Philips Flat Panel Television PFL5XX7H 12 User Manual

Register your product and get support at  
PFL5xx7H/12  
PFL5xx7K/12  
PFL5xx7T/12  
PFL5xx7H/60  
PFL5xx7T/60  
EN User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart TV  
You can make your TV the centre of your  
digital life with the Smart TV suite of  
applications:  
1 Get started  
TV tour  
If you connect your TV to the home  
network, you can share movies, pictures  
and music from a computer or media  
server on your home network.  
If you connect your TV to the Internet,  
you can enjoy a wealth of streaming  
movies, pictures, music and much more  
with Youtube and other Smart TV  
applications.  
High Definition TV  
Your TV is equipped with a High-Definition  
(HD) display so you can watch HD video in  
these ways and more:  
a Blu-ray disc player, connected with an  
HDMI cable, playing a Blu-ray disc  
an upscaling DVD player, connected  
with an HDMI cable, playing a DVD  
disc  
\
While you're watching a digital channel,  
you can pause TV at any time and catch  
up with the broadcast later. The  
broadcast is stored on a USB hard disk  
or streamed through catch-up TV  
applications in Smart TV.  
an over-the-air HD broadcaster (DVB-  
T or DVB-T2 MPEG4)  
a digital HD receiver, connected with  
an HDMI cable, playing HD content  
from a cable or satellite operator  
an HD game console, connected with  
an HDMI cable, playing HD games  
If you connect your TV to the Internet,  
you can record your favourite TV show  
on a USB hard disk.  
You can use Philips smartphone control  
from your iPhone or Android phone to  
control your TV.  
Watch an HD demo clip  
To experience the stunning sharpness and  
picture quality of your HD TV, watch the  
HD video clip available from the Home  
menu.  
\
Media playback  
If you connect your TV to a USB storage  
device, you can enjoy your movies, music  
and pictures on a wide screen TV with  
excellent sound.  
Press > [Setup] > [Watch demos].  
For information about the availability of HD  
channels in your country, contact your Philips  
You can also connect your PC to the TV  
with an HDMI or VGA cable.  
3D TV  
Available for certain models only.  
This is a 3D TV. You can watch 3D films and  
programmes in full HD resolution on this  
TV. When you start a 3D film on a  
connected 3D Blu-ray disc player or tune  
into a TV channel that broadcasts 3D  
programmes, the TV switches to 3D.  
You can also convert 2D images to 3D.  
Read more in Use your TV > Watch 3D  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1. : Switch the TV on or to standby.  
2. CH +/-: Switch to the next or previous  
Programme guides  
You can find out what's on and what's  
coming up with the now and next EPG  
(Electronic Programme guide) or eight day  
EPG.  
channel.  
3. : Select a connected device.  
4.  
+/-: Increase or decrease volume.  
Programme guides are provided by  
Sensors  
broadcasters or over the Internet. If you  
connect your TV to the Internet, you can  
access more extensive programme details.  
EasyLink  
If you connect your TV to HDMI-CEC  
(Consumer Electronic Control) enabled  
devices, such as a Blu-ray player or home  
theatre, you can control them at the same  
time with one remote control. Simply switch  
on EasyLink after connection.  
Intuitive menus  
With the TV's intuitive menus, you can easily  
access the channel or media file that you  
want or tweak the TV settings to suit your  
needs.  
1. Remote control sensor  
Point the remote control at the sensor.  
Make sure that the line of sight between the  
remote control and the TV is not blocked by  
furniture or other objects.  
TV controls  
Rear controls  
Remote control  
1. (Standby): Switch the TV on or to  
standby.  
2. Play buttons: Control playback of media  
files.  
3.  
4.  
5.  
SOURCE: Access a connected device.  
FORMAT: Change picture format.  
TV: Switch source to watch TV.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18. Colour buttons: Select tasks or options.  
The buttons function according to the  
services offered by the broadcaster.  
19. SUBTITLE: Switch subtitles on or off.  
20. 0-9(Numeric buttons): Select TV  
channels or enter text.  
21. TEXT: Switch text on or off.  
6. (Home): Access the Home menu.  
7. OK: Confirm an entry or selection.  
8. SMART TV: Access Smart TV features.  
9.  
(Navigation buttons): Navigate  
through menus and select items.  
EasyLink controls  
Note: EasyLink controls are available when  
the connected device is HDMI-CEC  
compliant.  
With EasyLink controls, you can control your  
TV and other HDMI-CEC devices with one  
remote control.  
Access EasyLink controls  
10. LIST: Access the TV channel list.  
11. ADJUST: Access TV settings.  
1. While you view content from a connected  
HDMI-CEC device, press OPTIONS.  
2. Select [Show device keys], then press  
OK.  
3. Select the EasyLink control button, then  
press OK.  
12.  
INFO: Display information about  
current activity.  
13. OPTIONS: Access currently available  
options.  
Read more on EasyLink in Use more of  
your TV > Use EasyLink (Page 32).  
Smartphone control  
You can use your smartphone as a  
secondary remote, and even as a keyboard.  
You can also view a slideshow of the images  
in your smartphone on the TV. To  
download the application 'Philips My  
Remote', visit the Apple App store or the  
Android Market. Follow the instructions  
provided at the application store.  
14. (Back): Return to the previous menu  
page or exit from a TV function.  
15. CH - / CH +: Change channels.  
16. +/-(Volume): Adjust volume.  
17. (Mute): Mute or restore audio.  
Ensure that your TV and smartphone are  
connected to the same local network. Read  
more on network connections at Connect  
your TV > Network and the Internet (Page  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
To disconnect the TV from the mains  
power, the power plug of the TV must  
be disconnected. When disconnecting  
the power, always pull the power plug,  
never the cord. Ensure that you have  
full access to the power plug, power  
cord and outlet socket at all times.  
Important information  
Safety  
Read and understand all instructions before  
you use your TV. If damage is caused by  
failure to follow the instructions, the  
warranty does not apply.  
Risk of damage to the TV!  
Two people are required to lift and  
carry a TV that weighs more than 25kg  
or 55lbs.  
When stand mounting the TV, use only  
the supplied stand. Secure the stand to  
the TV tightly. Place the TV on a flat,  
level surface that can support the  
combined weight of the TV and the  
stand.  
When wall mounting the TV, use only a  
wall mount that can support the weight  
of the TV. Secure the wall mount to a  
wall that can support the combined  
weight of the TV and wall mount. TP  
Vision Netherlands B.V. bears no  
responsibility for improper wall  
mounting that result in accident, injury  
or damage.  
Risk of electric shock or fire!  
Never expose the TV to rain or water.  
Never place liquid containers, such as  
vases, near the TV. If liquids are spilt on  
or into the TV, disconnect the TV from  
the power outlet immediately. Contact  
Philips Consumer Care to have the TV  
checked before use.  
Never place the TV, remote control or  
batteries near naked flames or other  
heat sources, including direct sunlight.  
To prevent the spread of fire, keep  
candles or other flames away from the  
TV, remote control and batteries at all  
times.  
If you need to store the TV,  
disassemble the stand from the TV.  
Never lay the TV on its back with the  
stand installed.  
Before you connect the TV to the  
power outlet, ensure that the power  
voltage matches the value printed on  
the back of the TV. Never connect the  
TV to the power outlet if the voltage is  
different.  
Never insert objects into the ventilation  
slots or other openings on the TV.  
Never expose the remote control or  
batteries to rain, water or excessive  
heat.  
Avoid force coming onto power plugs.  
Ensure that the power plug is fully  
inserted into the power socket. Loose  
power plugs can cause arcing or fire.  
When the TV is swivelled, ensure that  
no strain is exerted on the power cord.  
Strain on the power cord can loosen  
connections and cause arcing.  
Parts of this product may be made of  
glass. Handle with care to avoid injury  
and damage.  
Risk of injury to children!  
Follow these precautions to prevent the TV  
from toppling over and causing injury to  
children:  
Never place the TV on a surface  
covered by a cloth or other material  
that can be pulled away.  
Ensure that no part of the TV hangs  
over the edge of the surface.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Never place the TV on tall furniture,  
such as a bookcase, without anchoring  
both the furniture and TV to the wall  
or a suitable support.  
Educate children about the dangers of  
climbing on furniture to reach the TV.  
To avoid discomfort such as dizziness,  
headache or disorientation, we  
recommend not watching 3D for  
extended periods of time. If you  
experience any discomfort, stop  
watching 3D and do not immediately  
engage in any potentially hazardous  
activity (for example driving a car) until  
your symptoms have disappeared. If  
symptoms persist, do not resume  
watching 3D without consulting a  
medical professional first.  
Parents should monitor their children  
during 3D viewing and ensure they do  
not experience any discomfort as  
mentioned above. Watching 3D is not  
recommended for children under six  
years of age as their visual system is not  
fully developed yet.  
Risk of swallowing batteries!  
The product/remote control may  
contain a coin-type battery, which can  
be swallowed. Keep the battery out of  
reach of children at all times!  
Risk of overheating!  
Never install the TV in a confined  
space. Always leave a space of at least 4  
inches or 10 cm around the TV for  
ventilation. Ensure that curtains or  
other objects never cover the  
ventilation slots on the TV.  
Risk of injury, fire or power cord damage!  
Screen care  
Never place the TV or any objects on  
the power cord.  
Disconnect the TV from the socket and  
aerial before lightning storms. During  
lightning storms, never touch any part  
of the TV, power cord or aerial cable.  
Risk of damage to the TV screen!  
Never touch, push, rub or strike the  
screen with any object.  
Unplug the TV before cleaning.  
Clean the TV and frame with a soft  
damp cloth. Never use substances such  
as alcohol, chemicals or household  
cleaners on the TV.  
Risk of hearing damage!  
Avoid using earphones or headphones  
at high volumes or for prolonged  
periods of time.  
To avoid deformations and colour  
fading, wipe off water drops as soon as  
possible.  
Low temperatures  
If the TV is transported in temperatures  
Avoid stationary images as much as  
possible. Stationary images are images  
that remain onscreen for extended  
periods of time. Stationary images  
include onscreen menus, black bars,  
time displays, etc. If you must use  
stationary images, reduce screen  
contrast and brightness to avoid screen  
damage.  
below 5°C or 41°F, unpack the TV and  
wait until the TV temperature matches  
room temperature before connecting  
the TV to the power outlet.  
3D, health warning  
Available for certain models only.  
If you or your family have a history of  
epilepsy or photosensitive seizures,  
consult a medical professional before  
exposing yourself to flashing light  
sources, rapid image sequences or 3D  
viewing.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Terms of warranty  
Lock the TV  
Risk of injury, damage to TV or void of  
warranty! Never attempt to repair the  
TV yourself.  
Your TV is equipped with a Kensington  
security slot at the base of the TV. To secure  
the TV, purchase a Kensington anti-theft lock  
(sold separately).  
Use the TV and accessories only as  
intended by the manufacturer.  
The caution sign printed on the back of  
the TV indicates risk of electric shock.  
Never remove the TV cover. Always  
contact Philips Customer Care for  
service or repairs.  
Any operation expressly prohibited in  
this manual, or any adjustments and  
assembly procedures not  
recommended or authorised in this  
manual shall void the warranty.  
Notice  
Pixel characteristics  
2012 © TP Vision Netherlands B.V. All rights  
reserved. Specifications are subject to change  
without notice. Trademarks are the property  
of Koninklijke Philips Electronics N.V or their  
respective owners. TP Vision Netherlands  
B.V. reserves the right to change products at  
any time without being obliged to adjust  
earlier supplies accordingly.  
This LCD/LED product has a high number of  
colour pixels. Although it has effective pixels  
of 99.999% or more, black dots or bright  
points of light (red, green or blue) may  
appear constantly on the screen. This is a  
structural property of the display (within  
common industry standards) and is not a  
malfunction.  
The material in this manual is believed  
adequate for the intended use of the system.  
If the product, or its individual modules or  
procedures, are used for purposes other  
than those specified herein, confirmation of  
their validity and suitability must be obtained.  
TP Vision Netherlands B.V. warrants that the  
material itself does not infringe any United  
States patents. No further warranty is  
expressed or implied.  
CE compliance  
This product is in compliance with the  
essential requirements and other relevant  
provisions of Directives 2006/95/EC (Low  
Voltage) and 2004/108/EC (EMC).  
\\  
TP Vision Netherlands B.V. cannot be held  
responsible neither for any errors in the  
content of this document nor for any  
problems as a result of the content in this  
document. Errors reported to Philips will be  
adapted and published on the Philips support  
website as soon as possible.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance with EMF  
TP Vision Netherlands B.V. manufactures  
and sells many products targeted at  
consumers which, like any electronic  
apparatus, in general have the ability to emit  
and receive electromagnetic signals.  
Kensington and Micro Saver are registered  
US trademarks of ACCO World  
corporation with issued registrations and  
pending applications in other countries  
throughout the world.  
One of Philips’ leading Business Principles is  
to take all necessary health and safety  
measures for our products, to comply with  
all applicable legal requirements and to stay  
well within the Electro Magnetic Field (EMF)  
standards applicable at the time of producing  
the products.  
Covered by one or more of the following  
U.S. patents: 7,295,673; 7,460,668;  
7,515,710; 7,519,274.  
DivX®, DivX Certified® and associated logos  
are trademarks of Rovi Corporation or its  
subsidiaries and are used under licence.  
ABOUT DIVX VIDEO: DivX® is a digital  
video format created by DivX, LLC, a  
subsidiary of Rovi Corporation. This is an  
official DivX Certified® device that plays  
DivX video. Visit divx.com for more  
information and software tools to convert  
your files into DivX videos.  
Philips is committed to develop, produce  
and market products that cause no adverse  
health effects. TP Vision confirms that, as  
long as its products are handled properly for  
their intended use, they are safe to use  
according to scientific evidence available  
today.  
Philips plays an active role in the  
development of international EMF and safety  
standards, enabling Philips to anticipate  
further developments in standardisation for  
early integration in its products.  
