilizer rings or disc  
treatment sheets.  
Press and hold / to search  
forward/backward.  
Never put any objects other than discs into  
Press  
Press to stop.  
to pause or resume.  
the disc compartment.  
Note  
Ensure that you have made connections for  
disc play (see ‘Connect’->’Connect for disc  
play’).  
For the supported disc formats, see ‘Your  
MCi8080’->’Introduction’.  
Basic operations  
1 On MCi8080, press .  
» The disc tray opens.  
2 Load a disc onto the tray, the printed side  
On the CD play screen,  
Tap on the screen to show functional  
buttons;  
Select play options by tapping on  
corresponding buttons:  
facing up. Press .  
» Play starts automatically after disc  
reading is complete.  
/ : Tap to pause or play current song;  
: Tap to select previous/next song;  
/
: Tap to play all songs in current folder  
randomly;  
Printed side  
: Tap to play all songs in current folder  
repeatedly;  
: Tap to return to the previous screen.  
WI-FI COMPONENT HI-FI SYSTEM  
48 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the disc menu  
After loading a disc onto the tray, you can see  
the disc settings on theTV screen.  
Printed side  
TV  
Play movie discs(DVD/DivX/  
VCD)  
WI-FI COMPONENT HI-FI SYSTEM  
AV/TV  
Pause/Resume/Stop  
1 On MCi8080, load a disc onto the tray.  
To pause  
2 Turn on the TV and switch to the correct  
video-in channel in one of the following  
ways:  
During disc play, press  
to pause.  
» TheTV screen shows the scenes  
where you stop play.  
On the remote control of your TV,  
press the AV/TV button repeatedly  
until you see the Philips screen, or  
the video disc screen.  
Go to the lowest channel on your  
TV, then press the Channel Down  
button until you see the Philips  
screen, or the video disc screen.  
Or, during DVD play, press  
.
» TheTV screen shows the Philips  
screen.  
To resume  
Press  
.
» The disc play resumes from the  
last stop point.  
Press the source button repeatedly  
on the remote control of your TV.  
To stop  
Tip  
Press again.  
The video-in channel is between the lowest  
and highest channels and may be called  
FRONT, A/V IN, VIDEO etc. See the TV user  
manual on how to select the correct input on  
the TV.  
Access the disc menu  
To access or exit the menu manually  
In the DISC mode, press DISC  
MENU or SETTINGS on the remote  
control.  
EN 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search  
Fast search forward/backward  
1 During play, press and hold / to select  
a search speed.  
To resume play at normal speed,  
press  
.
Search by time or chapter/track  
1 During disc play, press SEARCH until a  
time field or chapter/track field is displayed.  
For the time field, enter the play  
position in hours, minutes and seconds.  
Program favorite chapters/  
tracks  
You can play certain chapters/tracks on a disc.  
Program the chapters/tracks as desired on the  
TV screen.  
For the chapter/track field, enter the  
chapter/track.  
» Play starts automatically at your  
selected point.  
Select languages for disc play  
Select an audio language  
You can select an audio language on DVDs or  
DivX discs.  
Printed side  
TV  
1 During disc play, press AUDIO.  
» The language options appear. If the  
selected audio channels is unavailable,  
the default disc audio channel is used.  
WI-FI COMPONENT HI-FI SYSTEM  
1 In the DISC mode, ensure that the disc  
Note  
play stops.  
For some DVDs, the language can only be  
changed from the disc menu.  
2 Press FAVORITE on the remote control.  
» On theTV screen, you can see a menu  
for you to program desired chapters/  
tracks.  
Select a subtitle language  
You can select a subtitle language on DVDs.  
3 Use the remote control to enter the  
desired chapters/tracks.  
During disc play, press SUBTITLE.  
4 Press FAVORITE to exit.  
Note  
To play the program  
For some DVDs, the language can only be  
changed from the disc menu.  
Press  
.
To erase the program  
Press twice;  
Or, remove the disc from the disc  
tray.  
50 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select play options  
Select Repeat/Shuffle options  
During disc play, you can repeatedly play a  
chapter/track, or a file or files in a folder. You  
can also play tracks or files in a folder in a  
random order.  
To turn on or off the repeat/shuffle options  
Press PLAY MODE on the remote  
control.  
To repeatedly play a section in a disc  
1 During music or video play, press  
REPEAT A-B at the start point.  
2 Press REPEAT A-B at the end point.  
» The selected section starts to play  
repeatedly.  
» To cancel repeat play, press REPEAT  
A-B again.  
Note  
The section A and B can be set only within the  
same track/title.  
Zoom in/out image  
1 During video/picture play, press ZOOM  
repeatedly to zoom in/out the image.  
When the image is zoomed in, you  
can press / / / to pan through  
the image.  
Change a camera angle  
Some DVDs contain alternate scenes, such as  
scenes recorded from different camera angles.  
For such DVDs, you can select from the  
available alternate scenes.  
1 During DVD play, press ANGLE repeatedly  
to switch between camera angles.  
EN 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When listening to a radio station, you can  
store current station to a desired location  
(0-9) in the preset list. The numeric buttons  
(0-9) on the remote control correspond to  
the locations (0-9) in the preset list.  
9 Play FM radio  
Tune to FM radio stations  
1 Tune to your desired station.  
Note  
2 On the radio play screen, press and hold  
a numeric button.  
Before you tune to FM radio stations, make  
sure that you have properly installed the  
supplied FM antenna (see ‘Connect’->’Connect  
the FM antenna’).  
If necessary, press NOW PLAYING  
to return to the radio play screen.  
Current station is stored to the  
location.  
Edit station information  
Autostore  
1 On MCi8080, press FM RADIO on the  
1 In the FM RADIO mode, go to [Presets].  
remote control.  
On the radio play screen, press  
FAVORITE .  
Or, from Home screen, select [FM  
radio].  
2 In the list of preset stations,  
2 In [FM radio], select [Auto store].  
» MCi8080 starts to search for available  
stations automatically.  
Select the station to be edited;  
Press a/A to start editing;  
Press / to select the entry  
» Radio play starts and a maximum of 60  
stations are stored as presets when the  
auto tune is complete.  
location; press  
/
repeatedly to  
select desired letters.  
» The preset stations are listed in the  
order of reception strength, with the  
RDS stations at the top.  
3 Press OK to confirm. Press BACK to  
discard the changes.  
3 To select a preset station, go to [Presets].  
Listen to FM radio  
Or, press FAVORITE during radio  
1 On MCi8080, press FM RADIO on the  
play.  
remote control.  
Or, from Home screen, select [FM  
Manual tuning  
radio].  
1 In [FM radio], select [Manual tuning].  
2 Tune to your desired station (see ‘Play FM  
2 Press and hold / to start auto tuning.  
» You tune to the next available station  
with sufficient reception.  
Radio’->’Tune to FM radio stations’).  
To select a preset station:  
Go to [FM radio] > [Presets];  
Or, press the corresponding numeric  
button on the radio play screen (for  
the first 10 preset stations only).  
3 Press / repeatedly for fine tuning.  
Edit preset stations  
3 To mute/unmute the radio play  
Store current station to a location  
Press  
.
52 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS (Radio Data System)  
RDS (Radio Data System) is a service  
that allows FM stations to show additional  
information.  
During Autostore, RDS stations are  
automatically stored at the top of the list of  
preset stations.  
When tuning to an RDS station, you can see  
the following information on the screen:  
Station name;  
Program type, such as news, sports,  
and pop music;  
Frequency;  
Scrolling text (RDS text), if available.  
Use the RDS for clock setting  
Note  
When you use an RDS station for clock  
setting, ensure that the RDS station broadcasts  
time signals.  
1 From Home screen, select [Settings] >  
[Clock settings] > [Date and time].  
To enter [Settings], you can also  
press SETTINGSon the remote  
control.  
2 In [Date and time], select [Current date  
and time] > [Automatic (RDS)].  
» The unit searches for the first preset  
station automatically.  
» The time is set according to time  
signals from the station.  
3 To use another RDS station for clock  
setting, tune to the RDS station  
immediately.  
Tip  
To use an RDS station for regular clock setting,  
store the station as the first preset station.  
EN 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Play from an  
external audio  
device (AUX)  
With the AUX IN L / R socket and AUX  
mode, MCi8080 allows you to play an external  
audio device (e.g. a portable media player)  
through the speakers of MCi8080.  
Play from an external audio  
device  
1 Ensure that the external audio device  
is properly connected to MCi8080 (see  
‘Connect’->’Connect external audio  
devices’).  
2 On MCi8080, select the AUX mode.  
From Home screen, select [AUX].  
Or, press AUX on the remote  
control.  
3 On the external audio device, start music  
play.  
For the music play, you can use the  
sound settings on MCi8080 (see  
‘Settings’->’Sound settings’).  
54 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 From Home screen, go to [Settings] >  
11 Settings  
[Sound settings] > [Bass / Treble].  
Or, press SOUND on the remote  
control to enter the menu of sound  
settings.  
Play modes  
When playing music, you can choose to play  
repeatedly, play in random order, or play one by  
one. Select a play mode as desired.  
2 Press / repeatedly to increase/decrease  
the level.  
Press CLEAR to select neutral level.  
To select a play mode for music play  
Before or during music play,  
Full sound  
[FullSound] restores the sonic details that  
music compression loses (e.g. MP3, WMA).  
From Home screen, go to [Settings]  
> [Play mode]; Or,  
Press PLAY MODE on the remote  
Turn on or off [FullSound] in [Settings]  
control.  
>[Sound settings].  
»
- Play all songs in current folder  
repeatedly;  
Direct Source  
»
»
- Play current song repeatedly;  
- Play all songs in current  
folder randomly.  
With [Direct source], you can turn off  
the settings of sound effects on MCi8080,  
including [FullSound] and [Bass / Treble].  
Thus, music plays in an original way, without  
the sound effects from MCi8080.  
Sound settings  
On MCi8080, you can select different sound  
settings in [Settings] > [Sound settings].  
Turn on or off [Direct source] in  
[Settings] > [Sound settings].  
Tip  
1 From Home screen, go to [Settings] >  
[Sound settings].  
When [Direct source] is on, you can still  
adjust the volume and [Balance].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
The sound effect settings are retained and  
enabled when [Direct source] is off.  
2 Select the option. Press OK to turn it on  
or off.  
Or,  
Audio balance  
On the remote control, press SOUND to  
enter the menu of sound settings.  
With [Balance], you can improve listening  
experience by adjusting difference between  
the left and right audio channels.  
