Philips MP3 Docking Station AS170 User Manual

Always there to help you  
Register your product and get support at  
AS170  
Question?  
Contact  
Philips  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the disconnect device shall remain readily  
operable.  
1 Important  
Important Safety Instructions  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings.  
Install in accordance with the  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
Only use attachments/accessories specified  
by the manufacturer.  
Only use power supplies listed in the user  
manual.  
Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
Apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plug-in  
Adaptor is used as the disconnect device,  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2 Your Docking  
System for  
Android™  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Introduction  
With this docking system, you can:  
enjoy audio from your Bluetooth devices  
or other external audio devices;  
charge your android-powered device;  
listen to FM radio; and  
wake up to buzzer alarm or radio.  
What's in the box  
Check and identify the contents of your  
package:  
Main unit  
Power adapter  
Audio input cable (3.5 mm connectors)  
Short user manual  
Safety and notice  
Quick start guide  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Overview of the docking  
system  
a
g
f
b
c
d
e
h
i
m
l
k
j
f SOURCE/SET  
a POWER  
Press to select a source: FM preset, FM,  
Press to turn on the docking system or  
Bluetooth, or AUX IN.  
switch it to standby mode.  
Press and hold to start to set the clock.  
Press and hold to store preset radio  
stations.  
b AUDIO IN  
Connect an external audio device.  
g Wheel  
Rotate to adjust the height of micro  
USB connector.  
c CHARGING  
Charge your mobile phone.  
d FM ANTENNA  
h AL1/AL2  
Improve FM reception.  
Press and hold to start to set alarm.  
e DC IN  
Press to view alarm settings.  
Press to activate or deactivate alarm  
timer.  
Connect to the power adapter.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
i SNOOZE/BRIGHTNESS/SLEEP  
Press and hold to set sleep timer.  
Press to adjust display brightness.  
Press to snooze alarm.  
j Display panel  
Show current information.  
k VOLUME +/-  
Press to increase or decrease the  
volume.  
l -TUNE/TIME/TUNE/TIME +  
Press and hold to search for FM radio  
stations.  
Press to tune to FM radio stations in  
FM mode.  
Press to select a preset radio station in  
FM preset mode.  
Press to set the clock.  
m Micro USB connector  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON  
Standby  
3 Get started  
POWER  
Always follow the instructions in this chapter in  
sequence.  
Connect power  
Caution  
Risk of product damage! Make sure that the power  
supply voltage matches the voltage printed on the  
bottom of the docking system.  
Risk of electric shock! When you unplug the AC  
adapter, always pull the plug from the socket. Never  
pull the cord.  
Switch to standby mode  
Press POWER again to switch the docking  
system to standby mode.  
» The clock (if set) is displayed.  
Note  
The type plate is located on the bottom of the docking  
system.  
Select a source  
Press SOURCE/SET repeatedly to select a  
source: FM preset, FM, Bluetooth, or AUX in.  
Connect the AC power adapter between  
the DC IN socket at the back of the  
docking system, and  
Note  
the power supply.  
When an android-powered device is docked, the  
system automatically switches to Bluetooth mode.  
Set time  
1 Press and hold SOURCE/SET for two  
seconds.  
» [24H] or [12H] begins to blink.  
2 Press -TUNE/TIME or TUNE/TIME+ to  
select [24H] or[12H] for 12 or 24 hour  
format.  
Turn on  
Press POWER.  
» The docking system switches to the last  
selected source.  
3 Press SOURCE/SET to confirm.  
» The hour and minute digits begin to  
blink.  
4 Press -TUNE/TIME or TUNE/TIME+  
repeatedly to set the hour.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
5 Press SOURCE/SET to confirm.  
» Minute digits begin to blink.  
6 Press -TUNE/TIME or TUNE/TIME+  
repeatedly to set the minute.  
7 Press SOURCE/SET to confirm.  
» The set time is displayed.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
4 Play through  
Bluetooth  
Philips does not guarantee the compatibility with all  
Bluetooth devices.  
Before pairing a device with this docking speaker, read  
its user manual for Bluetooth compatibility. Make sure  
that the connected Bluetooth device supports the  
Advanced Audio Distribution Profile (A2DP) and the  
AudioVideo Remote Control Profile (AVRCP).  
The product can memorize a maximum of 4 paired  
devices.  
Make sure that Bluetooth function is enabled on your  
device, and your device is set as visible to all other  
Bluetooth devices.  
With AS170, you can enjoy audio in two ways:  
through manual Bluetooth connection;  
through automatic Bluetooth connection  
with Philips Bluetooth Audio Connect  
app.  
