BDL4620QL
User Manual (English)
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
CAUTION:
These servicing instructions are for use by qualified
Important Safety Instructions
service personnel only.To reduce the risk of electric
shock,do not perform any servicing other than that
contained in the operating instructions unless you are
qualitified to do so.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
CAUTION:
Excessive sound pressure from earphones and
headphones can cause hearing loss.Adjustment of the
equalizer to maximum increases the earphone and
headphone output voltage and the sound pressure level.
Therefore, to protect your hearing, adjust the equalizer
to an appropriate level.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
For UL/CUL application: For use only with UL Listed Wall Mount
Bracket with minimum weight/load: 41.1 kg.
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug.A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third grounding
prong.The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
For CB application: Unit without base weight: 13.7 kg.The equipment
and its associated mounting means still remain secure during the test.
(Used wall mounting kit: 400 x 400 mm distance by using M6 screws of
20 mm long plus the thickness of the mounting bracket.)
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus.When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING: TO REDUCETHE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS APPARATUSTO
RAIN OR MOISTURE.
WARNING: Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
WARNING: The batteries (batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
WARNING: The mains plug or appliance coupler is used as the
disconnect device,the disconnect device shall remain
readily operable.
WARNING: To prevent the spread of fire, keep candles or other
open flames away from this product at all times.
WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
Federal Communications Commission (FCC)
Notice (U.S. Only)
Regulatory Information
CE Declaration of Conformity
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
We declare under our responsibility that the product is in conformity
with the following standards:
•
•
•
•
EN60065:2002+A1:2006+A11:2008+A2:2010+A12:2011 (Safety
requirement of Audio, video and similar electronic apparatus)
EN55022:2010 (Radio Disturbance requirement of Information
Technology Equipment)
EN55024:2010 (Immunity requirement of InformationTechnology
Equipment)
EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic
Current Emission)
•
•
EN61000-3-3:2008 (Limitation ofVoltage Fluctuation and Flicker)
EN 50581:2012 (Technical documentation for the assessment of
electrical and electronic products with respect to the restriction of
hazardous substances)
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
following provisions of directives applicable:
Use only an RF shielded cable that was supplied with the display when
connecting this display to a computer device.
•
•
•
2006/95/EC (LowVoltage Directive)
2004/108/EC (EMC Directive)
To prevent damage which may result in fire or shock hazard, do not
expose this appliance to rain or excessive moisture.
2009/125/EC (ErP Directive, EC No. 1275/2008, 642/2009
Implementing Directive for Standby and Off mode power
consumption)
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS
OFTHE CANADIAN INTERFERENCE- CAUSING EQUIPMENT
REGULATIONS.
•
•
93/68/EEC (Amendment of EMC and LowVoltage Directive) and is
produced by a manufacturing organization on ISO9000 level.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
2011/65/EU (RoHS 2 Directive)
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
Polish Center forTesting and Certification
Information for U.K. only
Notice
WARNING –THIS APPLIANCE MUST BE EARTHED.
Important:
The equipment should draw power from a socket with an attached
protection circuit (a three-prong socket).All equipment that works
together (computer, display, printer, and so on) should have the same
power supply source.
(B)
The phasing conductor of the room’s electrical installation should have
a reserve short-circuit protection device in the form of a fuse with a
nominal value no larger than 16 amperes (A).
(A)
To completely switch off the equipment, the power supply cable must
be removed from the power supply socket, which should be located
near the equipment and easily accessible.
A protection mark “B” confirms that the equipment is in compliance
with the protection usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
This apparatus is supplied with an approved moulded 13A plug.To
change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved
type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut
off and an appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug
without a fuse is used, the fuse at the distribution board should not be
greater than 5A.
NOTE: The severed plug must be destroyed to avoid a possible shock
hazard should it be inserted into a 13A socket elsewhere.
How to connect a plug
Electric, Magnetic and Electronmagnetic
Fields (“EMF”)
1. We manufacture and sell many products targeted at consumers,
which, like any electronic apparatus, in general have the ability to
emit and receive electromagnetic signals.
2. One of our leading Business Principles is to take all necessary health
and safety measures for our products, to comply with all applicable
legal requirements and to stay well within the EMF standards
applicable at the time of producing the products.
The wires in the mains lead are coloured in accordance with the
following code:
BLUE – “NEUTRAL” (“N”)
BROWN – “LIVE” (“L”)
3. We are committed to develop, produce and market products that
cause no adverse health effects.
GREEN &YELLOW – “EARTH” (“E”)
4. We confirm that if its products are handled properly for their
intended use, they are safe to use according to scientific evidence
available today.
1. The GREEN &YELLOW wire must be connected to the terminal in
the plug which is marked with the letter “E” or by the Earth symbol
or coloured GREEN or GREEN &YELLOW.
5. We play an active role in the development of international EMF and
safety standards, enabling us to anticipate further developments in
standardization for early integration in its products.
2. The BLUE wire must be connected to the terminal which is marked
with the letter “N” or coloured BLACK.
3. The BROWN wire must be connected to the terminal which
marked with the letter “L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead – not simply over the three wires.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
China RoHS
中国电子信息产品污染控制标识要求
仅适用于非热带气候条件下安全使用 :
本产品有毒有害物质或元素的名称及含量标识表：
汉
文 仅适用于非热带气候条件下安全使用。
有毒有害物质或元素
蒙古文
零部件名称
铅
汞
镉
六价铬 多溴联苯 多溴二苯醚
(PBBs)
O
藏
维
文
文
(Pb) (Hg) (Cd) (Cr 6+)
(PBDEs)
塑料外框
后壳
O
O
X
X
X
X
X
O
X
X
X
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Dan hab yungh youq gij dienheiq diuzgen mbouj dwg
diegndat haenx ancienz sawjyungh.
