Register your product and get support at
Ultra Slim 4K Ultra HD Smart LED TV
40PUK6809
40PUS6809
40PUS6809
50PUK6809
50PUS6809
50PUS6809
58PUK6809
58PUS6809
58PUS6809
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Apps for watching programmes you missed.
1
If the App gallery does not hold what you are looking for, try
the World Wide Web and surf the Internet on TV.
My new TV
1.1
In
, press
and look up
for more
App gallery
Help
Keywords
information.
Ultra HD TV
1.4
This TV has an
display. Its resolution is four times as
Ultra HD
much as normal HD displays. Ultra HD means 8 million pixels
for the most refined and lifelike picture on TV.
Rental videos
To watch a , you don't need to leave your home.
rental video
On top, the new
continuously
Ultra Pixel HD Engine
Simply rent the latest movie from your regional online
video store.
converts any incoming TV signal into Ultra HD resolution. So
you can enjoy this stunning picture quality the moment you
switch on the TV. Or you can watch native Ultra HD videos
through the HDMI 4 connection. Ultra HD offers TV viewing
that is crisp and sharp even on a big screen.
Start Smart TV and add the video store App to the Smart TV
start page.
Open the video store App, create your personal account, select
the movie and press play.
1.2
No fuss with downloading, you can watch the
movie immediately*.
Smart TV
Connect this
to the Internet and discover
Philips Smart LED TV
In
, press
and look up
for
Rental videos
Help
Keywords
a new world of television. You can make a wired connection to
your router or you can link up wirelessly with Wi-Fi.
more information.
* Depending on the video streaming service of the selected
video store.
With the TV connected to your home network, a smartphone
can show a photo on TV, you can play videos stored on your
computer or control the TV with your tablet.
1.5
With your TV connected to the Internet, you can watch a rental
video from an online video store, read the online TV guide or
record your favourite TV show on a USB Hard Drive.
Social networks
No need to get up to check your friend's messages on your
computer.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
Open Smart TV, select your
page and send a
social network
In
, press
and look up
for more
Smart TV
Help
Keywords
message back from your couch.
information.
1.3
App gallery
Open the
in Smart TV to browse the Apps, the
App gallery
collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an
online photo album, Facebook, Twitter, etc.
Smart TV supports the popular social networks Facebook and
Twitter.
There are Apps to rent a video from an online video store and
4
Download from Www.Somanuals.com. All Manuals Search And Download.
In
, press
and look up
for more
App gallery
Help
Keywords
1.8
information.
Pause TV and recordings
If you connect a
broadcast from a digital TV channel.
, you can pause and record a
USB Hard Drive
1.6
Skype
With
you can make video calls on your TV for free.
Skype™
Pause your TV and answer that urgent phone call or simply take
a break during a sports match, while the TV stores the broadcast
on the USB Hard Drive. You can start watching again later.
With a USB Hard Drive connected, you can also record digital
broadcasts. You can record while you are watching a
programme or schedule a recording of an upcoming
programme.
You can call and see your friends from anywhere in the world.
To make a video call, you need a camera with a built-in
microphone and a good connection to the Internet. Some
Philips TVs have a camera and microphone built in.
In
, press
and look up
for more
Skype
Help
Keywords
In
, press
and look up
or
Pause TV
Help
Keywords
information.
for more information.
Recording
1.7
1.9
Smartphones and tablets
Gaming
To use your smartphone or tablet as a TV remote control or as
your media controller, download the app
Philips MyRemote
from your smartphone or tablet app store.
If you select your game console in the Home menu, the TV
switches to the settings ideal for gaming automatically.
If you play a multi-player game with split screens, you can set the
TV to show each screen as a full screen simultaneously.
Each player can focus on his own game to play.
Operate your TV from your smartphone or tablet, switch
channels or change the volume. With the MyRemote app, you
can use your phone or tablet to send photos, music or videos
from your computer to your TV. And with MyRemote app on a
tablet, you can call up the TV guide, read about the programmes
and switch the TV to a channel with a simple tap of your finger.
The MyRemote app is available for iOS and Android.
The TV uses 3D technology to show both screens. To play a
two-player game with two different full screen pictures, you
need a pair of 3D glasses for each player.
In
, press
and look up
Game console or
Help
Keywords
for more information.
Two player games
In
, press
and look up
for
MyRemote app
Help
Keywords
more information.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.10
EasyLink
With
you can operate a connected device, like a Bluray
EasyLink
Disc player, with the remote control of the TV.
EasyLink uses HDMI CEC to communicate with the connected
devices.
In
, press
and look up
for more
EasyLink
Help
Keywords
information.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
meet safety standards according to the TV's weight. Also read
the safety precautions before positioning the TV.
2
TP Vision Europe B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
Setting up
2.1
2.3
Read safety
Tips on placement
Read the safety instructions first before you use the TV.
In Help, go to
>
.
Safety and care Safety
• Position the TV where light does not shine directly on the
screen.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen
size. When seated, your eyes should be level with the centre of
the screen.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the
Quick Start Guide that came with the TV. In case you lost this
Use the product type number of the TV to look for the Quick
Start Guide to download.
2.4
Wall mounting
Power cable
• Insert the power cable into the
back of the TV.
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the wall mount .
. .
connector on the
POWER
• Make sure the power cable is securely inserted in the
connector.
To fix the bracket securely, use screws with a length indicated in
the drawing.
• Make sure that the power plug, in the wall socket, is accessible
at all times.
• When you unplug the power cable, always pull the plug, never
pull the cable.
• For 6809 series 58-inch TV
VESA MIS-F 400x400, M6
• For 6809 series 50-inch TV
VESA MIS-F 400x200, M6
• For 6809 series 40-inch TV
VESA MIS-F 200x100, M6
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
• For 6719 series 40-inch/48-inch TV
VESA MIS-F 400x200, M6
In
, press
and look up Switching on for more
Keywords
Help
information on switching the TV on or off.
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5
Antenna cable
Insert the antenna plug firmly into the
back of the TV.
socket at the
ANTENNA
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite dish
Attach the satellite F-type connector to the satellite connection
at the back of the TV.
SAT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Scan
3
Select
to scan for your wireless network (your wireless
Scan
router). The TV might find several wireless networks in your
proximity.
Network
3.1
•
WPS
If your router has WPS, you can directly connect to the router
without scanning. Go to the router, press the WPS button and
Wireless network
return to the TV within 2 minutes. Then press
the connection.
to make
Connect
What you need
If you have devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
To connect the TV wirelessly to the Internet, you need a
wireless router. Use a high-speed (broadband) connection to
the Internet..
If you must use the
instead of WPS.
to connect, select
Scan
WPS PIN code
- In the list of networks found, select your wireless
Step 7
network and press
.
OK
If your network is not in the list because the network name is
hidden (you switched off the SSID broadcast of the router),
select
to enter the network name yourself.
Manual entry
- Depending on the type of router, you can now enter
Step 8
your encryption key (WEP, WPA or WPA2). If you entered the
encryption key for this network before, you can select
make the connection immediately.
to
Next
If your router supports WPS or WPS PIN, you select
,
WPS
or
WPS PIN Standard
. Select your choice and press
.
OK
•
Standard
Network devices
Select
to enter the encryption key (password,
Standard
passphrase or security key) manually.You can use the keyboard
on the RC to enter the encryption key. Once you have entered
The TV can connect to other devices in your wireless network,
like your computer or smartphone. You can use a computer
with Microsoft Windows or Apple OS X.
the key, press
.
Connect
•
WPS PIN
To make a secured WPS connection with a PIN code, select
and press . Write down the 8-digit PIN code
File sharing
WPS PIN
shown and enter it in the router software on your PC. Return to
the TV and press . Consult the router manual on where
OK
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
Connect
to enter the PIN code in the router software.
- A message will be shown when the connection is
successful.
Step 9
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to
.
On
Alternatively, if you are an advanced user and want to install
your network with Static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press and select
and press
>
Setup
Make the connection
. Select
>
OK
configuration Static IP
you can set the IP address and other necessary settings in
Network settings Network settings Network
. With Static IP selected in the menu,
Static
>
Follow steps 1 to 5.
in the same menu.
IP configuration
- Make sure that the router of your wireless network is
Step 1
switched on.
- Press and select
and press
and press
.
OK
.
Step 2
Step 3
Step 4
Step 5
Step 6
Setup
OK
- Select
- Select
- Select
- Select
.
Connect to network
OK
and press
and press
Connect
Wireless
.
OK
to scan for your wireless network. If you
Scan
have a router with WPS (Wi-Fi Protected Setup), you can select
. Select your choice and press
.
OK
WPS
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Network problems
Connect the router
To connect and setup the router follow steps to .
Wireless network not found or distorted
1
5
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n
devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV's wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press and select
4 - Select
and press
.
Setup
Connect to network
and press
OK
and press
.
OK
5 - Select
.
OK
Wired
The TV constantly searches for the network connection. A
message will be shown when the connection is successful.
Internet does not work
• If the connection to the router is OK, check the router
connection to the Internet.
Network configuration
If the connection fails, you can check the DHCP setting of the
The PC and Internet connection are slow
router. DHCP should be set to
.
On
Alternatively, if you are an advanced user and want to install
your network with static IP addressing, set the TV to Static IP.
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your
router.
To set the TV to Static IP, press and select
and
Setup
press
.
OK
Select
>
>
Network settings Network settings Network
>
. With Static IP selected in the menu,
configuration Static IP
you can set the IP address and other necessary settings in
Static
3.2
in the same menu.
IP configuration
Wired network
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet
cable.
What you need
You need a network
Use a router with a high-speed (broadband) connection to the
Internet.
to connect the TV to the Internet.
router
3.3
Network settings
To open the Network settings . . .
1 - Press and select
and press
and press
.
OK
Setup
2 - Select
.
Network settings
OK
•
View network settings
All current network settings are shown here. The IP and MAC
address, signal strength, speed, encryption method, etc.
•
Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
File sharing
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
•
Wi-Fi media playback
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
To receive multimedia files from smartphones or tablets, set the
DMR to On.
•
Static IP configuration
If Static IP is selected in Network Settings menu, you can set all
necessary static IP settings here.
In
, press
and look up
Keywords
Help
Media server
for an overview of supported media server
software, supported
software.
•
Wi-Fi Miracast
10
Download from Www.Somanuals.com. All Manuals Search And Download.
For more information on Wi-Fi Miracast,
press and look up
.
Wi-Fi Miracast™
Keywords
•
Reset Wi-Fi Miracast group
Clear the list of connected and blocked devices that are used
with Miracast.
•
Wi-Fi smart screen
For more information on Wi-Fi smart screen,
press
and look up
.
Wi-Fi smart screen
Keywords
•
TV network name
If you have more than one TV in your network, you can rename
the TVs here.
•
Netflix Settings
Adjust Netflix settings.
•
Clear Internet memory
With Clear Internet memory, you can clear all Internet files
stored on your TV. You clear your Philips Smart TV registration
and parental rating settings, your video store app logins, all Smart
TV app favourites, Internet bookmarks and history. Interactive
MHEG applications can also save so-called 'cookies', on your TV.
These files will also be cleared.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. EasyLink HDMI
CEC must be switched On on the TV and the connected
device.
Connections
4.1
For more information on using EasyLink, press
Keywords
Tips on connections
and look up
.
EasyLink CEC
DVI to HDMI
Connectivity guide
Use a DVI to HDMI adapter if your device only has a DVI
connection. Use one of the HDMI connections and add an
Audio L/R cable (mini-jack 3.5mm) to AUDIO IN for sound, on
the back of the TV.
Always connect a device to the TV with the highest quality
connection available. Also, use good quality cables to ensure a
good transfer of picture and sound.
If you need help to connect several devices to the TV, you can
visit the Philips TV connectivity guide. The guide offers
information on how to connect and which cables to use.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM (Digital Rights Management).
Go to
Antenna
HDMI ARC
If you have a Set-top box (a digital receiver) or Recorder,
connect the antenna cables to run the antenna signal through
the Set-top box and/or Recorder first before it enters the TV. In
this way, the antenna and the Set-top box can send possible
additional channels to the Recorder to record.
All of the HDMI connections on the TV have HDMI ARC
(Audio Return Channel).
If the device, typically a Home Theatre Sysytem (HTS), also has
the HDMI ARC connection, connect it to any of the HDMI
connections on this TV. With the HDMI ARC connection, you
do not need to connect the extra audio cable that sends the
sound of the TV picture to the HTS. The HDMI ARC
connection combines both signals.
You can use any HDMI connection on this TV to connect the
HTS but ARC is only available for 1 device/connection at a time.
In case you prefer to switch off ARC on the HDMI connections,
press and select
and press
.
OK
Setup
Select
>
>
>
.
TV settings Sound Advanced HDMI ARC
HDMI Ultra HD
You can watch videos filmed or made in 'native' Ultra HD
resolution - 3840x2160 pixels - on this TV.
HDMI
HDMI CEC
Connect a blu-ray Disc player, game console or computer that
plays Ultra HD videos to an
speed HDMI cable to connect. The HDMI UHD connection can
have ARC (Audio Return Channel) and does not support 3D.
connection. Use a High
HDMI
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) or Ultra HD (UHD) TV
signals. For best signal quality transfer, use a High speed HDMI
cable and do not use an HDMI cable longer than 5 m.
EasyLink HDMI CEC
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality connection. The
YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left and
Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your device,
typically a Home Theatre System (HTS), has no HDMI ARC
connection, you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality connection. Next to
the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press
and look up
Audio
Keywords
.
Out settings
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press
and look up
Audio
Keywords
.
to video sync
• Only for TVs with component/composite connectors.
4.2
EasyLink HDMI CEC
Scart
SCART is a good quality connection. The SCART connection
can be used for CVBS and RGB video signals but cannot be used
for High Definition (HD) TV signals. The SCART connection
combines video and audio signals.
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
Use the SCART adapter cable to connect your device.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Press and select
and press
.
OK
Setup
2 - Select
OK.
>
>
TV settings General settings EasyLink, and press
3 - Select
and press
.
OK
Off
4 - Press , repeatedly if necessary, to close the menu.
EasyLink Remote Control
EasyLink setup
If you want devices to communicate but you don't want to
operate them with the TV remote control, you can switch off
EasyLink remote control separately.
The TV comes with EasyLink switched on. Make sure that all
HDMI CEC settings are properly set up on the connected
EasyLink devices. EasyLink might not work with devices from
other brands.
In the EasyLink settings menu, select
EasyLink remote control
and select
.
Off
Pixel Plus Link
HDMI CEC on other brands
Some devices, a DVD or Blu-ray Disc player, might have their
own picture quality processing. To avoid bad picture quality
caused by interference with the TV processing, the picture
processing of these devices should be disabled. The TV comes
with Pixel Plus Link switched on and disables the picture quality
processing of recent Philips devices connected to the TV.
To switch off Pixel Plus Link, in the EasyLink settings menu,
The HDMI CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Example HDMI CEC branding names are property of their
respective owners.
select
and select
.
Off
Pixel Plus Link
Auto subtitle shift
Operate devices
If you play a DVD or Blu-ray Disc on a Philips disc player that
supports subtitles, the TV can move the subtitles upwards.
Subtitles will be visible whatever Picture format you select. The
TV comes with Auto subtitle shift switched on.
To operate a device connected to HDMI and set up with
EasyLink, select the device - or its activity - in the list of TV
connections. Press
, select a device connected to
SOURCES
an HDMI connection and press
.
OK
To switch off Auto subtitle shift, in the EasyLink settings menu,
select
and select
.
Off
Auto subtitle shift
Auto switch off devices
You can set the TV to switch off the connecting HDMI-CEC
compliant devices if they are not the active source. The TV
switches the connected device to standby after 10 minutes of
inactivity.
Once the device is selected, the TV remote control can control
the device. However and keys and some
other TV keys are not forwarded to the device.
If the key you need is not on the TV remote control, you can
select the key in the Options menu.
OPTIONS
4.3
Common interface - CAM
Press
and select
in the menu bar. On
Controls
OPTIONS
CI+
the screen, select the device key you need and press
.
OK
Some very specific device keys might not be available in the
Controls menu.
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region.
These programmes are scrambled by the TV broadcaster and
descrambled with a prepaid CI+ module.
Note: Only devices that support
EasyLink remote control
function will respond to the TV remote control.
Digital TV broadcasters provide this CI+ module (Conditional
Access Module - CAM) when you subscribe to their premium
programmes. These programmes have a high level of copy
protection.
EasyLink settings
The TV comes with all EasyLink settings switched on. You can
switch off any EasyLink setting independently.
Contact a digital TV broadcaster for more information on terms
& conditions.
EasyLink
For more information on connecting a CAM module, press
To switch off EasyLink completely . . .
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Keywords and look up Common Interface CAM.
connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-top box has
no HDMI connection.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
insertion can damage the CAM and TV.
Switch off timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press and select
and
Setup
press
Select
.
OK
Use the Common Interface slot on the TV to insert the CAM
card.
>
>
and
TV settings General settings Switch off timer
set the slider bar to
.
Off
With the front of the card facing towards you, gently insert the
CAM as far as it will go.
Leave the card in the slot permanently.
4.5
It may take a few minutes before the CAM is activated.
Removing the CAM will deactivate the broadcast service on TV.
If a CAM is inserted and subscription fees are paid, (connection
methods can differ), you can watch the TV broadcast. The
inserted CAM is exclusively for your TV.
Satellite receiver
Connect the dish antenna cable to
•
the Satellite receiver.
CAM settings
To set passwords or PIN codes for the CAM TV broadcast,
press and select
and press
.
Setup
OK
Select
>
.
Channel settings Common Interface
Select the CAM TV broadcaster and press
.
OK
4.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the Set-top box
(a digital receiver) and the TV.
Next to the antenna connection, add an HDMI cable to connect
the device to the TV.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
Next to the antenna connections, add an HDMI cable to
15
Download from Www.Somanuals.com. All Manuals Search And Download.
picture to the Home Theatre System.
Switch off timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you can set a
delay on most Home Theatre Systems with a disc player to
match the sound with the video.
To switch off the Switch off timer, press and select
and
Setup
For more information, press
and look up
Audio
Keywords
press
.
OK
.
to video sync
Select
>
>
and
TV settings General settings Switch off timer
set the slider bar to
.
Off
Audio Out settings
4.6
Audio Out delay
Home Theatre System - HTS
With a Home Theatre System (HTS) connected to the TV, the
picture on TV and the sound from the HTS should be
synchronised.
Connect HTS
Use an HDMI cable to connect a Home Theatre System (HTS)
to the TV. You can connect a Philips Soundbar or an HTS with a
built-in disc player.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video
sync is done automatically synchronised and always correct.
Audio sync delay
HDMI ARC
For some Home Theatre Systems you might need to adjust the
audio sync delay to synchronise the audio to the video. On the
HTS, increase the delay value until there is a match between
picture and sound. A delay value of 180ms may be required.
Read the user manual of the HTS. With a delay value set up on
the HTS, you need to switch off Audio out delay on the TV.
If your Home Theatre System has an HDMI ARC connection,
you can use any HDMI connection on the TV to connect. With
HDMI ARC, you do not need to connect the extra audio cable.
The HDMI ARC connection combines both signals.
All HDMI connections on the TV can offer the Audio Return
Channel (ARC) signal. But once you have connected the Home
Theatre System, the TV can only send the ARC signal to this
HDMI connection.
To switch off the Audio Out delay . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
.
TV settings Sound Advanced Audio out delay
3 - Select
and press
.
OK
Off
4 - Press , repeatedly if necessary, to close the menu.
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can
set the TV to sync the sound. You can set an offset that
compensates for the time necessary for the Home Theatre
System to process the sound of the TV picture. You can set the
value in steps of 5ms. Maximum setting is -60ms. The Audio Out
delay setting should be switched on.
If the Home Theatre System has no HDMI ARC connection,
add an optical audio cable (Toslink) to send the sound of the TV
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To synchronise the sound on the TV . . .
1 - Press and select and press
No sound
.
OK
Setup
If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
2 - Select
>
>
>
.
TV settings Sound Advanced Audio out offset
3 - Use the slider bar to set the sound offset and press
4 - Press , repeatedly if necessary, to close the menu.
.
OK
• Check if you connected the HDMI cable to an
connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
HDMI ARC
• Check if the
Press and select
setting on the TV is switched
.
On
HDMI ARC
Audio Out format
>
>
>
>
Setup TV settings Sound Advanced
.
HDMI ARC
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby
Digital, DTS® or similar, set the Audio out format to
Multichannel. With Multichannel, the TV can send the
4.7
compressed multichannel sound signal from a TV channel or
connected player to the Home Theatre System. If you have a
Home Theatre System without multichannel sound processing,
select Stereo.
Blu-ray Disc player
Use a
cable to connect the Blu-ray Disc
High speed HDMI
player to the TV.
To set the Audio out format . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings Sound Advanced Audio out
.
format
3 - Select
or
Multichannel Stereo
.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out levelling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
For more information on EasyLink, press
and look
Keywords
up
.
EasyLink HDMI CEC
To level the difference in volume . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings Sound Advanced Audio out
4.8
.
levelling
DVD player
3 - If the volume difference is large, select
. If the volume
More
difference is small, select
.
Less
Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted. This noise is heard when the audio
or video file has DTS sound but the Home Theatre System has
no DTS sound processing. You can fix this by setting the
Audio
If the DVD player is connected with HDMI and has EasyLink
CEC, you can operate the player with the TV remote control.
of the TV to
.
Stereo
out format
Press and select
>
>
>
>
Setup TV settings Sound Advanced
.
For more information on EasyLink, press
Audio out format
Keywords
and
look up
.
EasyLink HDMI CEC
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9
Game console
HDMI
For best quality, connect the game console with an High speed
HDMI cable to the TV
CVBS - Audio L R
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
Y Pb Pr - Audio L R
Connect the game console with a component video cable (Y Pb
Pr) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.10
USB Hard Drive
What you need
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
If you connect a USB Hard Drive, you can pause or record a TV
broadcast. The TV broadcast must be a digital broadcast (DVB
broadcast or similar).
CVBS - Audio L R / Scart
To pause
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
To pause a broadcast, you need a USB 2.0 compatible Hard
Drive with a minimum of 32GB disk space.
If your game console only has Video (CVBS) and Audio L/R
output, use a Video Audio L/R to SCART adapter to connect to
the SCART connection.
To record
To pause and record a broadcast, you need a minimum of
250GB disk space.
Note: the CVBS to SCART Adapter is not provided in the TV
set.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV guide
USB keyboard
Before you decide to buy a USB Hard Drive to record, you can
check if it is possible to record digital TV channels in your
country.
Connect a USB keyboard (USB-HID type) to enter text on your
TV.
Press
on the remote control. If there is a Record
TV GUIDE
You can connect a keyboard and a mouse to the TV.
button on the TV guide page, you can record.
Use one of the
connections to connect.
USB
For more information on how to install a USB Hard Drive, press
Keywords and look up USB Hard Drive, installation.
Installation
Before you can pause or record a broadcast, you must connect
and format a USB Hard Drive. If you want to record a broadcast
with TV guide data from the Internet, you need to have the
Internet connection installed on your TV before you install the
USB Hard Drive. Formatting removes all files from the USB
Hard Drive.
Install the keyboard
To install the USB keyboard, switch on the TV and connect the
USB keyboard to one of the connections on the TV. When
the TV detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you select a
Cyrillic or Greek keyboard lay-out first, you can select a
secondary Latin keyboard lay-out.
USB
1 - Connect the USB Hard Drive to one of the
USB
connections on the TV. Do not connect another USB device to
the other USB ports when formatting.
To change the keyboard lay-out setting when a lay-out was
selected…
1 - Press and select
and press
.
OK
Setup
>
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting.
