Register your product and get support at
HSB2351/51
EN User manual
RU ǝȀǷǻǯǻDZǾǿǯǻ ǼǻǸȉǴǻǯǭǿDzǸȌ
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Important
Warning
• Never remove the casing of this unit.
• Never lubricate any part of this unit.
• Place this unit on a flat, hard and stable surface.
• Never place this unit on other electrical equipment.
• Only use this unit indoors. Keep this unit away from
water, moisture and liquid-filled objects.
Safety
Know these safety symbols
• Keep this unit away from direct sunlight, naked flames
or heat.
• Never look into the laser beam inside the unit.
Hearing safety
Listen at a moderate volume.
•
Using headphones at a high volume can
impair your hearing.This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute.The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
•
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can actually
be loud and harmful to your hearing.To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
The ‘exclamation point’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
CAUTION:To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Listen for reasonable periods of time:
Warning
•
Prolonged exposure to sound, even at
normally ‘safe’ levels, can also cause hearing
loss.
• Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
•
Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
•
Listen at reasonable volumes for
reasonable periods of time.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Wall mounting of the unit should only be
performed by qualified personnel.The unit
must only be mounted on an appropriate wall
bracket and on a wall that can safely hold the
weight of the unit. Improper wall mounting
can result in severe injury or damage. Do not
attempt to wall mount the unit yourself.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Environmental information
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
Official DivX® Ultra Certified product.
Plays all versions of DivX® video (including
DivX® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Manufactured under license from Dolby
Laboratories.
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS,
Inc. © 1996-2008 DTS, Inc.All Rights Reserved.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
This apparatus includes this label:
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
Note
• The type plate is located on the bottom of the
apparatus.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
The unit supports these media/disc formats:
2 Your DVD
HomeTheater
System
Recordable
Congratulations on your purchase, and
ReWritable
welcome to <brand>!To fully benefit from
the support that <brand> offers, register your
This DVD HomeTheater System is designed
to complement your home perfectly. Enjoy the
DVD HomeTheater System with multi-channel
surround sound and excellent picture quality.
You can play DVD discs with the following
region codes:
Introduction
With this unit, you can:
DVD region code
Countries
•
watch video from DVD/VCD/SVCD or
USB devices
Russia
•
•
•
•
enjoy audio from discs or USB devices
view pictures from discs or USB devices
listen to FM radio
Control EasyLink-compliant devices
through a single remote control
Sync audio output with the video output
You can enrich sound output with these
sound effects:
What’s in the box
•
Check and identify the contents of your
package:
•
•
Surround sound experience
Preset sound modes
•
•
•
•
•
•
•
•
•
Main unit
Speakers (x 2)
Power adapter for the main unit
Power cord
Remote control (with batteries)
FM wire antenna
AV cable (red/white/yellow)
USB extension cable
Wall mount bracket and screws (x4)
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
a b c d ef g h
l k j
i
g
h
Caution
•
•
Open the disc compartment.
Start or pause play.
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
i Disc compartment
j Remote control sensor
k Display panel
a SOURCE
•
Select a source.
b MP3 LINK
•
Display current status.
•
•
Jack for an external audio device.
l
c
d
•
USB socket.
Turn on the unit or switch to standby
mode.
•
•
Stop play.
Erase a preset radio station.
e VOL -/+
•
Adjust volume.
f
/
•
•
Skip to the previous/next title/
chapter/track.
Select a preset radio station.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
b Source selection keys
Overview of the remote
control
•
Select a source.
c
d
OPTIONS
•
Access or exit the system setup menu.
/
a
b
•
•
•
For menus: navigate up/down.
Move an enlarged picture up/down.
Rotate or invert pictures.
e OK
•
Confirms an entry or selection.
c
d
e
w
f
/ ( / )
•
•
•
•
For menus, navigate left/right.
Search within a track or disc.
Move an enlarged picture left/right.
Tune to a radio station.
f
g
INFO
g
h
v
u
•
•
For video/audio play, display
information about the current status
or the disc.
i
j
For pictures, display a thumbnail view
of picture files.
h
/
•
•
Skip to the previous/next title/
chapter/track.
Select a preset radio station.
t
s
k
i
j
•
Start or pause play.
l
•
•
Stop play.
Erase a preset radio station.
r
q
p
m
n
k TREBLE / BASS
Change treble or bass. Use with
+/-.
•
o
l Numeric keypad
•
Select a title/chapter/track directly.
Select a preset radio station directly.
•
m AUDIO SYNC
•
Access audio delay setting.
a
n SOUND
•
Turn on the unit or switch to standby
mode.
