Philips MP3 Player AJL700 User Manual

AJL 700  
DVD Kitchen Radio  
with LCD-TV  
THANKYOU FOR CHOOSING PHILIPS!  
NEED HELP FAST?  
Read your Quick-Start guide and/or owner's manual first for quick tips  
that make using your Philips product more enjoyable. If you have read  
your instructions and still need assistance,  
you may access our online help at www.p4c.philips.com  
or call 1-888-PHILIPS(744-5477) while with your  
product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2 3  
4
5 6 7  
8
9
TIMER  
PLAY  
/
PAUSE  
STOP  
PREV  
NEXT  
EJECT  
TUNING/CLOCK  
CLK/DISP  
PRESS TO  
START/STOP  
AJL700 KITCHEN DVD PLAYER  
-
REMOTE  
SENSOR  
SOURCE  
AUTO PROG/  
PRESET  
/
PRESET+  
CH. UP  
/
RADIO PROG CH. DOWN  
BAND  
DSC  
MUTE  
VOLUME  
POWER  
0
*
& ^  
% $ # @ !  
*
PUSH  
(
) ¡  
£
FM ANT  
TV ANT  
AM ANT  
DC-12V  
R
AUDIO IN  
L
VIDEO IN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Return your Product Registration Card today  
to get the very most from your purchase.  
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so  
don't miss out. Complete and return your Product Registration Card at once to ensure:  
*Proof of  
Purchase  
*Product Safety *Additional  
Benefits of  
Notification  
Product  
Ownership  
Returning the enclosed card  
guarantees that your date of  
purchase will be on file, so no  
additional paperwork will be  
required from you to obtain  
warranty service.  
By registering your product, you'll  
receive notification - directly from  
the manufacturer - in the rare  
case of a product recall or safety  
defect.  
Registering your product  
guarantees that you'll receive  
all of the privileges to which  
you're entitled, including special  
money-saving offers.  
Knowsthaesfeetysymbols  
CAUTION  
For Customer Use  
Enter below the Serial No. which is  
located on the rear of the cabinet.  
Retain this information for future  
reference.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Model No. ______________________  
______________________  
Serial No.  
This “bolt of lightning” indicates  
uninsulated material within your  
unit may cause an electrical  
WARNING: To reduce the risk of fire  
or electric shock, this apparatus should  
not be exposed to rain or moisture, and  
objects filled with liquids, such as vases,  
should not be placed on this apparatus.  
shock. For the safety of everyone in your  
household, please do not remove  
product covering.  
The “exclamation point” calls  
attention to features for which  
you should read the enclosed  
CAUTION: To prevent electric shock,  
match wide blade of plug to wide slot,  
fully insert.  
literature closely to prevent operating  
and maintenance problems.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase,  
and welcome to the “family!”  
Dear PHILIPS product owner:  
Thank you for your confidence in PHILIPS.You’ve selected one of the best-  
built, best-backed products available today.We’ll do everything in our  
power to keep you happy with your purchase for many years to come.  
As a member of the PHILIPS “family,” you’re entitled to protection by one  
of the most comprehensive warranties and outstanding service networks  
in the industry.What’s more, your purchase guarantees you’ll receive all the  
information and special offers for which you qualify, plus easy access to  
accessories from our convenient home shopping network.  
Most importantly, you can count on our uncompromising commitment to  
your total satisfaction.  
All of this is our way of saying welcome - and thanks for investing in a  
PHILIPS product.  
P.S.To get the most from your PHILIPS purchase,  
be sure to complete and return your Product  
Registration Card at once.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
4. Follow all instructions.  
5. Do not use this apparatus near  
water.  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
6. Clean only with dry cloth.  
7. Do not block any ventilation  
openings. Install in accordance with  
the manufacturer´s instructions.  
15.Battery usage CAUTION To  
prevent battery leakage which may result in  
bodily injury, property damage, or damage  
to the remote control:  
8. Do not install near any heat sources  
such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Install all batteries correctly, + and - as  
marked on the remote control.  
9. Do not defeat the  
Do not mix batteries (old and new or  
safety purpose of the  
carbon and alkaline, etc.).  
polarized or  
grounding-type plug.  
Remove batteries when the unit is not used  
for a long time.  
A polarized plug has two blades with one  
wider than the other.A grounding type plug  
has two blades and a third grounding prong.  
The wide blade or the third prong are  
provided for your safety. If the provided plug  
does not fit into your outlet, consult an  
electrician for replacement of the obsolete  
outlet.  
16.Apparatus shall not be exposed to  
dripping or splashing.  
17.Do not place any sources of danger  
on the apparatus (e.g. liquid filled  
objects, lighted candles).  
18.This product may contain lead and mercury.  
Disposal of these material may be regulated  
due to environment considerations.  
10. Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
For disposal or recycling information,  
please contact your local authorities  
or the Electronic Industries Alliance :  
11.Only use attachments/accessories  
specified by the manufacturer.  
12.  
Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer or sold with  
the apparatus.When a cart is  
used, use caution when moving  
the cart/apparatus combination  
to avoid injury from tip-over.  
EL 6475-E004: 03/12  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English ------------------------------------------------ 8  
Français -------------------------------------------- 32  
Español --------------------------------------------- 59  
CAUTION  
Use of controls or adjustments or  
performance of procedures other  
than herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
ATTENTION  
L’utilisation des commandes ou  
réglages ou le non respect des  
procédures ci-incluses peuvent se  
traduire par une exposition  
dangereuse à l’irradiation.  
