Philips Home Theater System MX6000I 37 User Manual

Wireless Home Entertainment System  
MX6000i  
Need help? Call us!  
Return  
Philips representatives are ready to help you with any  
questions about your new product.We can guide you  
through Connections, First-time Setup, or any of the Features.  
We want you to start enjoying your new product right away!  
yourWarranty  
Registration Card  
within 10 days  
Y
CALL US BEFORE YOU CONSIDER  
RETURNING THE PRODUCT!  
1-800-531-0039  
or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
11.Only use attachments/accessories specified by the  
manufacturer.  
12.  
Use only with the cart, stand, tripod,  
bracket, or table specified by the manufacturer  
or sold with the apparatus.When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
13.Unplug this apparatus during lightning storms or when  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer´s instructions.  
unused for long periods of time.  
14.Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
9. Do not defeat the safety  
purpose of the polarized or  
grounding-type plug.A polarized plug  
has two blades with one wider than  
15. Battery usage CAUTION To prevent battery  
leakage which may result in bodily injury, property damage,  
or damage to the unit:  
AC Polarized  
Plug  
the other.A grounding type plug has two blades and a third  
grounding prong.The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
G
G
Install all batteries correctly, + and - as marked on the unit.  
Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
10.Protect the power cord from being walked on or  
pinched, particularly at plugs, convenience receptacles, and  
the point where they exit from the apparatus.  
G
Remove batteries when the unit is not used for a long time.  
16. Apparatus shall not be exposed to dripping or  
splashing.  
17. Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted candles).  
18. This product may contain lead and mercury. Disposal of  
these material may be regulated due to environment  
considerations. For disposal or recycling information,  
please contact your local authorities or the  
EL 6475-E005: 04/01  
Class II equipment symbol  
This symbol indicates that the unit has a double  
insulation system.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canada  
English:  
This digital apparatus does not exceed the Class B limits  
for radio noise emissions from digital apparatus as set  
out in the Radio Interference Regulations of the  
Canadian Department of Communications.  
Français:  
Cet appareil numérique n'émet pas de bruits  
radioélectriques dépassant les limites applicables aux  
appareils numériques de Classe B prescrites dans le  
Règlement sur le Brouillage Radioélectrique édicté par  
le Ministère des Communications du Canada.  
CAUTION  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
The unit complies with the FCC-Rules, Part 15 and  
with 21 CFR 1040.10. Operation is subject to the  
following two conditions:  
1.This device may not cause harmful interference,  
and  
2.This device must accept any interference  
received, including interference that may cause  
undesired operation.  
TestedTo Comply  
With FCC Standards  
FOR HOME OR OFFICE USE  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules.These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation.This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or  
more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and the  
receiver.  
– Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
– Consult the dealer or an experienced radio/TV  
technician for help.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Important safety instructions ––––––––––––––––– 3  
Using ComponentVideo (PR PB Y) –––––––––––––– 14  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Troubleshooting ––––––––––––––––––––––––– 46–48  
Technical data –––––––––––––––––––––––––––––– 49  
Warranty –––––––––––––––––––––––––––––––––– 50  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
General information  
Supplied accessories  
Your Streamium DVD System is delivered with:  
– 2 front, 1 center and 2 rear speakers  
– 2 subwoofers built into the speaker stands  
– 7 speaker cables  
Maintenance  
Clean the unit with a soft, slightly  
dampened, lint-free cloth. Do not  
use any cleaning agents as they may  
have a corrosive effect.  
– 1 RCA-style audio cable (white and red plugs)  
– 1 CompositeVideo (CVBS) cable (yellow)  
– 1 ComponentVideo cable (red/blue/green)  
– 1 FM antenna  
Do not expose the unit, batteries  
or discs to humidity, rain, sand or  
excessive heat (caused by heating  
equipment or direct sunlight).  
– 1 AM loop antenna  
– 1 AC power cable  
– 1 Category 5 Ethernet cable  
– 1 remote control  
Always keep the trays of your unit  
closed to protect the lens from  
dust. Do not use any commonly  
available lens cleaning discs, as they  
may damage the optical lens of the unit.  
– 2 batteries type AA  
Setup  
The lens may cloud over when the unit is moved from cold  
to warm surroundings. Playing a disc is not possible then.  
Leave the unit in a warm environment until the moisture  
evaporates.  
Place the unit on a flat, hard, and stable surface. Do not  
place the unit on a carpet.  
Do not position the unit on top of other equipment that  
might heat it up (e.g. receiver or amplifier).  
Disc handling  
Do not put anything under the unit (e . g. CDs, magazines).  
To take a disc out of its box easily,  
press the center spindle while lifting  
it.Always hold a disc by the edge  
and put it back in its box after use.  
Allow at least 10 cm clearance from the rear and top of the  
unit and 5 cm from the left and right to prevent overheating.  
5 cm  
Never attach a sticker to a disc. If  
you want to label a disc, use a soft,  
felt-tipped pen and write only on  
the printed side.  
10 cm  
10 cm  
To clean a disc, wipe it in a straight  
line from the center toward the  
edge using a soft, lint-free cloth.  
Any cleaning agents may damage  
the disc!  
5 cm  
Environmental information  
All redundant packing material has been omitted.We have  
tried to make the packaging easy to separate into three  
single materials: cardboard (box), polystyrene foam (buffer)  
and polyethylene (bags, protective foam sheet).  
Do not block the ventilation openings.  
Do not expose the unit to dripping or splashing.  
Do not place any sources of danger (e. g. liquid filled  
objects, lighted candles) on the unit.  
Your unit consists of materials which can be recycled if  
disassembled by a specialized company. Please observe the  
local regulations regarding the disposal of packing materials,  
dead batteries and old equipment.  
Active mobile phones near the unit may cause  
malfunctions.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote control  
Inserting the batteries  
1
DVD  
INTERNET PC LINK TUNER  
2
3
AUX  
TV  
1 Open the battery compartment of the remote control.  
2 Insert two alkaline batteries, type AA (R06, UM-3),  
(UN) MARK  
FAVORITES  
ANGLE ZOOM  
VIEW  
according to the + and – indications.  
4
5
SUBTITLE  
AUDIO  
§
3 Close the battery compartment.  
Do not combine old and new or different types of  
batteries.  
SYSTEM  
DISC  
MENU  
6
£
7
8
9
Remove batteries if they are discharged or if the remote  
control will not be used for a long time.  
Batteries contain chemical substances, so they should  
be disposed of properly.  
¡
RETURN  
RESUME  
0
!
Using the remote control  
-
DEF  
MNO  
WXYZ  
ABC  
JKL  
TUV  
.@  
1 Aim the remote control directly at the remote sensor of  
GHI  
the Streamium System.  
@
PQRS  
SOUND  
2 Select the source you wish to control by pressing one of  
the source buttons on the remote control, e. g.TV,TUNER.  
SURROUND  
#
)
(
*
&
3 Next, select the desired function, e. g. 2OK.  
SHUFFLE  
REPEAT  
RECENT  
USER  
INFO !  
MUTE  
$
%
^
Using the remote control to  
control a PhilipsTV  
WhenTV is selected, the remote control will control some  
functions on your PhilipsTV, e. g.  
– 0–9 select aTV channel.  
– SYSTEM MENU switches the system menu of theTV  
on/off.  
1, 2, 3, 4 navigate in the system menu.  
S, T select the previous/nextTV channel.  
9 exits the system menu of theTV.  
– MUTE mutes the sound on theTV.  
– INFO! switchesTV text on/off.  
To control theTV, aim the remote control directly at theTV.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote control  
1 2  
@ 0–9 to enter numbers 0–9 and characters  
switches the unit to standby (off).To activate the unit, press  
any source button.  
(to enter a number with two or more digits, press 0–9  
repeatedly within 2 seconds)  
2 source buttons  
# SURROUND  
INTERNET connects to the Internet  
PC LINK connects to the PC  
selects the different sound settings: multi-channel surround,  
Hall or stereo mode.  
DVD selects discs 1–5. Press repeatedly.  
TV plays theTV sound on the Streamium System.  
TUNER selects FM or AM radio. Press repeatedly.  
AUX selects AUX DIGITAL or AUX ANALOG. Press  
repeatedly.  
$ RECENT  
INTERNET, PC LINK: displays the last 20 items played  
% USER  
selects an active user  
3
4
VIEW FAVORITES  
INTERNET,TUNER: shows your favorite Internet media  
services and radio stations  
^ MUTE  
switches the speakers’ sound off or on again.  
TV: switches the sound on theTV off/on.  
(UN)MARK FAVORITES  
& INFO!  
INTERNET,TUNER: marks and unmarks favorites  
INTERNET, PC LINK: requests on-line information about  
currently playing item through e-mail (if available).  
5 AUDIO (blue button)  
DVD: selects an audio channel (e. g. a different language)  
during playback of a DVD or (Super)Video CD  
INTERNET, PC LINK: multifunction button  
* REPEAT  
selects the different repeat modes (depending on the  
media type); switches repeat mode off.  
6 VOL+,  
( SHUFFLE  
adjust the volume  
plays tracks in random order  
7 DISC MENU  
) SOUND  
enters and exits the disc menu (DVD)  
selects a different sound setting for bass, treble, loudness  
and clearvoice.  
8 1 2 3 4  
moves the cursor left, right, up or down in the menus  
TUNER: 3, 4 selects favorite radio stations,  
1, 2 tunes to a radio station, press for 1 second to auto  
search for a radio station.  
¡ 9  
stops playback.  
RETURN  
returns to the previous menu.  
9 T  
£ 2OK  
DVD: skips to the beginning of the next chapter/title/track  
of a disc; searches forward if pressed longer than 2 seconds.  
Press again for various search speeds.  
TV: selects a higher channel.  
starts playback, resumes playback, or confirms a selection.  
SYSTEM MENU  
DVD, INTERNET, PC LINK,AUX: enters the system menu.  
0 S  
ZOOM (yellow button)  
DVD: skips to the beginning of the current or previous  
chapter/title/track of a disc; searches backward if pressed  
longer than 2 seconds. Press again for various search  
speeds.  
shows a close up view of a particular portion of the picture  
on theTV screen,  
INTERNET, PC LINK: multifunction button  
§ SUBTITLE (red button)  
TV: selects a lower channel.  
switches on or off the subtitles of a DVD during playback  
INTERNET, PC LINK: multifunction button  
! ;  
pauses playback  
ANGLE (green button)  
selects the camera angle (if available) of a DVD during  
playback  
INTERNET, PC LINK: multifunction button  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
^
%
$
#
@
!
0
9
1
2
3
4
5
6
7
8
1 STANDBY-ON  
9 VOLUME  
adjusts the volume  
switches the unit on or to standby (off)  
2 IR sensor for the remote control  
0 ;  
pauses playback  
! 2OK  
starts playback, resumes playback, or confirms a selection  
@ SOURCE  
3 INTERNET, PC LINK: multifunction button (same function  
as red button on the remote control)  
4 display  
5 INTERNET, PC LINK: multifunction button (same function  
selects a source (DISC 1–5,TV,TUNER,AUX DIGITAL,  
AUX ANALOG, INTERNET, PC LINK)  
as green button on the remote control)  
6 1 2 3 4  
#
moves left, right, up or down in the menus,  
selects favorite radio stations  
INTERNET,TUNER: shows your favorite Internet media  
services and radio stations  
7 9  
$ (same function as RECENT on the remote control)  
stops playback  
INTERNET, PC LINK: displays the last 20 items played  
8 p  
% disc trays 1–5  
6.3 mm headphones jack  
^ DISC 1–5, OPEN·CLOSE /  
opens/closes disc trays 1–5  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connections  
% $ #  
@
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
ANTENNA  
AM  
DIGITAL  
OUT  
FM  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
P-SCAN  
DIGITAL  
IN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S - VIDEO  
VIDEO OUT  
ON  
OFF  
COMPONENT  
1
2
3 4 5 6 7 8 9  
0 !  
1 FRONT LEFT, FRONT RIGHT, CENTRE,  
SURR LEFT, SURR RIGHT  
7 VIDEO OUT/S-VIDEO  
connect to S-Video input of theTV  
FRONT LEFT: connect the front left speaker  
FRONT RIGHT: connect the front right speaker  
CENTRE: connect the center speaker  
8 COMPONENT PR, PB,Y  
connect to the corresponding Component video inputs of  
theTV  
SURR LEFT: connect the surround left speaker  
SURR RIGHT: connect the surround right speaker  
9 P-SCAN  
to switch on or off progressive scan  
2 SUB-W LEFT, SUB-W RIGHT  
connect the left and right subwoofers  
0 ANTENNA / AM  
connect the AM loop antenna  
3 AUX IN L, R  
connect to the left and right analog audio output jacks of  
external equipment (e. g. tape deck,VCR, …)  
! ANTENNA / FM  
connect the FM antenna cable  
4 TV IN L, R  
@ MAINS ~  
connect to the left and right AUDIO OUT jacks of theTV  
After all other connections have been made, connect  
the power cable to the power outlet.  
5 LINE OUT L, R  
connect to the left and right analog audio input jacks of an  
external equipment (e. g. tape deck, …)  
# ETHERNET  
connect to router, broadband Internet, or PC  
6 VIDEO OUT/CVBS  
$ DIGITAL OUT  
connect to the CompositeVideo input of theTV  
connect to the digital coaxial input of digital equipment  
% DIGITAL IN  
connect to the digital coaxial output of digital equipment  
Before starting with the connections, make sure  
all equipment you want to connect – as well as the  
Streamium System – are disconnected from the  
power outlets.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting …  
Before you make connections, make sure the unit is  
not connected to the power supply.  
Attaching the rear speakers to the wall  
Assembling of the speakers  
You can use the subwoofers as speaker stands for the front  
or for the rear speakers.The following text describes the  
setup of the subwoofers in the front.  
Attaching the front speakers to the subwoofers  
white (red) purple  
1 Attach the supplied bracket firmly to the rear of the rear  
speaker using the supplied screws.  
2 Hook the speaker carefully onto a screw in the wall, using  
the hole in the bracket.  
Positioning of the speakers and  
the subwoofers  
1 Connect the speaker cables to the connectors on the  
bottom of the subwoofers before attaching the front  
speakers.  
centre  
2 Put the front speakers on top of the subwoofers and press  
them down gently until you hear a “click.”  