•
Selects a predefined sound effect.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
o ZOOM
•
For pictures or video: zoom in/out.
p REPEAT A-B
•
Repeat a specific section within a
track/disc.
q REPEAT/PROGRAM
•
Selects or turns off repeat or shuffle
mode.
Program radio stations.
•
r SUBTITLE
•
Select DVD or DivX subtitle language.
s SURROUND
•
Enable/disable DolbyVirtual Speakers
(DVS) sound effect.
t
u
+/-
•
•
Adjust volume.
Mute or restore volume.
v MENU/BACK
•
Return to the previous screen.
For video discs: access or exit the disc
menu.
•
•
For video discs with playback
control(PBC): turn on/off PBC.
w AUDIO
•
ForVCD, select stereo, mono-left or
mono-right channel.
•
For DVD/DivX video, select an audio
language.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect
Place the unit
2 Attach the left speaker to the left side of
the main unit.
1 Place the unit near to theTV.
2 Keep the speakers at the normal listening
ear-level and directly parallel to the
listening area.
3 Repeat step 2 to attach the right speaker.
4 Insert the supplied studs into the holes.
Note
• To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where the AC power
plug can be easily reached.
Attach speakers to the main
unit
1 Place the main unit on a soft and flat
surface.
•
Ensure that the rear side faces
upwards.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ConnectTV
Note
• To use Philips EasyLink, you must use HDMI connection
(see “Use Phlips EasyLink”).
Option 1: Connect through AV cable -
Basic quality
• This unit is HDMI CEC compatible. It enables the
connectedTV/device to control each other over HDMI.
AV out provides basic analogue connectivity.
TV
HDMI IN
IDI
TV
a Connect an HDMI cable (not supplied)
to:
1 Connect one end of the AV cable (red/
white/yellow) to the AV input sockets on
theTV.
•
•
- the HDMI socket on this unit.
- the HDMI input socket on theTV.
2 Connect the other end to the AV OUT
(VIDEO , AUDIO L/R) sockets on the unit.
Tip
• If yourTV has only a DVI connection, connect through
a HDMI/DVI adaptor.An extra audio connection is
needed to complete this connection.
Note
• If you want to listen to sound from the unit instead of
fromTV, connect the video cable (yellow) only. Do not
connect the audio cable (red and white).
Option 3: Connect through
component - Higher quality
Component video provides better picture
quality than AV out connections.Though
component video supports high-definition
signals, picture quality is lower than HDMI and
is analogue.
Option 2: Connect through HDMI -
Highest quality
If you want to experience full high-definition
video, use HDMI connection. HDMI provides an
uncompressed, digital interface between your
TV and the unit. Both audio and video signals
are combined in one HDMI cable.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect FM antenna
Tip
• This unit does not support MW radio reception.
FM ANT
TV
P
b
CONENTEO IT
a Connect a component video cable (red/
blue/green - not supplied) to:
•
•
- the COMPONENT (Pr/Cr Pb/Cb
Y) sockets on this unit.
- the component input sockets on
theTV.
1 Connect the supplied FM antenna to the
FM ANT socket on the unit.
Connect audio cables
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! When you unplug the AC power,
always pull the plug from the socket. Never pull the
cord.
TV
• Before you connect the AC power, ensure you have
completed all other connections.
L DIO OR
1 To play sound from theTV through this
unit, connect audio cables (red/white - not
supplied) to:
•
•
the AUX L/R sockets on this unit.
the audio output sockets on theTV.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
c
b
Connect the power adaptor with main unit and
power cord, then connect the plug to the wall
outlet.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Get started
1
Caution
3
2
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Turn on
1 Press .
» The unit switches to the last selected
source.
Find the correct viewing
channel
Prepare the remote control
Caution
1 Press DISC to switch to disc mode.
2 Press the source button repeatedly on the
remote control of yourTV.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Tip
• The video-in channel may be called AV,VIDEO, HDMI
etc. See theTV user manual on how to select the
correct input on theTV.
Note
• Perchlorate Material - special handling may apply. See
Select the correctTV system
1 Open the battery compartment.
2 Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting forTVs in your country.
3 Close the battery compartment.
1 Press OPTIONS.
2 Select [Video Setup].
3 Select [TVType] and then press .
4 Select a setting and then press OK.
•
[PAL] - ForTV with PAL color system.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[NTSC] - ForTV with NTSC color
system.
Note
[Multi] - ForTV that is compatible
with both PAL and NTSC.
• If a blank/distorted screen is displayed, wait for 15
seconds for auto recovery or turn off progressive scan
manually.
5 To exit the menu, press OPTIONS.
9 Turn on the progressive scan mode on the
TV.
