DVD HOMETHEATRE SYSTEM
HTS3100
User Manual
6
46
Manuel D’utilisation
Manual del usuario
Benutzerhandbuch
Gebruikershandleiding
84
122
160
Download from Www.Somanuals.com. All Manuals Search And Download.
DK
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO BEAM
Advarsel: Usynlig laserstråling ved
åbning når sikkerhedsafbrydere er ude
af funktion. Undgå utsættelse for
stråling.
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING VED
ÅBNING UNDGÅ UDSÆTTELSE FOR
STRÅLING
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen
fra nettet. Den indbyggede netdel er
derfor tilsluttet til lysnettet så længe
netstikket sidder i stikkontakten.
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING
NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA
EJ STRÅLEN
S
Klass 1 laseraparat
VARO!
Varning! Om apparaten används på
annat sätt än i denna bruksanvisning
specificerats, kan användaren utsättas
för osynlig laserstrålning, som
överskrider gränsen för laserklass 1.
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE
JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE.
ÄLÄ KATSO SÄTEESEEN
VORSICHT
SICHTBARE UND UNSICHTBARE
LASERSTRAHLUNG WENN ABDECKUNG
GEÖFFNET NICHT DEM STRAHL
AUSSETZEN
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge
ATTENTION
stickproppen sitter i vägguttaget.
RAYONNEMENT LASER VISIBLE ET
INVISIBLE EN CAS D’OUVERTURE
EXPOSITION DANGEREUSE AU FAISCEAU
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla
kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei
saa olla alttiina tippu-ja roiskevedelle.
This product complies with the radio
interference requirements of the
European Community.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu
verkko-osa on kytkettynä
sähköverkkoon aina silloin, kun pistoke
on pistorasiassa.
This product complies with
the requirements of the
following directives and
guidelines: 73/23/EEC +
89/336/EEC + 93/68/EEC
LASER
Type
Semiconductor laser
GaAIAs
Wave length
Output Power
Beam divergence
650 - 660 nm (DVD)
784 - 796 nm (CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degrees
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Manufactured under license from
Dolby Laboratories, “Dolby”, “Pro
Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help
prevent potential negative consequences for the environment and human health.
Se débarrasser de votre produit usagé (Français)
Votre produit est conçu et fabriqué avec des matériaux et des
composants de haute qualité, qui peuvent être recyclés et utilisés de
nouveau.
Lorsque ce symbole d'une poubelle à roue barrée est attaché à un
produit, cela signifie que le produit est couvert par la Directive
Européenne 2002/96/EC.
Veuillez vous informer du système local de séparation des déchets
électriques et électroniques.
Veuillez agir selon les règles locales et ne pas jeter vos produits usagés avec les déchets
domestiques usuels. Jeter correctement votre produit usagé aidera à prévenir les
conséquences négatives potentielles contre l'environnement et la santé humaine.
Manufactured under license from
Digital Theater Systems, Inc. U.S. Pat.
Noís. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents
issued and pending. “DTS” and “DTS
Digital Surround” are registered
trademarks of Digital Theater
Cómo deshacerse del producto usado (Español)
Su producto ha sido diseñado y fabricado con materiales y componentes de
alta calidad, que pueden ser reciclados y reutilizados.
Cuando vea este símbolo de una papelera con ruedas tachada junto a un
producto, esto significa que el producto está bajo la Directiva Europea
2002/96/EC
Deberá informarse sobre el sistema de reciclaje local separado para
productos eléctricos y electrónicos.
Siga las normas locales y no se deshaga de los productos usados tirándolos en la basura
normal de su hogar. El reciclaje correcto de su producto usado ayudará a evitar
consecuencias negativas para el medio ambiente y la saludde las persona.
Systems, Inc. Copyright 1996, 2003
Digital Inc. All Rights Reserved.
Entsorgung Ihres Altgerätes (Deutsch)
Ihr Produkt ist aus hochqualitativen Materialien und Bestandteilen hergestellt,
die dem Recycling zugeführt und wiederverwertet werden können.
Falls dieses Symbol eines durchgestrichenen Müllcontainers auf Rollen auf
diesem Produkt angebracht ist, bedeutet dies, dass es von der Europäischen
Richtlinie 2002/96/EG erfasst wird.
Bitte informieren Sie sich über die örtlichen Sammelstellen für Elektroprodukte
und elektronische Geräte.
Bitte beachten Sie die lokalenVorschriften und entsorgen Sie Ihre Altgeräte nicht mit dem
normalen Haushaltsmüll. Die korrekte Entsorgung Ihres Altgerätes ist ein Beitrag zur
Vermeidung möglicher negativer Folgen für die Umwelt und die menschliche Gesundhei.
Wegwerpen van uw afgedankt apparaat (Nederlands)
Uw apparaat werd ontworpen met en vervaardigd uit onderdelen en
materialen van superieure kwaliteit, die gerecycleerd en opnieuw gebruikt
kunnen worden.
Wanneer het symbool van een doorstreepte vuilnisemmer op wielen op
een product is bevestigd, betekent dit dat het product conform is de
Europese Richtlijn 2002/96/EC
DivX Ultra Certified products: “DivX,
DivX Ultra Certified, and associated
logos are trademarks of DivX, Inc. and
are used under license.
Gelieve u te informeren in verband met het plaatselijke inzamelingsysteem
voor elektrische en elektronische apparaten.