The front speakers are now connected to the  
subwoofers.  
front L,  
subwoofer  
front R,  
subwoofer  
3 Next, attach the rear speakers to the wall or use the  
supplied mini speaker stands.  
Attaching the mini speaker stands to the rear  
speakers  
rear L  
rear R  
1 Place the subwoofers with the front speakers at an equal  
distance to yourTV.The distance between your listening  
position and the left and right front speakers should be  
approximately equal to the distance between the left and  
right front speakers.  
2 Place the center speaker on top of theTV.  
3 Place the left and right rear speakers to the left and right  
of your preferred listening position.  
Notes:  
Keep the speakers away from the room´s corners.  
Position the speakers at ear level.  
Leave enough space between the left and right front  
speakers and theTV to avoid magnetic interference.  
G
Attach a supplied speaker stand firmly to the bottom of  
each rear speaker using the supplied screws.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting …  
Connecting the speakers and the  
subwoofers  
Connecting the tuner antennas  
We recommend connecting all speakers. At least the  
front speakers (left and right) and the subwoofers  
must be connected. If you do not connect all speakers,  
press SURROUND repeatedly to select STEREO after  
switching on the Streamium System.  
When connecting the speakers make sure the colors  
of the speaker cables correspond with the colors of the  
connectors.  
ETHERNET  
CVBS  
ANTENNA  
1 Insert the supplied speaker cables into the click-fit  
L
AM  
FM  
connectors on the speakers.  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
ON  
COMPONENT  
OFF  
VIDEO OUT  
2 Then connect the speaker cables to the corresponding  
click-fit connectors on the rear of the unit so that the  
colors of the speaker connectors and the speaker cables  
match.  
Connecting the FM antenna  
1 Connect the supplied FM antenna cable to the  
FM ANTENNA jack on the rear of the unit.  
+
Speaker  
Front Left  
Front Right  
Center  
Surround Left  
Surround Right  
Subwoofer Left  
Subwoofer Right  
white  
red  
green  
blue  
grey  
purple  
purple  
black  
black  
black  
black  
black  
black  
black  
2 Extend the antenna cable and put it in a position where the  
reception is best.  
Connecting the AM antenna  
1 Assemble the supplied AM loop antenna as shown above.  
2 Connect the antenna to the AM ANTENNA jack on the  
rear of the unit.  
3 Place the antenna on a shelf or mount it on the wall in a  
How to use the click fit connectors  
1 Press down the clip and fully insert the stripped portion of  
the speaker cable into the socket.  
position where the reception is best.  
2 Release the clip again.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting …  
Connecting theTV  
Using CompositeVideo (CVBS)  
After connecting the speakers, choose one of several kinds  
of video connections, which differ in quality. For the  
availability of the necessary connectors on yourTV, please  
read the user´s manual of yourTV.  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
AUDIO  
Pr/Cr  
OUT  
Pb/Cb  
Y
VIDEO IN  
COMPONENT  
V
I
D
E
O
I
N
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
V
I
D
E
O
I
N
Y
You only need one video connection between the  
TV and the Streamium System (Component Video,  
S-Video, or Composite Video).  
S-Video or ComponentVideo provides better picture  
quality than CompositeVideo.To use these connections,  
these options must be available on yourTV.  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
DIGITAL  
OUT  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
Connect the Streamium System directly to theTV.  
DIGITAL  
IN  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
VIDEO OUT  
ON  
COMPONENT  
OFF  
Using ComponentVideo (PR PBY)  
COMPONENT  
VIDEO IN  
1 Use the composite video cable (yellow) to connect the  
Streamium System’s CVBS jack to the video input jack (or  
labelled as A/V In,Video In, Composite) on theTV.  
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
VIDEO IN  
COMPONENT  
Y
V
I
D
E
O
I
N
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
V
I
D
E
O
I
N
Y
2 To hear the sound of theTV through this Streamium  
System, use the audio cable (white/red) to connectTV IN  
(L/R) on the Streamium System to the corresponding  
AUDIO OUT jacks on theTV.  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
3 Set the P-SCAN switch to OFF.  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
DIGITAL  
OUT  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
Using S-Video  
DIGITAL  
IN  
P-SCAN  
R
Y
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
VIDEO OUT  
ON  
COMPONENT  
OFF  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
VIDEO IN  
1 Use the component video cables (red/blue/green) to  
connect the Streamium System’s COMPONENT PR PB Y  
jacks to the corresponding ComponentVideo Input jacks  
(or labelled as Pr/Cr Pb/CbY orYUV) on theTV.  
COMPONENT  
Y
V
I
D
E
O
I
N
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
V
I
D
E
O
I
N
Y
2 To hear the sound of theTV through this Streamium System,  
use the audio cables (white/red) to connectTV IN (L/R)  
jacks to the corresponding AUDIO OUT jacks on theTV.  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
DIGITAL  
OUT  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
3 If you are using a Progressive ScanTV (TV must indicate  
Progressive Scan or ProScan capability,) set the P-SCAN  
switch (at the rear of the Streamium System) to ON.  
Otherwise, set it to OFF.  
DIGITAL  
IN  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
VIDEO OUT  
ON  
COMPONENT  
OFF  
Notes:  
1 Use an S-Video cable (not supplied) to connect the  
Streamium System’s S-VIDEO jack to the S-Video input jack  
(or labelled asY/C or S-VHS) on theTV.  
To set Video Output to ‘Y PB PR’, change the setting manually  
in the System Menu. See chapter “No picture or distorted  
picture.”  
The progressive scan video quality is only possible through  
the COMPONENT PR PBY output.  
2 To hear the sound of theTV through this Streamium  
System, use the audio cable (white/red) to connectTV IN  
(L/R) on the Streamium System to the corresponding  
AUDIO OUT jacks on theTV.  
3 Set the P-SCAN switch to OFF.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting …  
Connecting audio equipment  
Connection for digital or analog recordings  
Connections for playback  
To play the sound of additional audio equipment on the  
Streamium System, one digital and one analog connection  
are available.  
~
AC  
M
OUT  
IN  
OUT  
IN  
ANALOG  
DIGITAL  
ANALOG  
OUT  
IN  
Tape deck  
digital  
or  
analog  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
DIGITAL  
OUT  
LEFT  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
DIGITAL  
IN  
P-SCAN  
R
OUT  
IN  
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
ON  
COMPONENT  
OFF  
CD recorder  
VIDEO OUT  
OUT  
IN  
ANALOG  
DIGITAL  
G
To record the sound from the Streamium System to a  
digital system, connect a digital RCA-style cable to  
DIGITAL OUT on the Streamium System and to the  
DIGITAL IN jack of the digital equipment.  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
0
When digital recording is not permissible, record the analog  
sound from the Streamium System. Use the audio cable  
(white/red) to connect LINE OUT (L/R) on the Streamium  
System to the corresponding AUDIO IN (L/R) jacks on the  
digital equipment.  
DIGITAL  
OUT  
L
SURR  
RIGHT  
SUB-W  
RIGHT  
DIGITAL  
IN  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
ON  
COMPONENT  
OFF  
VIDEO OUT  
1 Connect a digital RCA-style cable to the DIGITAL IN of the  
Streamium System and to the digital output jack of the  
digital equipment.  
0
Refer to the Instruction Manual of the digital equipment on  
recording.  
Recording is permissible insofar as copyright or other  
rights of third parties are not infringed upon.  
2 Connect an RCA-style audio cable to AUX IN (L/R) on the  
Streamium System and to the left and right analog output  
jacks of your tape deck, CD player, or similar.  
When playing an MP3-CD on the Streamium System,  
no signal will be available using DIGITAL OUT.  
Notes:  
To use these connections, press AUX on the remote control  
repeatedly (or rotate SOURCE on the Streamium System) to  
select AUX DIGITAL or AUX ANALOG.  
This product incorporates Macrovision copyright protection  
technology that is protected by US patent no. 4631603,  
4577216 and 4819098, as well as other intellectual  
property rights. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is only  
intended for home use and other pay-per-view applications.  
Macrovision must provide written authorization for any  
other use. Change to the device, reverse engineering or  
disassembly is prohibited.  
You cannot connect a turntable to AUX IN.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting …  
Connecting to power supply  
Switching on the system  
DVD  
INTERNET PC LINK TUNER  
ANTENNA  
AM  
AUX  
TV  
FM  
(UN) MARK  
FAVORITES  
ANGLE ZOOM  
VIEW  
SUBTITLE  
AUDIO  
SYSTEM  
MENU  
DISC  
MENU  
The type plate is located on the rear of the unit.  
G
Press STANDBY-ON on the Streamium System or one of  
the source buttons on the remote control (DVD,TV,  
TUNER,AUX, INTERNET, PC LINK) to switch on the  
Streamium System.  
1 Check whether the power voltage as shown on the type  
plate corresponds to your local power voltage. If it does  
not, consult your dealer or service organization.  
2 Make sure yourTV is switched off before connecting the  
Selecting a source  
Turn SOURCE on the Streamium System or press DVD,  
INTERNET, PC LINK,TUNER,TV or AUX on the remote  
control to select a source.  
Streamium System to the power supply for the first time.  
G
3 Make sure all connections have been made before  
switching on the power supply.  
The selected source will be displayed.  
4 Connect the supplied power cable to MAINS ~ at the rear  
of the Streamium System and to the power outlet.  
On the remote control:  
To select disc 1, 2, … 5, press DVD repeatedly.  
To select equipment connected to AUX IN or  
DIGITAL IN on the Streamium System, press AUX  
repeatedly.  
When the unit is switched to standby (off), it is still  
consuming some power.To disconnect the unit from the  
power completely, remove the power plug from the  
wall outlet.  
To avoid overheating of the unit, a safety circuit has  
been built in.Therefore your unit may disconnect  
under extreme conditions. If this happens, unplug the  
unit and let it cool down before reusing it.  
Switching to Eco Power standby  
Press STANDBY-ON on the Streamium System or 2 on  
the remote control.  
The STANDBY-ON button will light up on the system.  
The display screen will go blank.  
G
Note:The Streamium System will switch to Standby  
automatically after 20 minutes of no activities, if “Sleep timer”  
is switched on in the System Menu and if DVD or INTERNET is  
selected.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings for theTV  
The following settings optimize the connection between  
the Streamium System and theTV.  
TV Shape  
You may set the Streamium System to display a DVD movie  
in one of three formats: Letterbox, Panscan, or Widescreen.  
TheTV Shape you select must be supported by the movie.  
If not, theTV Shape settings will not affect the picture.  
Check if you see a picture  
1 Switch on yourTV.  
1 Press SYSTEM MENU on the remote control.  
2 Press AUX on the remote control.  
3 Next, press SYSTEM MENU on the remote control.  
2 DVD: Use 1, 2, 3 or 4 to select Setup TV ➜  
TV Shape.  
4 If necessary set theTV to the correct audio/video channel  
for the Streamium System. Such channels may be called  
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,  
EXT2 or EXTERNAL IN, etc.These channels are often near  
channel 00. If you are using an RF modulator, select the  
channel for the RF modulator.  
INTERNET, PC LINK,AUX: Use 1, 2, 3 or 4 to select  
Picture TV Settings TV Shape.  
DVD  
Stop  
View  
TV  
Program  
Setup  
TV shape  
The system menu of the Streamium System should  
appear on theTV.  
4:3 Panscan  
TV shape  
4:3 Letterbox  
Widescreen  
No picture or distorted picture  
The Streamium System may be set to the wrong video  
signal. Observe the display on the Streamium System.  
Video output  
1 If necessary, press AUX on the remote control. Next, press  
SYSTEM MENU.  
2 Press 4 repeatedly to select PICTURE. Next press 2.  
3 Press 2 to enter the menu and 4 to select  
4:3 Letterbox if you have a  
regularTV and the picture will have  
black bars at the top and bottom  
of the screen,  
3 Press 4 repeatedly to select TV SETTINGS. Next, press 2.  
4 Press 4 repeatedly to select VIDEO OUTPUT.  
Next, press 2.  
5 Press 4 or 3 repeatedly to select  
Y PB PR (COMPONENT VIDEO)if you have connected  
theTV to COMPONENT PR PB Y on the Streamium  
System,  
4:3 Panscan if you have a  
regularTV and both sides of  
the picture will be trimmed  
to fit yourTV screen,  
CVBSif you have connected theTV to CVBS or S-Video  
on the Streamium System.  
Widescreen if you have a  
6 Press 2OK to confirm the setting.  
widescreenTV.  
7 Next, press SYSTEM MENU to exit the system menu.  
Note: Some widescreenTVs may show only part of the System  
Menu.This is not an error of the Streamium System settings.  
Adjust the screen mode on yourTV. See yourTV owner’s manual  
for details.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the System Menu  
INTERNET PC LINK TUNER  
AUX  
TV  
(UN) MARK  
FAVORITES  
ANGLE ZOOM  
VIEW  
SUBTITLE  
AUDIO  
SYSTEM  
MENU  
DISC  
MENU  
RETURN  
RESUME  
-
DEF  
MNO  
WXYZ  
ABC  
JKL  
TUV  
GHI  
PQRS  
The System Menu allows you to operate features available  
in this Streamium System.  
Please be aware that the System Menu and the available  
features in the menu depend on the selected source. Even  
though the System Menus of DVD and INTERNET/PC LINK  
look different, many features (e. g. color settings, parental  
control, etc.) are available in both menus and work similarly.  
Most of the illustrations in this manual show the System  
menu when DVD is selected.  
1 Press SYSTEM MENU on the remote control to enter the  
System menu.  
2 Press 1, 2, 3, 4 on the remote control to navigate in the  
menu, to select a feature or to change the setting of a  
feature.  
3 Press 2OK to confirm a setting.  
0
To exit the System Menu press SYSTEM MENU.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Volume and sound  
SYSTEM  
MENU  
DISC  
MENU  
Adjusting the Surround Sound  
To have optimum surround sound ensure that all the  
speakers and subwoofers are connected properly.  
The available multi-channel sounds include: DTS (Digital  
Theater Systems) Surround, Dolby Digital, Dolby Surround  
and Dolby Pro Logic 2.  
RETURN  
RESUME  
A sursound sound effect will only be available if it is  
supported by the disc, the media file, or the media service  
you are playing.  
-
DEF  
MNO  
ABC  
JKL  
TUV  
.@  
GHI  
PQRS  
SOUND  
WXYZ  
The number of speakers that play a sound depends on  
the selected surround sound and the sound available on  
the disc (e .g. when Stereo is selected, only the front left  
and right speakers and the subwoofers will operate).  