To exit the menu of sound settings,  
press BACK.  
1 From Home screen, go to [Settings] >  
[Sound settings] > [Balance].  
Bass and treble  
Or, press SOUND on the remote  
control to enter the menu of sound  
settings.  
Use [Bass / Treble] to adjust the low (bass) or  
high (treble) range of musical notes.  
EN 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To set screensaver  
2 Press / repeatedly to increase/decrease  
the output from left/right audio channels.  
1 On MCi8080, select and play a picture.  
Press CLEAR for equal output from  
left/right audio channels.  
2 Press SETTINGS on the remote control  
to select [Settings] > [Display settings] >  
[Screen saver].  
3 In [Screen saver], select [Current  
Display settings  
picture].  
» Current picture is set as screensaver.  
Brightness  
On MCi8080, you can adjust the brightness  
of the display. As desired, the display lights up,  
dims or turns off when MCi8080 is turned on  
or switched to active standby.  
Slideshow settings  
When in the slideshow mode, you can view  
pictures one by one.  
In [Settings] > [Display settings] >  
[Brightness when on] or[Brightness  
when standby], select an option and  
press OK.  
To select a play mode for slideshow  
1 From the home screen, go to [Settings] >  
[Slideshow settings].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
Wallpaper  
2 Select one of the following play modes.  
For menus on MCi8080, you can set the  
background display (wallpaper).  
Press OK to turn it on or off.  
» [Repeat]: Play all pictures repeatedly;  
To set wallpaper  
» [Shuffle]: Play all pictures randomly.  
1 On MCi8080, select and play a photo.  
To set the play time of each picture  
2 Press SETTINGS on the remote control  
to select [Settings] > [Display settings] >  
[Wallpaper].  
1 From Home screen, go to [Settings] >  
[Slideshow settings] > [Time per slide].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
3 In [Wallpaper], select [Current picture].  
» Current picture is set as wallpaper.  
2 In [Time per slide], select the desired  
time duration.  
Screensaver  
On MCi8080, the screensaver is turned on  
when MCi8080 is switched to active standby.  
Album art  
Album art (the picture of CD/album cover) is  
sometimes available for music downloads.With  
some media management software, album  
art can be inserted for the songs. By turning  
[Album art] on or off, you can choose whether  
to show the picture of CD/album cover for  
corresponding songs.  
When turned on, the selected screensaver  
appears. The clock is shown on the lower right  
corner of the screen.  
By default, clock display appears as the  
screensaver.  
56 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To turn on [Album art]  
Clicker sound  
MCi8080 can give you an audible feedback  
(clicker sound) every time you press a button  
on the remote control.  
1 From the home screen, go to [Settings] >  
[Album art].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
You can turn the clicker sound on or off in  
[Settings] >[Clicker sound].  
2 Select [Album art]. Press OK to turn it  
on or off.  
If [Album art] is on,  
» In the list of songs, the album art  
appears as thumbnail along with the  
corresponding song.  
Clock settings  
Alarm  
Set the alarm  
1 Ensure that you have set the clock (see  
‘Settings’->’Date and time’).  
2 From Home screen, go to [Settings] >  
[Clock settings] >[Alarm].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
3 To set the source of alarm sound,  
Select [Music];  
» During the song play, the album  
art is displayed in full screen as the  
background.  
» At the set alarm time, last played  
song starts/resumes, or you tune  
to the last played Internet radio  
station.  
Select [Buzzer].  
» At the set alarm time, the buzzer  
sounds.  
4 To set the alarm time,  
Press and hold / , or press  
/
repeatedly until you reach the  
desired digits. Press OK to confirm.  
Or, enter the desired digits by using  
the alphanumeric buttons on the  
remote control.  
» The alarm icon appears on the  
screen.  
EN 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To play a song or Internet radio station as  
the next alarm sound  
Sleep timer  
With the sleep timer, you can have MCi8080  
turned off automatically after the set timer  
duration.  
1 Ensure that you have selected [Music] in  
the Step 3 above;  
2 Before you turn off MCi8080, or switch  
To set the time duration  
MCi8080 to active standby,  
Go to [Media Library], and select  
and play the desired song;  
1 From the home screen, go to [Settings] >  
[Clock settings] > [Sleep timer].  
Or, go to [Internet Radio], and tune  
to the desired station.  
Or, press SETTINGS on the remote  
control to enter [Settings].  
Use the alarm  
2 Select an option. Press OK to turn it on.  
At the set alarm time, music/Internet radio  
plays as desired, or the buzzer sounds.  
Date and time  
The date and time can be set automatically or  
manually.  
Note  
The alarm sounds even if you have switched  
MCi8080 to active standby or Eco standby.  
Automatic setting  
The buzzer sounds instead, if MCi8080 fails to  
connect to a music library or an Internet radio  
station.  
For automatic clock setting, use the online  
service over the Internet, or use the time  
signal from FM RDS radio.  
MCi8080 is unmuted if it has been muted.  
The alarm sounds in a higher volume if the  
Through the online service over the Internet  
volume level is lower than minimum.  
1 Turn on the unit, if necessary.  
To snooze the alarm  
Ensure that the unit is connected to  
the home Wi-Fi/wired network and  
Internet.  
Press any button on the unit or  
the remote control (except for the  
volume buttons).  
2 From Home screen, select [Settings] >  
» The alarm sounds again 15  
minutes later.The alarm icon  
remains.  
[Clock settings] > [Date and time].  
Or, press SETTINGS on the remote  
control to enter [Settings].  
To stop the alarm  
3 In [Date and time], select [Current date  
and time] > [Automatic (Internet)].  
» The unit starts auto time setting over  
the Internet.  
Press and hold or .  
» The alarm is stopped.The alarm  
icon disappears.  
» The alarm sounds again next day.  
» A message appears when the setting  
is done.  
To turn off the alarm  
Go to [Settings] > [Clock settings]  
> [Alarm]. Select [Alarm off] and  
press OK on the remote control.  
58 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual setting  
13  
1 Turn on the unit, if necessary.  
2 From Home screen, select [Settings] >  
Automatic (Internet)  
[Clock settings] >[Date and time].  
Or, press SETTINGSon the remote  
Automatic (RDS)  
Manual  
control to enter [Settings].  
3 In [Date and time], select [Current date  
and time] > [Manual].  
4 To enter date and time,  
Press or to select the entry  
location;  
Use the alphanumeric buttons to  
enter desired digits;  
Press OK to confirm.  
You can also press or  
repeatedly, or press and hold or  
until the desired digit appears.  
Tip  
According to the location and time zone you  
select, the unit can have the clock time set  
and adjusted automatically through the online  
service over the Internet.  
To check and change current location and time  
zone, go to [Settings] > [Location and time  
zone].  
Set date/time format  
Select how date and time are displayed in the  
clock.  
Through time signals from FM RDS radio  
1 On the unit, turn on the FM radio, if  
1 Follow Step 1-2 under “Manual setting”.  
necessary.  
Ensure that the FM antenna is  
connected properly CA-MCI8080-  
Connect the FM antenna (see  
‘Connect the FM antenna’ on page  
23).  
2 In [Date and time], go to [Time format]  
or [Date format] to select options.  
Network settings  
2 On the first location for preset stations,  
store an FM RDS station that transmits  
time signals.  
Setup network  
3 From Home screen, select [Settings] >  
After the first-time setup, you can change how  
MCi8080 connectsto home Wi-Fi/wired network:  
[Clock settings] > [Date and time].  
Or, press SETTINGSon the remote  
Switch between different connection  
methods (wireless or wired,  
automatic or manual);  
Switch between different routers.  
To do so, do the following:  
control to enter [Settings].  
4 In [Date and time], select [Current date  
and time] > [Automatic (RDS)].  
» The unit searches for the first preset  
station automatically.  
1 From Home screen, go to [Settings] >  
» The time is set according to time  
[Network settings] > [Setup network].  
signals from the station.  
Or, press SETTINGS on the remote  
control to enter [Settings].  
EN 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Connect MCi8080 as you did in the  
first-time setup (see ‘First-time setup’-  
>’Connect to home Wi-Fi/wired  
network’).  
Language  
After the first-time setup, you can change the  
language selection in [Settings] > [Language].  
Device name  
Device information  
In [Device name], you can name/rename your  
MCi8080. On a connected UPnP server/client,  
the MCi8080 can be found as named.  
From the home screen, go to [Settings] >  
[Device ID and information].You can learn  
about information about MCi8080, including  
model number, name to be shown on a UPnP  
server/client, software version and network  
settings.  
1 From Home screen, go to [Settings] >  
[Network settings] > [Device name].  
2 In [Device name], press / to select the  
entry location; press  
select desired letters.  
/
repeatedly to  
Check for software upgrades  
On the MCi8080, you can check for software  
upgrades.After you click to agree to the terms  
and conditions, the downloading and installation  
of new upgrades start automatically.  
USB sharing  
When you connect MCi8080 to home Wi-  
Fi/wired network, the HDD connected to  
MCi8080 can work as a shared disk of the  
network. Contents on the HDD can be played  
or shared on computers or UPnP devices that  
are also connected to the network.  
1 Ensure that MCi8080 is connected to the  
Internet.  
2 From Home screen, go to [Settings] >  
To permit or prohibit the sharing, go  
to [Settings] > [Network settings]  
> [USB sharing]. Press OK to turn  
on or off the sharing.  
[Check for software upgrades].  
Demo mode  
After the first-time setup, you can view the  
demo again.  
Location and time zone  
After the first-time setup, you can change the  
selected location and time zone when moving  
to a new location or time zone.  
According to the selected location and time  
zone, MCi8080 can  
1 From Home screen, go to [Settings] >  
[Demo mode].  
» Demo play starts.  
2 To exit the demo play, press  
.
» The unit is switched to Eco standby.  
Set clock automatically over the  
Internet (see ‘Settings’->’Date and  
time’);  
Pre-load preset Internet radio  
stations automatically.  
60 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restore factory settings  
You can restore MCi8080 to factory settings.  
All your settings are removed, including the  
settings of network, sound, display, clock, alarm  
and language.  
1 Go to [Settings] > [Restore factory  
settings].  
2 As prompted, select [Yes].  
» The unit is turned off.  
» The unit is turned on again  
automatically when the factory settings  
are restored.  
» Start the first-time setup.  
EN 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To get the product model number  
12 Register  
MCi8080 with  
Philips  
Look at the packaging box of the  
device or the product label. You can  
always find the model number on  
the packaging box or product label  
(e.g. MCi8080, NP3700).  