Select menu display language
Turn off progressive scan manually
1 Press OPTIONS.
2 Select [General Setup].
1 Turn off the progressive scan mode on the
TV.
3 Select [OSD Language] and then press .
4 Select a setting and then press OK.
5 To exit the menu, press OPTIONS.
2 Press OPTIONS.
3 Press / to select [Video Setup] in the
menu, then press .
4 Select [Progressive] > [Off], then press
OK.
Turn on Progressive Scan
5 To exit the menu, press OPTIONS.
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinaryTV system).With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Use Philips EasyLink
This unit supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Before you turn on this feature, ensure that:
•
•
TheTV supports progressive scan
signals.
You have connected this unit with the
TV through component video.
1 Turn on theTV.
2 Ensure that theTV progressive scan mode
is deactivated (see theTV user manual).
Note
• Philips does not guarantee 100% interoperability with
all HDMI CEC devices.
3 Switch theTV to the correct viewing
channel for this unit.
1 Turn on the HDMI CEC operations on the
TV or other connected devices. SeeTVs/
devices manual for details.
4 Press DISC.
5 Press OPTIONS.
6 Press / to select [Video Setup] in the
menu, then press .
2 You can now enjoy the following Philips
EasyLink controls.
7 Select [Progressive] > [On], then press
OK.
» A warning message is displayed.
8 To proceed, select [Ok] and press OK.
» The progressive setup is complete.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
One touch play[AutoWakeupTV]
When you press
, this unit will wake up
from standby mode and start disc play (if a
video disc is found in the disc compartment).
At the same time, yourTV will also be turned
on and be switched to the correct viewing
channel.
One touch power-off[System Standby]
When you connect this unit to devices that
support standby mode, you can use the
remote control of this unit to switch this unit
and all connected HDMI devices to standby
mode.You can also use the remote control
from any of the connected HDMI devices to
perform one-touch standby .
One touch audio play[System Audio Control]
When you connect this unit to HDMI
CEC compliant devices, the unit can switch
automatically to play audio from the
connected device.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to the menu during play:
5 Play
1 Press MENU/BACK.
Note
Note
• To see the disc menu of aVCD disc, you must turn on
PlayBack Control (PBC) feature of the disc.
• With some disc/file types, play may differ.
Select an audio language
Play discs
You can select an audio language on DVDs,
DiVx video orVCDs.
1 During disc play, press AUDIO.
» The language options appear. If the
selected audio channels is unavailable,
the default disc audio channel is used.
Caution
• Never look at the laser beam inside the unit.
• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
• Never put any objects other than discs into the disc
compartment.
Note
• For some DVDs, the language can only be changed
from the disc menu. Press MENU/BACK to access the
menu.
1 Press DISC to select the DISC source.
2 Press on the main set to open the disc
compartment.
3 Place a disc into the disc compartment and
press
.
Select a subtitle language
» Ensure that the label faces outwards.
You can select a subtitle language on DVDs or
DivX® Ultra discs.
4 Play starts automatically.
•
•
•
To stop play, press .
•
During play, press SUBTITLE.
To pause or resume play, press
To skip to the previous/next title/
chapter/track, press / .
.
Tip
• For some DVDs, the language can only be changed
from the disc menu. Press MENU/BACK to access the
menu.
If play does not start automatically:
•
Select a title/chapter/track and then press
.
Tip
Sync audio output with video play
• To play a locked DVD, enter the 4-digit parental control
password.
If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
1 Press and hold AUDIO SYNC until
‘AUDIO SYNC XXX’ is displayed.
» ‘XXX’ denotes the delay time.
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on theTV screen.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Within five seconds, press +/- to set
the delay time for audio output.
Play DivX video
You can play DivX files copied onto a CD-R/
RW, recordable DVD or USB device.
1 Insert a disc or connect a USB device.
Play from USB
2 Select a source:
•
•
For discs, press DISC.
For USB devices, press USB.
Note
• Ensure that the USB device contains playable music,
pictures or video.
3 Select a title to play, then press
.
•
•
•
To stop play, press .
To pause or resume play, press
To change a subtitle language, press
.
1 Connect the supplied USB extension cable
to:
SUBTITLE.
•
•
the USB device
the socket
Note
• You can only play DivX videos rented or purchased
through the DivX registration code of this unit.
• Subtitle files with the following filename extensions (.srt,
.smi, .sub, .ssa, .ass) are supported but do not appear on
the file navigation menu.
• The subtitle filename has to be the same as the file
name of the video.
Play MP3/WMA/picture files
You can play MP3/WMA/picture files copied
onto a CD-R/RW, recordable DVD or USB
device.