CCFL
LED
O
壮
文
LCD
面板
O
O
O
O
O
O
O
O
O
电源基板
主基板
按键基板
底座
O
O
≤
O
仅适用于海拔2000m以下地区安全使用:
O
汉
文 仅适用于海拔 2000m 以下地区安全使用。
电源线
O
蒙古文
其他线材
遥控器
O
O
藏
文
*：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、
集 成 电 路 、连 接 器 等 。
维
壮
文
○：表示该有害物质在该部件所有均质材料中的含量均在SJ/
T11363-2006《电子信息产品中有毒有害物质的限量要求》规定的
限量要求以下。
文 Hai dou gaxgonq, wngdang sien duenh denvasen bae.
“注意
文 如果电池更换不当会有爆炸危险
只能用同样类型或等效类型的电池来更换”
汉
×：表示该有害物质至少在该部件的某一均质材料中的含量超出
SJ/T11363-2006《电子信息产品中有毒有害物质的限量要求》规定
的限量要求；
备注：以上“×”的部件，部分含有有害物质超过是由于目前行业
技术水平所限，暂时无法实现替代或减量化。
蒙古文
藏
维
文
文
10
在产品本体上标示的该标志表示环境保护使用期限为 年。
环保使用期限
10
电子信息产品的环境保护使用期限是指电子信息产品中所含的有
毒有害物质或元素不会向外部泄漏或出现突然变异，并且电子信
息产品的用户在使用该电子信息产品时也不会对环境造成严重污
染或对人体、财产带来严重损害的期限。
“Louzsim
Danghnaeuz denyouz vuenh ndaej mbouj habdangq aiq miz
壮
汉
文 gij yungyiemj fatseng bauqcaq
在环境保护期限中，请按照使用说明书使用本产品。
本环境保护使用不覆盖易损件：电池。
Cijndaej yungh gij denyouz doengzyiengh loihhingz roxnaeuz
daengjyauq loihl haenx vuenh”
“接入本设备的有线网络天线必须与保护接地隔离 , 不
然可能会引起着火等危险 !”
《废弃电子产品回收处理管理条例》提示性说明
文
为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命
终止时，请遵守国家废弃电器电子产品回收处理相关法律规定，
将其交给当地具有国家认可的回收处理资质的厂商进行回收处
理。
蒙古文
藏
文
文
维
壮
“Gij mizsienq vangjloz denhsen ciephaeuj bonj sezbi daeuj
文 haenx itdingh aeu caeuq gij ciepdieg baujhoh doxliz, mboujne
aiq miz gij yungyiemj dawzfeiz daengj!”
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
North Europe (Nordic Countries)
Information
End-of-Life Disposal
Your new Public Information Display contains materials that can be
recycled and reused. Specialized companies can recycle your product to
increase the amount of reusable materials and to minimize the amount
to be disposed of.
Placering/Ventilation
VARNING:
Please find out about the local regulations on how to dispose of your
old display from your local Philips dealer.
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG
ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING
PÅPLATS.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance
to local-state and federal regulations. For additional information on
Placering/Ventilation
ADVARSEL:
Waste Electrical and Electronie Equipment-
WEEE
SØRGVED PLACERINGEN FOR,AT NETLEDNINGENS STIK OG
STIKKONTAKT ER NEMTTILGÆNGELIGE.
Attention users in European Union private households
Paikka/Ilmankierto
This marking on the product or on its packaging
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic appliances,
this product may not be disposed of with normal
household waste.You are responsible for disposal of
this equipment through a designated waste electrical
and electronic equipment collection.To determine
the locations for dropping off such waste electrical
and electronic, contact your local government office,
the waste disposal organization that serves your
household or the store at which you purchased the
product.
VAROITUS:
SIJOITA LAITE SITEN, ETTÄVERKKOJOHTOVOIDAAN
TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT
KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
End of Life Directives-Recycling
Your new Public Information Display contains several
materials that can be recycled for new users.
Please dispose of according to all Local, State, and
Federal laws.
As an ENERGY STAR Partner, we have determined
that this product meets the ENERGY STAR guidelines
for energy efficiency.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
Table Of Contents
1. Unpacking and Installation.....................................1
1.1. Unpacking.....................................................................1
1.2. Package Contents.....................................................1
1.3. Installation Notes......................................................1
1.4. Mounting on a Wall.................................................2
5.2. Settings........................................................................13
5.2.1. Picture menu............................................13
5.2.2. Sound menu.............................................14
5.2.3. General settings menu........................15
5.3. Network Settings...................................................15
2. Parts and Functions.................................................3
2.1. Control Panel..............................................................3
2.2. Input/OutputTerminals.........................................4
2.3. Remote Control........................................................5
2.3.1. General functions.....................................5
6. Input mode..............................................................16
7. Pixel Defect Policy.................................................17
7.1. Pixels and Sub-pixels............................................17
7.2. Types of Pixel Defects +
Dot Definition.........................................................17
2.3.2. Inserting batteries in the remote
control.............................................................6
7.3. Bright Dot Defects...............................................17
7.4. Dark Dot Defects.................................................18
7.5. Proximity of Pixel Defects................................18
7.6. Pixel DefectTolerances......................................18
7.7. MURA..........................................................................18
2.3.3. Handling the remote control.............6
2.3.4. Operating range of the remote
control.............................................................6
3. Connection...............................................................7
3.1. Connecting External Equipments....................7
3.2. Connecting Multiple Displays............................8
8. Cleaning andTroubleshooting.............................19
8.1. Cleaning......................................................................19
8.2. Troubleshooting......................................................20
3.2.1. RS232C control connection
(optional).......................................................8
9. Technical Specifications........................................21
3.2.2. IR connection (optional)......................8
3.3. IR Pass-through Connection (optional).......8
(optional).......9
3.4. Wire-connecting to Network
4. Operation................................................................10
4.1. Watch the ConnectedVideo Source.........10
4.2. Change Picture Format......................................10
4.3. Select your Preferred Picture Settings.......10
4.4. Select your Preferred Sound Settings........10
4.5. Play Multimedia Files............................................10
4.5.1. Play files from computer...................10
4.5.2. Play multimedia files from USB
device...........................................................11
4.6. Play options...............................................................11
4.6.1. Playing music files..................................11
4.6.2. Playing movie files.................................12
4.6.3. Playing photo files.................................12
5. Change your settings............................................13
5.1. Quick Picture and Sound..................................13
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
1.