Benefits  
By registering MCi8080 on www.philips.com/  
welcome, you can  
Get free software upgrades;  
Manage your own favorite radio stations;  
Receive Streamium newsletters.  
Note  
Registration of MCi8080 requires a valid email  
address.  
To get the product registration ID  
On MCi8080, go to [Settings] >  
[Device ID and information]. Press  
repeatedly to find [Product  
Registration ID].  
Register MCi8080  
Use a valid email address as the account when  
you register MCi8080 on www.philips.com/  
welcome.  
Register on the device  
You can complete the registration directly on  
www.philips.com/welcome. Or, use an email  
address to register on the device, and then,  
complete the registration through the web site  
link that you received in the email.  
Use an email address to register on the  
device, and then, complete the registration  
through the web site link that you received in  
the email.  
1 Ensure that MCi8080 is connected to the  
Internet.  
Register on the web site  
2 To register with www.philips.com/  
To register MCi8080 directly on www.philips.  
com/welcome, you need to fill in the following  
information as prompted during registration:  
welcome,  
On MCi8080, select [Settings] >  
[User registration] > [Register now]  
> [Register on the device];  
A valid email address as the registration  
account;  
As prompted, enter your valid  
email address (see ‘Your MCi8080’-  
>’Overview’->’Text entry’).  
Product model number;  
Product registration ID.  
» You receive an email message  
from ConsumerCare@Philips.com.  
62 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On a computer, use the web site link  
in the email to complete registration.  
Tip  
To log in to Philips online services later,  
use the web site link in the email, and the  
password.  
Unregister MCi8080  
When registering with www.philips.com/  
welcome, you can only use one account for one  
unit (e.g. MCi8080). For each account, you can  
maintain a set of favorite stations and manually  
added stations.  
To use another account for registration, you  
need to unregister current one.  
To unregister an account  
1 On MCi8080, select [Settings] > [User  
registration] >[Unregister].  
2 As prompted, confirm to start  
unregistering the account.  
Tip  
When re-registering the account, you can  
recover the Internet radio stations that you  
maintained with Philips online services.  
Check registration  
information  
You can check whether you have registered  
the MCi8080, and what account you have  
used for registration.To check the information,  
go to [Settings] > [User registration] >  
[Registration status].  
EN 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 Maintenance  
This chapter tells you how to care for MCi8080.  
Cleaning  
Note  
Avoid moisture and abrasion.  
1 Clean MCi8080 only with a soft dry cloth.  
64 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio outputs  
14 Technical data  
Headphones  
General  
1 x 3.5mm jack, 20 – 18000Hz, 32Ω (Ohms)  
Signal to noise ratio (Headphones)  
typically ≥ 85dBA (IEC)  
Distortion (Headphones)  
≤ 1%  
AC Power (Main unit)  
230V 10%, 50Hz (for /12, /05 /79)  
120V 10%, 60Hz (for /37)  
DC Power (DVD unit)  
DIN connector (Output provided by Main  
unit)  
Audio /Video outputs (only provide output  
during disc playback)  
DC Power (HDD unit)  
5V USB power, 900mA (Provided by Main  
unit)¹  
CVBS  
1 x Cinch, 1Vpp, 75 Ohm  
HDMI  
Dimensions  
480i, 480p, 576i, 576p, 1080i, 1080p  
Video system  
Main unit: 251 x 251 x 142mm (including  
LCD)  
PAL / NTSC  
Video format  
4:3 / 16:9  
DVD unit: 251 x 251 x 74mm  
HDD unit: 122 x 75 x 13mm  
Speaker box: 180 x 282.9 x 295mm  
Weight (net)  
Audio amplifier (Digital)  
12.50kg (all items)  
Output power  
2 x 50W (RMS) (= total power 100W)  
Note  
Frequency response  
20Hz to 20000Hz ( 0.5dB)  
Signal to noise ratio  
¹Use HDD only with the by-packed USB wire.  
Power consumption  
typically 92dB/ ≥ 93dBA  
Active (On)  
50W  
Speakers  
(Active) Standby  
≤ 12.5W (HDD-spun down)  
ECO (Passive) Standby  
≤ 0.9W  
Power handling  
50W (RMS)  
Impedance  
8Ω (Ohms)  
Sensitivity  
83dB/ 1m / W  
Dimensions  
Woofer: 5.25 inches  
Tweeter: 1.00 inches  
Frequency response  
75 to 20000Hz  
Audio inputs  
Aux in (Line in)  
2x Cinch  
Input sensitivity  
0.8V  
Input impedance  
> 10kΩ (Ohms)  
EN 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound features  
Internet services  
FullSound®  
Internet radio  
Yes (on/ off)  
Media Library  
Bass / Treble control  
+/ - 10 steps  
Balance control  
+/ - 10 steps  
Decoding capabilities (excluding the disc  
player)  
MP3  
Direct Source (Flat)  
Yes (on/ off)  
8 - 320kbps (CBR / VBR)  
WMA  
32kbps - 192kbps (CBR / VBR)  
WMT DRM - ND (WMA DRM - 10)  
Yes, enabled (only from a UPnP server)  
AAC (M4A)  
16 - 320kbps (CBR / VBR)  
PCM/ WAV  
Wireless  
Wireless standard  
802.11n, backwards compatible to 802.11b/ g  
Wireless security  
WEP (64 or 128 bit),  
WPA / WPA2 (8-63 characters)  
Frequency range  
1x (1.4Mbps)  
FLAC  
2412 - 2462 MHz (CH1-CH11) (for /79, /37,  
Yes, supported  
Ogg Vorbis  
Yes, supported  
eAAC+  
Yes, supported  
JPEG  
Yes, supported (Maximum size: 7MB)  
/55, /97)  
2412 - 2472 MHz (CH1-CH13) (for /12, /05)  
Antenna  
1 x external, diversity mode enabled  
Wireless protected setup (WPS)  
Yes (PBC + PIN)  
Wired (LAN / Ethernet)  
Playlist support (excluding the disc player)  
Wired standard  
802.3 / 802.3 u  
Speed  
10 / 100mbps  
*.m3u, *.wpl  
Yes  
iTunes, Rhapsody  
Yes (via by-packed UPnP Server)  
Mode  
half / full duplex  
Crossover detection (Auto MDIX)  
Yes  
Note  
The wired and wireless network interfaces  
cannot be turned on at the same time.  
66 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FMTuner  
USB  
Frequency range  
87.50 to 108.00MHz  
No. of Presets  
60  
USB port type  
Type A  
Supported media  
FAT, FAT-32, NTFS V 3-1  
Signal noise ratio  
Typically 60dB  
Tuning grid  
50kHz  
RDS  
Supported class  
MSC only (no MTP support)  
Multi-partition support  
No, only first readable partition  
Database support  
Yes, including RDS clock setting  
Antenna connector  
IEC (75 Ohm)  
Up to 40000 songs  
HDD  
Disc type  
2.5 inches  
Size  
DISC player  
Supported discs  
DVD, VCD, SVCD, DVD+RW, DVD-RW,  
DVD+R, DVD-R, Picture (JPEG) CD, DivX  
(Ultra) Disc, MP3 / WMA CDR / CDRW,  
CD (CDDA)  
160GB³  
Format  
FAT32  
Disc size support  
8cm/ 12cm  
Note  
³Available disc size is less due to preloaded  
contents.  
Video decoding  
MPEG 1, MPEG 2, DivX, JPEG  
Audio decoding  
MP3: 32 to 320kbps (Sampling rate: 32, 44.1,  
48kHz)  
WMA: 32 to 360kbps (Sampling rate: 44.1,  
48kHz)  
RDS  
Yes; PTY, PS, Text including RDS clock setting  
HDMI Audio support  
Yes  
EN 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display/Clock  
Resolution  
Dotmatrix, 320 x 240 dots (QVGA), Color  
TFT  
Size  
3.5 inches  
Backlight  
Can be turned on/ off and can be dimmed  
Clock/ Date display  
Yes  
Wallpaper/ Screensaver  
Yes  
Automatic time setting via Internet (NTP)  
Yes, enabled  
Sleep timer  
Yes  
Internal (key) clicker  
Yes  
Others  
UPnP²  
DMP (Local Renderer, Local Controlpoint)/  
DMS  
Note  
² Requires User-registration @ Rhapsody.  
² Capable to connect to - Windows Media  
Player 11/12, Winamp, TwonkyMedia;- Philips  
Music Center WAC3500 / WAC7500 /  
MCi500H;- Philips NAS SPD8020CC;- Mobile  
phone Nokia N85, N95,N900.  
Specifications and external appearance are  
subject to changes without notice.  
68 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 Troubleshooting  
I cannot hear any sound or the sound is poor,  
what do I do?  
Press + VOL - to increase the volume.  
Press the MUTE button again to  
reactivate the sound output.  
Is there a maximum distance of transmission  
between a wireless router and MCi8080 for  
effective streaming?  
Yes. The maximum distance of Wi-Fi  
transmission is 250m measured in open  
spaces. However, in a home environment,  
where solid obstacles such as walls and  
doors are present, the effective transmission  
distance is reduced to 50-100m. Reposition  
the devices if you experience transmission  
problems.  
I have not received any registration email from  
ConsumerCare@Philips.com.  
Check that the email address that is  
entered in the user registration section is  
valid and spelled correctly.  
Check that the PC has an active Internet  
connection.  
The Internet server may be busy, try  
again later.  
Check if the email was redirected to the  
spam folder.  
How do I avoidWi-Fi interferences from  
other devices that operate in the same  
(2.4GHz) frequency spectrum, such as Dect  
phones or bluetooth devices?  
Move MCi8080 at least 3m away from  
such devices.  
Use a WEP/WPA encryption key when  
you create the wireless connection your  
PC / home network.  
Change the operating channel on the  
interfering devices.  
Turn the devices in different directions to  
minimize interference.  