ATENCIÓN  
El uso de mando o ajustes o la  
ejecucción de métodos que no sean  
los aquí descritos puede ocasionar  
peligro de exposición a radiación.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
General Information  
Disc Operations  
Supplied accessories ............................................ 9  
Environmental information ................................ 9  
Maintenance .......................................................... 9  
Safety information ................................................ 9  
Playable discs ....................................................... 20  
Region codes  
Playing discs ......................................................... 20  
Selecting and searching ..................................... 21  
Selecting a different track/chapter  
Fast rewinding/forwarding  
Mounting the Set under a  
Cabinet  
Preparation .......................................................... 10  
Mounting the set ................................................ 10  
GOTO  
Different play modes:REPEAT, SHUFFLE and  
REPEAT A< >B.................................................... 22  
REPEAT  
SHUFFLE  
REPEAT A< >B  
Display information............................................ 23  
Programming tracks/chapters.......................... 23  
Installation  
Rear connections ............................................... 11  
Connecting FM/AM antennas  
ConnectingTV antenna/CATV  
Connecting an additional appliance  
DVD/VCD Features  
INTRO .................................................................. 24  
Playing in slow motion ...................................... 24  
ZOOM.................................................................. 24  
AUDIO ................................................................. 24  
SUBTITLE............................................................. 24  
Using the DISC MENU ..................................... 24  
Power supply ....................................................... 12  
Inserting batteries into the remote control. 12  
Setting the clock ................................................. 13  
Using theTV screen........................................... 13  
Controls  
Controls on the set ........................................... 14  
Remote control ........................................... 15~16  
DVD Setup Menu  
To navigate setup options................................. 25  
Basic Functions  
GENERAL SETUP PAGE .................................. 25  
TV DISPLAY  
ANGLE MARK  
OSD LANG  
Screen Saver  
Switching on/ to standby mode and  
selecting functions ............................................ 17  
Adjusting volume and sound............................ 17  
Adjusting volume  
PREFERENCE PAGE .......................................... 26  
PARENTAL  
DEFAULT  
DSC  
Mute ...................................................................... 17  
Display information............................................ 17  
Adjusting picture ................................................ 17  
PASSWORD SETUP PAGE .............................. 26  
Timer  
................................................................................ 27  
TV  
WatchingTV ........................................................ 18  
External AV Source  
................................................................................ 27  
Radio  
Tuning to radio stations .................................... 19  
Storing preset radio stations ........................... 19  
Manual programming  
Specifications  
................................................................................ 28  
Autostore:Automatic programming  
To listen to a preset station  
Troubleshooting  
................................................................................ 29  
Glossary  
................................................................................ 30  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
This set complies with the FCC rules,  
Part 15 and with 21 CFR 1040.10.  
Operation is subject to the following two  
conditions:  
– This device may not cause harmful  
interference, and  
– This device must accept any interference  
received, including interference that may  
cause undesired operation.  
Cleaning the disc lens  
After prolonged use, dirt or dust may  
accumulate at the disc lens.To ensure good  
playback quality, clean the disc lens with any  
commercially available cleaner. Follow the  
instructions supplied with cleaner.  
Safety information  
Place the system on a flat, hard and stable  
surface.  
Supplied accessories  
– DC 12V adapter with bracket  
– L-shape adapter (forTV ANT connector)  
– remote control with 2 x AA batteries  
– AM antenna  
– FM antenna  
– Mounting kit: template, 4 spacers, 8 screws  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers table-cloths, curtains, etc.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene and polyethylene (bags, protective  
foam sheet).  
The apparatus shall not be exposed to dripping  
or splashing.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialized company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
Maintenance  
Cleaning the Cabinet  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the center  
out.  
Do not use solvents such as  
benzene, thinner, commercially  
available cleaners, or antistatic spray intended for  
analog records.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting the Set under a Cabinet  
Mounting the Set  
Preparation  
For full details on how to use the Mounting kit,  
please refer to the printed instructions in the  
Quick Start Guide and Template.  
Ask a friend to help out.An extra hand to hold  
the set makes mounting easier and quicker.  
You may install the unit in the kitchen with or  
without spacers.  
a
Find a mounting location near a wall outlet.  
Mount it  
friend to help you mount the unit as it is quite heavy.  
Ask  
a
VIDEO AUDIO IN  
IN  
TV  
ANT  
L
R
DC  
A
Cut the template to fit inside the cabinet.  
A
Template  
Align the template border marked "FRONT"  
along the front edge of your cabinet.  
Use adhesive tape to fix the template.  
Recommended depth of cabinet  
at the rear to allow for connections  
FM  
Drill 1/4 inch holes (size X.X mm diameter, X  
inch), as marked X on the template.  
Remove the template when you finish drilling.  
AM  
Tip  
Use  
a
nail to start each drill hole.  
Hold your drill firmly at 90o with the cabinet bottom and drill holes at  
low speed.  
Clear wood shavings.  
Use 1/4"  
drill  
B
Using the spacers  
pairs of notch length  
B
Template  
On the spacers, there are  
options. Depending on the thickness of you cabi-  
net bottom (with/ without an overhang), these  
notch lengths correspond to the notch height in  
the space holders, and allow you to adjust to the  
best height to help you mount the unit.  
4
Spacer  
L
(Low)  
L••H (4 heights)  
Arrow  
4
Measure the height of the cabinet bottom  
and/overhang.  
urn the spacer counterclockwise to determine  
which of the heights is most suitable: High •  
Low  
Insert the spacers accordingly.  
T
4
C
a
Manually fasten the  
spacer holder holes to mount your set. If the  
4
screws down into the  
1/4 inch, use longer  
C
overhang is more than  
screws (not included).  
1
Tip  
T
o
prevent damage to your set, do not use an electric drill  
to cure screws when mounting!  
Hold the unit horizontally when installing it, since the CD tray may  
open if the unit is shaken.  
Use the cable manager to manage excess power cord length.  
FRONT  
b
IMPORTANT!  
– Never plug in the AC power cord to  
the power outlet before installation is  
completed.  
– Mount the set so that its AC power  
cord can be plugged directly into a wall  
outlet.  
b
c
Use the mounting template to test the design  
and thickness of your kitchen cabinet bottom.  
Decide whether you want to connect the set  
with other audio/ video equipment.  
– Do not use a converter or extension  
cord.  
- Install the set as far as possible from  
sources of interference, such as a  
refrigerator, microwave oven, fluorescent  
lamp, etc.  
There should be at least 2.5" distance  
between the unit and the wall.  
To reduce the risk of fire, do  
not place any heating or cooking  
appliance beneath the set, especially  
while the LCD screen is open or on  
view.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
ConnectingTV antenna/CATV  
As shown, plug the supplied L-shape adapter into  
TV ANT , and then connect aTV antenna/  
CATV cable (not supplied).  
Rear connections  
Warning:  
Never make or change connections with  
the mains supply switched on.  
Connecting FM/AM antennas  
Connect the supplied AM/FM antennas to listen  
to radio programs.  