2 - Select
>
TV settings General settings USB keyboard
and press
.
OK
settings
Keys for channel renaming
• Enter key = OK
Follow the instructions on screen.
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard lay-outs, if a secondary lay-out is
When the USB Hard Drive is formatted, leave it connected
permanently.
set, press the
keys simultaneously.
Ctrl + Shift
Warning
Keys for Smart TV Apps and Internet pages
• Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
The USB Hard Drive is formatted exclusively for this TV, you
cannot use the stored recordings on another TV or PC. Do not
copy or change recording files on the USB Hard Drive with any
PC application. This will corrupt your recordings. When you
format another USB Hard Drive, the content on the former will
be lost. A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
For more information, press
and look up
Pause
Keywords
• * = fit the web page to the screen width.
or
.
TV Recording
USB mouse
4.11
Connect USB mouse
USB keyboard or mouse
You can connect a USB mouse (USB-HID type) to navigate
pages on the Internet.
On an Internet page, you can select and click on links more
easily.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop watching the USB flash drive content, press
or
EXIT
select another activity.
To disconnect the USB flash drive, you can pull out the flash
drive anytime.
For more information on watching or playing content from a
USB flash drive, press
and look up
Your photos,
Keywords
.
videos and music
4.13
Connect the mouse
Switch the TV on and connect the USB mouse to one of the
Photo camera
connections on the TV. You can also connect the USB
USB
To view photos stored on your digital photo camera, you can
connect the camera directly to the TV.
mouse to a connected USB keyboard.
Mouse clicks
Use one of the
connections on the TV to connect. Switch
USB
• Left click =
OK
on the camera after you made the connection.
• Right click =
Back
You can use the scroll wheel to scroll pages up and down.
For more information on how to connect a keyboard,
press
and look up
.
USB keyboard
Keywords
Mouse speed
You can adjust the speed of the mouse moving on screen.
To adjust the speed . . .
If the contents list does not appear automatically, press
, select
and press
.
OK
SOURCE
USB
1 - Press and select
and press
.
OK
Setup
Your camera might need to be set to transfer its content with
PTP (Picture Transfer Protocol). Read the user manual of the
digital photo camera.
2 - Select
3 - Select
and press
.
TV settings
OK
and
General settings Pointer / Mouse settings
>
press
.
OK
4 - Press the arrows (up) or (down) to increase or lower
the speed.
For more information on viewing photos, press
and look up
.
Your photos, videos and music
Keywords
5 - Press
to store and close the setting.
OK
Ultra HD on USB
6 - Press , repeatedly if necessary, to close the menu.
You can view photos in Ultra HD resolution from a connected
USB device or flash drive. The TV will downscale the resolution
to Ultra HD if the resolution of the photo is higher. You cannot
play a native Ultra HD video on any of the USB connections.
4.12
USB flash drive
You can view photos or play your music and videos from a
connected USB flash drive.
Insert a USB flash drive in one of the
TV while the TV is switched on.
connections on the
USB
4.14
Camcorder
HDMI
For best quality, use an HDMI cable to connect the camcorder
to the TV.
The TV detects the flash drive and opens a list showing its
content.
If the contents list does not appear automatically, press
, select
and press
.
OK
SOURCE
USB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4.15
Computer
Connect
You can connect your computer to the TV and use the TV as a
PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to connect
your camcorder. If your camcorder only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART adapter to
connect to the SCART connection.
Note: the CVBS to Scart Adaptor is not provided in the TV set.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect
the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to
AUDIO IN L/R on the back of the TV.
CVBS - Audio L R
Use a Video Audio L/R cable to connect the camcorder to the
TV.
Settings
Ideal monitor setting
If your computer is added as a Computer type of device in the
Source menu (the list of connections), the TV is set to the ideal
Computer setting automatically.
If you use your computer to watch movies or use it to play
games, you might want to set the TV back to the ideal TV
watching or gaming setting.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
To set the TV to the ideal setting manually . . .
1 - Press and select
and press
OK.
Setup
2 - Select
>
>
>
TV settings Picture Advanced Activity
and press
.
style
OK
3 - Select
(for gaming) or select
(for watching
Computer
Game
21
Download from Www.Somanuals.com. All Manuals Search And Download.
a movie) and press
.
OK
4 - Press , repeatedly if necessary, to close the menu.
Remember to set the Game or computer setting back
to
when you stop playing the game.
Computer
4.16
Headphones
You can connect a set of headphones to the connection on
the TV. The connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume . . .
1 - Press and select
and press
Setup
>
OK.
and
TV settings Sound Headphones volume
2 - Select
press
>
.
OK
3 - Press (up) or (down) to adjust the volume.
4 - Press , repeatedly if necessay, to close the menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press the Joystick to confirm a selection or setting.
5
Switch on
5.1
On or Standby
Make sure you plugged in the mains power on the back of the
TV before you switch on the TV.
If the red indicator light is off, press the Joystick on the right side
or on the back of the TV to put the TV in standby - the red
indicator will light up.
With the TV in standby, press onon the remote control to
switch the TV on.
Switch to standby
To switch the TV to standby, press on the remote control.
Switch Off
To switch the TV Off, press the Joystick on the right or on the
back. The red indicator light is off. The TV is still connected to
the mains power but consumes a minimum of energy.
To switch off the TV completely, disconnect the power plug.
When disconnecting the power plug, always pull the power plug,
never the cord. Ensure that you have full access to the power
plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display
the menu.
• Use the arrow/nevigation keys to nevigate up, down, left or
right.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Remote control
6.1
Key overview
Top
-
1
SMART TV
To open the Smart TV start page.
-
2 Colour keys
Follow on screen instructions. Blue key , opens Help.
-
3
INFO
To open or close programme info.
-
4
BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
-
/
1
Standby On
To switch the TV On or back to Standby.
-
keys
2 Playback and record
-
5
HOME
• Play , to playback.
To open or close the home menu.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to record now
-
6
EXIT
To switch back to watching TV.
-
7
OPTIONS
To open or close the Options menu.
-
3
Settings
-
key
8 OK
To open the Settings menu.
To confirm a selection or setting.
-
4
TV GUIDE
-
keys
9 Arrow / navigation
To open or close the TV guide.
To navigate up, down, left or right.
-
5
SEARCH
-
10
MULTIVIEW
To open the Popular searches page.
To open an extra small screen.
-
6
Picture format
To open or close the Picture format menu.
-
7
SOURCES
Bottom
To open or close the Sources menu - the list of connected
devices.
-
8
LIST
To open or close the channel list
Middle
-
1
Volume
To adjust the volume level.
-
and
text keypad
2 Number keys
To select a TV channel directly or to enter text.
-
3 SUBTITLE
To switch subtitles on, off or Automatic.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
-
4
Mute
6.4
To mute the sound or to restore it.
Cleaning
5 -
Channel
To switch to the next or previous channel in the channel list.
To open the next or previous page in Text or start the next or
previous chapter on a disc.
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
-
6 TEXT
To open or close Text / Teletext.
6.2
IR sensor for non-RF remote
control
The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
6.3
Batteries
1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2 type
AAA-R03-1.5V
batteries. Make sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, press
and look up
End of
Keywords
.
use
25
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Channel list
TV channels
7.1
Favourite channels
You can create a favourite channel list that only holds the
channels you want to watch. With the Favourite channel list
selected, you will only see your favourite channels when you
switch through channels.
Watching TV channels
Switch channels
Create your favourite channel list
1 - While watching a TV channel, press
channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to the Favourites
list.
to open the
LIST
To watch TV channels, press . The TV tunes to the TV
channel you last watched.
Alternatively, press to open the Home menu and select
and press
.
OK
Watch TV
To remove a channel from the favourites list, select the channel
with , then press again to unmark as favourite.
Reorder
You can reorder — reposition — channels in the Favourite
channel list.
1 - In the channel list
to reposition.
2 - Press .
, highlight the channel you want
Favourites
To switch channels, press or . If you know the channel
+
-
number, type in the number with the number keys. Press
after you entered the number to switch channels.
OK
3 - Select the channel to reorder and press
.
OK
To switch back to the previously tuned channel, press .
4 - Press the
to move the highlighted
Navigation buttons
channel to another location and press
.
OK
To switch to a channel from a channel list
5 - Once complete, press
to exit from the Favourite
EXIT
channel list.
While watching a TV channel, press
to open the
LIST
channel lists.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and radio
channels.
Next to the channel list , which holds all installed channels,
All
you can set up a list of
, view the
Favourites
The channel list can have several pages with channels. To view
the next or previous page, press or .
To close the channel lists without switching channels, press
installed
stations separately or discover the newly added
Radio
+
-
channels in
.
New
LIST again.
Channel logos
Radio channels
In some countries, the TV can show the channel logos. If you do
not want these logos to appear, you can switch them off.
To switch off Channel logos . . .
If digital broadcasting is available, digital radio stations are
installed during installation. Switch to a radio channel just like you
switch to a TV channel.
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
and
TV settings General settings Channel logos
press
.
OK
3 - Select
and press
.
OK
Off
4 - Press , repeatedly if necessary, to close the menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Some digital broadcasters have age rated their programmes.
When the age rating of a programme is equal to or higher than
the age you have set as age rating for your child, the programme
will be locked.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of the channel
lists.
2 - Select the channel to rename.
3 - Press .
To set an age rating . . .
You can enter text with the remote control keyboard or open
the on-screen keyboard.
1 - Press and select
and press
>
.
OK
>
Setup
2 - Select
and
Channel settings Child lock Parental rating
press
OK.
With the on-screen keyboard
3 - Enter a 4-digit Child lock code and confirm. Now you can set
an age rating.
• To open the on-screen keyboard, place the cursor in the
name text field and press
.
OK
4 - Set the age and press
.
OK
• To delete the character in front of the cursor, press
5 - Press , repeatedly if necessary, to close the menu.
.
Backspace
• To enter a character, select the character with the arrow keys
and press
To switch off the parental age rating, select as age setting.
None
.
OK
The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes
with a higher rating.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press to close the on-screen
keyboard.
Set or change the lock code
• To finish renaming, select
and press
.
OK
Done
To set the lock code or to change the current code . . .
With the remote control keyboard*
• To delete a character, position the cursor behind the character
and press .
• To enter a character, press the character on the keyboard.
• When you are ready, press
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
and
Channel settings Child lock Change code
press
.
OK
3 - If a code is set already, enter the current Child lock code and
then enter the new code twice.
to select
.
OK
Done
Press
again to finish renaming.
OK
The new code is set.
For more information on using the keyboard,
press
and look up
.
Remote control, keyboard
Keywords
Forgotten your Child lock code?
* Only for the remote control with keyboard
If you forgot your code, you can override the current code and
enter a new code.
Lock a channel
1 - Press and select Setup and press OK.
2 - Select Channel settings >
>
and
Child lock Change code
To prevent children from watching a channel or a programme,
you can lock channels or lock age rated programmes.
press
.
OK
3 - Enter the overriding code
.
8888
4 - Now enter a new Child lock code and enter it again to
confirm.
Lock a channel
You can lock a channel to prevent children from watching it. To
watch a locked channel you need to enter the Child lock code.
You cannot lock programmes from connected devices.
Options for channels
To lock a channel . . .
While watching a channel, depending on the type of channel
(analogue or digital) you are watching or depending on the TV
settings you made, some options are available.
1 - While watching a TV channel, press
to open the
LIST
.
Channel list
2 - In any list, select the channel you want to lock.
3 - Press and select . In a channel
OPTIONS
Lock channel
Open the options menu
list, a locked channel is marked with a lock .
While watching a channel, press
.
OPTIONS
To unlock a channel, select the locked channel in the channel list.
Press and select Unlock channel. You will need
OPTIONS
to enter the Child lock code.
Parental rating
To prevent children from watching a programme not suitable for
their age, you can use an age rating.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Select
to view technical information on the channel (if it is
Status
analogue or digital) or a connected device you are watching.
Share
Enables the user to communicate his activity with his social
networks (such as Twitter, facebook or email).
Picture format
Universal access
If black bars appear on top and bottom or on both sides of the
picture, you can adjust the picture format to a format that fills
the screen.
With Universal access switched on, you can set some options
for hearing impaired and visually impaired people.
For more information, press
and look up
Keywords
To change the picture format . . .
.
Universal access
1 - While watching a TV channel, press to open the
Picture
Video selection
menu.
format
Digital TV channels can offer multi video signals (multi-feed
broadcast), different camera viewpoints or angles of the same
event or different programmes on one TV channel. The TV
shows a message if any such TV channels are available.
2 - Select a format from the list and press
.
OK
The following format can be available according the picture on
screen . . .
•
Basic
Subtitles
- Fill screen
- Fit to screen
Switch
Automatic
.
or
with this options. Select
Subtitles on Subtitles off
to show subtitles only when the sound is muted with
•
Advanced
Subtitle language
- Last setting
- Shift
- Zoom
- Stretch
- Native
- Undo
For digital broadcast, you can select an available subtitle language
temporarily if none of your preferred languages are available.
For more information, press
and look up
Keywords
.
Subtitles
Audio languages
For digital broadcast, you can select an available audio language
temporarily if none of your preferred languages are available.
Text / Teletext
For more information, press
and look up
Audio
Keywords
.
languages
Text pages
Dual I-II
To open Text (Teletext) while you are watching TV channels,
press
.
TEXT
If an audio signal contains two audio languages but one language
— or both — has no language indication, this option is available.
To close Text, press TEXT again.
Common interface
If prepaid premium content is available from a CAM, you can set
the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that offers
HbbTV.
For more information, press
and look up
.
HbbTV
Keywords
Select a Text page
MHP applications
To select a page . . .
Enable or disable the MHP applications.
For more information, press
and look up
.
MHP
Keywords
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
Status
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Press a colour key to select a colour-coded subject at the
bottom of the screen.
Menu language
To change the language or the TV menus and messages . . .
Text sub-pages
1 - Press and select
and press
.
OK
Setup
>
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
To select a subpage, press or .
2 - Select
>
and
TV settings General settings Menu language
press
.
OK
3 - Select the language you want and press
4 - Press , repeatedly if necessary, to close the menu.
.
OK
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press
and select
.
T.O.P. overview
OPTIONS
Audio languages
If the TV channel broadcasts multiple or dual audio languages,
you can select your preferred audio language.
Text options
1 - While you watch TV, press
.
OPTIONS
In Text, press
to select the following . . .
OPTIONS
2 - For digital channels, select
. For analogue
Audio language
channels, select
selection.
3 - Select from the available languages, then press
. Press
to confirm your
OK
Alternate audio
•
Freeze page
To stop the automatic rotation of subpages.
•
.
OK
Dual screen / Full screen
To show the TV channel and Text alongside each other.
Note:
If you have selected
select between:
•
T.O.P. overview
for analogue channels,
Alternate audio
To open T.O.P. Text.
•
Enlarge
•
•
: Primary audio language or
: Secondary audio language
Main
SAP
To enlarge the Text page for comfortable reading.
•
Reveal
To unhide hidden information on a page.
•
Cycle subpages
To cycle subpages when these are available
.
Subtitles and languages
•
Language
To switch the group of characters that Text uses to display
correctly.
Subtitles
•
Text 2.5
Switch subtitles on
To activate the Text 2.5 for more colours and better graphics.
To open the Subtitle menu, press
.
SUBTITLE
You can set subtitles to
,
or
.
On Off Automatic
To show subtitles when the broadcasted programme is not in
your language — the language you set for the TV, select
Text setup
. Also, this setting will show subtitles when you mute
the sound with .
Automatic
Text language
For analogue channels, subtitles must be made available in
.
Text
Some digital TV broadcasters have several Text languages
available.
To set your primary and secondary Text language . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
.
Channel settings Language
3 - Select
or
.
Primary Teletext Secondary Teletext
4 - Select your preferred Text languages.
5 - Press , repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics.
Text 2.5 is activated as a standard factory setting.
To switch off Text 2.5 . . .
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels.
Digital channels can offer several subtitle languages for a
programme. You can set a preferred primary and secondary
subtitle language. If subtitles in one of these languages are
available, the TV will show them.
1 - Press
.
TEXT
2 - While watching the teletext, press
.
OPTIONS
3 - Select
>
.
Text 2.5 Off
4 - Press , repeatedly if necessary, to close the menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
If none of the preferred subtitle languages are available, you can
select another subtitle language which is available.
Menu language
To change the language or the TV menus and messages . . .
To set the primary and secondary subtitle language . . .
1 - Press and select
and press
.
OK
Setup
>
1 - Press and select
and press
and select
.
Setup
OK
Languages Primary
and press
2 - Select
>
and
TV settings General settings Menu language
2 - Select
>
Channel settings
or
press
.
OK
subtitles language Secondary subtitles language
3 - Select the language you want and press
4 - Press , repeatedly if necessary, to close the menu.
.
OK
.
OK
3 - Select a language and press
.
OK
4 - Press , repeatedly if necessary, to close the menu.
To select a subtitle language when none of your preferred
languages are available . . .
Interactive TV
1 - Press
2 - Select
.
OPTIONS
Subtitle language
temporarily and press
About iTV
and select a language you want
.
OK
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
On some pages, you can respond to a programme or vote, do
online shopping or pay for a video-on-demand programme.
Subtitles for analogue channels
For analogue channels, you need to make the subtitles available
for each channel manually.
HbbTV, MHEG, . . .
1 - Switch to a channel and press
to open Text.
TEXT
2 - Enter the page number for subtitles, usually
.
888
Broadcasters use various interactive TV systems : HbbTV
(Hybrid Broadcast Broadband TV) or iTV (Interactive TV -
MHEG). Interactive TV is sometimes referred to as Digital Text
or Red button. But each system is distinct.
3 - Press
again, to close Text.
TEXT
If you select On in the Subtitle menu when watching this
analogue channel, subtitles will be shown if available.
To know if a channel is analogue or digital, switch to the channel
Visit the broadcaster's Internet website for more information.
and open
in the
menu.
Options
Status
What you need
Audio languages
Interactive TV is only available on digital TV channels. To enjoy
the full benefits of Interactive TV, you need a high-speed
(broadband) Internet connection to the TV.
Digital TV channels can broadcast audio with several spoken
languages for a programme. You can set a preferred primary and
secondary audio language. If audio in one of these languages is
available, the TV will switch to this audio.
If none of the preferred audio languages is available, you can
select another audio language which is available.
HbbTV
If a TV channel offers HbbTV pages, you must first switch on
HbbTV in the TV settings to view the pages.
To set the primary and secondary audio language . . .
1 - Press and select
and press
and select
.
Setup
OK
and
General settings HbbTV
1 - Press and select
and press
and select
.
Setup
OK
Languages Primary
and press
2 - Select
>
TV settings
2 - Select
>
Channel settings
press
.
OK
or
.
OK
audio language Secondary audio language
3 - Select
and press
.
OK
On
3 - Select a language and press
.
OK
4 - Press , repeatedly if necessary, to close the menu.
4 - Press , repeatedly if necessary, to close the menu.
If you want to avoid access to HbbTV pages on a specific
To select an audio language when none of your preferred audio
language is available . . .
channel, you can block the HbbTV pages for this channel only.
1 - Tune to the channel of which you want to block the HbbTV
pages.
1 - Press
.
OPTIONS
2 - Select
and select an audio language you want
Audio language
2 - Press
and select
and
HBB TV on this channel
OPTIONS
and press
temporarily and press
.
OK
press
.
OK
3 - Select
.
OK
Off
Audio languages for the hearing and visually impaired
Some digital TV channels broadcast special audio and subtitles
adapted for people who are hearing or visually impaired.
Use iTV
For more information, press
and look up
Keywords
Universal access.
Open iTV pages
Most channels that offer HbbTV or iTV invite you to press the
30
Download from Www.Somanuals.com. All Manuals Search And Download.
key or OK key to open their interactive programme.
Off.
To switch off the Automatic channel update . . .
Navigate iTV pages
1 - Press and select
and press
.
OK
.
Setup
You can use the arrow and colour keys, the number keys and
the key to navigate the iTV pages.
You can use the (Play), (Pause) and (Stop) keys to watch
videos within iTV pages.
2 - Select
and press
Channel settings
OK
3 - Select
>
>
Channel installation Automatic channel update
and press
.
OK
Off
Start an update
To start an update yourself . . .
Digital Text (UK only)
To open Digital Text, press
. To close, press .
TEXT
1 - Press and select
and press
.
Setup
OK
Close iTV pages
2 - Select
and press
.
OK
Search for channels
3 - Select
and follow the instructions on
Update channels
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV channel
and switch back.
screen. The update may take a few minutes.
In certain countries, the Automatic channel update is done while
watching TV or any moment when the TV is in standby.
About interactive TV
Reinstall channels
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
You can search for and reinstall channels and leave all other TV
settings untouched. Alternatively, you can do a full new TV
installation.
Note:
• You cannot download files to your TV with this feature.
• Not all TV programmes, commercials and features include
closed captioning information.
If a child lock code is set, you will need to enter this code before
you can reinstall channels.
• You cannot respond to the digital content.
Reinstall channels
Visit the broadcaster's Internet website for more information.
To reinstall the channels only . . .
1 - Press and select
and press
.
Setup
OK
2 - Select
>
and press
Search for channels Re-install channels
.
OK
3 - Select the country where you install the TV.
4 - Select or
7.2
. The channel
Antenna (DVB-T) Cable (DVB-C)
search may take a few minutes. Follow the instructions on
screen.
Channel installation
Full installation
Update channels
To redo a full TV installation . . .
Automatic update
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
and
TV settings General settings Reinstall TV
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
press
. The installation may take a few minutes. Follow the
OK
instructions on screen.
Factory settings
Automatic channel update
Factory settings sets the TV back to the original TV settings for
picture and sound. To switch back to the original Factory
settings . . .
Once a day, at 6 AM, the TV updates the channels and stores
new channels. New channels are stored in the All channels list
but also in the New channels list. Empty channels are removed.
If new channels are found or if channels are updated or
removed, a message is shown at TV start up. The TV must be in
standby to automatically update channels.
1 - Press and select
2 - Select
and press
.
OK
Setup
>
>
TV settings General settings Factory
and press
.
settings
OK
3 - Press
to confirm.
OK
To switch off the message at start up . . .
4 - Press , repeatedly if necessary, to close the menu.
1 - Press and select
and press
.
OK
Setup
2 - Select
and press
.
Channel settings
OK
3 - Select
>
>
Channel installation Channel update message
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
Channel list copy
Introduction
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting,
Channel list copy is intended for dealers and expert users. In
some countries, Channel list copy is only available for copying
satellite channels.
press and select
and press
. Select
Search for
Setup
channels Re-install channels
later to leave the Search for channels.)
OK
>
and press
. Press and
OK
Cancel
If the country is correct continue with step 2.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press and select and press
With
, you can copy the channels installed on
Channel list copy
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
by uploading a predefined channel list on a TV. Use a USB flash
drive of minimum 1 GB.
.
OK
Setup
Select
>
>
>
.
TV settings General settings Reinstall TV OK
Select the correct country and skip the Search for channels.
Finish the installation. When done, continue with step 2.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
3 - To start the channel list upload, press and
select
and press
.
OK
Setup
4 - Select
>
>
>
TV settings General settings Channel list copy
• Both TVs have compatible software versions.
and press
. You might be asked to enter the
OK
Copy to TV
Current version
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
You can check the current version of the TV software
successfully. Unplug the USB memory device.
with
in >
>
.
Current software info
Setup Software settings
Copy channel list
DVB-T or DVB-C
To copy a channel list . . .
DVB-T or DVB-C reception
1 - Switch on the TV which has its channels installed. Plug in a
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you have selected one or the other during the channel
installation.
USB memory device.
2 - Press and select
and press
.