Gelieve u te houden aan de plaatselijke reglementering en apparaten niet met het gewone
huisvuil mee te geven. Door afgedankte apparaten op een correcte manier weg te werpen
helpt u mogelijke negatieve gevolgen voor het milieu en de gezondheid te voorkomen.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English------------------------------------ 6
Français----------------------------------46
Español ----------------------------------84
Deutsch-------------------------------- 122
Nederlands---------------------------- 160
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
General
General Information ........................................................................................................8
Setup precautions.................................................................................................................................................8
Accessories supplied ...........................................................................................................................................8
Cleaning discs........................................................................................................................................................8
About recycling.....................................................................................................................................................8
Product Overview
Main Unit ...........................................................................................................................9
Remote Control.........................................................................................................10-12
Using the remote control................................................................................................................................12
Connections
Basic Connections .....................................................................................................13-15
Step 1 : Placing the speakers...........................................................................................................................13
Step 2 : Connecting to TV and the speakers system...............................................................................14
Step 3 : Connecting the FM/MW antennas.................................................................................................15
Step 4 : Connecting the power cord ............................................................................................................15
Optional Connections.................................................................................................... 16
Connecting audio from an analogue audio/video device.........................................................................16
Basic Setup
Getting Started ........................................................................................................17-21
Step 1: Turning on the DVD system .............................................................................................................17
Turning off to Eco Power standby mode..............................................................................................17
Step 2: Finding the correct viewing channel...............................................................................................17
Step 3: Setting language preferences............................................................................................................18
On-screen display (OSD) language........................................................................................................18
Audio, Subtitle and Menu language for DVD playback...............................................................18-19
Step 4: Setting the TV.......................................................................................................................................19
Selecting the matching colour system .......................................................................................... 19-20
Setting the TV Display.............................................................................................................................. 20
Step 5: Setting the speakers’ channels .........................................................................................................21
Disc Playback
Disc Operations ........................................................................................................22-29
Playable discs ...................................................................................................................................................... 22
Playing a disc....................................................................................................................................................... 22
Basic playback controls.................................................................................................................................... 23
Selecting various repeat/shuffle functions ................................................................................................. 23
Programming disc tracks..................................................................................................................................24
Other playback features for video discs (DVD/VCD/SVCD) ..............................................................24
Using the Disc Menu..................................................................................................................................24
Viewing playback information................................................................................................................. 25
Resuming playback from the last stopped point ............................................................................... 25
Zooming in................................................................................................................................................... 25
Changing subtitle language (DVD only)............................................................................................... 25
Changing sound track language.............................................................................................................. 26
Selecting camera angles............................................................................................................................ 26
Playback Control (VCD only)................................................................................................................. 26
Preview function (VCD/SVCD only).................................................................................................... 26
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Playing an MP3/ JPEG//Window Media Audio disc ..................................................................................27
Playing a JPEG image file (slide show) ......................................................................................................... 28
Preview function......................................................................................................................................... 28
Zoom picture ............................................................................................................................................. 28
Rotating/flipping the picture................................................................................................................... 28
Playing MP3 music and JPEG pictures simultaneously .............................................................................29
Playing a DivX disc .............................................................................................................................................29
Setup Options
DVD Setup Menu Options...................................................................................... 30-35
Accessing the DVD setup menu.................................................................................................................... 30
General Setup Page............................................................................................................................................31
Audio Setup Page................................................................................................................................................32
Video Setup Page................................................................................................................................................33
Preference Setup Page...............................................................................................................................34-35
Radio Tuning
Tuner Operations ..................................................................................................... 36-37
Tuning to radio stations................................................................................................................................... 36
Presetting radio stations................................................................................................................................. 36
Using auto install..................................................................................................................................36-37
Using automatic preset..............................................................................................................................37
Using manual preset...................................................................................................................................37
Selecting a preset radio station......................................................................................................................37
Deleting a preset radio station.......................................................................................................................37
Others
Sound and Volume Controls .........................................................................................38
Selecting surround sound................................................................................................................................ 38
Selecting digital sound effects........................................................................................................................ 38
Volume control.................................................................................................................................................. 38
Other Features ...............................................................................................................39
Controlling ‘Philips’ TV with the remote control.....................................................................................39
Software upgrades.............................................................................................................................................39
Troubleshooting........................................................................................................ 40-41
Glossary ..................................................................................................................... 42-43
Specifications ..................................................................................................................44
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
CAUTION!
Accessories supplied
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
– 1 passive subwoofer
– 4 satellite speakers
– 1 centre speaker
– 1 remote control with batteries
– 1 scart cable
– 1 FM wire antenna
– 1 MW loop antenna
– Quick Start Guide
Setup precautions
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
Cleaning discs
– Do not put anything under the set
(e.g., CDs, magazines).
– Install this unit near the AC outlet
where the AC power plug can be easily
reached.
Some problems occur (frozen picture,
sound disruptions, picture distortions)
because the disc inside the unit is dirty.
To avoid these problems, discs should be
cleaned on a regular basis.
Space for ventilation
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the centre
to the edge in a straight line.
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4”)
clearance from the rear and the top of
the set and 5cm (2”) from the left and
right to prevent overheating.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for discs.
5cm (2.3")
10cm (4.5")
10cm (4.5")
About recycling
These operating instructions have been
printed on non-polluting paper. The
electronic equipment contains a large
number of materials that can be recycled.
If you are disposing of an old machine,
please take it to a recycling centre.
Please observe the local regulations
regarding disposal of packaging materials,
exhausted batteries and old equipment.
5cm (2.3")
Avoid high temperatures, moisture,
water and dust
– Apparatus must not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (e.g., liquid filled
objects, lighted candles).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Unit
1
3
4
7
5
6
2
f SOURCE
a STANDBY ON 2
–
Selects the relevant active source mode:
DISC, TUNER (FM/MW), TV or AUX.
–
Turns on the system or turns off to Eco
Power standby mode.
g VOL
Adjusts the volume level.
b Disc tray
–
c OPEN CLOSE ç
–
Opens/ closes the disc tray.
d System display panel
e u (PLAY PAUSE)
–
–
DISC: starts/pauses playback.
TUNER: starts auto tuner installation for
first time setup.
Ç (STOP)
–
–
–
Exits an operation.
DISC: stops playback.
TUNER: hold down this button to erase
the current preset radio station.
. >
–
–
DISC: selects a track or hold down this
button to search backward/forward.
TUNER: selects a preset radio station.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
c ZOOM
–
Enlarges a picture on the TV screen.
d AUDIO
1
–
Selects an audio language (DVD) or an
audio channel (CD).
2
3
4
e SETUP
–
Enters or exits the system setup menu.
5
f DISPLAY
–
Displays the current status or disc
information.
6
g PLAY É
–
DISC: starts playback.
7
8
h STOP Ç
–
–
–
Exits an operation.
DISC: stops playback.
DISC: hold down this button to open and
close the disc tray.
9
–
TUNER: hold down this button to erase
the current preset radio station.
10
i TV VOL +-
Adjusts TV volume (Philips TV only).
11
12
–
j Numeric Keypad (0-9)
–
–
Enters a track/title number of the disc.
Enters a number of a preset radio station.
k REPEAT
Selects various repeat modes; turns off
repeat mode.
–
l VOCAL / KARAOKE
Not functional for this model.
–
a 2
–
Turns off to Eco Power standby mode.
b Source buttons
–
DISC: switches to DISC mode.
TUNER: toggles between FM and MW
band.
TV: switches to TV mode.
The sound from the TV will output
through the connected speakers system.
AUX/DI: switches to the external device
which is connected to this DVD system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
m SUBTITLE
Selects a DVD subtitle language.
–
n ANGLE
Selects a DVD disc camera angle (if
available).
–
13
14
o DISC MENU
–
For DVD, enter or exit disc contents
menu.
15
–
For VCD/SVCD, enter digest menu.
16
17
p W X S T
–
–
–
DISC: selects movement direction in the
menu.
TUNER: press left or right to tune the
radio frequency.
TUNER: press up or down to start auto
search.
18
19
20
21
22
q OK
–
Confirms a selection.
r RETURN/TITLE
–
–
For DVD, go back to the previous menu.
For VCD version 2.0 only;
In stop mode, turn on/off playback
control (PBC) mode.
During playback, display the disc title
menu or return to the main menu.
23
24
25
s . >
–
–
–
DISC: hold down this button for fast
forward and backward search.
TV: selects previous/next channel (Philips
TV only).
TUNER: selects a preset radio station.
w PROGRAM
t PAUSE Å
DISC: pauses playback.
–
–
DISC: starts programming.
TUNER: hold down this button to start
automatic/ manual preset programming.