ABOUT DIVX VIDEO-ON-DEMAND: This  
DivX Certified® device must be registered in  
order to play purchased DivX Video-on-  
Demand (VOD) movies. To obtain your  
registration code, locate the DivX VOD  
section in your device setup menu. Go to  
vod.divx.com for more information on how  
to complete your registration.  
Trademarks and copyrights  
Windows Media is either a registered  
trademark or trademark of Microsoft  
Corporation in the United States and/or  
other countries.  
Manufactured under licence from Dolby  
Laboratories. Dolby and the double D  
symbol are trademarks of Dolby  
Laboratories.  
The terms HDMI and HDMI High-Definition  
Multimedia Interface and the HDMI Logo are  
trademarks or registered trademarks of  
HDMI Licensing LLC in the United States  
and other countries.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PlayReady Final Products  
Sustainability  
Content owners use Microsoft PlayReady™  
content access technology to protect their  
intellectual property, including copyrighted  
content. This device uses PlayReady  
technology to access PlayReady protected  
content and/or WMDRM-protected content.  
If the device fails to properly enforce  
restrictions on content usage, content  
owners may require Microsoft to revoke the  
device’s ability to consume PlayReady-  
protected content. Revocation should not  
affect unprotected content or content  
protected by other content access  
Energy efficiency  
This TV is designed with energy-efficient  
features. To access these features, press the  
Green button on the remote control.  
Energy saving picture settings: You can  
apply a combination of energy saving  
picture settings. While you watch TV,  
press the Green button and select  
[Energy saving].  
Screen off: If you only want to listen to  
audio from the TV, you can switch off  
the TV display. Other functions  
continue to operate normally.  
Light sensor: When the surrounding  
light darkens, the built-in ambient light  
sensor lowers the brightness of the TV  
screen.  
Low standby power: The advanced  
power circuitry reduces the power  
consumption of the TV to an extremely  
low level, without losing out on the  
constant standby functionality.  
technologies. Content owners may require  
you to upgrade PlayReady to access their  
content. If you decline an upgrade, you will  
not be able to access content that requires  
the upgrade.  
All other registered and unregistered  
trademarks are the property of their  
respective owners.  
Power management: An advanced  
power management system helps save  
the energy consumed by this TV.  
To view how your personalised TV  
settings affect the TV's relative power  
consumption, press , then select  
[Setup] > [Watch demos] > [Active  
Control].  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal  
household waste. Please inform yourself  
about the local rules on separate collection  
of batteries because correct disposal helps to  
prevent negative consequences for the  
environment and human health.  
End of use  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European  
Directive 2002/96/EC. Please inform yourself  
about the local separate collection system  
for electrical and electronic products.  
Ecolabel  
Philips continuously focuses on lowering the  
environmental impact of our innovative  
products. We aim our efforts towards  
environmental improvements during  
manufacturing, reduction of harmful  
substances, efficient use of energy, end-of-life  
instructions and product packaging.  
This TV has been awarded the European  
Union Ecolabel for its environmentally  
friendly qualities.  
A TV that is awarded the Ecolabel contains  
energy-efficient features. To access energy-  
saving settings while you watch TV, press the  
Green button on the remote control.  
Please act according to your local rules and  
do not dispose of your old products with  
your normal household waste. Correct  
disposal of your old product helps to  
prevent potential negative consequences for  
the environment and human health.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can find detailed information on standby  
energy consumption, warranty policy, spare  
parts and recycling of this TV on the Philips  
website for your country at  
Search the TV forum  
Your question may have already been  
answered by the Philips TV community of  
Contact Philips  
EU energy label  
You can contact Philips Consumer Care in  
your country for support. The number is  
available in the leaflet accompanying this  
product or online at  
The European Energy Label informs you on  
the energy efficiency class of the product.  
The greener the energy efficiency class of  
this product is, the lower the energy it  
consumes.  
Before you contact Philips, write down the  
model and serial number of your TV. You  
can find this information on the back of your  
TV or on the TV packaging.  
On the label, you can find the energy  
efficiency class, the average power  
consumption of the product in use and the  
average energy consumption for 1 year. You  
can also find the power consumption values  
for the product on the Philips website for  
your country at www.philips.com/TV.  
Help and support  
Use Help  
To access the onscreen Help menu, press  
the Yellow button.  
To switch between the Help menu and the  
TV menu, press the Yellow button.  
Visit the Philips website  
If you can't find what you need in the  
onscreen [Help], visit the Philips support  
On the Philips support website, you can also:  
Find answers to Frequently Asked  
Questions (FAQ)  
Download a printable PDF version of  
this user manual  
Email us a specific question  
Chat online with our support personnel  
(available in certain countries only)  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Automatic switch off  
2 Use your TV  
You can save energy with this TV's energy  
efficiency settings. The settings are enabled  
by default, so that if there is no user  
interaction (such as pressing a remote  
control button or a control on the rear  
panel) for four hours, the TV will  
automatically switch to standby.  
Watch TV  
Switch TV on or off  
To disable automatic switch off  
1. While you watch TV, press the Green  
button on the remote control.  
2. Select [Auto switch off], then press OK.  
A confirmation message is displayed.  
Adjust TV volume  
Increase or decrease the TV volume  
Press +/- on the remote control.  
Press +/- on the side of the TV.  
Switch the TV on  
Connect the TV to the mains outlet  
and press the mains power switch.  
If the TV is on standby, press on the  
remote control or on the rear panel of  
the TV.  
Note: There is a short delay before the TV  
responds.  
Tip: If you cannot find your remote control  
and want to switch the TV on from standby,  
press any key on the rear panel of the TV.  
Switch TV to standby  
Press on the remote control or on the  
rear panel of the TV.  
Mute or unmute the TV volume  
Press  
Press  
to mute the TV.  
again to restore the volume.  
The remote control sensor on the TV  
switches to red.  
Switch off the TV  
Adjust headphone volume  
1. Press > [Setup] > [TV settings] >  
[Sound].  
Turn off the mains power switch.  
The TV switches off.  
2. Select [Headphones volume], then press  
OK.  
3. Press the Navigation buttons to adjust the  
volume.  
Note: Though your TV consumes very little  
energy when it is in standby or switched off,  
it does use some energy. If you are not going  
to use the TV for an extended period of  
time, disconnect the TV from the mains plug.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Switch TV channels  
Manage channel lists  
After the channels have been installed, you  
can manage them:  
Press CH +/- on the remote control or  
TV.  
Press the Numeric buttons to enter a  
Rename channels  
Reorder channels  
Listen to digital radio  
channel number.  
Rename channels  
You can rename the channels. The name  
appears when the channels are selected.  
1. While you watch TV, press LIST.  
The channel list is displayed.  
2. Select the channel to rename, then press  
OPTIONS.  
3. Select [Rename], then press OK.  
4. Press the Navigation buttons to select  
each character, then press OK.  
Tips:  
You can press OK in the entry screen  
to enable the Onscreen Keyboard.  
Press [ABC] or [abc] to switch  
between uppercase and lowercase  
letters.  
Manage favourites  
You can view all channels or only a list of  
your favourite channels so that you can find  
them easily.  
5. Once complete, select [Done], then press  
OK to confirm.  
6. Press to exit.  
Reorder channels  
After the channels have been installed, you  
can reorder the channel list.  
Press LIST to access the channel list.  
Create a list of your favourite channels  
1. Press LIST.  
2. Select the channel to mark as a favourite,  
then press OPTIONS.  
3. Select [Mark as favourite], then press OK.  
1. While you watch TV, press LIST.  
The channel list is displayed.  
2. Select the channel to reorder, then press  
OPTIONS.  
3. Select [Reorder], then press OK.  
4. Press the Navigation buttons to move the  
highlighted channel to another location, then  
press OK.  
The selected channel is marked with a star.  
To remove a channel from the favourites list,  
select [Unmark as favourite], then press  
OK.  
5. Select one of the following options, then  
Select a channel list  
press OK.  
1. Press LIST, then press OPTIONS.  
2. Select [Select list] > [Favourites] to  
display channels in the favourite list or [All]  
to display all channels.  
[Insert]: Insert the channel into the  
desired location.  
[Swap]: Swap location with another  
channel.  
3. Press OK to confirm.  
6. Once complete, press OPTIONS, then  
select [Exit].  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listen to digital radio  
Use smart settings  
Your TV comes with smart picture and  
sound settings. You can apply these settings  
or customise them.  
Select your preferred picture setting  
1. While you watch TV, press ADJUST.  
2. Select [Smart picture].  
3. Select one of the following settings, then  
press OK:  
If digital radio channels are available, you can  
listen to them. They are installed  
automatically when you install TV channels.  
1. While you watch TV, press LIST. The  
channel list is displayed.  
2. Press OPTIONS.  
3. Select [Select list] > [Radio] , then press  
OK.  
4. Select a radio channel, then press OK.  
[Personal]: Apply your personalised  
picture settings.  
Select a source  
You can watch a connected device in one of  
the following ways:  
[Vivid]: Rich and dynamic settings, ideal  
for daytime viewing.  
[Natural]: Natural picture settings.  
[Cinema]: Ideal settings for movies.  
[Game]: Ideal settings for games.  
[Energy saving]: Settings that conserve  
the most energy.  
Add its icon to the Home menu.  
Select from the Source menu.  
Note: If you connect an HDMI-CEC  
compliant device to the TV, it is  
automatically added to the Home menu.  
[Standard]: Default settings that suit  
most environments and types of video.  
[Photo]: Ideal settings for photos.  
[Custom]: Customise and store your  
own picture settings.  
Add new device  
1. Connect and switch on the device.  
2. Press  
.
3. Select [Add your devices], then press  
OK.  
Select your preferred sound setting  
1. While you watch TV, press ADJUST.  
2. Select [Smart sound].  
3. Select one of the following settings, then  
press OK:  
4. Follow the onscreen instructions.  
If you are prompted to select the TV  
connection, select the connector that this  
device uses.  
View from Home menu  
[Personal]: Apply your personalised  
sound setting.  
[Standard]: Settings that suit most  
environments and types of audio.  
[News]: Ideal settings for spoken audio,  
such as the news.  
After you have added the new device to the  
Home menu, you can select its icon to start  
using it.  
1. Press  
.
2. Select the device icon from the Home  
menu.  
3. Press OK to confirm.  
[Movie]/[3D movie]*: Ideal settings for  
films.  
View from Source menu  
You can also press  
[Game]: Ideal settings for games.  
[Drama]: Ideal settings for drama  
programmes.  
SOURCE to display a  
list of connector names. Select the  
connector that connects the device to the  
TV.  
[Sports]: Ideal settings for sports.  
1. Press  
SOURCE.  
* For certain models only.  
2. Press the Navigation buttons to select a  
connector in the list.  
3. Press OK to confirm.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set programme guide  
Before you use the programme guide, check  
the following settings:  
Change picture format  
You can change the picture format to suit  
the video source.  
1. Press  
.
1. Press ADJUST.  
2. Select [Setup] > [TV settings] >  
[Preferences] > [Programme guide].  
3. Select [From the broadcaster], then press  
OK.  
2. Select [Picture format], then press OK.  
3. Select a picture format, then press OK to  
confirm.  
The available picture formats depend on the  
video source:  
Access the TV programme guide  
1. Press  
.
[Auto fill]: Adjust the picture to fill the  
screen (subtitles remain visible).  
Recommended for minimal screen  
distortion but not for HD or PC.  
[Auto zoom]: Enlarge the picture to fill  
the screen. Recommended for minimal  
screen distortion but not for HD or PC.  
[Super zoom]: Remove the black bars  
on the sides of 4:3 broadcasts. Not  
recommended for HD or PC.  
[Movie expand 16:9]: Scale 4:3 format  
to 16:9. Not recommended for HD or  
PC.  
2. Select [Programme guide], then press  
OK.  
Use TV programme guide options  
You can customise the displayed information  
to:  
Remind you when programmes start  
Display only preferred channels  
1. In the programme guide, press  
OPTIONS.  
2. Select an option, then press OK:  
[Set reminder]: Set programme  
reminders.  
[Clear reminder]: Clear programme  
[Wide screen]: Stretch 4:3 format to  
16:9.  
[Unscaled]: Provide maximum detail for  
PC. Only available when PC mode is  
selected in the picture menu.  
reminders.  
[Change day]: Select the day to display.  
[More info]: Display programme  
information.  
[Search by genre]: Search TV  
programmes by genre.  
[Scheduled reminders]: List  
programme reminders.  
View programme guide  
From broadcaster  
From the Internet  
You can view information about digital TV  
channels using programme guides provided  
by broadcasters. This information can  
include:  
If your TV is connected to the Internet, you  
can receive programme guides over the  
Internet. Internet programme guides include:  
Channel schedules  
Synopsis of programmes  
Channel schedules for the day ('Now  
and next') or up to 8 days, if supported  
by your broadcaster  
Note: Availability of Internet programme  
guides is dependent on your broadcaster.  
Synopsis of programmes  
Set programme guide  
Before you use the programme guide, check  
the following settings:  
Note: Programme guides are available in  
certain countries only.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Programme guide].  
3. Select [From network] then press OK.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Access the TV programme guide  
Watch 3D  
1. Press  
.
2. Select [Programme guide], then press  
OK.  
What you need  
Available for certain models only.  
Note: If you are viewing the programme  
guide for the first time, follow the onscreen  
instructions to update the guide.  
Your TV is a 3D TV. Before you watch 3D,  
read the health warning information in Get  
started > Important information > 3D  
Health warning (Page 7).  
Use TV programme guide options  
You can use the programme guide to:  
Schedule recordings of programmes  
Identify channels  
Enable subtitles when available  
Show onscreen remote control  
To watch 3D on this TV, you need the  
Philips 3D Max active glasses, PTA507 (sold  
separately).  
See the user manual of the glasses for  
information on how to switch on and charge  
the glasses.  
1. In the programme guide, press  
OPTIONS.  
2. Select an option, then press OK:  
Note:  
[Record]: Set a scheduled recording.  
[Identify channel]: Manually update  
channel information.  
[Select day]: Select the day to display.  
[Manual record]: Set a scheduled  
recording.  