OK
Setup
>
3 - Select
>
>
TV settings General settings Channel list copy
and press
. To copy the channel list from this
OK
Copy to USB
TV, you might be asked to enter the Child lock code you
entered during the installation.
4 - When copying is done, unplug the USB memory device.
If you want to change the DVB setting to start a new channel
installation . . .
1 - Press and select
and press
.
OK
Setup
Now you can upload the copied channel list onto another
Philips TV.
2 - Select
and press
.
Channel settings
OK
3 - Select
>
>
Channel installation Antenna connection
or
and press
.
OK
Antenna (DVB-T) Cable (DVB-C)
4 - Select the DVB setting you want.
Upload channel list
5 - Press , repeatedly if necessary, to close the menu.
DVB-C channel installation
Upload a copied channel list
For ease of use, all DVB-C settings are set to automatic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
It might be necessary to adjust the scanning (full or quick scan)
1 - Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
or enter a specific symbol rate in the
menu while
Settings
installing. To set a
, first set the Symbol rate to
Symbol rate
.
Manual
Channel number conflicts
3 - To start the channel list upload, press and
In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV shows
the list with channel number conflicts. You need to select which
select
and press
.
OK
Setup
4 - Select
>
>
>
TV settings General settings Channel list copy
and press
. You might be asked to enter the
OK
Copy to TV
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel you want to install on a channel number with
multiple TV channels.
Network frequency
With the
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
set to
, you can
Manual
Network frequency mode
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
Frequency scan
input signal on the
connection on the back of the TV
Antenna
Select the method of searching for channels. You can select the
and set the TV in the appropriate system to view the installed
channels on TV.
faster
method and use the predefined settings used
Quick scan
by most cable providers in your country.
To select the DVB-T or DVB-C setting, see above.
If this results in having no channels installed or if some channels
are missing, you can select the extended
method will take more time to search for and install channels.
method. This
Full scan
DVB settings
Access DVB settings
Digital channels
1 - Press and select
and press OK.
Setup
2 - Select
3 - Select
and press OK.
Search for channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
.
Re-install Channels
4 - Select the country where you install this TV.
Select
.
Off
5 - Select
6 - Select
C settings
.
Cable (DVB-C)
, or select
Start to search channels
Settings for DVB-
.
Analogue channels
7 - Press , repeatedly if necessary, to close the menu.
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Symbol rate mode
.
Off
If your cable provider did not give you a specific
symbol rate
value to install the TV channels, leave the
Symbol rate mode
Free / Scrambled
setting on
.
Automatic
If you have a subscription and a CAM - Conditional Access
If you received a specific symbol rate value, select
.
Manual
Module for pay TV services, select
. If you did
However, the value you received could be in the predefined list
Free + scrambled
not subscribe to pay TV channels or services, you can select
only.
of symbol rates already. Select
to
Predefined symbol rates
check if your value is available automatically.
Free channels
For more information, press
and look up
Keywords
CAM -
.
Conditional Access Module
Symbol rate
With the
set to
, you can enter the
Manual
Symbol rate mode
Reception quality
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
Network frequency mode
To check the reception quality of a digital channel . . .
If you intend to use the fast
method in
Quick scan
Frequency
. The TV will use 1
Automatic
- Tune to the channel.
1
2
3
to search for channels, select
scan
- Press and select
and press
.
Setup
OK
Channel settings Channel installation Digital :
and press
of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.
- Select
>
>
.
OK
reception test
If you received a specific network frequency value to search for
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
channels, select
.
Manual
quality of this frequency again, select
and press
.
OK
Search
To enter a specific digital frequency yourself, use the remote
33
Download from Www.Somanuals.com. All Manuals Search And Download.
control digit keys. Alternatively, select the frequency, position the
arrows on a number with and and change the number with
and . To check the frequency, select Search and press OK.
If you use DVB-C to receive channels, the option
Symbol rate
available. For Symbol rate mode, select
,
Automatic
mode is
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Press and select
and press
.
Setup
OK
2 - Select
>
>
Channel settings Channel installation Analogue :
and press
.
Manual installation
OK
•
System
To set up the TV system, select
and press
.
OK
System
Select your country or the part of the world where you are
now.
•
Search channel
To find a channel, select Search channel and press
. Select
OK
. You can also enter a frequency yourself. If
OK
and press
Search
the reception is poor, press
again. If you want to store
Search
and press
the channel, select
.
Done
OK
•
Fine tune
To fine tune a channel, select
and press
. You can
Fine tune
OK
fine tune the channel with or .
If you want to store the channel found, select
and press
Done
.
OK
•
Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select
or .
Store current channel Store as new channel
You can redo these steps until you have found all available
analogue TV channels.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Tune from the channel list
Satellite channels
8.1
To tune to a channel from the channel list . . .
1 - In the channel list, select or in the menu bar to select
the TV or Satellite channel list.
2 - Select a list.
3 - Select a channel in any of the lists and press
tune to the selected channel.
Watching satellite channels
To watch satellite channels . . .
. The TV will
OK
Press and select
and press
. The TV tunes to the
OK
Satellite
satellite channel you last watched.
Channel list options
Change channel
To change channels, press or . The TV will tune to
+
To view the channel list options on the current channel . . .
the next channel in the selected channel list. If you know the
channel number, you can use the number keys on the remote
control. To change back to the previously tuned channel, press
.
1 - With the All channels list on screen, select a channel and
press
.
OPTIONS
2 - Select the option you want and press
.
OK
Available options for satellite channels . . .
You can also tune to a channel directly from the Satellite
channel list.
•
Satellite
Filter the channel list to only show the channels of a specific
satellite or show the channels of all satellites.
8.2
•
Free/Scrambled
Filter the channel list to only show the free-to-air channels, only
the scrambled channels or both. Scrambled channels are marked
with a key .
Satellite channel list
About the channel list
•
Lock channel
You can lock a channel. First select a channel in the list,
press and select . You will have to
When the satellite installation is completed, all satellite channels
are put in the channel list. You can view the list of all channels or
filter the list down to show the favourite channels only or the
radio stations only. Or, after a channel update, you can find the
newly added channels in the list of new channels.
OPTIONS
Lock channel
enter the 4-digit child lock code. A locked channel is marked
with a lock .
•
Unlock channel
To unlock a locked channel. Select a locked channel in the list,
press and and select . You will
OPTIONS
Unlock channel
From any list, you can directly tune to a channel. The list you
select in the channel list, determines the channels you tune to
have to enter the 4-digit child lock code.
with the and keys.
+
You can only reorder channels in the list of favourite channels.
Channel list copy
is intended for dealers and expert users. With
Channel list copy
Select a list filter
Channel list copy, you can copy the channels installed on one TV
onto another Philips TV of the same range. Channel list copy will
copy both terrestrial and satellite channels.
The list you select in the channel list, determines the channels
you tune to with the and keys.
+
For more information, press
and look up
Channel
Keywords
To select a channel list . . .
.
list copy
1 - Press and select
and press
.
OK
Satellite
2 - Press
to open the channel list. The list appears with
LIST
the current channel selected.
3 - Navigate up to select
8.3
or a list filter.
All
Favourite satellite channels
The lists Radio or New are only shown when radio stations are
available or new channels were found with a channel update.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
channel to another location and press
.
OK
Favourite channels
5 - Once complete, press
to exit from the Favourite
EXIT
channel list.
You can mark channels as favourite channels. Your favourite
satellite channels are collected in the
satellite channel list.
list of the
Favourites
8.4
Watching favourite channels
Lock satellite channels
Set up a favourite channel list to easily switch between the
channels you want to watch.
To only switch between your favourite channels
Lock a channel
with and , select the Favourites list in the channel list
and close the channel list again.
+
-
You can lock a channel to prevent children from watching it. To
watch a locked channel you need to enter the Child lock code.
You cannot lock programmes from connected devices.
There are two favourite lists, one for TV channels and one for
satellite channels.
To lock a channel . . .
1 - While watching a TV channel, press
to
LIST
open the channel list.
Set up your favourites list
2 - In any list, select the channel you want to lock.
3 - Press and select . In a channel
list, a locked channel is marked with a lock .
OPTIONS
Lock channel
To compose a list of your favourite channels . . .
1 - While watching a channel, press
channel list.
to open the
LIST
To unlock a channel, select the locked channel in the channel list
and press select
.
Unlock channel
OPTIONS,
2 - In the menu bar, select for satellite channels.
3 - Select the list.
Favourites
4 - The TV will ask you to start adding channels immediately.
Press . To avoid a lot of reordering later, select the channels
Use an age rating
OK
in the order you want them in the list.
5 - To add a channel to the Favourites list, select the channel
To prevent children from watching a programme not suitable for
their age, you can use an age rating.
and press
favourite.
. You can then select another channel to add as a
OK
Some digital broadcasters have age rated their programmes.
When the age rating of a programme is equal to or higher than
the age you have set as age rating for your child, the programme
will be locked.
6 - To finish, press .
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
Add or remove favourite channels
To add or remove favourites list . . .
To set an age rating . . .
1 - While watching a TV channel, press
channel list.
2 - Select All to view all channels.
to open the
LIST
1 - Press and select
and press
.
OK
>
Setup
2 - Select
>
and
Satellite settings Child lock Parental rating
press
OK
3 - Select the channel, and press to mark as favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to the Favourites
list.
3 - Enter a 4-digit Child lock code and confirm. Now you can set
an age rating.
4 - Set the age and press
.
OK
5 - Press , repeatedly if necessary, to close the menu.
To remove a channel from the favourites list, press to
unmark as favourite.
To switch off the parental age rating, select as age setting.
None
The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes
with a higher rating.
Reorder favourite channels
You can only reorder channels in the Favourites list.
1 - In the channel list
to reposition.
, highlight the channel you want
Favourites
2 - Press .
3 - Select the channel to reorder and press
.
OK
4 - Press the
to move the highlighted
Navigation buttons
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing
Child lock code
You can install your satellites during the initial TV setup. The
satellite installation follows the TV channel installation. If you only
watch satellite channels, you can skip the TV channel installation.
You can always start a new satellite installation from the Setup
menu.
You can set or change the Child lock code.
To set the lock code or to change the current code . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
and
Satellite settings Child lock Change code
press
.
OK
To install satellite channels . . .
3 - If a code is set already, enter the current Child lock code and
then enter the new code twice.
1 - Press and select
and press
.
OK
Setup
Search for satellite
Install satellites
2 - Select
and press
.
OK
The new code is set.
3 - Select
and press
.
OK
4 - The TV shows the current installation setting. If the current
setting corresponds with the satellite installation you want, you
Forgotten your Child lock code?
If you forgot your code, you can override the current code and
enter a new code.
can start searching for satellites. Select
and press
. Go
OK
Search
to step 5. If the current setting is not the setting you want, select
and press . Go to step 4b.
Settings
OK
1 - Press and select
and press
.
OK
Setup
- In the Settings menu, select the exact number of satellites
4b
you want to install. Or, if you use a Unicable setup, select
or according
2 - Select
>
>
and
Satellite settings Child lock Change code
press
.
OK
Unicable for 1 satellite Unicable for 2 satellites
the number of satellites you want to install for Unicable. Select
the setting you want and press
3 - Enter the overriding code
.
8888
4 - Now enter a new Child lock code and enter it again to
confirm.
.
OK
- If the exact number of satellites is set or you completed the
4c
Unicable settings, select
and press
.
OK
Search
5 - The TV will search for satellites available on the alignment of
your antenna dish. This may take a few minutes. If a satellite is
found, its name and reception strength are shown on screen.
6 - If a channel package is available for any of the satellites found,
you can select the package you want.
8.5
Satellite installation
Installing satellites
7 - To install the channels of the satellites found, select
Install
and press
. The TV shows the number of channels and radio
OK
stations found.
8 - To store the satellite settings, all satellite channels and
About installing satellites
This TV has a built-in satellite DVB-S/DVB-S2 receiver. Connect
the cable from your satellite dish directly to the TV. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
satellite radio stations, select
and press
.
OK
Finish
Channel packages
Up to 4 satellites
About channel packages
You can install up to 4 satellites (4 LNBs) on this TV. Select the
exact number of satellites you wish to install at the start of the
installation. This will speed up the installation.
Satellites can offer channel packages that bundle free channels
(free-to-air) and offer a sorting that suits a country. Some
satellites offer subscription packages - a collection of channels
you pay for.
Unicable
You can use a Unicable system to connect the antenna dish to
the TV. Select if you are installing satellites for a Unicable system,
for 1 or for 2 satellites at the start of the installation.
If you choose a subscription package, the TV might ask you to
select a Quick or Full installation.
Select
to install the channels of
Satellite operator channels only
the package only or select
to install the
All satellite channels
MDU - Multi-Dwelling-Unit
package and all other available channels too. We recommend a
Quick installation for subscription packages. If you have
additional satellites that are not part of your subscription
package, we recommend a Full installation. All installed channels
are put in the channels list All.
The satellite receiver of this TV supports MDU on the Astra
satellites and for Digiturk on the Eutelsat satellite. MDU on
Türksat is not supported.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Update channel packages
With
channels that were in the satellite channel list before but are
now missing. The missing channels were repositioned on the
transponder by the satellite operator. The TV must be updated
with the latest version of the channel package.
User band number
, you can bring back satellite
Update channel package
In a Unicable system, each connected satellite receiver must be
numbered (e.g. 0, 1, 2 or 3 etc.).
You can find the available user bands and their number on the
Unicable switchbox. User band is sometimes shortened as UB.
There are Unicable switchboxes that offer 4 or 8 user bands. If
you select Unicable in the settings, the TV will ask you to assign
the unique user band number for its built-in satellite receiver. A
satellite receiver cannot have the same user band number as
another satellite receiver in the Unicable system.
To download the latest version of the channel package . . .
- Go to the Philips support website
1
and enter the type number of your TV.
- Click on and look for the file :
2
Software and drivers
PredefinedSortingList
- Download the file on your computer and copy the file on
3
the root directory of a USB flash drive, not in a folder (if
necessary, unzip the file first).
User band frequency
Next to the unique user band number, the built-in satellite
receiver needs the frequency of the selected user band number.
These frequencies are mostly shown next to the user band
number on a Unicable switchbox.
- Plug the USB flash drive into the TV and press and
4
select
and press
.
OK
Setup
- Select
>
>
5
Satellite settings Channel installation Update
and press
.
OK
channel package
- The TV will copy the file and ask you to start a channel
6
update immediately. Select
and press
. This may take a
OK
Yes
few minutes. If you want to postpone the channel update, you
can do it later with
Add a satellite
>
>
Setup Search for satellite Update
.
channels
7
You can add an additional satellite to your current satellite
installation. The installed satellites and their channels remain
untouched. However, some satellite operators do not allow
adding a satellite.
- After the channel update is done, the missing channels
should be back at their former position in the satellite channel
list.
The additional satellite should be seen as an extra, it is not your
main satellite subscription or not the main satellite of which you
use its channel package. Typically, you would add a 4th satellite
when you have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one first to be
able to add a new satellite.
Unicable setup
The Unicable system
You can use a Unicable system to connect the antenna dish to
the TV. A Unicable system uses one cable to connect the
satellite dish to all satellite receivers in its system. Unicable is
typically used in apartment buildings. If you use a Unicable
system, the TV will ask you to assign a user band number and
corresponding frequency during the installation. You can install 1
or 2 satellites with Unicable on this TV.
Settings
If you currently have only 1 or 2 satellites installed, the current
installation settings might not allow adding an extra satellite. If
you need to change the installation settings, you must redo the
complete satellite installation. You cannot use
change of settings is needed.
if a
Add satellite
If you notice some missing channels after a Unicable installation,
another installation might have been done at the same moment
on the Unicable system. Do the installation again to install the
missing channels.
To add a satellite . . .
- Press and select
and press
and press
.
OK
.
OK
1
2
3
Setup
- Select
- Select
Search for satellite
and press
. The current satellites are
Add satellite OK
and press . The TV will search for new
OK
shown.
- Select
4
Add
satellites.
- If the TV has found one or more satellites, select
and
5
Install
press
. The TV installs the channels of the found satellites.
OK
- To store the channels and radio stations, select
and
Finish
6
press
.
OK
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove a satellite
Update satellite channels
You can remove one or more satellites from your current
satellite installation. You remove the satellite and its channels.
However, some satellite operators do not allow removing a
satellite.
Once a day, at 6 AM, the TV automatically updates the satellite
channels. A channel update looks for new channels and adds
them to the channel list. No longer available channels are
removed and if a provider reorders its channel package, the
channel list of the TV will be updated. The TV must be on
standby to automatically update the satellite channels.
Alternatively, you can do a channel update yourself at any
moment.
To remove satellites . . .
- Press and select
and press
.
OK
1
2
3
Setup
- Select
- Select
and press
.
Search for satellite
Remove satellite
OK
. The current satellites
OK
and press
are shown.
- Use the arrows keys to select the satellite you want to
New channels, found with the channel update, are marked with
the letter N and collected in the channel list New. New
channels are also added in the All channel list. New channels
stay in the channel list New as long as you do not tune to them
or mark them as a favourite.
4
remove.
- Press
to mark a satellite to remove. Press again to
OK
5
OK
unmark.
- Select
, press
and confirm. The satellites are
to close Remove satellite.
6
Remove
OK
OK
Switch off the automatic channel update
removed.
- Select
and press
Exit
7
You can completely switch off the TV at night to avoid a channel
update. Alternatively, you can switch off the automatic update in
the setup menu.
Reorder and rename channels
1 - Press and select Setup and press OK.
2 - Select
>
>
Satellite settings Channel installation Automatic
You can reorder and rename satellite channels.
and select
.
Off
channel update
Switch off the update for a specific satellite
1 - Press and select and press
Reorder
.
Setup
OK
You can only reorder channels in the Favourites list. For more
information on Reordering satellite channels, press
2 - Select
>
>
Satellite settings Channel installation Automatic
Keywords
.
update option
and look up
.
Satellite, reorder channels
Rename channels
You can rename channels in the channel list.
3 - With the arrow keys, select the satellite you do not wish to
update. Press to unmark the satellite.
OK
and press
4 - Select
to close the menu.
OK
Done
The TV will not update the channels from the satellite you
unmarked.
- Select the channel you want to rename in one of the channel
1
lists -
,
,
or .
All Favourites Radio New
Start an update yourself
- Press . You can enter text with the remote
2
Rename
1 - Press and select
and press
.
OK
Setup
control keyboard or open the on-screen keyboard.
2 - Select
and press
.
OK
Search for satellite
3 - Select
and press
.
OK
Update channels
With the remote control keyboard
4 - If you want to check which satellites are set for updating,
select and press
To delete a character, position the cursor behind the character
and press .
To enter a character, press the character on the keyboard.
.
OK
Settings
5 - With the arrow keys, mark or unmark the satellites for
updating. Select and press
.
Done
and press
OK
. The update may take a few
OK
When you are ready, press
to finish renaming.
to select
. Press
Done
again
OK
OK
6 - Select
minutes.
7 - Select
Update
For more information on entering text, press
and
Keywords
and press
.
OK
Finish
look up
.
Remote control, keyboard
With the on-screen keyboard
To open the on-screen keyboard, place the cursor in the name
text field and press
Languages and audio
.
OK
Preferred languages and subtitles
To delete the character in front of the cursor, press
.
Backspace
To enter a character, select the character with the arrow keys
and press
Satellite channels can hold different audio languages, subtitle
languages or Text languages. You can set the TV to
automatically switch to the language, subtitle language or Text
language you prefer, if this language is available on the channel or
Text pages.
.
OK
To select uppercase letters, press .
To select numbers or special characters, press .
When you are ready, press to close the on-screen keyboard.
To finish renaming, select
and press
.
OK
Done
To set the your preferred language . . .
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Press and select
and press
.
- Press and select
and press
.
OK
>
Setup
OK
.
1
2
Setup
2 - Select
3 - Select
and press
- Select
>
>
Satellite settings
and press
OK
Satellite settings Languages Audio description
. Select the setting you want.
and press
.
Languages
OK
Speakers / Headphones
- Select
OK
or
4 - Press , repeatedly if necessary, to close the menu.
,
3
Speakers Headphones Speakers + headphones
and press
.
OK
- Press , repeatedly if necessary, to close the menu.
4
Hearing impaired audio
Some digital TV channels broadcast special audio and subtitles
adapted for hearing impaired people.
Mixed volume
With Hearing impaired switched on, the TV automatically
switches to the adapted audio and subtitles, if available. Before
you can switch on Hearing impaired, you have to switch on
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume . . .
.
Universal access
- Press
and select the
tab in the menu
Options
1
OPTIONS
bar.
Switch on
- Select
>
and press
.
OK
2
3
4
Universal access Mixed volume
- Use the arrows up and down to set the slider bar.
- Press to confirm.
To switch on Hearing impaired, press
, select
OPTIONS
, select
Hearing impaired
and press
.
OK
.Select
Universal access
and press
OK
OK
On
To check whether a hearing impaired audio language is available,
press , select and look for an
OPTIONS
Audio language
Audio effect
audio language marked with a .
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
If Universal access does not appear in the Options menu, switch
on in Setup.
Universal access
For more information, press
To switch on Audio effects (if available) . . .
and look up
Keywords
- Press and select
and press
.
OK
>
1
2
Setup
.
Universal access
- Select
>
>
Satellite settings Languages Audio description
and press
.
Audio effects
OK
- Select
or
On Off
and press
.
3
4
OK
Audio description
Switch on
- Press , repeatedly if necessary, to close the menu.
Digital TV channels can broadcast special audio commentary
describing what is happening on screen. To be able to set the
Audio description audio and effects, you have to switch on
Audio description first. Also, before you can switch on Audio
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
description, you have to switch on
.
Universal access
To switch on these subtitles (if available) . . .
- Press and select
and press
.
OK
>
1
2
Setup
Audio description
- Select
>
>
Satellite settings Languages Audio description
With Audio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
and press
.
OK
Speech
3
- Select
(audio) or
and press
.
OK
Descriptive
Subtitles
- Press , repeatedly if necessary, to close the menu.
4
- With
switched on, press
OPTIONS
1
Universal access
and select the
tab in the menu bar.
Options
- Select
- Select
and press
.
OK
2
3
Audio description
Manual installation
and press
.
OK
On
You can check if an audio commentary is available.
In the menu, select and look for an
audio language marked with a .
Manual installation is intended for expert users.
Options
Audio language
You can use Manual installation to quickly add new channels
from a satellite transponder. You need to know the frequency
and polarization of the transponder. The TV will install all
channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are
moved to the end of the channel list All.
Speakers / Headphones
You can select where you want to hear the audio commentary.
On the TV speakers only, on the headphones only or on both.
You cannot use Manual installation if you need to change the
number of satellites. If this is needed, you have to do a complete
installation with Install satellites.
To set Speakers / Headphones . . .
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To install a transponder . . .
- Press and select
- Select
and press
.
1
2
Setup
OK
Satellite settings Channel installation Manual
and press
>
>
.
OK
installation
- If you have more than 1 satellite installed, select the
3
satellite/LNB for which you want to add channels.
- Set the you need. If you set the
4
Polarization
Symbol rate
Symbol rate
and start searching for the
to
mode Manual
manually. Enter the
transponder.
, you can enter the symbol rate in
Frequency
- If a transponder is found, select
and press
to store
OK
5
Store
the new transponder on the selected LNB.
- Select to leave the manual installation.
6
Exit
8.6
Problems with satellites
The TV cannot find the satellites I want or the TV installs the
same satellite twice
• Make sure that the correct number of satellites is set in
Settings at the start of the installation. You can set the TV to
search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
• If the TV finds one satellite but cannot find a second one, turn
the dish a few degrees. Align the dish to get the strongest signal
on the first satellite. Check the signal strength indicator of the
first satellite on screen. With the first satellite set at the strongest
signal, select Search again to find the second satellite.• Make
sure the settings are set to Two satellites.