1 Insert a disc or connect a USB device.
2 Select a source:
•
•
•
For discs, press DISC.
For USB devices, press USB.
A contents menu is displayed.
2 Press USB to select the USB source.
» A contents menu is displayed.
3 Select a folder, then press OK.
3 Select a folder, then press OK.
4 Select a file to play, then press
.
4 Select a file to play, then press
.
•
To return to the main menu, press
until the ‘Previous’ folder is selected,
then press OK.
•
To return to the main menu, press
until the ‘Previous’ folder is selected,
then press OK.
•
•
•
To stop play, press .
To pause or resume play, press
•
•
•
To stop play, press .
To pause or resume play, press
.
.
To skip to the previous/next file, press
/ .
To skip to the previous/next file, press
/ .
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel resume mode and stop play
completely:
Play control
1 In stop mode, press .
Select repeat/shuffle play options
1 During play, press REPEAT/PROGRAM
repeatedly to select a repeat option or the
shuffle play mode.
Play options
•
To resume normal play, press
REPEAT/PROGRAM repeatedly until
[Repeat Off] is displayed.
Display play information
1 During play, press INFO repeatedly to
display play information.
Repeat A-B (DVD/VCD/CD/MP3/
WMA)
Zoom in/out image
1 During music or video play, press REPEAT
A-B at the start point.
1 During video/picture play, press ZOOM
repeatedly to zoom in/out the image.
•
When the image is zoomed in, you
can press / / / to pan through
the image.
2 Press REPEAT A-B at the end point.
» The selected section starts to play
repeatedly.
•
To cancel repeat play, press REPEAT
A-B again.
Change the audio channel
Note
Note
• This feature is only available forVCD/DivX play.
• The section A and B can be set only within the same
track/title.
1 During play, press AUDIO repeatedly to
select an audio channel available on the
disc:
Search forward/backward
•
•
•
Mono Left
Mono Right
Stereo
1 During play, press / ( / ) repeatedly
to select a search speed.
•
To resume play at normal speed, press
.
Select an audio language
Resume video play from last stopped
point
Note
• This feature is only available for DVDs/DivX videos
recorded with multiple audio languages.
Note
• This feature is only available for video play.
1 Press AUDIO repeatedly to select an
audio language.
1 In stop mode and when the disc has not
been removed, press OK.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
» To return to the menu, press MENU/
BACK.
Select a subtitle language
Note
3 To stop slideshow play, press .
4 To stop music play, press again.
• This feature is only available for DVDs/DivX videos
recorded with multiple audio languages.
1 Press SUBTITLE repeatedly to select an
available subtitle language.
Picture view options
Start slideshow of pictures
1 During play, press .
» The thumbnails of 12 pictures are
displayed.
2 Select a file, then press
slideshow play.
to start
•
•
•
To go to previous or next screen
display, press / .
To select a picture, press the cursor
buttons.
To display the selected photo only,
press OK.
Rotate picture
1 During play, press / to rotate the
picture anti-clockwise/clockwise.
Start musical slideshow
You can play MP3/WMA music files and JPEG
photo files simultaneously to create musical
slideshow.The MP3/WMA and JPEG files must
be stored on the same disc or USB device.
1 Play MP3/WMA music.
2 Navigate to the photo folder/album and
press
to start slideshow play.
» Slideshow begins and continues till the
end of the photo folder or album.
» Audio continues to play till the end of
the disc.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
6 Adjust settings
• You must turn on the HDMI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See theTV/devices manual for details.
1 Press OPTIONS .
2 Select a setup page.
Philips does not guarantee 100%
interoperability with all HDMI CEC compliant
devices.
3 Select an option and then press .
4 Select a setting and then press OK.
•
To return to the previous menu, press
.
To exit the menu, press OPTIONS .
[Disc Lock]
Set play restriction for specific discs. Before you
start, place the disc in the disc compartment
(maximum 40 discs can be locked).
•
•
[Lock] – Restrict access to the
current disc.You need to enter a
password to unlock and play the disc.
[Unlock] – Play all discs.
General setup
•
On [General Setup Page], you can set the
following options:
[EasyLink]
Tip
If this unit is connected to HDMI CEC
compliantTV/devices, all connected devices
can respond to the following commands
simultaneously:
• To set or change the password, go to [Preference
Setup] > [Password].
[Display Dim]
Option
[One
Description
Changes the brightness level of the display
panel on this unit.
When you press
, theTV and
•
•
•
[100%] – Normal brightness.
[70%] – Medium brightness.
[40%] – Dimmest display.