SURROUND  
SHUFFLE  
REPEAT  
RECENT  
USER  
INFO !  
MUTE  
G
Press SURROUND on the remote control repeatedly to  
select STEREO, MULTI-CHANNEL (DTS and DOLBY) or HALL.  
The selected sound will be displayed.  
Notes:  
Adjusting theVolume  
TurnVOLUME on the Streamium System or pressVOL+ or  
VOL– on the remote control to adjust the volume.  
The volume setting will be displayed.  
You can also set the Surround sound in the System Menu.  
See “Analogue output.”  
If you have not connected all speakers, press SURROUND  
repeatedly to select STEREO.  
G
0
0
To switch off the sound, press MUTE on the remote  
control.  
To switch the sound on again, press MUTE again.  
Manufactured under license from Dolby  
Laboratories.Dolby”,Pro Logic”, and  
the double-D symbol are trademarks  
of Dolby Laboratories.  
Note:WhenTV is selected, MUTE will switch off the sound on  
your PhilipsTV.  
Adjusting Bass,Treble, Loudness  
and ClearVoice  
Manufactured under license from  
DigitalTheater Systems, Inc. US Pat. No.  
5,451,942, 5,956,674, 5,974,380, 5,978,762  
and other world-wide patents issued  
and pending.DTS” and “DTS Digital Surround” are  
registered trademarks of DigitalTheater Systems, Inc.  
Copyright 1996, 2000 DigitalTheater Systems, Inc.  
All Rights reserved.  
1 Press SOUND on the remote control repeatedly to select  
BASS, TREBLE, LOUDNESS or CLEARVOICE.  
2 Bass orTreble:Within 3 seconds, press 1, 2, 3 or 4 to  
adjust the level of bass/treble.  
Loudness or ClearVoice:Within 3 seconds, press 1, 2, 3 or  
4 to switch Loudness/ClearVoice on or off.  
3 Press 2OK on the remote control to confirm.  
Note: ClearVoice enhances the voices in surround sound signals  
to make dialogues easier to follow. ClearVoice is available for  
surround sounds only.  
Listening through Headphones  
G
Connect the headphones plug (6.3mm) to the headphones  
jack (;) on the Streamium System.  
The sound on all the speakers will be muted.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
General information on  
How to ensure a good wireless connection  
– Place your wireless router as close as possible to the  
center of the area you want to cover.  
INTERNET and PC LINK  
This Philips Streamium System is a wireless broadband  
Internet system. It is compliant with the IEEE 802.11g  
standard.The Streamium System can connect to your  
wireless or wired home network and play various Internet  
media services (e. g. Internet radio, video …) as well as  
media files (music, pictures …) stored on the PCs of your  
home network.  
– Keep the antenna(s) away from large metal objects to  
avoid interference.  
– Avoid placing the Streamium System close to microwave  
ovens.  
– Avoid placing this Streamium System directly under or  
above the wireless router.  
– Refer to the signal strength indication to locate the  
best position for the wireless router and the Streamium  
System.To display the signal strength indication,  
press SYSTEM MENU and select Network. Next,  
select Wireless Info Signal Level.  
The Streamium System is upgradable through your Internet  
connection. From time to time, new features will be  
available and the functionality of this Streamium System will  
change.Therefore, this manual offers only a rough overview  
of the Internet and PC link functionality.  
Please visit “My.Philips.com” for the latest information on  
available services and new functionality.  
Network name (SSID)  
The network name (SSID) identifies your computer in a  
wireless network. Please keep in mind that the network  
name is case sensitive.  
Requirements to use Internet media services  
– broadband Internet access (DSL, cable modem),  
– an email address.  
WEP encryption  
WEP encryption protects your wireless network against  
intrusion.WEP encryption uses up to 4 encryption keys to  
encrypt the data sent in your wireless network.  
If you use WEP encryption make sure  
– the number and the order of encryption keys on the  
Streamium System and on your wireless router/wireless  
network adapter are the same,  
– all encryption keys you enter have the same format  
(either ASCII or HEX format) and the same length  
(ASCII, either 5 or 13 characters; HEX, either 10 or 26  
digits).  
Please ask your Internet service provider  
– if you can connect several devices (computers and the  
Streamium System) to your Internet connection,  
– if he allows only devices with registered MAC addresses  
to connect to the Internet,  
– if he charges extra fees for exceeding a certain limit of  
transferred data.When you use Internet media services  
on a daily basis, you may exceed such a limit. For  
example:When you listen to Internet radio (transmitting  
at 64 kbit/sec) for about 36 hours, 1 GB (Gigabyte) of  
data will be transferred to your Streamium System.  
Note: Some wireless routers/wireless network adapters allow  
you to type in a passphrase instead of an encryption key. Do  
not use passphrases with the Streamium System, since  
passphrases are not supported.  
Requirements to use PC LINK  
– a computer with Windows® operating system  
(Windows 98 SE or higher) or Mac OS® X,  
– installation of the Philips Media Manager software on  
your computer.  
The following file formats stored on your computer are  
supported at the time of printing this manual (subject to  
change):  
– Music: MP3 and MP3pro streams; bit rates:  
32–320 kbit/sec, variable bit rate  
Windows is a registered trademark of Microsoft  
Corporation in the United States and other countries.  
– Pictures: JPEG, JPEG2000, .bmp, .gif  
– Video: MPEG 1, MPEG 2, MPEG 4, DivX® 4.0/5.03  
Mac OS is a registered trademark of Apple Computer,Inc.  
DivX® is a registered trademark of DivXNetworks, Inc.  
Please visit My.Philips.com for the latest information on  
supported operating systems and file formats.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
Before connecting  
A)Wireless home network with  
wireless router  
1 If you have a wired or a wireless home network and you  
have not set it up yet, consult the user´s manual of your  
(wireless) router on how to set up the network and how  
to connect to the Internet.  
Follow these instructions if you have  
– a wireless router and  
– broadband Internet access.  
2 Check if the computers in your network connect properly  
to the Internet and to each other. If you face any problems  
connecting to the Internet, consult your Internet service  
provider.  
broadband internet  
3 Install the Philips Media Manager software on the PCs of  
your network:  
Either download the latest version at “My.Philips.com” or  
install it from the supplied CD-ROM. Please refer to the  
installation guide of the Media Manager software for  
installing the software and making media files of your PCs  
available to the Streamium System.  
4 Switch on theTV and set theTV to the correct audio/video  
channel for the Streamium System. Such channels may be  
called AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN,  
EXT1, EXT2 or EXTERNAL IN, etc.These channels are  
often near channel 00.  
1 Press INTERNET on the remote control.  
The Streamium System tries to connect automatically to  
a wireless network.  
2 If the Streamium System connects to a wireless network, it  
will display its network name (SSID) briefly. Please verify  
that the displayed network name corresponds to the  
network you want to join. If you want to connect to  
another network, press SYSTEM MENU and select  
Network Settings Network Cong. to change the  
wireless network settings.  
Note: If you did not connect the Streamium System to aTV,  
observe the display on the Streamium System.  
5 Switch on the Streamium System.  
6 Depending on your home network, continue with one of  
the following 4 sections:  
– A) Wireless home network with a wireless router,  
– B) PC with a wireless network card or with a wireless  
USB adapter,  
After connecting to the Internet the Streamium System  
will ask you to enter your email address. Continue with  
“Registration.”  
– C) Wired home network with a router,  
– D) PC only with a network interface (Ethernet) card.  
If the Streamium System fails to connect, read the message  
on theTV screen and continue with one of the following  
paragraphs.  
Check the illustrations at the beginning of each section to  
find out which of the 4 cases describes your home network  
best.  
If Choose your wireless networkappears  
Several wireless networks or one encrypted network are  
available.  
1 Press 4 or 3 repeatedly to select the network you want to  
join.  
If the desired network does not appear, press the  
red button (SUBTITLE) on the remote control to select  
manual and continue with “If ‘Enter wireless network  
name (SSID)’ appears.”  
2 Press the green button (ANGLE) on the remote control to  
confirm the selected network.  
3 If the selected network is WEP encrypted, continue with  
“If the network is WEP encrypted.”  
If the Streamium System connects to the Internet, continue  
with “Registration.”  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
If Are you using a wireless (WiFi/802.11) or a  
wired (Ethernet) network connection?appears  
Press the red button (SUBTITLE) on the remote control to  
connect to a wireless network.  
If An IP address could not be obtained  
automatically.Would you like to enter your  
network settings manually?appears  
G
1 Press the red button (SUBTITLE) on the remote control to  
connect again to the Internet automatically.Always try this  
solution first. If necessary, repeat this step several times.  
If Enter wireless network name (SSID)appears  
1 Press the red button (SUBTITLE) on the remote control to  
search again for all available networks or, use the number  
buttons to enter the network name (SSID) of your wireless  
network.  
2 If the Streamium System connects to the Internet, continue  
with chapter “Registration.”  
If the Streamium System does not connect to the Internet,  
press the green button (ANGLE) on the remote control to  
enter the IP settings manually. Please contact your Internet  
service provider to get all the information you need below.  
The network name is case sensitive. Press the number  
buttons repeatedly to change from lower to upper case  
characters. On the display of the Streamium System case-  
sensitive characters are distinguished by size. For example,  
“Gg” will be shown as “GG.”  
Next, you will be asked to enter  
– the IP address for the Streamium System  
– the netmask: Make sure all computers in your network  
as well as the Streamium System have the same  
netmask. If you are not sure, try 255.255.255.0.  
– Default Gateway: the IP address of your router  
– two DNS.  
2 Press 2OK to confirm.  
Are you using an Access Point or Ad-Hoc  
network? appears.  
3 Press the red button (SUBTITLE) on the remote control to  
select Access Point.  
Are you usingWEP encryption on your wireless  
network? appears.  
Use the number buttons on the remote control to enter  
each setting and press 2OK to confirm each setting.  
4 If your network is not WEP encrypted, press the red button  
(SUBTITLE) on the remote control to connect to the  
Internet.  
If The system could not connect to the server.’  
appears  
Maybe the system does not connect to the Internet  
because your Internet service provider uses a proxy.You  
need to enter the proxy name and proxy port. Please  
contact your Internet service provider to get this  
information.  
If the network is WEP encrypted, press the green button  
(ANGLE) on the remote control.  
If the network isWEP encrypted  
You will be asked to enter up to 4 encryption keys. Check  
the setup menu of your wireless router to see which  
encryption keys are used.  
1 Press the green button (ANGLE) on the remote control if  
your Internet service provider uses a proxy.  
2 Use the number buttons to enter the proxy name. Next,  
1 Use the number buttons to enter the encryption key. Next,  
press 2OK.  
press 2OK to confirm.  
3 Use the number buttons to enter the proxy port. Next,  
press 2OK.  
2 Repeat step 1 for all encryption keys. If not all of the  
4 encryption keys are used in your network, enter “0”  
(zero) for no encryption key.  
The Streamium System tries to connect to the Internet.  
PC LINK connection  
If the Streamium System does not connect to the  
Internet  
The Streamium System may not connect to the Internet  
because  
G
After the Streamium System has connected successfully to  
the Internet, press PC LINK to connect to the PCs in your  
network.  
– a connection error has occurred. Press INTERNET again  
to reconnect.  
The Streamium System may not connect to the PC  
because  
– the wireless router is not connected to the Internet.  
Check if the computers in your network have access to  
the Internet.  
– a connection error has occurred. Press PC LINK again.  
– you have not yet installed the Philips Media Manager  
software on your PC.  
– the IP settings are not correct. Continue with “If ‘An IP  
address could not be obtained automatically.Would you  
like to enter your network settings manually?’ appears.”  
– your Internet service provider is using a proxy. Continue  
with “If ‘The system could not connect to the server.’  
appears.”  
– the PC is switched off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Internet and PC Link  
B)PC with a wireless network card  
2 Press the green button (ANGLE) on the remote control to  
confirm the selected network.  
or with a wireless USB adapter  
Follow these instructions  
– if you have no router and  
– if you have a PC with a wireless network card or with a  
wireless USB adapter.  
3 If the selected network is WEP encrypted, continue with  
“If the network is WEP encrypted.”  
If Are you using a wireless (WiFi/802.11) or a  
wired (Ethernet) network connection?appears  
Press the red button (SUBTITLE) on the remote control to  
connect to a wireless network.  
You will be able to access media files (e. g. MP3 files) stored  
on your PC.  
G
If Enter wireless network name (SSID)appears  
1 Press the red button (SUBTITLE) on the remote control to  
search again for all available networks or, use the number  
buttons to enter the network name (SSID) of your PC.  
wireless  
USB adapter  
The network name is case sensitive. Press the number  
buttons repeatedly to change from lower to upper case  
characters. On the display of the Streamium System case-  
sensitive characters are distinguished by size. For example,  
“Gg” will be shown as “GG.”  
2 Press 2OK to confirm.  
Are you using an Access Point or Ad-Hoc  
network? appears.  
1 Make sure the network settings of the wireless network  
card on your PC are set to “ad-hoc mode” (“peer-to-peer”  
or “computer-to-computer”).  
3 Press the green button (ANGLE) on the remote control to  
select Ad-Hoc network.  
2 If necessary, switch on your PC.  
Are you usingWEP encryption on your wireless  
network? appears.  
3 Press PC LINK on the remote control.  
The Streamium System tries to connect automatically to  
a wireless network.  
4 If your network is not WEP encrypted, press the red button  
(SUBTITLE) on the remote control to connect to your PC.  
4 If the Streamium System connects to a wireless network, it  
will display its network name (SSID) briefly. Please verify  
that the displayed network name corresponds to your  
PC. If it does not, press SYSTEM MENU and select  
Network Settings Network Cong. to change the  
wireless network settings.  
If the network is WEP encrypted, press the green button  
(ANGLE) on the remote control.  
If the network isWEP encrypted  
You will be asked to enter up to 4 encryption keys. For the  
encryption keys check the network settings of the wireless  
network card on your PC.  
If the Streamium System connects to the PC, the computer  
name of your PC will be displayed. Please keep in mind that  
“network name” (SSID) and “computer name” are not the  
same.  
1 Use the number buttons to enter the encryption key. Next,  
press 2OK to confirm.  
2 Repeat step 1 for all encryption keys. If not all of the  
4 encryption keys are used in your network, enter “0”  
(zero) for no encryption key.  
If the Streamium System fails to connect, read the message  
on theTV screen and continue with one of the following  
paragraphs.  