Unpacking and Installation
1.1. Unpacking
•
•
•
•
This product is packed in a carton, together with the standard accessories.
Any other optional accessories will be packed separately.
Due to the size and weight of this display it is recommended for two people to move it.
After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
•
•
•
•
•
•
•
LCD display
CD ROM
Remote control with AAA batteries
Power cord (1.8 m)
VGA cable (1.8 m)
RS232 cable (1.8 m)
Quick start guide
CD ROM
LCD Display
LCD-Display
Wyświetlacz LCD / ЖК-монитор
/
Pantalla LCD
/
Écran LCD
/
/
监视器
Display LCD
/
/
LCD Ekran
/
監視器
BDL4620QL
Remote Control
and AAA Batteries
Kurzanleitung
Instrukcja szybkiego uruchomienia
Hızlı başlangiç kılavuzu 快速入门指南
Installation Instalación Installation
Kurulum 安装 安裝
/
Guía rápida
/
Guide de démarrage rapide
Краткое руководство по запуску
快速入門指南
Installazione
/
Guida rapida
/
/
/
/
/
Installation
Установка
/
/
/
/
/
Instalacja
/
/
/
/
Connect /Verbindungsfähigkeit
/
Conectividad
连接性
/
/
Connectivité
連接性
/
Connettività
/
Połączenia Подключение Bağlantı
/
/
/
Register your product and get support at
* The supplied power cord varies depending on destination.
Quick Start Guide
For EU
For China
For North America
For UK
RS232 Cable
VGA Cable
NOTES:
•
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country.
•
Keep the package box and packing material for shipping the display.
1.3. Installation Notes
•
Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your
service agent.
•
The product should be installed on a flat surface to avoid tipping.The distance between the back of the product and the wall should be maintained
for proper ventilation.Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life
of the electronic components.
•
The product can normally operate only under 2000 m in altitude. In installations at altitudes above 2000 m, some abnormalities may be experienced.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
1.4. Mounting on aWall
To mount this display to a wall, you will have to obtain a standard wall-mounting kit.We recommend using a mounting interface that complies with
UL1678 standard in North America.
400
Protective Sheet
400
Table
1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the
screen face.
2. Ensure you have all accessories for mounting this display.
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment
or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (20 mm long plus the thickness of the mounting bracket) and tighten them securely.
Caution:
To prevent the display from falling:
•
To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the
bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
100 mm
100 mm
100 mm
100 mm
NOTE: When installing the display on a wall, please consult a professional technician for proper installation.We accept no liability for installations not
performed by a professional technician.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
2.
Parts and Functions
2.1. Control Panel
1
2
3
4
5
6
7
8
1
8
[
] button
Remote control sensor and power status indicator
Press to switch the display on or off.
•
Receives command signals from the remote control.
- Lights green when this display is turned on
2
3
4
[
] button
- Lights red when this display is in standby mode
Press to select input source.
- Lights off when the main power of this display is turned off
[
] button
Press to access the OSD menu.
[
] button
Press to move the highlight bar up to adjust the selected item while
OSD menu is on.
5
6
7
[
] button
Press to move the highlight bar down to adjust the selected item
while OSD menu is on.
[ ] button
Press to increase the adjustment while OSD menu is on, or to
increase the audio output level while OSD menu is off.
[ ] button
Press to decrease the adjustment while OSD menu is on, or to
decrease the audio output level while OSD menu is off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
2.2. Input/OutputTerminals
16
15
14
13
2
1
12
11
10
9
8
Y
Pb
Pr
5
6
3
4
7
11
12
1
SPDIF OUT
Digital audio signal output to connect your external AV device.
AC IN
AC power input.
13
2
IR OUT /
IR IN (3.5 mm)
MAIN POWER SWITCH
IR signal output/input for the loop-through function.
Main power on/off switch.
NOTES:
3
HDMI IN
HDMI video/audio input.
•
This display’s remote control sensor will stop working if the jack
[IR IN] is connected.
4
DVI IN
DVI-D video input.
•
To remotely control your A/V device via this display, refer to
5
14
16
15
RJ-45
RS232C OUT /
RS232C IN (2.5 mm)
LAN control function for the use of remote control signal from
RS232C network output/input for the loop-through function.
control center.
USB PORT
Connect your UBS storage device.
6
7
VGA IN (D-Sub)
VGA video input.
COMPONENT IN (RCA)
ComponentYPbPr video source input.
8
AUDIO IN (RCA)
Audio input from external AV device.
9
AUDIO OUT (RCA)
Audio signal output to connect your external AV device.
10
AUDIO IN (3.5mm)
Audio input from your PC.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
7
8
9
button
Confirm an entry or selection.
2.3. Remote Control
2.3.1. General functions
ADJUST button
Access currently available options, picture and sound menus.
BACK button
Return to the previous menu page or exit from the previous
function.
1
2
10
11
12
13
14
15
16
VOLUME button
Adjust volume.
3
4
14
15
MUTE button
Press to turn the mute function on/off.
COLOR buttons
5
Select tasks or options.
NUMERIC buttons
Enter text for network setting.
6
7
8
FORMAT button
Change picture format.
16
10
INFO button
Display information about current activity.
9
OPTIONS
Access currently available options, picture and sound menus.
10
11
12
13
1
POWER button
Switch this display on or off.
2
PLAY buttons
Control playback of media files.
3
SOURCE button
Select input source. Press [ ] or [ ] button to select from USB,
Network, HDMI, DVI, YPbPr, AV, or VGA. Press [
] button
to confirm and exit.
4
5
6
HOME button
Access the OSD menu.
LIST
No function.