EN 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pakistan  
Peru  
Philippines  
Poland  
Portugal  
051 580 902-3  
0800 00100  
(63 2) 667 9000  
8003111318  
800780903  
800894910  
(495)961-1111 (local  
rate)8-800-200-0880  
(mobile phone - free)  
65 6882 3999  
800004537  
(011) 471-5194  
900800655  
16 Contact  
information  
Argentina  
Australia  
Austria  
Belgium  
Belarus  
Brazil  
(54-11) 4544-2047  
1300 363 391  
0810 000 205  
78250145  
882000110068  
0800 701 02 03 (all  
except Sao Paulo)(11)  
2121-0203 (Sao Paulo  
only)  
Romania  
Russia Federation  
Singapore  
Slovakia  
South Africa  
Spain  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Ukraine  
Bulgaria  
Canada  
Chile  
8001154424  
1-888-744-5477  
600 744 5477 (600-  
PHILIPS)  
857929100  
844800544  
0800 231 099  
66 2 652 8652  
0800 261 3302  
8-800-500-69-70  
8003316015  
1-888-744-5477  
(598-2) 619 6666  
0800 100 4888  
China  
Colombia  
Croatia  
4008 800 008  
01 800 700 7445  
800222778  
United Kingdom  
United States  
Uruguay  
Czech Republic  
Denmark  
Estonia  
800142840  
35258759  
8000100288  
923113415  
Venezuela  
Finland  
France  
805025510  
Germany  
Greece  
Hong Kong  
Hungary  
India  
8000007520  
80031221280  
852-2619 9663  
680018189  
1860-180-1111  
16011777  
Ireland  
Israel  
Italy  
9600900-09  
800088774  
Japan  
Korea  
Latvia  
0570-07-6666  
080-600-6600  
80002794  
Luxembourg  
Malaysia  
Mexico  
Netherlands  
New Zealand  
Norway  
4066615644  
1800 880 180  
01 800 504 6200  
8000230076  
0800 658 224  
22708111  
70 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Streamium terms and conditions  
Terms and Conditions of Use of your Philips Streamium-enabled Device  
Congratulations on your purchase of a Philips Streamium-enabled Device (“Device”).These Terms and  
Conditions of Use give you the rights to use certain features on your Device relating to the streaming of  
content. You must agree to these Terms and Conditions of Use before using the Device.Your use of the Device  
constitutes your agreement to be bound by these Terms and Conditions of Use and will give you the right to  
access these features. If you do not agree to these Terms and Conditions of Use, you may return your Device to  
the point of purchase.These Terms and Conditions of Use supplement, and do not replace, any terms, conditions  
or disclaimers which were provided with your purchase of the Device.All such terms, conditions and disclaimers  
remain in full force and effect.  
Eligibility for Registration.  
You must be at least 14 years of age to assume the responsibilities of these Terms and Conditions of Use. If you  
are under 14 years of age, you may not use the Device unless one of your parents or legal guardians assumes  
the responsibilities of these Terms and Conditions of Use.Your use of the Device constitutes your  
representation that you are either 14 years of age or, if you are under 14 years of age, that your parent or legal  
guardian has assumed the responsibilities of these Terms and Conditions of Use.  
Restrictions on Modification of your Device  
Your Device provides access to certain streams of content.As a condition of obtaining access to those streams  
through the Device, you agree not to tamper with or otherwise modify or attempt to modify the Device in any  
way (including through the use of software or by making physical alterations to the Device).You agree that you  
will not circumvent or attempt to circumvent technological measures employed to control access to, or the  
rights in, any content.You agree that you will not circumvent or attempt to circumvent any copy management  
system by any means.You agree that you will not decipher or attempt to decipher cryptographic keys or  
otherwise defeat or attempt to defeat any security features implemented in the Device or in the content  
streams.You agree that you will not use the Device for any unauthorized purpose or in contravention of any law  
or regulation.  
Disclaimers Regarding Content  
The streams of content which are accessible through your Device are not controlled or programmed by Philips.  
Rather, they are provided by third parties.Think of your Device (in addition to its other features) as a form of  
“tuner” which allows you to receive the content broadcast by many others outside of your local area. Since the  
content is provided by others, PHILIPS HAS NO EDITORIAL CONTROL OVER ANY OF THAT CONTENT  
RECEIVED THROUGHYOUR DEVICE AND,THEREFORE IS NOT LIABLE FOR CONTENT OR ITS NATURE  
OR DELIVERY. PHILIPS DOES NOT ENDORSE ANY OPINIONS EXPRESSED IN ANY CONTENT RECEIVED  
THROUGHYOUR DEVICE. PHILIPS DOES NOT GUARANTEE THE TRUTHFULNESS,ACCURACY,  
RELIABILITY, COMPLETENESS OR TIMELINESS OF CONTENT.YOU AGREE THAT ANY RELIANCE ON  
CONTENT IS ATYOUR OWN RISK.  
Limitations on Access to Streams.  
Philips does not guarantee access to any particular stream or to the content contained in any stream. Philips  
may, in its discretion, add or remove access to any specific stream or content at any time. Some streams are  
accessible through arrangements with online service providers which determine which streams are listed on  
their directories.Although Philips will strive to provide a good selection of online service providers, Philips does  
not guarantee continued access to any specific online service provider. Philips may, in its discretion, add or  
remove access to any specific online service provider.  
Rights in Content  
Content may be protected by copyright laws or other intellectual property or proprietary laws. In some  
situations, such as use of the Device in a commercial environment, it may be necessary for you to obtain, at your  
own risk, a license or other authorization to use such content.You agree that, in the event such a license or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
authorization is necessary, it is your responsibility to obtain any such license or authorization.You agree that you  
are solely liable for any damages you may incur resulting from your failure to obtain the proper license or  
authorization for use of the content accessible through the Device.You agree that Philips will have no liability to  
you with regard to your use of the content.  
Changes in Features  
Philips may, in its discretion, change the features of the Device, including adding features to, or removing features  
from, the Device. Some new features may require changes to these Terms and Conditions of Use.Your use of  
those new features will constitute your agreement to the revised Terms and Conditions of Use.  
Software and Intellectual Property Rights  
You may need to use certain software programs to use or have full access to certain features of the Device.You  
received certain software with the purchase of the Device and may receive other software from time to time in  
the future. Most of that software is contained in the Device and is not accessible to you. Some of that software  
is owned by Philips and some is owned by others.Your use of software owned by Philips is subject to these  
Terms and Conditions of Use and any applicable license agreement.Your use of software owned by others is  
governed by their applicable license agreements.Your use of software does not transfer any title or ownership  
rights in the software to you. Philips retains all its rights in software and other intellectual property, including  
copyrights, patent rights, and rights in its trademarks and trade names.You agree that you will not disassemble,  
decompile, create derivative works of, reverse engineer, modify, sublicense, distribute the software or use the  
software for any unauthorized purpose or in contravention of any law or regulation.  
Warranty Disclaimer  
PHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,THAT THE DEVICE WILL  
MEETYOUR REQUIREMENTS OR THAT THE USE OF THE DEVICE WILL BE UNINTERRUPTED,TIMELY,  
SECURE OR FREE FROM ERRORS. PHILIPS MAKES NO WARRANTY AS TO THE CONTENT CARRIED IN  
ANY STREAM. PHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,AS TO THE  
INFORMATION OR CONTENT ACCESSED THROUGHYOUR DEVICE OR TOYOUR RELIANCE ON, OR  
USE OF,ANY INFORMATION OR CONTENT ACCESSED THROUGHYOUR DEVICE. SPECIFIC  
WARRANTIES WERE PROVIDED WITHYOUR PURCHASE OFYOUR DEVICE AND THOSE WARRANTIES,  
INCLUDING ANY DISCLAIMERS TO THOSE WARRANTIES, CONTINUE TO APPLY. Because some  
jurisdictions do not permit the disclaimer of implied warranties, such disclaimers may not apply to you.  
Limitation of Liability  
PHILIPS WILL NOT BE LIABLE TOYOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, INCIDENTAL,  
PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR LOST SAVINGS)  
OR FOR LOSS OF DATA OR BUSINESS INTERRUPTION ARISING OUT OF OR RELATING TOYOUR USE  
OF THE DEVICE WHETHER OR NOT SUCH DAMAGES ARE BASED ON TORT,WARRANTY, CONTRACT  
OR ANY OTHER LEGAL THEORY - EVEN IF PHILIPS HAS BEEN ADVISED, OR IS AWARE, OF THE  
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL PHILIPS CUMULATIVE LIABILITY FOR DAMAGE  
(FROM ANY CAUSE WHATSOEVER) EXCEED THE AMOUNTYOU PAID FORYOUR DEVICE.  
Miscellaneous  
“This agreement will be governed by the laws of the jurisdiction in which the Device was sold and you hereby  
consent to the non-exclusive jurisdiction of courts in the relevant country. If any provision of this agreement is  
invalid or unenforceable under applicable law, such provision will be deemed modified to the extent necessary  
to render such provision valid and enforceable and the other provisions of this agreement will remain in full  
force and effect.These Terms and Conditions of Use will not be governed by the United Nations Convention of  
Contracts for the International Sale of Goods, the application of which is hereby expressly waived.”  
BY USINGYOUR DEVICE,YOU REPRESENT THATYOU HAVE READ AND UNDERSTOOD THESE TERMS  
AND CONDITIONS OF USE AND THATYOU ACCEPT THEM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTICE  
SOFTWARE END USER LICENSE AGREEMENT  
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING  
AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER  
ELECTRONICS B.V.A DUTCH LIMITED LIABILITY COMPANY,WITH ITS PRINCIPAL OFFICE AT GLASLAAN  
2, 5616 LW EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND  
COLLECTIVELY PHILIPS”).THIS AGREEMENT GIVES YOU THE RIGHT TO USE CERTAIN SOFTWARE (THE  
“SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE BEEN  
PROVIDED SEPARATELY OR TOGETHER WITH A PHILIPS PRODUCT (THE “DEVICE”) OR A PC. BY  
DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE,YOU ACCEPT AND AGREE TO  
BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE  
TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR OTHERWISE USE THE  
SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE  
OPPORTUNITY TO REVIEW THIS LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A  
FULL REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE IF YOU RETURN THE  
SOFTWARE UNUSED WITH PROOF OF PAYMENT WITHIN 30 DAYS FROM THE DATE OF PURCHASE.  
1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license  
to install and use, on the Device or a PC, as applicable, one (1) copy of the specified version of the Software in  
object code format as set out in the user documentation solely for your personal use.The Software is “in use”  
when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device.  
2. Ownership. The Software is licensed and not sold to you.This Agreement grants you only the right to use  
the Software, but you do not acquire any rights, express or implied, in the Software other than those specified  
in this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including all  
patents, copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is  
protected by copyright laws, international treaty provisions, and other intellectual property laws. Therefore,  
other than as expressly set forth herein, you may not copy the Software without prior written authorization of  
Philips, except that you may make one (1) copy of the Software for your back-up purposes only.You may not  
copy any printed materials accompanying the Software, nor print more than one (1) copy of any user  
documentation provided in electronic form, except that you may make one (1) copy of such printed materials  
for your back-up purposes only.  