Changing the installation settings did not solve my problem
• All settings, satellites and channels are only stored at the end
of the installation when you finish.
All satellite channels are gone
• If you use a Unicable system, make sure you assigned a unique
user band number to the satellite receiver in the Unicable
settings. It might be that another satellite receiver is using the
same user band number.
Some satellite channels seem to have disappeared from the
channel list
• If some channels seem to be gone or displaced, the
broadcaster might have changed the transponder location of
these channels. To restore the channel positions in the channel
list, you can try an update of the channel package.
I cannot remove a satellite
• Subscription packages do not allow removing a satellite. To
remove the satellite, you have to do a complete installation again
and select another package.
Sometimes the reception is poor
• Check if the satellite dish is solidly mounted. Strong winds can
move the dish.
• Snow and rain can degrade the reception.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Home menu
From the Home menu, you can start any activity you can do
with the TV.
Open the Home menu to start watching TV or start watching a
disc on your Home Theatre System. Also in the Home menu,
you can open Smart TV to surf the Internet, start Skype or open
Help if you need information on using the TV.
Open the Home menu
1 - To open the Home menu, press .
2 - Select an activity using the arrow keys and press
to start
OK
the activity.
3 - To close the Home menu without changing the current
activity, press .
•
Help
Select
and press
to open the on screen Help. You can
OK
Help
look up a topic in an alphabetical list.
•
Setup
Select
to install channels or adjust all TV settings.
Setup
•
Satellite
Select
and press
to watch satellite channels.
Satellite
OK
•
TV
Select
and press
to watch TV channels.
TV
OK
•
Smart TV
Select
page.
and press
to open the Smart TV start
OK
Smart TV
•
Source
Select
and select a connected device in the list
Source
underneath the icon. Press
to switch to the selected device.
OK
•
TV guide
Select
and press
to open a list of the current and
TV guide
OK
scheduled TV programmes of your channels.
•
Recordings
Select
Recordings
recordings.
and press
to open the list of your
OK
•
Skype
Select
to make video calls for free.
Skype
•
Demo
Select
to watch demonstration videos.
Demo
42
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Change day
TV guide
10.1
The TV guide can show scheduled programmes for the
upcoming days (maximum up to 8 days).
If the TV guide information comes from the broadcaster, you
can press to view the schedule of one of the next days.
Press to go back to the previous day.
+
What you need
With the TV guide you can view a list of the current and
scheduled TV programmes of your channels. Depending on
where the TV guide information (data) is coming from, analogue
and digital channels or only digital channels are shown. Not all
channels offer TV guide information.
Alternatively, you can press
and select
OPTIONS
Change
, to select
.
day
Select
,
or and press
Previous day Today Next day OK
the day of the schedule.
The TV can collect TV guide information for the channels that
are installed on the TV (e.g the channels you watch with Watch
TV). The TV cannot collect the TV guide information for
channels viewed from a digital receiver.
Set a reminder
You can set reminders that alert you of the start of a
programme with a message on screen.
• To set a reminder, select the programme in the schedule and
10.2
press for
. The programme is marked with a
Set reminder
clock.
Using the TV guide
• To cancel the reminder, press the for
.
Clear reminder
• To view a list of all reminders you have set,
press
Open the TV guide
.
OPTIONS, and select All reminders
To open the TV guide, press
.
TV GUIDE
Press
again to close.
TV GUIDE
Search by genre
If the information is available, you can look up scheduled
programmes by genre like movies, sports, etc.
To search for programmes by genre, press
and
OPTIONS
select
.
Search by genre
Select a genre and press
programmes appears.
. A list with the found
OK
The first time you open the TV guide, the TV scans all TV
channels for programme information. This may take several
minutes. TV guide data is stored in the TV.
10.3
Recordings
From the TV guide, you can instantly record or schedule a
recording of a TV programme. To store the recordings, connect
a USB Hard Drive to the TV.
Tune to a programme
Switch to a programme
For more information on Recording, press
and
Keywords
From the TV guide, you can switch to a current programme.
To select a programme, use the arrow keys to highlight the
programme name.
look up
.
Recording
Navigate to the right to view programmes scheduled later that
day.
To switch to the programme (channel), select the programme
and press
.
OK
View programme details
To call up the details of the selected programme,
press
.
INFO
43
Download from Www.Somanuals.com. All Manuals Search And Download.
To rescan all TV connections and update the Sources menu,
11
press
select
and press
.
OK
OPTIONS.
Scan connections
Sources
11.1
11.2
From standby
With the TV in standby, you can switch on a connected device
with your TV remote control.
Sources list
In the list of connections - the Source menu - you can find the
devices connected to the TV. From this Source menu, you can
switch to a device.
Play
To switch on both disc player and TV from standby and start
playing the disc or programme immediately, press (play) on
the TV remote control.
The device should be connected with an HDMI cable and both
TV and device must have HDMI CEC switched on.
Sources menu
To open the Sources menu, press
.
SOURCES
To switch to a connected device, select the device with the
arrows (left) or (right) and press
.
OK
For some devices (HDMI-CEC devices), you can select an
activity directly in the list underneath the device icon.
Select the device and select an activity and press
.
OK
To close the Source menu without switching to a device,
press again.
SOURCES
Home Theatre System
You can switch on your Home Theatre System to listen to an
audio disc or a radio channel and leave the TV in standby.
To only switch on the HTS, with the TV in standby,
press
on the TV remote control.
SOURCES
Automatic detection
When you connect a new device to the TV, the device is
detected automatically and put in the Sources menu. The device
is shown as an icon (the device type) and has a name. If the
device type does not correspond with the device, e.g. the TV
says it is a player but it is not, you can change the type.
11.3
EasyLink
To change the type of the device, press
and
Change type
With
you can operate a connected device with the TV
EasyLink
select a type that fits the device and press
If the name does not fit the device or you want to give the
.
OK
remote control. EasyLink uses HDMI CEC to communicate with
the connected devices. Devices must support HDMI CEC and
must be connected with an HDMI connection.
device a name of your own, press
. Use the remote
Rename
control keypad to enter a new name.
For more information, press
and look
Keywords
An appropriate device type helps you in using the device. The
device type determines picture and sound styles, resolution
values, specific settings or the position within the Sources menu.
up
.
EasyLink
When you connect a new device to the TV, the icon of the
device jumps to the front of the Sources menu.
If the TV does not detect the device automatically, select the
connection you used to connected the device and adjust the
Device type and name.
Original name and icon
To restore the device icon to its original name and type icon,
press
Select
and
Original name and icon
OPTIONS.
press
.
OK
Scan connections
44
Download from Www.Somanuals.com. All Manuals Search And Download.
off.
12
To deactivate the
. . .
Switch off timer
Timers and clock
1 - Press and select
and press
.
OK
Setup
>
2 - Select
>
TV settings General settings Switch off timer
12.1
and set the slider bar to
.
Off
3 - Press , repeatedly if necessary, to close the menu.
Sleeptimer
With the sleep timer, you can set the TV to switch to standby
automatically after a preset time.
For more information on environmentally friendly TV settings,
press
and look up
.
Eco settings
Keywords
To set the sleep timer . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
.
TV settings General settings Sleep timer
With the slider bar you can set the time to up to 180 minutes in
increments of 5 minutes. If set to , the sleep timer is
0 mins
switched off. You can always switch off your TV earlier or reset
the time during the countdown.
3 - Press , repeatedly if necessary, to close the menu.
12.2
Clock
To know what time it is, press
to find the time in
TV GUIDE
the TV guide.
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
To correct the TV clock . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings General settings Clock Auto
and select
.
Country dependent
clock mode,
3 - Select
and select the appropriate setting.
Daylight saving
4 - Press , repeatedly if necessary, to close the menu.
To set the TV clock manually . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings General settings Clock Auto
and select
.
clock mode,
Manual
3 - Select
and
Time
to adjust.
Date
4 - Press , repeatedly if necessary, to close the menu.
12.3
Switch off timer
If you do not press a key on the remote control during a 4 hour
period, or if the TV receives no input signal nor remote control
commands for 10 minutes, the TV switches off automatically to
save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, you should deactivate the automatic switch
45
Download from Www.Somanuals.com. All Manuals Search And Download.
You can check the battery level when you switch on the 3D
glasses.
13
• If the LED light blinks green, you can use the glasses for 4
hours or more.
• If the LED light blinks orange, you can use the glasses for at
least 2 hours but less than 4.
• If the LED light blinks red, the battery is almost empty and less
than 2 hours of 3D watching remain.
3D
13.1
What you need
For Active 3D sets
Switch off
To switch off the 3D glasses, press . The LED light blinks red 4
times. When the 3D glasses do not receive 3D signals for 2
minutes, the glasses switch off automatically.
This is an Active 3D TV. On this TV, you can watch 3D
programmes and movies in full High Definition resolution with
Active 3D.
To watch 3D you need to :
• Tune to a TV channel that broadcasts programmes in 3D.
• Rent a movie in 3D from an online video store with Smart TV.
• Watch a movie in 3D from a 3D Blu-ray Disc, a USB device or
computer.
3D transmitter
Make sure the receiver lens in the centre of the glasses can
receive the 3D signals. Also, clear objects away from the 3D
transmitter on the TV.
Also, to watch 3D on this TV, you will need one of these types
of Philips Active 3D glasses. . .
1 - 3D transmitter on the TV
2 - 3D receiver on the 3D glasses
• PTA507
• PTA508
• PTA509
• PTA517
• PTA518
• PTA519
Two-player gaming
You can use these glasses to play two-player games. Two players
can watch the same TV but see two different screens to play a
game.
To switch the glasses to watch the Player 1 or Player 2 screen,
13.2
switch on the glasses and then press the
key.
Player 1/2
The 3D glasses
• If the LED light is orange and lits continuously for 2 seconds,
the glasses are set for player 1.
• If the LED light is orange and blinks, the glasses are set for
player 2.
For Active 3D sets
Overview
For more information, press
and look up
Two-
Keywords
1 - On or off switch
.
player gaming
2 - Player 1 or player 2 selection
3 - Receiver lens
4 - Battery compartment
Replacing the batteries
When you unpack the 3D glasses, also remove the small plastic
foil from the battery compartment that prevents the battery
from running empty.
To replace the battery of the 3D glasses PTA508, unscrew the
small battery lid and replace the battery: type CR2032 (3V).
Make sure the + side of the battery is visible. Replace the lid and
fix it with the screw.
To replace the battery of the 3D glasses PTA509, PTA519,
press the small knob on the battery lid and slide the lid up to
open. Replace the battery: type CR2032 (3V). Make sure the +
side of the battery is visible. Replace the lid and slide it down
until it clicks.
Switch on and off
Switch on
When a 3D programme is shown on screen, press on the 3D
glasses and put them on. The glasses need some seconds to
adjust to the 3D signal from the 3D transmitter on the TV. At
first use, this may take up to 15 seconds.
Warning
• Do not ingest battery, chemical burn hazard.
• This product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe internal
burns in just two hours and can lead to death.
Battery level
46
Download from Www.Somanuals.com. All Manuals Search And Download.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using
the product and keep it away from children.
• If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
• Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
, then press
.
OK
bottom
Stop 3D
To stop watching 3D, press , select
and select
.
2D
3D settings
3D is switched to 2D when you switch to another channel or
connected device.
2D to 3D conversion
You can convert any 2D programme to watch it in 3D.
13.3
1 - Press .
2 - Select
>
.
3D settings 2D to 3D conversion
Care of the 3D glasses
• Do not use cleaning chemicals containing alcohol, solvent,
surfactant, or wax, benzene, thinner, mosquito repellent or
lubricant. Using these chemicals can cause discoloration or
cracks.
Adjust the 3D depth
1 - Press and select Setup, then press OK .
2 - Select
>
>
.
TV settings 3D 3D effect
3 - Select
, or
.
On
Off
4 - Press , repeatedly if necessary, to close the menu.
• Do not expose the 3D glasses to direct sunlight, heat, fire or
water. This may result in a product malfunction or fire.
• Do not drop, bend or apply force to the lenses of the 3D
glasses.
Switch off 2D to 3D conversion
1 - Press .
• Use a clean soft cloth (microfiber or cotton flannel) to clean
the lenses to avoid scratching them. Never spray cleaner directly
onto the 3D glasses. This may damage the electronics (for
Active 3D glasses).
2 - Select
>
, then press
.
OK
3D settings 2D
13.5
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that you:
13.4
Watch 3D
To experience the best 3D effect while you watch 3D
programmes:
• sit at least 3 times the height of the TV screen away from the
TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or certain energy
saving light bulbs which operate on a low frequency) and direct
sunlight as they may interfere with the 3D experience.
• Sit at a distance that is at least three times the width (w) of
the TV screen.
• Do not sit more than 6m away.
3D switching
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future.
• To switch to 3D automatically, select
.
Automatic
• To show a notification first, select
• To never switch to 3D, select
.
Notification only
.
Never
You can still change this preference in >
>
Setup TV settings
>
>
.
3D Switch to 3D
Start 3D
When the TV switches to 3D or when a notification is shown
that 3D is available, put on your 3D glasses.
13.6
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
Health warning
• Watching 3D is not recommended for children under the age
of six.
• If you or your family have a history of epilepsy or
photosensitive seizures, consult a medical professional before
exposing yourself to flashing light sources, rapid image sequences
or 3D viewing.
screen. To switch to 3D, adjust the 3D settings and select
Side
or
according to the double image
by side Top / bottom
positions.
1 - Press .
2 - Select
>
or
3D settings 3D - Side by side 3D - Top /
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you experience any discomfort, stop watching 3D and do
not immediately engage in any potentially hazardous activity (for
example driving a car) until your symptoms have disappeared. If
symptoms persist, do not resume watching 3D without
consulting a medical professional first.
• To avoid discomfort such as dizziness, headache or
disorientation, we recommend not watching 3D for extended
periods of time.
• Do not use the 3D glasses for any purpose other than
watching 3D TV.
• If you normally wear corrective glasses or use contact lenses,
wear the 3D glasses together with these glasses or lenses.
• Keep the glasses away from small children to avoid the
swallowing of small parts or batteries.
• Parents should monitor their children during 3D viewing and
ensure they do not experience any discomfort as mentioned
above. Watching 3D is not recommended for children under six
years of age as their visual system is not fully developed yet.
• Avoid the use of the 3D glasses in case of eye infection or
other diseases transmitted by contact (e.g. conjunctivitis, head
lice, etc.). Only start using the 3D glasses again when the
infection has disappeared completely.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
14
What you need
To play a two-player game with this TV, you need 2 active 3D
glasses - Philips PTA507, PTA508, PTA509, PTA517, PTA518 or
PTA519.
Games
14.1
Also, the game console must be connected with HDMI.
Play a game
Play a two-player game
With a game console connected to the TV, you can play games
on TV.
To start a two-player game . . .
For more information on connecting a game console, press
Keywords and look up Game console, connect.
1 - Press
, select the game console and press
SOURCES
.
OK
2 - On the game console, start the game and select the multi or
two-player mode. Select the mode for split screen viewing.
Start a game
3 - On the TV, press , select
and press
.
OK
2 player gaming
4 - Select the format in which the split screen game is shown on
screen, or and press . The TV
1 - Press
, select the game console and press
SOURCES
.
OK
2 - On the game console, start the game and select the multi or
two-player mode.
Side by side Top / bottom
shows the 2 screens as full screens.
To watch the 2 different screens, put on the 3D glasses.
OK
Ideal game setting
For some games, where speed and precision is needed, set the
TV to the ideal
If your game console is added as a
To switch the glasses to watch the Player 1 screen or Player 2
setting before you start playing.
Game
screen, press the
selection key on the glasses.
Player 1/2
type of device in the
Game
In and out of split screen view
menu (list of connections), the TV is set to the ideal
Sources
setting automatically.
In two-player split screen view, you can switch back and forth
from split screen to combined view, to be able to read the game
menu or game scores.
Game
If the type of your game console is set as
and used as a
Player
disc player most of the time, leave the device type set to
.
Player
To switch views back and forth, press
control of the TV.
on the remote
OK
To set the TV to the ideal setting manually . . .
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Picture Advanced Activity
and press
Stop a Two-player game
>
>
.
style
OK
To stop the two-player split screen view, press and select
another activity.
3 - Select
and press
.
OK
Game
4 - Press , repeatedly if necessary, to close the
menu. Remember to set setting back to TV when
Activity Style
you stop playing the game.
14.2
Two-player games
For Active 3D sets
About two-player gaming
If you play a multi-player game with split screens, you can set the
TV to show each screen as a full screen. Each player sees only
his part of the game, full screen. The TV uses 3D technology to
show both screens.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
15
The menu bar
Navigate to the menu bar and select the type of file you want to
watch or play.
Your photos, videos
Select
,
or
. Alternatively, you
Photos
Music
Videos
can open the
view and browse your folders to look
Folders
and music
for a file.
15.1
Sorting
From a USB connection or
network computer
To browse your photos by date, month, year or alphabetically
by name, press
.
Sort
To browse your music by album, artist, genre or alphabetically
by name, press
.
Sort
Videos are sorted alphabetically.
What you need
You can view your photos or play your music and videos from a
connected USB flash drive or USB Hard Drive. If you have a
computer in your home network, you can view and play your
files from your computer on the TV.
View photos
To view photos, select
in the menu bar, select a
Photos
photo thumbnail and press
If there are several photos in the same folder, select a photo and
.
OK
From a USB device
With the TV switched on, plug in a USB flash drive or USB Hard
Drive to one of the USB connections. The TV detects the
device and lists your files.
press
to start a slide show of all photos in this
Slide show
folder.
To jump to the next or previous photo, press or .
+
To stop the slide show or close the photo, press
(Stop).
-
If the list does not appear automatically, press
,
SOURCES
or
LIST
select
and press
.
OK
Browse USB
You can play music with a slide show.
Start the slide show after you started the music.
- Select a song or a folder with songs and press
.
OK
1
- Press
and select .
Photos
2
LIST
- Select a photo or a folder with photos and press
3
Slide
.
show
Info
Warning
If you try to pause or record a programme with a USB Hard
Drive connected, the TV will ask you to format the USB Hard
Drive. This formatting will delete all current files on the USB
Hard Drive.
To view info on a photo (size, creation date, file path, etc.),
select a photo and press
Press again to hide the info.
.
INFO
Options
Press
.
OPTIONS
From a computer
•
Shuffle
If the TV and the computer are in the same network, the TV can
browse and play files stored on your computer.
On your computer, you need to install media server software
like Twonky™ to share your files with the TV. The TV shows
your files and folders as they are organised on your computer.
Shows your photos in a random order.
•
Plays the slide show continuously.
•
Sets the speed of the slide show.
•
Sets the style of the photo transitions.
Repeat
Slide show speed
To browse the files on your computer, press
,
SOURCES
Slide show transition
select
and press
.
OK
Browse network
To close
or
, press and select
Browse USB Browse network
another activity.
Menu bar and sorting
With a USB device connected, the TV sorts the files by type.
Navigate to the menu bar and select the type of file you are
looking for.
If you browse files from a computer, you can only browse the
files and folders as they are organized on the computer.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Shuffle
Play music
Plays your videos in a random order.
•
Plays a video once or continuously.
Repeat
To play music, select
in the menu bar, select a song
Music
and press
.
OK
If there are more songs in the same folder, press
play all songs in this folder.
to
Play all
To close
or
, press and select
Browse USB Browse network
another activity.
To jump to the next or previous song, press or .
+
-
To pause the music, press
. Press
again to continue.
OK
OK
To make a 10-second jump in a song or 10-second jump back,
press or .
15.2
To rewind or fast forward, press or . Press the keys
several times to speed up - 2x, 4x, 8x, 16x, 32x.
To stop the music playback, press (Stop).
Wi-Fi Miracast
About Wi-Fi Miracast
If you press
or , the music keeps on playing.
LIST
Your TV is a
device. With
Wi-Fi Certified Miracast™
Info
Miracast™, you can watch and share the screen of your
smartphone, tablet or computer on your TV screen wirelessly.
You can stream videos (audio and video), share photos or
anything else that's on screen of the device. No need to connect
the device to your home network. Both the TV and the device
must be Wi-Fi Certified Miracast™ devices and have Miracast
switched on.
To view song info (title, artist, duration, etc.), select the song and
press
Press again to hide the info.
.
INFO
Options
Press
.
OPTIONS
•
Shuffle
Plays your music randomly.
•
Repeat
Plays the song once or continuously.
To close
or
, press and select
Browse USB Browse network
another activity.
For more information on Wi-Fi Certified Miracast™ go to
Play videos
, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
Wi-Fi®
To play a video, select
video and press
If there are more videos in the same folder, press
in the menu bar, select a
Videos
registered trademarks of the Wi-Fi Alliance.
Wi-Fi CERTIFIED
.
OK
,
™ are trademarks of the Wi-Fi Alliance.
Miracast™ Miracast
Play
to play all videos in this folder.
all
To jump to the next or previous video, press or .
+
-
Switch Miracast On or Off
To pause the video, press
To make a 10-second jump forward or backward in a
video, press or .
. Press
again to continue.
OK
OK
Switch on Miracast
To rewind or go fast forward, press or . Press the keys
several times to speed up - 2x, 4x, 8x, 16x, 32x.
To stop the video playback, press (Stop).
Make sure Wi-Fi Miracast is switched on.
- Press and select
and press
.
1
2
Setup
OK
and
Network settings Wi-Fi Miracast On
- Select
>
>
press
.
OK
Info
- Press , repeatedly if necessary, to close the menu.
3
To view info on a video (playhead position, duration, title, date,
Switch off Miracast
etc.), select the video and press
.
INFO
Press again to hide the info.
If you do not want the TV to receive requests for screen sharing
from other devices, you can switch off Miracast on the TV.
Options
- Press and select
- Select
and press
>
.
1
2
Setup
OK
and
Network settings Wi-Fi Miracast Off
Press
.
OPTIONS
Subtitles
If available, you can switch subtitles
>
press
.
OK
•
- Press , repeatedly if necessary, to close the menu.
3
,
or .
On Off On during mute
51
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Press , repeatedly if necessary, to close the menu.
Share a screen on TV
Blocking a previously connected device
To share the screen of your smartphone, tablet or computer on
the TV . . .
If you want to block a device that you previously connected, you
need to clear the Wi-Fi Miracast connections list first. If you clear
this list, you will have to confirm or block the connection for
every device again.
1 - Switch on the TV.
2 - On the device, open an application such as Wi-Fi Miracast,
Wi-Fi Direct™, Intel®Wireless Display* or similar and start
scanning for other Miracast devices.
3 - In the list of found devices, select the TV and connect.
4 - On the TV, agree to the request to connect to the TV. You
might be asked to enter a PIN code from the device on the TV -
enter the numbers with the digit keys on the remote control.
Alternatively, you might be asked by the TV to enter a PIN code
on the device. If you connect, the TV will show the screen of the
device.
Screen delay
The normal delay when sharing a screen with Miracast is about 1
second. The delay might be longer if you are using older
devices/computers with less processing power.
5 - On the device, select the videos, photos or files you want to
watch on TV.
Specifics
• Miracast on this TV is subject to the HDCP protocol and
cannot display copy-protected premium content sent by a
device.
* Miracast is supported by WiFi 3.5 onwards.
• The maximum video resolution supported is 720p.
Stop sharing
You can stop sharing a screen from the TV or from the mobile
device.
From the device
With the application you use to start Miracast, you can
disconnect and stop watching the screen of the device on TV.
The TV will switch back to the last selected programme.
From the TV
To stop watching the screen of the device on TV, you can . . .
• press to watch a TV broadcast
• press to start another activity on TV
• press
to open the Sources menu and select a
SOURCES
connected device.
