Always there to help you
Register your product and get support at
SHB4000
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
5 Technical data
9
1 Important
2
2
Hearing Safety
Electric-, Magnetic- and
Electromagnetic Fields (EMF)
General information
Disposal of your old product
Remove the integrated battery
Notice for the European Union
Trademarks
6 Frequently asked questions
10
2
2
3
3
3
3
Bluetooth headset does not switch on. 10
Fail to pair with a mobile phone.
Pairing does not work.
The mobile phone cannot find the
headset.
Voice dialing or redialing does not work. 10
The headset is connected to a
10
10
10
Bluetooth stereo enabled mobile
phone, but music will play on the
mobile phone's speaker only.
Audio quality is poor and crackling
noises can be heard.
Audio quality is poor when streaming
from the mobile phone is very slow,
or audio streaming does not work at all.10
I hear but cannot control music on my
2 Your bluetooth stereo headset
Introduction
4
4
4
4
4
10
10
What's in the box
What else you'll need
Compatibility
Overview of your Bluetooth stereo
headset
5
3 Get started
6
6
device (e.g. skip forward/backward).
11
Charge the headset
Pair the headset with your mobile phone 6
4 Use the headset
Connect the headset to a mobile phone
Automatic power saving
Use your headset
7
7
7
7
8
Wear your headset
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
1 Important
Hearing Safety
Danger
2. One of Philips’ leading Business Principles is
to take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing products.
3. Philips is committed to develop, produce and
market products that cause no adverse health
effects.
4. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
• To avoid hearing damage, limit the time you use the
headphones at high volume and set the volume to a
safe level.The louder the volume, the shorter is the safe
listening time.
5. Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate further
developments in standardization for early
integration in its products.
Be sure to observe the following guidelines
when using your headphones.
•
Listen at reasonable volumes for
reasonable periods of time.
•
Be careful not to adjust the volume
continuously upwards as your hearing
adapts.
General information
To avoid damage or malfunction:
• Do not expose the headset to excessive heat.
• Do not drop your headset.
•
•
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
• Apparatus shall not be exposed to dripping
or splashing.
• Do not allow your headset to be submerged
in water.
•
•
Excessive sound pressure from earphones
and headphones can cause hearing loss.
• Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives.
Using this headset with both ears covered
while driving is not recommended and may
be illegal in some areas while driving.
• If cleaning is required use a soft cloth, if
necessary dampened with a minimum
amount of water or diluted mild soap, to
clean the product.
•
For your safety, avoid distractions from
music or phone calls while in traffic or
other potentially dangerous environments.
About operating and storage temperatures
• Do not operate or store in a place where
temperature is below -15ºC (5ºF) or above
55ºC (131ºF) as this may shorten your
battery life.
Electric-, Magnetic- and
Electromagnetic Fields (EMF)
•The integrated battery shall not be exposed
to excessive heat such as sunshine, fire or the
like.
1. Royal Philips Electronics manufactures and
sells many products targeted at consumers,
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
If there is no collection/recycling system for
electronic products in your country, you can
protect the environment by removing and
recycling the battery before disposing the
headset.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
a
b
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
c
d
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Battery disposal
Notice for the European
Union
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Hereby, Philips Consumer Lifestyle, BG
Communications, Headphones & Accessories,
declares that this Philips Bluetooth stereo
headset SHB4000/SHB4000WT is in compliance
with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Trademarks
Remove the integrated
battery
Trademarks are the property of Koninklijke
Philips Electronics N.V. or their respective
owners.The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and
any use of such marks by Koninklijke Philips
Electronics N.V. is under license.
Warning
• Make sure the headset is disconnected from the USB
charging cable before removing the battery.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your bluetooth
stereo headset
Quick start guide
EN
Philips Bluetooth stereo headset SHB4000/SHB4000WT
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
•
Quick start guide
Introduction
With this Philips Bluetooth stereo headset, you
can:
What else you'll need
A mobile phone that is capable of Bluetooth
stereo streaming is compatible with the
Bluetooth A2DP profile.
•
•
•
Enjoy convenient wireless hands-free call
Enjoy and control wireless music
Switch between calls and music
Other devices (Notebooks, PDA's, Bluetooth
adapters, MP3 players etc.) are also compatible
if they share the Bluetooth profiles supported
by the headsets.These profiles are:
What's in the box
For wireless Hands-Free communication:
•
The Bluetooth Headset profiles (HSP) or
the Bluetooth Hands-Free profile (HFP).
For wireless stereo listening:
•
The Bluetooth Advanced Audio
Distribution profile (A2DP).
For wireless music control:
•
The Bluetooth AudioVideo Remote
•
Philips Bluetooth stereo headset
Control profile (AVRCP).
SHB4000/SHB4000WT
Compatibility
Your headset is compatible with Bluetooth
enabled mobile phones. It features Bluetooth
version 3.0. It also works with devices featuring
other Bluetooth versions that support the
Headset profile (HSP), Hands-Free profile
(HFP),Advanced Audio Distribution profile
(A2DP) and Audio/Video Remote Control
profile (AVRCP).
•
USB charging cable
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of your Bluetooth
stereo headset
a Volume/Track control
b
•
•
Turn the headset on or off
Play/Pause/Pick up call/Hang up/Redial/
Reject call
c Mic
d Charging slot
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press and hold
until the LED starts
3 Get started
flashing white and blue alternately.
» The headset is in pairing mode, which
lasts five minutes.
Pair the headset with the mobile phone.
For details, refer to the user manual of
your mobile phone.
Charge the headset
A sample pairing is shown below.
Warning
1
2
3
Activate the Bluetooth feature of your
mobile phone, search for the model
number of the headset.