3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign,  
loan, or otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse  
engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits  
the foregoing restriction.You may not remove or destroy any product identification, copyright notices, or other  
proprietary markings or restrictions from the Software. All titles, trademarks, and copyright and restricted  
rights notices shall be reproduced on your back up copy of the Software. You may not modify or adapt the  
Software, merge the Software into another program or create derivative works based upon the Software.  
4.Termination of certain functionality. The Software may contain components of certain licensed software  
including software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital  
rights management technology for Windows Media. Content providers are using the digital rights management  
technology for Windows Media (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so  
that their intellectual property, including copyright, in such content is not misappropriated. Your Device may also  
use WM-DRM software to transfer or play Secure Content (“WM-DRM Software”). If the security of such  
WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon the request of the  
owners of Secure Content (“Secure Content Owners”)) the WM-DRM Software’s right to acquire new licenses  
to copy, store, transfer, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device  
whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also  
download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your  
Device’s ability to copy, store, display, transfer, and/or play Secure Content. Secure Content Owners may also  
require you to upgrade some of the WM-DRM components distributed with this Software (“WM-DRM  
Upgrades”) before accessing their content. When you attempt to play Secure Content,WM-DRM Software built  
by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consent before the  
WM-DRM Upgrade is downloaded. WM-DRM Software built by Philips may do the same. If you decline the  
upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade; however, you will  
still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM  
features that access the Internet, such as acquiring new licenses and/or performing a required WM-DRM  
Upgrade, can be switched off. When these features are switched off, you will still be able to play Secure Content  
if you have a valid license for such content already stored on your Device. However, you will not be able to use  
certain of the WM-DRM Software features that require Internet access such as the ability to download content  
that requires the WM-DRM Upgrade. All title and intellectual property rights in and to the Secure Content is  
the property of the respective Secure Content owners and may be protected by applicable copyright or other  
intellectual property laws and treaties. This Agreement grants you no rights to use such Secure Content. To  
summarize, if the Software contains Microsoft WM-DRM components – Secure Content you  
desire to download, copy, store, display, transfer, and/or play is protected by the Microsoft  
WM-DRM components of the Software. Microsoft, Secure Content Owners, or Secure Content  
distributors may deny you access, or restrict your access, to Secure Content even after you have  
paid for, and/or obtained, it. Neither your consent nor the consent or approval of Philips is  
necessary for any of them to deny, withhold or otherwise restrict your access to Secure Content.  
Philips does not guaranty that you will be able to download, copy, store, display, transfer, and/or  
play Secure Content.  
5. Open Source Software. (a) This software may contain components that are subject to open-source terms,  
as stated in the documentation accompanying the Device. This Agreement does not apply to this software as  
such. (b)Your license rights under this Agreement do not include any right or license to use, distribute or create  
derivative works of the Software in any manner that would subject the Software to Open Source Terms. “Open  
Source Terms” means the terms of any license that directly or indirectly (1) create, or purport to create,  
obligations for Philips with respect to the Software and/or derivative works thereof; or (2) grant, or purport to  
grant, to any third party any rights or immunities under intellectual property or proprietary rights in the  
Software or derivative works thereof.  
6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall  
terminate (i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii)  
upon destruction of all copies of the Software and related materials provided to you by Philips hereunder.  
Philips’s rights and your obligations shall survive the termination of this Agreement.  
7. Upgrades. Philips may, at its sole option, make upgrades to the Software available by general posting on a  
website or by any other means or methods. Such upgrades may be made available pursuant to the terms of this  
Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement.  
8. Support Services. Philips is not obligated to provide technical or other support (“Support Services”) for  
the Software. If Philips does provide you with Support Services, these will be governed by separate terms to be  
agreed between you and Philips.  
9. Limited Software Warranty. Philips provides the Software ‘as is’ and without any warranty except that  
the Software will perform substantially in accordance with the documentation accompanying the Software for a  
period of one year after your first download, installation or use of the Software, whichever occurs first. Philips’  
entire liability and your exclusive remedy for breach of this warranty shall be, at Philips’ option, either (i) return  
of the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does not  
Download from Www.Somanuals.com. All Manuals Search And Download.  
meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited  
warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful  
application. Any replacement Software will be warranted for the remainder of the original warranty period or  
thirty (30) days, whichever is longer. This limited warranty shall not apply to you if theif the Software was  
provided to you free of charge on an evaluation only basis.  
10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND ITS LICENSORS DO  
NOT WARRANT THAT THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL  
MEET YOUR REQUIREMENTS.YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE  
TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS  
OBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,  
PHILIPS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS,WHETHER EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, AND ACCURACY OR COMPLETENESS OF RESULTS WITH RESPECT TO  
THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST  
INFRINGEMENT. PHILIPS DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD, COPY,  
STORE, DISPLAY,TRANSFER,AND/OR PLAY SECURE CONTENT.  
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE  
LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES  
WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES,  
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER  
PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES. IN NO EVENT SHALL PHILIPS’ OR ITS LICENSORS’ AGGREGATE LIABILITY FOR  
DAMAGES ARISING OUT OF THIS AGREEMENT EXCEED THE GREATER OF THE PRICE ACTUALLY PAID  
BYYOU FOR THE SOFTWARE OR FIVE TEN POUNDS STERLINGUS DOLLARS (510.00).  
12. Trademarks. Certain of the product and Philips names used in this Agreement, the Software, and the  
printed user documentation may constitute trademarks of the Philips, its licensors or other third parties. You  
are not authorized to use any such trademarks.  
13. Export Administration. You agree that you will not directly or indirectly, export or re-export the  
Software to any country for which the United States Export Administration Act, or any similar United States law  
or regulation requires an export license or other U.S. Government approval, unless the appropriate export  
license or approval has first been obtained. By downloading or installing the Software you agree to abide by this  
Export provision.  
14. Governing law. This Agreement is governed by the laws of your country of residence ,residence, without  
reference to its conflict of laws principles. Any dispute between you and Philips regarding this Agreement shall  
be subject to the non-exclusive jurisdiction of the courts of your country of residence.  
15. General. This Agreement contains the entire agreement between you and Philips and supersedes any prior  
representation, undertaking or other communication or advertising with respect to the Software and user  
documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in  
full force and effect.This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Written Offer  
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a  
copy of the corresponding source code for the open source software packages  
used in this product for which such offer is requested by the respective licenses.  
This offer is valid up to three years after product purchase.To obtain source  
code, please contact open.source@philips.com. If you prefer not to use email  
or if you do not receive confirmation receipt within a week after mailing to this  
email address, please write to Open SourceTeam, Philips Intellectual Property  
& Standards, P.O. Box 220, 5600 AE Eindhoven,The Netherlands. If you do not  
receive timely confirmation of your letter, please email to the email address  
above.  
This product uses the following open source software:  
uClinux for Blackfin 2009R1 Release <http://blackfin.uclinux.org/>, licensed  
under GPLV2,  
BusyBox R1.13.4 <http://www.busybox.net/>, licensed under GPLV2,  
Samba r3.0.25a <http://samba.org/samba/>, licensed under GPLV2,  
WirelessTools for Linux v29 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/  
Linux/Tools.html>, licensed under GPLV2,  
NTFS-3G driver r2009.11.14 <http://www.tuxera.com/community/>, licensed  
under GPLV2,  
Das U-Boot r1.1.6 <http://www.denx.de/wiki/U-Boot>, with exclusions for user  
programs.  
NOTE!This copyright does *not* cover the so-called "standalone"  
applications that use U-Boot services by means of the jump table  
provided by U-Boot exactly for this purpose - this is merely  
considered normal use of U-Boot, and does *not* fall under the  
heading of "derived work".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The header files "include/image.h" and "include/asm-*/u-boot.h"  
define interfaces to U-Boot. Including these (unmodified) header  
files in another file is considered normal use of U-Boot, and does  
*not* fall under the heading of "derived work".  
Also note that the GPL below is copyrighted by the Free Software  
Foundation, but the instance of code that it refers to (the U-Boot  
source code) is copyrighted by me and others who actually wrote it.  
-- Wolfgang Denk  
Linux kernel release 2.6.xx <http://kernel.org/>, licensed under GPLV2 with  
exclusions for user programs.  
NOTE!This copyright does *not* cover user programs that use kernel  
services by normal system calls - this is merely considered normal use  
of the kernel, and does *not* fall under the heading of "derived work".  
Also note that the GPL below is copyrighted by the Free Software  
Foundation, but the instance of code that it refers to (the Linux  
kernel) is copyrighted by me and others who actually wrote it.  
Also note that the only valid version of the GPL as far as the kernel  
is concerned is _this_ particular version of the license (ie v2, not  
v2.2 or v3.x or whatever), unless explicitly otherwise stated.  
LinusTorvalds  
GPLV2  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General Public  
License is intended to guarantee your freedom to share and change free  
software--to make sure the software is free for all its users. This  
General Public License applies to most of the Free Software  
Foundation's software and to any other program whose authors commit to  
using it. (Some other Free Software Foundation software is covered by  
the GNU Library General Public License instead.) You can apply it to  
your programs, too.  
When we speak of free software, we are referring to freedom, not  
price. Our General Public Licenses are designed to make sure that you  
have the freedom to distribute copies of free software (and charge for  
this service if you wish), that you receive source code or can get it  
if you want it, that you can change the software or use pieces of it  
in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid  
anyone to deny you these rights or to ask you to surrender the rights.  
These restrictions translate to certain responsibilities for you if you  
distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether  
gratis or for a fee, you must give the recipients all the rights that  
you have. You must make sure that they, too, receive or can get the  
source code. And you must show them these terms so they know their  
rights.  
We protect your rights with two steps: (1) copyright the software, and  
(2) offer you this license which gives you legal permission to copy,  
distribute and/or modify the software.  
Also, for each author's protection and ours, we want to make certain  
that everyone understands that there is no warranty for this free  
Download from Www.Somanuals.com. All Manuals Search And Download.  
software. If the software is modified by someone else and passed on, we  
want its recipients to know that what they have is not the original, so  
that any problems introduced by others will not reflect on the original  
authors' reputations.  
Finally, any free program is threatened constantly by software  
patents. We wish to avoid the danger that redistributors of a free  
program will individually obtain patent licenses, in effect making the  
program proprietary. To prevent this, we have made it clear that any  
patent must be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution and  
modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0.This License applies to any program or other work which contains  
a notice placed by the copyright holder saying it may be distributed  
under the terms of this General Public License. The "Program", below,  
refers to any such program or work, and a "work based on the Program"  
means either the Program or any derivative work under copyright law:  
that is to say, a work containing the Program or a portion of it,  
either verbatim or with modifications and/or translated into another  
language. (Hereinafter, translation is included without limitation in  
the term "modification".) Each licensee is addressed as "you".  