–
u VOL +-
Adjusts the volume level.
–
x SURR.
Selects multi-channel surround or
stereo mode.
–
v MUTE
Mutes or restores the volume.
–
y SOUND
–
Selects a predefined sound effect.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
CAUTION!
Using the remote control
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D Point the remote control directly at the
remote sensor (iR) on the front panel.
E Select the source you wish to control by
pressing the DISC, TUNER, TV or
AUX/DI button on the remote control.
F Then select the desired function (for
example ., >).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Connections
Helpful Hints:
Step 1: Placing the speakers
– The placement diagram shown here is only
a guideline that will provide great system
performance. You may find other placement
choices that are more suitable for your room
layout and provide the sound experience you
enjoy.
The Philips Home Theatre System is
simple to install. However, proper
system placement is critical to ensure an
optimum sound experience.
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– The rear speakers are labeled as REAR
LEFT or REAR RIGHT.
A Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
– The front speakers are labeled as
FRONT LEFT or FRONT RIGHT.
B Place the centre speaker above the TV or
the DVD system so that the centre
channel’s sound is localised.
C Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
D Place the subwoofer at the corner of the
room. Keep at least one metre away
from the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Connections (continued)
SUBWOOFER
FRONT
LEFT
FRONT
RIGHT
A
B
CENTER
REAR LEFT
REAR RIGHT
Helpful Hints:
Step 2: Connecting toTV and
the speakers system
– To prevent unwanted noise, do not place
the rear speakers too close to the DVD
system, AC power adapter, TV or any other
radiation sources.
– To hear the TV channels through this DVD
system, press the TV button on the remote
control when watching the TV programmes.
IMPORTANT!
Connect the DVD system directly
to the TV.
A Use the scart cable to connect the
SCART socket on the DVD system to
the corresponding SCART input socket
on the TV.
B Connect the supplied speakers and
subwoofer to the matching speaker
sockets on the DVD main system.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Connections (continued)
fix the claw
into the slot
>
TV
FM antenna
2
1
MW
antenna
L
L
R
R
Step 3: Connecting the FM/
MW antennas
Step 4: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
The Eco Power LED on the DVD system
will light up. Never make or change any
connections with the power turned on.
A Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
B Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
fix its ends to the wall.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identification and
supply ratings.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Connections
Connecting audio from an
analogue audio/video device
You can connect the audio output from
an analogue audio/video device (e.g. VCR,
Cable/Satellite Box or TV) to this Home
Theatre Audio System in order to enjoy
the multi-channel surround sound
capabilities
Use an audio cable (red/white - not
supplied) to connect the AUX IN
sockets on this DVD system to the
AUDIO OUT sockets on an analogue
audio/video device.
ꢀ
To listen to the sound, press AUX/DI as
the sound source that you want to play.
Helpful Hint:
– To see the picture of the connected video
device (e.g. VCR), connect the VIDEO OUT
socket of the device to the VIDEO IN socket
of the TV, and select the correct input
channel on the TV.
TIPS: Refer to the respective connected device’s user manual for other possible connections.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Turning on the DVD
system
Step 2: Finding the correct
viewing channel
A Press STANDBY ON (2).
Before you start ...
Make sure you have completed all the
necessary connections before proceeding.
B Press the SOURCE button on the front
panel repeatedly to select :
DISC ¤ FM ¤ MW ¤ TV ¤ AUX
¤ DISC ....
A Press SOURCE button until “DISC”
appears on the display panel.
B Turn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
ꢁYou may go to Channel 1 on your TV,
then press the Channel Down button on
your TV’s remote control until you see
the Video In channel.
Or
ꢁYou may press °button repeatedly
on your TV’s remote control.
Press DISC, TUNER, TV or AUX/DI
on the remote control.
ꢀ
ꢁUsually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
Turning off to Eco Power standby
mode
Press STANDBY ON (2).
ꢁThe display screen will turn off.
ꢀ
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
Audio, Subtitle and Menu language
for DVD playback
Step 3: Setting language
preferences
You can select your preferred language
settings for DVD playback. If the
selected language is recorded on the
DVD disc, the DVD system will
automatically play the disc in that
language. Otherwise, the disc’s default
language will be used instead.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
A Press Çtwice to stop playback (if any),
The OSD (On-Screen Display) language
for this DVD system will remain as you
have set it, regardless of the changes
made to the DVD disc language.
then press SETUP.
B Press X repeatedly to select
{ Preference Page }.
C Use ST keys to highlight one of the
A In ‘DISC’ mode, press SETUP on the
remote control.
options below, then press X.
ꢁ{ General Setup Page } appears.
B Use ST keys to highlight { OSD
Preference Page
Language }, then press X.
Audio
Subtitle
Disc Menu
PBC
MP3/JPEG Nav
Password
DivX Subtitle
Default
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
DivX(R) VOD Code
English
Dansk
Deutsch
Espanõl
{ Audio }
Selects the preferred audio language for
DVD playback.
C Use ST keys to select a language and
{ Subtitle }
press OK to confirm.
Selects the preferred subtitle language for
DVD playback.
{ Disc Menu }
Selects the preferred disc menu language
for DVD playback.
D Use ST keys to select a language and
press OK to confirm.
TIPS: Press W to go back to the previous menu item. Press SETUP to exit the menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
If the language you want is not
available in the list, select { Others }.
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code ‘XXXX’ (see last page) and
press OK to confirm.
Step 4: Setting theTV
Selecting the matching colour
system
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
E Repeat steps C ~ D for other settings.
Helpful Hints:
– During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control. However, this does not
change the default settings you have made
here.
– For some DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu.
A In ‘DISC’ mode, press SETUP on the
remote control.
B Press X repeatedly to select { Video
Setup Page }.
C Press T to highlight { TV Type }, then
press X.
Video Setup Page
TV Type
PAL
TV Display
Picture Setting
NTSC
Multi
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will
be in accordance with the video signal of
the disc.
TIPS: The underlined option is the factory default setting.
Press W to go back to the previous menu item. Press SETUP to exit the menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
D Select one of the options and press OK
to confirm.
Setting theTV Display
Set the aspect ratio of the DVD system
according to the TV type you have
connected. The format you select must
be available on the disc. If it is not, the
setting for TV display will not affect the
picture during playback.
ꢁFollow the instructions shown on the
TV to confirm the selection (if any).
ꢁIf a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
A In ‘DISC’ mode, press SETUP on the
remote control.
B Press X repeatedly to select { Video
Setup Page }.
C Press T to highlight { TV Display },
then press X.
Video Setup Page
TV Type
TV Display
4:3 Pan Scan
Picture Setting
4:3 Letter Box
16:9 Wide Screen
{ 4:3 Pan Scan }
Select this if you have a
conventional TV and
want both sides of the
picture to be trimmed or formatted
to fit your TV screen.
{ 4:3 Letter Box }
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV screen will be
displayed.
{ 16:9 Wide Screen }
Select this if you have a
wide-screen TV.
D Select one of the options and press OK
to confirm.
TIPS: The underlined option is the factory default setting.