FM ANT  
TV ANT  
AM ANT  
R
AUDIO IN  
L
VIDEO IN  
Supplied AM  
loop antenna  
Supplied FM antenna  
Connecting an additional  
appliance  
It is possible to use an additional appliance, e.g.  
VCR, video game player, with the set.  
FM ANT  
TV ANT  
AM ANT  
DC-12V  
R
AUDIO IN  
L
VIDEO IN  
FM ANT  
TV ANT  
AM ANT  
AM Antenna  
DC-12V  
R
AUDIO IN  
L
VIDEO IN  
AUDIO OUT  
VIDEO OUT  
Fix the claw  
to the slot  
External AV source  
1 Insert the red plug of the red/white audio cables  
(not supplied) to the red socket AUDIO IN R  
and the white plug to the white socket AUDIO  
IN L.  
2 Connect the other end of the audio cables to  
the AUDIO OUT terminals of the additional  
appliance.  
Position the antenna as far as possible from aTV,  
VCR or radiation source. If necessary, use 2  
small screws (supplied) to fix the antenna to a  
Helpful hints:  
If the connected device has only a single audio  
out terminal, connect it to the AUDIO IN L  
terminal.Alternatively, you can use a “single to  
double” cinch cable, but the output sound will  
remain mono.  
flat, hard and stable place.  
FM antenna:  
– Always refer to the owner’s manual of other  
equipment for complete connection.  
FM ANT  
1 Fully extend the FM antenna.  
2 Keep the FM antenna as horizontal as possible  
(as far away as possible from the AC adapter,  
VCR or other radiation sources).  
3 Fix the antenna’s end to the wall.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Power supply  
The type plate is located on the bottom  
panel.  
Inserting batteries into the  
remote control  
Insert two batteries (type R6 or AA) into the  
remote control with the correct polarity as  
indicated by the "+" and "-" symbols inside  
the battery compartment.  
FM ANT  
TV ANT  
AM ANT  
DC-12V  
R
AUDIO IN  
L
VIDEO IN  
DC-12V  
AC120V~  
Using the adapter bracket  
Find a suitable place to mount the adapter  
bracket.  
CAUTION!  
– Remove batteries if they are  
exhausted or will not be used for a long  
time.  
1 Use 2 small screws (supplied) to mount the  
bracket.  
– Do not use old and new or different  
types of batteries in combination.  
– Batteries contain chemical substances,  
so they should be disposed off properly.  
2 Insert the adapter into the bracket as shown.  
1
Helpful hints:  
– First, select the source you wish to  
control by pressing a source button(DVD,  
RADIO orTV for example).  
– Then, select the desired functions ( í,  
ë, for example).  
2
3
3 Use the adapter bracket to wrap and secure the  
power cord so that excess cord does not hang  
down.  
4 Make sure all connections have been been made  
before switching on the power supply.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Setting the clock  
Using theTV screen  
The set is equipped with a 7” TFT LCD  
monitor. You can watchTV on it. If you insert a  
disc, it will serve as an additional display for  
messages (e.g. PLAY, STOP), and information  
stored on the disc.  
The time is displayed using the 12-hour clock.  
1 Check the set is switched to standby mode.  
(see Basic Functions, Switch on/to  
standby)  
--:--flashes by default if the clock is not set..  
2 On the set, press CLK/DISP (or  
CLOCKSET on the remote control)  
The hour digits start flashing (AM 12: 00by  
default).  
maximu1m ,2  
115  
3 Hold down or press TUNING/CLOCK + or  
- repeatedly to set the hour. Release  
TUNING/CLOCK + or - when you have  
reached the correct setting.  
PUSH  
4 Press CLK/DISP to confirm the setting.  
The minute digits start flashing.  
270 maximum  
3
4
5 Repeat step 3 to set the minute.  
6 Press CLK/DISP to confirm the setting.  
1 Press PUSH at the bottom of the set to release  
TV panel.  
The clock shows the set time.  
Helpful hints:  
– You may lose your clock setting when the power  
cord is disconnected or power failure occurs.  
2 Pull the down the panel (maximum 1150).  
3Turn around the panel to find the screen.  
4Adjust the screen to a suitable angle (maximum  
2700).  
CLOCKSET  
PICTURE  
VOL  
DSC  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
$ 3 , 4 PRESET - / CH.DOWN, PRESET  
Controls on the set (illustrations  
on page 3)  
+ / CH.UP  
RADIO: selects a preset radio station  
(down, up)  
TV/CATV: selects aTV channel  
Front panel  
1 POWER  
switches the set on or to standby mode  
(down, up)  
% AUTO PROG/ RADIO PROG  
RADIO/TV: programs preset stations/channels  
2 ÉÅ PLAY/PAUSE  
starts or pauses disc playback.  
3 Ç STOP  
^ SOURCE  
selects functions: DVD (VCD, CD or MP3),  
RADIO,AV or TV/ CATV  
stops or pauses disc playback  
4 PREV à / á NEXT  
& REMOTE SENSOR  
DVD/VCD/CD: skips tracks or chapters  
sensor for the infrared remote control  
Helpful hints: Always point the remote control  
towards this sensor.  
backward/forward  
5 0 EJECT  
ejects a disc from the slot loader.  
Bottom panel  
* PUSH  
6 TUNING/CLOCK -, +  
RADIO: tunes to radio stations  
CLOCK: adjusts the hour/minute  
push here to release LCD monitor  
7 CLK/DISP  
( TV screen  
set clock time  
toggles clock (or timer) display and status  
of the set  
Rear panel  
) TV ANT  
8 Display  
connects to the externalTV antenna or CATV  
shows status of the set.  
¡ FM ANT  
9 TIMER  
connects the supplied wire antenna here.  
alarm timer with setting options from 1 to 180  
minutes  
AM ANT  
connects the supplied loop antenna here.  