Activities other than copying, distribution and modification are not  
covered by this License; they are outside its scope. The act of  
running the Program is not restricted, and the output from the Program  
is covered only if its contents constitute a work based on the  
Program (independent of having been made by running the Program).  
Whether that is true depends on what the Program does.  
1.You may copy and distribute verbatim copies of the Program's  
source code as you receive it, in any medium, provided that you  
conspicuously and appropriately publish on each copy an appropriate  
Download from Www.Somanuals.com. All Manuals Search And Download.  
copyright notice and disclaimer of warranty; keep intact all the  
notices that refer to this License and to the absence of any warranty;  
and give any other recipients of the Program a copy of this License  
along with the Program.  
You may charge a fee for the physical act of transferring a copy, and  
you may at your option offer warranty protection in exchange for a fee.  
2.You may modify your copy or copies of the Program or any portion  
of it, thus forming a work based on the Program, and copy and  
distribute such modifications or work under the terms of Section 1  
above, provided that you also meet all of these conditions:  
a)You must cause the modified files to carry prominent notices  
stating that you changed the files and the date of any change.  
b)You must cause any work that you distribute or publish, that in  
whole or in part contains or is derived from the Program or any  
part thereof, to be licensed as a whole at no charge to all third  
parties under the terms of this License.  
c) If the modified program normally reads commands interactively  
when run, you must cause it, when started running for such  
interactive use in the most ordinary way, to print or display an  
announcement including an appropriate copyright notice and a  
notice that there is no warranty (or else, saying that you provide  
a warranty) and that users may redistribute the program under  
these conditions, and telling the user how to view a copy of this  
License. (Exception: if the Program itself is interactive but  
does not normally print such an announcement, your work based on  
the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the Program,  
and can be reasonably considered independent and separate works in  
themselves, then this License, and its terms, do not apply to those  
sections when you distribute them as separate works. But when you  
distribute the same sections as part of a whole which is a work based  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on the Program, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the  
entire whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is to  
exercise the right to control the distribution of derivative or  
collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program  
with the Program (or with a work based on the Program) on a volume of  
a storage or distribution medium does not bring the other work under  
the scope of this License.  
3.You may copy and distribute the Program (or a work based on it,  
under Section 2) in object code or executable form under the terms of  
Sections 1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable  
source code, which must be distributed under the terms of Sections  
1 and 2 above on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three  
years, to give any third party, for a charge no more than your  
cost of physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to be  
distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer  
to distribute corresponding source code. (This alternative is  
allowed only for noncommercial distribution and only if you  
received the program in object code or executable form with such  
an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for  
making modifications to it. For an executable work, complete source  
code means all the source code for all modules it contains, plus any  
Download from Www.Somanuals.com. All Manuals Search And Download.  
associated interface definition files, plus the scripts used to  
control compilation and installation of the executable. However, as a  
special exception, the source code distributed need not include  
anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on) of the  
operating system on which the executable runs, unless that component  
itself accompanies the executable.  
If distribution of executable or object code is made by offering  
access to copy from a designated place, then offering equivalent  
access to copy the source code from the same place counts as  
distribution of the source code, even though third parties are not  
compelled to copy the source along with the object code.  
4.You may not copy, modify, sublicense, or distribute the Program  
except as expressly provided under this License. Any attempt  
otherwise to copy, modify, sublicense or distribute the Program is  
void, and will automatically terminate your rights under this License.  
However, parties who have received copies, or rights, from you under  
this License will not have their licenses terminated so long as such  
parties remain in full compliance.  
5.You are not required to accept this License, since you have not  
signed it. However, nothing else grants you permission to modify or  
distribute the Program or its derivative works. These actions are  
prohibited by law if you do not accept this License. Therefore, by  
modifying or distributing the Program (or any work based on the  
Program), you indicate your acceptance of this License to do so, and  
all its terms and conditions for copying, distributing or modifying  
the Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the  
Program), the recipient automatically receives a license from the  
original licensor to copy, distribute or modify the Program subject to  
these terms and conditions. You may not impose any further  
restrictions on the recipients' exercise of the rights granted herein.  
You are not responsible for enforcing compliance by third parties to  
this License.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. If, as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent issues),  
conditions are imposed on you (whether by court order, agreement or  
otherwise) that contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you cannot  
distribute so as to satisfy simultaneously your obligations under this  
License and any other pertinent obligations, then as a consequence you  
may not distribute the Program at all. For example, if a patent  
license would not permit royalty-free redistribution of the Program by  
all those who receive copies directly or indirectly through you, then  
the only way you could satisfy both it and this License would be to  
refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under  
any particular circumstance, the balance of the section is intended to  
apply and the section as a whole is intended to apply in other  
circumstances.  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of any  
such claims; this section has the sole purpose of protecting the  
integrity of the free software distribution system, which is  
implemented by public license practices. Many people have made  
generous contributions to the wide range of software distributed  
through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing  
to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to  
be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in  
certain countries either by patents or by copyrighted interfaces, the  
original copyright holder who places the Program under this License  
may add an explicit geographical distribution limitation excluding  
those countries, so that distribution is permitted only in or among  
Download from Www.Somanuals.com. All Manuals Search And Download.  
countries not thus excluded. In such case, this License incorporates  
the limitation as if written in the body of this License.  
9.The Free Software Foundation may publish revised and/or new versions  
of the General Public License from time to time. Such new versions will  
be similar in spirit to the present version, but may differ in detail to  
address new problems or concerns.  
Each version is given a distinguishing version number. If the Program  
specifies a version number of this License which applies to it and "any  
later version", you have the option of following the terms and conditions  
either of that version or of any later version published by the Free  
Software Foundation. If the Program does not specify a version number of  
this License, you may choose any version ever published by the Free Software  
Foundation.  
10. If you wish to incorporate parts of the Program into other free  
programs whose distribution conditions are different, write to the author  
to ask for permission. For software which is copyrighted by the Free  
Software Foundation, write to the Free Software Foundation; we sometimes  
make exceptions for this. Our decision will be guided by the two goals  
of preserving the free status of all derivatives of our free software and  
of promoting the sharing and reuse of software generally.  
NO WARRANTY  
11. BECAUSETHE PROGRAM IS LICENSED FREE OF CHARGE,THERE IS  
NO WARRANTY FORTHE PROGRAM,TOTHE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING  
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDETHE  
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. THE ENTIRE RISK ASTOTHE QUALITY AND PERFORMANCE  
OFTHE PROGRAM IS WITHYOU. SHOULDTHE PROGRAM PROVE  
DEFECTIVE,YOU ASSUMETHE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED  
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTETHE PROGRAM AS  
PERMITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OFTHE USE OR INABILITYTO USETHE PROGRAM  
(INCLUDING BUT NOT LIMITEDTO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED BYYOU ORTHIRD  
PARTIES OR A FAILURE OFTHE PROGRAMTO OPERATE WITH ANY  
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS  
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.  
END OFTERMS AND CONDITIONS  
How to ApplyTheseTerms toYour New Programs  
If you develop a new program, and you want it to be of the greatest  
possible use to the public, the best way to achieve this is to make it  
free software which everyone can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest  
to attach them to the start of each source file to most effectively  
convey the exclusion of warranty; and each file should have at least  
the "copyright" line and a pointer to where the full notice is found.  
<one line to give the program's name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This program is free software; you can redistribute it and/or modify  
it under the terms of the GNU General Public License as published by  
the Free Software Foundation; either version 2 of the License, or  
(at your option) any later version.  
This program is distributed in the hope that it will be useful,  
but WITHOUT ANY WARRANTY; without even the implied warranty of  
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the  
GNU General Public License for more details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You should have received a copy of the GNU General Public License  
along with this program; if not, write to the Free Software  
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this  
when it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type  
`show w'.  
This is free software, and you are welcome to redistribute it  
under certain conditions; type `show c' for details.  
The hypothetical commands `show w' and `show c' should show the  
appropriate parts of the General Public License. Of course, the commands you  
use may be called something other than `show w' and `show c'; they could  
even be mouse-clicks or menu items--whatever suits your program.  
You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a "copyright disclaimer" for the program, if  
necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program  
`Gnomovision' (which makes passes at compilers) written by James Hacker.  
<signature ofTy Coon>, 1 April 1989  
Ty Coon, President ofVice  
This General Public License does not permit incorporating your program into  
proprietary programs. If your program is a subroutine library, you may  
consider it more useful to permit linking proprietary applications with the  
library. If this is what you want to do, use the GNU Library General  
Public License instead of this License.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
uClibc r0.9 <http://www.uclibc.org/>, , licensed under LGPLV2,  
LGPLV2  
GNU LIBRARY GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1991 Free Software Foundation, Inc.  
675 Mass Ave, Cambridge, MA 02139, USA  
Everyone is permitted to copy and distribute verbatim copies  
of this license document, but changing it is not allowed.  
[This is the first released version of the library GPL. It is  
numbered 2 because it goes with version 2 of the ordinary GPL.]  
Preamble  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General Public  
Licenses are intended to guarantee your freedom to share and change  
free software--to make sure the software is free for all its users.  
This license, the Library General Public License, applies to some  
specially designated Free Software Foundation software, and to any  
other libraries whose authors decide to use it. You can use it for  
your libraries, too.  
When we speak of free software, we are referring to freedom, not  
price. Our General Public Licenses are designed to make sure that you  
have the freedom to distribute copies of free software (and charge for  
this service if you wish), that you receive source code or can get it  
if you want it, that you can change the software or use pieces of it  
in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid  
Download from Www.Somanuals.com. All Manuals Search And Download.  
anyone to deny you these rights or to ask you to surrender the rights.  
These restrictions translate to certain responsibilities for you if  
you distribute copies of the library, or if you modify it.  
For example, if you distribute copies of the library, whether gratis  
or for a fee, you must give the recipients all the rights that we gave  
you. You must make sure that they, too, receive or can get the source  
code. If you link a program with the library, you must provide  
complete object files to the recipients so that they can relink them  
with the library, after making changes to the library and recompiling  
it. And you must show them these terms so they know their rights.  
Our method of protecting your rights has two steps: (1) copyright  
the library, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the library.  