Press W to go back to the previous menu item. Press SETUP to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started (continued)
E Use ST keys to highlight { Speakers
Step 5: Setting the speakers’
channels
Delay }, then press
.
X
Audio Setup Page
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Speakers Distance Setup
Center
0ms
Rear Left
Rear Right
0ms
0ms
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
F Use W X keys to set the delay times (0
ms ~ 15 ms) for centre and rear speakers
that best suit your surround sound
needs.
A In ‘DISC’ mode, press SETUP on the
remote control.
G Press OK to confirm.
B Press X repeatedly to select { Audio
Helpful Hints:
Setup Page }.
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
C Press T to highlight { Speakers
Volume }, then press
.
X
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD UpsamplSinpgeakers Level Setup
Front Left
Front Right
0dB
0dB
0dB
0dB
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
D Use W X keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to confirm.
TIPS: Press W to go back to the previous menu item. Press SETUP to exit the menu.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
Playable discs
– If the inhibit icon (ø or X) appears
on the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– Do not put any objects other than
discs on the disc tray. Doing so may
cause the disc player to malfunction.
Your DVD home theatre system will
play:
Playing a disc
– Digital Versatile Discs (DVDs)
– Video CDs (VCDs)
A Press SOURCE repeatedly until “DISC”
appears on the display panel (or press
DISC on the remote control).
– Super Video CDs (SVCDs)
– Finalised DVD+Recordable (DVD R),
DVD+Rewritable (DVD RW)
– Audio Compact Discs (CDs)
– MP3/ Windows Media™ Audio discs,
picture (Kodak, JPEG) files on
CD-R(W)
B Turn on the TV to the Video In channel
for the DVD system (e.g. ‘EXT’, ‘0’, ‘AV’).
ꢁYou should see the blue DVD
background screen on the TV.
C Press OPEN CLOSE çto open the
disc tray and load a disc, then press the
same button again to close the disc tray.
ꢁMake sure the disc label is facing up.
For double-sided discs, load the side
which you want to play facing up.
–
ISO 9660/UDF format
–
JPEG resolution support up to
3072 x 2048
–
–
Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
Supported Bit-rates : 32~256 (kbps),
variable bit rates (average 128 kbps)
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
ꢀ
ꢂ
– DivX files on CD-R(W)/DVD+R(W):
–
DivX 3/4/5/6, DivX Ultra
–
Supports QPEL (Quarter Pixel).
D Playback will start automatically.
ꢁSee the following pages for more
playback options and features.
Region Codes for DVD discs
DVD discs and players are designed with
regional restrictions. Before playing a disc,
make sure the disc is for the same region
as your player. The regional code for this
DVD system is indicated at the rear panel.
Helpful Hint:
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.
TIPS: Some discs cannot be played on this player due to the configuration and characteristics of the
disc, or due to the condition of recording and authoring software that was used.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Basic playback controls
Selecting various repeat/
shuffle functions
Pausing playback
ꢀDuring playback, press u (or Åon
the remote control).
While playing a disc, press REPEAT on
the remote control repeatedly to choose
a repeat play mode.
ꢀ
ꢁWhile in pause mode, you can press
Årepeatedly to view the next still
picture (for video playback only).
ꢁTo resume playback, press u (or
PLAY X on the remote control).
DVD
ꢀ RPT ONE (repeat chapter)
ꢀ RPT TT (repeat title)
ꢀ SHUFFLE (random play)
ꢀ RPT SHF (repeat random play)
ꢀ RPT OFF (exit repeat mode)
Selecting another track/chapter
Press ./ > or use the numeric
keypad (0-9) to key in a track/chapter
number.
ꢁIf the repeat track mode is active, press
. again to replay the same track/
chapter.
ꢀ
ꢀ
VCD/SVCD/CD
ꢀ RPT ONE (repeat track)
ꢀ RPT ALL (repeat disc)
ꢀ SHUFFLE (random play)
ꢀ RPT SHF (repeat random play)
ꢀ RPT OFF (exit repeat mode)
Searching backward/forward
Hold down ./ >.
ꢁWhile searching, press ./ >
repeatedly to decrease/increase the
search speed.
ꢁTo resume normal playback, press
u (or PLAY X on the remote
control).
MP3/DivX/Windows Media™ Audio
ꢀ RPT ONE (repeat track)
ꢀ RPT ALL/FLD (repeat folder)
ꢀ SHUFFLE (random play)
ꢀ RPT OFF (exit repeat mode)
Helpful Hint:
– Repeat playback is not possible on VCDs
when the PBC mode is turned on.
Stopping playback
Press Ç.
ꢀ
Helpful Hint:
– This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
buttons within 30 minutes after a disc has
stopped playing.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Programming disc tracks
Other playback features
for video discs (DVD/VCD/
SVCD)
(not for Picture CD/MP3)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks.
A Press PROGRAM on the remote
control.
ꢁThe programming menu appears.
6
2
7
8
9
10
Exit
Start Next
B Use the numeric keypad (0-9) to
enter a valid track/chapter number.
C Use WXST keys to move the cursor to
the next position.
Using the Disc Menu
If there are more than ten total
programme tracks, select { Next } on
the screen and press OK (or press >
on the remote control) to access the
next programming page.
ꢀ
ꢀ
Depending on the disc format, a menu
may appear on the TV screen once you
load the disc.
To select a playback feature or item
Use WXST keys or numeric keypad
(0-9) on the remote control, then press
OK to start playback.
ꢀ
ꢀ
To remove the track/chapter from the
programming menu, select the track/
chapter and press OK.
To access or remove the menu
Press DISC MENU on the remote
control.
D Once complete, select { Start } on the
screen and press OK to start playback.
ꢁPlayback will start from the selected
track under the programmed sequence.
E To exit the programme menu, select
{ Exit } in the menu and press OK.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Viewing playback information
Resuming playback from the last
stopped point
This DVD system can display the disc
playback information (for example, title
or chapter number, elapsed playing time,
audio/subtitle language) and a number of
operations can be done without
This DVD system is able to resume disc
playback from its last stopped point (only
possible for the last 10 discs that were
recorded without a menu).
interrupting disc playback.
A Load one of the last 10 discs played.
A During playback, press DISPLAY.
ꢁA list of available disc information
appears on the TV.
B While “LOADING” appears on the
display panel, press PLAY X (or u) to
start playback from the last stop point.
DVD
To cancel the resume mode
Press Ç twice.
ꢀ
Zooming in
This option allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
VCD/SVCD
A During playback, press ZOOM on the
remote control repeatedly to select a
different zoom factor.
ꢁUse WXST keys to move through
the zoomed image.
ꢁPlayback will continue.
B Use ST keys to view the information
B Press ZOOM repeatedly to return to
and press OK to access.
the original size.
C Use the numeric keypad (0-9) to input
the number/time or use ST keys to
make the selection, then press OK to
confirm.
Changing subtitle language (DVD
only)
This operation works only on DVDs with
multiple subtitle languages. You can
change the language you want while
playing a DVD.