NAVIGATION buttons
Navigate through menus and select items.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
2.3.2. Inserting batteries in the remote control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (–) indications inside the
battery compartment.
3. Replace the cover.
Caution:
The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions:
•
•
•
•
Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment.
Do not mix battery types.
Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.
Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can
damage your skin.
NOTE: If you do not intend to use the remote control for a long period, remove the batteries.
2.3.3. Handling the remote control
•
•
•
•
Do not subject to strong shock.
Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.
Avoid exposure to heat and steam.
Other than to install the batteries, do not open the remote control.
2.3.4. Operating range of the remote control
Point the front of the remote control toward this display’s remote control sensor when
pressing a button.
Use the remote control within a distance of less than 10m/33ft from this display’s sensor,
and a horizontal and vertical angle of less than 30 degrees.
NOTE: The remote control may not function properly when the remote control sensor
on this display is under direct sunlight or strong illumination, or when there is an
obstacle in the path of signal transmission.
30
30
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
3.
Connection
NOTE: The peripherals and cables shown are for example purposes only.
3.1. Connecting External Equipments
USB
PC
USB
AUDIO IN
STEREO AMPLIFIER
COMPONENT OUT (YPbPr)
AUDIO OUT
DVD / VCR / VCD
HDMI OUT
R
L
R
L
AC IN
Y
Pb Pr
HDMI IN
DVI IN
RJ-45
VGA IN
COMPONENT IN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
3.2. Connecting Multiple Displays
3.2.1. RS232C control connection (optional)
DISPLAY 1
DISPLAY 2
[RS-232C]
PC
[RS232C IN]
[RS232C OUT]
[RS232C IN]
[RS232C OUT]
3.2.2. IR connection (optional)
DISPLAY 1
DISPLAY 2
External
IR Receiver
[IR IN]
[IR OUT]
[IR IN]
[IR OUT]
NOTE: This display’s remote control sensor will stop working if the [IR IN] is connected.
3.3. IR Pass-through Connection (optional)
[IR OUT]
DISPLAY
DVD / VCR / VCD
[IR IN]
(DVD / VCR / VCD)
Remote Control
(BDL4620QL)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
(optional)
3.4. Wire-connecting to Network
If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files (Page 10) for more
detail.
INTERNET
ROUTER
[RJ-45]
[RJ-45]
PC
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press
button on the remote control, then select {Setup}.
button.
4. Select {Connect to network}, then press
5. Follow the on-screen instructions to install the network.
6. Wait for this display to find the network connection.
7. If you are prompted, agree to the “End User Licence Agreement”.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
•
•
{Game}: Ideal settings for games.
4.
Operation
{News}: Ideal settings for spoken audio, such as the news.
NOTE: The control button described in this section is mainly on the
remote control unless specified otherwise.
4.5. Play Multimedia Files
You can play videos, photos, and music on your display from:
4.1. Watch the ConnectedVideo Source
•
•
Your computer connected through your home network.
A USB device connected to this display.
1. Press
2. Press
button.
or
button to select a device, then press
button.
4.5.1. Play files from computer
To play files from computer, you will need:
4.2. Change Picture Format
You can change the picture format to suit the video source. Each video
source has its available picture formats.
•
A wired home network, connected with a Universal Plug and Play
(uPnP) router.
•
Optional:A LAN cable that connects your display to your home
network.
The available picture formats depend on the video source:
1. Press
button.
•
•
A media server running on your computer.
Appropriate settings on your computer firewall to allow you to run
2. Press or button to select a picture format, then press
button.
the media server.
•
{Auto zoom}: Enlarge the picture to fill the screen.
Recommended for minimal screen distortion but not for HD or
PC.
Set up the network
1. Connect your display and the computer to the same home network.
•
•
•
•
{Movie expand 16:9}: Scale 4:3 format to 16:9. Not
recommended for HD or PC.
2. Switch on your computer and the router.
{Wide screen}: Shows widescreen format content unstretched.
Not recommended for HD or PC.
NOTE: If the apparatus does not return to DLNA mode due to
external electrical disturbances (e.g. electrostatic discharge), user
intervention is required.
{Unscaled}: Provide maximum detail for PC. Only available
when PC mode is selected in the {Picture} menu.
Set up media sharing
{4:3}: Display the classic 4:3 format.
1. Install a media server on your computer to share media files.These
are some media servers:
4.3. Select your Preferred Picture Settings
1. While this display is playing video source, press
button.
•
•
For PC:Windows Media Player 11 (or higher) orTVersity
For Mac:Twonky
2. Switch on media sharing on your computer using the media server.
For more information on how to set up the media server, refer to
the website of the media server.
2. Press
or
, then press
3. Press or button to select an option, then press
button to select
button.
button:
Play files
•
•
•
•
{Personal}:Apply your personalised picture settings.
{Vivid}: Rich and dynamic settings, ideal for daytime viewing.
{Natural}: Natural picture settings.
1. Press
button.
2. Select [Browse network], then press
button.
3. Select a file from the content browser, then press
button to
{Standard}: Default settings that suit most environments and
start playing.
types of video.
4. Press the Play buttons on the remote control to control playing.
•
•
•
{Movie}: Ideal settings for movies.
{Photo}: Ideal settings for photos.
Tips:
{Energy saving}: Settings that conserve the most energy.
•
•
Select the top bar to filter your files by type.
Select [Sort] to arrange the files by album name, artist, or other
fields.
4.4. Select your Preferred Sound Settings
1. While this display is playing video source, press
button.
•
To clear the list of offline media servers, press
button, then select [Clear offline servers] and press
button.
2. Press
or
, then press
3. Press or button to select an option, then press
button to select
button.
button:
•
•
{Personal}:Apply your personalised sound settings.
{Original}: Settings that suit most environments and types of
audio.
•
•
{Movie}: Ideal settings for movies.
{Music}: Ideal settings for listening to music.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
•
Do not overload the USB port. If you connect a USB storage
device that consumes more than 500mA power, make sure that it is
connected to its own external power supply.