[Show remote control]: Display  
onscreen remote control.  
[Reload page]: Refresh the page display.  
[Zoom page]: Change zoom level of  
page display.  
Active 3D glasses from other  
manufacturers may not work or may  
offer less than optimal 3D viewing.  
Do not use the 3D glasses for any  
purpose other than watching 3D TV.  
To experience the best 3D effect while you  
watch 3D programmes:  
Watch the TV away from direct  
sunlight.  
Sit at a height where the centre of the  
TV screen is at your eye level.  
Sit at a distance that is at least three  
times the height (h) of the TV screen  
away from the TV. Do not sit more  
than 6 m away.  
[Security info]: Display programme  
security information.  
[Subtitles]: Enable or disable subtitles  
when available.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To switch the overlapping images to 3D,  
change the 3D format.  
1. Press ADJUST.  
To ensure unobstructed reception on  
the 3D glasses, do not block the 3D  
transmitter on the TV.  
2. Select [3D].  
If the TV displays pictures that overlap  
vertically, select [3D - Side by side].  
If the TV displays pictures that overlap  
horizontally, select [3D - Top /  
bottom].  
Note: If available, select the inverted format  
if the normal format results in strange 3D  
effects.  
2D to 3D conversion  
You can convert any 2D programme to  
watch it in 3D.  
1. Press ADJUST.  
2. Select [3D] > [2D to 3D conversion].  
To stop the 2D to 3D conversion:  
1. Press ADJUST.  
2. Select [3D depth on/off] > [Off], then  
press OK.  
Watch content  
Select a source with 3D  
For 3D discs:  
1. Play the disc on a 3D Blu-ray disc player  
that is connected to the TV HDMI  
connector.  
You can also switch to another activity from  
the Home menu to stop the 2D to 3D  
conversion. If you switch to another channel,  
the conversion does not stop.  
Switch off 3D  
If you switch to another connected device or  
a new activity, the TV switches back to 2D.  
2. Press , then select the 3D Blu-ray disc  
player.  
For 3D TV programmes:  
Select [Watch TV] and switch to a TV  
channel that broadcasts 3D content.  
Switch on 3D  
You can switch off 3D while watching a 3D  
programme.  
1. Press ADJUST.  
2. Select [3D depth on/off] > [Off], then  
press OK.  
The programme is displayed in 2D, showing  
only the left side of the 3D picture.  
The first time that the TV detects a  
broadcast 3D signal, an onscreen message  
will prompt you to choose your preference.  
If you want the TV to switch to 3D  
automatically, select [Automatic].  
If there is no 3D signal, the 3D glasses switch  
off automatically after 5 seconds.  
If you want to be notified first, select  
[Notify].  
If you don't want to be notified, select  
[No 3D].  
Start 3D  
The TV detects when 3D is available and  
prompts you to put on your 3D glasses. Put  
on the glasses and switch them on. If the TV  
cannot detect the 3D signal due to a missing  
3D signal tag, it displays images that overlap.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Play files from USB  
If you have photos, videos or music files on a  
USB storage device, you can play the files on  
TV.  
View media  
What you can do  
You can play videos, photos and music on  
your TV from:  
Caution:  
TP Vision is not responsible if the USB  
hard drive is not supported, nor is it  
responsible for damage to or loss of  
data in the device.  
Your computer, connected through the  
home network  
A USB device connected to the TV  
Do not overload the USB port. If you  
connect a USB storage device that  
consumes more than 500mA power,  
make sure that it is connected to its  
own external power supply.  
Play files from computer  
What you need  
A wired or wireless home network,  
connected with a Universal Plug and  
Play (uPnP) router  
View USB contents  
1. Connect the USB device to the USB  
connector on the TV.  
2. Press , select [Browse USB], then press  
OK.  
3. Select a file from the content browser,  
then press OK to start play.  
4. Press the Play buttons on the remote  
A LAN cable that connects your TV to  
your home network  
A media server program running on  
your computer  
Appropriate settings on your computer  
firewall to allow you to run the media  
server program  
control to control play.  
Set up the network  
1. Connect your TV and the computer to  
the same home network. See Connect your  
TV > Network and the Internet (Page 55).  
Play options  
Watch video  
Press the Navigation buttons to select a  
video file, then press OK.  
2. Switch on your computer and the router.  
Set up media sharing  
Press to pause video.  
Press to stop video.  
1. Install a media server program on your  
computer to share media files. Some of the  
media server programs available are as  
follows:  
Press  
or  
to search forward or  
backward within a video.  
Press CH - / CH + to skip to the  
previous or next video.  
Press and hold to exit the content  
browser.  
For PC: Windows Media Player 11 (or  
higher) or TVersity  
For Mac: Twonky  
2. Switch on media sharing on your  
Video playback options  
While you play video, press OPTIONS to  
access the following video options:  
computer using the media server. For more  
information on how to set up the media  
server, refer to the media server's website.  
[Stop]: Stop playback.  
Play files  
1. Press on the remote control.  
2. Select [Your network], then press OK. If  
the network installation starts, follow the  
onscreen instructions.  
[Repeat]: Repeat a video.  
[Shuffle on] / [Shuffle off]: Enable or  
disable random play of videos.  
[Show info]: Display the file  
information.  
3. Select a file from the content browser,  
then press OK to start play.  
Listen to music  
Press the Navigation buttons to select a  
music track, then press OK.  
4. Press the Play buttons on the remote  
control to control play.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
[Set as Scenea]: Set the selected  
picture as wallpaper on TV. See Use  
more of your TV > View Scenea >  
Load TV wallpaper (Page 35).  
Press to pause.  
Press to stop.  
Press  
or  
to search forward or  
backwards within a music track.  
Press CH - / CH + to skip to the  
previous or next video.  
Press and hold to exit content  
browser.  
Browse Smart TV  
Music playback options  
Press OPTIONS to access or exit the  
following music options:  
What you can do  
With Internet Applications (apps), which are  
specially adapted Internet websites for your  
TV, you can enjoy these features and more:  
[Stop]: Stop audio play.  
[Repeat]: Repeat a track or an album.  
[Play once]: Play the track once.  
[Shuffle on] / [Shuffle off]: Enable or  
disable random play of tracks.  
[Show info]: Display the file  
information.  
Read newspaper headlines  
Watch and rent videos  
Check weather forecasts  
Catch up with TV programmes that  
you missed  
Find out more on Smart TV services from  
the Smart TV forum website,  
View pictures  
Press the Navigation buttons to select a  
picture, then press OK to start the  
slideshow.  
Note:  
Smart TV services and apps vary from  
country to country.  
Press to pause.  
Press to stop.  
To pause or stop the slideshow, press  
OK.  
Availability of catch-up TV apps and  
their TV programmes is subject to your  
TV's country setting. To find out which  
TV programmes are available, access  
the TV programme guide within the  
app.  
To skip to the previous or next file,  
press CH - or CH +.  
Press and hold to exit the content  
browser.  
Smart TV displays one page at a time, in  
full screen.  
Certain websites may not display  
completely. Functions that require plug-  
ins may be unavailable.  
Picture slideshow options  
Press OPTIONS to access or exit the  
following picture options:  
[Show info]: Display the file  
information.  
TP Vision Netherlands B.V. bears no  
responsibility regarding the content and  
the quality of the content provided by  
the content service providers.  
[Stop]: Stop slideshow.  
[Rotate]: Rotate the file.  
[Repeat]: Repeat the slideshow.  
[Play once]: Play the file once.  
[Shuffle off] / [Shuffle on]: Enable or  
disable random display of pictures in  
the slideshow.  
What you need  
1. On your home network, connect the TV  
to the Internet.  
[Slideshow speed]: Set the display time  
for each picture in the slideshow.  
[Slideshow transition]: Set the  
transition from one picture to the next.  
2. On your TV, configure Smart TV.  
3. (Optional) On your PC, register with  
Philips to enjoy exclusive benefits and  
receive updates on product information. You  
can register at any time.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connect the TV to the Internet  
Access Smart TV Applications  
(Apps)  
You can access apps through the Smart TV  
home page. The icons on this page represent  
the apps installed on your TV.  
1. On your home network, connect a router  
with a high-speed connection to the  
Internet.  
2. Switch on the router.  
3. Install the network. See Connect your TV  
> Network and the Internet (Page 55).  
Press the Navigation buttons to select  
an app for access, then press OK to  
confirm.  
Select [App Gallery] to add more apps  
to your home screen.  
Browse Internet websites with Internet  
apps.  
Read the Smart TV quick guide on the  
Smart TV home page for more  
information.  
Start Smart TV  
1. Press , select [Smart TV], then press  
OK.  
The terms and conditions of use are  
displayed.  
2. Follow the onscreen instructions to  
complete registration.  
Add apps  
1. Select [App Gallery], then press OK.  
2. Use the Navigation buttons to search for  
apps.  
3. Select an app, then press OK to add it to  
your home screen.  
Tips:  
You can also press SMART TV on the  
remote control to access Smart TV.  
You can search for apps available in  
other countries.  
Note: The first time you start Smart TV, a  
prompt asks if you want to enable parental  
control to lock adult apps. If you lock an  
adult app, advertisements and web pages  
that are not adapted for Smart TV will  
remain accessible.  
To return to the Smart TV home page,  
press LIST.  
Note: Smart TV services are updated  
automatically. To view the latest updates,  
change [All] to [New] in [App Gallery].  
Access websites  
1. Select an Internet app, then press OK.  
2. Select the web address field, then press  
OK.  
A keyboard appears on the screen.  
3. Press the Navigation buttons and OK to  
enter each character of the web address.  
Tip: You can also use the Numeric buttons  
on the TV remote control to enter a web  
address.  
Zoom page  
To zoom in and out on an Internet page, do  
the following:  
1. Press OPTIONS, then press [Zoom  
page].  
2. Use the slider bar to set the enlargement.  
3. Use the Navigation buttons to jump  
between highlighted items and scroll through  
an Internet page.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scroll pages  
Press P+ and P- to scroll up and down on a  
web page.  
Rent online videos  
What you can do  
With this TV, you can rent a video from  
online video store apps in Smart TV. You  
can rent a video using the following steps:  
Reload page  
If a page does not load correctly, press  
OPTIONS, then select [Reload page].  
1. Open a video store app. You may need to  
register or enter your log-in information.  
2. Select a video.  
3. Make the online payment.  
4. Download the video for viewing.  
5. Start watching the video.  
View security info  
To view security information about a page,  
press OPTIONS, then select [Security  
info].  
Smart TV options  
Press OPTIONS and access any of the  
following items to modify the apps from the  
Smart TV home screen:  
What you need  
Make sure that your TV is connected to  
the Internet through a high-speed  
broadband connection. See Connect  
your TV > Network and the Internet  
[Remove App]  
[Lock App]  
[Unlock App]  
[Move App]  
Connect a USB flash drive with a  
minimum capacity of 4 GB to the TV.  
For high-definition videos, use a flash  
drive with at least 8 GB of storage  
capacity.  
Clear Smart TV memory  
You can clear the Smart TV memory  
completely, including your favourites,  
parental control code, passwords, cookies  
and history.  
Note: You can also use a single storage  
device to record, pause and rent videos.  
Connect a USB 2.0 compatible hard disk  
drive (HDD) with a minimum capacity of  
250 GB and a minimum transfer speed of 30  
megabytes per second. See Use more of  
your TV > Record TV shows > Install USB  
hard drive.  
Warning: This option resets the Smart TV  
memory completely. It also deletes the  
settings of other interactive applications such  
as MHEG, HbbTV, and MHP.  
1. Press  
.
2. Select [Setup] > [Network settings].  
3. Select [Clear Apps memory], then press  
OK.  
Format the USB flash drive  
Before you download rented videos, your  
USB drive must be formatted. All existing  
content on the USB drive is erased.  
1. Switch on the TV.  
2. Connect the USB flash drive to a USB slot  
on the TV.  
3. Press to start formatting the drive.  
4. After formatting, leave the USB drive  
connected to the TV.  
Access a video store  
1. Press > [Smart TV], then press OK.  
You can also press SMART TV on the  
remote control.  
2. Access the [App Gallery] to search for  
available video store apps in your country.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press the Navigation buttons to select a  
store, then press OK to confirm.  
The icon of the video store is added to the  
Interactive TV  
home page.  
4. To view a store, select its icon and press  
OK.  
What you can do  
With interactive TV, you can view additional  
information or entertainment pages provided  
by digital TV broadcasters. You can  
experience true interactivity by responding  
directly to the digital content.  
Rent a video  
To rent a video, open the video store app  
and locate the video. Follow the onscreen  
instructions to rent, pay for and download  
the video.  
Note: You cannot download files to your TV  
with this feature.  
Note: The way you select and rent a video  
varies from store to store. Consult the video  
store website for more information.  
Broadcasters use various interactive TV  
systems such as:  
HbbTV (Hybrid Broadcast Broadband  
TV)  
Payment  
The store prompts you to log in or to open  
a new account if you do not have one. The  
login might consist of your email address and  
a personal PIN code. When you are logged  
in, you can select the payment method, a  
credit card, or a value code in most cases.  
iTV (Interactive TV - MHEG)  
MHP (Multimedia Home Platform)  
DTVi (Digital TV interactive)  
Visit the broadcaster's website for more  
information to see which interactive system  
is available in your country.  
Download the video  
When you have paid, you can download the  
video on to the video memory. While the  
video downloads, you can continue watching  
a TV programme until the TV notifies you  
that the video is ready to play.  
Here are some examples of interactive  
activities you can enjoy:  
View information about TV  
programmes  
Take part in a quiz or competition  
Play games  
Shop online  
Pay for a video-on-demand (VOD)  
If you cancel a download, you can still return  
to download the video before the rental  
period expires.  
Watch video  
programme  
1. Press SMART TV on the remote control  
to access Smart TV.  
The installed video stores are displayed on  
the home screen.  
2. Select the video store where you rented  
the video, then press OK.  
Vote  
Chat  
What you need  
To enjoy this service, you need the following:  
digital channels with interactive services  
A wired or wireless home network,  
connected with a Universal Plug and  
Play (uPnP) router  
3. With your log-in information, enter the  
online video store.  