If the Streamium System does not connect to  
your PC  
The Streamium System may not connect to the PC  
because  
If Choose your wireless networkappears  
Several wireless networks or one encrypted network are  
available.  
– a connection error has occurred. Press PC LINK again.  
– you have not yet installed the Philips Media Manager  
software on your PC.  
1 Press 4 or 3 repeatedly to select the network name of  
your PC.  
If the network name of your PC does not appear, press  
the red button (SUBTITLE) on the remote control to select  
manual and continue with “If ‘Enter wireless network  
name (SSID)’ appears.”  
– the IP address of the Streamium System and that of your  
PC are not in the same subnet.  
– the PC is switched off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
C)Wired home network with a  
If An IP address could not be obtained  
automatically.Would you like to enter your  
network settings manually?appears  
router  
Follow these instructions if you have a home network with  
a router and broadband Internet access.  
1 Press the red button (SUBTITLE) on the remote control to  
connect again to the Internet automatically.Always try this  
solution first. If necessary, repeat this step several times.  
broadband internet  
router  
2 If the Streamium System connects to the Internet, continue  
with chapter “Registration.”  
If the Streamium System does not connect to the Internet,  
press the green button (ANGLE) on the remote control to  
enter the IP settings manually. Please contact your Internet  
service provider to get all the information you need below.  
Next, you will be asked to enter  
– the IP address for the Streamium System  
– the netmask: Make sure all computers in your network,  
as well as the Streamium System, have the same  
netmask. If you are not sure, try 255.255.255.0.  
– Default Gateway:The IP address of your router  
– two DNS.  
1 Connect ETHERNET on the Streamium System to a  
LAN port of your router with the supplied ethernet cable.  
2 Press INTERNET on the remote control.  
If the Streamium System connects to the Internet you will  
be asked to register with “My.Philips.com.” Continue with  
chapter “Registration.”  
Use the number buttons on the remote control to enter  
each setting and press 2OK to confirm each setting.  
If The system could not connect to the server.’  
appears  
If the Streamium System does not connect to the  
Internet  
The Streamium System may not connect to the Internet  
because  
– a connection error has occurred. Press INTERNET again  
to reconnect.  
– the router is not connected to the Internet. Check if the  
computers connected to the router have access to the  
Internet.  
Maybe the system does not connect to the Internet  
because your Internet service provider uses a proxy.You  
need to enter the proxy name and proxy port. Please  
contact your Internet service provider to get this  
information.  
1 Press the green button (ANGLE) on the remote control if  
your Internet service provider uses a proxy.  
– the IP settings are not correct. Continue with “If ‘An IP  
address could not be obtained automatically.Would you  
like to enter your network settings manually?’ appears.”  
– your Internet service provider is using a proxy. Continue  
with “If ‘The system could not connect to the server.’  
appears.”  
2 Use the number buttons to enter the proxy name. Next,  
press 2OK.  
3 Use the number buttons to enter the proxy port. Next,  
press 2OK.  
The Streamium System tries to connect to the Internet.  
PC LINK connection  
G
After the Streamium System has connected successfully to  
the Internet, press PC LINK to connect to the PCs in your  
network.  
The Streamium System may not connect to the PC  
because  
– a connection error has occurred. Press PC LINK again.  
– you have not yet installed the Philips Media Manager  
software on your PC.  
– the PC is switched off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
D) PC only with a network  
interface (Ethernet) card  
Follow these instructions if you want to connect the  
Streamium System directly to your PC without using a  
wireless connection.  
cross over  
ethernet cable  
1 Connect ETHERNET on the Streamium System to the  
ethernet jack of the PC with a cross over ethernet cable  
(not supplied).  
Only use a cross over ethernet cable to connect the  
Streamium System directly to the PC.  
2 If necessary, switch on your PC.  
3 Wait for 10 seconds, then press PC LINK on the remote  
control.  
If the Streamium System connects to the PC, the  
computer name of your PC will be displayed.  
If the Streamium System does not connect to  
the PC  
The Streamium System may not connect to the PC  
because  
– a connection error has occurred. Press PC LINK again.  
– you have not yet installed the Philips Media Manager  
software on your PC.  
– the PC is switched off.  
– the IP address of the Streamium System and that of your  
PC are not in the same subnet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
Registration  
Reviewing and changing network  
settings  
When the Streamium System connects to the Internet for  
the first time, you will be asked to enter your email address.  
The Streamium System tries to connect automatically to  
your network. In case of any problems or after changing  
your network, you can change/review the settings of your  
network here.  
1 Use the number buttons on the remote control to enter  
your email address. If you mistyped, press 1 to delete the  
character you have entered.  
1 If necessary, press INTERNET or PC LINK. Next, press  
0
To exit without registering, press 9.  
SYSTEM MENU.  
Note: Internet services will be available only if you register.  
2 Press 4 repeatedly to select Network. Next, press 2.  
2 Next, press 2OK to send your email address.  
Within a short time, you will receive an email with  
instructions on how to create your user´s account at  
“My.Philips.com.”  
3 Press 4 or 3 repeatedly and select  
NetworkType: to switch between a wired and a  
wireless network,  
Network Cong.: to enter the network settings of  
your network (IP address, netmask, gateway and DNS),  
Wireless Cong.: to enter the settings of your  
wireless network (network name (SSID), channel  
number…)  
Encryption Cong.: to switch WEP encryption on/off  
and to enter the encryption keys  
Proxy Cong.: to enter the proxy name and proxy  
port  
Network Info.: to review the network settings  
(IP address, netmask, …),  
Wireless Info.: to view information about the wireless  
network (network name, signal level, MAC address of  
the wireless card in your Streamium System, …).  
3 Create the user´s account at “My.Philips.com.”  
4 Next, press INTERNET on the the remote control to  
connect to the Internet.  
The available media types (music, video, …) appear.  
About My.Philips.com”  
To activate online services, every owner of a Streamium  
System has to register with My.Philips.com.This website  
allows you to:  
– select and manage online media services  
– manage your Internet favorites  
– add music streams (currently MP3, MP3pro) to the  
Streamium System that are not offered through the  
available Internet service providers  
– find links to background information and online support  
– download PC Link software  
4 Next, press 2 to enter the selected menu.  
– purchase media  
Prerequisites for My.Philips.com:  
– a Streamium System  
– a computer  
– access to the Internet  
– an Internet browser  
– an email address  
To access My.Philips.com, open your Internet browser and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
Internet services  
PC LINK  
The Internet is a rapidly evolving and changing medium.  
Available media services and media service providers may  
change with time.This manual gives a rough overview on  
how to select a media service. Please visit “My.Philips.com”  
for the latest list of services and service providers.  
With PC LINK you get access to the media files (music,  
pictures, video) stored on the PCs of your home network  
and play them on your Streamium System. Select the media  
files directly on the Streamium System.  
For the latest information on the supported media formats  
please visit “My.Philips.com.”  
1 Press INTERNET on the remote control.  
The available media types (music, video, …) appear.  
To use PC LINK  
– your PC must be switched on.  
2 Press 3 or 4 to select a media type. Next, press 2.  
The available service providers for the selected media  
type appear.  
– the Philips Media Manager software must be installed on  
the PCs of your home network. Please refer to the  
installation guide of the Media Manager software for  
installing the software and making media files of your  
PCs available to the Streamium System.  
3 Press 3 or 4 to select a service provider. Next, press 2.  
The following menus will depend on the service provider.  
For example, you may select among different categories  
of music or video clips.  
1 Press PC LINK to connect to the PCs of the network.  
The PCs of your home network on which you installed  
the Philips Media Manager software appear.  
4 Press 2 to enter a category. Press 3 or 4 to select a  
service (e. g. an Internet radio station …). Next, press 2OK  
to start the selected service.  
Notes:  
If No PCs foundappears, the Streamium System has not  
been able to connect to the PCs. Repeat step 1 until the unit  
connects properly or check your network settings.  
If you do not use a router, only one PC will be available.  
0
To go back to the previous menu, press 1.  
2 Press 4 or 3 repeatedly to select a PC. Next, press 2.  
The available media types (music, pictures, video) on the  
computer appear.  
3 Press 4 or 3 repeatedly to select a media type.  
Next press 2.  
The available media files appear.  
4 Press 4 or 3 repeatedly to select a file, then press 2OK to  
play it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
Using the colored multifunction  
buttons SUBTITLE,ANGLE,  
ZOOM and AUDIO  
FAVORITES  
To handle the large amount of Internet services easily, you  
can add Internet services to your favorites.The favorites  
feature is available for INTERNET services only.  
AUX  
TV  
Adding a service to your favorites  
1 Select an Internet service (Internet radio station, movie …).  
(UN) MARK  
FAVORITES  
ANGLE ZOOM  
VIEW  
indicates that the service is already a favorite.  
indicates that the service is not a favorite yet.  
SUBTITLE  
AUDIO  
2 Press  
(UN)MARK FAVORITES to add the service to  
your favorites.  
SYSTEM  
MENU  
DISC  
MENU  
0
To remove a favorite Internet service from your favorites,  
select the service and press  
twice within 2 seconds.  
(UN)MARK FAVORITES  
Note:There may be some media services that you cannot add  
to your favorites.  
RETURN  
RESUME  
The function of the colored buttons on the remote control  
(SUBTITLE,ANGLE, ZOOM and AUDIO) and of the  
2 multifunction buttons on the Streamium System depend  
on the media type you are using.The display on theTV  
screen will indicate which buttons have a special functionality.  
Accessing your favorites  
1 If necessary, press INTERNET.  
2 Press VIEW FAVORITES to view your favorites.  
To view the favorites of one media type only (e. g. music),  
0
INFO!  
press the red multifunction button (SUBTITLE). Press 3 or  
4 repeatedly to select the media type. Next, press 2OK to  
confirm.  
Some Internet media service providers offer additional  
information about the media that is currently playing, e. g.  
the track/artist played on the selected Internet radio  
station.The availability of INFO! depends on the media and  
the media service provider.  
3 Select any favorite and press 2OK to play it.  
G
Press INFO! to receive an email from My.Philips.com with  
information about the media currently played.  
Notes:  
The requested information is also available at your  
My.Philips.com account.  
If no information is available, NO INFO AVAILABLE  
appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet and PC Link  
Recently used media services –  
Selecting a user  
1 Press USER to display the users of this Streamium System.  
RECENT  
RECENT lets you review and quickly access the media  
2 Press 3 or 4 repeatedly to select a user.  
services you have been using recently. RECENT displays the  
last 20 media services you have been using. RECENT is  
available for INTERNET only.  
3 Press 2OK to confirm.  
The nickname of the selected user appears.  
1 Press RECENT to display the media services you have used  
Removing a user  
recently.  
1 Press 3 or 4 repeatedly to select the user you want to  
remove from the unit.  
2 Press 4 or 3 repeatedly to select a media service.  
2 Press the red multifunction button (SUBTITLE) on the  
3 Press 2OK to start the media service.  
remote control to remove the user.  
0
To switch RECENT off and return to the normal display,  
press RECENT again.  
3 Enter the password of the primary user, i. e. the user who  
was the first to register this unit.  
Multiple users USER  
4 Press 2OK to confirm.  
You can “personalize” this Streamium System for various  
users. Each user will have his own user account at  
My.Philips.com, his own favorites, and get information to his  
email address when pressing INFO!  
The user will be removed from the unit.  
Notes:  
You cannot remove the primary user on the unit. But you  
can delete the account of the primary user at “My.Philips.com”  
or change its personal data at any time.  
Some features (e .g . Parental level) are only available to the  
primary user of the unit.  
Adding a new user  
1 Press USER to display the users of this Streamium System.  
2 Press the green multifunction button (ANGLE) on the  
remote control to add a new user.  
3 Use the number buttons to enter the email address of the  
new user.  
4 Press 2 OK to confirm.  
5 If you entered the email address of a user already  
registered with “My.Philips.com”:  
Use the number buttons to enter the user´s password.  
Next, press OK.  
If you entered the email address of a user who has  
not registered yet:  
An email will be sent to the new user with further  
instructions on how to register.The user will be available on  
this Streamium System shortly after registration.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
General Information  
Region Codes  
When referring to this manual, remember …  
DVDs must be labelled for ALL regions or for Region 1  
in order to play on this system.You cannot play discs that  
are labelled for other regions.  
[DVD] Indicates the feature may be on some DigitalVideo  
Discs.  
[CD] Indicates the feature may be on some Audio  
Compact Discs.  
The number inside the globe refers to a region of the  
world.A disc encoded in a specific region format can play  
only on DVD Players that have the same region code. So, if  
a disc is labelled for Region 2, you cannot play that DVD on  
this Streamium System (because it is a Region 1 system).  
[VCD] Indicates the feature may be on someVideo  
Compact Discs.  
[MP3] Indicates the feature may be on some MP3 Discs.  
Playable Discs  
This system will play DigitalVideo Discs (DVDs),  
(Super)Video CDs, and Audio CDs.This system will also  
play MP3 files (music tracks compressed with MPEG 1  
Audio Layer 3 technology) recorded onto a Compact  
Disc Recordable (CD-R) or a Compact Disc Rewritable  
(CD-RW).  
Available disc Features  
Features described in this manual may not be available on  
every disc. If the feature is not on the disc, you cannot use  
the system to make the feature available.An “X” will appear  
in the top left corner of theTV screen if you try to access a  
feature that is not on the disc.  
Discs having the following logos should play on this  
Streamium System.  
This Streamium System supports only the first session of  
multi-session discs.  
Important!  
1)This system is designed for regular discs.  
Therefore, do not use any accessories such as disc  
stabilizer rings or disc treatment sheets, etc. as  
offered on the market, because they may cause  
jamming of the changer mechanism.  
2) Do not load more than one disc into one  
disc tray.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
DVD  
INTERNET  
TUNER  
AUX  
PC LINK  
TV  
(UN) MARK  
VIEW  
FAVORITES  
ANGLE  
ZOOM  
SUBTITLE  
AUDIO  
SYSTEM  
MENU  
DISC  
MENU  
RETURN  
RESUME  
Disc Playback [DVD/VCD/CD]  
1 Press DVD on the remote control to turn on the system.  
Resume [DVD/VCD]  
The resume feature is available with the last five DVDs and  
(Super)Video CDs you played.  
2 Turn on yourTV. Set it to the correctVideo In channel.  
You should see the Streamium System’s blue background  
screen on theTV.  