0 VOLUME +/-  
adjusts the volume level  
£ DC 12V  
socket for the supplied 12V AC/DC adapter  
! MUTE  
switches the sound off temporarily  
VIDEO IN  
connects to theVIDEO OUT jack on the  
external appliance  
@ DSC (Digital Sound Control)  
selects predefined sound settings: CLASSIC, POP,  
MOVIE, SPEECH  
AUDIO IN (L/R)  
connects to the AUDIO OUT jack on the  
external appliance  
# BAND  
selects wavebands, FM or AM  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
1 Source buttons  
Remote control  
DVD (VCD/CD/MP3)  
selects disc functions: DVD,VCD, CD or MP3  
1
2
3
RADIO/BAND  
DVD  
selects the radio and toggles between the  
wavebands  
¤
AV  
4
TV  
SHUFFLE  
PROG  
5
6
7
selectsTV or CATV  
ERASE/WRITE  
2 STANDBY-ON  
switches the set on or to standby mode  
8
9
º
3 0 EJECT  
0
!
ejects a disc from the slot loader.  
ª
4 AV  
@
#
selects the input from an external connected  
appliance  
CLOCKSET  
PICTURE  
VOL  
$
%
^
§
5 SHUFFLE  
plays the disc in random order  
&
*
(
£
DSC  
6 DISPLAY  
toggles clock (or timer) display/ status of the set  
¡
)
7 PROG  
RADIO: programs preset stations  
DVD/VCD/CD: programs chapters/titles/tracks  
8 SETUP  
enters or exits the Setup menu.  
9 1 / 2 / 3 / 4  
IMPORTANT!  
navigation controls (left, right, up, down) to scroll  
through disc/menu options  
– First, select the source you wish to  
control by pressing a source button(DVD,  
RADIO orTV for example).  
– Then, select the desired functions ( í,  
ë, for example).  
1 / 2  
DISC: starts fast search backward or forward  
2X, 4X, 8X, 16X or 32X  
3 / 4  
RADIO: selects a preset radio station  
(up, down)  
TV/CATV: selects aTV channel (up, down)  
0 ENTER/ OK  
confirms selection  
CATV: selects HRC, IRC, STD or AUTO mode  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
£ A< >B Repeat  
repeats a section on a disc  
! ÉÅ PLAY/PAUSE  
starts/ pause disc playback  
REPEAT  
@ REW, FWD à /  
á
selects repeat modes  
starts fast search backward or forward 2X, 4X,  
8X, 16X or 32X  
SUBTITLE  
PREV, NEXT O P  
selects a subtitle language  
§ AUDIO  
selects audio channels or selects a sound track  
language in a DVD  
DVD/VCD/CD: skips tracks or chapters  
backward/forward  
# PICTURE  
toggle to select picture setting options: BRIGHT,  
CONTRAST, COLOR,TINT  
TUNING/CLOCK -, +  
RADIO: tunes to radio stations  
CLOCK: ajusts the hour/minute  
$ VOL +/-  
adjusts the volume level  
adjusts the picture values.  
CLOCK SET  
sets clock time.  
% ANGLE  
views picture from different recorded camera  
angles (if available on your disc)  
ª 9 STOP  
stops playback/ cancels program function.  
º DISC MENU  
^ ZOOM  
enlarges or reduces the video image during  
playback.  
enters or exits the disc content menu  
ERASE/WRITE  
TV/CATV: deletes/adds a programmed channel  
¤ Numeric Keypad (0-9)  
& GOTO  
goes directly to desired title, chapter, time or  
track.  
DVD/VCD/CD: selects a track/title/chapter  
number  
* INTRO  
DVD/VCD: gives you an overview of your disc  
contents: in digest or at 10-minute intervals  
( MUTE  
TV/CATV: selects aTV channel number  
turns on/off the speaker output.  
) OSD  
Enables or disables on-screen display  
¡ SLOW  
DVD/VCD: plays in slow motion: 1/2, 1/4, 1/8 or  
1/16.  
DSC (Digital Sound Control)  
selects predefined sound settings: CLASSIC, POP,  
MOVIE, SPEECH  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic functions  
Switching on/ to standby and  
selecting functions  
Display information  
During playback, press CLK/DISP to switch  
between the clock/timer display and the status of  
the set (or on the remote control, DISPLAY).  
1 Press POWER to switch on (or B on the  
remote control).  
2 To select your function, press SOURCE once  
or more (or DVD, RADIO/BAND,TV or AV  
on the remote control).  
TIMER  
CLOCK/TUNING  
CLK/DISP  
3 Press POWER to switch the set to standby (or  
B on the remote control).  
PRESS TO  
START STOP  
/
AJL700 KITCHEN DVD PLAYER  
Helpful hints:  
In the standby mode, the tone, sound settings,  
tuner presets, and the volume level (up to a  
maximum volume level of 20) will be retained in  
the set’s memory.  
Adjusting picture  
On theTV screen, you can adjust your picture  
settings: Brightness, Contrast, Color andTint.  
DVD  
AV  
SHUFFLE  
Adjusting volume and sound  
AdjustingVolume  
1 On the remote control, press PICTURE once  
or more to select BRIGHTNESS, CONTRAST,  
COLOR andTINT.  
Press VOL +/- to adjust the volume.  
Display shows VOLUME and. a number from  
00 to 32.  
2 Press VOL +/- to adjust the value between 00  
and 100.  
DSC  
CLOCKSET  
PICTURE  
Digital Sound Control enables you to select  
predefined sound settings.  
VOL  
Press DSC repeatedly to select your desired  
sound setting:  
CLASSIC, POP, MOVIE or SPEECH is  
displayed.  
DSC  
Press OSD to check your DSC setting.  
MUTE  
During playback, you can temporarily switch off  
the sound without switching off the set.  
1 Press MUTE to switch off the sound.  
MUTE appears on theTV screen .  
Playback continues without sound.  
2 To switch on the sound, press MUTE again or  
adjust the volume with VOL controls.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV  
WatchingTV  
5 Press PRESET - / CH.DOWN, PRESET + /  
CH.UP to select your desired channel (on the  
1 Check yourTV set has been properly connected  
and placed. (see Installation, ConnectingTV  
antenna/CATV and Using theTV Screen)  
2 On the remote control, press B to on, then  
press TV once or more to selectTV or CATV  
mode (or on the set, POWER and SOURCE).  
remote control, 3 , 4)  
or  
Use the Numeric Keypad (0-9) on the  
remote control to select the channel number  
directly. e.g.  
Channel 2: Press 0 and then, 2  
Channel 10, Press 1 and then, 0  
3 In CATV, press ENTER on the remote control  
to select HRC, IRC, STD or AUTO mode.  