Also, for each distributor's protection, we want to make certain  
that everyone understands that there is no warranty for this free  
library. If the library is modified by someone else and passed on, we  
want its recipients to know that what they have is not the original  
version, so that any problems introduced by others will not reflect on  
the original authors' reputations.  
Finally, any free program is threatened constantly by software  
patents. We wish to avoid the danger that companies distributing free  
software will individually obtain patent licenses, thus in effect  
transforming the program into proprietary software. To prevent this,  
we have made it clear that any patent must be licensed for everyone's  
free use or not licensed at all.  
Most GNU software, including some libraries, is covered by the ordinary  
GNU General Public License, which was designed for utility programs. This  
license, the GNU Library General Public License, applies to certain  
designated libraries. This license is quite different from the ordinary  
one; be sure to read it in full, and don't assume that anything in it is  
the same as in the ordinary license.  
The reason we have a separate public license for some libraries is that  
Download from Www.Somanuals.com. All Manuals Search And Download.  
they blur the distinction we usually make between modifying or adding to a  
program and simply using it. Linking a program with a library, without  
changing the library, is in some sense simply using the library, and is  
analogous to running a utility program or application program. However, in  
a textual and legal sense, the linked executable is a combined work, a  
derivative of the original library, and the ordinary General Public License  
treats it as such.  
Because of this blurred distinction, using the ordinary General  
Public License for libraries did not effectively promote software  
sharing, because most developers did not use the libraries. We  
concluded that weaker conditions might promote sharing better.  
However, unrestricted linking of non-free programs would deprive the  
users of those programs of all benefit from the free status of the  
libraries themselves. This Library General Public License is intended to  
permit developers of non-free programs to use free libraries, while  
preserving your freedom as a user of such programs to change the free  
libraries that are incorporated in them. (We have not seen how to achieve  
this as regards changes in header files, but we have achieved it as regards  
changes in the actual functions of the Library.) The hope is that this  
will lead to faster development of free libraries.  
The precise terms and conditions for copying, distribution and  
modification follow. Pay close attention to the difference between a  
"work based on the library" and a "work that uses the library". The  
former contains code derived from the library, while the latter only  
works together with the library.  
Note that it is possible for a library to be covered by the ordinary  
General Public License rather than by this special one.  
GNU LIBRARY GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0.This License Agreement applies to any software library which  
contains a notice placed by the copyright holder or other authorized  
Download from Www.Somanuals.com. All Manuals Search And Download.  
party saying it may be distributed under the terms of this Library  
General Public License (also called "this License"). Each licensee is  
addressed as "you".  
A "library" means a collection of software functions and/or data  
prepared so as to be conveniently linked with application programs  
(which use some of those functions and data) to form executables.  
The "Library", below, refers to any such software library or work  
which has been distributed under these terms. A "work based on the  
Library" means either the Library or any derivative work under  
copyright law: that is to say, a work containing the Library or a  
portion of it, either verbatim or with modifications and/or translated  
straightforwardly into another language. (Hereinafter, translation is  
included without limitation in the term "modification".)  
"Source code" for a work means the preferred form of the work for  
making modifications to it. For a library, complete source code means  
all the source code for all modules it contains, plus any associated  
interface definition files, plus the scripts used to control compilation  
and installation of the library.  
Activities other than copying, distribution and modification are not  
covered by this License; they are outside its scope. The act of  
running a program using the Library is not restricted, and output from  
such a program is covered only if its contents constitute a work based  
on the Library (independent of the use of the Library in a tool for  
writing it). Whether that is true depends on what the Library does  
and what the program that uses the Library does.  
1.You may copy and distribute verbatim copies of the Library's  
complete source code as you receive it, in any medium, provided that  
you conspicuously and appropriately publish on each copy an  
appropriate copyright notice and disclaimer of warranty; keep intact  
all the notices that refer to this License and to the absence of any  
warranty; and distribute a copy of this License along with the  
Library.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You may charge a fee for the physical act of transferring a copy,  
and you may at your option offer warranty protection in exchange for a  
fee.  
2.You may modify your copy or copies of the Library or any portion  
of it, thus forming a work based on the Library, and copy and  
distribute such modifications or work under the terms of Section 1  
above, provided that you also meet all of these conditions:  
a)The modified work must itself be a software library.  
b)You must cause the files modified to carry prominent notices  
stating that you changed the files and the date of any change.  
c)You must cause the whole of the work to be licensed at no  
charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a  
table of data to be supplied by an application program that uses  
the facility, other than as an argument passed when the facility  
is invoked, then you must make a good faith effort to ensure that,  
in the event an application does not supply such function or  
table, the facility still operates, and performs whatever part of  
its purpose remains meaningful.  
(For example, a function in a library to compute square roots has  
a purpose that is entirely well-defined independent of the  
application. Therefore, Subsection 2d requires that any  
application-supplied function or table used by this function must  
be optional: if the application does not supply it, the square  
root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the Library,  
and can be reasonably considered independent and separate works in  
themselves, then this License, and its terms, do not apply to those  
sections when you distribute them as separate works. But when you  
distribute the same sections as part of a whole which is a work based  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on the Library, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the  
entire whole, and thus to each and every part regardless of who wrote  
it.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is to  
exercise the right to control the distribution of derivative or  
collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library  
with the Library (or with a work based on the Library) on a volume of  
a storage or distribution medium does not bring the other work under  
the scope of this License.  
3.You may opt to apply the terms of the ordinary GNU General Public  
License instead of this License to a given copy of the Library. To do  
this, you must alter all the notices that refer to this License, so  
that they refer to the ordinary GNU General Public License, version 2,  
instead of to this License. (If a newer version than version 2 of the  
ordinary GNU General Public License has appeared, then you can specify  
that version instead if you wish.) Do not make any other change in  
these notices.  
Once this change is made in a given copy, it is irreversible for  
that copy, so the ordinary GNU General Public License applies to all  
subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of  
the Library into a program that is not a library.  
4.You may copy and distribute the Library (or a portion or  
derivative of it, under Section 2) in object code or executable form  
under the terms of Sections 1 and 2 above provided that you accompany  
it with the complete corresponding machine-readable source code, which  
must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If distribution of object code is made by offering access to copy  
from a designated place, then offering equivalent access to copy the  
source code from the same place satisfies the requirement to  
distribute the source code, even though third parties are not  
compelled to copy the source along with the object code.  
5.A program that contains no derivative of any portion of the  
Library, but is designed to work with the Library by being compiled or  
linked with it, is called a "work that uses the Library". Such a  
work, in isolation, is not a derivative work of the Library, and  
therefore falls outside the scope of this License.  
However, linking a "work that uses the Library" with the Library  
creates an executable that is a derivative of the Library (because it  
contains portions of the Library), rather than a "work that uses the  
library". The executable is therefore covered by this License.  
Section 6 states terms for distribution of such executables.  
When a "work that uses the Library" uses material from a header file  
that is part of the Library, the object code for the work may be a  
derivative work of the Library even though the source code is not.  
Whether this is true is especially significant if the work can be  
linked without the Library, or if the work is itself a library. The  
threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data  
structure layouts and accessors, and small macros and small inline  
functions (ten lines or less in length), then the use of the object  
file is unrestricted, regardless of whether it is legally a derivative  
work. (Executables containing this object code plus portions of the  
Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may  
distribute the object code for the work under the terms of Section 6.  
Any executables containing that work also fall under Section 6,  
whether or not they are linked directly with the Library itself.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.As an exception to the Sections above, you may also compile or  
link a "work that uses the Library" with the Library to produce a  
work containing portions of the Library, and distribute that work  
under terms of your choice, provided that the terms permit  
modification of the work for the customer's own use and reverse  
engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the  
Library is used in it and that the Library and its use are covered by  
this License. You must supply a copy of this License. If the work  
during execution displays copyright notices, you must include the  
copyright notice for the Library among them, as well as a reference  
directing the user to the copy of this License. Also, you must do one  
of these things:  
a) Accompany the work with the complete corresponding  
machine-readable source code for the Library including whatever  
changes were used in the work (which must be distributed under  
Sections 1 and 2 above); and, if the work is an executable linked  
with the Library, with the complete machine-readable "work that  
uses the Library", as object code and/or source code, so that the  
user can modify the Library and then relink to produce a modified  
executable containing the modified Library. (It is understood  
that the user who changes the contents of definitions files in the  
Library will not necessarily be able to recompile the application  
to use the modified definitions.)  
b) Accompany the work with a written offer, valid for at  
least three years, to give the same user the materials  
specified in Subsection 6a, above, for a charge no more  
than the cost of performing this distribution.  
c) If distribution of the work is made by offering access to copy  
from a designated place, offer equivalent access to copy the above  
specified materials from the same place.  
d)Verify that the user has already received a copy of these  
materials or that you have already sent this user a copy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For an executable, the required form of the "work that uses the  
Library" must include any data and utility programs needed for  
reproducing the executable from it. However, as a special exception,  
the source code distributed need not include anything that is normally  
distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating system on  
which the executable runs, unless that component itself accompanies  
the executable.  
It may happen that this requirement contradicts the license  
restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means you cannot  
use both them and the Library together in an executable that you  
distribute.  
7.You may place library facilities that are a work based on the  
Library side-by-side in a single library together with other library  
facilities not covered by this License, and distribute such a combined  
library, provided that the separate distribution of the work based on  
the Library and of the other library facilities is otherwise  
permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work  
based on the Library, uncombined with any other library  
facilities. This must be distributed under the terms of the  
Sections above.  
b) Give prominent notice with the combined library of the fact  
that part of it is a work based on the Library, and explaining  
where to find the accompanying uncombined form of the same work.  
8.You may not copy, modify, sublicense, link with, or distribute  
the Library except as expressly provided under this License. Any  
attempt otherwise to copy, modify, sublicense, link with, or  
distribute the Library is void, and will automatically terminate your  
rights under this License. However, parties who have received copies,  
or rights, from you under this License will not have their licenses  
Download from Www.Somanuals.com. All Manuals Search And Download.  
terminated so long as such parties remain in full compliance.  
9.You are not required to accept this License, since you have not  
signed it. However, nothing else grants you permission to modify or  
distribute the Library or its derivative works. These actions are  
prohibited by law if you do not accept this License. Therefore, by  
modifying or distributing the Library (or any work based on the  
Library), you indicate your acceptance of this License to do so, and  
all its terms and conditions for copying, distributing or modifying  
the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the  
Library), the recipient automatically receives a license from the  
original licensor to copy, distribute, link with or modify the Library  
subject to these terms and conditions. You may not impose any further  
restrictions on the recipients' exercise of the rights granted herein.  