1 Press 9 on the remote control to stop playback.  
Resume feature is activated.  
The next time you start playing the same disc, play will  
resume at the same point at which you last stopped it.  
3 Press DISC 1 (OPEN/CLOSE /) on the Streamium System  
to open disc tray 1. Load your disc in the tray, with the label  
facing up and the shiny side facing down. If the disc is two-  
sided, ensure that the side you wish to play is facing up.  
0
0
However, if you press 9 twice to stop disc playback, resume  
will not be activated.The next time you start playing the  
same disc, play will start at the beginning of the disc.  
4 Press DISC 1 (OPEN/CLOSE /) again to close the tray.  
If the resume symbol appears on theTV screen when you  
reload a disc, play will resume from the point at which you  
last stopped playback if you press 2 while the resume  
symbol is still displayed.  
0
To load the rest of the disc trays, press the respective  
DISC (OPEN/CLOSE /) button.Then press the same  
button again to close the disc tray.  
5 Press DVD on the remote control repeatedly or rotate  
SOURCE on the Streamium System to select the disc that  
you want to play.  
Note: Resume may not be available with some discs.  
Chapter Preview [DVD]  
This feature allows you to preview the first 10 seconds of  
each DVD chapter.  
6 If playback does not start automatically, press 2OK.  
0
If DVD playback does not start automatically, a disc menu  
may appear. If the title or chapter selections are numbered,  
press a Number button on the remote control to select an  
item. Or press 1, 2, 3, 4 to select an item for playing, then  
press 2OK.  
1 Press SYSTEM MENU. Next, select Toolbar View ➜  
Chapter Preview.  
2 Press 2 to select On. Next, press SYSTEM MENU to exit  
the system menu.  
The first 10 seconds of every chapter will be shown.  
After that, playback will stop.  
0
Press ; to pause playback temporarily.To resume playback,  
press 2OK.  
0
To switch Chapter Preview off and continue with  
7 Press 9 to stop playback.  
normal playback, press 2OK.  
Note:You can only open one disc tray at a time. If the current  
disc tray is open and you attempt to open another disc tray,  
the first disc tray will close automatically before the second disc  
tray can be opened.  
Selecting next disc  
0
Press DVD on the remote control or rotate SOURCE on  
the Streamium System to select the next disc you wish to  
play.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Chapter/track selection  
Searching in the System Menu  
In the system menu, additional search features are available:  
Time Search, Fast Motion, Slow Motion.  
[DVD/VCD/CD]  
1 Press T briefly during playback to go to the next  
track/chapter.  
1 Press SYSTEM MENU.  
Press S briefly to return to the beginning of the current  
track/chapter.  
2 Select Toolbar Search.  
Time Search [DVD/VCD]  
Press S repeatedly and quickly to step back to previous  
tracks/chapters.  
Time Search lets you choose a specific elapsed playing time  
at which you want to begin disc playback.  
2 To go directly to any track/chapter during playback, press  
the number buttons to enter the track/chapter number.  
The System Menu Bar may appear briefly. It will  
disappear once the new track/chapter starts to play.  
1 Select Time.  
Playback will pause.  
A time edit box will appear, showing the elapsed playing  
time of the current disc, or the point at which the disc is  
currently.  
Make sure the track/chapter number you enter is available  
on the disc.When you enter an invalid number  
an “X” may appear in the top left corner of theTV  
screen.  
the current track or Chapter will continue to play.  
an incorrect track/chapter may begin to play.  
DVD  
Stop  
View  
Search  
Program  
Toolbar  
Time  
Fast  
Forward and Reverse Searching  
[DVD/VCD/CD/MP3]  
Slow  
You can do a forward or reverse searching while playing  
back a DVD,VCD, CD or MP3 disc.  
Frame by Frame  
1 On a DVD or (Super)Video CD, to search the disc at four  
times the normal speed, press and hold S or T for  
about two seconds during playback.To search at 32 times  
the normal speed, press and hold S or T again  
(DVD only).  
2 Press the number buttons to enter the time at which you  
want playback to begin. Enter the hour, minute, and second  
from left to right in the box.  
The sound will be muted.  
Make sure the time you enter is within the total playing  
time of the currentTitle/track.  
On an Audio CD, to search the disc at four times the  
normal speed, press and hold S or T for about two  
seconds during playback. Sound will be intermittent.To  
search at eight times the normal speed, press and hold  
S or T again.  
3 Press 2OK.  
Playback will start at the point you have selected after a  
few seconds.  
The sound will be muted.  
0
If you enter an invalid time, the incorrect information will  
blink in the time edit box. Enter a time that is available in  
the currentTitle/track and press 2OK again.  
2 To end the search, press 2OK to resume playback or press  
9 to stop playback.  
Note:This feature is available in the System Menu as Fast.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Fast, Slow [DVD/VCD]  
1 Select the speed:  
Repeat [DVD/VCD/CD]  
You may play a chapter, track, title, or entire disc repeatedly.  
Fast: -32x, -8x, -4x (backward), or 1x, 4x, 8x, 32x (forward).  
-32x, 32x … DVD only.  
1 During playback, press REPEAT on the remote control  
repeatedly to choose a repeat mode.  
Slow: -1, -1/2, -1/4 or -1/8 (backward), or 1/8, 1/4, 1/2 or 1  
(forward).  
Sound will be muted during Fast (Slow) Motion playback.  
0
0
0
To repeat the current chapter/track, press REPEAT once.  
REPEAT CHPTor REPEAT TRKwill appear on the  
display of the Streamium System.  
0
Press ; on the remote control to pause the picture.  
To repeat the current title, press REPEAT repeatedly until  
REPEAT TITLappears on the display of the Streamium  
System.  
2 To return to normal playback, press 2OK.  
Notes:  
Start forward Fast Motion playback simply by pressing 2  
during playback. Press 2 repeatedly to choose a Fast Motion  
speed.  
If you reach the beginning of the disc or title during a reverse  
search, regular playback will resume automatically.  
To repeat the entire disc, press REPEAT repeatedly until  
REPEAT DISCappears on the display of the Streamium  
System.  
2 To cancel repeat playback, press REPEAT repeatedly until  
REPEAT OFFappears on the display of the Streamium  
System.  
Still Picture/Frame-by-Frame  
Playback [DVD/VCD]  
Notes:  
This feature allows you to view individual frames as still  
pictures during playback.  
Repeat can only be used for the selected disc tray.  
Repeating more than one disc tray is not possible.  
1 During playback, press ; on the remote control.  
A still picture will appear on theTV screen.  
Shufe [DVD/VCD/CD]  
On a DVD, this shuffles the playing order of chapters within  
a title, if the title includes more than one chapter. On an  
Audio CD and (Super)Video CD, activating Shuffle will play  
all the tracks in random order.  
2 To advance the still picture one frame at a time, press ;  
repeatedly.  
3 To resume normal playback, press 2OK.  
Notes:  
1 Press SHUFFLE on the remote control.  
SHUFFLEwill appear briefly on the display of the  
Streamium System.The tracks or chapters will begin  
playing in random order.  
You can also pause the picture by pressing 3 during  
playback.  
Frame-by-Frame playback is also available in the System  
Menu.  
2 To return to normal order playback, press SHUFFLE again.  
Regular playback will resume from the current  
track/chapter.  
SHUFFLE OFFwill appear briefly on the display of the  
Streamium System.  
Notes:  
Shuffle can only be used for the selected disc tray.  
Shuffling more than one disc tray is not possible.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Program [DVD,VCD, CD, MP3]  
Reviewing / Deleting programmed tracks  
Playlist allows you to view the tracks, chapters or titles of  
your program.  
Program allows you to play your favorite titles/chapters or  
tracks/indexes in the order you select.  
1 Press 4 repeatedly to select Playlist. Next, press 2.  
DVD  
Stop  
Program View  
Program  
2 Press 3 or 4 repeatedly to scroll through the tracks,  
Toolbar  
chapters, or titles of your program.  
0
To delete a track, chapter or title from your program, press  
3 or 4 repeatedly to select the track, then press 2OK.  
The selected track, chapter or title will be deleted from  
your program.  
Program  
Tracks  
Playlist  
Clear all  
3 Press 1 to exit the menu.  
Note: Playlists generated on a computer and stored on the  
CD-ROM are not supported.  
Use or to select other options, = to enter the option  
Clearing the entire program  
1 Press 4 repeatedly to select Clear all.  
1 Press SYSTEM MENU.  
2 Select Toolbar Program.  
2 Press 2 to clear the entire program.  
Cleared will be displayed and the program will  
be cleared.  
Programming tracks/chapters/titles  
1 To program your favorite tracks, chapters, or titles, press  
4 repeatedly to select Tracks. Next, press 2.  
2 Press 3 or 4 to select the desired track, chapter, or title,  
then press 2OK.  
The selected track, chapter, or title will be stored.  
0
To store other tracks, chapters or titles, repeat step 2.  
3 Press 1 to exit the menu.  
Playing a program  
1 Press 3 to select Program.  
2 Press 2 repeatedly to select On. Next, press 2OK.  
FTS on (Favorite track selection) appears.  
Your program will play.  
0
To return to normal playback, select Toolbar ➜  
Program Program. Press 2 repeatedly to select off.  
Next, press 2OK.  
FTS off appears.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Disc Menu [DVD]  
1 Press DISC MENU on the remote control.  
If the current title of the current disc has a menu, the title  
menu will appear on the screen.  
Camera Angle [DVD]  
Some DVDs include scenes recorded from different angles.  
You can watch these different angles if the angle symbol  
F ANGLE appears during DVD playback. If the DVD was  
not recorded with different angles, this feature is not  
available. Check the DVD case first to see if multiple angles  
are available.  
Otherwise, the main DVD disc menu will appear.  
The menu may list camera angles, spoken language and  
subtitle options, chapters for the title, or other disc  
features.  
1 During DVD playback, F ANGLE will appear at the top  
of theTV screen if multiple angles are available.  
2 Press 1 2 3 4 on the remote control to select the desired  
items in the menu, then press 2OK.  
2 Press ANGLE on the remote control during DVD playback.  
The available angles will appear.  
3 If you do not start playback from the menu, press  
DISC MENU to exit.  
3 Press ANGLE or 4 or 3 repeatedly to select the angle  
from which you want to watch the current scene.  
Audio [DVD,VCD]  
4 Press 2OK to exit.  
Some DVDs are recorded in different languages.You may  
be able to hear the same movie dialog in English, French,  
Spanish, etc.  
Note:Angle is also available in the System Menu.  
Zoom [DVD]  
1 Press AUDIO on the remote control during DVD playback.  
This feature lets you enlarge the video image during  
playback and pan through the enlarged image.  
2 Press AUDIO repeatedly within five seconds to see the  
different languages available. Or press 3 or 4 to see the  
different languages.  
1 Press ZOOM on the remote control during playback.  
Four arrows and a yellow dot appear on theTV screen.  
The language you select will be audible in a few seconds.  
Zoom 4  
3 Press 2OK to exit.  
Note:Audio is also available in the System Menu.  
Subtitles [DVD]  
Some DVDs include subtitles in different languages.  
You can choose subtitles only if they are available on  
the DVD.  
1 Press SUBTITLE on the remote control during DVD  
playback.  
Use ≠=+ to pan, OK to zoom in, RETURN to zoom out, ZOOM  
key to exit.  
2 Press SUBTITLE repeatedly within five seconds to see  
the different subtitle languages. Or press 3 or 4 to see  
the different subtitle languages.  
2 While the arrows and the yellow dot are displayed:  
Press 2OK repeatedly to select the zoom factor: Zoom 1,  
Zoom 2, Zoom 4, Zoom 8.  
The language may be abbreviated or numbered.  
Subtitles will appear after a few seconds.  
Press 1 2 3 4 to move to the left, right, top, or bottom of  
the picture.  
3 Press 2OK to exit.  
Note: Subtitle is also available in the System Menu.  
3 Press ZOOM to exit.  
0
To return to normal playback, press ZOOM. Next, press  
2OK repeatedly to select Zoom 1. Press ZOOM again.  
Note: Zoom is also available in the System Menu.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Selecting the menu language,  
Default Audio (DVD)  
Select the audio language you prefer whenever you play  
any DVD. If the default language is not available on the  
DVD, the first audio language on the disc will be selected.  
country, audio language and  
subtitle language  
These features are only available when DVD is selected.  
G
Press 3 or 4 to select the desired default audio language,  
then press 2OK.  
1 Press SYSTEM MENU on the remote control.  
2 DVD: Select Setup Language.  
Default Subtitle (DVD)  
Select the subtitle language you prefer whenever you play  
any DVD. If the default subtitle is not available on the DVD,  
the first subtitle on the disc will be selected.  
DVD  
Stop  
Language View  
Program  
Setup  
Menu Language  
Bahasa Melayu  
English  
G
Press 3 or 4 to select the desired default subtitle language,  
then press 2OK.  
Menu Language  
Country  
Español  
Playback Control (PBC) [VCD]  
This feature is available only for (Super)Video CDs  
compatible with PBC. (Super)Video CDs with Playback  
Control offer additional features. Check the (Super)Video  
CD case for details.  
Français  
Português  
Default Audio  
Default Subtitle  
Switching PBC on/off [VCD]  
Menu Language [DVD,VCD, CD, MP3]  
Select your preferred language for the System menu.  
1 Press SYSTEM MENU on the remote control.  
2 Select Setup Features PBC.  
G
G
Press 3 or 4 to select the desired language , then press  
2OK to confirm.  
3 Press 2 repeatedly to switch PBC on or off.  
Next, press 2OK.  
Country [DVD,VCD, CD, MP3]  
Select the country where this Streamium System is used.  
Note: If a (Super) Video CD does not play, set PBC to Off.  
Playing a (Super)Video CD with PBC  
1 Load a (Super)Video CD with PBC and press 2OK.  
The (Super)Video CD will show instructions or options  
on theTV screen.  
Press 3 or 4 to select the country, then press 2OK to  
confirm.  
2 Use the remote control buttons as directed by the (Super)  
Video CD.  
0
0
To return to a previous menu, press RETURN.  
If a PBC menu has titles, select a title directly by pressing  
the number buttons on the remote control.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Playing MP3 discs  
1 Insert a disc with MP3 files.  
MP3 is a compression method that makes digital music files  
up to 10 times smaller without losing significant sound  
quality. MP3 is common on the Internet, letting you transfer  
tracks to your computer and onto a CD Recordable or  
CD Rewritable.  