To erase/ overwrite current presets  
You can erase a preset channel by storing  
another channel in its place.  
DVD  
1 Select the channel you want to erase.  
2 On the remote control, press ERASE/WRITE  
once or more until ERASE appears  
The erased channel number appears in red.  
3 Press ERASE/WRITE again until ADD  
appears.  
4 Use the Numeric Keypad (0-9) on the  
remote control to enter your desired channel  
number  
AV  
SHUFFLE  
ERASE/WRITE  
PROG  
The stored channel number appears in green.  
4 The first time you use theTV, press AUTO  
PROG /RADIO PROG on the set.  
Channel number starts running.  
Available channels are programmed.  
After all channels are stored, the first  
autostore channel will then automatically play.  
TIMER  
EJECT  
CLOCK/TUNING  
CLK/DISP  
PRESS TO  
START STOP  
/
AJL700 KITCHEN DVD PLAYER  
-
AUTO PROG/  
PRESET  
/
PRESET+  
CH. UP  
/
RADIO PROG CH. DOWN  
BAND  
DSC  
MUTE  
VOLUME  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio  
Autostore: automatic programming  
Tuning to radio stations  
Autostore automatically starts programming  
radio stations from preset 1.Any previous  
presets e.g. manually programmed will be  
erased.  
1 Press POWER to on, then press SOURCE  
once or more to select RADIO mode.(or on the  
remote control, B and RADIO/BAND).  
Display: The waveband, radio station  
frequency and if programmed, a preset number  
are shown.  
Press and hold AUTO PROG /RADIO  
PROG until AUtO appears.  
Available stations are programmed (20FM  
and 10 AM).  
After all stations are stored, the first  
autostore preset station automatically plays.  
2 Press BAND once or more to select your  
waveband: FM or AM (or RADIO/BAND on  
the remote control)  
3 Press and hold TUNING/CLOCK -, + until  
the frequency in the display starts running.  
The radio automatically tunes to a station of  
sufficient reception. Display shows Srch during  
automatic tuning.  
To listen to a preset station  
Press PRESET - / CH.DOWN, PRESET +  
/ CH.UP until the desired preset station is  
displayed (or on the remote control 3, 4).  
4 Repeat step 3 if necessary until you find the  
desired radio station.  
To tune to a weak station, press TUNING/  
CLOCK -, + briefly and repeatedly until optimal  
reception is found.  
DVD  
Storing preset radio stations  
You can store up to 30 preset radio stations in  
the memory (20 FM and 10AM).  
AV  
SHUFFLE  
Manual programming  
ERASE/WRITE  
1 Tune to your desired radio station (see “Tuning  
to radio stations”).  
2 Press AUTO PROG/ RADIO PROG to  
activate programming. (or PROG on the  
remote control).  
Display shows: current radio frequency and  
PROG flashes.  
3 Press PRESET - / CH.DOWN, PRESET + /  
CH.UP to select a preset number. (on the  
remote control, 3 , 4)  
4 Press AUTO PROG/ RADIO PROG to  
confirm.  
CLOCKSET  
PICTURE  
Display: PROG disappears.  
5 Repeat steps 1-4 to store other stations.  
VOL  
Helpful hints:  
– You can erase a preset station by storing  
another frequency in its place.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations  
IMPORTANT!  
– Use 12cm discs only!  
Playing discs  
1 Press POWER to on, then press SOURCE  
once or more to select DVD mode.(or on the  
remote control, B and DVD).  
– The set is designed for regular discs.  
Therefore, do not use any accessories  
such as disc stabilizer rings or disc  
treatment sheets, etc.  
– Depending on the format of DVDs or  
VCDs, some operations may be different  
or restricted.  
2 Insert a 12cm disc into the slot loader.  
Insert a disc in DVD mode. Make sure you  
have removed any other disc fromthe loader.  
Make sure the label side is facing up. For  
double-sided discs, load the side you want to  
play facing down.  
– If the inhibit icon appears on theTV  
screen when a button is pressed, it  
means the function is not available on  
the current disc or at the current time.  
– CDs encoded with copyright  
protection technologies by some record  
companies may be unplayable on this  
system.  
Insert a  
12 cm disc  
Playable discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs).  
– Video CDs (VCDs).  
– Super Video CDs (SVCDs).  
– DigitalVideo Discs + Recordable  
(DVD+R).  
– DigitalVideo Discs + Rewritable  
(DVD+RW).  
– Compact Discs (CDs).  
– MP3 disc on CD-R (W).  
– Maximum 16 characters display.  
– Supported sampling frequencies: 32 kHz, 44.1  
kHz, 48 kHz.  
3 Playback will start automatically (depending on  
the disc type).  
If a disc menu appears on the screen, use the  
navigation controls 1 / 2 / 3 / 4 and  
ENTER /OK to select your playback options.  
If the disc is locked by parental control, see  
DVD Setup Menu, PREFERENCE PAGE.  
– Supported Bit-rates: 32~192 kbps, variable  
bitrates.  
– Picture (JPEG) files on CD-R(W).  
– JPEG/ISO 9660 format.  
4 To pause playback., press 9 STOP .  
5 Press ÉÅ to resume playback from the last  
position.  
6 To stop playback, press 9 STOP again.  
7 To remove the disc, press 0 EJECT .  
Region Codes  
To play on this DVD player, DVDs must be  
labelled for ALL regions or Region 1.You  
cannot play discs that are labeled for other  
regions.  
Note:  
– If you are having trouble playing a certain disc,  
remove the disc and try a different one. Improper  
formatted discs will not play on this DVD Player.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations  
Selecting and searching  
Selecting a different track / chapter  
For DVD/VCD/CD:  
During playback, briefly press PREV à / á  
NEXT once or more until your desired track/  
chapter number appears (or on the remote  
control, PREV, NEXT O P)  
or  
Use the Numeric Keypad (0-9) on the  
remote control to select the track/chapter  
number directly. e.g.  
CLOCKSET  
PICTURE  
Track/chapter 2: Press 0 and then, 2  
Track/chapter10, Press 1 and then, 0  
VOL  
For MP3/JPEG:  
Use the navigation controls 1 / 2 / 3 / 4  
and ENTER /OK to select the desired file or  
file folder.  