4. Select the video from the list of  
downloaded videos, then press OK to play.  
For network connection, see Connect your  
TV > Network and the Internet (Page 55).  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Access interactive TV  
Most channels that offer interactive services  
invite you to press the Red button or OK to  
open their interactive programme.  
1. Switch to a digital channel with interactive  
services.  
While the application is loading, a blinking  
symbol is displayed. When the application  
has loaded, an icon is displayed.  
2. Press the Red button or OK to launch  
the interactive application.  
3. Follow the onscreen instructions.  
4. Press or the onscreen button to close  
the interactive page.  
To navigate the interactive pages, use:  
The Navigation buttons  
The Colour buttons  
The Numeric buttons  
To control video play within interactive  
pages, press:  
to play  
to pause  
to stop  
To block HbbTV on a channel:  
1.Press OPTIONS.  
2. Select [HbbTV on this channel] > [Off].  
To block HbbTV on all channels:  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [HbbTV] > [Off].  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not overload the USB port. If you  
connect a USB hard drive device that  
consumes more than 500mA power,  
make sure that it is connected to its  
own external power supply.  
3 Use more of  
your TV  
1. Make sure that the TV and the USB hard  
drive are switched off.  
2. Make sure that there are no other USB  
devices connected to the TV.  
3. Connect the USB hard drive directly to  
the TV, or if you intend to connect other  
USB devices in future, connect the USB hard  
drive through a USB hub.  
Pause TV  
What you can do  
While you watch a digital channel, you can  
pause a programme to answer a phone call  
or to have a break. The broadcast is stored  
on a USB hard drive that is connected to the  
TV. You can resume playback of the  
programme at any time.  
Note: While you are formatting the USB  
hard drive, do not connect other USB  
devices to the TV.  
Note:  
You can pause a programme for a  
maximum of 90 minutes.  
What you need  
Tune your TV to receive digital  
channels. See Set up your TV >  
Channel settings > Automatic install  
Connect a USB 2.0 compatible hard  
drive with a minimum capacity of 32  
GB and a minimum transfer speed of  
30 MB per second.  
Install USB hard drive  
To pause TV, you must connect a USB hard  
drive to the TV and format it.  
4. Switch on the TV and the USB hard drive,  
if it has an external power source.  
5. Switch to a digital TV channel.  
6. Press to start formatting.  
7. Follow the onscreen instructions to  
complete the formatting process.  
If the TV does not recognise the USB hard  
drive, use a PC to format it to NTFS file  
system, then try again.  
Caution:  
TP Vision is not responsible if the USB  
hard drive is not supported, nor is it  
responsible for damage to or loss of  
data in the device.  
Warning: The formatting process may take  
some time. Do not switch off the TV or  
disconnect the USB hard drive until this  
process is complete.  
Formatting removes all data from the  
connected USB hard drive.  
The USB hard drive is formatted  
exclusively for this TV. Keep it  
permanently connected to the TV. You  
cannot access the USB hard drive  
contents from another TV or PC.  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Pause a live TV broadcast  
Record TV shows  
What you can do  
If your TV is connected to the Internet, you  
can record TV programmes onto a USB  
hard drive. You can either record current TV  
programmes or a future TV programme.  
Start and manage the recordings from the  
electronic programme guide on the TV. See  
Use your TV > View programme guide >  
From the Internet (Page 16).  
Note:  
Recording is only supported in  
countries with Internet programme  
guides and when your TV is connected  
to the Internet.  
1. On a digital channel, press to pause a  
TV programme.  
2. Press to continue watching.  
In Nordic countries, the TV provides  
limited support for subtitles while  
recording TV programmes.  
The status bar shows the following time  
indicators:  
What you need  
To record TV programmes, do the following:  
A. When the programme was paused for  
the first time.  
B. Where the paused programme is  
currently playing.  
C. Where the live programme is currently  
Tune your TV to receive digital TV  
channels (DVB broadcast or similar).  
See Set up your TV > Channel  
Settings > Automatic installation (Page  
Make sure that your TV is connected to  
the Internet through a high-speed  
broadband connection. See Connect  
your TV > Network and the Internet  
broadcast.  
To watch the stored broadcast, press  
or  
to search backward or  
forward.  
To change playback speed, press  
repeatedly.  
To watch the live TV broadcast, press  
.
or  
Connect a USB 2.0 compatible hard  
disk drive (HDD) with a minimum  
capacity of 250 GB and a minimum  
transfer speed of 30 megabytes per  
second.  
Note: You cannot pause the TV broadcast  
when a recording is in progress.  
The stored broadcast on the USB hard  
drive is deleted if you do any of the  
following:  
Note: You can use the same HDD to  
record and Pause TV shows.  
Disconnect the USB hard drive.  
Start recording a TV programme.  
Access Smart TV  
Switch the TV to standby.  
Switch to another channel.  
Switch source to watch from a  
connected device - a Blu-ray disc player,  
digital receiver or USB storage device.  
To check if the programme guide supports  
recording:  
Press and select [Programme guide].  
If you find the [TV Recording] button on  
the programme guide page, you can set up  
and manage recordings.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If you can't see the [TV Recording] button,  
Note: While you are formatting the USB  
hard drive, do not connect other USB  
devices to the TV.  
make sure that the programme guide data is  
set to be updated through the network.  
Select > [Setup] > [TV settings] >  
[Preferences] > [Programme guide] >  
[From network].  
Install USB hard drive  
To record TV shows, you must connect a  
USB hard disk to the TV and format it.  
If the TV does not recognise the USB hard  
drive, use a PC to format it to NTFS file  
system, then try again.  
Caution:  
TP Vision is not responsible if the hard  
disk is not supported, nor is it  
responsible for damage to or loss of  
data in the device.  
Formatting removes all data from the  
connected hard disk.  
4. Switch on the TV and the USB hard drive,  
if it has an external power source.  
5. Switch to a digital TV channel.  
6. Press to start formatting.  
7. Follow the onscreen instructions to  
complete the formatting process.  
The USB hard drive is formatted  
exclusively for this TV. Keep it  
permanently connected to the TV. You  
cannot access the USB hard drive  
contents from another TV or PC.  
Do not overload the USB port. If you  
connect a USB hard drive device that  
consumes more than 500mA power,  
make sure that it is connected to its  
own external power supply.  
Warning: The formatting process may take  
some time. Do not switch off the TV or  
disconnect the USB hard drive until this  
process is complete.  
Start recording  
One-touch recording  
1. Make sure that the TV and the USB hard  
drive are switched off.  
To record the programme you are currently  
watching, you can use the button on the  
remote control:  
2. Make sure that there are no other USB  
devices connected to the TV.  
3. Connect the USB hard drive directly to  
the TV, or if you intend to connect other  
USB devices in future, connect the USB hard  
drive through a USB hub.  
1. While you watch TV, press  
.
Recording starts immediately. A pop-up  
window is displayed, where you can select  
the time when the recording ends.  
2. Select [Schedule], then press OK to  
confirm the end time.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme information  
To stop recording at any time, press  
.
To view more information about a  
programme, select the programme from the  
programme guide and press OK. Depending  
on the status of this programme, you can  
start watching it, schedule its recording, play  
back the recording, or delete the recording  
from this page.  
Note:  
While recording, you cannot switch TV  
channels.  
While recording, you cannot pause the  
TV broadcast.  
Schedule a TV programme recording  
You can schedule a recording of an  
upcoming programme that will be broadcast  
today or in up to eight days' time.  
Watch recordings  
After you've recorded a TV programme, you  
can watch it.  
1. Press and select [Programme guide].  
2. Select the channel and programme to  
record.  
1. Press , select [Programme guide] > [{0}  
Recordings], then press OK.  
A list of recordings is displayed.  
2. Select a recording from the list, then press  
OK.  
To scroll through programmes, use the  
Navigation buttons.  
To select a channel, enter the channel  
number.  
To change the date, select the date at  
the top of the page, then press OK.  
The recording starts to play.  
Note: In [{0} Recordings], the number in  
brackets changes according to the number of  
complete recordings available. If you see [TV  
Recording] instead, no recordings are  
Select a date from the pop-up window,  
then press OK.  
3. Select the programme, press  
OPTIONS, then select [Record].  
4. To record beyond the time when the  
programme is scheduled to end, change the  
recording time.  
complete.  
You can control play with the Play buttons  
on the remote control:  
To play or pause, press or  
To search forward or backwards, press  
or  
To stop, press  
.
5. Select [Schedule] then press OK. The  
.
programme is scheduled for recording.  
If you schedule overlapping recordings, a  
warning is displayed.  
.
Note:  
If you schedule recordings while you are  
away, make sure that you leave the TV in  
standby and keep the USB hard drive  
switched on.  
If a broadcaster limits the number of  
days that a recording can be viewed  
after the programme has been  
broadcast, the list of recordings shows  
the number of days before the  
recording expires.  
If a recording has expired or if a  
broadcaster restricts playback, the  
recording cannot be played.  
Schedule a timed recording  
To schedule a timed recording that is not  
linked to any programme:  
1. Press , then select [Programme guide].  
2. Press OPTIONS, select [Manual  
record], then press OK.  
3. Select the channel, date and time span in  
the dialogue box.  
4. Select [Schedule], then press OK.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manage recordings  
Game setting  
To manage your recordings, view the list of  
complete and scheduled recordings.  
You can optimise the TV display for gaming  
without picture lag with the [Game] option  
in the [Smart picture] settings.  
1. Press , then select [Programme guide] >  
[{0} Recordings], then press OK.  
A list of recordings is displayed.  
If you add the game console to the  
Home menu as [Game console], the  
TV switches to the game setting  
automatically.  
Note: In [{0} Recordings], the number in  
brackets shows the number of complete  
recordings. If you see [TV Recording]  
If your game console is automatically  
added to the Home menu as a Blu-ray  
disc player or DVD player, set the  
[Smart picture] setting to [Game]  
before you start playing.  
instead, no recordings are complete.  
From this list, you can:  
Select a recording to watch  
Delete a recording  
Schedule a timed recording  
Cancel a scheduled recording  
Check the remaining hard disk space  
Switch to Game setting  
1. Press ADJUST.  
2. Select [Smart picture] > [Game], then  
press OK. The TV is ready for gaming.  
Cancel a scheduled recording  
1. Select the recording, then press  
OPTIONS.  
Note: When your gaming session ends,  
switch back to your usual [Smart picture]  
setting.  
2. Select [Cancel recording] and press OK.  
Start a two-player game  
Available for certain models only.  
Delete a recording  
1. Select the recording, then press  
OPTIONS.  
Some games offer multi-player and split-  
screen gaming. With the 3D technology of  
this TV, you can set the split-screen to  
display as two full screen views. Two players  
watch the same TV but see two different  
screens to play the game. To view each  
screen, you need a pair of gaming glasses for  
each player.  
2. Select [Delete recording], then press OK.  
Failed recordings  
If a scheduled recording is prevented by the  
broadcaster or if the recording does not  
occur as per schedule, it is marked as  
[Failed] in the recordings list.  
What you need  
Play games  
Use two pairs of Philips 3D Max active  
glasses - PTA507 (sold separately). See  
the user manual of the glasses for  
information on how to turn on the  
glasses and charge them.  
Add a game console  
You can play games projected on your TV.  
Before you start, connect your game console  
to this TV. Read Connect your TV >  
Connect devices > Game console (Page  
Connect the game console to the  
HDMI connector on this TV.  
Start a two-player game  
1. Select the game console in the Home  
menu, then press OK.  
2. On the game console, start the game and  
select the multi-player or two-player mode.  
Select the mode for split-screen viewing.  
3. On the TV remote control, press  
ADJUST, then select [Two-player gaming].  
For easy access, add the game console to  
the Home menu.  
1. Press  
.
2. Select [Add your devices] > [Game  
console], then press OK.  
3. Follow the onscreen instructions to add  
the game console.  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Select the format in which the split-screen  
game is displayed: [Side by side] or [Top /  
bottom].  
5. Press OK.  
The TV shows the two screens as full  
screens.  
Text options  
1. While you view text, press OPTIONS.  
2. Select an option:  
[Freeze page] / [Unfreeze page]:  
Freeze or unfreeze the current page.  
[Dual screen] / [Full screen]: Enable or  
disable dual screen text. Dual screen  
displays both the current channel and  
the text broadcast on two halves of the  
TV screen.  
To switch the glasses to watch the Player 1  
or Player 2 screen, switch on the glasses and  
press the player selection key.  
Switch between normal and split-screen  
view  
In two player split-screen view, you can  
switch back and forth from split-screen to  
the combined view, to be able to read the  
game menu or game scores.  
[T.O.P. overview]: Table Of Pages  
(T.O.P.) text broadcasts allow you to  
jump from one subject to another  
without entering page numbers.  
[Enlarge] / [Normal view]: Zoom in on  
the page. Press the Navigation buttons  
to move around the enlarged view.  
[Reveal]: Hide or reveal hidden  
information on a page, such as solutions  
to riddles or puzzles.  
To switch views back and forth, press OK  
on the remote control of the TV.  
To stop the two player split-screen  
view, press , then select another  
activity.  
To switch back to watching 3D content  
from a DVD player, press ADJUST.  
Select [Two-player gaming] > [Off],  
then press OK.  
[Cycle subpages]: If subpages are  
available, each is shown automatically.  
[Language]: Switch to a different  
language group to correctly display  
different character sets.  
3. Press OPTIONS to exit.  
View Text  
Text language  
Select a page  
While you watch channels that broadcast  
text, you can view the text.  
For digital TV channels where the  
broadcasters provide different text  
languages, you can select your preferred  
primary and secondary languages.  
1. Select a channel that broadcasts text, then  
press TEXT.  
2. Select a page in one of the following ways:  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
Enter the page number with the  
3. Select [Languages] > [Primary Text] or  
[Secondary Text].  
4. Select a language, then press OK.  
Numeric buttons.  
Press CH + / CH - to view the next or  
previous page.  
Press the Colour buttons to select a  
Subpages  
colour coded item.  