You are not responsible for enforcing compliance by third parties to  
this License.  
11. If, as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent issues),  
conditions are imposed on you (whether by court order, agreement or  
otherwise) that contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you cannot  
distribute so as to satisfy simultaneously your obligations under this  
License and any other pertinent obligations, then as a consequence you  
may not distribute the Library at all. For example, if a patent  
license would not permit royalty-free redistribution of the Library by  
all those who receive copies directly or indirectly through you, then  
the only way you could satisfy both it and this License would be to  
refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any  
particular circumstance, the balance of the section is intended to apply,  
and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of any  
Download from Www.Somanuals.com. All Manuals Search And Download.  
such claims; this section has the sole purpose of protecting the  
integrity of the free software distribution system which is  
implemented by public license practices. Many people have made  
generous contributions to the wide range of software distributed  
through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing  
to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to  
be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in  
certain countries either by patents or by copyrighted interfaces, the  
original copyright holder who places the Library under this License may add  
an explicit geographical distribution limitation excluding those countries,  
so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if  
written in the body of this License.  
13.The Free Software Foundation may publish revised and/or new  
versions of the Library General Public License from time to time.  
Such new versions will be similar in spirit to the present version,  
but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library  
specifies a version number of this License which applies to it and  
"any later version", you have the option of following the terms and  
conditions either of that version or of any later version published by  
the Free Software Foundation. If the Library does not specify a  
license version number, you may choose any version ever published by  
the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free  
programs whose distribution conditions are incompatible with these,  
write to the author to ask for permission. For software which is  
copyrighted by the Free Software Foundation, write to the Free  
Software Foundation; we sometimes make exceptions for this. Our  
Download from Www.Somanuals.com. All Manuals Search And Download.  
decision will be guided by the two goals of preserving the free status  
of all derivatives of our free software and of promoting the sharing  
and reuse of software generally.  
NO WARRANTY  
15. BECAUSETHE LIBRARY IS LICENSED FREE OF CHARGE,THERE IS NO  
WARRANTY FORTHE LIBRARY,TOTHE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITINGTHE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDETHE LIBRARY  
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR  
IMPLIED, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK ASTOTHE QUALITY AND PERFORMANCE OFTHE  
LIBRARY IS WITHYOU. SHOULDTHE LIBRARY PROVE DEFECTIVE,YOU  
ASSUMETHE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED  
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTETHE LIBRARY AS  
PERMITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OFTHE USE OR INABILITYTO USETHE LIBRARY  
(INCLUDING BUT NOT LIMITEDTO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED BYYOU ORTHIRD  
PARTIES OR A FAILURE OFTHE LIBRARYTO OPERATE WITH ANY OTHER  
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.  
END OFTERMS AND CONDITIONS  
Appendix: How to ApplyTheseTerms toYour New Libraries  
If you develop a new library, and you want it to be of the greatest  
possible use to the public, we recommend making it free software that  
everyone can redistribute and change. You can do so by permitting  
redistribution under these terms (or, alternatively, under the terms of the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is  
safest to attach them to the start of each source file to most effectively  
convey the exclusion of warranty; and each file should have at least the  
"copyright" line and a pointer to where the full notice is found.  
<one line to give the library's name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or  
modify it under the terms of the GNU Library General Public  
License as published by the Free Software Foundation; either  
version 2 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful,  
but WITHOUT ANY WARRANTY; without even the implied warranty of  
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the  
GNU Library General Public License for more details.  
You should have received a copy of the GNU Library General Public  
License along with this library; if not, write to the Free  
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a "copyright disclaimer" for the library, if  
necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the  
library `Frob' (a library for tweaking knobs) written by James Random Hacker.  
<signature ofTy Coon>, 1 April 1990  
Ty Coon, President ofVice  
That's all there is to it!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Curl and libcurl 7.19.7 <http://curl.haxx.se/>, licensed under a MIT/X derivate  
license,  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose  
with or without fee is hereby granted, provided that the above copyright  
notice and this permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED "AS IS",WITHOUT WARRANTY OF ANY  
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTOTHE  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OFTHIRD PARTY RIGHTS. IN NO  
EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  
ANY CLAIM, DAMAGES OR OTHER LIABILITY,WHETHER IN AN ACTION  
OF CONTRACT,TORT OR OTHERWISE,ARISING FROM, OUT OF OR IN  
CONNECTION WITHTHE SOFTWARE ORTHE USE OR OTHER  
DEALINGS INTHE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not  
be used in advertising or otherwise to promote the sale, use or other dealings  
in this Software without prior written authorization of the copyright holder.  
OpenSSL 1.0.0 <http://www.openssl.org/>, licensed under both OpenSSL  
License and Original SSLeay license,  
OpenSSL License  
Download from Www.Somanuals.com. All Manuals Search And Download.  
/*  
* Copyright (c) 1998-2008The OpenSSL Project. All rights reserved.  
*
* Redistribution and use in source and binary forms, with or without  
* modification, are permitted provided that the following conditions  
* are met:  
*
* 1. Redistributions of source code must retain the above copyright  
* notice, this list of conditions and the following disclaimer.  
*
* 2. Redistributions in binary form must reproduce the above copyright  
* notice, this list of conditions and the following disclaimer in  
* the documentation and/or other materials provided with the  
* distribution.  
*
* 3.All advertising materials mentioning features or use of this  
* software must display the following acknowledgment:  
* "This product includes software developed by the OpenSSL Project  
* for use in the OpenSSLToolkit. (http://www.openssl.org/)"  
*
* 4.The names "OpenSSLToolkit" and "OpenSSL Project" must not be used to  
* endorse or promote products derived from this software without  
* prior written permission. For written permission, please contact  
* openssl-core@openssl.org.  
*
* 5. Products derived from this software may not be called "OpenSSL"  
* nor may "OpenSSL" appear in their names without prior written  
* permission of the OpenSSL Project.  
*
* 6. Redistributions of any form whatsoever must retain the following  
* acknowledgment:  
* "This product includes software developed by the OpenSSL Project  
* for use in the OpenSSLToolkit (http://www.openssl.org/)"  
*
*THIS SOFTWARE IS PROVIDED BYTHE OpenSSL PROJECT ``AS IS'' AND  
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHALLTHE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITEDTO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,  
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED  
AND ON ANYTHEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT  
LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE)  
ARISING IN ANY WAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN IF  
ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.  
*
*
*This product includes cryptographic software written by EricYoung  
* (eay@cryptsoft.com). This product includes software written byTim  
* Hudson (tjh@cryptsoft.com).  
*
*/  
Original SSLeay License  
/* Copyright (C) 1995-1998 EricYoung (eay@cryptsoft.com)  
* All rights reserved.  
*
*This package is an SSL implementation written  
* by EricYoung (eay@cryptsoft.com).  
*The implementation was written so as to conform with Netscapes SSL.  
*
*This library is free for commercial and non-commercial use as long as  
* the following conditions are aheared to. The following conditions  
* apply to all code found in this distribution, be it the RC4, RSA,  
* lhash, DES, etc., code; not just the SSL code. The SSL documentation  
* included with this distribution is covered by the same copyright terms  
* except that the holder isTim Hudson (tjh@cryptsoft.com).  
*
* Copyright remains EricYoung's, and as such any Copyright notices in  
* the code are not to be removed.  
* If this package is used in a product, EricYoung should be given attribution  
* as the author of the parts of the library used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*This can be in the form of a textual message at program startup or  
* in documentation (online or textual) provided with the package.  
*
* Redistribution and use in source and binary forms, with or without  
* modification, are permitted provided that the following conditions  
* are met:  
* 1. Redistributions of source code must retain the copyright  
* notice, this list of conditions and the following disclaimer.  
* 2. Redistributions in binary form must reproduce the above copyright  
* notice, this list of conditions and the following disclaimer in the  
* documentation and/or other materials provided with the distribution.  
* 3.All advertising materials mentioning features or use of this software  
* must display the following acknowledgement:  
* "This product includes cryptographic software written by  
*
EricYoung (eay@cryptsoft.com)"  
* The word 'cryptographic' can be left out if the rouines from the library  
* being used are not cryptographic related :-).  
* 4. If you include any Windows specific code (or a derivative thereof) from  
* the apps directory (application code) you must include an  
acknowledgement:  
* "This product includes software written byTim Hudson (tjh@cryptsoft.  
com)"  
*
*THIS SOFTWARE IS PROVIDED BY ERICYOUNG ``AS IS'' AND  
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALLTHE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITEDTO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;  
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY  
THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR  
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY  
WAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE  
POSSIBILITY OF SUCH DAMAGE.  
*
*The licence and distribution terms for any publically available version or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* derivative of this code cannot be changed. i.e. this code cannot simply be  
* copied and put under another distribution licence  
* [including the GNU Public Licence.]  
*/  
OggVorbis <http://xiph.org/vorbis/>, licensed as below,  
Copyright (c) 2002, Xiph.org Foundation  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions  
are met:  
- Redistributions of source code must retain the above copyright  
notice, this list of conditions and the following disclaimer.  
- Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
- Neither the name of the Xiph.org Foundation nor the names of its  
contributors may be used to endorse or promote products derived from  
this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BYTHE COPYRIGHT HOLDERS AND  
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALLTHE FOUNDATION OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT NOT LIMITEDTO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF  
LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY  
OF SUCH DAMAGE.  
FLAC <http://flac.sourceforge.net/index.html>, licensed as below,  
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh  
Coalson  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions  
are met:  
- Redistributions of source code must retain the above copyright  
notice, this list of conditions and the following disclaimer.  
- Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
- Neither the name of the Xiph.org Foundation nor the names of its  
contributors may be used to endorse or promote products derived from  
this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BYTHE COPYRIGHT HOLDERS AND  
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALLTHE FOUNDATION OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT NOT LIMITEDTO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF  
LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY  
OF SUCH DAMAGE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
MCi8080_UM_12_EN_wk1102.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentair Swimming Pool Pump SuperFlo User Manual
Phase Technology Speaker SM500i User Manual
Philips Cell Phone 32PFL9632D User Manual
Philips Portable DVD Player MCD139B User Manual
Philips Speaker System MMS316 User Manual
Philips TV Cables MWS2823T User Manual
Powermate Portable Generator PM0601101 User Manual
Premier Mounts Indoor Furnishings PSD D User Manual
Princeton Flat Panel Television LCD 1911 User Manual
Psion Teklogix Car Video System 8515 User Manual