ꢁPlayback will change according to the
chosen time or to the selected title/
chapter/track.
Press SUBTITLE repeatedly to select
different subtitle languages.
ꢀ
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Changing sound track language
Preview function (VCD/SVCD only)
This operation works only on DVDs with
multiple soundtrack languages, you can
change the language you want while
playing a DVD.
This function allows you to preview the
contents of a VCD/SVCD.
A Press DISC MENU.
Select DigestType:
Press AUDIO repeatedly to select the
available audio languages.
ꢀ
ꢀ
Track Digest
Disc Interval
Track Interval
For VCD – changing the audio
channel
B Use ST keys to select one of the
Press AUDIO repeatedly to select the
available audio channels provided by the
disc (STEREO, MONO LEFT, MONO
RIGHT or MIX MONO).
following options and press OK.
{ Track Digest }
View six different tracks on one screen each
time. It allows you to have a quick glance at all
the tracks on the disc.
Switching camera angles
This option is only available with DVDs
that contain sequences recorded from
different camera angles. This allows you
to view the picture from different angles.
{ Disc Interval }
View the whole disc in six thumbnail pictures.
It divides a disc into six portions at regular
intervals and displays them on one screen.
Press ANGLE repeatedly to select the
available camera angles.
ꢀ
{ Track Interval }
View the content of a single track in six
thumbnail pictures. It divides a single track
into six portions at regular intervals and
displays them on one screen.
Playback Control (VCD only)
This option is only available during playback
mode.
Playback Control (PBC) playback allows
you to play Video CDs interactively,
following the menu on the display. This
function can also be accessed via the
‘Preference Page’ menu.
01
02
03
04
05
06
For VCDs with Playback Control
(PBC) feature (version 2.0 only)
Exit
Menu
To go to the previous or next page, press
./ >.
ꢀ
ꢀ
ꢀ
When playback is stopped, press
RETURN/TITLE to turn on or off the
PBC mode.
ꢀ
ꢀ
To return to the main menu, select
{ Menu } on the screen and press OK.
During playback, press RETURN/
TITLE to return to the disc title menu
or main menu.
Press OK on the selected thumbnail
picture to start playback from there.
C To exit the preview menu, select
{ Exit } on the screen and press OK.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
During playback, you can;
Playing an MP3/ JPEG/
Windows Media™ Audio disc
Press ./ > to playback another
track/file in the current folder.
ꢀ
ꢀ
ꢀ
This DVD system can playback most of
the MP3, JPEG and Windows Media™
Audio files recorded on a CD-R/RW disc
or commercial CD.
Hold down ./ > to fast reverse/
forward search for a music track.
To select another folder from the
current disc, press S to return to the
root menu. Use ST keys to make your
selection and press OK to confirm.
Before you start ...
Turn on your TV to the correct Video In
channel. See the section on “Finding the
correct viewing channel”.
Press REPEAT repeatedly to access
various play modes.
ꢀ
D To stop playback, press Ç.
A Insert a disc.
ꢁThe disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
Helpful Hint:
– To skip the folders menu when you load a
MP3/JPEG disc, set the MP3/JPEG NAV
setting in the Preference Setup Page to
{ Without Menu }.
ꢁThe disc menu appears on the TV.
00:19 04:39
001/003
\MP3_files_128kbs
Previous
Picture 1
Picture 2
MP3 Music 1
MP3 Music 2
050
003
000
B If the disc main menu contains various
folders, use ST keys to select a desired
folder and press OK to open the folder.
C Use ST keys to select a track/file and
press OK to start playback.
ꢁPlayback will start from the selected
file and continue through to the end of
the folder.
TIPS: Some discs cannot be played on this player due to the configuration and characteristics of the
disc, or due to the condition of recording and authoring software that was used.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Zoom picture
Playing a JPEG image file
(slide show)
A During playback, press ZOOM
repeatedly to select a different zoom
factor.
Before you start ...
Turn on your TV to the correct Video In
channel. See the section on “Finding the
correct viewing channel”.
B Use WXST keys to pan through the
zoomed image.
Helpful Hint:
– This feature is not applicable for DivX
disc.
Insert a Picture disc (Kodak Picture CD,
JPEG).
ꢁFor a Kodak disc, the slide show will
begin automatically.
ꢀ
ꢁFor a JPEG disc, the picture menu will
appear on the TV. Press PLAY X (or
u) to start the slide-show playback.
Rotating/flipping the picture
During playback, use WXST keys to
rotate/flip the picture on the TV.
ꢀ
S : flip the picture vertically
Preview function
T : flip the picture horizontally
W : rotate the picture anti-clockwise
X : rotate the picture clockwise
A During playback, press Ç.
ꢁ12 thumbnail pictures will be displayed
on the TV.
Supported file format:
– The file extension has to be ‘*.JPG’
and not ‘*.JPEG’.
– It can only display DCF-standard still
pictures or JPEG pictures e.g. TIFF. It
cannot play back moving pictures, Motion
JPEG, Progressive JPEG and other
formats, or pictures in formats other
than JPEG, or pictures associated with
sound.
– It may require longer time for the
DVD system to display the disc content
on the TV due to the large number of
songs/pictures compiled into one disc.
B Press ./ > to display the other
pictures on the previous/next page.
C Use WXST keys to highlight one of the
pictures and press OK to start playback.
D Press DISC MENU to return to Picture
CD menu.
TIPS: Some discs cannot be played on this player due to the configuration and characteristics of the
disc, or due to the condition of recording and authoring software that was used.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations (continued)
Playing MP3 music and JPEG
pictures simultaneously
Playing a DivX disc
This DVD system supports the playback
of DivX movies which you can copy from
your computer onto a CD-R/RW,
DVD+R/+RW disc (see ‘General Setup
Page - { DivX(R) VOD code }).
You can create a musical slide show if the
disc contains both the MP3 music and
JPEG picture files.
A Insert an MP3 disc that contains music
A Insert a DivX disc.
and pictures.
B If the DivX movie contains external
subtitles, the subtitle menu will appear on
the TV for your selection.
B Select an MP3 track in the menu and
press PLAY X (or u) to start
playback.
In this case, pressing SUBTITLE on the
remote control will turn the subtitle
display on or off.
ꢀ
C During MP3 music playback, use WXST
keys to select a picture folder from the
disc menu and press PLAY X (or u).
ꢁThe picture files will be played back
through to the end of the folder.
C Press PLAY X (or u) to start
playback.
D To stop simultaneous playback, press
During playback, you can;
DISC MENU and followed by Ç.
If multilingual subtitles are embedded on
the DivX disc, you can press SUBTITLE
to change the subtitle language while
playing.
ꢀ
Helpful Hints:
– It is normal to experience an occasional
“skip” while listening to your MP3 disc.
– It is normal to experience an occasional
pixelation during MP3/DivX playback due to
poor clarity of digital contents during internet
downloading.
Use W / X keys on the remote control
to perform fast reverse/forward search.
ꢀ
ꢀ
Press DISPLAY repeatedly until the
Time Search menu appears, key in the
time where playback should start and
press OK to confirm.