• Before you use your headset for the first time, charge
the battery for four hours for optimum battery capacity
and lifetime.
• Use only the original USB charging cable to avoid any
damage.
On mobile phones featuring Bluetooth
2.1+EDR or higher, you do not need to
enter a pass code.
• End a call before charging the headset, as connecting
the headset for charging will power off the unit.
Plug the headset into a powered USB port with
an USB charging cable.
From the found devices, select Philips
SHB4000.
» LED turns white during charging and
turns off when the headset is fully
charged.
•
Enter "0000" (4 zeros) if prompted to
enter the pin code of the headset.
Tip
10:35
10:36
10:37
Settings
Connectivity
Settings
Settings
Connectivity
• Normally, a full charge takes three hours.
Bluetooth
Devices Found
Enter Password
****
Add
Bluetooth
device
Philips SHB4000
0000
Select
Pair the headset with your
mobile phone
Select
Select
Back
Back
Back
Before you use the headset with your mobile
phone for the first time, pair it with the mobile
phone.A successful pairing establishes a unique
encrypted link between the headset and the
mobile phone.The headset stores the last eight
links in the memory. If you try to pair more than
eight devices, the link for the earliest paired
devices is replaced by the new link.
1
2
Make sure that the mobile phone is turned
on and its Bluetooth feature is activated.
Make sure that the headset is charged and
turned off.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the
headset off.
Press and
hold
more than 4
seconds
• 1 long beep
4 Use the headset
for
• 1 long white
flash
Play or pause
music.
Pick up or
terminate a
call.
1 short beep
1 short beep
Press
Connect the headset to a
mobile phone
Press
Reject a call.
Press and
hold
1 short beep
1 short beep
1
2
Turn on your mobile phone.
Press and hold
to turn the headset on.
Redial the
last number.
Press
twice
» The blue LED flashes.
» The headset is reconnected to the last
connected device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Switch caller
in a call.
1 long beep
Press
twice
Press +/-
Adjust
volume.
Skip forward. Press and
hold +
Skip
1 short beep
1 short beep
1 short beep
Tip
Press and
hold -
backward.
• If you turn on the mobile phone or its Bluetooth
feature after turning on the headset, connect the
headset from the Bluetooth menu on your mobile
phone.
Other status and indicators
Headset status
Indicator
The headset is connected
Blue LED
to a Bluetooth device, while flashes every 6
the headset is in standby
mode or while you are
listening to music.
The headset is ready for
pairing.
seconds.
Automatic power saving
If the headset fails to connect any Bluetooth
device within range in five minutes, it powers
down automatically to save the battery life.
LED flashes
whiteand
bluealternately.
The headset is on but not
connected to a Bluetooth
device.
Blue LED
flashes fast.
Use your headset
Task
Operation
Sound or LED
Indicator
1 short beep
There is an incoming call.
Blue LED
flashes twice
per second.
White LED
flashes.
Turn the
Press and
headset on.
hold
for
• 1 blue flash:
Battery level
> 50%
Low battery.
more than 1
second
Battery is fully charged.
White LED is
off.
• 1 white flash:
Battery level
< 50%
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wear your headset
Adjust the headband for the best fit.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Technical data
•
•
•
•
Up to 9 hours of play time or talk time
Up to 200 hours of standby time
Normal time for a full charge: 3 hours
Rechargeable Lithium-Polymer battery
(200 mAh)
•
Bluetooth 3.0, Bluetooth mono support
(Headset Profile - HSP, Hands-Free
Profile - HFP), Bluetooth stereo supported
(Advanced Audio Distribution Profile
- A2DP;AudioVideo Remote Control
Profile - AVRCP)
•
Operating range: Up to 15 meters (50
feet)
•
•
•
•
•
Adjustable, flat-folding headband
Noise isolating slow recovery foam
Digital echo & noise reduction
Auto power off
Battery status check
Specifications are subject to change without
notice.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Frequently
Voice dialing or redialing does
not work.
Your mobile phone may not support this
feature.
asked questions
Bluetooth headset does not
switch on.
The headset is connected to
a Bluetooth stereo enabled
mobile phone, but music will
play on the mobile phone's
speaker only.
Battery is low.
•
Charge the headset.
The mobile phone may have the option to
listen to music via speaker or headset.
Fail to pair with a mobile phone.
•
Refer to the user manual of your
mobile phone on how to transfer the
music to the headset.
Bluetooth disabled.
•
Enable the Bluetooth feature on your
mobile phone and turn on the mobile
phone before you turn on the headset.
Audio quality is poor and
crackling noises can be heard.
Pairing does not work.
The Bluetooth audio source is out of range.
The headset is not in pairing mode.
•
Reduce the distance between the headset
and the Bluetooth audio source, or
remove obstacles between them.
•
•
Follow the steps described in this user
manual.
Make sure that the LED light flashes
whiteand blue alternately before you
release . Do not stop holding the button
after seeing the blue LED only.
Audio quality is poor when
streaming from the mobile
phone is very slow, or audio
streaming does not work at
all.
The mobile phone cannot
find the headset.
The headset may be connected to another
previously paired device.
The mobile phone may only support (mono)
HSP/HFP but not support A2DP.
•
Turn the connected device off or move it
out of range.
•
Refer to the user manual of the mobile
phone for detailed information on
compatibility.
Pairings may have been reset or headset has
been previously paired with other device.
•
Pair the headset with the mobile phone
again as described in the user manual.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
I hear but cannot control
music on my device (e.g. skip
forward/backward).
The Bluetooth audio source does not support
AVRCP.
•
Refer to the user manual of the audio
source for detailed information on
compatibility.
further support.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
0168
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
SHB4000_UM_00_EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|