DSC  
Fast rewinding/fowarding  
1 During playback, press REW, FWD à /  
á
or 1 / 2 on the remote control repeatedly  
to select fast search speed (x2, x4, x8 , x16 or  
x32).  
The disc plays at a high speed.  
2 When you recognize the passage you want,  
pressÉÅ or ENTER /OK  
Normal playback resumes.  
GOTO  
1 During playback, press GOTO once or more  
on the remote control.  
DVDs: A TITLE & CHAPTER bar appears  
on theTV screen.  
VCD/Audio CD:  
--:-- appears on theTV screen for you to enter  
the desired minutes and seconds (in 2 digits), or  
T: --/ XX appears for you to enter the desired  
track number (in 2 digits)  
MP3: --- appears for you to enter the  
desired track number (in 3 digits)  
2 Use the Numeric Keypad (0-9) to enter the  
desired chapter/title / track time/ track number.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations  
Repeat A<>B  
Different play modes: REPEAT,  
SHUFFLE and REPEAT A<>B  
REPEAT  
You can play a certain scene or passage  
repeatedly.  
1 During playback , press A<>B on the remote  
control to mark the start point of the chosen  
scene or passage.  
DVDs:  
CHAPTER: Repeats current chapter  
TITLE: Repeats current title  
ALL: Repeats the entire disc  
REPEAT OFF: cancels repeat options  
A appears in theTV screen.  
2 Press A<>B again at your chosen end point.  
AB appears .  
3 To return to normal playback, press A<>B  
repeatedly until A or B disappears .  
Audio CDs:  
TRACK: plays current track repeatedly.  
ALL: plays all the tracks repeatedly.  
REPEAT OFF: cancels repeat options  
You can also press Ç to cancel your play  
modes.  
MP3/JPEG:  
SINGLE: plays a selected file  
REPEAT ONE: plays an MP3 file repeatedly or  
keep a JPEG image still on the screen.  
REPEAT FOLDER: plays all files in the  
selected folder repeatedly.  
ERASE/WRITE  
PROG  
FOLDER: plays a selected file folder  
1 During playback, press REPEAT once or more  
to select play modes.  
2 To return to normal playback, press REPEAT  
repeatedly until REPEAT OFF appears.  
CLOCKSET  
PICTURE  
You can also press Ç to cancel your play  
modes  
VOL  
SHUFFLE  
You can play the contents in a disc in a random  
order.  
DSC  
During playback, press SHUFFLE once or  
more to select or cancel SHUFFLE mode  
You can also press Ç to cancel your play  
modes.  
MP3 only:  
SHUFFLE: plays all files in the selected folder  
in random order.  
FOLDER: plays a selected file folder  
1 Press SHUFFLE once or more to select play  
**The REPEAT A-B function can only be set  
within the same chapter or track.  
modes.  
2 To return to normal playback, press Çand then,  
ÉÅ .  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations  
Display information  
Programming tracks/chapters  
You can select and program 20 tracks/ chapters  
for playback. If you like, store any track/chapter  
more than once.  
During playback, press DISPLAY on the  
remote control repeatedly to select your display  
options:  
CDs/VCDs/DVDs:  
CDs/VCDs:  
1 Press PROG to activate programming mode.  
The program pop-up appears for you to  
enter the desired track/chapter numbers.  
SINGLE ELAPSED - elapsed playback time  
of current track.  
SINGLE REMAIN - remaining time of current  
track.  
TOTAL ELAPSED - elapsed playback time of  
disc.  
TOTAL REMAIN - remaining playback time of  
disc.  
DVDs:  
TITLE ELAPSED - elapsed playback time of  
current title.  
TITLE REMAIN - remaining time of current  
title.  
CHAPTER ELAPSED - elapsed playback  
time of current chapter.  
CHAPTER REMAIN - remaining time of  
current chapter.  
2 Use the navigation controls 1 / 2 / 3 / 4  
on the remote control to select your desired  
program position.  
If you need to go the next /previous page to  
continue programming, navigate to highlight  
**Options available subject to type of disc. Not  
available for MP3-CDs.  
4 / ¢.  
3 Use the Numeric Keypad (0-9) on the  
remote control to enter your desired track/  
chapter number (in 2 digits)  
E.g. Track/chapter 7, press 0 and then, 7.  
4 To start playback, navigate to highlight START.  
DVD  
If necessary, press ENTER/ OK to confirm.  
Erasing the program  
AV  
Either:  
SHUFFLE  
Press PROG again, or  
Use the navigation controls 1 / 2 / 3 / 4to  
highlight EXIT.  
ERASE/WRITE  
The program pop-up disappears.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD/VCD Features  
INTRO  
Playing in slow motion  
This feature gives you an overview of the disc  
contents.  
1 Press SLOW repeatedly on the remote control  
during playback to select the desired speed: 1/2,  
1/4, 1/8 or 1/16  
DVDs:  
TITLE DIGEST: A thumbnail picture appears  
for each title in current chapter  
CHAPTER DIGEST: A thumbnail picture  
appears for each chapter in the disc  
TITLE INTERVAL: Thumbnail pictures appear  
for current title at 10-minute interval.  
DISC INTERVAL: Thumbnail pictures appear  
for the disc at 10-minute interval.  
Sound will be muted.  
2 To return to normal speed, pressÉÅ PLAY/  
PAUSE (or Press SLOW repeatedly until the  
speed number disappears).  
ZOOM  
Zooming allows you to enlarge or reduce the  
video/ JPEG image during playback.  
VCDs:  
TRACK DIGEST: A thumbnail picture  
appears for each track in the disc  
DISC INTERVAL: Thumbnail pictures appear  
for the disc at 10-minute interval.  
TRACK INTERVAL: Thumbnail pictures  
appear for current track at 10-minute interval.  
Press ZOOM repeatedly to zoom in and out on  
the playback video image.  
Image size enlarges at 2X, 3 X, 4 X or  
reduces at 1/2, 1/3, 1/4 .  
To return to normal playback, press ZOOM  
repeatedly until the numbers disappear  
1 On the remote control, press INTRO to go to  
the SELECT DIGESTTYPE page.  
2 Use the navigation controls 1 / 2 / 3 / 4to  
AUDIO  
DVDs:  
select your option.  