The operational range between this docking speaker  
and a Bluetooth device is approximately 10 meters  
(30 feet).  
Any obstacle between this docking speaker and a  
Bluetooth device can reduce the operational range.  
Keep away from any other electronic device that may  
cause interference.  
Compatible with Android™  
To make full use of your docking system, your  
Android-powered device should satisfy the  
following requirements:  
With Android operation system  
(Version 2.1 or above);  
With Bluetooth software (Version 2.1  
or above); and  
Pair with Bluetooth devices  
1 Press POWER to turn on the docking  
With a micro USB connector.  
system.  
For other devices with micro USB connector  
and Bluetooth function, you can still use the  
docking system to do the the following:  
2 Press SOURCE/SET to select Bluetooth  
mode.  
» The Bluetooth indicator blinks on the  
display panel.  
Charge your device through the USB  
connector;  
Enjoy audio through Bluetooth.  
Play audio through manual  
Bluetooth connection  
The docking speaker uses Bluetooth wireless  
technology to stream music from your portable  
device to the speaker.  
3 On your Android-powered devices,  
activate the Bluetooth feature and search  
for AS170.  
4 In the device list, tap PHILIPSAS170.  
» After a successful connection, AS170  
beeps twice and the Bluetooth  
indicator turns steadily on.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
enjoy the feature, you are recommended to  
download and install this free app.  
Install Philips Bluetooth Audio  
Connect app  
You can search Philips Bluetooth Audio  
Connect from Google Play directly, and then  
install the app.  
Note  
Make sure that your Android device is connected to  
the Internet.  
Make sure that Google Play is available on your  
Android device.  
5 Play audio on your Bluetooth device.  
» Audio comes out through the docking  
system.  
1 Search for Philips Bluetooth Audio  
Connect app on the Play Store of your  
device.  
2
From the search result list, find and tap  
Philips Bluetooth Audio Connect to start  
downloading.  
3 Follow the onscreen instructions to install  
the Philips Bluetooth Audio Connect.  
4 When installation is complete, tap Done.  
» Two Philips Bluetooth Audio Connect  
widgets are installed and saved at the  
widgets screen.  
Tip  
To clear paired devices from AS170, press and hold  
POWER for five seconds.  
Apps  
Play audio through auto  
Bluetooth connection with  
Philips Bluetooth Audio  
Connect  
Add the Philips widget to your Home  
screen  
Philips Bluetooth Audio Connect establishes  
automatic Bluetooth connection by adding a  
shortcut of your docking system to the Home  
screen of your Android-powered device.To  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Add one or both of the widgets to the Home  
screen of your Android device (refer to the  
user manual of your device).  
Philips Bluetooth Audio Connect 2 X 1:  
add one of your favorite Bluetooth devices  
Searching ...  
» The widget starts to search and  
connect Bluetooth devices that can be  
paired automatically.  
Add device  
» The Bluetooth feature of your device is  
activated automatically.  
Philips Bluetooth Audio Connect 4 X  
1: add three of your favorite Bluetooth  
devices  
Connecting...  
Add device  
Add device  
Add device  
If necessary, select AS170 from the  
Available Philips BT devices list to  
continue the connection.  
Activate Bluetooth with Philips  
Bluetooth Audio Connect  
Add AS170 to your Home screen  
Note  
Make sure that AS170 is switched on.  
1 Press SOURCE/SET to select Bluetooth  
» It may take a few seconds to complete  
mode.  
the connection.  
2 On the Home screen of your Android  
device, tap the widget to search and  
connect other Bluetooth devices.  
» After a successful connection, AS170 is  
added to the Home screen, a different  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth icon is displayed on the top  
of the screen.  
2 Play audio on your Android device.  
» The audio comes out through the  
docking system.  
» AS170 beeps twice.  
Remove AS170 from Home screen  
1 Tap on the top of the widget.  
» A list of Available Philips BT devices is  
displayed.  
7
2 Select AS170.  
3 If necessary, tap on the top of the  
widget to rename or change the icon of  
AS170.  
Tap AS170 and input the new name.  
Tap the check box to change the icon  
of your device.  
Remove  
AS170  
3 Tap Remove.  
Remove  
AS170  
4 Play audio on your Android device.  
» The audio comes out through the  
docking system.  
Next-time launch  
1 Next time you switch on AS170,the  
docking system connects to the last paired  
device automatically.  
Disconnect a device  
If two or three paired devices are  
switched on, tap AS170 on your  
Android device to pair.  