It may take the Streamium System several seconds to  
recognize the MP3 disc. MP3 text may appear on theTV  
screen or the display of the Streamium System.This  
could be the song title, artist name, track number, etc.,  
depending on how you recorded the MP3 files.  
MP3 files are recorded at a certain bit rate or speed. For a  
good sound quality a bit rate of 128 kbps or higher is  
recommended.  
MP3  
2 Play  
Audio Menu  
Track  
This system supports the following formats:  
– File names ending in .mp3  
– Names of albums, artists, etc., with a maximum of  
30 characters  
– Maximum nested directory of eight levels  
– Sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz  
– Bit-rates: 32-320 kbps  
1 Love  
2 People  
3 Peace  
4 Sunshine  
5 Wind  
6 Storm  
7 Air  
– Multisession discs, if finalized  
Use or to change values, + or = for other lists.  
The following formats are not supported:  
– File names ending in .wma, .aac, .dlf, .m3u, and .pls  
– Chinese file names  
2 Press 3 or 4 or use the number buttons to select an  
album.  
– unfinalized discs  
– discs recorded in UDF format  
3 If you want to play the selected album, press 2OK.  
If you want to play a track of the album, press 2 to enter  
the selected album. Press 4 or 3 repeatedly or use the  
number buttons to select a track. Next, press 2OK to play  
the selected track.  
0
To skip to another track, press 3 or 4 or use the number  
buttons.  
0
0
To search within an MP3 track, press S or T.  
To select an available repeat option, press REPEAT  
repeatedly.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc  
Playing picture CDs  
With the Streamium System you can play Kodak Picture CDs  
and your own CD-R(W)s with JPEG pictures (.jpg, jpeg).  
1 Insert a disc with JPEG pictures.  
It may take the Streamium System several seconds to  
find the pictures.  
A preview of 4 pictures will be displayed.  
0
To see the next 4 pictures, press T. For the previous  
4 pictures, press S.  
2 Press 1, 2, 3 or 4 to select a picture.  
3 Press 2OK to display the picture.  
The selected picture will be displayed.  
0
To skip to the previous or next picture, press S or T.  
Note: Some pictures may appear distorted.  
Rotating a picture  
You can rotate a picture in 90 degree steps. Rotate only  
affects the selected picture.  
1 Select a picture and press 2OK to display the picture.  
2 Press SYSTEM MENU.  
3 Select Toolbar View Rotate.  
4 Press 2 to enter the menu. Next, press 1 or 2 to select  
the rotation angle.  
5 Press 2OK to confirm.  
The current picture will rotate.  
6 Press SYSTEM MENU to exit the menu.  
Playing a slide show  
Play all the pictures of the inserted disc in sequence.  
1 Select a picture and press 2OK to display the picture.  
2 Press 2OK again to display all pictures of the inserted disc  
in sequence.  
0
To adjust the time each picture will appear on the  
TV screen, press SYSTEM MENU on the remote control  
and select Toolbar Slideshow PictureTime.  
Select Slow, Medium, or Fast. Next, press SYSTEM MENU to  
exit the menu.  
3 To stop the slide show, press 9.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Access Control  
Access Control [DVD]  
Change PIN  
Some DVDs may not be suited for children.With Access  
Control you can limit the scenes to be shown.This feature  
will not work if the disc is not provided with access control  
information. Philips cannot guarantee the availability of  
Access Control with all discs, and therefore denies any  
liability associated with unintended viewing of discs. Make  
sure your discs play according to your Access Control  
settings before you allow children to access to the Streamium  
System.  
1 Use the number buttons to enter the current Pin.  
Enter New Pin appears.  
2 Use the number buttons to enter the new Pin.  
Conrm Pin appears.  
3 Enter the new Pin again to confirm it.  
The Pin code is changed.  
Note: Sometimes, the system will ask you to enter your code  
twice to confirm the code.This is normal.  
1 Press SYSTEM MENU on the remote control.  
Disc Lock  
2 DVD: Select Setup Access.  
Use Disc Lock to disable viewing of a specific disc,  
regardless of its rating.A DVD must be in the disc tray.  
DVD  
Stop  
1 Press 2 repeatedly to select  
Access  
On: Disc Lock is switched on. Locked discs will not play  
unless you enter your four digit code.  
Off: Disc Lock is switched off.  
Setup  
Enter PIN  
* * * *  
2 Next, press 2OK.  
Parental Level  
Change PIN  
Disc Lock  
Note: Lock/unlock each side of two sided DVDs and each  
volume of multi-volume (Super) Video CDs.  
If you forget your Pin  
1 When asked to enter the PIN code, press 9.  
2 Press DVD repeatedly to select a disc tray with no disc.  
3 Press SYSTEM MENU.  
3 Press 4 to select Enter PIN. Next, press 2.  
4 Use the number buttons to enter the four digit code.When  
4 Select Setup Acess Enter PIN. Next, press 2.  
using the Streamium System for the first time, enter “0000.”  
5 Press 9 4 times.  
0
To exit the menu without entering the PIN code, press  
SYSTEM MENU.  
Not possible now appears.  
Enter New Pin appears.  
5 Press 4 repeatedly to select either Parental Level,  
Change PIN or Disc Lock. Press 2 to enter the selected  
menu.  
6 Use the number buttons to enter the new Pin code.  
Conrm Pin appears.  
7 Enter the new Pin code again to confirm it.  
Parental Level  
The Pin code is changed.  
DVDs may contain alternative scenes that conform to the  
Parental Level, or movie rating, that you select.The Parental  
Level may apply to the complete disc or to certain scenes  
on the disc. Follow the steps below to set the Parental  
Level at which you want the discs to play.  
G
Press 3 or 4 or the number buttons (0-8) to select a  
rating, then press 2OK.  
0
Select “0” (– –) to deactivate Parental level. Or choose a  
rating between 1-8; discs or scenes with the same rating or  
lower will play. Higher rated discs or scenes will not play  
unless you enter your four digit code. Follow the directions  
given by the disc to enter your code and start playback.  
Note:The rating numbers compare to standard U.S. movie  
ratings as follows: 7 for NC-17; 6 for R; 4 for PG-13; 3 for PG,  
and 1 for G.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Menu Picture settings  
Adjusting the Picture Settings  
Sharpness  
This submenu allows you to adjust the settings for color,  
brightness, contrast, sharpness, saturation and video shift.  
These features are only available when DVD is selected.  
G
Press 1 or 2 to adjust to the desired picture sharpness,  
then press 2OK.  
Saturation  
1 Press SYSTEM MENU on the remote control.  
G
Press 1 or 2 to adjust the color saturation, then  
press 2OK.  
2 DVD: Select Preferences Picture.  
Video Shift  
Color Settings  
Use this feature to center the picture horizontally on the  
TV screen, or “shift the video” from left to right.  
You can select predefined color settings or make your own  
personal color settings.Although similar to adjusting  
Brightness, Contrast, etc. on yourTV, these settings affect  
the picture the Streamium System sends to theTV.  
G
Press 1 or 2 to center the picture on yourTV screen, then  
press 2OK.  
DVD  
Stop  
Picture  
Preferences  
Color settings  
Personal  
Colour settings  
Brightness  
Contrast  
Rich  
Natural  
Soft  
Animation  
Sharpness  
Use or to change the values, OK to confirm, + to leave the  
sub-menu.  
G
Press 3 or 4 to select Rich, Natural, Soft, Animation  
or Personal, then press 2OK.  
You may want to play a disc for a few minutes in each  
setting to decide which you prefer.  
If you selected Personal, adjust the brightness, contrast,  
sharpness and saturation settings manually.  
Brightness  
G
G
Press 1 or 2 to adjust to the desired picture brightness,  
then press 2OK.  
Contrast  
Press 1 or 2 to adjust to the desired picture contrast,  
then press 2OK.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Menu Audio settings  
Night Mode  
Digital Output  
Night mode reduces the volume differences between loud  
and quiet passages.At night, you can enjoy surround effects  
at low volume without disturbing your children or  
neighbors. Night mode is available only for Dolby Digital  
and MPEG multi-channel signals and only if supported by  
the source material (e. g. a movie).  
Adjust Digital Output if you have connected the Streamium  
System´s DIGITAL OUT to external digital equipment.  
1 Press SYSTEM MENU on the remote control.  
2 DVD: Select Setup Audio Menu Digital Output.  
INTERNET, PC LINK: Select Audio Digital Output.  
1 Press SYSTEM MENU on the remote control.  
3 Press 3 or 4 to select  
Off if you do not use DIGITAL OUT in your  
connections.  
2 DVD: Select Preferences Sound Night Mode.  
INTERNET, PC LINK: Select Audio Night Mode.  
PCM only if you use DIGITAL OUT in your  
connections, but the Stereo equipment does not include  
a built-in digital multi-channel decoder.  
All if you have connected the Streamium System to  
Stereo equipment that has a built-in multi-channel  
decoder.  
DVD  
Stop  
View  
Sound  
Program  
Preferences  
Night mode  
Analogue Output  
ClearVoice  
off  
on  
4 Next, press 2OK to confirm.  
Use = to toggle the value, or to move to other options.  
3 Press 2 repeatedly to switch Night Mode on or off. Next,  
press 2OK to confirm.  
Analogue Output  
This feature is similar to selecting the surround sound with  
SURROUND on the remote control.  
1 Press SYSTEM MENU on the remote control.  
2 DVD: Select Preferences Sound Analogue  
Output.  
INTERNET, PC LINK: Select Audio Analogue  
Output.  
3 Press 4 repeatedly to select Multi-channel, Hall or  
Stereo. Next, press 2OK to confirm.  
Note: If you connected any equipment (e. g. a tape deck) to  
LINE OUT on the Streamium System and the equipment is  
suited for stereo signals only, set Analogue output to  
Stereo.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Menu Audio settings  
Speaker layout, speaker distances  
and volume balance  
Speaker distances and volume balance  
Instead of selecting a speaker layout, you can set the  
distances between the speakers and your listening position  
and the volume balance between the speakers.  
For optimal multi-channel sound experience, the Streamium  
System can take the arrangement of your speakers and  
your listening position into account. Select from different  
speaker layouts or set the speaker distances and the  
volume balance between the speakers individually.  
To perform these settings, press SYSTEM MENU on the  
remote control and select  
DVD: Setup Speakers,  
When DVD is selected, the speaker layout is not available.  
But if you select a speaker layout when INTERNET,  
PC LINK or AUX is selected, this setting will also be valid  
for DVD.  
INTERNET, PC LINK: Audio Speaker Layout ➜  
Personal.  
Speaker layout  
1 Press AUX (or INTERNET or PC LINK) on the remote  
control.  
2 Press SYSTEM MENU on the remote control.  
3 Select Audio Speaker Layout. Next, press 2 to enter  
the menu.  
4 Press 4 or 3 to select the speaker layout which resembles  
the speaker arrangement in your home (Rectangular 1,  
Rectangular 2, Trapezoid 1, Trapezoid 2) or select  
Personal to adjust the speaker distances and the volume  
balance individually.  
5 Press 2 to enter the selected speaker layout. Next, use  
1, 2, 3, 4 to select your listening position in the layout.  
6 Press 2OK to confirm.  
7 Press SYSTEM MENU to exit the system menu.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Menu Additional features  
Help Line and Status window  
Sleep timer  
These features are only available when DVD is selected.  
1 Press SYSTEM MENU.  
The sleep timer (Smart Power Off) enables the Streamium  
System to switch automatically to standby 20 minutes after  
a disc or an online service has stopped playing if no other  
activities have been performed.  
2 DVD: Select Preferences Features.  
Help Line  
When INTERNET or PC LINK is selected, the “Sleep timer”  
feature is called “Smart Power Off.”  
Set Help Line to On if you want to see helpful  
information in the System Menu.When you select an item  
in the System Menu, an explanation will appear at the  
bottom of theTV screen.  
1 Press SYSTEM MENU on the remote control.  
2 DVD: Select Setup Features Sleep timer.  
INTERNET, PC LINK: Select Preferences Smart  
Power Off.  
DVD  
Stop  
Features View  
Program  
3 Press 2 repeatedly to switch the sleep timer on or off.  
Preferences  
Next, press 2OK to confirm.  
Help line  
Adjusting the display brightness  
1 Press SYSTEM MENU on the remote control.  
Status Window  
2 INTERNET, PC LINK: Select Preferences Dim Level.  
Helpful text will appear here if Help Line is On.  
3 Press 1 or 2 to select one of the levels for the display  
brightness.  
4 Next, press 2OK to confirm.  
G
Press 2 repeatedly to switch Help Line on or off, then  
press 2OK to confirm.  
Online upgrade  
The system checks if the latest software is installed on your  
Streamium System. For this feature, you need broadband  
Internet access.This feature is only available when  
INTERNET or PC LINK is selected.  
Status window  
The Status window may indicate when the disc tray is  
opening or closing, what type of disc is loaded, and total or  
remaining disc playback time.  
1 Press SYSTEM MENU on the remote control.  
G
Press 2 repeatedly to switch Status window on or off, then  
press 2OK to confirm.  
2 INTERNET, PC LINK: Select Online Upgrade.  
Resetting the Streamium System  
When resetting the Streamium System, you will lose all  
your settings (network settings,TV settings, etc.).After  
resetting do not forget to perform theTV settings of  
chapter “Settings for theTV.”  
1 Press SYSTEM MENU.  
2 INTERNET, PC LINK: Select Reset settings.  
Next, press 2.  
Do you want to delete all settings appears.  
3 Press the red button (SUBTITLE) to confirm.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tuner  
DVD  
INTERNET PC LINK TUNER  
Automatic Preset Programming  
1 PressTUNER on the remote control to selectTUNER.  
AUX  
TV  
2 Press and hold  
VIEW FAVORITES for 5 seconds.  
AUTO PROGRAM FAVORITE STATIONS?is displayed.  
(UN) MARK  
FAVORITES  
ANGLE ZOOM  
VIEW  
SUBTITLE  
AUDIO  
3 Press the red button (SUBTITLE) on the remote control to  
select YES.  
SYSTEM  
MENU  
DISC  
MENU  
AUTO PROGRAM IN PROGRESS...is displayed.  
All available radio stations with sufficient signal strength  
will be stored automatically.  
When all the available radio stations are stored or the  
memory for 40 presets is used, the last preset radio  
station will be played.  