If the text page contains several subpages,  
you can view each subpage in succession.  
These subpages are shown on a bar next to  
the main page number.  
3. Press to exit.  
If subpages are available, press or to  
select them.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Search  
Set locks and timers  
You can search for a word or number that  
exists on the current text page.  
Clock  
1. While you are viewing text, press OK to  
highlight the first word or number.  
2. Press the Navigation buttons to skip to  
the word or number to search.  
You can display a clock on the TV screen.  
The clock displays the time that is broadcast  
by your TV service operator.  
3. Press OK to begin the search.  
Display the TV clock  
4. To exit the search, press until no word  
or number is highlighted.  
1. While you watch TV, press OPTIONS.  
2. Select [Status], then press OK.  
The clock is displayed on the lower right  
hand corner of the TV screen.  
Digital text  
Change the clock mode  
You can change the clock mode to  
automatic or manual. By default, it is set to  
automatic mode, which synchronises it to  
Coordinated Universal Time (UTC). If your  
TV cannot receive UTC transmissions,  
change the clock mode to [Manual].  
If a digital TV channel's broadcaster offers  
dedicated digital text or interactive services,  
you can view digital text. Such channels, such  
as BBC1, may have digital text with more  
interactive features.  
Note: Digital text services are blocked when  
subtitles are broadcast and switched on.  
Read Set up your TV > Language settings >  
Subtitles on digital channels (Page 42).  
1. While you watch TV, press  
2. Select [Setup] > [TV settings] >  
[Preferences].  
3. Select [Clock] > [Auto clock mode].  
4. Select [Automatic], [Manual] or [Country  
dependent], then press OK.  
.
When in digital text:  
Press the Navigation buttons to select  
or highlight items.  
Press the Colour buttons to select an  
option, then press OK to confirm or  
activate.  
Enable or disable daylight saving time  
You can enable or disable daylight saving  
time depending on your region. Before you  
enable/disable daylight saving time, set the  
clock mode to [Country dependent].  
1. In the [Clock] menu, select [Daylight  
saving] > [Daylight saving time] or  
[Standard time], then press OK. Daylight  
saving time is enabled or disabled.  
Set the clock manually  
Text 2.5  
With Text 2.5, you can view text with more  
colours and better graphics than normal text.  
If Text 2.5 is broadcast by a channel, it is  
switched on by default.  
To switch Text 2.5 on or off  
1. Press  
.
You can set the date and time manually.  
Before you start, set the clock mode to  
[Manual].  
2. Select [Setup] > [TV settings] >  
[Preferences].  
3. Select [Text 2.5] > [On] or [Off], then  
press OK.  
1. In the [Clock] menu, select [Date] or  
[Time], then press OK.  
2. Use the Navigation buttons to make  
your selection.  
3. Select [Done], then press OK.  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sleeptimer  
Parental rating  
You can switch the TV to standby after a  
specified time. During the countdown to the  
specified time, you can switch off your TV  
earlier or reset the sleeptimer.  
You can set your TV to display only  
programmes with age ratings lower than  
your child's age. This restriction only applies  
to digital channels from broadcasters that  
rate their programmes according to age.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Sleeptimer].  
3. Press the Navigation buttons to set the  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
3. Select [Child lock] > [Parental rating].  
sleeptimer.  
The sleeptimer can be set up to 180  
minutes, in steps of ten minutes. To switch  
off the sleeptimer, set it to zero minutes.  
4. Press OK to activate the sleep timer.  
A message prompts you to enter the child  
lock code.  
4. Enter the child lock code with the  
Numeric buttons.  
5. Select an age rating, then press OK.  
All programmes above the selected age  
rating are blocked.  
After the specified time, the TV switches to  
standby.  
Child lock  
To protect children from unsuitable TV  
programmes, you can lock the TV or block  
age-rated programmes.  
For information on child lock codes, see Use  
more of your TV > Set locks and timers >  
Child lock (Page 32).  
Set or change the child lock code  
Use EasyLink  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Child lock].  
3. Select [Set code] or [Change code].  
4. Enter the code with the Numeric  
buttons.  
What you can do  
You can get the most out of your HDMI-  
CEC-compliant devices with Philips EasyLink  
enhanced control features. Connect your  
HDMI-CEC compliant devices through  
HDMI to your TV and control them at the  
same time with your TV remote control.  
Tip: If you forget your code, enter '8888' to  
override any existing codes.  
Lock or unlock channels  
1. In the child lock menu, select [Channel  
lock].  
2. Enter the child lock code with the  
Numeric buttons. The [Channel lock] menu  
Note: Other brands describe HDMI-CEC  
functionality differently. Some examples are  
Anynet (Samsung), Aquos Link (Sharp) or  
BRAVIA Sync (Sony). Not all brands are fully  
compatible with Philips EasyLink.  
appears.  
3. Select channels to lock or unlock.  
After you have switched on Philips EasyLink,  
the following features are available:  
One-touch play  
When you play an HDMI-CEC compliant  
device, the TV switches on from standby and  
switches to the correct source.  
One-touch standby  
When you press on the TV remote  
control, the TV and all HDMI-CEC  
compliant devices switch to standby mode.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EasyLink remote control  
You can control multiple HDMI-CEC  
compliant devices with your TV remote  
control.  
Control devices simultaneously  
If you connect multiple HDMI-CEC devices  
that support this setting, you can control all  
such devices through the TV remote control.  
System audio control  
Note: This is an advanced setting. Devices  
that do not support this setting will not  
respond to the TV remote control.  
If you connect an HDMI-CEC compliant  
device that includes speakers through the  
HDMI ARC connector, you can choose to  
hear the TV audio from those speakers  
instead of the TV speakers.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink].  
Synchronise audio  
3. Select [EasyLink Remote Control] >  
[On] or [Off].  
4. Press OK to activate.  
If you connect your TV to a home theatre,  
you can synchronise the audio and video to  
avoid lag between the picture and sound.  
Tips:  
Retain picture quality  
To switch back to TV control, press  
then select [Watch TV].  
,
If your TV picture quality is affected by the  
picture-processing features of other devices,  
you can switch on Pixel Plus Link to retain  
picture quality.  
To control another device, press  
,
then select the device from the Home  
menu.  
Maximise display for subtitled video  
Some video subtitles can create a separate  
subtitle bar under the video, which limits the  
video display area. To maximise the video  
display area, you can switch on auto subtitle  
shift and display the subtitles on top of the  
video image.  
To exit, press  
.
EasyLink buttons  
You can control HDMI-CEC compliant  
devices with the following buttons on the TV  
remote control:  
: Switch the TV and the connected  
device on or to standby.  
Play buttons: Control video or music  
Listen to another device when TV is in  
standby  
You can listen to a connected HDMI-CEC  
compliant device through the TV speakers,  
even when the TV is in standby.  
play.  
Numeric buttons: Select a title, chapter  
or track.  
OK: Start, pause or resume play on the  
connected device, activate a selection,  
or access the device menu.  
What you need  
Connect at least two HDMI-CEC  
compliant devices through HDMI. See  
Connect your TV > About cables >  
HDMI (Page 45).  
/
: Search backwards and  
forwards on the connected device.  
: Display the TV Home menu.  
Configure each HDMI-CEC compliant  
device properly  
Switch on EasyLink  
You can also control devices through other  
EasyLink buttons that are available through  
the On-Screen Remote Control (OSRC).  
Switch on EasyLink  
1. Press  
2. Select [Setup] > [TV settings] >  
[EasyLink].  
To access the OSRC  
1. While you view content from a connected  
device, press OPTIONS.  
2. Select [Show device keys], then press  
OK.  
.
3. Select [On] or [Off], then press OK.  
3. Select an onscreen button, then press OK.  
4. Press to exit.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
With HDMI ARC compliant device  
If an HDMI-ARC compliant device is  
connected through the HDMI ARC  
connector to the TV, you can output TV  
audio through the HDMI cable. You will not  
need an additional audio cable.  
Select speaker output  
If a connected device is HDMI CEC  
compliant, you can output TV audio through  
an HDMI cable. Additional audio cables are  
not required. Make sure that you connect  
the device to the HDMI connector on the  
TV. See Connect your TV > About cables  
> HDMI (Page 45).  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink].  
Configure TV speakers  
3. Select [HDMI 1 - ARC].  
4. Select one of the following, then press  
OK.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [TV speakers].  
[On]: Hear the TV audio through the  
connected ARC compliant device.  
[Off]: Hear the TV audio through the  
TV speakers, or through a device  
connected through the digital audio out  
connector.  
3. Select an option, then press OK:  
[Off]: Switch off TV speakers.  
[On]: Switch on TV speakers.  
[EasyLink]: Stream TV audio through  
the connected HDMI-CEC device.  
Switch the TV audio to the connected  
HDMI-CEC audio device through the  
Adjust menu.  
5. Control playback with the TV remote  
control play buttons.  
[EasyLink autostart]: Turn off TV  
speakers automatically and stream TV  
audio to the connected HDMI-CEC  
audio device.  
Synchronise audio  
If your TV is connected to a home theatre  
system (HTS) and there is a lag between the  
picture and the sound, you can synchronise  
them.  
Select speaker output with the adjust menu  
If [EasyLink] or [EasyLink autostart] are  
If you are using a Philips HTS, the audio  
and video are automatically  
selected, you can access the Adjust menu to  
switch the TV audio.  
1. While you watch TV, press ADJUST.  
2. Select [Speakers], then press OK.  
3. Select one of the following, then press  
OK:  
synchronised.  
For other HTS brands, you need to  
switch on the audio sync delay on the  
TV to synchronise the audio and video.  
Switch on Audio Out Delay  
1. Press  
[TV]: On by default.  
.
Stream TV audio through TV and the  
connected HDMI-CEC audio device  
until the connected device switches to  
system audio control. TV audio is then  
streamed through the connected  
device.  
2. Select [Setup] > [TV settings] >  
[Preferences].  
3. Select [Audio Out delay] > [On], then  
press OK.  
Retain picture quality  
[Amplifier]: Stream audio through the  
If your TV picture quality is affected by the  
picture-processing features of other devices,  
you can switch on Pixel Plus Link.  
connected HDMI-CEC device. If system  
audio mode is not enabled on the  
device, audio continues to stream from  
the TV speakers. If [EasyLink autostart]  
was selected, the TV prompts the  
connected device to switch to system  
audio mode.  
Switch on Pixel Plus Link  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink].  
3. Select [Pixel Plus link] > [On], then press  
OK.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maximise video display  
View Scenea  
Some subtitles create a separate subtitle bar  
under the video, which limits the video  
display area. To maximise the video display  
area, you can switch on auto subtitle shift.  
The subtitles are then displayed over the  
video image.  
What you can do  
With Scenea, you can display a picture as the  
wallpaper on your TV. Display the default  
picture or load your own picture as the  
wallpaper.  
Switch on auto subtitle shift  
The wallpaper is displayed for 240 minutes  
or for the duration of the sleeptimer.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [Auto subtitle shift].  
3. Select [On], then press OK to activate.  
Switch on  
Note: Make sure that the picture format of  
the TV is set to [Auto format] or [Movie  
expand 16:9].  
1. Press  
.
2. Select [Scenea], then press OK.  
The default picture is displayed.  
Note: The wallpaper is displayed for 240  
minutes or for the duration of the  
sleeptimer. For information about the  
sleeptimer, see Use more of your TV > Set  
locks and timers > Sleeptimer (Page 32).  
Listen to another device while TV  
is in standby  
You can listen to a connected HDMI-CEC  
compliant device through the TV speakers,  
even while the TV is in standby.  
1. Press ADJUST to receive audio from  
the connected Philips EasyLink device.  
If available, audio only mode is switched on.  
2. Accept the prompt on the TV to turn off  
the TV screen.  
Load TV wallpaper  
You can also load your own picture from a  
connected USB storage device or a  
connected PC as the wallpaper.  
Note: When you load a new picture, it  
3. Control the audio playback with the TV  
remote control.  
overrides the existing picture.  
1. Connect the USB storage device to the  
TV or connect to the network.  
2. Press  
.
3. Select [Browse USB] or [Your network],  
then press OK.  
4. Select a picture, then press OPTIONS.  
5. Select [Set as Scenea], then press OK.  
6. Select [Yes], then press OK.  
7. Press any button to exit Scenea.  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
[Pixel Plus HD] / [Pixel Precise HD]*:  
4 Set up your TV  
Control advanced settings to fine-tune  
each pixel to match surrounding pixels.  
This setting produces a brilliant, high-  
definition image.  
Picture and sound  
- [HD Natural Motion]*: Reduce  
motion judder and reproduce smooth  
motion.  
Settings assistant  
- [Clear LCD]*: Enable superior  
You can select picture and sound settings  
with the help of the settings assistant, which  
demonstrates the effect of your chosen  
setting immediately.  
motion sharpness, better black level,  
high contrast with a flicker-free, quiet  
image and a larger viewing angle.  
- [Super resolution]: Enable  
superior sharpness, especially on lines  
and contours in the picture.  
1. While you watch TV, press  
.
2. Select [Setup] > [Quick picture and  
sound settings], then press OK.  
3. Select [Start], then press OK.  
4. Follow the onscreen instructions to  
choose your preferred settings.  
- [Dynamic contrast]: Set the level  
at which the TV automatically enhances  
details in the dark, middle and light  
areas of the picture.  
- [Dynamic backlight]: Reduce  
More picture settings  
You can change the settings in the Picture  
menu.  
power consumption by dimming the  
TV backlight to match room lighting  
conditions.  
- [MPEG artefact reduction]:  
1. Press  
.
Smooth the digital transitions in the  
picture.  
2. Select [Setup] > [TV settings] >  
[Picture], then press OK.  
- [Colour enhancement]: Set the  
3. Select a setting to adjust, then press OK.  
colours to be more vivid and improve  
the resolution of details in bright  
colours.  
- [Gamma]: Non-linear setting for  
picture luminance and contrast.  
- [Video contrast]: Change the  
intensity of the bright areas, keeping  
dark areas unchanged.  