Touch
Play]
this unit are turned on. Disc play
starts if there is a disc in the unit.
When you press and hold
[System
Standby] , connected HDMI CEC devices
simultaneously switch to standby.
To disable this feature, select
[Decline].
[OSD Language]
Select the preferred language for on-screen
display.
[System
Audio
When you play audio that is
routed from the connected
[Screen Saver]
Control] devices, this unit switches to
the corresponding audio source
automatically.
The screen saver protects theTV screen
damage due to prolonged exposure to a static
image.
To enable this feature, select [On].
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
•
•
[On] – Enable the screen saver.
[Off] – Disable the screen saver.
[Audio When you map the audio input
Input correctly, this unit switches to
Mapping] the audio from the played device
[SleepTimer]
Switches to standby automatically after the
preset time.
automatically.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[15 mins], [30 mins], [45 mins], [60
mins] – select the count down time
before the apparatus switches to
standby.
Video setup
On [Video Setup Page], you can set the
following options:
[TVType]
[Off] – disable sleep mode.
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting forTVs in your country.
[DivX(R)VOD Code]
Display the DivX® registration code.
•
•
[PAL] – ForTV with PAL color system.
[NTSC] – ForTV with NTSC color
system.
Tip
• Enter this DivX registration code when you rent or
videos rented or purchased through the DivX®VOD
(Video On Demand) service can be played only on the
device to which it is registered.
•
[Multi] – ForTV that is compatible
with both PAL and NTSC.
[TV Display]
TheTV format determines the aspect ratio of
display according to the type ofTV you have
connected.
Audio setup
On [Audio Setup Page], you can set the
following options:
[HDMI Audio]
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
When you connect this apparatus andTV with
an HDMI cable, select the audio output setting
for this connection.
•
•
•
[4:3 Pan Scan] – For 4:3 screenTV:
full-height display with the trimmed
sides.
•
[On] – the sound is output through
both yourTV and this apparatus. If
the audio format on the disc is not
supported, it is downmixed to two-
channel sound (Linear-PCM).
[4:3 Letter Box] – For 4:3 screenTV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9Wide Screen] – For wide-
screenTV: display ratio 16:9.
•
[Off] – disable audio output from the
TV.The sound is only output through
this apparatus.
[Progressive]
Turn on or off progressive scan mode.
[Picture Settings]
[Night Mode]
Select a predefined set of picture color settings
or customize your personal setting.
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
•
•
•
[Standard] – original color setting.
[Bright] – vibrant color setting.
[Soft] – warm color setting.
[Personal] – customize the color
setting.Adjust the level of brightness,
contrast, sharpness/tint and color
saturation.
•
[Off] – enjoy surround sound with its
full dynamic range.
•
[On] – enjoy quiet viewing at night
(DVDs only).
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
[HDMIVideo] – Select the HDMI video output
resolution that is compatible with yourTV
display capability.
[Parental]
Restricts access to discs that are unsuitable for
children.These types of discs must be recorded
with ratings.
Option
[Auto]
Description
1) Press OK.
Detect and select
the best supported
video resolution
automatically.
2) Select a rating level, then press OK.
3) Press the numeric keys to enter the
password.
[480p],
[576p],
[720p],
[1080i],
[1080p]
Select a video
resolution that is best
supported by yourTV.
See yourTV manual
for details.
Note
• Rated discs above the level you set in [Parental]
require a password to be played.
• The ratings are country-dependent.To allow all discs to
play, select ‘8’.
[Closed Caption]
• Some discs have ratings printed on them but are not
recorded with ratings.This function has no effect on
such discs.
Turn off or on display captions.
•
[On] – show the sound effects in
subtitles.Applicable only to discs with
Closed Caption information included
and theTV that supports this feature.
[Off] – turn off closed caption.
Tip
•
• You can set or change the password (see [Preference
Setup] > [Password]).
[PBC]
Preference setup
Turns on or off the content menu ofVCDs/
SVCDs with PBC (playback control) feature.
On [Preference Page], you can set the following
options:
[Audio]
•
[On] - display index menu when you load
a disc for play.
•
[Off] - skip the menu and start play from
the first title.
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
[MP3/JPEG Nav]
Select to display the folders or display all the
files.
•
[With Menu] – display the folders of MP3/
WMA files.
[Without Menu] – display all the files.
Select the preferred disc menu language.
•
Note
• If the language you have set is not available on the disc,
the disc uses its own default language.
[Password]
Set or change the password for locked discs
and play restricted DVDs.
• For some discs, the subtitle/audio language can only be
changed from the disc menu.