To disconnect a Bluetooth device,  
Press SOURCE/SET to select another  
source.  
Deactivate Bluetooth function on your  
device; or  
» After a successful connection, a  
different Bluetooth icon is displayed  
on the top of the screen and AS170  
beeps twice.  
Move it beyond the communication range.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
» The Bluetooth indicator turns off.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Dock and  
charge Android-  
powered phone  
Charge through Micro USB  
connector  
3 Rotate the wheel to adjust the height of  
micro USB connector.  
Dock your Android device to the Micro USB  
connector for charging.  
1 Check the orientation of the micro USB  
socket on your Android device.  
4 Slide the connector to place your Android  
If necessary, rotate the USB connector  
on the docking system.  
device on the dock stably.  
2 Connect your Android device to the micro  
» When the docking system is  
connected to the power, your docked  
device starts charging automatically.  
USB connector.  
Charge through USB socket  
Connect a USB cable to AS170 and your  
Android device for charging.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1 Connect a USB cable (not supplied) to:  
the USB socket on the back of AS170.  
the USB socket on your device.  
2 Connect AS170 to power.  
» Once the device is recognized, the  
charging starts.  
Note  
The USB socket is used for charging only.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» The docking system stores all the available  
FM radio stations and broadcasts the first  
available station automatically.  
6 Listen to FM  
radio  
To store FM radio stations automatically  
afterwards,  
In FM mode, press and hold SOURCE/SET  
for two seconds.  
Tune to FM radio stations  
Store FM radio stations  
manually  
Tip  
Position the antenna as far as possible fromTV,VCR, or  
other radiation source.  
1 Tune to an FM radio station.  
For better reception, fully extend and adjust the  
position of the antenna.  
2 Press and hold SOURCE/SET for two  
seconds.  
» The preset number begins to blink.  
1 Press SOURCE/SET repeatedly to select  
FM preset/FM mode.  
3 Press -TUNE/TIME or TUNE/TIME +  
In FM preset mode:  
repeatedly to select a number.  
2 Press and hold -TUNE/TIME or TUNE/  
4 Press SOURCE/SET for two seconds again  
TIME + for two seconds.  
to confirm.  
» The docking system tunes to a station  
with strong reception automatically.  
5 Repeat steps 1 to 4 to store other stations.  
3 Repeat step 2 to tune to more radio  
stations.  
Note  
In FM mode:  
To tune to a radio station automatically,  
To remove a pre-stored station, store another station  
in its place.  
Press and hold -TUNE/TIME or  
TUNE/TIME + for two seconds.  
To tune to a radio station manually,  
Press -TUNE/TIME or TUNE/TIME  
+ repeatedly until you find optimal  
reception.  
Select a preset radio station  
In FM preset mode, press -TUNE/TIME or  
TUNE/TIME + repeatedly to select a preset  
number.  
Store FM radio stations  
automatically  
Note  
You can store a maximum of 20 FM radio stations.  
In FM preset mode:  
The first time you turn to FM preset mode,  
press an hold SOURCE/SET for two seconds.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
7 Play through  
audio cable  
Through an MP3 link cable, you can also play on  
AS170 from an external audio device, such as  
an MP3 player.  
AUDIO IN  
1 Connect an audio input cable with a 3.5  
mm connector on both ends between  
the AUDIO IN socket on this docking  
system, and  
the headphone socket of an external  
device.  
2 Press SOURCE/SET to select AUDIO IN  
mode.  
3 Play audio on the external device (refer to  
its user manual).  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
» The alarm repeats ringing for the next  
8 Other features  
day.  
Snooze alarm  
When alarm sounds, press SNOOZE.  
» The alarm snoozes and repeats ringing  
nine minutes later.  
Set alarm timer  
Note  
Make sure that you have set the clock correctly.  
Set sleep timer  
1 Press and hold AL1/AL2 for 2 seconds to  
activate alarm setting.  
This docking system can switch to standby  
mode automatically after a preset period.  
Press SLEEP repeatedly to select the sleep  
timer period (in minutes).  
» The hour digits blink.  
2 Press -TUNE/TIME or TUNE/TIME+  
repeatedly to adjust hour.  
» When the sleep timer is activated,  
appears.  
3 Press SOURCE/SET to confirm.  
» The minute digits blink.  
To deactivate the sleep timer  
Press SLEEP repeatedly until [OFF] (off)  
appears.  
4 Repeat steps 2-3 to set the minute.  
5 Repeat steps 2-3 to select an alarm source.  
TUNE: select your last listened FM  
15  
30  
60  
OFF  
90  
120  
channel as alarm sound.  