4.5.2. Play multimedia files from USB device
This display can play music, movie, or photo files from your USB device.
1. Connect your USB device to the USB port on this display.
4.6. Play options
USB
4.6.1. Playing music files
1. Select Music in the top bar.
2. Select one music track, then press
button.
1. Funky music
05:05
2. Press
button, select USB, then press
button.
Info
Play All
Sort
USB device
Help
Options
3. The connected USB device is detected automatically for all its
playable files, which will be automatically sorted into 3 types:
•
To play all the tracks in a folder, select one music file, then select
{Play All}.
,
, and
.
•
•
To skip to the next or previous track, press
button.
or
To pause the track, press
resume playback.
button. Press
button again to
To skip backward or forward 10 seconds, press or
button.
•
•
To search backward or forward, press or button,
G
J
press repeatedly to toggle between different speeds.
•
To stop the music, press button.
H
Music options
While you play music, press
button to select an option:
button, then press
Help
•
•
•
{Repeat}: Select {Repeat} to play a track or an album repeatedly, or
select {Play once} to play a track once.
4. Press the
Press
BACK button to go up to the top layer in the screen.
button to select the file type. Press button to enter
{Media Server}:When you play content from a media server, you
can select another media server.
its play list.
5. Select the file you want. Press
6. Follow the on-screen instruction to control the play option.
button to start playing.
{Shuffle On} / {Shuffle Off}: Enable or disable random play of tracks.
NOTE: To view information about a song (for example, title, artist or
duration), select the song, then press button.To hide
the information, press button again.
7. Press the PLAY buttons (
) to control playing.
H F G I J
Supported file system:
•
FAT32
Supported file format:
•
•
•
Music: MP3,WMA, M4A,AAC,AC3
Movie:AVI, MP4, MOV, MPG/MPEG
Photo: JPEG, BMP, GIF
Caution:
•
The manufacturer is not responsible if the USB device is not
supported, nor is it responsible for damage to or loss of data in the
device.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
4.6.2. Playing movie files
4.6.3. Playing photo files
1. Select Photo
in the top bar.
1. Select Movie
in the top bar.
2. Select a photo thumbnail, then press
button.
2. Select a video, then press
button.
The Movie
11:22:33
The Movie
11:22:33
The Movie
11:22:33
88.88MB
2013-05-05
88.88MB
2013-05-05
88.88MB
2013-05-05
The Movie
11:22:33
The Movie
11:22:33
88.88MB
2013-05-05
88.88MB
2013-05-05
Info
Play All
Sort
USB device
Help
Options
Info
Play All
USB device
Help
Options
•
To play all the videos in a folder, select one video file, then select
{Play All}.
Start a slideshow
If there are multiple photos in a folder, select a photo, then select {Play
All}.
•
•
To skip to the next or previous video, press
button.
or
To skip to the previous or next photo, press or
then press button.
To stop the slideshow, press
button, and
•
To pause the video, press
resume playback.
button. Press
button again to
•
button.
H
To skip backward or forward 10 seconds, press or
button.
•
•
Slideshow options
To search backward or forward, press or button,
G
J
press repeatedly to toggle between different speeds.
While you play a slideshow, press
button to select an option:
button, then press
•
To stop the video, press button.
H
•
•
•
•
•
{Shuffle Off} / {Shuffle On}: Enable or disable random display of
pictures in the slideshow.
Movie options
While playing video, press
button to select an option:
button, then press
{Repeat}: Select {Repeat} to watch a slideshow repeatedly or {Play
once} to watch once.
•
•
•
•
•
{Subtitles}: Select the available subtitle settings.
{SlideshowTime}: Select the displaying time for each photo in the
slideshow.
{Subtitle Language}: Select the language for subtitles if available.
{Character Set}: Select the correct character set for the subtitles.
{Audio Language}: Select an audio language.
{SlideshowTransitions}: Select the transition from one photo to the
next.
{Media Server}:When you play content from a media server, you
can select another media server.
{Repeat}: Select {Repeat} to play the video file repeatedly or {Play
once} to play the video file once.
•
•
•
{Media server}:When you play content from a media server, you
can select another media server.
{Shuffle On} / {Shuffle Off}: Enable or disable random play of video
files.
{DivX(R)VOD}: Display the DivX registration and deregistration
codes for this display.
NOTE: To view information about a video (for example, played position,
duration, title, or date), select the video, then press
button.To hide the information, press
button again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
Using this display’s control buttons:
5.
Change your settings
Using the remote control:
1. Press
button to display the OSD menu.
1. Press
Press , or
button to display the OSD menu.
button to select {Setup}. Press button to enter.
2. Press[ ] [ ] [ ] or [ ] button to select menu item or adjust its
value.
2.
3. Press
submenu.
4. Press
button to confirm menu selection and enter its
button to exit the OSD menu.
5.1. Quick Picture and Sound
You can select picture and sound settings with the help of the settings
assistant, which demonstrates the effect of your chosen setting
immediately.
Source
Setup
1. Press
2. Select {Setup}. Press
3. Select {Quick picture and sound}. Press
4. Select {Continue}, then press button
button to display the OSD menu.
button.
Press , , , or
button to select {Quick picture and sound},
3.
button.
{Settings}, {Connect to network}, or {Network settings}. Press
button to enter.
5. Follow the on-screen instructions to choose your preferred settings.
5.2. Settings
5.2.1. Picture menu
Quick picture and
Connect to network
sound
Picture
Picture style
Sound
Restore style
Settings
Network settings
General settings
Backlight contrast
Colour
Sharpness
Press , , , or
value. Press
button to select its menu item or to adjust its
button to confirm.
4.
Noise reduction
MPEG artifact reducti...
Digital Crystal Clear
Advanced
5. Press
6. Press
button to go back to the previous menu layer.
button to exit the OSD menu.
Game or computer
Foramat and edges
Picture style
Select a predefined picture setting.
Restore style
Restore the last-selected predefined picture setting.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
Backlight contrast
5.2.2. Sound menu
Adjust the brightness of this display’s backlight.