[PC mode]: Allow picture settings to  
be changed when a PC is connected to  
the TV through HDMI.  
Note: Options marked with a * are available  
for certain models only.  
[Smart picture]: Access predefined  
smart picture settings.  
[Reset]: Reset to default factory  
settings.  
[Backlight contrast]: Adjust the  
contrast of the TV backlight.  
[Brightness]: Adjust the intensity and  
details of the dark areas.  
[Colour]: Adjust the level of colour  
saturation.  
[Hue]: Compensate colour variations in  
NTSC transmissions.  
[Sharpness]: Adjust sharpness in the  
image.  
[Noise reduction]: Filter and reduce  
noise in the image.  
[Tint]: Adjust the colour balance in the  
image.  
If enabled, you can select [Picture  
format] > [Unscaled] which provides  
maximum detail for display of PC  
content.  
[Light sensor]: Adjust settings  
dynamically to match lighting conditions.  
[Picture format]: Change the picture  
format.  
[Screen edges]: Change the picture  
size.  
[Custom tint]: Customise tint setting.  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
[Picture shift]: Move the position of the  
picture. You cannot select this setting if  
the selected picture format is [Auto  
fill], [Auto zoom] or [Wide screen].  
[3D]*: Change the 3D picture format.  
[3D depth on/off]*: Enable or disable  
3D.  
[Preferred audio format]: Receive  
standard audio format (MPEG) or  
advanced audio formats (AAC, EAC-3  
or AC-3 if available).  
[Mono/Stereo]: If stereo broadcasting is  
available, select mono or stereo audio.  
Reset picture and sound  
You can restore the default picture and  
sound settings, while the channel installation  
settings remain the same.  
[Switch to 3D]*: Specify the way the  
TV switches to 3D.  
More sound settings  
You can change the settings in the Sound  
menu.  
1. While you watch TV, press  
.
2. Select [Setup] > [TV settings] > [Factory  
settings], then press OK.  
1. Press  
.
2. Select [Setup] > [TV settings] > [Sound],  
then press OK.  
3. Select a setting to adjust:  
All TV settings (except for channel settings)  
are reset to the default factory settings.  
[Smart sound]: Access predefined  
smart sound settings.  
[Reset]: Reset to factory default  
settings.  
Channel settings  
Automatic install  
[Bass]: Adjust the bass level.  
[Treble]: Adjust the treble level.  
[Surround]: Enable spatial sound.  
[Headphones volume]: Adjust  
headphone volume.  
[Auto volume leveling]: Automatically  
reduce sudden volume changes, for  
example when switching channels.  
[Balance]: Adjust the balance of the left  
and right speakers.  
When the TV was switched on for the first  
time, a full installation of channels was  
performed. To change your language,  
country and reinstall all available TV  
channels, you can run this full installation  
again.  
Start installation  
1. Press  
.
2. Select [Setup] > [Search for channels] >  
[Reinstall channels], then press OK.  
The country menu is displayed.  
3. Select your country, then press OK.  
[Digital output format]: Select the type  
of audio output through the digital  
audio output connector. Select  
[Stereo] for stereo sound or  
[Multichannel] to output audio to  
home theatre  
4. Select your network, then press OK:  
[Antenna (DVB-T)]: Access free-to-air  
antenna or digital DVB-T channels.  
[Cable (DVB-C)]: Access cable or  
digital DVB-C channels.  
Select audio format  
5. Follow the onscreen instructions to select  
other options, if any.  
The start menu for channel search is  
displayed.  
If a digital TV channel broadcaster streams  
audio in several formats, you can select an  
audio format.  
1. Press  
.
6. Start channel search:  
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Languages].  
3. Select a setting, then press OK.  
If your channel broadcaster has  
instructed you to change settings, select  
[Settings], then press OK. Follow the  
broadcaster's instructions to update the  
settings.  
EN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Otherwise, select [Start], then press  
OK.  
Install digital channels  
NonPublish  
If you know the channel frequency of the  
channels you want to install, you can search  
and store digital channels one-by-one. For  
best results, contact the broadcaster or a  
professional installer.  
7. Once the channel search is complete,  
select [Finish], then press OK.  
8. Once the channel search is complete,  
select [Finish], then press OK.  
Tip: Press LIST to see the channel list.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
3. Select [Digital: Reception test] >  
Note: When digital TV channels are found,  
the list of installed channels may display  
empty channel numbers. You can rename,  
reorder or uninstall these channels.  
[Search], then press OK.  
4. Press the Numeric buttons to enter the  
channel frequency.  
Install analogue channels  
NonPublish  
5. Select [Search], then press OK.  
\
You can search and store analogue TV  
channels one-by-one.  
6. When the channel is found, select [Store],  
then press OK.  
7. Press to exit.  
Step 1: Select your system  
Note: Skip this step if your system settings  
are correct.  
1. While you watch TV, press  
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
Note: If your cable provider does not  
provide you with a specific symbol rate value  
for DVB-C channels, select [Automatic] in  
[Symbol rate mode].  
.
3. Select [Analogue: Manual installation] >  
[System], then press OK.  
4. Select the system for your country or  
region, then press OK.  
Fine-tune analogue channels  
If the reception of an analogue TV channel is  
poor, you can fine-tune the TV channel.  
1. Press  
.
Step 2: Search and store new TV channels  
1. In the [Analogue: Manual installation]  
menu, select [Search channel], then press  
OK.  
2. Select [Setup] > [Channel settings] >  
[Channel installation].  
3. Select [Analogue: Manual installation] >  
[Fine tune], and then press OK.  
4. Press or to fine-tune the channel.  
5. When you have selected the correct  
channel frequency, select [Done], and then  
press OK.  
2. Find the channel:  
If you know the channel frequency,  
enter it with the Navigation buttons or  
Numeric buttons.  
If you do not know the channel  
frequency, search for the next  
frequency that has a strong signal:  
Select [Search], then press OK.  
6. Select an option, then press OK.  
[Store current channel]: Store the  
channel as the current channel number.  
[Store as new channel]: Store the  
channel as a new channel number.  
3. After you have found the correct channel,  
select [Done], then press OK.  
4. Select [Store as new channel], then press  
OK to store the new TV channel.  
Note: If the reception is poor, reposition  
your antenna and repeat the procedure.  
EN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Update channel list  
Copy channels  
ATTENTION: This feature is intended for  
dealers and service personnel.  
When the TV was switched on for the first  
time, a full installation of channels was  
performed.  
By default, when there are changes to these  
channel lists, the TV updates them  
automatically. You can also switch off the  
automatic update or manually update the  
channels.  
You can copy channel lists from one Philips  
TV to another through a USB storage  
device. You do not need to search for  
channels or install them again on the second  
TV. The channel list file is small enough to fit  
on any USB storage device.  
Note: If you are prompted to enter a code,  
enter '8888'.  
Automatic update  
To add or remove digital channels  
automatically, leave the TV in standby mode.  
The TV updates channels and stores new  
channels everyday. Empty channels are  
What you need  
Two Philips TVs that have these properties:  
The same country setting  
The same year range  
The same DVB type, as indicated by  
the suffix (H, K, T, or D/00) in the  
model name  
removed from the channel list.  
\
The same settings for satellite channels,  
including the number of LNB satellites  
The same hardware type, as indicated  
by the sticker on the back of the TV  
(for example Qxxx.xx.Lx)  
Switch off the channel update message  
If a channel update is performed, a message  
is displayed at startup. You can switch off this  
message.  
1. Press  
.
Compatible software versions  
2. Select [Setup] > [Channel settings] or  
[Satellite settings].  
If the channel list cannot be copied to the  
second TV, a message is displayed.  
3. Select [Channel installation] > [Channel  
update message].  
4. Select [Off], then press OK.  
Note: If you are prompted to enter a code,  
enter '8888'.  
Step 1: Check the country setting  
1. Switch on the first TV (with the channels  
that you want to copy to the second TV).  
Switch off automatic updates  
In the [Channel installation] menu, select  
[Automatic channel update] > [Off].  
2. Press  
.
Update channels manually  
1. Press  
2. Select [Setup] > [Search for channels] >  
[Update channels], then press OK.  
3. Follow the onscreen instructions to  
update the channels.  
3. Select [Setup] > [Search for channels] >  
[Reinstall channels], then press OK.  
The country menu is displayed.  
.
4. Make a note of the current setting.  
5. Press  
6. Press [Cancel] to exit.  
.
Step 2: Copy channel list to USB  
1. Connect a USB storage device to the first  
TV (with the channels installed on it).  
2. Press  
.
3. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to USB], then press OK.  
The channel list is copied to the USB storage  
device.  
4. Disconnect the USB storage device.  
EN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3: If the second TV has no channels  
installed  
Satellite settings  
1. Switch on the second TV (on which you  
want to copy the channel list).  
Initial installation starts.  
2. Follow the onscreen instructions and  
select the same country as the TV whose  
channel list you want to copy.  
3. Skip the search for channels.  
4. Connect the USB storage device.  
What you can do  
View satellite channels  
Note: Available on certain models only.  
[Search for satellite] is only available if the  
TV supports DVB-S.  
To receive satellite channels, connect the  
SAT connector on your TV to a satellite dish  
antenna.  
5. Press  
.
6. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to TV], then press OK.  
The channel list is copied to the TV storage  
device.  
LNBs  
This TV can receive signals from 4 different  
low noise block-down converters (LNBs).  
An LNB is mounted at the end pole of the  
dish antenna and captures signals from a  
satellite.  
7. Disconnect the USB storage device.  
Step 3: If the second TV has no channels  
installed  
1. Switch on the second TV (on which you  
want to copy the channel list).  
Install satellite channels  
1. While you watch TV, press  
2. Select [Setup] > [Search for satellite] >  
[Reinstall channels].  
.
2. Press  
.
3. Select [Setup] > [Search for channels] >  
[Reinstall channels], then press OK.  
The country menu is displayed.  
3. Follow the onscreen instructions to  
complete the installation.  
4. Once complete, select [Finish], then press  
OK.  
4. Make sure that the country setting is the  
same as for the first TV.  
5. Press  
.
Select connection type  
6. Press [Cancel] to exit.  
While you install satellite channels, you need  
to set the connection type. The connection  
type determines the number of LNBs on  
your dish antenna and the number of  
satellite channels you can install.  
1. After you select [Reinstall channels],  
select [Settings] and then press OK.  
2. Select [Connection type].  
7. If the country setting is different, reinstall  
the second TV to match the country setting  
of the first TV. See Set up your TV >  
Restore default settings (Page 44).  
8. Connect the USB storage device to the  
second TV.  
9. Press  
.
10. Select [Setup] > [TV settings] >  
[Preferences] > [Channel list copy] >  
[Copy to TV], then press OK.  
3. Select a setting, then press OK.  
[One LNB]: Select if you have only one  
LNB.  
[DiSeqC Mini (2 LNBs)]: Select if you  
have 2 LNBs.  
[DiSeqC 1.0 (3-4 LNBs)]: Select for 3  
or 4 LNBs.  
The channel list is copied to the second TV.  
11. Disconnect the USB storage device.  
EN  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Test signal strength  
Remove a satellite  
1. Press > [Setup] > [Search for  
satellite].  
2. Select [Remove satellite], then press OK.  
3. Select the satellite you want to remove  
and press OK.  
If a channel or transponder is skipped during  
installation, you can test the signal strength of  
a satellite or add a new channel.  
1. While you watch TV, press  
.
2. Select [Setup] > [Search for satellite] >  
[Manual installation], then press OK.  
3. Select the LNB.  
The satellite and its channels are removed  
from the installation.  
4. If you know the frequency of the  
transponder (which can include several  
channels), select [Frequency] and enter it.  
5. Select [Search], then press OK.  
Language settings  
6. If a new frequency is found, press  
[Store]to add the new transponder with its  
channels.  
Menu language  
1. While you watch TV, press  
2. Select [Setup] > [TV settings] >  
[Preferences] > [Menu language].  
3. Select a menu language from the list, then  
press OK.  
.
Update satellite channels  
1. While you watch TV, press  
.
2. Select [Setup] > [Search for satellite] >  
[Update channels].  
3. Follow the onscreen instructions to  
complete the installation.  
4. Once complete, select [Finish], then press  
OK.  
Audio language  
If the TV channel broadcasts multiple audio  
languages, you can select the preferred audio  
language.  
Add and remove satellites  
You can add or remove satellites at any  
time, and install channels from new satellites.  
Note: Before you add satellites, make sure  
that the connection type is correct. See Set  
up your TV > Satellite Settings > Install  
satellite channels (Page Error! Bookmark not  
defined.).  
1. While you watch TV, press OPTIONS.  
2. Select an option, then press OK.  
[Audio language]: Select the audio  
language for digital channels.  
[Dual I-II]: Select the audio language for  
analogue channels.  
Audio languages for digital channels  
For digital channels with multiple audio  
languages, you can select the default audio  
language that is broadcast.  
1. Press > [Setup] > [Search for  
satellite], and press OK.  
1. Press  
.
2. Select [Add satellite], then press OK.  
The TV searches for a satellite on the first  
free LNB. This can take several minutes. If no  
satellite is found, check the antenna  
connections and the position of the dish  
antenna.  
3. If no satellite is found, select [Search] to  
scan again or [Next LNB] to skip to the  
next LNB.  
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Languages].  
3. Select a setting, then press OK.  
[Primary audio]: If this language is  
broadcast, it is selected by default.  
[Secondary audio]: If the primary audio  
language is not broadcast, select this  
language.  
If there are no free LNBs available,  
remove a satellite first.  
If you are satisfied with the added  
satellite, install the channels.  
4. To install all channels, select [Install]. The  
installation can take several minutes.  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Subtitles on analogue channels  
Hearing impaired access  
Tip: To make sure that a hearing impaired  
1. While you watch an analogue TV channel,  
press TEXT.  
audio language is available, press  
OPTIONS, then select [Audio language].  
Languages with an ear icon support hearing  
impaired audio.  
To switch on hearing impaired audio and  
subtitles  
1. While you watch TV, press OPTIONS.  
2. Select [Universal access] > [Hearing  
impaired].  