Block a device
The first time you receive a request to connect from a device,
you can block the device. This request, and all requests in the
future, from this device, will be ignored.
To block a device, select
in the request window and
Block . . .
press
.
OK
Unblock all devices
All previously connected and blocked devices are stored in the
Wi-Fi Miracast list of connections. If you clear this list, all blocked
devices will be unblocked.
To unblock all blocked devices . . .
1 - Press and select
2 - Select
and press
>
.
Setup
OK
Network settings Reset Miracast group
to clear the list.
.
3 - Press
OK
52
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Pause TV
You can pause a TV broadcast and resume watching it later.
Only digital TV channels can be paused. You must connect a
USB Hard Drive to buffer the broadcast. You can pause a
broadcast for a maximum time span of 90 minutes.
For more information, press
and look up
USB
Keywords
.
Hard Drive
Pause or resume a broadcast
To pause a broadcast, press (Pause). A progress bar appears
briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). The icon on screen
indicates you are watching a paused broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast, press (Stop).
The moment you switch to a digital channel, the USB Hard
Drive starts buffering the broadcast. When you switch to
another digital channel, the broadcast of the new channel is
buffered and the broadcast of the former channel is cleared.
When you switch to a connected device (a Blu-ray Disc player
or digital receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to standby
the broadcast is cleared.
Whilst recording a programme on the USB Hard Drive, you
cannot pause a broadcast.
Instant replay
Whilst watching a broadcast from a digital TV channel, you can
easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press (Pause) and press (Left).
You can press repeatedly until you reach the start of the
broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press (Rewind) or press
(Forward) to select from where you want to start viewing
the paused broadcast. Press these keys repeatedly to change
speed.
Specifics
• The Audio Description audio (commentary) for the visually
impaired is not available for playback in Pause TV or Recording.
• You can buffer the digital (DVB) subtitles of a channel. You
cannot buffer subtitles that come from Text services. To check if
digital (DVB) subtitles are available, tune to the TV channel and
press
, select
OPTIONS
to open the list of
Subtitle language
Subtitles. You can only buffer a subtitle language preceded by a
icon.
DVB
53
Download from Www.Somanuals.com. All Manuals Search And Download.
the TV guide comes from the Internet, you can select the date
at the top of the page and press
17
.
OK
2 - With the programme highlighted, press
adds some time buffer at the end of the programme. You can
add some extra buffer if needed.
. The TV
Record
Recording
17.1
3 - Select
and press
. The programme is scheduled
OK
Schedule
for recording. A warning will appear / will be
What you need
To record a TV programme you need . . .
shown automatically when overlapping recordings are scheduled.
If you plan to record a programme in your absence, remember
to leave the TV switched to standby and the USB Hard Drive
switched on.
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV (the channels you
watch with Watch TV)
• to receive channel information for the built-in TV guide (from
the broadcaster or from the Internet)
List of recordings
For more information, press
and look up
USB
Keywords
To view the list of recordings and scheduled recordings, press ,
.
Hard Drive, installation
select
and press
.
OK
Recordings
In this list, you can select a recording to watch, remove recorded
programmes, adjust the end time of an ongoing recording or
check the free disk space. Also in this list, if the TV guide comes
from the Internet, you can schedule a recording for which you
set the beginning and end time yourself, as a timed recording
not linked to a programme. To set a timed recording, select
17.2
Record a programme
Record now
at the top of the page and press
. Set
OK
Schedule recording
the channel, date and time span. To confirm the recording,
select and press
To record the programme you are watching, press (Record)
on the remote control.
.
OK
Schedule
Remove a scheduled recording
To remove a scheduled recording, select the upcoming
recording in the list and press
. Alternatively, you can select
OK
the scheduled recording and press
and select
OPTIONS
.
Cancel recording
If you receive TV guide information from the Internet, you can
adjust the end time of the recording in the pop-up window
before you confirm the recording.
If you receive TV guide information from the broadcaster, the
recording starts immediately. You can adjust the end time of the
recording in the list of recordings.
Specifics
• While recording a programme, you can watch a previously
recorded programme.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV broadcast.
• To Record, broadcasters need a reliable clock setting. If you
reset the TV clock manually, recordings may fail.
• The Audio Description audio (commentary) for the visually
impaired cannot be recorded.
• You can record the digital (DVB) subtitles of channel. You
cannot record subtitles that come from Text services. To check
if digital (DVB) subtitles are available, tune to the TV channel
To stop recording, press (Stop).
Schedule a recording
You can schedule a recording of an upcoming programme for
today or a few days from today (maximum of 8 days away).
and press
, select
OPTIONS
to open the
Subtitle language
1 - To schedule a recording, press
On the TV guide page, select the channel and programme you
wish to record.
.
TV Guide
list of Subtitles. You can only record a subtitle language
preceded by a icon.
DVB
You can enter the channel number to jump to the channel in
the list.
Press (Right) or (Left) to scroll through the programmes of
a channel.
To change the date of the list, press
and select
OPTIONS
. In the list, select the day you want and press
. If
OK
Change day
54
Download from Www.Somanuals.com. All Manuals Search And Download.
17.3
Watch a recording
To watch a recording . . .
1 - Press , select
and press
.
OK
Recordings
2 - In the list, select the recording and press (Play) to start the
playback. You can use the (Forward), (Rewind),
(Pause) or (Stop) keys on the remote control.
Expired recording
Broadcasters can limit the number of days a recording can be
viewed. A recording in the list can show the number of days
before it expires.
Failed recording
When a scheduled recording was prevented by the broadcaster
or when the broadcast was interrupted, a recording is marked as
.
Failed
Delete a recording
To delete a made recording, select the recording in the list,
press
and select
.
OPTIONS
Delete recording
For more information, press
and look up
Keywords
Record
.
a programme
55
Download from Www.Somanuals.com. All Manuals Search And Download.
If the TV camera is not connected, Skype will not start.
18
Skype
18.1
Sign in
Sign in to Skype with your
don't have a Skype Name yet, you have to create a new Skype
account.
and
. If you
password
Skype Name
About Skype
With
you can make video calls on your TV for free.
Skype™
To sign in to Skype…
You can call and see your friends from anywhere in the world.
Talk to your friends while watching them on the big screen of
your TV.
1 - Press to open the Home menu.
2 - Select
and press
to start Skype and open the Sign
Skype
OK
in page.
3 - Select the
text field and enter your Skype
Skype Name
18.2
Name. To open the on screen keyboard, select the text field
and press . If you have signed in before, press and
OK
LIST
What you need
To make a video call on Skype, you need the separately sold
Philips PTA317
good connection to the Internet.
select your Skype Name. The TV remembers the 5 last Skype
Names that signed in.
4 - Select the
text field and enter your password.
Password
TV camera with a built-in microphone and a
5 - When done, select
and press
.
OK
Sign in
You are signed in if the Skype menu opens on screen.
Before you can start Skype, the TV must have a good quality
connection to the Internet. You can connect your TV either
wireless or wired.
Need help?
If you have forgotten your Skype Name or password, or are
having problems signing in, please visit www.skype.com/support
For more information, press
and look up
Keywords
.
Network, wireless
Skype account
New Skype account
To use Skype, you need to create a Skype account for yourself
or for your family. You can create a new account for Skype on
your TV or on your computer.
If you don't have a
and
yet, you can
Password
Skype Name
create a new Skype account on your computer. Once you have
successfully created the new account, you can use your Skype
Name and password to sign in on TV. To create a Skype
account on your computer, go to www.skype.com
Skype Credit or Skype Subscriptions
With Skype, for a little cost, you can also call phones or mobile
phones. Using your computer you can buy Skype Credit or take
a Skype subscription at www.skype.com
If you have a remote control with an integrated keyboard or
have a USB keyboard connected to the TV, you can create a
new Skype account on your TV.
No emergency calls
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
To create a new account on your TV…
1 - On the Skype
page, select
and
Sign in
Create a new account
and press
press
.
OK
18.3
2 - On the next menu, select
.
OK
Open browser
You can create your new account on this web page.
4 - When Skype confirms that your new account is successfully
Start with Skype
Install the camera
created, leave the web browser and go back to the
of Skype on TV.
page
Sign in
Connect the TV camera cable to one of the USB connections
on the TV.
Bend the small clamp as shown in the illustration below and
position the camera on the top of the TV.
5 - Enter your
and
to sign in.
Password
Skype name
Skype Name
A Skype Name must begin with a letter, upper or lowercase. It
must have 6 to 32 characters and can contain numbers. A Skype
Name cannot contain a space.
Point the camera to the position you usually sit at. When you
are making a Skype call, you can pan, tilt or zoom in or out the
camera image.
Password
Your password must have 6 to 20 characters and must at least
contain one letter or one number. It cannot contain special
characters like a trademark, bullet or euro sign. A Skype
You can position the camera anywhere you want but it is
recommended to put it away from the speakers of the TV.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
password cannot contain a space.
18.4
If you don't have a Skype Name and Password yet, you can
create a new account on the sign in page on TV.
Skype menu
When you have signed in successfully, Skype opens the
Skype
1 - On the sign-in page, select New account and press OK.
2 - Create your new account.
.
menu
• Full name
Enter your full name.
• Skype name
Enter a name as your Skype name. Your Skype Name will be
shown in the list of contacts of other Skype users. A Skype
Name must begin with a letter, upper or lowercase. It must have
6 to 32 characters and can contain numbers. A Skype Name
cannot contain a space.
The Skype menu items are…
•
My profile - your Skype name
To view or modify your Skype profile. Select your
Skype Name
and press
.
OK
•
In
People
People
, you can start making a Skype call and manage your
• Password
contacts.
Enter your password. Your password must have 6 to 20
characters and must at least contain one letter or one number. It
cannot contain special characters like a trademark, bullet or euro
sign. A Skype password cannot contain a space.
• Email
Enter your email address.
3 - Read and accept the Skype Terms of Use.
4 - If your new account was accepted, you are signed in.
•
Call phones
In
, you can call a landline or a mobile phone
Call phones
number by dialing the number on a dial pad. You must have
or a to call a phone number.
Skype Credit
You can't select
not connected.
Skype subscribtion
if a camera and microphone are
Call phones
You can edit or complete your Skype profile on your computer.
Start Skype on your computer, sign in with your Skype Name
and Password and open your Skype profile. You can change
your profile picture, add a mood message or set the privacy
settings.
•
In
History
History
, you can view your missed and former calls or view
.
Contact requests
•
In
Settings
Settings
Microsoft account
, you can change your password, set your privacy and
voicemail settings or view your blocked contacts and much
more.
If you have a Microsoft account, you can use this account to sign
in to Skype on TV.
To sign in with a Microsoft account…
1 - On the Skype
page, select
•
Sign in
Sign in with Microsoft
. The TV will open the Microsoft
OK
Sign out
and press
.
To sign out of Skype on TV.
account
OK
2 - Select
and press
Next
account sign in web page.
3 - Enter your Microsoft account email and password.
4 - Select the button and press
.
OK
Submit
18.5
My profile
In
, you can edit your personal profile for Skype.
My profile
No emergency calls
•
Public
View or change your profile information that can be viewed by
your contacts.
No emergency calls with Skype
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
•
Phone
You can enter or change your home, office or mobile phone
number here.
•
Private
57
Download from Www.Somanuals.com. All Manuals Search And Download.
View or change your email address, check the amount of credit
you have or view the subscription information, or write a
message that reflects your mood.
Add a phone number
In , the list of your contacts, you can add a phone number
People
as a contact. You can call a phone with a Skype voice call. You
need Skype Credits to make a phone call.
•
Profile picture
To add a phone number…
If you did not upload a profile picture with your computer yet,
you can select one of the available avatars as Profile picture
here.
1 - On the
page, press
.
Contacts
OPTIONS
2 - Select
and press
.
OK
Add a Phone Number
3 - Enter the name of your contact. To open the on screen
keyboard, press . When you're done, press
.
OK
OK
•
Online status
4 - Enter the phone number of your contact. Always start with a
You can change your online status. Select the status you want
your contacts to see when you are online.
country code (e.g. +31 for The Netherlands). Do not use the
double zero. When you're done , press
. The name of your
OK
phone number contact will appear in your list.
18.6
Accept a contact request
People
When you receive a
, a small icon will show
Contact request
Your contacts
next to
in the
.
History
Skype menu
In
, you can find the list of your
People
.
Skype contacts
To accept a contact request…
Your contacts are shown with their
online and available for a Skype call when a green dot is shown
next their name.
. Contacts are
Skype Name
1 - In the
2 - Select
and press
, select
and press
.
Skype menu
History
OK
. Select the request
OK
and press
Contact requests
. Skype will ask you to accept this contact. If you
OK
accept, the contact will appear in your contact list.
You can use the text box in the top left corner of the contact
page to search for a contact within your contact list. Or, simply
scroll down the list to find the contact you want.
Block a contact
You can
a Skype contact. A blocked contact will be
Block
Add a contact
unable to contact you on Skype. A blocked contact will not be
notified, you will appear as being offline in the contact list of the
blocked contact. You can always unblock contacts you have
blocked.
Add a Skype contact
In
, the list of your contacts, you can add a new Skype
People
contact.
To block a contact…
1 - On the
2 - Press
contact is blocked.
page, select the contact you want to block.
Contacts
Add a Skype contact
and select
and press
. The
OK
OPTIONS
Block
If you know the Skype Name or email of a friend, Skype can
easily find your contact. If you do not know their Skype Name
or email, you can also try to look for them by name.
To unblock a contact…
1 - Select a contact that is blocked.
2 - Press and select
To add a Skype contact…
and press . The
OK
OPTIONS
contact is unblocked.
Unblock
1 - On the
page, press
.
Contacts
OPTIONS
2 - Select
and press
.
OK
Add Skype Contact
To view a list of blocked contacts…
3 - Enter a
or email address of your new contact.
Skype Name
You can also try to enter a name. To open the on screen
keyboard, press . When you're done, press
4 - Skype will search for the contact you are looking for and will
1 - In the
2 - Select
contacts you have blocked.
, select
and press
.
Skype menu
Settings
OK
. The list will show all
OK
.
OK
OK
and press
Blocked contacts
show the search results.
5 - Select the contact you want and press
to send a contact
OK
request.
6 - Write the request and press
. Skype will send the request
OK
message to your new contact. If the contact accepts the request,
the Skype Name of the new contact will appear in the your list
and you can call your contact on Skype.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - On the
page, select the contact you want to call.
Contacts
Remove or rename
2 - Select
and press
. If your contact is on Skype and
OK
Call
answers the call, you can talk to your contact.
3 - To end the call, select and press
You can
or contacts.
Remove Rename
.
OK
End call
To remove a contact…
A contact can add you to a voice call with more than one
participant. You cannot add an extra participant yourself.
1 - On the
page, select the contact you want to
Contacts
remove.
2 - Press
and select
and press
. The
OK
OPTIONS
Remove
contact is removed from the list.
Calling phones
To rename a contact…
With Skype you can also call landline phones and mobile
phones. To call phones you need to buy Skype Credit or a
Skype subscription.
1 - On the
rename.
page, select the contact you want to
Contacts
2 - Press
and select
and press .
OK
OPTIONS
3 - Enter the new name for this contact in the text field. To
open the on screen keyboard, press . When you're done,
Rename
To call a phone…
OK
1 - On the
page, select a phone number contact.
Contacts
press
.
OK
2 - Select
and press
. You must have
Skype Credits
Call
OK
available or have a Skype subscription to make a call with a
phone number. If your contact answers the phone, you can talk
to your contact.
3 - To end the call, select
and press
.
OK
18.7
End call
With Skype, you can also call a phone number directly. You can
enter the phone number with the dial pad.
Calling on Skype
To open the dial pad…
Video or voice call
1 - In the
, select
and press
Show Dial Pad
.
Skype menu
Call phones
OK
Make a Video call
2 - If the dial pad is not on screen, select
and
press
.
OK
3 - Dial the phone number. You can navigate to the numbers
and press or use the number keys on the remote control.
Make a
screen.
to call and see your friends on your TV
Video call
OK
To make a Video call…
No emergency calls
1 - On the
page, select the contact you want to call.
Contacts
Skype is not a replacement for your telephone and cannot be
used for emergency calling.
2 - Select
and press
. If your contact is on Skype,
OK
Video call
has a Skype camera connected and answers the call, you can see
this person on TV.
3 - To end the call, select
and press
.
OK
End call
Receiving a call
When your Skype camera is switched on, a blue indicator LED
lights up. You can check what your contact can see in the small
screen on the bottom right of the TV screen.
When you are signed in to Skype and watching TV, a ringtone
and a message on screen will alert you of an incoming call. The
message will show who is calling and you can answer or decline
the call.
To switch the Skype camera off, select
and press
Video Off
. To switch it back on, select
and press
OK
.
OK
Video On
To answer the call, select
and press
.
Answer with video
OK
To mute your microphone, select
and press
.
OK
. To
Mic Off
and press
OK
switch it back on, select
Mic On
To answer the call with the camera switched off, select
Answer
and press
.
OK
with audio
While you are making a video call, you can change the viewpoint
of the camera.
For more information on changing the viewpoint, press
To decline the call, select
and press
.
OK
Decline call
and look up
.
Keywords
Skype, camera zoom, pan and tilt
History
Make a Voice call
Make a
In the
page of the Skype menu, you will find a list of all
History
calls you made, including the calls you missed. You can also see
new contact requests and listen to voicemails.
to call without video, with the camera
Voice call
switched off.
To view a list, select
,
,
or
All calls Missed calls Incoming calls
To make a Voice call…
59
Download from Www.Somanuals.com. All Manuals Search And Download.
and press
.
OK
Outgoing calls
18.8
To view new contact requests, select
and
and
Contact requests
Skype credit
On Skype, you can buy Skype Credit or take a Skype
subscription. With Skype Credit or a Skype subscription
available, you can call landline phones and mobile phones with
your TV.
press
.
OK
To view and listen to your voicemails, select
Voicemails
press
.
OK
For how long your Skype events are kept in this history list
depends on the amount of contacts you have and how
intensively you use Skype.
Buy Skype Credit
To buy Skype Credit or take a Skype subscription, sign in to
Skype on your computer.
The Skype Credit you buy will be available when you sign in to
Skype on your TV.
Voicemail
About Voicemail
The amount of credit or the subscription information is shown
on each page where you can make a phone call.
If someone calls you on Skype and you do not take the call, he
or she can leave a spoken message on your
you call a contact and they can't take the call, you can send a
Skype voicemail to your contact.
. If
Skype voicemail
Skype Credit low
You will be notified if your credit is too low to make a phone
call.
To send a voicemail or to receive a voicemail, you - or your
contact - must set up Skype voicemail first. You can set up
Voicemail on your computer. Go to www.skype.com
18.9
When you made voicemail available for you on a computer, set
Skype settings
your voicemail preferences in the
>
>
Skype menu Settings
.
Voicemails
Signing in
You can set Skype to automatically sign in when you select
Skype from the Home menu. You do not need to enter your
Skype Name or password.
Record a Voicemail
When you call a contact and they can't take the call, you can
leave a voicemail.
To sign in when Skype starts…
To record a voicemail…
1 - Sign in to Skype with your account.
2 - In the
3 - Select
, select
and press
and press
.
OK
Skype menu
Signing in
Settings
.
OK
1 - Call a contact. If your call was not answered, Skype will
propose to send a
.
Voicemail
4 - Press (right) to select the check box and press OK to
mark
2 - Select
and speak your message.
Yes
.
Sign me in when Skype starts
3 - To stop recording, select
and press
.
OK
End call
Play a Voicemail
Change password
A contact can send a voicemail message to you. If a voicemail
was sent to you, a small icon will show on the Skype menu. You
can play a voicemail from the History page.
You can change your current Skype password and enter a new
password for your Skype account.
To change your password…
To play a voicemail…
1 - Sign in to Skype with your account.
1 - In the
, select
and press
OK
.
Skype menu
History
2 - In the
, select
and press
.
OK
Skype menu
Settings
2 - Select
and press
.
OK
Voicemails
3 - Select
.
Change password
3 - Select the voicemail you want to play and press
. You can
OK
4 - Press (right) to select
and enter your
Current password
listen to a voicemail as many times you want. To manage your
voicemails, press
current password. Press
screen keyboard.
first if you want to use the on
OK
.
OPTIONS
5 - Press (down) to select
and enter you new
New password
password.
6 - Press (down) again to select
enter the new password.
7 - Press (down) again to select
and re-
Repeat new password
to send the new
Apply
60
Download from Www.Somanuals.com. All Manuals Search And Download.
password for confirmation.
If you allow a contact to send you a voicemail when you can't
answer the call within 15 seconds and you are in another call,
check the box of
.
I am already in a call
If you allow a voicemail, when you declined a call, check the box
of
.
I decline an incoming call
Video
To set your preferences for voicemail…
You can set Skype to restrict the use of video in Skype calls.
1 - Sign in to Skype with your account.
With
, you can set Skype to
Automatically receive video from
2 - In the
3 - Select
, select
and press
and press
.
OK
Skype menu
Voicemail
Settings
.
OK
automatically receive and show video from
my contact list only
,
Anyone People in
or from
.
No one
4 - Press (down) or (up) to select a check box. Press
OK
to check or uncheck.
With
, you can set Skype to send out
Show that I have video to
your video to
or to
.
People in my contact list only
No one
To set the Video settings…
1 - Sign in to Skype with your account.
Call forwarding
2 - In the
, select
and press
.
OK
Skype menu
Settings
3 - Select
.
Video
Never miss a Skype call with
.
Call Forwarding
4 - Press (right) to select the radio buttons and press
to
OK
mark or unmark.
If you are not online or can't take the call, you can forward a
Skype call to any phone or mobile phone. You can also forward
a Skype call to another Skype account. You can set up to three
phone numbers or Skype Names in order of preference to
forward calls to. You need Skype Credit or a Skype subscription
to forward calls to phones. Forwarding Skype calls to other
Skype accounts is free of charge. For more information on call
forwarding, go to www.skype.com/support
Privacy
You can set Skype to restrict incoming Skype calls.
You can allow calls from
or from
From people in my
Anyone
.
contact list only
To set the Privacy settings…
1 - Sign in to Skype with your account.
To set up call forwarding…
1 - Sign in to Skype with your account.
2 - In the
, select
and press
.
Skype menu
Settings
OK
2 - In the
, select
and press
.
OK
Skype menu
Settings
3 - Press
to check the check box for
OK
Forward calls when I
3 - Select
.
Privacy
.
am not on Skype
4 - Press (right) to select the radio buttons and press
mark or unmark.
to
OK
4 - In the entry fields below, enter the phone numbers or Skype
Names from your contact list in order of preference to forward
your calls to. Always add the country code for phone numbers.
5 - Change, if necessary, the amount of seconds before Skype
forwards your call.
6 - Select
to store your
setup.
Call Forwarding
Save
Blocked contacts
You can view a list of all your Blocked contacts.
To view the list…
1 - Sign in to Skype with your account.
2 - In the
3 - Select
, select
and press
.
Camera zoom, pan and tilt
Skype menu
Settings
OK
. To manage your
OK
and press
Blocked contacts
You can set the viewpoint of your camera. You can zoom in or
out, pan or tilt the camera frame. While you are in a Video call,
you can set the camera viewpoint.
blocked contacts, press
.
OPTIONS
To set the camera viewpoint…
Voicemail
1 - Start a
and wait until the call is ongoing.
Video call
2 - Press (right) to select the icon above the small screen and
press . A bar with colour key functions appears.
You can set some preferences for sending voicemails.
If you allow a contact to send you a voicemail when you can't
take the call, check the box of
OK
3 - To shift (pan) the camera frame, press (left) or
(right). To tilt the camera frame, press (up) or (down). To
Send unanswered calls to
. Leave the box unchecked, if you do not want to
voicemail
zoom in, press
. To zoom out, press
.