Colour
Picture
Sound style
Adjust the colour saturation of the picture.
Sound
Restore style
Bass
General settings
Sharpness
Treble
Adjust the sharpness of the picture.
Surround mode
Audio out
Advanced
Noise reduction
Select the amount of noise reduction for the picture.
MPEG artifact reduction
Smoothen transitions and haziness in the digital picture.
Digital Crystal Clear
Fine-tune each pixel to match surrounding pixels and produce a brilliant,
high-definition image.
•
•
•
•
{Advanced sharpness}: Enable superior sharpness, especially on
lines and contours in the picture.
Sound style
Access predefined sound settings.
{Dynamic contrast}: Dynamically enhance the details in the
dark, medium and light areas of the picture.
Restore style
Restore the last-selected predefined sound setting.
{Dynamic backlight}: Select a backlight level to optimise dynamic
power consumption and picture contrast.
Bass
{Colour enhancement}: Dynamically enhance the vividness and
details of colours.
Adjust the bass level of the speaker and headphones.
Treble
Advanced
Adjust the treble level of the speaker and headphones.
Access advanced settings such as gamma, tint settings and video contrast
settings.
Surround mode
Select a surround sound mode to enhance your audio experience.
•
{Gamma}:Adjust the non-linear setting for picture luminance
and contrast.
Audio out
•
•
{Tint}: Change the colour balance.
Adjust audio output volume.
{Custom tint}: Customise colour balance setting. Only available
Advanced
if {Tint}
{Custom} is selected.
Access advanced settings to enhance your audio experience.
•
•
{Video contrast}:Adjust video contrast.
•
{Auto volume leveling}: Enable the reduction of sudden volume
{Brightness}:Adjust screen brightness.
changes.
Game or computer
•
•
•
{Speaker settings}:Turn on or off the internal speakers.
When viewing content from a connected game console, select {Game}
to apply game settings.When a computer is connected through HDMI,
select {Computer}.
{Clear sound}: Enhance sound quality.
{Audio out format}: Select the type of audio output through
the digital audio output connector.
Make sure that {Format and edges}
is selected so as to view maximum detail.
{Picture format}
{Unscaled}
•
{Audio out leveling]: Set the output level for stereo audio.
Select {Less} for a certain amount of loss in intensity or signal
strength. Select {More} for no loss in intensity or signal strength.
Format and edges
•
•
{Audio out delay}:Automatically sync the image on this display
to the audio from a connected home theatre.
Access advanced settings to control the displaying format of the picture.
•
•
•
{Picture format}: Change the picture format.
{Screen edges}: Change the picture size.
{Audio out offset}:Adjust the setting for audio output delay.
Available if {Audio out delay} is switched on.
{Picture shift}: If available, move the position of the picture.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
•
•
{Lock but volume}: Disable all the button function except the
5.2.3. General settings menu
button.
{Lock but power}: Disable all the button function except the
Picture
Menu language
Monitor id
button.
Sound
NOTE: To disable the lock function from [Local KB lock] or [RC
lock] item, press buttons 1 9 9 8 on the remote control.
General settings
Eco mode
Auto search
Clock
Factory settings
USB scheduling
Sleep timer
Auto switch off
Local KB lock
RC lock
Reset all your customized settings to the factory defaults.
5.3. Network Settings
View network settings
Network settings
Factory settings
Static IP Configuration
Digital Media Renderer ..
Menu language
Select language used for OSD menus.
Monitor id
Set the ID number for controlling this display via the RS232C
connection. Each display must have a unique ID number when multiple
sets of this display are connected.
Eco mode
Set this display to reduce the power consumption automatically.
Auto search
View network settings
Choose to let this display detect and display available signal sources
automatically.
View connected network status.
Network settings
Clock
Select how this display should assign addresses to the network
resources.
Adjust clock settings.
USB scheduling
Static IP Configuration
This function allows you to program up to 3 different scheduled time
intervals for this display to activate, and auto play USB media file of your
setting.
Assign {IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for
this display.
Digital Media Renderer - DMR
After changing the {Clock} option in the {General settings} menu, you need
to set this {USB scheduling} again.
Receive multimedia files from Smart Phones orTablets connected to
your network.
Sleep timer
Switch off this display after a specified time.
Auto switch off
Set the time for this display to be switched off after a period of no
activity. Press any key on the remote control to disable this function.
Local KB lock
Choose to enable or disable the keyboard (control buttons) function of
this display.
•
•
•
{Unlock}: Enable the keyboard function.
{Lock all}: Lock all keyboard function.
{Lock but volume}: Disable all the keyboard function except the
and
button.
•
{Lock but power}: Disable all the keyboard function except the
button.
RC lock
Choose to enable or disable the button function of the remote control.
•
•
{Unlock}: Enable the button function.
{Lock all}: Lock all button function.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
6.
Input mode
PC Resolution:
Active Resolution
Standard
Resolution
Refresh Rate
Pixel Rate
Aspect Ratio
4:3
Stand for Mode
H Pixels
V Lines
480
480
480
400
600
600
768
768
768
800
1024
768
1200
1080
60 Hz
72 Hz
75 Hz
70 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
25.175 MHz
31.5 MHz
31.5 MHz
33.75 MHz
40 MHz
VGA
640
Video Graphic Array
WVGA
SVGA
720
800
16:9
4:3
WideVideo Graphic Array
SuperVGA
49.5 MHz
65 MHz
XGA
1024
4:3
Extended Graphic Array
78.75 MHz
79.5 MHz
79.5 MHz
108 MHz
85.5 MHz
162 MHz
148.5 MHz
WXGA
WXGA
SXGA
1280
1280
1280
1360
1600
1920
5:3
16:10
5:4
Wide XGA
Wide XGA
Super XGA
Wide XGA
Ultra XGA
HD1080
WXGA
UXGA
HD1080
16:9
4:3
16:9
SDTV Resolution:
Active Resolution
Standard
Resolution
Refresh Rate
Pixel Rate
Aspect Ratio
Stand for Mode
H Pixels
V Lines
480i
480p
576i
29.97 Hz
59.94 Hz
25 Hz
13.5 MHz
27 MHz
720
480
4:3
4:3
Modified NTSC Standard
Modified PAL Standard
13.5 MHz
27 MHz
720
480
576p
50 Hz
HDTV Resolution:
Active Resolution
Standard
Resolution
Refresh Rate
Pixel Rate
74.25 MHz
74.25 MHz
148.5 MHz
Aspect Ratio
16:9
Stand for Mode
H Pixels
V Lines
50 Hz
60 Hz
25 Hz
30 Hz
50 Hz
60 Hz
720p
1080i
1080p
1280
720
Normally DVB Mode
Normally ATSC Mode
Normally ATSC Mode
1920
1920
1080
1080
16:9
16:9
•
•
•
•
The PC text quality is optimum in HD 1080 mode (1920 × 1080, 60 Hz).
Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows).
Check your PC instruction book for information about connecting your PC to a display.
If a vertical and horizontal frequency-select mode exists, select 60 Hz (vertical) and 31.5 KHz (horizontal). In some cases, abnormal signals (such as
stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the [
video mode.Also, make sure that the PC is connected.
] button to enter the
•
•
•
•
When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.
This display settings table complies to the IBM/VESA standards, and based on the analog input.
The DVI support mode is regarded as same to the PC support mode.
The best timing for the vertical frequency to each mode is 60 Hz.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
7.
Pixel Defect Policy
We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality
control. However, pixel or sub-pixel defects on the PDP /TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can
guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects
will be repaired during the warranty period in line with your local guarantee conditions.
This notice explains the different types of pixel defects and defines the acceptable defect level for the LCD screen. In order to qualify for repair under
warranty, the number of pixel defects must exceed a certain level as shown in the reference table. If the LCD screen is within specification a warranty
exchange / claim back will be refused.Additionally, because some types or combinations of pixel defects are more noticeable than others, Philips sets even
higher quality standards for those.
7.1. Pixels and Sub-pixels
A pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and
subpixel
blue. Many pixels together form an image.When all sub-pixels of a pixel are lit, the three colored
sub-pixels together appear as a single white pixel.When all are dark, the three colored sub-pixels
together appear as a single black pixel. Other combinations of lit and dark sub-pixels appear as
single pixels of other colors.
pixel
7.2. Types of Pixel Defects + Dot Definition
Pixel and sub-pixel defects appear on the screen in different ways.There are three categories of pixel defects and several types of sub-pixel defects within
each category.
Dot definition =What is a defective “Dot”? :
One or more defective, adjacent sub-pixel are defined as one “dot”.The no. of defective sub-pixels are not relevant to define a defective dot.This means
that a defective dot can consist of one, two or three defective sub-pixels which can be dark or lit.
R G B
One dot = One Pixel; consists of three sub-pixels of Red, Green, and Blue.
7.3. Bright Dot Defects
Bright dot defects appear as pixels or sub-pixels that are always lit or “on”.These are the examples of bright dot defects:
One lit red, green or blue sub pixel
Two adjacent lit sub pixels:
Red + Blue = Purple
Three adjacent lit sub pixels (one white pixel)
Red + Green =Yellow
Green + Blue = Cyan (Light Blue)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
7.4. Dark Dot Defects
Black dot defects appear as pixels or sub-pixels that are always dark or “off”.These are the examples of black dot defects:
One dark dot
Two adjacent dark dots = 1 pair of dark dots
Two dark dots, specifications defines the
minimum distance between dark dots
7.5. Proximity of Pixel Defects
Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the
proximity of pixel defects. In the table below you can find specifications about:
•
•
•
Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots)
Minimum distance between dark dots
Total no. of all defective dots
7.6. Pixel DefectTolerances
In order to qualify for repair due to pixel defects during the warranty period, a PDP /TFT panel in a Philips Plasma / LCD- display must have pixel or sub-
pixel defects exceeding the tolerances listed in the following table.
BRIGHT DOT EFFECT
1 lit sub pixel
ACCEPTABLE LEVEL
2
BLACK DOT EFFECT
1 dark sub pixel
ACCEPTABLE LEVEL
10
12
TOTAL DOT DEFECTS OF ALLTYPES
NOTE: * 1 or 2 adjacent sub pixel defects = 1 dot defect
7.7. MURA
Dark spots or patches may occasionally appear on some liquid crystal display (LCD) panels.This is known within the industry as Mura, which is a Japanese
term for “unevenness.” It is used to describe an irregular pattern or area in which uneven screen uniformity appears under certain conditions. Mura is a
result of the deterioration of the liquid crystal alignment layer and is most commonly caused by long-term operation under high ambient temperatures. It
is an industry- wide phenomenon and Mura is not repairable. It is also not covered by our warranty terms.
Mura has been around since the introduction of LCD technology and with screens getting bigger and in operation 24/7, many displays are running in low
light conditions.This all adds to the possibility of Mura affecting displays.
HOWTO SPOT MURA
There are many symptoms of Mura and also multiple causes. Several of these are listed below:
•
•
•
•
•
•
Impurities or foreign particles in the crystal matrix
Uneven distribution of LCD matrix during manufacturing
Non-uniform luminance distribution of the backlight
Panel assembly induced stress
Flaws within the LCD cells
Thermal induced stress – high temperature operation over long periods of time
HOWTO AVOID MURA
Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods:
•
•
•
Lower the backlight brightness
Use a screen saver
Reduce the ambient temperature around the unit
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
8.
Cleaning andTroubleshooting
8.1. Cleaning
CautionWhen Using the Display
•
Do not bring your hands, face or objects close to the ventilation holes of the display.The top of the display is usually very hot due to the high
temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too
close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself.
•
•
Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire
or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure.
Front Panel Cleaning Instructions
•
•
The front of the display has been specially treated.Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth.