2. Enter the three-digit page number of the  
subtitles page (usually '888').  
If available, subtitles are switched on.  
3. Press to exit text.  
Subtitles on digital channels  
1. While you watch a digital TV channel,  
press OPTIONS.  
3. Press a button to select an option:  
2. Select [Subtitles], then press OK.  
3. Select [Subtitles off], [Subtitles on] or  
[On during mute], then press OK.  
If you select [On during mute], subtitles are  
displayed only when you press to mute the  
sound.  
Red button - [Off]: Switch off hearing-  
impaired features.  
Green button - [On]: Switch on  
hearing-impaired audio and subtitles.  
4. Press to exit.  
Note: If an MHEG application is activated,  
Visually impaired access  
subtitles are not displayed.  
Tip: To make sure that a visually impaired  
audio language is available, press  
OPTIONS, then select [Audio language].  
Languages with an eye icon support visually  
impaired audio.  
Subtitle language  
For certain digital channels, you can change  
the subtitle language.  
1. While you watch TV, press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Subtitle language].  
3. Select [Primary subtitles] or [Secondary  
subtitles] for the preferred language.  
4. Press OK to confirm.  
To switch on visually impaired audio  
1. While you watch TV, press OPTIONS.  
2. Select [Universal access].  
3. Press the Green button to select [Visually  
impaired].  
Tip: Press OPTIONS > [Subtitle  
language] to change the subtitle language for  
a specific channel.  
4. Press a button to select an option:  
Red button - [Off]: Switch off visually  
impaired audio.  
Green button - [On]: Switch on visually  
impaired audio.  
Universal access settings  
5. Press to exit.  
Note: If the EasyLink remote control is  
switched on, you cannot select the Green  
button. To switch off EasyLink, see Use  
more of your TV > Use EasyLink > What  
you need (Page 33).  
Switch on  
Some digital TV broadcasters provide special  
audio and subtitle features for people who  
are hearing or visually impaired. You can  
switch these features on or off.  
Select audio from speakers or headphones  
You can choose to hear the visually impaired  
audio through the TV speakers, headphones  
or both.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences].  
1. Press  
.
3. Select [Universal access] > [On] or [Off],  
then press OK.  
2. Select [Setup] > [Channel settings] >  
[Languages] > [Visually impaired] >  
[Speakers/Headphones].  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Select a setting, then press OK.  
Other settings  
[Speakers]: Hear visually impaired  
audio from speakers only.  
[Headphones]: Hear visually impaired  
audio from headphones only.  
[Speakers + headphones]: Hear visually  
impaired audio from speakers as well as  
headphones.  
TV demo  
You can start a demo to find out more  
about the features on this TV.  
Note: Demos are not supported on MHEG  
channels.  
Change volume for visually impaired audio  
1. In the [Universal access] menu, press the  
Yellow button to select [Mixed volume].  
2. Press the Navigation buttons to change  
the volume, then press OK.  
1. While you watch TV, press  
2. Select [Setup] > [Watch demos], then  
press OK.  
3. Select a demo, then press OK.  
4. Press to exit.  
.
3. Press to exit.  
Audio feedback for the visually impaired  
When you press a button on the remote  
control or TV, you can set the TV to play a  
beep.  
Location  
To make sure that the correct TV settings  
are applied, you can select where the TV is  
used.  
1. In the [Universal access] menu, press the  
Blue button to select [Key beep].  
2. Press the Green button to turn on audio  
feedback or press the Red button to turn it  
off.  
Shop or home mode  
Select [Home] mode to access all TV  
settings. In [Shop] mode, you can access only  
limited settings.  
3. Press to exit.  
1. While you watch TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences].  
3. Select [Location] > [Home] or [Shop],  
then press OK.  
Enable audio effects  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Languages] > [Visually impaired] > [Audio  
effects].  
4. Restart the TV.  
3. Select a setting, then press OK.  
Placement  
[On]: Enable audio effects in the visually  
impaired audio.  
Before you position the TV, read all  
safety precautions. See Get Started >  
Important > Safety (Page 6).  
[Off]: Disable audio effects in the  
visually impaired audio.  
Position the TV where light does not  
shine directly on the screen.  
Choose type of speech  
1. Press  
.
The ideal viewing distance of this TV is  
three times its diagonal screen size. For  
example, if the diagonal screen size of  
the TV is 81 cm / 32", the ideal viewing  
distance is ~2.5 m / ~92" from the  
front of the screen.  
2. Select [Setup] > [Channel settings] >  
[Languages] > [Visually impaired] >  
[Speech].  
3. Select a setting, then press OK.  
[Descriptive]: Hear descriptive speech  
in the visually impaired audio.  
[Subtitles]: Hear subtitles in the visually  
impaired audio.  
While seated, your eyes should be level  
with the centre of the screen.  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Stand mount or wall mount  
You can apply the best settings for your TV  
by selecting wall mount or stand mount.  
Note: The update assistant directs you to  
the Philips support website. See the  
installation instructions on the website to  
complete the update.  
1. In the [Preferences] menu, select [TV  
placement].  
2. Select [On a TV stand] or [Wall  
mounted], then press OK.  
Update from digital broadcast  
When available, the TV can receive software  
updates through digital broadcasts. When a  
software update is received, you are  
prompted to update the software. We  
strongly recommend that you update the  
software when prompted.  
Update software  
Check version  
Follow the onscreen instructions.  
1. Press  
.
Note: To update the software later, select  
> [Setup] > [Software settings] > [Local  
updates].  
2. Select [Setup] > [Software settings] >  
[Current software info], then press OK.  
The version of the current software is  
displayed.  
From the Internet  
Caution: Do not install a lower version of  
software than the current version installed  
on your product. TP Vision cannot be held  
liable or be made responsible for problems  
caused by a software downgrade.  
You can update the TV software directly  
from the Internet by connecting the TV to  
the Internet. See Connect your TV >  
Network and the Internet (Page 55).  
1. Press > [Setup] > [Update software],  
then press OK.  
2. Select [Internet], then press OK.  
3. Follow the onscreen instructions to start  
the update.  
Update the software through one of these  
methods:  
update with USB storage device  
update from digital broadcast  
update from the Internet  
When the update is complete, the TV  
switches to standby and on again  
automatically. Wait for the TV to switch  
back on. Do not switch the TV on yourself.  
Update with USB  
Before you update the software, make sure  
that you have:  
Note: If the TV is connected to the Internet,  
the TV displays the availability of new  
software at startup.  
A USB storage device that has at least  
256 megabytes of storage space, is FAT  
or DOS formatted and has its write  
protection disabled.  
Restore default settings  
Access to a computer with a USB  
connector and Internet access.  
You can reset all picture and sound settings  
and reinstall all TV channels on your TV.  
Note: Do not use a USB hard drive.  
1. Press  
.
1. Press  
.
2. Select [Setup] > [Update software], then  
press OK.  
2. Select [Setup] > [TV settings] >  
[Reinstall TV], then press OK.  
3. Select [USB], then press OK.  
4. Follow the onscreen instructions to start  
the update.  
3. Follow the onscreen instructions.  
EN  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5 Connect your  
TV  
About cables  
Cable quality  
Overview  
Before you connect devices to the TV, check  
the available connectors on the device.  
Connect the device to the TV with the  
highest quality connection available. Good  
quality connectors transfer picture and  
sound better.  
The connections shown in this user manual  
are recommendations only. Other solutions  
are possible.  
Tip: If your device has only composite or  
RCA connectors, use a composite (CVBS)  
cable to connect the device to the Y Pb Pr  
connector on the TV.  
Y Pb Pr  
Component video (Y Pb Pr) only transmits  
video. Use the supplied Y Pb Pr adapter  
cable to connect devices. For sound, use an  
audio cable (not supplied) to connect to  
AUDIO IN.  
Tip: We recommend that you use a right-  
angled audio cable.  
HDMI  
The Y Pb Pr connection can handle high-  
definition (HD) TV signals.  
An HDMI connection has the best picture  
and sound quality.  
An HDMI cable combines video and  
audio signals. Connect HDMI for high-  
definition (HD) TV signals and to switch  
on EasyLink.  
An HDMI Audio Return Channel  
(ARC) connector allows output of TV  
audio to an HDMI ARC compliant  
device.  
Connect HDMI cables shorter than 5  
meters/16.4 feet.  
EN  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SCART  
VGA  
A SCART connection combines video and  
audio signals. Use the supplied SCART  
adapter cable to connect devices.  
You can connect VGA to display PC content  
on the TV.  
VGA only transmits video. For sound, also  
connect to AUDIO IN.  
SCART connectors can handle RGB video  
signals but cannot handle high-definition  
(HD) TV signals.  
Connect devices  
Blu-ray or DVD disc player  
Connect the disc player to the TV with an HDMI cable.  
EN  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
TV receiver  
Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on  
certain models only.)  
Connect the satellite or digital TV receiver to the TV with an HDMI cable.  
EN  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the supplied adapter cable with a SCART cable to connect the satellite or digital TV receiver to  
the TV.  
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
Video recorder  
Connect the recorder to the TV with an antenna cable. (SAT is available on certain models only.)  
EN  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the supplied adapter cable with a SCART cable to connect the recorder to the TV.  
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
Game console  
Connect the game console to the TV with an HDMI cable.  
EN  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
Home theatre  
Connect the home theatre to the TV with an HDMI cable and an optical cable.  
Use the supplied adapter cable with a SCART cable to connect the home theatre to the TV.  
EN  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
Digital camera  
Connect the digital camera to the TV with a USB cable.  
Digital camcorder  
Connect the digital camcorder to the TV with an HDMI cable.  
EN  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to  
connect the disc player to the TV.  
Connect more devices  
USB hard drive  
Connect the USB hard drive to the TV with a USB cable.  
Computer  
Connect the computer to the TV with an HDMI cable.  
EN  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect the computer to the TV with a DVI-HDMI cable and an audio cable.  
Connect the computer to the TV with a VGA cable and an audio cable.  
Note:  
Keyboard and mouse  
USB keyboard  
If you need extra USB connectors, use  
a USB hub. You can also connect the  
USB mouse to a connected USB  
keyboard.  
You can also connect the USB mouse  
to a connected USB keyboard.  
You can connect a USB keyboard to enter  
text such as device names on the TV or text  
for Smart TV apps.  
USB mouse  
You can connect a USB mouse to navigate  
pages on the Internet and click on links  
easily.  
EN  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the keyboard and mouse to the TV with a USB cable.  
When the TV detects the keyboard, you can  
select the keyboard layout and test your  
selection. If you have selected a Cyrillic or  
Greek keyboard layout first, you can also  
select a secondary Latin keyboard layout.  
When the TV detects the mouse, set the  
tracking speed. Navigate into the test area to  
check the speed.  
Use the USB mouse with your TV  
Left mouse button (left-click):OK  
Right mouse button (right-click):  
(Back)  
To change the keyboard layout, press  
>
[Setup] > [TV settings] > [Preferences] >  
[USB mouse/keyboard] > [Keyboard  
settings] and press OK.  
Scroll wheel: to scroll up and down an  
Internet page.  
TV keys on your keyboard  
To make a text entry, use the following keys:  
Note:  
The USB mouse cannot navigate in Smart  
TV apps or the TV menus.  
Enter : confirm an entry  
Backspace : delete a character  
before the cursor  
Watch a connected device  
Navigation keys: navigate within a text  
field  
Alt + Shift: switch between keyboard  
layouts if multiple keyboard layouts are  
set  
Add new device  
You can watch a connected device in one of  
the following ways:  
Smart TV keys on your keyboard  
Add its icon to the Home menu for  
easy access.  
Enter : confirm an entry  
Backspace : return to the previous  
page  
Select from the Source menu.  
Note: If you connect an HDMI-CEC  
compliant device to the TV through the  
HDMI connector and switch it on, the  
device is automatically added to the Home  
menu.  
Navigation keys: navigate to the next  
field  
Tab: Next  
Tab and Shift: Previous  
Home: scroll to the top of the page  
End: scroll to the bottom of the page  
Page Up: jump up one page  
Page Down: jump down one page  
+/- : zoom in or out one step  
* : fit to width  
EN  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Add new device  
1. Connect and switch on the device.  
Remove device  
If the device is no longer connected to the  
TV, you can remove it from the Home  
menu.  
2. Press  
.
3. Select [Add your devices], then press  
OK.  
1. Press  
.
4. Follow the onscreen instructions.  
If you are prompted to select the TV  
connection, select the connector that this  
device uses.  
2. Select the device icon from the Home  
menu.  
3. Press OPTIONS.  
4. Select [Remove this device], then press  
OK.  
Rename device  
The selected device is removed from the  
Home menu.  
After you have added a new device to the  
Home menu, you can rename it.  
1. Press  
.
2. Select the device icon from the Home  
menu.  
Network and the Internet  
3. Press OPTIONS.  
What you can do  
4. Select [Rename], then press OK.  
A text input box appears.  
5. Press the Numeric buttons and the  
Navigation buttons to select and enter the  
View Media  
If you connect the TV to a home network,  
you can play photos, music and videos from  
your computer. See Use your TV > View  
Media (Page 19).  
name.  
6. When complete, select [Done], then  
press OK.  
Smart TV  
If you connect the TV to a home network  
with an Internet connection, you can browse  
Smart TV. Smart TV offers Internet services  
and websites tailored to your TV. Play music  
and videos, consult infotainment, rent movies  
and much more. See Use your TV >  
Select a source  
From Home menu  
After you have added the new device to the  
Home menu, you can select the new device  
icon to view its contents.  
Browse Smart TV (Page 20).  
1. Press  
.
2. Select the device icon from the Home  
menu.  
Interactive TV  
If you connect the TV to the Internet, you  
can enjoy the full benefits of Interactive TV.  
Systems such as HbbTV, MHP and DTVi, use  
the Internet to communicate with the TV.  
The availability of these systems depends on  
your local broadcaster.  
3. Press OK to confirm.  
From Source menu  
You can also press  
SOURCE to display a  
list of connector names. Select the  
connector that connects the device to the  
TV.  