Zoom out
Zoom in
receive voicemails.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - Press
to store the camera viewpoint and to go
Done
back to your Skype call.
18.10
Sign out
When you sign out of Skype, you are signing out your Skype
account. Your Online status will change to
contacts will not be able to call you.
. Your
Offline
To sign out…
1 - Press
from anywhere within Skype to return to the
Back
.
Skype menu
2 - Select
in the Skype menu and press
.
OK
Sign out
The TV will ask you to quit Skype or to use Skype with another
Skype account.
18.11
Quit Skype
When you sign out of Skype, the Skype application on TV is still
active. Another Skype account can sign in or you can create a
new account. To stop the Skype application on TV, you must
quit Skype.
18.12
Terms of use & Privacy Policy
Read the Terms of Use of Skype at www.skype.com/go/tou
Also read the Privacy Policy at www.skype.com/go/privacy
62
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Switch on Smart TV parental control by selecting
and
Enable
19
then press
.
OK
2 - Enter an unlock PIN code of your choice.
3 - Confirm your PIN code.
Adult 18+ rated apps are now locked. To open a locked app,
Smart TV
19.1
select the app and press
4-digit code.
. The TV will ask you to enter your
OK
About Smart TV
Connect this
to the Internet and discover
Philips Smart LED TV
19.4
a new world of television. You can make a wired connection to
your router or you can link up wirelessly with Wi-Fi.
Smart TV Apps
With the TV connected to your home network, a smartphone
can show a photo on TV, you can play videos stored on your
computer or control the TV with your tablet.
Open Smart TV
The Smart TV start page is your link to the Internet. You can
rent movies online, read newspapers, watch videos and listen to
music, also shop online, open your social network page
(Facebook, Twitter, . . .) or watch TV programmes when it suits
you with Online TV. To do this, you open Apps - Internet sites
which are tailored for TV. With your TV connected to the
Internet, you can open Smart TV.
With your TV connected to the Internet, you can watch a rental
video from an online video store, read the online TV guide or
record your favourite TV show on a USB Hard Drive. The Smart
TV Apps add to the fun with all sorts of entertainment and
convenient services.
19.2
Open Smart TV
What you need
To open the Smart TV start page, press
.
Smart TV
Alternatively, you can press , select
and press
.
OK
Smart TV
To enjoy
you must connect the TV to a router
Smart TV Apps
with a high-speed (broadband) connection to the Internet. You
can use a home network connected to the Internet. You do not
need a computer.
The TV connects to the Internet and opens the Smart TV start
page. This may take a few seconds.
Close Smart TV
For more information, press
and look
Keywords
To close the Smart TV start page, press and select another
activity.
up
.
Network
Tip
TP Vision Europe B.V. bears no responsibility regarding the
content and the quality of the content provided by the content
service providers.
To enter text or to navigate an Internet page more easily, you
can consider to connect a USB keyboard and a USB mouse to
the TV.
For more information, press
and look up
USB
Keywords
or
.
keyboard USB mouse
Smart TV start page
1 - Now on your TV
2 - Your Apps
19.3
3 - App gallery
4 - Internet
Setup Smart TV
5 - Recommended Apps
6 - Search
7 - Colour keys for control
The first time you open Smart TV, you need to configure your
connection. Read and agree to the terms and conditions to
continue. If you do not want to set up Smart TV, press .
Your Apps
Register
You start Apps from the Smart TV start page. If the start page
does not hold any Apps yet, you can add Apps from the App
gallery.
To register with Club Philips . . .
1 - Select
and press
.
OK
Register
2 - Enter your email address, select
3 - Confirm the email address.
and press
.
OK
Continue
App gallery
In the App gallery you find all available Apps.
Parental control
To lock Adult 18+ rated apps . . .
Internet
63
Download from Www.Somanuals.com. All Manuals Search And Download.
The Internet App opens the World Wide Web on your TV.
On your TV, you can view any Internet website but most of
them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not available
on your TV.
On an App page, press
and select
.
Security info
OPTIONS
If a lock is shown next to the loading animation on the
bottom of the screen while loading a page, the transfer is
secured.
Feedback on an App
- Internet pages are shown one page at a time and full screen.
Select the App and press
like' button and send a suggestion or remark to us. You can also
report an App malfunction.
to select a 'like' or 'don't
Feedback
Recommended Apps
In this window, Philips presents a range of recommended Apps
for your country, Apps for Online TV or a selection of rental
movies from Video stores. You can select and open them from
the Recommended Apps window.
Manage your Apps
In the list of Apps on the Smart TV start page you can . . .
•
Remove an App
Search
To remove an App from the list, select the App icon and
With Search, you can search the App gallery for relevant Apps.
press
. The App is still available in the App gallery.
Remove
Enter a keyword in the text field, select and press
to start
•
OK
Move an App
searching. You can enter names, titles, genres and description
keywords to search.
Alternatively, you can leave the text field empty and search for
the most popular searches/keywords for a range of categories. In
To reposition an App in the list, select the App icon,
press and use the arrow keys to reposition the App.
Move
to confirm the position.
Press
OK
Lock an App
To lock an App, select the App icon and press
•
the list of found keywords, select a keyword and press
search for items with that keyword.
to
.
Lock
OK
When you lock an App, you must enter the 4 digit PIN code
you set for Parental control when you configured Smart TV. In
the list, a locked App is marked with a lock .
To unlock an App, select the App icon and press
You must enter the 4 digit PIN code to unlock.
.
Unlock
Open an App
To open an App, you must add it to your list of Apps in the
Smart TV start page first.You can add Apps to your list from the
App gallery.
The list of your Apps on the Smart TV start page can be several
pages long. Use the arrow keys to go to the next or previous
App gallery
page. Alternatively, press (Next page) or (Previous
+
-
Open the
in Smart TV to browse the Apps, the
App gallery
page).
collection of tailored websites for TV.
Open an App
Find the App for YouTube videos, a national newspaper, an
online photo album, Facebook, Twitter, etc. There are Apps to
rent a video from an online video store and Apps for watching
programmes you missed. If the App gallery does not hold what
you are looking for, try the World Wide Web and surf the
Internet on TV.
To open an App . . .
- Press and select
- On the start page, select an App icon and press
.
1
2
Smart TV
.
OK
In an App, press to go back 1 step or page.
Close an App
To close an App and return to the Smart TV start page, press
Smart TV.
Rental video Apps
Reload an App page
With the video store Apps in Smart TV, you can rent your
favourite movie from an online rental video store. You can pay
securely with your credit card.
If an App page did not load properly, press
and
OPTIONS
select
to reload the page.
Reload
Rent a movie
Zoom
1 - Open a Video store App in your list of Apps or select a
recommended video on the Smart TV start page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play) and (Pause) keys.
To zoom in on an App page . . .
- Press
and select .
Zoom page
1
2
3
OPTIONS
- Use the slider bar to set the zoom level.
- Return to normal view by resetting the slider bar.
View security info
Most Video stores ask you to create a login account.
You can check the security level of an App page.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
19.6
Streaming video
With this TV, you can watch rental movies sent as a streaming
video format. You can almost instantly watch the movie. You
might need a USB Hard Drive to store some video buffer. If you
have a USB Hard Drive connected, you can also download
rental movies from video stores that offer movie downloading
only. You can pause or restart a downloaded rental movie.
Consult the video store regarding the rental duration of rental
movies.
Reset Smart TV
To reset your connection with Smart TV, clear the Internet
memory on the TV.
You will clear your Philips Smart TV registration and parental
rating setting, your video store app logins, all Smart TV app
favourites, Internet bookmarks and history.
To clear the Internet memory . . .
- Press and select
- Select
and press
>
.
1
2
Setup
OK
and
Network settings Clear Internet memory
Internet traffic
Streaming or downloading many videos may exceed your
monthly Internet traffic limit.
press
.
OK
Online TV
With the Online TV App on the Smart TV start page*, you can
watch TV programmes you missed or watch programmes
whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press
.
Smart TV
2 - On the start page, select the
icon and press
Online TV
.
OK
3 - Select a programme on the page and press
to start
OK
watching. You can use the (Play) and (Pause) keys.
List per broadcaster
To view the Online TV programmes ordered by broadcaster,
press
.
All broadcasters
Select a broadcaster and press
.
OK
* If available in your region.
19.5
Multi view
While you are on a Smart TV App or the Internet, you can
watch the current TV channel. opens a small screen
Multi view
for the TV channel next to the Smart TV screen.
To open Multi view…
1 - Press
to open Smart TV.
SMART TV
2 - Press
to open the small screen.
MULTI VIEW
3 - Press or to change the TV channel in the small
+
–
screen.
The Multi view screen cannot display video in 3D or in UHD.
With Multi view open, you cannot use the Remote Control
Pointer nor use a connected USB mouse in the Smart TV
screen.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Stream a TV channel
Multi room
20.1
With Multi room, you can watch the current TV channel or
open the channel list of the other TV. If you select a channel
from the list, the other TV will also switch to the channel you
selected. If the other TV has a build-in satellite tuner with
installed channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You cannot
switch channels while the other TV is recording, in Pause TV
mode or using Skype.
About Multi room
With Multi Room you can watch a TV programme that comes
from another TV in your home. The programme is streamed
from one TV to the other. You can stream a programme to a
TV that has no antenna connection or has no Smart card
subscription of its own. You can also stream a recorded
programme from a TV with a connected Hard Drive.
To watch a TV channel from the other TV . . .
- Make sure the other TV is in standby* or switched on.
1
2
- On this TV, press
, select
SOURCES
Browse network
and press
.
OK
The TV that streams the programme to the other TV, must be
switched on and must tune to the channel or play the recording.
- If the TV is not yet connected to your home network, the
3
network installation will start automatically. If the TV is already
connected, go to step 4.
Streaming a TV programme with Multi Room will reduce the
picture resolution to 720p maximum. You cannot stream radio
channels. Some broadcasters protect their programmes to
prevent this kind of streaming.
- In the
menu, select the name of the other
Browse network
4
TV and press
. If you have several TVs in your home, you
OK
might want to change the name of the other TV. You can do
that on the TV itself.
- Select what you want to watch from the other TV . . .
5
20.2
• to watch the current channel of the other TV, select
Current
and press
.
OK
channel
What you need
To stream a TV programme from one TV to another, the
programme must come from a digital TV channel.
• to open the channel list of the other TV, select
press (Right).
and
Watch
Watch
Watch TV
• to open the satellite channel list of the other TV, select
and press (Right).
satellite
• to open the list of recordings* on the other TV, select
and press (Right).
Both TVs must be connected to your wireless home
network. For more information, press
and look
Keywords
recordings
• you can switch channels with and . You cannot
up
.
Wireless Network
+
-
switch channels when the other TV is recording, in Pause TV
mode or using Skype.
Also, both TVs must have a Philips model number that ends
with an 8 or higher - e.g. xxXXXxxx . It might be necessary to
8
update the older TV with its latest software. On the older TV,
read the Help chapter on updating software.
* To switch on the other TV from standby or to watch its
recordings from a connected HDD, both TVs must have a type
number that ends with an 8 or higher - e.g. xxXXXxxx8 or
xxXXXxxx9.
Make sure that both TVs have the setting
Switch on with Wi-Fi
switched on in the TV setup.
(WoWLAN)
To check this setting on this TV…
1 - Press , select and press
.
OK
Setup
Network settings Switch on with Wi-Fi
, and press
TV name
2 - Select
select
>
and
.
On
OK
To change the TV name . . .
3 - Press
repeatedly if necessary, to close the menu.
BACK
Press >
>
>
.
Setup Network settings TV network name
20.3
Using Multi room
First time use
When you start Multi room for the first time, switch on both
TVs.
Once this TV made a connection with the other TV, the other
one will appear automatically in the
even when it's in standby.
menu
Browse network
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic channel update, do a digital reception test or install
analogue channels manually.
21
Settings
21.1
Languages
Press
and look up
and look up
or .
Audio language Subtitles
Keywords
Universal access
Press
Setup menu
for visually
Universal access
Keywords
and hearing impaired users settings.
Quick picture and sound settings
Channel installation
With
you can set your basic
Quick picture and sound settings
picture preferences in a few easy steps. The settings you made
are stored under the . You can return to
Press
and look up
or
Automatic channel update
Keywords
-
Picture style Personal
. Also look up
for
Channel update message
Manual installation
your picture preference if some settings were changed. You can
set a preferred picture setting for every TV activity or connected
device individually.
installing analogue channels or
connection.
to switch the antenna
DVB
Child lock
To return to your preferred picture setting, while watching a TV
Press
and look up
.
Child lock
Keywords
channel, press , select
and select
.
Personal
Picture style
To set a Quick picture setting . . .
1 - Press , select and press
.
OK
Setup
Quick picture and sound settings
through the steps and finish.
Search for satellite
2 - Select
and press
. Go
OK
Press
and look up
.
Satellite, installation
Keywords
For more information, press Keywords and look up
Picture
.
style
Satellite settings
Languages
TV settings
Press
and look up
or .
Audio language Subtitles
Keywords
Channel installation
Press
In the
menu you can set all settings. The item
in the menu holds a collection of settings like
TV settings
General settings
,
,
,
Menu language Sleep timer Switch off timer Universal access
and look up
Keywords
or
Satellite, automatic channel
or
and more.
update Satellite, channel update message Satellite,
For more information, press
you need.
and look up the topic
Keywords
.
automatic update options
Child lock
Press
and look up
.
Satellite, channel lock
Keywords
Search for channels
With
, you can update your current channel
Search for channels
Connect to network
list and possible newly found channels are added to the channel
list. You can also do a re-installation of all channels. A channel
update or a channel reinstall may take some time.
Press
and look up
or
Network, wireless
Keywords
.
Network, wired
Press
and look up
or
Keywords
Channel, update Channels,
.
re-install
Network settings
Press
and look up
.
Network, settings
Keywords
Channel settings
In the
menu, you can set your language
Channel settings
preferences or set
and
for
Audio description
Hearing impaired
people who are hearing and visually impaired. You can set an
age rating to prevent children from watching a rated programme
and set or change your Child lock code. You can switch on the
67
Download from Www.Somanuals.com. All Manuals Search And Download.
5 - Press , repeatedly if necessary, to close the menu.
Update software
For more information on adjusting individual picture settings,
press
and look up
.
Keywords
Picture
Press
and look up
Software, Internet
Keywords
or
.
update Software, USB update
or
Home Shop
If the Picture style is switched back to
every time you
Vivid
switch on the TV, the TV location is set to
meant for in-store promotion.
To set the TV for Home use . . .
. A setting
Shop
Update software
Press
and look up
.
Software, USB update
Keywords
1 - Press and select
and press
.
Setup
OK
2 - Select
>
>
and press
TV settings General settings Location
.
OK
Software settings
3 - Select
and press
.
OK
Home
4 - Press , repeatedly if necessary, to close the menu.
Press
and look up
.
Software, current version
Keywords
Picture settings
Watch demo
Colour
With
in menu, you can watch some demonstration
Demo
videos of some of the picture quality features of your TV.
With
, you can adjust the colour saturation of the
Colour
picture.
21.2
To adjust the colour . . .
1 - Press and select
and press
.
OK
Setup
Picture
2 - Select
>
>
.
TV settings Picture Colour
3 - Press (right) and adjust the value with (up)
or (down).
Picture style
4 - Press , repeatedly if necessary, to close the menu.
For easy picture adjustment, you can select a preset setting with
.
Picture style
1 - While watching a TV channel, press , then select
Picture
Contrast
.
style
2 - Select a style and press
.
OK
With
, you can adjust the contrast of the picture. If you
Contrast
are watching 3D pictures, this setting is switched to
.
3D contrast
The available Picture styles are . . .
To adjust the contrast . . .
•
•
•
•
•
- Your preferences made in Quick picture settings
- Ideal for daylight viewing
- Natural picture settings
- Factory standard settings
- Ideal for watching movies
Personal
Vivid
Natural
Standard
Movie
Photo
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
.
TV settings Picture Contrast
3 - Press (right) and adjust the value with (up) or
(down).
4 - Press , repeatedly if necessary, to close the menu.
•
- Ideal for viewing photos
Restore a Style
Sharpness
With a
selected, you can adjust any picture setting
Picture Style
in
>
>
…
Setup TV settings Picture
With
detail of the picture.
, you can adjust the level of sharpness in fine
Sharpness
The selected style will store the changes you made. We
recommend to adjust the picture settings for the style
only.
Personal
To adjust the sharpness . . .
1 - Press and select
and press
.
OK
Setup
>
To restore the style to its original setting…
2 - Select
>
.
TV settings Picture Sharpness
1 - Press and select
, and press
.
Setup
OK
TV settings Picture Picture style
style you want to reset.
3 - Press
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
2 - Select
>
>
and select the
.
Restore Style
4 - Select
and press
. The style is restored.
OK
Yes
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced picture settings
Colour settings
Contrast modes
With
consumption can be reduced by dimming the intensity of the
screen. Choose for the best power consumption or for the
picture with the best intensity.
, you can set the level at which power
Contrast modes
Colour enhancement
With
, you can enhance the colour
Colour enhancement
To adjust the level . . .
intensity and the details in bright colours.
1 - Press and select
and press
.
Setup
>
OK
To adjust the level . . .
2 - Select
>
>
>
TV settings Picture Advanced Contrast
1 - Press and select
and press
.
Setup
>
.
OK
.
Contrast modes
2 - Select
>
>
TV settings Picture Advanced Colour
3 - Press (right) and select
,
,
Best Picture Best Power
>
Colour enhancement
3 - Press (right) and
select
or
Standard Off
.
4 - Press , repeatedly if necessary, to close the menu.
,
,
or .
Maximum Medium Minimum Off
4 - Press , repeatedly if necessary, to close the menu.
Brightness
With
, you can set the level of brightness of the
Brightness
Colour temperature
picture signal. Brightness is a setting intended for expert users.
We recommend non-expert users to adjust the brightness of
With
, you can set the picture to a preset
Colour temperature
colour temperature or select
setting yourself with
temperature
to set a temperature
Custom
Custom colour temperature Colour
and Custom colour temperature are settings
the picture with the
setting.
Contrast
.
To adjust the level . . .
intended for expert users.
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings Picture Advanced Contrast
To select a preset . . .
>
.
Brightness
1 - Press and select
and press
.
Setup
>
.
OK
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
2 - Select
>
>
TV settings Picture Advanced Colour
>
Colour temperature
3 - Press (right) and select
,
or
. Select
Normal Warm Cool
if you want to set a colour temperature yourself.
Custom
4 - Press , repeatedly if necessary, to close the menu.
Video contrast
With
, you can decrease the range of the video
Video contrast
contrast. If you are watching 3D pictures, this setting is switched
to . Video contrast and 3D video contrast are
settings intended for expert users.
Custom colour temperature
3D video contrast
With
, you can set a colour
Custom colour temperature
Custom colour temperature
temperature yourself. To set a
,
To adjust the level . . .
first select
in the
setting to make
Custom
Colour temperature
the
menu available.
Custom colour temperature
Custom
is a setting intended for expert users.
1 - Press and select
and press
.
Setup
>
OK
colour temperature
2 - Select
>
>
TV settings Picture Advanced Contrast
>
.
Video contrast
To set a custom colour temperature . . .
3 - Press (right) and adjust the value with (up) or
(down).
4 - Press , repeatedly if necessary, to close the menu.
1 - Press and select and press
.
Setup
OK
2 - Select
>
>
>
TV settings Picture Advanced Colour
>
.
Custom colour temperature
3 - Press (right).
4 - Select a setting with the arrow keys.
5 - Press to confirm a setting.
Light sensor
OK
6 - Press , repeatedly if necessary, to close the menu.
The
adjusts the picture settings automatically to the
Light sensor
lighting conditions of the room. You can switch Light sensor on
or off.
Contrast settings
To switch on or off . . .
1 - Press and select
and press
.
Setup
OK
2 - Select
>
>
>
TV settings Picture Advanced Contrast
>
.
Light sensor
69
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - Press (right) and select
4 - Press , repeatedly if necessary, to close the menu.
or
On Off
.
3 - Press (right) and
select
,
,
or .
Maximum Medium Minimum Off
4 - Press , repeatedly if necessary, to close the menu.
Gamma
Motion settings
With
, you can set a non-linear setting for picture
Gamma
luminance and contrast. Gamma is a setting intended for expert
users.
Perfect Natural Motion
With
, you can reduce the motion
Perfect Natural Motion
To adjust the level . . .
judder, visible in movies on TV. Perfect Natural Motion makes
any movement smooth and fluent.
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
TV settings Picture Advanced Contrast
.
To adjust the motion judder . . .
>
Gamma
1 - Press and select
and press
.
Setup
>
OK
3 - Press (right) and adjust the value with (up)
or (down).
2 - Select
>
>
>
TV settings Picture Advanced Motion
.
Perfect Natural Motion
3 - Press (right) and
4 - Press , repeatedly if necessary, to close the menu.
select
,
,
or .
Maximum Medium Minimum Off
4 - Press , repeatedly if necessary, to close the menu.
Sharpness settings
Ultra resolution
Game or computer
With
, you switch on a superior sharpness in
Ultra resolution
line edges and contours.
You can switch the TV to the ideal picture setting for gaming or
for using the TV as a computer monitor. There is a different
To switch on or off . . .
setting for
or . If a device has a correct type set
Game Computer
1 - Press and select
and press
.
Setup
>
OK
in the Source menu - Game console or Computer - the TV
switches automatically to the ideal setting when you switch to
the device. If you switch the setting manually, do not forget to
switch it off when you switch to watching TV or another
connected device.
2 - Select
>
>
>
TV settings Picture Advanced Sharpness
.
Ultra resolution
3 - Press (right) and select
4 - Press , repeatedly if necessary, to close the menu.
or .
On Off
To switch the setting manually . . .
Noise reduction
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Picture Advanced Activity style
or . The setting returns to
>
>
.
With
, you can filter out and reduce the level of
Noise reduction
3 - Select
,
Game Computer TV
TV
image noise.
the picture settings for watching TV.
To adjust the noise reduction . . .
1 - Press and select and press
4 - Press , repeatedly if necessary, to close the menu.
.
Setup
OK
2 - Select
>
>
>
TV settings Picture Advanced Sharpness
>
.
Noise reduction
Location
3 - Press (right) and select
,
,
or
Maximum Medium Minimum
If the TV is located in a shop, you can set the TV to display an in
.
Off
store promotion banner. The
automatically. The automatic
is set to
Picture style
Vivid
4 - Press , repeatedly if necessary, to close the menu.
is switched off.
Switch off timer
To set the TV to Shop location . . .
MPEG artefact reduction
1 - Press and select and press
.
OK
Setup
2 - Select
>
>
and press
TV settings General settings Location
With
, you can smoothen the digital
MPEG artefact reduction
.
OK
transitions in the picture. MPEG artefacts are mostly visible as
small blocks or jagged edges in images.
3 - Select
and press
.
OK
Shop
4 - Press , repeatedly if necessary, to close the menu.
To reduce the MPEG artefacts . . .
1 - Press and select
and press
.
Setup
OK
2 - Select
>
>
>
TV settings Picture Advanced Sharpness
>
.
MPEG artefact reduction
70
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - Press and select
and press
.
OK
Setup
21.3
2 - Select
>
>
.
TV settings Sound Treble
Sound
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
Sound style
For easy sound adjustment, you can select a preset setting with
.
Sound style
Surround mode
1 - While watching a TV channel, press , then select Sound
style.
With
, you can set the sound effect of the TV
Surround mode
speakers. If you select
TV will switch to
for 2D viewing, the
automatically when
Incredible surround
Incredible surround 3D
2 - Select a style and press
.