• To select the languages that are not listed in the menu,
select [Others].Then check the Language Code list at
the back of this user manual and enter the respective
4-digit language code.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[Version Info]
1) Press the numeric keys to enter ‘0000’ or
your last set password at [Old Password] field.
2) Enter the new password at [New
Password] field.
Display the software version of this apparatus.
Tip
3) Enter the new password again at [Confirm
PWD] field.
4) Press OK to exit the menu.
• This information is required when you want to find out
if a newest software version is available at the Philips
website that you may download and install on this
apparatus.
Note
[Default]
Resets all the settings of this apparatus to
factory default, except for [Disc Lock],
[Password] and [Parental] settings.
• If you forget the password, enter ‘0000’ before you set
a new password.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
[Standard] English, Irish, Danish, Estonian,
Finnish, French, German, Italian,
Portuguese, Luxembourgish,
Norwegian (Bokmål and
Nynorsk), Spanish, Swedish,
Turkish
[Central
Europe]
Polish, Czech, Slovak,Albanian,
Hungarian, Slovene, Croatian,
Serbian (Latin script), Romanian
Belarusian, Bulgarian, Ukrainian,
Macedonian, Russian, Serbian
Greek
[Cyrillic]
[Greek]
[Hebrew] Hebrew
Note
• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is ‘Movie.avi’, then you will need to name the
text file ‘Movie.sub’ or ‘Movie.srt’.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Program radio stations
manually
7 Tune to FM
radio stations
Note
• You can program a maximum of 20 preset radio
stations.
1 Ensure that you have connected and fully
extended the supplied FM antenna.
2 Press RADIO.
3 Press and hold / ( / ).
4 When the frequency indication starts to
change, release the button.
1 Tune to a radio station.
2 Press REPEAT/PROGRAM to activate
programming.
» The FM tuner tunes to a station with
strong reception automatically.
3 Press / to allocate a number from
1 to 20 to this radio station, then press
REPEAT/PROGRAM to confirm.
5 Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
» The preset number and the frequency
of the preset station are displayed.
Press / ( / ) repeatedly until you find
optimal reception.
4 Repeat the above steps to program other
stations.
Program radio stations
automatically
Note
• To overwrite a programmed station, store another
station in its place.
Note
• You can program a maximum of 20 preset radio
stations.
Tune to a preset radio station
1 Press / to select a preset number to
start programing.
1 Press / to select a preset number
that you want.
2 Press and hold REPEAT/PROGRAM
for 2 seconds to activate automatic
programming.
Tip
• You can also use the numerical keypad to select a
preset station directly.
» [AUTO] (auto) is displayed briefly.
» All available stations are programmed
in the order of waveband reception
strength.
» The last programed radio station is
broadcast automatically.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Within 5 seconds, press
+/- to set the
8 Adjust volume
level and sound
effect
level for high tones (treble) or low tones
(bass).
Mute sound
1 During play, press to mute/unmute
sound.
Adjust volume level
1 During play, press +/- to increase/
decrease the volume level.
Select a sound effect
Note
• You cannot use different sound effects at the same
time.
Select a preset sound effect
1 During play, press SOUND repeatedly to
select:
•
•
•
•
•
[CLASSIC] (Concert)
[ROCK] (Action)
[Sports] (Gaming)
[Lounge] (Drama)
[Night]
Select surround sound effect
DVS (DolbyVirtual Speaker) technology
creates a highly compelling 5.1-channel listening
experience from as few as two speakers. It is an
ideal entertainment solution for locations where
space for multiple speaker setup is limited.
1 During play, press SURROUND to turn
on/off surround sound effect.
Adjust treble/bass level
1 Press TREBLE or BASS.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Connect other
devices
Listen to an audio player
You can listen to an audio player through this
unit.
1 Connect the audio player.
•
•
•
For audio players with red/white
audio output sockets:
Connect a red/white audio cable (not
supplied) to the AUX IN L/R sockets
and to the audio output sockets on
the audio player.
For audio players with headphone
sockets:
Connect a 3.5mm audio cable (not
supplied) to the MP3 LINK socket
and to the headphone socket on the
audio player.
For audio players with optical sockets:
Connect an optical cable (not
supplied) to the OPTICAL IN socket
and to the optical output socket on
the audio player.
2 Select the AUDIO SOURCE or MP3 LINK
source.
3 Start play on the audio player.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner (FM)
10 Product
information
Tuning Range
87.5 - 108MHz
50KHz
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
Search Selectivity
<22 dBf
>28dBf
Note
Total Harmonic Distortion <3%
• Product information is subject to change without prior
notice.