RETURN  
RESUME  
To stop storing the automatic preset  
G
Press 9.  
Tuning to radio stations  
1 PressTUNER on the remote control to selectTUNER.  
Storing favorite radio stations  
manually  
The current radio frequency will appear on the display.  
If an FM station is received in stereo,  
is displayed.  
You can store up to 40 favorite radio stations in the  
memory.  
=
2 PressTUNER on the remote control again to select the  
desired waveband: FM or AM.  
1 Tune to your desired radio station (refer to “Tuning to radio  
stations”).  
3 Press and hold 1 or 2 on the remote control until the  
frequency indication starts to change, then release.  
SEARCHING...will be displayed until a radio station  
with sufficient signal strength is found.  
2 Press  
(UN)MARK FAVORITES on the remote control.  
The current station will be stored in the next available  
preset number.  
will appear at the side of the display.  
4 If necessary repeat step 3 until you find the desired radio  
station.  
0
Repeat steps 1–2 to store other radio stations.  
To tune to a weak station  
Notes:  
Press 1 or 2 on the remote control briefly and repeatedly  
until optimal reception is achieved.  
The favorites function forTUNER is not user dependent.The  
same favorites list applies for all users.  
If you attempt to store more than 40 preset radio stations,  
NO MORE FAVORITES CAN BE ADDEDis displayed.  
Selecting a favorite radio station  
1 Press 3 or 4 on the remote control to select the desired  
preset radio station from the favorite list.  
2 Press 2OK on the remote control to confirm.  
The preset number, radio frequency, and waveband are  
displayed.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tuner  
Deleting a favorite radio station  
1 Press 3 or 4 on the remote control to select the desired  
preset radio station from the favorite list.  
2 Press  
(UN)MARK FAVORITES on the remote control.  
ERASE SELECTED RADIO STATION?is displayed.  
3 Press the red button (SUBTITLE) on the remote control to  
delete the radio station.  
The radio station continues to play but has been deleted  
from the favorites list.All following favorite radio stations  
will decrease their preset number by one.  
Deleting all favorite radio  
stations  
1 WhileTUNER is selected, press and hold  
(UN)MARK  
FAVORITES for more than 5 seconds.  
DO YOU WANT TO DELETE ALL TUNER FAVOURITES?is  
displayed.  
2 Press the red button (SUBTITLE) on the remote control to  
confirm.  
All the preset stations will be deleted.  
Changing the order of favorite  
radio stations  
1 Press 3 or 4 on the remote control to select the desired  
preset radio station from the favorite list.  
2 To move the radio station down in the favorites list, press  
the red button (SUBTITLE) on the remote control.  
To move the radio station up in the favorites list, press the  
green button (ANGLE) on the remote control.  
0
If necessary repeat steps 1–2 for other radio stations.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the unit yourself as this  
will invalidate the warranty. Do not open the unit as there is a risk of  
electric shock.  
If a fault occurs, first check the points listed before taking the unit for  
repair. If you are unable to solve a problem by following these hints,  
consult your dealer or service center.  
Problem  
Solution  
Disc does not playback.  
– Make sure the correct program number (channel number) for the Streamium  
System has been selected on theTV.  
– Make sure the Streamium System and theTV are connected properly.  
– Make sure the disc is not scratched or dirty. Replace or clean the disc.  
– Make sure the disc has been inserted, printed side up.  
– Make sure you have inserted the right disc type: DVD, (Super)Video CD,  
Audio CD, CDR(W) or MP3-CD.  
– Make sure the region code of the DVD matches the Streamium System.  
– Change the Parental level (See “Access control”).  
– Press SYSTEM MENU to exit the system menu.  
Cannot activate some features,  
such as angles, subtitles or  
multi-language Audio.  
– The features may not be available on the disc.Try another disc.  
No sound or distorted sound  
– Adjust the volume.  
– Check the speaker connections and settings.  
– Disconnect the headphones.  
– Press 2OK to resume normal playback.  
– Press the corresponding source button on the remote control (DVD,  
INTERNET, ) to choose the source you want to hear through the  
Streamium System.  
No sound from the center and/or  
surround speakers.  
– Make sure the center and surround speakers are connected correctly.  
– Press SURROUND on the remote control to select another surround effect.  
No digital surround sound  
– Make sure the selected source (inserted disc, Internet media, …) supports  
digital surround sound (Dolby Digital, DTS, MPEG).  
– Make sure external exquipment that plays digital surround sound is  
connected to DIGITAL IN.  
Radio reception is poor.  
– If the signal is too weak, adjust the antenna or connect an external antenna  
for better reception.  
– Place the antenna farther away from other equipment (TV,VCR, digital  
equipment, …) that may disturb radio reception.  
– Increase the distance between the Streamium System and yourTV orVCR.  
The remote control does not function  
properly.  
– Press the desired source button on the remote control (DVD,  
INTERNET, ), then press the desired function button (e. g. 2OK, T).  
The Streamium System does not  
respond to any of the buttons,including  
the standby button.  
– Unplug the power cord and wait at least 10 seconds before reconnecting  
the unit.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Solution  
VCR or other recording equipment  
connected to the Streamium system  
does not record sound correctly  
– Press SURROUND repeatedly to select STEREO.  
– With equipment connected to DIGITAL OUT, make sure the setting of  
“Digital output” in the System menu is correct. See “Digital output” on  
page 41.  
No picture or distorted picture  
– Make sure the P-SCAN switch on the rear of the Streamium System is set  
to ON if you connected a Pro Scan capableTV to COMPONENT PR PB Y on  
the Streamium System.  
– Press and hold the green button (ANGLE) on the remote control for  
6 seconds to reset the video settings. Next, read “No picture or distorted  
picture” on page 17.  
– Use the CVBS connection instead of S-Video or ComponentVideo to connect  
yourTV to the Streamium System. For this, press and hold the green button  
(ANGLE) on the remote control for 6 seconds to reset the video settings,  
disconnect the Streamium System from the power supply and follow the  
instructions in “Using CompositeVideo (CVBS)” on page 14.  
No video signal available on  
video output jacks (CVBS, S-Video,  
Component)  
– When INTERNET or PC LINK is selected, a video signal will be available  
either on the ComponentVideo or on the CVBS and S-Video jacks.  
See “No picture or distorted picture” on page 17 to switch between  
ComponentVideo and S-Video/CVBS.  
Playback of Internet services skips or  
interrupts  
– If you share the broadband Internet access with other users, there may not be  
enough broadband Internet bandwidth available to the Streamium System.  
Media le (music, video or photo)  
does not play or in poor quality only  
– The file format of the media file may not be supported by the  
Streamium System. Play a media file with a supported file format.  
– The wireless reception is low. Change the position of your wireless  
equipment to improve the reception.  
– The media has been recorded in low quality, e. g. music files with a low  
bitrate (64 kbps).  
No connection to the Internet  
General solutions, always try first:  
– Press INTERNET again. If necessary, repeat this step several times.  
– Make sure the computers in your network connect to the Internet. If they do  
not, consult your network administrator or Internet service provider.  
The system could not connect to  
the server.appears  
– Check if your (wireless) router and your cable modem are  
connected properly to each other.  
Your Internet service provider uses a proxy. Press the green button (ANGLE)  
on the remote control to enter the proxy name and the proxy port.  
An IP address could not be obtained  
automatically.appears  
– If you use a (wireless) router, make sure “DHCP server” is enabled in the  
configuration menu of the router.  
– Press the green button (ANGLE) on the remote control to enter the  
IP settings manually.  
TheWEP key you entered has  
an invalid format.appears  
– All WEP keys must have the same format (either ASCII or  
HEX format) and the same length (ASCII: either 5 or 13 characters,  
HEX: either 10 or 26 digits).  
Cannot access Internet media after  
entering the email address  
– After entering your email address, you will get an email with instructions on  
how to create a user account. Please follow these instructions. Next, press  
INTERNET on the remote control.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Solution  
INTERNET, PC LINK:  
Streamium System freezes  
during startup  
– Press STANDBY·ON to switch off the Streamium System. Next, press  
INTERNET or PC LINK to switch it on again.  
– If the Streamium System does not react when you press STANDBY·ON,  
disconnect the Streamium System from the power supply and wait at least  
10 seconds before reconnecting the Streamium System.  
– If the Streamium System freezes during startup before you can see  
the INTERNET or PC LINK menu and if the hints above do not help,  
the Streamium System may need a reinstallation of the software:  
1 Make sure the Streamium System has access to the Internet through a  
wired connection. If necessary, connect the Streamium System to a free  
LAN port on your router (see page 24). Do not use a wireless connection.  
2 Disconnect the Streamium System from the power supply.  
3 Press and hold the red button (SUBTITLE) on the remote control while  
you reconnect the power cord to the power supply.  
4 Follow the instructions on theTV screen or on the display of the  
Streamium System to establish a connection to the Internet and to reinstall  
the software of the Streamium System.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Addendum  
MX6000i/37  
Please take the following problems/solutions into account:  
Problem  
Solution  
PC LINK: It takes about 2 minutes  
before the Streamium System  
connects to the PC  
Your PC may assign an IP address to itself automatically  
(Auto-IP).This can take some time.  
Run the Philips AutoIP utility. See the chapter below.  
(Windows operating system only)  
PC LINK:The Streamium System  
does not connect to the PC  
The PC may not get an IP address automatically.  
Run the Philips AutoIP utility. See the chapter below.  
(Windows operating system only)  
Using the Philips AutoIP utility  
Run the Philips AutoIP utility on your PC if you have a  
direct connection between the Streamium System and your  
PC (case B on page 23 or case D on page 25 of the user  
manual).  
4 Click on the adapter which you want to use for the  
communication between the PC and the Streamium System.  
5 If the status of the adapter is “DHCP only”:  
Click the “Enable AutoIP” button.  
The status changes to “DHCP/AutoIP”.  
Do not run the Philips AutoIP Utility if you have a  
wired or wireless home network using a base station,  
router or gateway (case A on page 21 or case C on  
page 24 of the user manual)  
If the status of the adapter is “DHCP/AutoIP” or  
“AutoIP”:  
Wait until the IP address changes to 169.254.x.x.  
x is a number between 0 and 255.  
1 Press PC LINK on the Streamium System.  
Next, click the “Lock AutoIP” button.  
2 Insert the Philips Media Manager CD-ROM into the  
CD-ROM drive of your PC.  
The PC is properly set up now.  
If the status of the adapter is “Static IP”:  
In this case the AutoIP utility cannot make any changes on  
your computer.  
Either change the network settings of the Windows  
operating system to “Obtain IP address automatically” and  
continue with step 4 or  
Go to the folder “Software” Tools”.  
3 Double-click the “PhilipsAutoIPutility.exe” file to start the  
AutoIP utility.  
In some cases “Auto IP” may be deactivated on your  
computer completely and you will be asked if you want  
to enable Auto IP on your PC. Click on “OK”. Please be  
aware that your PC will restart. Continue with step 2.  
A list with all network adapters found on your computer  
will appear.The list may include old adapters that were  
not properly uninstalled.  
enter a static IP on the Streamium System. For this, press  
SYSTEM MENU and select Network Network Config.  
6 Click the “Exit” button to exit the AutoIP utility.  
7 Press STANDBY·ON to switch the Streamium System to  
standby. Next, press PC LINK.The Streamium System should  
connect instantly to the PC now.  
Note:You can reverse the settings of the AutoIP utility by clicking  
again on the corresponding button.  
3103 306 1999.3  
EL6593E003 VieChr0418  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Subject to modification without notice.  
General  
Analog audio connections  
Power supply rating –––––––––––––––––––– 120V /60 Hz  
Power consumption  
Analog in (AUX IN,TV IN) ––––––– 500 mV – 2V / 22 k  
Analog out (LINE OUT) –– Stereo, 1.5V / 1 k, S/N 105 dB  
Active ––––––––––––––––––––––––––––––––– 118 W  
Standby –––––––––––––––––––––––––––––– < 0.5 W  
Dimensions (w x h x d) –––––––––––– 17.1" x 3.8" x 14.6"  
Weight –––––––––––––––––––––––––––– 8.0 kg, 17.6 lbs  
Video connections  
Video out (ComponentVideo)  
Y ––––––––––––––––––––––––––––––– 1.0Vp-p, 75 Ω  
PB, PR –––––––––––––––––––––––––––– 0.7Vp-p, 75 Ω  
Video out (S-VIDEO)  
Amplier  
Output power  
Y ––––––––––––––––––––––––––––––– 1.0Vp-p, 75 Ω  
C ––––––––––––––––––––––––––––– 0.286Vp-p, 75 Ω  
Video out (CVBS) ––––––––––––––––––––– 1.0Vp-p, 75 Ω  
Total output power –––––––––––––––––– 450 W RMS  
360 W FTC*  
Stereo mode ––––––––––––––––––––– 2 x 75 W RMS  
2 x 60 W FTC  
Digital connections  
Surround mode  
Digital Input/Output SPDIF (Sony Philips digital interface)  
In –––––––––––––––––––––––––– > 200 mVp-p / 75 Ω  
Out –––––––––––––––––––––––––– 500 mVp-p / 75 Ω  
PCM –––––––––––––––––––––––––––––– acc. IEC 60958  
Dolby Digital/DTS –––––––––– acc. IEC 60958, IEC 61937  
Audio DAC ––––––––––––––––––––––––– 24 bit /96 kHz  
Frequency Response  
Front ––––––––––––––– 2 x 75 W RMS / 60 W FTC  
Center ––––––––––––––––– 75 W RMS / 60 W FTC  
Surround –––––––––––– 2 x 75 W RMS / 60 W FTC  
Subwoofer –––––––––––––– 75 W RMS / 60 W FTC  
Total Harmonic Distortion ––––––––––– 10%, 1 kHz, 66 W  
S/N ratio (unweighted) ––––––––––––––––––––– 92 dB  
(A-weighted) –––––––––––––––––––––––––– 100 dBA  
Crosstalk (1 kHz) ––––––––––––––––––––––––– -90 dB  
44.1 kHz –––––––––––––––––––––––– 10 Hz – 20 kHz  
48 kHz ––––––––––––––––––––––––– 10 Hz – 22 kHz  
96 kHz ––––––––––––––––––––––––– 10 Hz – 44 kHz  
*
4 , 120 Hz–12.5 kHz, 10%THD  
Tuner  
Speaker and headphones connections  
Tuning range  
Front, center and rear speakers –––––––––––––––––– 4 Ω  
Subwoofers ––––––––––––––––––––––––––––––––– 8 Ω  
Headphone (6.3 mm, 8–600 ) –––– 2.8V EMF, Ri = 80 Ω  
FM ––––––––––––––––––––––––– 87.5 MHz–108 Mhz  
AM ––––––––––––––––––––––––– 530 kHz–1700 kHz  
DVD  
Antenna connections  
Disc diameter –––––––––––––––––––––––– 12 cm / 8 cm  
Video Decoding –––––––––––––––––– MPEG-2 / MPEG-1  
Video DAC –––––––––––––––––––––––– 9 bit, 5 channels  
Signal system –––––––––––––––––––––––––––––– NTSC  
Video format –––––––––––––––––––––––––––– 4:3 / 16:9  
Video S/N ––––––––––––––––––––––– 56 dB (minimum)  
Supported disc formats –––––– DVD, DVD+R, DVD+RW,  
(Super)Video CD,  
FM antenna –––––––––––––––––––––––––––––––– 75 Ω  
AM antenna ––––––––––––––––––––––––––––––– 300 Ω  
Speakers  
Front and rear speakers  
System –––––––––––––––– 2 way shielded, Closed Box  
Impedance –––––––––––––––––––––––––––––––– 4 Ω  
Speaker drivers –––––– 2 x 3" woofers, 1 x 134" tweeter  
Dimensions (w x h x d) ––––––––––– 3.7" x 11.0" x 2.8"  
Center speaker  
Audio CD, CD-R, CD-RW,  
MP3-CD (ISO 9660)  
System –––––––––––––––– 2 way shielded, Closed Box  
Impedance –––––––––––––––––––––––––––––––– 4 Ω  
Speaker drivers –––––– 4 x 2" woofers, 1 x 134" tweeter  
Dimensions (w x h x d) ––––––––––– 17.1" x 2.9" x 2.6"  
Subwoofer  
INTERNET and PC LINK  
Ethernet –––––––––––––––––– IEEE 802.3, 10/100 Base-T  
Wireless –––––––––––––––– Wi-Fi Certified, IEEE 802.11g  
Supported media formats (at the time of printing)  
Music –––––––––––––––––– MP3 and MP3pro streams,  
32–320 kbit/sec,  
System ––––––––––––––––––––––––––––– Bass Reflex  
Impedance –––––––––––––––––––––––––––––––– 8 Ω  
Speaker driver –––––––––––––––––––––––– 4" woofer  
Dimensions base (w x h) –––––––––––––––– 9.4" x 1.2"  
Dimensions tube (w x h) ––––––––––––––– 4.5" x 37.9"  
variable bit rate  
Pictures ––––––––––––––––– JPEG, JPEG2000, .bmp, .gif  
Video ––––––––––––––––– MPEG 1, MPEG 2, MPEG 4,  
DivX 4.0/5.03  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITEDWARRANTY  
AUDIO SYSTEM  
OneYear Free Labor  
OneYear Free Service on Parts  
This product must be carried in for repair.  