– Only the first session of a multi-session CD
will be played back.
ꢁPlayback skips to the time entered.
Helpful Hints:
– Subtitle files with the following file name
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
– The subtitle file name has to be the same
as the file name of the movie.
– The subtitle can only be displayed up to an
average of 45 characters.
TIPS: Some discs cannot be played on this player due to the configuration and characteristics of the
disc, or due to the condition of recording and authoring software that was used.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Accessing the DVD setup
menu
General Setup Page
Disc Lock
see page 31
Display Dim
Program
OSD Language
Screen Saver
DivX(R) VOD Code
This DVD system setup is carried out via
the TV, enabling you to customise the
DVD system to suit your particular
requirements.
SETUP
OK
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
see page 32
CD Upsampling
A In ‘DISC’ mode, press SETUP on the
remote control.
ꢁThe setup menu appears.
B Use W X keys to select one of the setup
Video Setup Page
menu pages and press OK.
TV Type
TV Display
Picture Setting
see page 33
If you are not able to access the
{ Preference Page }, press SETUP to
exit the menu. Then, press STOP (Ç)
twice before you press the SETUP
again.
ꢀ
C Use S T keys to select a setup option
Preference Page
and press X to access
Audio
Subtitle
D Select the setting you wish to change and
press OK to confirm and go back to the
previously selected item.
see pages
34~35
Disc Menu
PBC
MP3/JPEG Nav
Password
DivX Subtitle
Default
ꢁInstructions and explanations of the
options are provided in the following
pages.
ꢁIf the option in the menu is greyed
out, that means the setting is not
available or cannot be changed in the
current state.
E To exit, press SETUP.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options (continued)
General Setup Page (underlined options are the factory default settings)
Disc Lock
Not all discs are rated or coded by the disc maker. You can
prevent a specific disc from playing by locking the disc. Up to 40
discs can be locked.
{ Lock }
– Selects this to block the playback of the
current disc. Subsequent access to a locked
disc requires a six-digit password. The
default password is ‘136900’ (see ‘Preference
Setup Page - { Password }).
{ Unlock }
– All discs can be played.
Display Dim
Program
Selects the brightness of the DVD system display panel.
{ 100% }
{ 70% }
{ 40% }
– Full brightness.
– Medium brightness.
– Dimmest display.
Access the track programming menu. See ‘Programming disc
tracks’ chapter.
.
OSD language
Selects the preferred language for the DVD system on-screen
display menu.
Screen Saver
The screen saver prevents damage to the TV screen by avoiding
exposure to a static image for too long.
{ On }
– Switches to TV screen saver mode when
playback has been stopped or paused for
more than 15 minutes.
{ Off }
– Turns off the screen saver function.
DivX(R) VOD code
Philips provides you with the DivX¨ VOD (Video On Demand)
registration code that allows you to rent and purchase videos
using the DivX¨ VOD service. Press X to see the registration
code and press OK to exit.
Use the registration code to purchase or rent the videos from
instructions and copy the video from your computer onto a
CD-R/RW disc for playback on this DVD system.
Note: All the downloaded videos from DivX® VOD can only be played
com/vod.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
Speakers Volume
Speakers Delay
Access the speaker’s level setup menu. Use W X keys to adjust
the volume level for each connected speaker between -6dB to
+6dB.
Access the speaker’s distance setup menu. Use W X keys to set
the delay times for the centre and rear speakers based on the
listening position and distance.
Note: 1 ms increase/decrease of delay time is equivalent to 30 cm
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
Night Mode
This mode optimises playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On }
– Turns on night mode.
{ Off }
– Turns off night mode feature. Selects this to
enjoy the surround sound with its full
dynamic range.
CD Upsampling
This feature enables you to convert your music CD to a higher
sampling rate using sophisticated digital signal processing for
better sound quality. If you have activated the CD upsampling
feature, the system will automatically switch to stereo mode.
{ Off }
– Turns off CD-upsampling.
{ 88.2 kHz (X2) } – Select this to convert the sampling rate of
the CDs twice as high as the original rate.
Note: If you press the SURR button on the remote control to select
multi-channel mode, it will turn off the CD upsampling feature.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options (continued)
Video Setup Page (underlined options are the factory default settings)
TV Type
Selects the colour system that matches the connected TV. It will
enable playback of a different type of disc (PAL or NTSC disc) on
this DVD system.
{ PAL }
– For PAL-system TV.
{ NTSC }
{ Multi }
– For NTSC-system TV.
– For TV that is compatible with both PAL and
NTSC.
TV Display
The picture shape can be adjusted to fit your TV.
{ 4:3 Letter Box }– For a ‘wide-screen’ display
with black bars on the top and
bottom.
{ 4:3 Pan Scan }– For a full-height picture with the
sides trimmed.
{ 16:9 Wide Screen } – For wide-screen TV
(frame ratio 16:9).
Picture Setting
This DVD system provides three predefined sets of picture
colour settings and one personal setting which you can define
yourself.
{ Standard }
{ Bright }
{ Soft }
– Original colour setting.
– Vibrant colour setting.
– Warm colour setting.
{ Personal }
– Selects this to personalise your picture colour
setting. Use W X keys to adjust to the
setting that best suits your personal
preference and press OK to confirm. For an
average setting, select { 0 }.
{ Brightness }
Increase this value to brighten the picture colour
or vice versa.
{ Contrast }
Increase this value to sharpen the picture colour or
vice versa.
Personal Picture Setup
Brightness
Contrast
Tint
Color
{ Tint }
Increase or decrease this value to change the
colour phase of the picture.
{ Color }
Increase this value to enhance the picture colour
or vice versa.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options (continued)
Preference Setup Page (underlined options are the factory default settings)
Audio
Selects the preferred audio language for DVD playback.
Selects the preferred subtitle language for DVD playback.
Selects the preferred disc menu language for DVD playback.
Subtitle
Disc Menu
Note: If the selected audio/subtitle/disc menu language is not available
on the DVD, the disc’s default language will be used instead.
PBC
Play Back Control feature is applicable for VCD/SVCD only. It
allows you to play Video CDs (2.0) interactively, following the
menu on the display.
{ On }
– The index menu (if available) will appear on
the TV when you load a VCD/SVCD.
{ Off }
– The VCD/SVCD will skip the index menu and
playback directly from the beginning.
MP3/JPEG Nav
MP3/JPEG Navigator can only be set if the disc is recorded with a
menu. It allows you to select different display menus for easy
navigation.
{ Without Menu} – Displays all the files contained in the MP3/
Picture disc.
{ With Menu } – Displays the folder menu of the MP3/Picture
disc.
Note: This DVD system can only display 650 files/folder in the directory.
Password
The password is used for the Disc Lock. Enter your six-digit
password to play a locked disc or when prompted for a
password. The default password is ‘136900’. To change the
password:
1) Press OK to access the change password menu.
Change Password
2) Use the numeric keypad 0-9 on the remote control to
enter your existing six-digit password at { Old Password }.