Signal to Noise Ratio
>50dB
Speakers
Speaker Impedance
2x8ohm
Specifications
Speaker Driver, base 3” woofer
Speaker Driver,
tweeter
19mm tweeter
Amplifier
Rated Output Power 2X50WRMS
Frequency Response 20 -20kHz, 3dB
Signal to Noise Ratio >67dB
Sensitivity
>83dB/m/W
4dB/m/W
Aux Input
500mv RMS, 20kohm
General information
AC power
120/230V,
50/60Hz
45W
Disc
Operation Power
Consumption
LaserType
Semiconductor
12cm/8cm
MPEG-1 / MPEG-2 /
DivX
Disc Diameter
Video Decoding
Normal Standby power
Consumption
<4W
Low Power Standby power <1W
Consumption
Video DAC
Signal System
Video Format
Video S/N
12Bits
PAL / NTSC
4:3 / 16:9
CompositeVideo Output
HDMI (CEC) Output
USB Direct
1.0Vp-p, 75ohm
1.3a
>48dB
Version 2.0
800 x 140 x 97
mm
Audio DAC
Total Harmonic
Distortion
24Bits / 96kHz
<1%
Dimensions
- Main Unit (W x H x D)
Weight
- With Packing
Frequency
Response
4Hz - 20kHz (44.1kHz)
4Hz - 22kHz (48kHz)
4Hz - 24kHz (96kHz)
>67dBA
5 kg
S/N Ratio
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported formats:
Supported disc formats
•
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
•
•
•
•
DigitalVideo Discs (DVDs)
Video CDs (VCDs)
SuperVideo CDs (SVCDs)
DigitalVideo Discs + Rewritable
(DVD+RW)
•
•
WMA v9 or earlier
Directory nesting up to a maximum
of 8 levels
•
•
•
•
•
Compact Discs (CDs)
Picture (Kodak, JPEG) files on CDR(W)
DivX(R) disc on CD-R(W):
DivX 3.11, 4.x and 5.x
WMA
•
Number of albums/ folders: maximum
99
•
•
•
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8
(maximum length: 128 bytes)
Supported MP3-CD formats:
•
•
•
•
•
•
•
ISO 9660
Max. title/album name: 12 characters
Max. title number plus album: 255.
Max. nested directory: 8 levels.
Max. album number: 32.
Unsupported formats:
•
•
Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in the
display.
Max. MP3 track number: 999.
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
Unsupported file formats are skipped.
For example,Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
•
•
The following formats are not supported:
•
•
AAC,WAV, PCM audio files
DRM protected WMA files (.wav,
.m4a, .m4p, .mp4, .aac)
•
•
•
•
•
Files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV
Non-English Album/Title name
Discs recorded in Joliet format
MP3 Pro and MP3 with ID3 tag
•
WMA files in Lossless format
USB playability information
Compatible USB devices:
•
USB flash memory (USB 2.0 or
USB1.1)
•
•
USB flash players (USB 2.0 or USB1.1)
memory cards (requires an additional
card reader to work with this
apparatus)
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Troubleshooting
No disc detected
•
•
Insert a disc.
Check if the label side of the disc faces
outwards.
Warning
•
Wait until the moisture condensation at
the lens has cleared.
• Never remove the casing of this apparatus.
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
To keep the warranty valid, never try to repair
the system yourself.
Black and white or distorted picture
•
The disc does not match theTV color
system standard (PAL/NTSC).
Sometimes a slight picture distortion may
appear.This is not a malfunction.
Clean the disc.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome.When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power
•
•
•
A distorted picture may appear during
progressive scan setup.
The aspect ratio of theTV screen cannot be
changed even though you have set theTV
display format.
•
•
•
Ensure that the AC cord of the unit is
connected properly.
•
The aspect ratio if fixed on the loaded
DVD disc.
Ensure that there is power at the AC
outlet.
•
The aspect ratio may not be changed for
someTV systems.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound
•
•
Adjust the volume.
Check that the speakers are connected
correctly.
No picture
•
•
Check the video connection.
Turn on theTV to the correctVideo-In
channel.
•
•
If there is no sound in the USB mode,
ensure that you have connected a USB
device that contains playable music.
If there is no sound in the AV mode,
ensure that you have connected AV
devices to the system correctly.
•
Progressive scan is activated but theTV
does not support progressive scan.
USB device not supported
•
The USB device is incompatible with the
unit.Try another one.
Cannot display some files in USB device
Remote control does not work
•
Before you press any function button, first
select the correct source with the remote
control.
•
The number of folders or files in the USB
device has exceeded a certain limit.This
phenomenon is not a malfunction.
The formats of these files are not
supported.