BUZ: select buzzer as alarm sound.  
Adjust display brightness  
Press BRIGHTNESS repeatedly to select  
different brightness levels.  
6 Repeat steps 2-3 to set the alarm volume.  
» The alarm time and icon are displayed.  
Activate/deactivate alarm timer  
1 Press AL1/AL2 to view alarm settings.  
2 Press AL1/AL2 again to activate or  
deactivate the alarm timer.  
» The alarm icon appears if alarm timer  
is on and disappears if it is off.  
To stop the ringing alarm, press the  
corresponding AL1/AL2.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Supported profiles  
Range  
A2DP 1.0/AVRCP 1.0  
10 m (Free space)  
9 Product  
information  
Tuner (FM)  
Note  
Tuning Range  
87.5 - 108  
MHz  
Product information is subject to change without prior  
notice.  
Sensitivity  
< 22 dBf  
- Mono, 26dB S/N Ratio  
Search Selectivity  
Total Harmonic Distortion  
Signal to Noise Ratio  
> 28 dBf  
< 3%  
> 50 dB  
General information  
AC Power  
Model:AS100-050-  
AE200  
Input: 100-240V ~,  
50/60 Hz, 0.5 A  
Output: 5V  
2.0 A  
Amplifier  
Rated Output Power  
2 X 2.5W RMS  
Operation Power  
Consumption  
Standby Power  
Consumption  
Max. load of Android  
output  
< 15 W  
< 1 W  
Speakers  
5V 1 A  
Speaker impedance  
Speaker driver  
4 Ohm  
1.5'' full range  
Max. load of USB output 5V 1.6 A  
Dimensions  
- Main Unit (W x H  
x D)  
137 x 98 x 141 mm  
Weight  
1.0 kg  
- With Packing  
- Main Unit  
0.56 kg  
Note  
Maximum current is 1.6 A when the Micro USB  
connector and USB socket are used for charging  
simultaneously or separately.  
Bluetooth  
Bluetooth specification V3.0 + EDR  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
10 Troubleshooting  
Warning  
Cannot connect with the system.  
The device does not support the profiles  
required for the system.  
Never remove the casing of this device.  
The Bluetooth function of the device is not  
enabled. Refer to the user manual of the  
device for how to enable the function.  
The system is not in the pairing mode.  
The system is already connected with  
another Bluetooth-enabled device.  
Disconnect that device or all other  
connected devices and then try again.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact Philips,  
make sure that the device is nearby and the  
model number and serial number are available.  
The paired device connects and disconnects  
constantly.  
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
General  
No power  
For some devices, the Bluetooth  
connection may be deactivated  
automatically as a power-saving feature.  
This does not indicate any malfunction of  
the system.  
Ensure that the AC power plug of the unit  
is connected properly.  
Ensure that there is power at the AC  
outlet.  
No sound or poor sound  
Adjust the volume of your docking speaker  
and Bluetooth device.  
Make sure that the Bluetooth connection  
is valid between your Bluetooth device and  
the docking speaker.  
Clock setting erased  
Power has been interrupted or the power  
adapter has been disconnected.  
Reset the clock.  
About Bluetooth device  
Music playback is unavailable on the system  
even after successful Bluetooth connection.  
The device cannot be used with the  
system to play music.  
The audio quality is poor after connection  
with a Bluetooth-enabled device.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products.The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
11 Notice  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Compliance  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Hereby, Philips Consumer Lifestyle, declares that  
this speaker is in compliance with the essential  
requirements and other relevant provisions of  
Directive 1999/5/EC.  
A copy of the EC declaration of Conformity  
is available in the Portable Document Format  
(PDF) version of the user manual at www.  
philips.com/support.  
Trademark notice  
The Bluetooth® word mark and logos are  
registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by Philips is  
under license.  
Copyright  
Recycling  
2013 © Koninklijke Philips Electronics N.V.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications are subject to change without notice  
© 2013 Koninklijke Philips Electronics N.V.  
All rights reserved.  
AS170_UM_12_V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Speaker QW 118 User Manual
Peavey Stereo Amplifier SSE 12 User Manual
Pelco Camera Lens C748M B User Manual
Philips Camera Accessories SCE4430 User Manual
Philips Cassette Player AQ 4420 User Manual
Philips Network Router SWR1221 User Manual
Philips Universal Remote RU 600 User Manual
Polk Audio Speaker AMR70 User Manual
Poulan Lawn Mower 190785 User Manual
Powercom Power Supply 325A User Manual