If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution.Wring the cloth to remove excess liquid.Wipe the surface of
the display to remove dirt.Then use a dry cloth of the same type to dry.
•
•
Do not scratch or hit the surface of the panel with fingers or hard objects of any kind.
Do not use volatile substances such as insert sprays, solvents and thinners.
Cabinet Cleaning Instructions
•
•
If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution.Wring the cloth to remove as much moisture as possible.Wipe
the cabinet. Use another dry cloth to wipe over until the surface is dry.
•
Do not allow any water or detergent to come into contact with the surface of the display. If water or moisture gets inside the unit, operating
problems, electrical and shock hazards may result.
•
•
•
Do not scratch or hit the cabinet with fingers or hard objects of any kind.
Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet.
Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
8.2. Troubleshooting
Symptom
Possible Cause
Remedy
No picture is displayed
1. The power cord is disconnected.
1. Plug in the power cord.
2. The main power switch on the back of the
display is not switched on.
2. Make sure the power switch is switched on.
3. Connect a signal connection to the display.
3. The selected input has no connection.
4. The display is in standby mode.
Interference displayed on the display or audible Caused by surrounding electrical appliances or
Move the display to another location to see is the
interference is reduced.
noise is heard
fluorescent lights.
Color is abnormal
The signal cable is not connected properly.
Make sure that the signal cable is attached firmly
to the back of the display.
Picture is distorted with abnormal patterns
1. The signal cable is not connected properly.
1. Make sure that the signal cable is attached
firmly.
2. The input signal is beyond the capabilities of
the display.
2. Check the video signal source to see if it
is beyond the range of the display. Please
verify its specifications with this display’s
specification section.
Display image doesn’t fill up the full size of the The zoom mode is not correctly set.
screen
Use the Zoom mode or Custom zoom function
in the Screen menu to fine tune display geometry
and time frequency parameter.
Can hear sound, but no picture
Improperly connected source signal cable.
Make sure that both video inputs and sound
inputs are correctly connected.
Can see picture but no sound is heard
1. Improperly connected source signal cable.
2. Volume is turned all the way down.
3. [MUTE] is turned on.
1. Make sure that both video inputs and sound
inputs are correctly connected.
2. Press [ ] or [ ] button to hear sound.
3. Switch MUTE off by using the
button.
[
]
4. No external speaker connected.
4. Connect external speakers and adjust the
volume to a suitable level.
Some picture elements do not light up
Some pixels of the display may not turn on.
This display is manufactured using an extremely
high level of precision technology: however,
sometimes some pixels of the display may not
display.This is not a malfunction.
After-Images can still be seen on the display
after the display is powered off. (Examples
of still pictures include logos, video games,
computer images, and images displayed in 4:3
normal mode)
A still picture is displayed for an over extended
period of time
Do not allow a still image to be displayed for
an extended period of time as this can cause a
permanent after-image to remain on the display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BDL4620QL
9.
Technical Specifications
Display:
Item
Specifications
Screen Size (Active Area)
Aspect Ratio
46” LCD (116.8 cm)
16:9
Number of Pixels
Pixel Pitch
1920 (H) × 1080 (V)
0.53025 (H) × 0.53025 (V) [mm]
16.7 Million colors
350 cd/m²
Displayable Colors
Brightness
Contrast Ratio (Typical)
Viewing Angle
3000:1
178 degrees
In/OutTerminals:
Item
Specifications
Speaker Output
Internal Speakers
7W (L) + 7W (R) [RMS]/16Ω, 1 Way 1 Speaker System
82 dB/W/M/160 Hz ~ 13 KHz
Audio Output
Audio Input
RCA Jack × 2
0.5V [rms] (Normal) / 2 Channel (L+R)
0.5V [rms] (Normal) / 2 Channel (L+R)
3.5 mm Stereo × 1
RCA Jack × 2
RS232C Input/Output
LAN
2.5 mm × 2
TXD + RXD (1:1)
RJ-45 Jack × 1 (8 pin)
10/100 LAN Port
HDMI Input
HDMI Jack × 1
Digital RGB:TMDS (Video + Audio)
(Type A) (19 pin)
MAX: Video: 720p, 1080p, 1920 × 1080/60 Hz (WUXGA)
Audio: 48 KHz / 2 Channel (L+R)
Supports LPCM only
DVI-D Input
VGA Input
DVI-D jack
Digital RGB:TMDS (Video)
D-Sub Jack × 1 (15 pin) Analog RGB: 0.7V [p-p] (75Ω), H/CS/V:TTL (2.2kΩ), SOG: 1V [p-p] (75Ω)
MAX: 720p, 1080p, 1920 × 1080/60 Hz (WUXGA)
Component Input
RCA Jack × 3
Y: 1V [p-p] (75Ω), Pb: 0.7V [p-p] (75Ω), Pr: 0.7V [p-p] (75Ω)
MAX: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Serial digital audio output when input is HDMI
IR pass through or IR daisy chain
SPDIF Output
IR Input/Output
USB Input
SPDIF Port
3.5 mm × 2
USB × 1 (Type B)
USB 2.0, External PC connection
General:
Item
Specifications
Power Input
100-240V
95 W
50-60Hz, 2.5A
Power Consumption (Max.)
Power Consumption (Typical)
Power Consumption (EPA6.0)
Power Consumption (Standby & Off)
Dimensions [W × H × D]
Weight
80 W
60 W
< 0.5W (OSD:APM mode off)
1068 × 622.5 × 38.8 mm
13.7 Kg
Gross Weight
17.2 Kg
Environmental Condition:
Item
Specifications
Operational
5 ~ 40°C
Temperature
Storage
-20 ~ 60°C
Operational
20 ~ 80% RH (No condensation)
10 ~ 90% RH (No condensation)
0 ~ 2,000 m
Humidity
Storage
Operational
Altitude
Storage
0 ~ 5,000 m
21
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 Koninklijke Philips N.V. All rights reserved.
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|