WHO IS COVERED?  
You must have proof of purchase to receive warranty service.A sales  
BEFORE REQUESTING SERVICE...  
Please check your owner's manual for assistance. If you have additional  
receipt or other document showing that you purchased the product is questions, call us at 1-800-531-0039.  
considered proof of purchase.  
TO GETWARRANTY SERVICE IN U.S.A.,  
WHAT IS COVERED?  
PUERTO RICO, OR U.S. VIRGIN ISLANDS...  
Take the product to a Philips factory service center (see enclosed list)  
or authorized service center for repair.When the product has been  
repaired, you must pick up the unit at the center. Centers may keep  
defective parts. (In U.S.A., Puerto Rico, and U.S.Virgin Islands, all  
implied warranties, including implied warranties of merchantability and  
tness for a particular purpose, are limited in duration to the duration  
of this express warranty. But, because some states do not allow  
limitations on how long an implied warranty may last, this limitation  
may not apply to you.)  
Warranty coverage begins the day you buy your product. For one year  
thereafter, all parts will be repaired or replaced, and labor is free.After  
one year from the day of purchase, you pay for the replacement or  
repair of all parts, and for all labor charges.  
All parts, including repaired and replaced parts, are covered only for  
the original warranty period.When the warranty on the product  
expires, the warranty on all replaced and repaired parts also expires.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
labor charges for installation or setup of the product, adjustment  
of customer controls on the product, and installation or repair of  
antenna systems outside of the product.  
product repair and/or part replacement because of misuse,  
accident, unauthorized repair or other cause not within the  
control of Philips.  
reception problems caused by signal conditions or cable or  
antenna systems outside the unit.  
a product that requires modication or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modications.  
TO GETWARRANTY SERVICE IN CANADA...  
Please contact Philips at:  
1-800-661-6162 (French Speaking)  
1-800-531-0039 (English or Spanish Speaking)  
(In Canada, this warranty is given in lieu of all other warranties. No  
other warranties are expressed or implied, including any implied  
warranties of merchantability or tness for a particular purpose.  
Philips is not liable under any circumstances for any direct, indirect,  
special, incidental or consequential damages, howsoever incurred, even  
if notied of the possibility of such damages.)  
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or  
consequential damages, so the above exclusion may not apply to  
you.This includes, but is not limited to, prerecorded material,  
whether copyrighted or not copyrighted.)  
REMEMBER...  
Please record below the model and serial numbers found on the  
product.Also, please ll out and mail your warranty registration card  
promptly. It will be easier for us to notify you if necessary.  
a product that is used for commercial or institutional purposes.  
MODEL # ________________________________________  
SERIAL # ________________________________________  
WHERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is  
ofcially distributed by Philips. In countries where Philips does not  
distribute the product, the local Philips service organization will  
attempt to provide service (although there may be a delay if the  
appropriate spare parts and technical manual(s) are not readily  
available).  
MAKE SUREYOU KEEP...  
Please keep your sales receipt or other document showing proof of  
purchase.Attach it to this owners manual and keep both nearby.Also  
keep the original box and packing material in case you need to return  
your product.  
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.  
Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171  
EL4965E007 / 8-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick use guide  
MX6000i  
1
Insert batteries  
2
ConnectTV  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
Pr/Cr  
AUDIO  
OUT  
Pb/Cb  
Y
VIDEO IN  
COMPONENT  
V
I
D
E
O
I
N
S-VIDEO  
IN  
AUDIO  
OUT  
Pr/Cr  
Pb/Cb  
Y
V
I
D
E
O
I
N
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
ANTENNA  
AM  
DIGITAL  
OUT  
L
FM  
SURR  
RIGHT  
SUB-W  
RIGHT  
DIGITAL  
IN  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
ON  
COMPONENT  
OFF  
VIDEO OUT  
Connect the composite video input jack on theTV (labelled A/V In,Video In, Composite) to  
VIDEO CVBS on the Streamium System with the supplied composite video cable (yellow).  
For Component or S-Video connections, see page 14 of the user´s manual.  
Connect the audio output jacks on theTV toTV IN (L/R) on the Streamium System with the  
supplied RCA-style audio cable (white and red).  
3
Connect speakers and antenna  
Match the colors of the speaker cables and of the speaker jacks!  
centre  
white (red) purple  
front L,  
front R,  
subwoofer  
subwoofer  
rear L  
rear R  
1 Connect the speaker 2 Mount the 2 front 3 Mount the 2 mini  
4 Position the speakers.  
cables to the base of  
the subwoofers.  
speakers (white,  
red jack) onto the  
2 subwoofers.  
speaker stands onto  
the 2 rear speakers  
(blue, grey jack) and  
connect the  
corresponding  
speaker cables.  
ETHERNET  
FRONT  
LEFT  
FRONT  
RIGHT  
CENTRE  
CVBS  
SURR  
LEFT  
SUB-W  
LEFT  
ANTENNA  
AM  
DIGITAL  
OUT  
L
FM  
SURR  
RIGHT  
SUB-W  
RIGHT  
DIGITAL  
IN  
P-SCAN  
R
AUX IN  
TV IN  
AUDIO  
LINE OUT  
S
-
VIDEO  
ON  
OFF  
VIDEO OUT  
COMPONENT  
5 Connect the speaker cables to the Streamium System.  
7 After making all other connections connect  
the power cord to MAINS ~ on the Streamium  
System and to the power outlet.  
6 Connect the FM and the AM antenna.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Install the tuner  
1 PressTUNER on the remote control.  
5
Switch on theTV  
1 Switch on yourTV.  
6
Install the Philips Media Manager  
With the installation of the Philips Media Manager software  
on your computer, you can make the media files on your  
computer available to the Streamium System.  
2 Press and hold  
VIEW FAVORITES on the remote  
control for 5 seconds.  
AUTO PROGRAM FAVORITE STATIONS?is displayed.  
2 Press AUX on the remote control of the Streamium  
System.  
1 Download the latest version of the Philips Media Manager  
software at “My.Philips.com” or insert the supplied CD-ROM  
into the CD-ROM drive of your computer.  
3 Set theTV to the correct audio/video channel for the  
Streamium System:A/V IN,AUX, EXT1, 2, …  
The Philips Streamium startup screen will appear on  
theTV screen.  
3 Press the red button (SUBTITLE) on the remote control to  
start the installation of radio stations.  
2 Double-click the “PMMSetup.exe” file to install the Philips  
Media Manager software on your computer(s). During the  
installation you will be asked which media files should be  
added to the Philips Media Manager.  
It may take several minutes to search and store the radio  
stations.  
If you have any problems with the picture quality,  
please read page 17 of the user´s manual.  
7
Option A  
or  
Option B  
You have  
broadband Internet  
You have  
– a computer with a free USB port (USB 2.0 recommended)  
– Windows 98 SE or later  
– broadband Internet  
m
pictur  
video  
usic  
– a wireless base station (not included)  
– computer connected to the wireless network  
PC:Windows 98 SE or later,  
es  
With the installation of the supplied wireless USB adapter on your  
computer you get a wireless connection to the Streamium System.  
Then you can access the media files of your computer with your  
Streamium Home Entertainment System.  
Apple Macintosh: Mac OS 10.1.5 or higher  
m
pictur  
video  
usic  
es  
+
supplied wireless  
USB adapter  
First, make sure all computers of your network connect  
to the Internet and to each other.  
Play online music, picture and video services with the  
Streamium System  
Install the supplied wireless USB adapter on your  
computer  
1 Press INTERNET on the remote control.  
DVD  
INTERNET  
TUNER  
AUX  
PC LINK  
1 Insert the installation disc of the USB adapter into the disc drive of your  
You will be asked to enter your email address.  
computer  
computer.The installation guide on the CD-ROM will start automatically.  
TV  
2 Use the remote control to enter your email address and press 2OK to confirm.  
2 Follow the on-screen instructions on the computer. Connect the wireless  
USB adapter to the free USB port on your computer when the installation guide  
asks you to do so.  
(UN) MARK  
VIEW  
FAVORITES  
Example: Press O twice for “@”.To delete a character, press 1.  
ANGLE  
ZOOM  
SUBTITLE  
AUDIO  
3 You will receive an email with instructions on how to create your user account  
SYSTEM  
MENU  
DISC  
MENU  
at “My.Philips.com”.  
computer  
4 After creating your user account, press INTERNET on the remote control to  
Play music, picture and video from your computer with  
the Streamium System  
DVD  
INTERNET  
TUNER  
PC LINK  
access online media services.  
TV  
AUX  
RETURN  
RESUME  
1 Press PC LINK on the remote control.  
(UN) MARK  
ANGLE  
VIEW  
-
The computer name will appear on theTV screen.  
DEF  
MNO  
Play music, picture and video from your computer with  
the Streamium System  
ABC  
JKL  
TUV  
.@  
FAVORITES  
ZOOM  
SUBTITLE  
AUDIO  
GHI  
2 Press 2OK to access music, pictures and video on your computer.  
1 Press PC LINK on the remote control.  
SYSTEM  
MENU  
DISC  
MENU  
PQRS  
SOUND  
WXYZ  
The available computer names will appear on theTV screen.  
SURROUND  
If you have trouble connecting to the computer, press PC LINK again.  
See page 23 of the user´s manual for additional help.  
2 Select a computer and press 2OK to access music, pictures and video on the  
SHUFFLE  
RECENT  
INFO !  
computer.  
If you have trouble connecting to the Internet or to your computers,  
press INTERNET or PC LINK again. See pages 21–22 in the user´s manual  
for additional help.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Select and play media  
SYSTEM  
MENU  
DISC  
MENU  
SYSTEM  
MENU  
DISC  
MENU  
RETURN  
RESUME  
RETURN  
RESUME  
1 Press 3 or 4 to move up or down  
3 Repeat step 1 and 2 to navigate to  
the desired playable item (Internet  
radio station, movie, album, track, …)  
4 Press 2OK to play the playable item.  
in the menu.  
0
To go back to the previous (left)  
2 Press 2 to enter the menu to the  
menu, press 1.  
right.  
0
To stop playback, press 9.  
9
Play a disc  
SYSTEM  
MENU  
DISC  
MENU  
DVD  
INTERNET PC LINK TUNER  
AUX  
TV  
RETURN  
RESUME  
(UN) MARK  
FAVORITES  
VIEW  
1 Press DVD on the remote control.  
2 Press DISC 1 (OPEN/CLOSE /) to  
5 Press 2OK to start playback.  
open tray 1.  
Some discs will start automatically.  
3 Insert a disc into tray 1.  
0
To skip to previous or following  
chapters/tracks, press S or T  
repeatedly.  
4 Press DISC 1 (OPEN/CLOSE /) to  
close tray 1.  
4
3103 306 1988.2  
EL6572E002 VieChr0411  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA  
Knoxville,Tennessee 37914-1810, U.S.A.  
W
Printed in China  
CLASS 1  
LASER PRODUCT  
3103 306 1975.3  
IB 8459E003 /VieChr0415  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Paxar Printer TC6037EM User Manual
Perle Systems MP3 Player Accessories 5500174 11 User Manual
Philips Car Video System 32PF7321 12 User Manual
Philips TV Antenna 40PFL9606 User Manual
Philips Video Gaming Accessories SGP6026BB 27 User Manual
Polaris Offroad Vehicle 120 Youth User Manual
Pontiac Automobile 2008 grand prix User Manual
Poulan Snow Blower 415332 User Manual
Poulan Trimmer S31BC User Manual
PVI Industries Water Heater 20 N 119A MXS User Manual