•
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the batteries.
No picture on HDMI connection.
•
•
•
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
Aim the remote control directly at the
sensor on the front of the unit.
•
If this happens when you change the
HDMI video resolution, select the correct
resolution until the picture appears.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc does not play
•
Insert a readable disc and ensure that the
label side faces outwards.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
•
•
Press OPTIONS to exit the system
setup menu.
Disable the password for parental control
or change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control is
operated.
•
Poor radio reception
•
Increase the distance between the unit and
yourTV orVCR.
Fully extend the FM antenna.
•
•
Connect an outdoor FM antenna instead.
Unable to select Progressive Scan
•
Ensure the component video mode is set
to [YUV].
No sound on HDMI connection.
•
You may not hear any sound if the
connected device is non-HDCP compliant
or only DVI-compatible.
Audio or subtitle languages cannot be set
•
The disc is not recorded with sound or
subtitles in multiple languages.
•
The audio or subtitle language setting is
prohibited on the disc.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
You can use the supplied bracket to mount the
main unit and speakers to the wall.
12 Appendix
1 Align the bracket in the chosen location
on a wall. Use a pencil to mark the drilling
positions.
Mount to a wall
Caution
• Risk of product damage! Always consult professional
personnel to safely mount the product to a wall.
• Risk of injury! Ensure that no supply ducts such as gas,
water or electricity are harmed when you drill the
holes.
What’s in the supplied mounting kit
2 Drill holes as marked.
1 x wall mount bracket for the main unit and
speakers
4 x screws
What else you’ll need
•
•
•
Electric drill
Screwdriver
Pencil
3 Secure the wall mount bracket onto the
wall with 4 supplied screws.
Mount the main unit and speakers
Caution
• To find a suitable mounting location, make the
necessary physical and wireless connections.
• Mount the main unit and speakers to a solid concrete
wall or plaster board wall only!
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Hook the main unit and speakers in place.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX®
13 Glossary
The DivX® codec is a patent-pending, MPEG-4
based video compression technology developed
by DivX®, Inc. It can shrink the file size of digital
video and still maintain the high visual quality.
A
Dolby Digital Pro Logic II
Analog audio
An advanced, matrix decoding technology
that expands any two channel audio, such as
CDs and stereo encoded videocassettes, video
games andTV broadcasts to a five channel full
bandwidth (range) playback (Left/Center/Right/
Left Surround/Right Surround), resulting in a
surround sound experience.
Sound that has not been turned into numbers.
Analog sound is available when you use the
AUDIO LEFT/RIGHT.These red and white jacks
send audio through two channels, the left and
right.
Aspect ratio
Aspect ratio refers to the length to height ratio
ofTV screens.The ratio of a standardTV is 4:3,
while the ratio of a high-definition or wideTV
is 16:9.The letter box allows you to enjoy a
picture with a wider perspective on a standard
4:3 screen.
E
EasyLink
Philips Easylink complies to the HDMI
CEC industry standard protocal to share
functionalities between this unit and its
connected devices.This feature is only available
if you connect this unit to a HDMI compliant
device with a HDMI cable.
AUX
Auxiliary input that allows you to connect
portable audio devices.
C
H
Composite video (CVBS)
HDCP
A single video signal commonly used in most
consumer video products.
High-bandwidth Digital Content Protection.
This is a specification that provides a secure
transmission of digital contents between
different devices (to prevent unauthorized
copyright.)
D
Digital Audio
Digital Audio is a sound signal that has been
converted into numerical values. Digital sound
can be transmitted through multiple channels.
Analog sound can only be transmitted through
two channels.
HDMI
High-Definition Multimedia Interface is a
high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
Disc menu
A screen display that allows election of images,
sounds, subtitles, multi-angles, etc., recorded on
a DVD.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in noVideo or Audio output.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
J
S
JPEG
Surround
A very common digital still picture format.A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in
spite of its high compression ratio. Files are
recognized by their file extension ‘.jpg’ or ‘.jpeg.’
A system that creates realistic, three-
dimensional sound fields. It is usually achieved
with multiple speakers that are arranged around
the listener.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3.With the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD.
P
Parental control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country.The limitation
varies from disc to disc; when it is activated,
playback will be prohibited if the software’s level
is higher than the user-set level.
PBC
Playback Control.A system where you navigate
through aVideo CD/SuperVCD with on-screen
menus that are recorded onto the disc.You can
enjoy interactive playback and search.
Progressive scan
The progressive scan displays twice the number
of frames per second than in an ordinaryTV
system. It offers higher picture resolution and
quality.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: HSB2351_51_UM_V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|