On the remote control, press AUDIO  
repeatedly to select the desired language for  
sound track  
3 Press ENTER /OK to confirm.  
Thumbnail pictures appear in the selected  
mode.  
4 To return to normal playback, press INTRO.  
VCDs/CDs:  
Press AUDIO repeatedly to select the audio  
channel for sound output:  
MONO LEFT - MONO RIGHT - MIX MONO  
- STEREO  
SUBTITLE (DVD only)  
Press SUBTITLE on the remote control  
CLOCKSET  
PICTURE  
repeatedly to select different subtitle languages.  
VOL  
Using the DISC MENU (DVD  
only)  
1 During playback, press DISC MENU on the  
DSC  
remote control to enter the disc menu.  
2 Use the navigation controls 1 / 2 / 3 / 4to  
select your playback options.  
3 Press ENTER /OK to confirm.  
4 Press DISC MENU to exit.  
** DISC MENU available subject to format of  
disc.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Setup Menu  
To navigate setup options  
In the stop mode of DVD, use the remote  
control to select the setup options.  
GENERAL SETUP PAGE  
1 Press SETUP to enter SETUP mode  
2 Press 1 / 2 to select the desired SETUP page:  
GENERAL SETUP PAGE, PREFERENCE  
PAGE and PASSWORD SETUP PAGE  
3 Press 3 / 4to highlight an option.  
4 Enter its submenu by pressing 2.  
5 Move the cursor by pressing 3 / 4 to highlight  
the selected item.  
6 Press ENTER/OK to confirm.  
TV DISPLAY (defaultWIDE)  
ERASE/WRITE  
PROG  
Select PS (Pan and Scan) forTV display at 4:3  
aspect ratio if your DVD is not formatted for  
widescreen viewing  
Select LB (Letterbox) forTV display at 4:3  
aspect ratio if your DVD is formatted for  
widescreen viewing.  
Select WIDE forTV display at 16:9 aspect ratio.  
ANGLE MARK (default OFF)  
Views picture from different recorded camera  
angles (if available on your disc).  
Select ON or OFF.  
OSD LANG (default English)  
There are three different OSD languages for  
selection.  
Select English, French or Spanish.  
Screen Saver (default ON)  
The screen saver appears after 3 minutes in the  
pause/ stop mode.  
Select ON or OFF.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Setup Menu  
DEFAULT  
PREFERENCE PAGE  
PARENTAL  
You can use this function to reset all settings  
except for your PARENTAL password.  
The rating of DVD discs equipped with the child  
lock function is content-based and varies with  
different discs. Depending on the particular disc,  
you can lock out selected scenes or playback of  
the entire disc.  
1 Use the navigation controls to select  
DEFAULT.  
2 Press 2 to select RESET.  
3 Press OK to confirm.  
The rating options are shown onscreen in  
descending order of suitability for children.  
For example, setting a rating at PG will lock out  
playback of scenes rated PG-13 onwards.  
PASSWORD SETUP PAGE  
You can change the PARENTAL password  
(3308 by default).  
To set your parental rating  
1 In PREFERENCE PAGE, Press 4to select  
To change your password  
PARENTAL.  
1 In PASSWORD SETUP PAGE. Press 4to  
2 Press 2 to enter the options:  
select PASSWORD.  
KID SAFE  
G
PG  
PG - 13  
PGR  
2 Press 2to select CHANGE.  
The Password pop-up appears.  
R
NC - 17  
ADULT  
3 Press 3 / 4to select your option.  
4 Press OK to confirm.  
The password pop-up appears  
5 Use the Numeric Keypad (0-9) on the  
remote control to enter your 4-digit password  
(3308 by default)  
3 Use Numeric Keypad (0-9) on the remote  
control to enter your old and new passwords  
in the 3 boxes.  
To change the password, see PASSWORD  
SETUP PAGE  
4 Press OK to confirm.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer  
External AV Source  
External AV source  
TIMER  
It is possible to use an additional appliance, e.g.  
VCR, video game player, with the set.  
Set the timer period to activate a beeper alarm.  
Setting the timer  
1 Check the external appliance has been properly  
connected (see Installation, Connecting an  
additional appliance).  
1 On the set, press TIMER to activate.  
Display shows TIMERand the 000digits  
flashes.  
2 Press POWER to on, then press SOURCE to  
select AV source (or on the remote control, B  
and AV).  
2 Turn the TIMER control counter-/clockwise to  
adjust your timer period (from 001 to 180  
minutes.)  
3 To avoid noise distortion, turn down the volume  
on your external device.  
3 Press TIMER again (within 90 seconds) to  
confirm.  
4 Press the PLAY key on the connected appliance  
to start playback.  
Timer period starts to count down.  
5 To adjust the sound and volume, use the sound  
controls on your external equipment and the  
AJL700.  
To cancel the timer  
Press TIMER during the countdown.  
Clock time appears.  
TIMER  
G
R
PRESS TO  
START/STOP  
PLAYER  
MUTE  
VOLUME  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DISC PLAYER  
LCD screen size................................................... 7 inches  
Laser wavelength ...................................................................  
................. (CD) 790 + 20nm /(DVD) 655+ 15nm  
Video system ............................................................. NTSC  
Video resolution ......................................... > 250 lines  
Video signal-to-noise ............................................... 60dB  
Frequency response .............................. 20Hz~20kHz  
Audio signal-to-noise .......................................... 60dB  
Audio distortion + noise............... 65 dB (1kHz)  
Channel separation ............................. 45dB (1kHz)  
Dynamic range ........................................................... 70dB  
Radio  
System ................................................................................. PLL  
Frequency range  
AM........................................................... 530~1700 kHz  
FM ............................................................ 87.5~108 MHz  
GENERAL  
Power................................... AC100V~240V, 50/60Hz  
Power consumption ............................................ 30W  
Dimension .... 370mmx270mmx75mm (W/H/D)  
........................................... 14.6” x 10.6” x 3” (W/H/D)  
Weight ..............................................................About 6lb  
Philips reserves the right to make design  
and specification changes for product  
improvement without prior notice.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
PHILIPS for help.  
Problem  
Solution  
Disc cannot play  
Make sure a disc is loaded.  
Make sure a disc is loaded with the label side up.  
Disc dirty or damaged. Clean the disc.  
Make sure the region code of the player is the  
same as that of the DVD disc loaded.  