OK
The different Sound styles are . . .
you start watching 3D. If you do not want the TV to switch
automatically, select in
.
Off Auto surround 3D
To set the surround mode . . .
1 - Press and select and press
•
•
•
•
•
•
- Your personal choices made in Personalise sound
- Factory standard
- Ideal for watching movies
- Ideal for listening to music
- Ideal for gaming
Personal
Original
Movie
Music
Game
News
.
Setup
>
OK
TV settings Sound Surround mode
3 - Press (right) and select
2 - Select
>
.
,
or
Stereo Incredible surround
- Ideal for speech
.
Incredible surround 3D
Restore a Sound style
4 - Press , repeatedly if necessary, to close the menu.
With a Sound style selected, you can adjust any sound setting in
>
>
…
Setup TV settings Sound
The selected style will store the changes you made. We
Auto surround 3D
recommend to adjust the sound settings for the style
only
Personal
With
, you can block the TV to automatically
Auto surround 3D
switch to Incredible surround 3D when the TV is switched to
3D.
To restore the style to its original setting…
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Sound Sound style
style you want to reset.
3 - Press
To switch on or off . . .
>
and select the
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Sound Auto surround 3D
3 - Press (right) and select or
>
.
.
Restore Style
.
On Off
4 - Select
and press
. The style is restored.
OK
Yes
4 - Press , repeatedly if necessary, to close the menu.
5 - Press BACK repeatedly if necessary, to close the menu.
Press and look up for adjusting individual
Keywords
Sound
sound settings.
Headphones volume
With
, you can set the volume of a
Headphones volume
connected headphones separately.
Sound settings
To adjust the volume . . .
Bass
1 - Press and select
in the menu bar.
Headphones volume
2 - Press (up) or (down) to adjust the volume.
With
, you can adjust the level of low tones in the sound.
Bass
3 - Press , repeatedly if necessary, to close the menu.
To adjust the level . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
.
TV settings Sound Bass
Advanced sound settings
Auto volume levelling
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the menu.
With
, you can set the TV to automatically
Auto volume levelling
level out sudden volume differences. Typically at the beginning of
adverts or when you are switching channels.
Treble
To switch on or off . . .
With
, you can adjust the level of high tones in the sound.
Treble
1 - Press and select
and press
.
OK
Setup
To adjust the level . . .
2 - Select
>
>
>
TV settings Sound Advanced Auto volume
71
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
ARC
leveling
3 - Press (right) and select
or
On Off
.
4 - Press , repeatedly if necessary, to close the menu.
Audio out format
With
TV to fit the sound processing capabilities of your Home
Theatre System.
you can set the audio out signal of the
Audio out format
TV speakers
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system. With
select where you want to hear the TV sound and how you want
to control it.
, you
TV speakers
For more information, press
and look up
Audio
Keywords
.
Out format
• If you select
• If you select
, you permanently switch off the TV speakers.
Off
, the TV speakers are always on.
TV speakers
Audio out levelling
With
Home Theatre System with the volume of the TV when you
switch over from one to another.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
you can level the sound volume of the
Audio out leveling
• If you select
, the TV sends the TV sound to the
EasyLink
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
For more information, press
and look up
Audio
Keywords
.
Out leveling
• If you select
, the TV will switch on the
EasyLink autostart
audio device, send the TV sound to the device and switch off
the TV speakers.
Audio out delay
With
or selected, you can still
EasyLink EasyLink autostart
switch to TV speakers or device speakers in sound menu.
If you set an Audio sync delay on your Home Theatre System,
to synchronise the sound with the picture, you must switch off
To set the TV speakers . . .
on the TV.
Audio out delay
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Sound Sound output
3 - Press (right) and select
>
.
For more information, press Keywords and look up Audio
,
,
or
Out delay.
Off TV speakers EasyLink
.
EasyLink autostart
4 - Press , repeatedly if necessary, to close the menu.
Audio out offset
To switch speakers directly . . .
1 - While watching TV, press
and select
Picture
OPTIONS
If you cannot set a delay on the Home Theatre System, you can
.
and sound
2 - Select
set a delay on the TV with
.
Audio out offset
and select
or (audio device).
TV Amplifier
Speakers
For more information, press
and look up
Keywords
Audio
3 - Press , repeatedly if necessary, to close the menu.
.
Out offset
Clear sound
Speakers
With
, you improve the sound for speech. Ideal for
Clear Sound
news programmes. You can switch the speech improvement on
or off.
Home Theatre System
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system.
To switch on or off . . .
1 - Press and select
and press
.
OK
Setup
>
You can select where you want to hear the TV sound and how
you want to control it.
2 - Select
>
>
.
TV settings Sound Advanced Clear Sound
3 - Press (right) and select or
4 - Press , repeatedly if necessary, to close the menu.
.
On Off
• If you select
• If you select
, you permanently switch off the TV speakers.
Off
, the TV speakers are always on.
TV speakers
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
HDMI ARC
• If you select
, the TV sends the TV sound to the
EasyLink
If you do not need an Audio Return Channel (ARC) on any of
the HDMI connections, you can switch the ARC signal off.
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select
For more information, press
and look up
HDMI
Keywords
, the TV will switch on the
EasyLink autostart
72
Download from Www.Somanuals.com. All Manuals Search And Download.
audio device, send the TV sound to the device and switch off
the TV speakers.
Hearing impaired
With EasyLink or EasyLink autostart selected, you can still switch
to TV speakers if necessary.
Switch on
Digital TV channels can broadcast special audio commentary
describing what is happening on screen.
To be able to set the visually impaired audio and effects, you
To set the TV speakers . . .
1 - Press and select
2 - Select
and press
.
Setup
>
OK
TV settings Sound Sound output
3 - Press (right) and select
>
.
have to switch on
first.
Audio description
,
,
or
Off TV speakers EasyLink
Also, before you can switch on
, you have to
Audio description
.
EasyLink autostart
switch on
.
Universal access
Audio description
With
4 - Press , repeatedly if necessary, to close the menu.
To switch to speakers directly . . .
, a narrator's commentary is added to
Audio description
the normal audio.
To switch on the commentary (if available) . . .
1 - While watching TV, press .
2 - Select
and select
or (audio system).
TV Amplifier
Speakers
3 - Press , repeatedly if necessary, to close the menu.
1 - With
switched on, press
Universal access
and select
OPTIONS
Universal access.
2 -
Select Audio description and press OK.
TV placement
3 - Select and press
.
OK
On
You can check if an audio commentary is available.
In the Options menu, select and look for an
As part of the first installation, this setting is set to either
or
TV stand Wall mounted
of the TV since then, adjust this setting accordingly for best
sound reproduction.
On a
. If you have changed the placement
Audio language
audio language marked with a .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
and
TV settings General settings TV placement
Speakers / Headphones
press
.
OK
With
, you can select where you want
Speakers / Headphones
3 - Select
or
On a TV stand Wall mounted
and press
.
OK
to hear the audio commentary.
4 - Press , repeatedly if necessary, to close the menu.
On the TV speakers only, on the headphones only or on both.
To set Speakers / Headphones . . .
21.4
1 - Press and select
and press
.
OK
Setup
Universal access
2 - Select
Speakers / Headphones
>
>
>
Channel settings Languages Audio description
and press
.
OK
3 - Select
and press
,
or
Speakers Headphones Speakers + headphones
Switch on
.
OK
4 - Press , repeatedly if necessary, to close the menu.
With
switched on, the TV is set for use for
Universal access
hearing and visually impaired people.
Switch on
Visually impaired
If you did not switch on
during the installation,
Universal access
you can still switch it on in
To switch on Universal access . . .
.
Setup
Mixed volume
You can mix the volume of the normal audio with the audio
commentary.
1 - Press and select and press
.
OK
Setup
2 - Select
and press
3 - Select
>
>
TV settings General settings Universal access
.
OK
On
To mix the volume . . .
and press
.
OK
1 - Press
menu bar.
and select
and press
in the
Universal access
OPTIONS
4 - Press , repeatedly if necessary, to close the menu.
With
switched on in
, the
Universal
Universal access
Setup
2 - Select
.
OK
Mixed volume
option is added in the Options menu.
access
3 - Use or to set the slider bar.
4 - Press to confirm.
OK
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on
(if available) . . .
Audio effects
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
Channel settings Languages Audio description
and press
.
Audio effects
OK
3 - Select
or
On Off
and press
.
OK
4 - Press , repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select
and press
.
OK
Setup
2 - Select
>
>
>
Channel settings Languages Audio description
and press
.
Speech
OK
3 - Select
(audio) or
and press
.
OK
Descriptive
Subtitles
4 - Press , repeatedly if necessary, to close the menu.
Key beep
gives an audio feedback each time you press a key on
Key beep
the remote control. The volume of the beep is fixed.
To switch on Key beep . . .
- Press
, select
OPTIONS
and press
.
OK
1
2
Universal access
.
On
- Select
and select
Key beep
If Universal access does not appear in the Options menu, switch
on in
.
Universal access Setup
For more information, press
and look
Keywords
up
.
Universal access
74
Download from Www.Somanuals.com. All Manuals Search And Download.
22
European energy label
Specifications
22.1
The
informs you on the energy
European Energy Label
efficiency class of this product. The greener the energy efficiency
class of this product is, the lower the energy it consumes.
On the label, you can find the energy efficiency class, the average
power consumption of this product in use and the average
energy consumption for 1 year. You can also find the power
consumption values for this product on the Philips website for
Environmental
Saving energy
your country at
www.philips.com/TV
The
bundle the settings that help the environment.
Eco settings
While you are watching TV channels, press icon, then
select , press
.
OK
Eco settings
End of use
Active settings are marked with a . You can mark or unmark
each setting with the
key.
OK
Disposal of your old product and batteries
Press again to close
.
Eco settings
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
Energy saving
This Picture style sets the picture, in the most ideal energy
conscious setting.
For more information, press
and look up
Picture
Keywords
.
style
Screen off
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
If you only listen to music, you can switch off the TV screen to
save energy.
Select
and press
. To switch the screen back on,
OK
Screen off
press any key on the remote control. (Except key)
Light sensor*
Please inform yourself about the local separate collection system
for electrical and electronic products.
To save energy, the built-in ambient light sensor lowers the
brightness of the TV screen when the surrounding light darkens.
The built-in light sensor automatically adjusts the picture, to the
lighting conditions of the room.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
* Only for TVs with light sensor
Switch off timer
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.
If you do not press a key on the remote control during a 4 hour
period, or if the TV receives no signal for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, deactivate the automatic switch off.
Please find out for yourself about the local rules on separate
collection of batteries because correct disposal will help to
prevent negative consequences for the environment and human
health.
In addition to the Eco settings, your TV also has environmentally
friendly technology with regard to power consumption.
Inactive devices off
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are inactive.
22.2
Reception for non-satellite TVs
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband; S-Channel; UHF; VHF
• DVB :
- For model name with PxH: DVB-T (terrestrial, antenna)
75
Download from Www.Somanuals.com. All Manuals Search And Download.
COFDM 2K/8K; DVB-C (cable) QAM
Input resolution for HD/FHD TVs
- For model name with PxT: DVB-T2; DVB-C (cable) QAM
• Analogue video playback : NTSC; SECAM; PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2);
MPEG4 SD/HD (ISO/IEC 14496-10)
Video formats
Resolution — Refresh rate
• Digital audio playback (ISO/IEC 13818-3)
• 480i - 60 Hz
• 480p - 60 Hz
Note: See selected countries on the TV type plate
• 576i - 50 Hz
• 576p - 50 Hz
22.3
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
Reception for satellite TVs
Computer formats
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB :
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
- For model name with PxK:
DVB-T (terrestrial, antenna) COFDM 2K/8K; DVB-C (cable)
QAM; DVB-S/S2 QPSK, symbol rate 2 to 45M symbols, SCPC
and MCPC
- For model name with PxS:
DVB-T2; DVB-C (cable) QAM; DVB-S/S2 QPSK, symbol rate 2
to 45M symbols, SCPC and MCPC
• Analogue video playback : NTSC, SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2),
MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
• Satellite aerial input : 75 ohm F-type
Input resolution for UHD TVs
• Input frequency range : 950 to 2150MHz
• Input level range : 25 to 65 dBm
• Supported satellites : Astra 19.2°E, Astra 23.5°E, Astra 28.2°E,
Hotbird 13.0°E, TürkSat 42.0°E, Eutelsat 7°W, Thor 1°W
• Astra HD+ support
• LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity selection
14/18V, Band selection 22kHz, Tone burst mode, LNB current
300mA max
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
• 2160p - 24 Hz, 25 Hz, 30 Hz (HDMI only)
Note: See selected countries on the TV type plate.
22.4
Computer formats
Resolutions (amongst others)
Display
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
Type
• Diagonal screen size :
- 102 cm / 40 inch
- 127 cm / 50 inch
- 147 cm / 58 inch
• Display native resolution : 3840x2160p
76
Download from Www.Somanuals.com. All Manuals Search And Download.
• Digital Audio out: Optical, Toslink
• Network LAN : RJ45
• HDMI in with ARC
• USB 2.0
22.5
Power
Product specifications are subject to change without notice. For
more specification details of this product,
TV Side
• HDMI in with ARC
• USB 2.0
• Common interface slot: CI+/CAM
• Headphones: Stereo mini-jack 3.5mm
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : < 0.3W
• Power saving features : Energy saving, Screen off, Light sensor,
Switch off timer, Inactive devices off.
22.8
The power rating stated on the product typeplate is the power
consumption for this product during normal household use (IEC
62087 Ed.2). The maximum power rating, stated between
brackets, is used for electrical safety (IEC 60065 Ed. 7.2).
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45*
• Wi-Fi 802.11b/g/n (built-in)*
22.6
Supported USB file systems
• FAT 16, FAT 32, NTFS
Dimensions and weights (6809
series)
Playback formats
• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), Quicktime (MOV, M4V, M4A),
Windows Media (ASF/WMV/WMA)
40PUx6809
• without TV stand:
Width 900.5 mm - Height 527.8 mm - Depth 38.4 mm - Weight
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4
Part 10 AVC (H264), VC-1, WMV9
±10.4 kg
• with TV stand:
Width 900.5 mm - Height 587.5 mm - Depth 213 mm - Weight
±11.6 kg
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby
Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™,
MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.2),
WMA Pro (v9/v10)
• Subtitles :
50PUx6809
– Formats : SAMI, SubRip (SRT), SubViewer (SUB), MicroDVD
(TXT), mplayer2 (TXT), TMPlayer (TXT)
– Character encodings : UTF-8, Central Europe and Eastern
Europe (Windows-1250), Cyrillic (Windows-1251), Greek
(Windows-1253), Turkish (Windows-1254), Western Europe
(Windows-1252)
• without TV stand:
Width 1122.9 mm - Height 662.2 mm - Depth 38.9 mm -
Weight ±16.4 kg
• with TV stand:
Width 1122.9 mm - Height 722.2 mm - Depth 280 mm -
Weight ±17.9 kg
• Image Codecs : JPEG
• Limitations :
58PUx6809
• without TV stand:
– Maximum supported total bit rate for a media file is 30Mbps.
– Maximum supported video bit rate for a media file is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Width 1298.5 mm - Height 768.9 mm - Depth 38.4 mm -
Weight ±24 kg
• with TV stand:
Width 1298.5 mm - Height 828.3 mm - Depth 300 mm -
Weight ±25.6 kg
Wi-Fi Certified Miracast™*
This TV supports WiDi 4.x devices.
22.7
Supported media server software (DMS)*
• PC - Microsoft Windows XP, Vista or Windows 7
– You can use any DLNA certified® media server software.
– Microsoft - Windows Media Player
Connectivity
TV Rear
• Mac OS X
• Audio In (DVI to HDMI): Stereo mini-jack 3.5mm
• CVBS: Audio L/R, CVBS in, RGB
• SCART: Audio L/R, CVBS in, RGB
• YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm
– You can use any DLNA certified® media server software.
• Mobile devices
– Philips MyRemote - iOS, Android
– Interoperability and performance may vary, depending on the
77
Download from Www.Somanuals.com. All Manuals Search And Download.
capabilities of the mobile device and the software used.
ESD regulations
This apparatus meets performance criteria A for ESD. In case
the apparatus does not recover in file sharing mode due to
electrostatic discharge, user interference is required.
* Only for Smart TVs.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Update from Internet
Software
23.1
If the TV is connected to the Internet, you may receive a
message from TP Vision to update the TV software. You need a
high-speed (broadband) Internet connection.
If you receive this message, we recommend you carry out the
update.
Software update
Select Update. Follow the instructions on screen.
Update from USB
You can also look for new updates yourself.
To look for an update . . .
It might be necessary to update the TV software. You need a
computer with an high-speed Internet connection and a USB
memory device to upload the software on the TV. Use a USB
memory device with 256MB free space. Make sure that write
protection is switched off.
1 - Press and select
and press
.
OK
Setup
2 - Select
>
, then
Update software TV with Internet
press
. Follow the instructions on screen.
OK
When the update is complete, the TV switches off and back on
again automatically.
Wait for the TV to switch itself back on.
1 -
Start the update on TV
Press , select and press
Select
.
Setup
OK
>
and press
.
OK
Update software USB
2 -
Identify the TV
Insert the USB memory into one of the USB connections of the
TV.
23.2
Select
and press
. An identification file is written on the
OK
Start
USB memory device.
3 -
Software version
To view the current TV software version . . .
Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the file
double click it.
1 - Press and select
and press
and press
.
OK
.
OK
Setup
and
update.htm
2 - Select
Software settings
3 - Select
and see
Release Version.
Current software info
Click on
.
Send ID
4 - Press , repeatedly if necessary, to close the menu.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file
onto the USB memory device.
autorun.upg
Do not place this file in a folder.
4 -
23.3
Update the TV software
Open source software
Insert the USB memory into the TV again. The update starts
automatically.
This television contains open source software. TP Vision Europe
B.V. hereby offers to deliver, upon request, a copy of the
complete corresponding source code for the copyrighted open
source software packages used in this product for which such
offer is requested by the respective licences.
The TV switches itself off for 10 seconds and then back on again.
Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
This offer is valid up to three years after product purchase to
anyone in receipt of this information.
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
update will continue.
To obtain the source code, please write in English to . . .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
At the end of the update, the message
Operation
appears on screen. Remove the USB memory device
successful
and press on the remote control.
Do not . . .
• press twice
23.4
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
Open source license
Acknowledgements and License Texts for any open source
software used in this Philips TV.
The TV software has been updated. You can use the TV again.
To prevent an accidental update of the TV software, delete the
autorun.upg file from the USB memory device.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
This is a document describing the distribution of the source
code used on the Philips TV, which fall either under the GNU
General Public License (the GPL), or the GNU Lesser General
Public License (the LGPL), or any other open source license.
Instructions to obtain source code for this software can be
found in the user manual.
animation extension to the popular PNG image-format.
This piece of software is made available under the terms and
conditions of the libmng license, which can be found below.
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot loader, GPL
license.
This piece of software is made available under the terms and
conditions of the u-Boot loader license, which can be found
below.
PHILIPS MAKES NO WARRANTIES WHATSOEVER, EITHER
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THIS SOFTWARE. Philips offers no
support for this software. The preceding does not affect your
warranties and statutory rights regarding any Philips product(s)
you purchased. It only applies to this source code made available
to you.
Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-side URL
transfer library, supporting FTP, FTPS, HTTP, HTTPS, SCP, SFTP,
TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3
and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP
PUT, FTP uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM, Negotiate,
Kerberos4), file transfer resume, http proxy tunneling and more!
This piece of software is made available under the terms and
conditions of the Libcurl license, which can be found below.
Freetype (2.4.3)
FreeType is a software font engine that is designed to be small,
efficient, highly customizable, and portable while capable of
producing high-quality output (glyph images).
This piece of software is made available under the terms and
conditions of the FreeType Project license, which can be found
below.
zlib (1.2.3)
The 'zlib' compression library provides in-memory compression
and decompression functions, including integrity checks of the
uncompressed data.
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and name
resolves asynchronously.
This piece of software is made available under the terms and
conditions of the zlib license, which can be found below.
This piece of software is made available under the terms and
conditions of the c-ares license, which can be found below.
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
openssl (1.0.0d)
OpenSSL is an open source implementation of the SSL and TLS
protocols. The core library (written in the C programming
language) implements the basic cryptographic functions and
provides various utility functions. Wrappers allowing the use of
the OpenSSL library in a variety of computer languages are
available.
This piece of software is made available under the terms and
conditions of the 1.7.4 license, which can be found below.
unicode (3.2)
This library is used to perform UNICODE string manipulation.
This piece of software is made available under the terms and
conditions of the ICU license, which can be found below.
libpng (1.2.43)
PNG decoder.
Expat (2.01)
This piece of software is made available under the terms and
conditions of the libpng license, which can be found below.
xml paser; Expat is an XML parser library written in C. It is a
stream-oriented parser in which an application registers handlers
for things the parser might find in the XML document (like start
tags). An introductory article on using.
libjpg (6b)
This piece of software is made available under the terms and
conditions of the Expat license, which can be found below.
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the terms and
conditions of the libjpg license, which can be found below.
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based operating
system with a small memory footprint that provides graphics
acceleration, input device handling and abstraction layer, and
integrated windowing system with support for translucent
libmng (1.0.10)
libmng -THE reference library for reading, displaying, writing and
examining Multiple-Image Network Graphics.MNG is the
80
Download from Www.Somanuals.com. All Manuals Search And Download.
windows and multiple display layers on top of the Linux
framebuffer without requiring any kernel modifications.
This piece of software is made available under the terms and
conditions of the DirectFB license, which can be found below.
pplications_SDK/remote_spplications_SDK_v1.3.1/DirectFB141_
source_1.3.1.7z/download
routines for read, write and erase. Presentation of the device's
contents to the user in an appropriate form will be handled by
the upper layers of the system.
This piece of software is made available under the terms and
conditions of the mtd-utils license, which can be found below.
libusb (1.0.6)
SAWMAN
This is the home of libusb, a library that gives user level
applications uniform access to USB devices across many different
operating systems. libusb is an open source project licensed
under the GNU Lesser General Public License version 2.1.Many
participants in the libusb community have helped and continue
to help with ideas, implementation, support and improvements
for libusb.
SquashFS is a compressed read-only file system for Linux.
SquashFS compresses files, inodes and directories, and supports
block sizes up to 1 MB for greater compression. SquashFS is also
the name of free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the terms and
conditions of the libusb license, which can be found below.
Source:
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used by the Linux
family of Unix-like operating systems.
This piece of software is made available under the terms and
conditions of the Linux Kernel license, which can be found
below.
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
SQLite (3.7.2)
This piece of software is made available under the terms and
conditions of the libusb-compat license, which can be found
below.
SQLite is a in-process library that implements a self-contained,
serverless, zero-configuration, transactional SQL database
engine.
This piece of software is made available under the terms and
conditions of the SQLite license, which can be found below.
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform implementation of
the Microsoft Windows NTFS file system with read-write
support. NTFS-3G often uses the FUSE file system interface, so
it can run unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris, BeOS,
QNX, WinCE, Nucleus, VxWorks, Haiku,MorphOS, and Mac
OS X It is licensed under either the GNU General Public
License or a proprietary license. It is a partial fork of ntfsprogs
and is under active maintenance and development.
This piece of software is made available under the terms and
conditions of the NTFS-3G Read/Write Driver license, which
can be found below.
SquashFS (3.4)
SquashFS is a compressed read-only file system for Linux.
SquashFS compresses files, inodes and directories, and supports
block sizes up to 1 MB for greater compression. SquashFS is also
the name of free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the terms and
conditions of the SquashFS license, which can be found below.
glibc (2.6.1)
Any Unix-like operating system needs a C library: the library
which defines the ``system calls'' and other basic facilities such as
open, malloc, printf, exit...The GNU C library is used as the C
library in the GNU system and most systems with the Linux
kernel
This piece of software is made available under the terms and
conditions of the glibc license, which can be found below.