Note: When doing this for the first time or if you forget your existing
password, key in ‘136900’.
Old Password
New Password
Confirm PWD
OK
3) Enter the new six-digit password at { New Password }.
4) Enter the new six-digit password again at { Confirm PWD }.
5) Press OK to confirm and exit the menu.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options (continued)
Preference Setup Page (underlined options are the factory default settings)
DivX Subtitle
Selects the font type that supports the recorded DivX subtitle.
{ Standard }
– Displays a standard list of Roman subtitle
fonts provided by this DVD system.
– Displays other subtitle fonts.
{ Others }
Default
This feature enables you to reset all the setup menu options and
your personal settings to the factory defaults, except your
password for the Disc Lock. Press OK to confirm the default
reset.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
display panel
Tuner Operations
IMPORTANT!
Make sure the FM and MW
antennas are connected.
Presetting radio stations
You can store up to 40 FM and 20 MW
preset radio stations in the memory.
There are three different ways to
programme the radio stations:
– Using auto install (for first time setup
only)
Tuning to radio stations
A Press SOURCE repeatedly until “FM”
appears on the display panel (or press
TUNER on the remote control).
– Using automatic preset
– Using manual preset
B Press S / T briefly on the remote
control to start tuning.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo signal is detected or less than
5 (five) stations are detected during tuner
installation, “PLEASE CHECK ANTENNA”
appears.
Î “SEARCH > or <” will appear on the
display panel until a radio station with
sufficient signal strength is found.
C Repeat step B if necessary until you find
the desired radio station.
D To fine-tune the reception of a weak
station, press W / X briefly and
repeatedly until optimal reception is
found.
Using auto install
This feature is only applicable for first
time radio station programming. You will
be prompted to install the radio stations
when you access the tuner mode. With
one touch of button, all the available
radio stations will be stored
automatically.
display panel
A Press TUNER.
Î “AUTO INSTALL PRESS PLAY”
appears.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations (continued)
B Press PLAY X until “START ...” appears
on the display panel.
Using manual preset
Use manual presetting to store your
favourite radio stations.
ꢁThe system will start searching from
the FM band followed by the MW band.
ꢁAll the available radio stations with
strong signal will be stored automatically.
ꢁOnce complete, the last tuned radio
station will be played back.
A Tune to your desired radio station (see
“Tuning to radio stations”).
B Press PROGRAM.
C Use ./ > keys to select a preset
number that you want to store the
current radio station.
Using automatic preset
Use automatic presetting to store or
reinstall all the preset radio stations.
D Press PROGRAM to store.
display panel
Selecting a preset radio
station
A Press TUNER to select “FM” or “MW’
band.
B Use ./ > keys to select a preset
number (or use the numeric keypad on
the remote control).
ꢁThe waveband, preset number
followed by the radio frequency will
appear on the display panel.
A Press TUNER to select “FM” or “MW’
band.
B Hold down PROGRAM until
“START ...” appears on the display panel.
ꢁAll previously stored radio stations
will be replaced.
Deleting a preset radio
station
A In tuner mode, use ./ > keys to
select a preset radio station.
B Hold down Çuntil “FM/MW X
DELETED” appears.
ꢁ“X” is the preset number.
ꢁThe radio station continues to play
but has been deleted from the preset list.
ꢁThe rest of the preset radio stations
remain unchanged.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound and Volume Controls
Selecting digital sound effects
Select a preset digital sound effect that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
Press SOUND to select the available
sound effect.
ꢀ
MUTE
When playing movie discs or in TV mode,
you can select :
SURR.
SOUND
CONCERT, DRAMA, ACTION or
SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
CLASSIC, JAZZ, ROCK or DIGITAL.
Selecting surround sound
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Press SURR. to select : DOLBY+PL II
(multi-channel) or STEREO.
ꢀ
ꢁThe availability of the various
surround sound modes depends on the
sound available on the disc.
Volume control
ꢁThe centre and rear speakers operate
only in multi-channel surround mode.
ꢁThe available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround and
Dolby Pro Logic II.
ꢁStereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the rear speakers.
Press VOL +/-on the remote
control to increase or decrease the
volume level.
ꢁ“VOL MIN” is the minimum volume
level and “VOL MAX” is the maximum
volume level.
ꢀ
ꢀ
To turn off the volume temporarily
Press MUTE on the remote control.
ꢁPlayback will continue without sound
and “MUTE” appears.
ꢁTo restore the volume, press MUTE
again, or increase the volume level.
Helpful Hint:
– You are not able to select the surround
sound mode if the system setup menu is
turned on.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Controlling ‘Philips’TV with
the remote control
Software upgrades
Periodically Philips will issue software
upgrades to enhance your user
experience.
This DVD system’s remote control
enables you to control the basic functions
of your ‘Philips’ brand TV.
Before you start ...
Check the current software version of
this DVD system:
1) Press OPEN CLOSE ç to open the
disc tray.
2) Press DISPLAY on the remote
control.
com/support’ to check the availability of
the latest software upgrade. Download
the software to a CD-R.
B Press OPEN CLOSE ç to open the
disc tray.
C Insert the CD-R and press
OPEN CLOSE ç again.
ꢁThe software will start to install on
the recorder automatically.
A Press SOURCE repeatedly until “TV”
appears on the display panel (or press
TV on the remote control).
IMPORTANT!
Power supply must not be interrupted
during upgrade!
B Use ./ > keys or the numeric
keypad (0-9) to select the TV’s channel.
C Press TV VOL +/- to adjust the TV’s
volume level.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.
Problem (General)
No power.
Solution
– Check if the AC power cord is properly connected.
– Press the 2(STANDBY ON) on the front of the
DVD system to turn on the power.
No picture.
– Refer to your TV’s manual for correct Video In
channel selection. Change the TV channel until you
see the DVD screen.
– Press the DISC button to select disc mode.
Completely distorted picture – If this happens when you are changing the setting of the
or black/white picture.
‘TV TYPE’, wait for 15 seconds for the auto recovery.
– Check the video connection.
– Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
– Clean the disc.
No sound or distorted sound. – Adjust the volume.
– Check the speaker connections and settings.
– Make sure that the audio cables are connected and
press the SOURCE button to select the correct input
source (for example, TV or AUX/DI) to choose the
device that you want to hear through the DVD
system.
There is no sound from the
centre and rear speakers.
– Make sure that the centre and rear speakers are
connected correctly.
– Press the SURR. button to select a correct surround
sound setting.
– Make sure that the source you are playing is recorded or
broadcast in surround sound (DTS, Dolby Digital, etc.).
The remote control does not – Select the source you want to play (for example,
function properly.
DISC or TUNER) before pressing the function button
(X, ./ >).
– Reduce the distance between the remote control and
the system.
– Replace the batteries with new ones.
– Point the remote control directly toward the IR sensor.
– Check that the batteries are loaded correctly.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Problem (Playback)
Solution
The DVD system does not
start playback.
– Insert a readable disc with the playback side facing
down. The DVD+R/CD-R must be finalised.