Moisture has condensed in the player. Remove  
the disc and leave the player power-on until the  
moisture evaporates.  
Check whether the set is connected securely.  
Make sure the set is not in the MUTE mode. If it  
is, press MUTE to turn on the speaker.  
Check whether the volume on the set has been  
set to the lowest level. If it has, turn up the  
volume.  
No sound  
Check whether the set is connected securely.  
No picture  
First, select the source you wish to control by  
pressing a source button (DVD, RADIO orTV  
for example).Then, select the desired functions  
(í, ë, for example).  
Remote control does not work  
Remove obstacles between the remote control  
and the player, and point directly instead of at a  
wide angle at the infrared sensor on the player.  
Make sure the battery has been inserted  
properly (check polarity).  
Battery maybe exhausted. Replace the battery  
with a new one.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the set and aTV,  
VCR or radiation source.  
Radio reception is poor.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock.  
The Clock setting is erased.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image.The  
horizontal vs. vertical ratio of conventionalTVs. is  
4:3, and that of wide-screens is 16:9.  
Region code: A system allowing discs to be  
played only in preset regions.This unit will only  
play discs that have compatible region codes.You  
can find the region code of your unit from the  
product label. Some discs are compatible with  
more than one region (or ALL regions).  
Bit Rate: The amount of data used to hold a  
given length of music; measured in kilobits per  
second, or kbps. Or, the speed at which you  
record. Generally, the higher the bit rate better  
the sound quality. However, higher bit rates use  
more space on a Disc.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or  
the entire album in audio software. Each title is  
assigned a title number enabling you to locate  
the title you want.  
Chapter: Sections of a picture or a music  
piece on a DVD that are smaller than titles.A  
title is composed of several chapters. Each  
chapter is assigned a chapter number enabling  
you to locate the chapter you want.  
Disc menu: A screen display prepared for the  
selection of images, sound, subtitles, multi-angles,  
etc recorded on a DVD.  
JPEG: A still-picture data compression system  
proposed by the Joint Photographic Expert  
Group, which features small decrease in image  
quality in spite of its high compression ratio.  
MP3: A file format with a sound data  
compression system,MPE” is the abbreviation of  
Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3.Through the MP3 format, one  
CD-R or CD-RW can contain about 10 times as  
much data volume as a regular CD can.  
Parental control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
software’s level is higher than the user-set level.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS LIMITED WARRANTY  
90 Days Free Product Exchange  
WHERE WARRANTY EXCHANGE IS AVAILABLE:  
PHILIPS CONSUMER ELECTRONICS warrants this  
product against defect in material or workmanship, subject to  
any conditions set forth as follows:  
Exchange is available in all countries where Philips officially dis-  
tributes the product. In countries where Philips does not dis-  
tribute the product, the local Philips organization will attempt to  
exchange the product, although there may be a delay if the  
appropriate product is not readily available, or special customs  
processes are implied.  
PROOF OF PURCHASE:  
You must have proof of the date of purchase to exchange the  
product.A sales receipt or other document showing the prod-  
uct and the date that you purchased the product as well as the  
authorized retailer included, is considered such proof.  
FOR EXCHANGE INTHE U.S.A., PUERTO RICO, OR  
U.S.VIRGIN ISLANDS…  
Contact Philips Customer Care Center at:  
1-888-PHILIPS (1-888-744-5477)  
COVERAGE:  
Warranty coverage begins the day you buy your product. For a  
period of ninety (90) days from the date of purchase, if the  
product is determined to be defective, Philips will exchange the  
defective product with a new or renewed product, at its option,  
at no charge.The replacement product is covered only for the  
warranty period of the original product.When the warranty on  
the original product expires, the warranty on all replaced prod-  
FOR EXCHANGE IN CANADA…  
1-800-661-6162 (French Speaking)  
1-888-PHILIPS (1-888-744-5477) - (English or Spanish  
Speaking)  
ucts also expires.When it is necessary for you to ship the prod- REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS  
uct to Philips for exchange, you will pay the shipping cost for  
shipment to Philips. Philips will pay the shipping costs when  
returning a product to you.  
THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS  
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR  
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE  
Note:The exchange model supplied will be the most compatible EXTENT PROHIBITED BY APPLICABLE LAW,ANY IMPLIED  
one in Philips current inventory. Shipping of your product to WARRANTY OF MERCHANTABILITY OR FITNESS FOR A  
Philips implies intent to follow the specified requirements of the PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN  
warranty and exchange program. Product received by Philips  
cannot be returned. Replacement product can only be sent if all  
warranty requirements are met. Failure to follow all require-  
ments can result in delay of exchange process.  
DURATION TO THE DURATION OF THIS WARRANTY.  
Some states do not allow the exclusions or limitation of inci-  
dental or consequential damages, or allow limitations on how  
long an implied warranty lasts, so the above limitations or exclu-  
sions may not apply to you. In addition, if you enter into a ser-  
vice contract agreement with the PHILIPS partnership within  
ninety (90) days of the date of sale, the limitation on how long  
EXCLUDED FROM WARRANTY COVERAGE  
Your warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust- an implied warranty lasts does not apply.  
ment of customer controls on the product, and installation  
or repair of antenna systems outside of the product.  
Product repair and/or part replacement because of improper  
installation, connections to improper voltage supply, abuse,  
neglect, misuse, accident, unauthorized repair or other cause  
not within the control of Philips.  
Damage occurring to product during shipping when improp-  
erly packaged or cost associated with packaging.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for  
which it was designed, manufactured, approved and/or autho-  
rized, or repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Products lost in shipment & no signature verification of  
receipt can be provided.  
Product sold AS IS or RENEWED.  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips, P.O. Box 671539, Marietta, GA. 30006-0026  
(Warranty: 4835 710 27550)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips CRT Television TS2744C User Manual
Philips Home Theater System FR 984 User Manual
Philips Stereo Amplifier TDA7056AT User Manual
Philips TV Cables SWV6375 10 User Manual
Philips TV VCR Combo PV1821 User Manual
Philips VCR VR250 User Manual
Pioneer Headphones SE DIR800C User Manual
POSIFLEX Business Machines Door KP 300 User Manual
Poulan Snow Blower 421888 User Manual
Princeton Home Security System 4411 0139 User Manual