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The supplier for
these tools is Atheros.These pieces of software are made
available under the terms and conditions of the GPL v2 license,
which can be found below.
This piece of software is made available under the terms and
conditions of the WPA Supplicant license, which can be found
below.
mtd-utils (1)
The aim of the system is to make it simple to provide a driver
for new hardware, by providing a generic interface between the
hardware drivers and the upper layers of the system. Hardware
drivers need to know nothing about the storage formats used,
such as FTL, FFS2, etc., but will only need to provide simple
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the terms and
conditions of the ntfsprogs license, which can be found below.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
A library provides an encrypted filesystem in user-space.
fuse (2.8.4)
Fuse is a simple interface for userspace programs to export a
virtual filesystem to the linux kernel.
This piece of software is made available under the terms and
conditions of the fuse license, which can be found below.
boost (1.15.0)
A library provides free peer-reviewed portable C++ source
libraries is used for encfs.
rlog (1.4)
libiconv (1.11.1)
A library that provides a flexible message logging facility for C
programs and libraries is used for encfs.
This library provides an iconv() implementation, for use on
systems which don't have one, or whose implementation cannot
convert from/to Unicode. .
This piece of software is made available under the terms and
conditions of the libiconv license, which can be found below.
iptables (1.4.15)
For Cross connection.
electric-fence (2.1.13)
bash (3.2.48)
Used for memory corruption detection.
This piece of software is made available under the terms and
conditions of the electric-fence license, which can be found
below.
fence_2.1.13-0.1.tar.gz
Bash is the shell, or command language interpreter, that will
appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates useful features
from the Korn shell (ksh) and C shell (csh).
It is intended to conform to the IEEE POSIX P1003.2/ISO
9945.2 Shell and Tools standard.
It offers functional improvements over sh for both programming
and interactive use.
liveMedia
When Wifi Display or streaming RtspPlayer are enabled.
This piece of software is made available under the terms and
conditions of the electric-fence license, which can be found
below.
In addition, most sh scripts can be run by Bash without
modification.
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to exist on every
operating system.
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the terms and
conditions of the QT license, which can be found below.
findutils (4.2.31)
e2fsprogs (1.41.14)
The GNU Find Utilities are the basic directory searching utilities
of the GNU operating system.
These programs are typically used in conjunction with other
programs to provide modular and powerful directory search and
file locating capabilities to other commands.
e2fsprogs provides the filesystem utilities for use with the ext2
filesystem, it also supports the ext3 and ext4 filesystems.
This piece of software is made available under the terms and
conditions of the e2fsprogs license, which can be found below.
alsa (1.0.24.1)
gawk (3.1.5)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the terms and
conditions of the alsa license, which can be found below.
If you are like many computer users, you would frequently like
to make changes in various text files wherever certain patterns
appear, or extract data from parts of certain lines while
discarding the rest.
To write a program to do this in a language such as C or Pascal
is a time-consuming inconvenience that may take many lines of
code.
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the terms and
conditions of the lvm2 license, which can be found below.
The job is easy with awk, especially the GNU implementation:
gawk.
encfs (1.3.2)
grep (2.5.1a)
82
Download from Www.Somanuals.com. All Manuals Search And Download.
The grep command searches one or more input files for lines
containing a match to a specified pattern. By default, grep prints
the matching lines.
text.
sed is typically used for extracting part of a file using pattern
matching or substituting multiple occurrences of a string within a
file.
gzip (1.3.12)
GNU Gzip is a popular data compression program originally
written by Jean-loup Gailly for the GNU project. Mark Adler
wrote the decompression part.
tar (1.17)
GNU Tar provides the ability to create tar archives, as well as
various other kinds of manipulation.
For example, you can use Tar on previously created archives to
extract files, to store additional files, or to update or list files
which were already stored.
inetutils (1.4.2)
Inetutils is a collection of common network programs.
util-linux-ng (2.18)
iputils (s20101006)
Various system utilities.
The iputils package is set of small useful utilities for Linux
networking. It was originally maintained by Alexey Kuznetsov.
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared towards?embedded
module-init-tools (3.12)
systems.
Provides developer documentation for the utilities used by Linux
systems to load and manage kernel modules (commonly
referred to as "drivers").
Source:
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support for the
execution of NCL application. This library was developed for the
GNOME software suite and is available under a "MIT" license.
ncurses (5.7)
The Ncurses (new curses) library is a free software emulation of
curses in System V Release 4.0, and more.
It uses Terminfo format, supports pads and color and multiple
highlights and forms characters and function-key mapping, and
has all the other SYSV-curses enhancements over BSD Curses.
uriparser (0.7.7)
For MPEG-DASH
net-tools (1.6)
xerces-c++ (3.1.1)
The Net-tools?package is a collection of programs for controlling
the network subsystem of the Linux kernel.
et-tools.html
For MPEG-DASH
webp (0.2.1)
For Netflix
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small useful utilities
that give information about processes using the /proc filesystem.
The package includes the programs ps, top, vmstat, w, kill, free,
slabtop, and skill.
wget (1.10.2)
GNU Wget is a free software package for retrieving files using
HTTP, HTTPS and FTP, the most widely-used Internet
protocols.
It is a non-interactive commandline tool, so it may easily be
called from scripts,?cron?jobs, terminals without X-Windows
support, etc.
psmisc (22.13)
This PSmisc package is a set of some small useful utilities that use
the proc filesystem. We're not about changing the world, but
providing the system administrator with some help in common
tasks.
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
sed (4.1.5)
They use a textual interface and are rather crude, but aim to
support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/T
ools.html
sed (stream editor) isn't an interactive text editor. Instead, it is
used to filter text, i.e., it takes text input, performs some
operation (or set of operations) on it, and outputs the modified
83
Download from Www.Somanuals.com. All Manuals Search And Download.
ezxml (0.8.6)
jquery (1.10.2)
ezXML is a C library for parsing XML documents. Used inside
Philips libraries.
jQuery is a fast and concise JavaScript Library that simplifies
HTML document traversing, event handling, animating, and Ajax
interactions for rapid web development.
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-contained,
serverless, zero-configuration, transactional SQL database
engine.
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for building
control points, devices, and bridges that are compliant with
Version 1.0 of the UPnP Device Architecture Specification.
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a specification for the
encryption of electronic data. Used inside Philips libraries.
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of Bonjour,
Apple's ease-of-use IP networking
microhttpd (libmicrohttpd-0.9.9.tar.gz)
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic discovery of
devices and services
GNU libmicrohttpd is a small C library that is supposed to make
it easy to run an HTTP server as part of another application.
The original download site for this software is :
software is made available under the terms and conditions of the
LGPL v2.1 license
Source:
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser written in
ANSI C, and a small validating JSON generator. YAJL is released
under the ISC license.
The original download site for this software is :
available under the terms and conditions of the ISC license
1-0-gf4b2b1a.tar.gz/df6a751e7797b9c2182efd91b5d64017/lloyd-
yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is a specific
construction for calculating a message authentication code
(MAC) involving a cryptographic hash function in combination
with a secret cryptographic key.
As with any MAC, it may be used to simultaneously verify both
the data integrity and the authentication of a message.
Any cryptographic hash function, such as MD5 or SHA-1, may
be used in the calculation of an HMAC; the resulting MAC
algorithm is termed HMAC-MD5 or HMAC-SHA1 accordingly.
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++ software
development toolkit for SOAP/XML Web services and generic
(non-SOAP) C/C++ XML data bindings.
Part of the software embedded in this product is gSOAP
software. Portions created by gSOAP are Copyright 2000-2011
Robert A. van Engelen, Genivia inc. All Rights Reserved.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
When the TV is disconnected and reconnected to the power
supply, the startup screen is displayed at the next startup. To
switch on the TV from standby, press on the remote control or
the TV.
24
Troubleshooting and
The standby light keeps on blinking
support
Disconnect the power cable from the power outlet. Wait 5
minutes before you reconnect the power cable. If the blinking
reoccurs, contact Philips TV Consumer Care.
24.1
Troubleshooting
Wrong menu language
Channels
Change the language back to your language.
1 - Press and select
and press
.
OK
Setup
>
No digital channels found during the installation
2 - Select
>
and
TV settings General settings Menu language
See the technical specifications to make sure that your TV
supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and that the
correct network is selected.
press
.
OK
3 - Select the language you want and press
4 - Press , repeatedly if necessary, to close the menu.
.
OK
Previously installed channels are not in the channel list
Picture
Make sure that the correct channel list is selected.
No picture / distorted picture
• Make sure that the antenna is properly connected to the TV.
• Make sure that the correct device is selected as the display
source.
General
The TV does not switch on
• Disconnect the power cable from the power outlet. Wait for
one minute then reconnect it.
• Make sure that the external device or source is properly
connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
• Make sure that the power cable is securely connected.
Creaking sound at startup or switch off
Poor antenna reception
• Make sure that the antenna is properly connected to the TV.
• Loud speakers, unearthed audio devices, neon lights, high
buildings and other large objects can influence reception quality.
If possible, try to improve the reception quality by changing the
antenna direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune this
channel.
When you are turning the TV on, off or to standby, you hear a
creaking sound from the TV chassis. The creaking sound is due
to the normal expansion and contraction of the TV as it cools
and warms up. This does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this time, the TV
does not respond to the remote control or TV controls. This is
normal behaviour.
If the TV continues to be unresponsive to the remote control,
you can check if the remote control is working by means of a
mobile phone camera. Put the phone in camera mode and point
the remote control to the camera lens. If you press any key on
the remote control and you notice the infra red LED flicker
through the camera, the remote control is working. The TV
needs to be checked.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that
is set to
. You can change and
Home
Location
save settings in this mode.
A commercial banner appears
Make sure that
is set to
.
Location
Home
If you do not notice the flickering, the remote control might be
broken or its batteries are low.
This method of checking the remote control is not possible with
remote controls which are wirelessly paired with the TV.
Picture does not fit the screen
Change to a different picture format. Press .
The TV goes back to standby after showing the Philips startup
screen
Picture format keeps changing with different channels
Select a non 'Auto' picture format.
When the TV is in standby, a Philips startup screen is displayed,
then the TV returns to standby mode. This is normal behaviour.
Picture position is incorrect
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture signals from some devices may not fit the screen
correctly. Check the signal output of the connected device.
Choppy playback of USB files
• The transfer performance of the USB storage device may limit
the data transfer rate to the TV which causes poor playback.
Computer picture is not stable
Make sure that your PC uses the supported resolution and
refresh rate.
24.2
Register
Sound
Register your TV and enjoy a range of benefits including full
support (including downloads), privileged access to information
about new products, exclusive offers and discounts, the chance
to win prizes and even participate in special surveys about new
releases.
No sound or poor sound quality
If no audio signal is detected, the TV automatically switches the
audio output off — this does not indicate malfunction.
Go to
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to zero.
• Make sure that the TV audio output is connected to the audio
input on the Home Theatre System.
24.3
Help
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable HDMI
audio output. If HDMI audio is already enabled, but you still do
not hear audio, try changing the digital audio format of the
device to PCM (Pulse Code Modulation). Refer to the
documentation accompanying your device for instructions.
This TV offers help on screen.
Open Help
1 - Press to open the Home menu.
2 - Select
and press
.
OK
Help
To look up topics alphabetically, select
.
Keywords
To read the Help as a book, select
.
Book
Connections
Before you execute the Help instructions, close Help.
To close Help, press .
HDMI
Direct help
• Note that HDCP (High-bandwidth Digital Content Protection)
support can delay the time taken for a TV to display content
from an HDMI device.
• If the TV does not recognise the HDMI device and no picture
is displayed, switch the source from one device to another and
back again.
• If there are intermittent sound disruptions, make sure that
output settings from the HDMI device are correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable,
make sure that an additional audio cable is connected to
AUDIO IN (mini-jack only), if available.
Press the key (blue) to open Help immediately. Help will
open on the chapter that is most relevant to what you are doing
or what is selected on TV.
For some activities, like Text (Teletext), the colour keys have
specific functions and cannot open Help.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format to read on
your smartphone, tablet or computer. Alternatively, you can
print the relevant Help page from your computer.
To download the Help (user manual) go to
EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices that are
HDMI-CEC compatible.
No volume icon shown
• When a HDMI-CEC audio device is connected this behaviour
is normal.
UMv 7500140505 - 20140805
Photos, videos and music from a USB device do not show
• Make sure that the USB storage device is set to Mass Storage
Class compliant, as described in the storage device's
documentation.
• Make sure that the USB storage device is compatible with the
TV.
• Make sure that the audio and picture file formats are
supported by the TV.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
24.4
Online help
To solve any Philips TV related problem, you can consult our
online support. You can select your language and enter your
product model number.
Go to
.
On the support site you can find your country's telephone
number to contact us as well as answers to frequently asked
questions (FAQs). In some countries, you can chat with one of
our colaborators and ask your question directly or send a
question by email.
You can download new TV software or the manual to read on
your computer.
24.5
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your
country. Find the telephone number in the printed
documentation that came with the TV.
Or consult our website
.
TV model number and serial number
You might be asked to provide the TV product model number
and serial number. Find these numbers on the packaging label or
on the type label on the back or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may cause severe
injury, irrepairable damage to your TV or void your warranty.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Risk of injury or damage to the TV
Safety and care
• Two people are required to lift and carry a TV that weighs
more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the supplied stand.
Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support the weight
of the TV and the stand.
25.1
Safety
Important
• When wall mounted, ensure that the wall mount can safely
bear the weight of the TV set. TP Vision bears no responsibility
for improper wall mounting that results in accident, injury or
damage.
• Parts of this product are made of glass. Handle with care to
avoid injury or damage.
Read and understand all safety instructions before you use the
TV. If damage is caused by failure to follow instructions, the
warranty does not apply.
Risk of damage to the TV !
Secure the TV from falling over
Before you connect the TV to the power outlet, ensure that the
power voltage matches the value printed on the back of the TV.
Never connect the TV to the power outlet if the voltage is
different.
Always use the supplied wall bracket to secure the TV from
falling over. Mount the bracket and secure the TV onto the
bracket, even if you put the TV on the floor.
You can find the mounting instructions in the Quick Start Guide
that came with the TV. In case you lost this guide, you can
download the guide from www.philips.com
Risk of injury to children
Use the product type number of the TV to look for the Quick
Start Guide to download.
Follow these precautions to prevent the TV from toppling over
and causing injury to children:
• Never place the TV on a surface covered by a cloth or other
material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of the
mounting surface.
• Never place the TV on tall furniture, such as a bookcase,
without anchoring both the furniture and TV to the wall or a
suitable support.
• Teach children about the dangers of climbing on furniture to
reach the TV.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place liquid
containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV from the
power outlet immediately.
Contact Philips TV Consumer Care to have the TV checked
before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning candles, naked
flames or other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries which can
easily be swallowed by small children. Keep these batteries out
of reach of children at all times.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power plugs can
cause arcing or fire. Ensure that no strain is exerted on the
power cord when you swivel the TV screen.
• To disconnect the TV from the mains power, the power plug
of the TV must be disconnected. When disconnecting the
power, always pull the power plug, never the cord. Ensure that
you have full access to the power plug, power cord and outlet
socket at all times.
Risk of overheating
Never install the TV in a confined space. Always leave a space of
at least 10 cm or 4 inches around the TV for ventilation. Ensure
curtains or other objects never cover the ventilation slots on the
TV.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Lightning storms
Disconnect the TV from the power outlet and antenna before
lightning storms.
During lightning storms, never touch any part of the TV, power
cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high volumes or for
prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or 41°F,
unpack the TV and wait until the TV temperature reaches room
temperature before connecting the TV to the power outlet.
Humidity
In rare occasions, depending on temperature and humidity,
minor condensation can occur on the inside of the TV glass
front (on some models). To prevent this, do not expose the TV
to direct sunlight, heat or extreme humidity. If condensation
occurs, it will disappear spontaneously while the TV is playing for
a few hours.
The condensation moisture will not harm the TV or cause
malfunction.
25.2
Screen care
• Never touch, push, rub or strike the screen with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and wipe
gently. Avoid touching the Ambilight LEDs on the backside of
the TV. Never use substances such as alcohol, chemicals or
household cleaners on the TV.
• To avoid deformations and colour fading, wipe off water drops
as quickly as possible.
• Avoid stationary images as much as possible. Stationary images
are images that remain onscreen for extended periods of time.
Stationary images include onscreen menus, black bars, time
displays, etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
consumers which, like any electronic apparatus, in general have
the ability to emit and receive electromagnetic signals. One of
Philips’ leading Business Principles is to take all necessary health
and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the Electro
Magnetic Field (EMF) standards applicable at the time of
producing the products. Philips is committed to develop,
produce and market products that cause no adverse health
effects. TP Vision confirms that, as long as its products are
handled properly for their intended use, they are safe to use
according to scientific evidence available today. Philips plays an
active role in the development of international EMF and safety
standards, enabling Philips to anticipate further developments in
standardisation for early integration in its products.
26
Terms of use,
copyrights and licenses
26.1
Terms of use
2014 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision Europe
B.V. or one of its affiliates, hereinafter referred to as TP Vision,
which is the manufacturer of the product. TP Vision is the
warrantor in relation to the TV with which this booklet was
packaged. Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
26.2
Copyrights and licenses
Specifications are subject to change without notice. Trademarks
are the property of Koninklijke Philips N.V or their respective
owners. TP Vision reserves the right to change products at any
time without being obliged to adjust earlier supplies accordingly.
HDMI
The written material packaged with the TV and the manual
stored in the memory of the TV or downloaded from the Philips
website are believed to be adequate for the intended use of the
system.
HDMI®
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
The material in this manual is believed adequate for the intended
use of the system. If the product, or its individual modules or
procedures, are used for purposes other than those specified
herein, confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the material itself
does not infringe any United States patents. No further warranty
is expressed or implied. TP Vision Europe B.V. cannot be held
responsible neither for any errors in the content of this
document nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted and
published on the Philips support website as soon as possible.
Terms of warranty Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the manufacturer. The
caution sign printed on the back of the TV indicates risk of
electric shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any operation
expressly prohibited in this manual, or any adjustments and
assembly procedures not recommended or authorised in this
manual, shall void the warranty. Pixel characteristics This
LCD/LED product has a high number of colour pixels. Although
it has effective pixels of 99.999% or more, black dots or bright
points of light (red, green or blue) may appear constantly on the
screen. This is a structural property of the display (within
common industry standards) and is not a malfunction. CE
compliance This product is in compliance with the essential
requirements and other relevant provisions of Directives
2006/95/EC (Low Voltage), 2004/108/EC (EMC) and
Dolby
Dolby®
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
DTS 2.0 + Digital Out ™
DTS 2.0 + Digital Out™
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 and other U.S. and worldwide patents
issued and pending. DTS, the Symbol, and DTS and the Symbol
together are registered trademarks and DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. © DTS, Inc.
2011/65/EU (ROHS). Compliance with EMF TP Vision Europe
B.V. manufactures and sells many products targeted at
90
Download from Www.Somanuals.com. All Manuals Search And Download.
All Rights Reserved.
Skype
Microsoft
Windows Media
Skype™
Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other
countries.
© 2013 Skype and/or Microsoft. The Skype name, associated
trade marks and logos and the "S" logo are trade marks of Skype
or related entities.
Skype is a trademark of Skype or its related companies.
Although this product has been tested and met our certification
standards for audio and video quality, it is not endorsed by
Skype, Skype Communications S.a.r.l. or any of their related
companies.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content access
technology to protect their intellectual property, including
copyrighted content.
This device uses PlayReady technology to access PlayReady-
protected content and/or WMDRM-protected content. If the
device fails to properly enforce restrictions on content usage,
content owners may require Microsoft to revoke the device's
ability to consume PlayReady-protected content. Revocation
should not affect unprotected content or content protected by
other content access technologies. Content owners may require
you to upgrade PlayReady to access their content. If you decline
an upgrade, you will not be able to access content that requires
the upgrade.
DLNA Certified®
© 2013 Digital Living Network Alliance. All rights reserved.
© 2013 DLNA. All rights reserved.
Wi-Fi Alliance
DTVi
, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
Wi-Fi®
registered trademarks of the Wi-Fi Alliance.
Wi-Fi CERTIFIED
,
are trademarks of the Wi-Fi Alliance.
Miracast™ Miracast™
The DTVi brand and logo are registered marks of Pontifical
Catholic University of Rio de Janeiro (PUC-Rio) and the Federal
University of Paraíba (UFPB).
MHEG software
The copyright in MHEG software ("the Software") comprised in
this television ("this product") and included to enable you to use
interactive television features is owned by S&T CLIENT
SYSTEMS LIMITED ("the Owner"). You are permitted to use the
Software only in conjunction with this product.
Java
Kensington
Java and all Java based trademarks are registered trademarks of
Oracle and/or its affiliates, in the United States and other
countries.
Kensington and Micro Saver are registered US trademarks of
ACCO World Corporation with issued registrations and
91
Download from Www.Somanuals.com. All Manuals Search And Download.
pending applications in other countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are the
property of their respective owners.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact information
Argentina
Italia
Romānä
0800 444 7749
0245 28 70 14 (chiamata nazionale)
031 6300042 (Tarif local)
Buenos Aires 0810 444 7782
Ireland
Россия
België / Belgique
0818 210 140 (national call)
8-800-22 00004 (бесплатно)
070 700 035 (0,15€/min.)
Northern Ireland
Suisse / Schweiz / Svizzera
Bosna i Hercegovina
0844 338 04 88 (5p/min BT landline)
0848 000 291 (0,081 CHF/Min.)
033 941 251 (Lokalni poziv)
Kaзaкcтaн
Србија
Brazil
8 10 800 2000 00 04 (free)
011 321 6840 (Lokalni poziv)
0800 701 0245
Sao Paulo 2938 0245
Latvia
Slovakia
6616 3263 (Vietējais tarifs)
2 332 154 93 (Vnútroštátny hovor)
Бълария
02 4916 273 (Национален номер)
Lithuania
Slovenija
8 5 214 0293 (Vietinais tarifais)
1 888 83 12 (Lokalni klic)
Česká republika
228880895 (Místní tarif)
Luxembourg / Luxemburg
Suomi
2487 1100 (Nationale Ruf / appel national)
09 88 62 50 40
Danmark
3525 8314
Magyarország
Sverige
06 1 700 8151 (Belföldi hívás)
08 5792 9096 (lokalsamtal)
Deutchland
0180 501 04 69 (0,14€/Min.)
Nederland
0900 202 08 71 (0,10€/min.)
(Thailand)
ประเทศไทย
02 652 7650
Ελλάδα
2111983028 (Εθνική κλήση)
Norge
Türkiye
22 97 19 14
444 8 445
España
902 88 10 83 (0,10€ + 0,08€/min.)
Österreich
United Kingdom
0820 40 11 33 (0,145€/Min.)
0844 338 04 88 (5p/min BT landline)
Estonia
6683061 (Kohalikud kõned)
Polska
Україна
22 397 15 04 (Połączenie lokalne)
0-800-500-480 (безкоштовно)
France
01 57 32 40 50 (local)
Portugal
707 78 02 25 (0,12€/min. - Móvel
0,30€/min.)
Hrvatska
01 777 66 01 (Lokalni poziv)
Non-contractual images / Images non contractuelles / Außervertragliche Bilder
Specifications are subject to change without notice.
Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license from Koninklijke Philips Electronics N.V.
All registered and unregistered trademarks are property of their respective owners.
2014 © TP Vision Europe B.V. All rights reserved.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
|