– Check the disc type, colour system (PAL or NTSC)
and region code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the system setup menu
screen.
– You may need to enter the password in order to
unlock the disc for playback.
– Moisture may have condensed inside the system.
Remove the disc and leave the system turned on for
about an hour.
The aspect ratio of the screen – The aspect ratio is fixed on the DVD disc.
cannot be changed even though – Depending on the TV, it may not be possible to
you have set the TV display.
change the aspect ratio.
Cannot activate some features – The features may not be available on the DVD.
such as Angles, Subtitles, or
multi-language Audio.
– Changing the language for the sound or subtitle is
prohibited on this DVD.
Not able to select some items – Press STOP button twice before selecting the system
in the setup/system menu.
setup menu.
– Depending on the disc availability, some menu items
cannot be selected.
Unable to play DivX movies.
Radio reception is poor.
– Check that the DivX file is encoded in ‘Home
Theatre’ mode with DivX certified encoder.
– If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the system and your
TV or VCR.
– Tune in to the correct frequency.
– Place the antenna further away from any equipment
that may be causing the interference.
The DVD system does not
work.
– Disconnect the power cord from the power outlet
for a few minutes. Reconnect the power cord and try
to operate again as usual.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analogue: Sound that has not been turned
into numbers. Analogue sound varies, while
digital sound has specific numerical values.
These sockets send audio through two
channels, the left and right.
Dolby Surround Pro Logic II: It is an
improved matrix decoding technology that
provides better spatiality and directionality
on Dolby Surround programme material,
provides a convincing three dimensional
sound field on conventional stereo music
recordings and is ideally suited to bring the
surround experience to automotive sound.
While conventional surround programming
is fully compatible with Dolby Surround Pro
Logic II decoders, soundtracks will be able to
be encoded specifically to take full advantage
of Pro Logic II playback, including separate
left and right surround channels. (Such
material is also compatible with conventional
Pro Logic decoders).
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional
TVs is 4:3, and that of wide-screens is 16:9.
Bit Rate: The amount of data used to hold
a given length of music; measured in kilobits
per second, or kbps. Or, the speed at which
you record. Generally, the higher the bit
rate, or the higher the recording speed, the
better the sound quality. However, higher bit
rates use more space on a disc.
DTS: Digital Theatre Systems. This is a
surround sound system, but it is different
from the Dolby Digital. The formats were
developed by different companies.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles.
A title is composed of several chapters. Each
chapter is assigned a chapter number
JPEG: A very common digital still picture
format. A still picture data compression
system proposed by the Joint Photographic
Expert Group, which features a small
decrease in image quality in spite of its high
compression ratio.
enabling you to locate the chapter you want.
Disc menu: A screen display prepared for
allowing a selection of images, sounds,
subtitles, multi-angles, etc to be recorded on
a DVD.
DivX: The DivX code is a patent-pending,
MPEG-4 based video compression
technology, developed by DivXNetworks,
Inc., that can shrink digital video to sizes
small enough to be transported over the
internet, while maintaining high visual quality.
MP3: A file format with a sound data
compression system. “MP3” is the
abbreviation of Motion Picture Experts
Group 1 (or MPEG-1) Audio Layer3. By
using the MP3 format, one CD-R or CD-RW
can contain about 10 times more data than a
regular CD.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing
up to six channels of digital audio (front left
and right, surround left and right, centre and
subwoofer).
Multichannel: DVDs are formatted to have
each sound track constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary (continued)
Playback control (PBC): Refers to the
signal recorded on video CDs or SVCDs for
controlling playback. By using menu screens
recorded on a Video CD or SVCD that
supports PBC, you can enjoy interactive
playback and searching.
Region code: A system allowing discs to be
played only in the region designated. This
unit will only play discs that have compatible
region codes. You can find the region code
of your unit by looking at the product label.
Some discs are compatible with more than
one region (or ALL regions).
Surround: A system for creating realistic
three dimensional sound fields full of realism
by arranging multiple speakers around the
listener.
Title: The longest section of a movie or
music feature on DVD. Each title is assigned
a title number, enabling you to locate the
title you want.
VIDEO OUT socket: Yellow socket on
the back of the DVD system that sends the
DVD picture video to a TV.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER
MAIN UNIT
Output power:
- Front:
200 W
Power Supply Rating: 220–240 V; 50 Hz
Power Consumption: 70 W
Eco Standby power: < 1 W
25 W / channel
25 W / channel
50 W
- Rear:
- Centre:
- Subwoofer:
Frequency Response: 20 Hz – 20 kHz / –3 dB
Signal-to-Noise Ratio: > 65 dB (CCIR)
Input Sensitivity
Dimensions:
(w x h x d)
Weight:
360 x 54 x 324 (mm)
50 W
2.66 kg
SPEAKERS
FRONT and REAR speakers
- AUX In:
1000 mV
System:
1-way, closed box system
TUNER
Tuning Range:
Impedance:
Speaker drivers:
Frequency response: 120 Hz – 20 kHz
4 Ω
FM 87.5–108 MHz (50kHz)
MW 531–1602 kHz (9kHz)
1 x 76 mm (3”) woofer
26 dB Quieting
Sensitivity:
Image Rejection Radio:FM 25 dB, MW 28 dB
IF Rejection Ratio: FM 60 dB, MW 45 dB
Dimensions:
(w x h x d)
Weight:
97.5 x 191.3 x 71.4 (mm)
FM 20 dB, MW 4μV/m
0.56 kg/each
Signal-to-Noise Ratio: FM 60 dB, MW 40 dB
AM Suppression Ratio: FM 30 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
CENTRE speaker
System:
Impedance:
1-way, closed box system
8 Ω
1 x 76 mm (3”) woofer
Speaker drivers:
MW 5%
Frequency response: 120 Hz – 20 kHz
Frequency Response: FM 180 Hz–10 kHz / 6 dB
Dimensions:
(w x h x d)
Weight:
239.3 x 99.6 x 69.4 (mm)
Stereo Separation:
Stereo Threshold:
FM 26 dB (1 kHz)
FM 23.5 dB
0.72 kg
SUBWOOFER
Impedance:
Speaker drivers:
DISC SECTION
Laser Type:
Disc Diametre:
Video Decoding:
8 Ω
Semiconductor
12cm / 8cm
MPEG-1 / MPEG-2 /
/ DivX 3/4/5/6, Ultra
12 Bits
PAL / NTSC
4:3 / 16:9
65 dB
165 mm (6.5”) woofer
Frequency response: 30 Hz – 120 Hz
Dimensions:
(w x h x d)
Weight:
194 x 266 x 339.5 (mm)
Video DAC:
Signal System:
Video Format:
Video S/N:
3.5 kg
Composite Video
Output:
1.0 Vp-p, 75Ω
Audio DAC:
24 Bits / 192 kHz
Frequency Response: 4 Hz–20 kHz (44.1 kHz)
4 Hz–22 kHz (48 kHz)
Specifications subject to change without prior
notice.
4 Hz–44 kHz (96 kHz)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|