1. Press  
SOURCE.  
2. Press the Navigation buttons to select a  
connector in the list.  
3. Press OK to confirm.  
EN  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
What you need  
Wired connection  
Warning: This TV complies with the EMC  
directive only when you use a shielded  
Cat5 Ethernet cable.  
1. Switch on the router and switch on its  
DHCP setting.  
2. Connect the router with an Ethernet  
cable to the TV.  
3. Press , then select [Setup].  
4. Select [Connect to network], then press  
OK.  
5. Follow the onscreen instructions to install  
the network.  
6. Wait for the TV to find the network  
connection.  
7. If prompted, agree to the End User  
Licence Agreement.  
An ethernet cable  
A computer network that includes:  
a) A universal plug-and-play (UPnP)  
router and  
b) A computer with one of the  
following operating systems: Microsoft  
Windows XP, Microsoft Windows  
Vista, Mac OS X or Linux.  
To connect your TV to computers, you  
also need media server software that is  
set to share files with your TV. See Use  
your TV > View media (Page 19).  
To connect your TV to the Internet,  
you also need a high-speed connection  
to the Internet.  
WiFi integrated  
This section is only applicable for WiFi-  
integrated TVs.  
You can connect your TV to your home  
network wirelessly. You can enjoy the best  
of the Internet with Smart TV services, and  
share content between your connected  
devices with SimplyShare.  
Connect  
Note:  
The wireless network operates in the same  
2.4 GHz frequency spectrum as common  
household devices, such as Dect phones,  
microwave ovens or Bluetooth devices,  
which can cause WiFi interference. Move  
these devices away from the TV.  
You can connect this TV to your home  
network through a wired or wireless  
connection.  
To reduce network traffic, switch off  
unused network equipment in the  
home network.  
Reception quality depends on the  
location of the wireless router and your  
local Internet service provider.  
When playing video over your wireless  
home network, we recommend that  
you use an IEEE 802.11 N router. The  
connection speed may differ according  
to the operating environment of your  
wireless home network.  
For a wired connection, see Connect  
your TV > Network and the Internet  
> Wired connection (Page 56).  
Start wireless setup  
1. Switch on your wireless network router.  
2. Press on the TV remote control.  
3. Select [Setup] > [Connect to network],  
and then press OK.  
For a wireless connection, see Connect  
your TV > Network and the Internet  
> WiFi Integrated (Page 56).  
4. Follow the onscreen instructions.  
EN  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
WPS - Wi-Fi Protected Setup  
Set secured connection with WPA  
encryption  
If your router has WPA (WiFi Protected  
Access) security, enter the pass phrase with  
the remote control.  
1. To enter the encryption key manually,  
select [Standard] and press OK.  
2. To access the onscreen keyboard, select  
the text entry field, then press OK.  
1. If your router supports WPS (WiFi  
Protected Setup), press the WPS button on  
the router.  
2. After 2 minutes, select [WPS] on the TV,  
then press OK.  
The TV connects to your network. This  
takes about 2 minutes.  
Most new wireless routers have the WPS  
system and carry the WPS logo. The WPS  
system uses WPS security encryption and  
cannot be combined with devices on your  
network that use the WEP (Wired  
Set secured connection with WEP  
encryption  
If your router has WEP security, the TV asks  
for the WEP encryption key in hexadecimal  
numbers.  
Equivalent Privacy) security encryption.  
1. Locate the hexadecimal key in the router  
software on your PC and make a note of of  
the first key in the WEP keys list.  
If you still need the WEP devices in your  
network, install with [Scan] > [Custom].  
Scan for routers  
If you have several routers in your network,  
you can select the network you need.  
1. To select a specific network router, press  
[Scan] on the first page of the installation.  
2. Enter the security key on the TV with the  
remote control to connect to the router.  
3. If prompted, agree to the End User  
Licence Agreement.  
The routers with WPS and the strongest  
signal are shown first in the list on screen.  
TV network name  
2. Select the router you need, then press  
If you have more than one TV in your home  
network, you can rename this TV to give it a  
unique name.  
OK.  
If you are connecting to a WPS router,  
select [WPS] on the TV.  
1. Press > [Setup] > [Network settings],  
and select [TV network name].  
2. To enter the name, press OK to open the  
onscreen keyboard or use the remote  
control keypad.  
If you want to set the PIN code in your  
router software to connect, select  
[WPS pin] and note down the code.  
To enter the encryption key manually,  
select [Standard] and enter the key  
when prompted.  
Set secured connection with WPS  
encryption  
1. To set the secured connection with a PIN  
code, select the [WPS pin] and press OK.  
2. Write down the 8-digit PIN code shown  
on TV and enter it in the router software on  
your PC.  
See the router manual for where to enter  
the PIN code.  
EN  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watch CAM services  
1. After inserting and activating the CAM,  
press OPTIONS.  
2. Select [Common interface], then press  
OK.  
3. Select the CAM provider, then press OK.  
Common interface  
What you can do  
You can watch scrambled digital TV channels  
with a Conditional Access Module (CAM).  
After the CAM is inserted and subscription  
fees are paid, you can watch the programme.  
This TV supports CI as well as CI+. CI+  
supports premium HD digital programmes  
with a high level of copy protection.  
Note: The applications, functions, content  
and onscreen messages depend on the CAM  
service provider.  
What you need  
Caution: To protect the CAM from damage,  
insert the CAM as instructed.  
Note: Refer to the documentation from  
your service operator on how to insert a  
smart card into the Conditional Access  
Module.  
1. Switch off the TV.  
2. Follow the directions printed on the CAM  
to insert the CAM into the Common  
Interface slot at the side of the TV.  
Push the CAM in as far as it will go.  
3. Switch on the TV, then wait for the CAM  
to be activated. This takes a few minutes.  
To maintain access to encrypted digital TV  
channels, leave the CAM in the slot.  
EN  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The TV or Smart TV menu is in the wrong  
language:  
Change the menu to your preferred  
language. See Set up your TV > Language  
settings > Menu language (Page 41).  
6 Troubleshooting  
General issues  
You want to upgrade your TV software:  
The TV does not switch on:  
Disconnect the power cable from the  
power outlet. Wait for one minute  
then reconnect it.  
Make sure that the power cable is  
securely connected.  
download the latest software package for  
your TV. Software installation instructions  
and release notes indicating what's been  
updated are also available at the site. Full  
instructions on how to upgrade your TV  
software are also available at Set up your TV  
> Update software.  
The TV does not respond to remote  
control or front controls when switched  
on:  
The TV requires some time to start up.  
During this time, the TV does not respond  
to the remote control or front controls. This  
is normal behaviour.  
Channel issues  
You want to install TV channels:  
See Set up your TV > Channel settings  
(Page 37) for instructions on installing  
analogue or digital channels. If you want to  
install satellite TV channels, see Set up your  
TV > Satellite settings (Page 40).  
When you are turning the TV on, off or to  
standby, you hear a creaking sound from  
the TV chassis:  
No action is required. The creaking sound is  
due to the normal expansion and  
contraction of the TV as it cools and warms  
up. This does not affect performance.  
When the TV is in standby, a startup splash  
screen is displayed, then returns to standby  
mode:  
No digital channels were found during the  
installation:  
Make sure that the TV supports DVB-T,  
DVB-C or DVB-S in your country.  
Make sure that all cables are properly  
connected and that the correct  
network is selected.  
This is normal behaviour. When the TV is  
disconnected and reconnected to the power  
supply, the startup screen is displayed at the  
next startup.  
Previously installed channels do not appear  
in the channel list:  
Make sure that the correct channel list is  
selected.  
You want to rearrange or reorder the  
channel list:  
After channels have been installed, they  
appear in the channel list. For information  
about managing channel lists, including  
rearranging channels, see Watch TV >  
Manage channel lists.  
To switch on the TV from standby, press  
on the remote control or press any key on  
the TV.  
The standby light on the TV blinks red:  
Disconnect the power cable from the power  
outlet. Wait until the TV cools down before  
you reconnect the power cable. If the  
blinking reoccurs, contact Philips Consumer  
Care.  
You forgot the 4-digit code to unlock the  
channel blocking feature (child lock):  
Enter ‘8888’.  
EN  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
The picture from broadcasts is scrambled:  
You may need a Conditional Access Module  
to access content. Check with your service  
operator.  
Picture issues  
The TV is on, but there is no picture or the  
picture is distorted:  
An "e-sticker" banner displaying  
Make sure that the antenna is properly  
connected to the TV.  
Make sure that the correct device is  
selected as the display source.  
Make sure that the external device or  
source is properly connected.  
information appears on the TV display:  
The TV is in [Shop] mode. To remove the  
e-sticker, set the TV to [Home] mode, then  
restart the TV. See Set up your TV > Other  
settings > Location (Page 43).  
The computer display on the TV is not  
stable:  
There is sound but no picture:  
Make sure that the picture settings are set  
correctly.  
There is poor TV reception from an  
antenna connection:  
Make sure that your PC uses the  
supported resolution and refresh rate.  
See Product specifications > Display  
resolutions (Page 63).  
Make sure that the antenna is properly  
connected to the TV.  
Change the TV picture format to  
[Unscaled].  
Loud speakers, unearthed audio  
devices, neon lights, high buildings and  
other large objects can influence  
reception quality. If possible, try to  
improve the reception quality by  
changing the antenna direction or  
moving devices away from the TV.  
If reception on only one channel is  
poor, fine-tune this channel.  
There is poor picture quality from  
connected devices:  
Make sure that the devices are  
connected properly.  
Make sure that the picture settings are  
set correctly.  
The TV did not save your picture settings:  
Make sure that the TV location is set to  
[Home]. You can change and save settings in  
this mode.  
The picture does not fit the screen; it is  
too big or too small:  
Try a different picture format.  
The picture format keeps changing with  
different channels:  
Try applying specific picture format instead  
of [Auto zoom].  
The picture position is incorrect:  
Picture signals from some devices may not fit  
the screen correctly. Check the signal output  
of the device.  
EN  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sound issues  
Connection issues  
There is a picture but sound quality is  
poor:  
If no audio signal is detected, the TV  
automatically switches the audio output off  
this does not indicate malfunction.  
There are problems with HDMI devices:  
Note that HDCP (High-bandwidth  
Digital Content Protection) support can  
delay the time taken for a TV to display  
content from an HDMI device.  
If the TV does not recognise the HDMI  
device and no picture is displayed,  
switch the source from one device to  
another and back again.  
If there are intermittent sound  
disruptions, make sure that output  
settings from the HDMI device are  
correct.  
If you use an HDMI-to-DVI adapter or  
HDMI-to-DVI cable, make sure that an  
additional audio cable is connected to  
AUDIO IN - Y/Pb/Pr or AUDIO IN -  
DVI/VGA (mini-jack only).  
Make sure that all cables are properly  
connected.  
Make sure that the volume is not  
muted or set to zero.  
Make sure that the TV speaker setting  
is selected. Press ADJUST, select  
[Speakers], then select [TV].  
Make sure that the TV audio output is  
connected to the audio input on the  
HDMI-CEC enabled or EasyLink  
compliant home theatre device. Sound  
should be heard from the home theatre  
speakers.  
Some devices may require you to  
manually enable HDMI audio output. If  
HDMI audio is already enabled but you  
still cannot hear audio, try changing the  
digital audio format of the device to  
PCM ('Pulse Code Modulation'). Refer  
to the documentation accompanying  
your device for instructions.  
You cannot use EasyLink features:  
Make sure that your HDMI devices are  
HDMI-CEC compatible. EasyLink features  
only work with devices that are HDMI-CEC  
compatible.  
If an HDMI-CEC compliant audio device is  
connected to the TV and the TV does not  
display any mute or volume icon when the  
volume is muted, increased or decreased:  
When a HDMI-CEC audio device is  
There is a picture but the sound quality is  
poor:  
Make sure that the sound settings are  
correctly set.  
There is a picture but sound comes from  
one speaker only:  
Make sure that sound balance is set to the  
centre.  
connected this behaviour is normal.  
USB device content is not displayed:  
Make sure that the USB storage device  
is set to Mass Storage Class compliant,  
as described in the storage device's  
documentation.  
Make sure that the USB storage device  
is compatible with the TV.  
Make sure that the audio and picture  
file formats are supported by the TV.  
Audio and picture files on your USB  
storage device do not play or display  
smoothly:  
The transfer performance of the USB  
storage device may limit the data transfer  
rate to the TV which causes poor playback.  
EN  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Network issues  
Contact Philips  
You want to establish a wireless  
connection between your TV and home  
network:  
Refer to Connect your TV > Network and  
the Internet > WiFi integrated (Page 56)  
for instructions on how to connect your TV  
to your home network wirelessly.  
Warning: Do not attempt to repair the TV  
yourself. This may cause severe injury,  
irreparable damage to your TV or void  
your warranty.  
If are not able to resolve your problem, refer  
to the frequently asked questions (FAQs) for  
this TV at www.philips.com/support. You  
can also consult and contribute to the Philips  
TV community at  
Smart TV does not work:  
Check that the router is properly connected  
to the TV and that your router has open  
access to the Internet. If your router has a  
firewall or security settings, make sure that it  
allows Smart TV data to pass through -  
check your router documentation for details.  
If you wish to speak to or email a Philips  
representative, contact the Philips Consumer  
Care in your country. You can find the  
contact details in the leaflet accompanying  
Open Internet access via Smart TV is slow:  
Try to improve the signal quality  
between the router and TV if you are  
accessing the Internet with a wireless  
connection. See the router's  
documentation for details.  
Note your TV model and serial number  
before you contact Philips. These numbers  
are printed on the back of the TV and on  
the packaging.  
Always use a fast broadband  
connection wherever possible.  
Update your TV with the latest  
software to ensure that browsing speed  
is optimal.  
Your Network is slow:  
If you are accessing your PC with a wireless  
connection, see the router's documentation  
to improve the signal quality between the  
router and TV.  
Wireless network is distorted or not  
found:  
Make sure that the wireless network is  
not disturbed by microwave ovens,  
DECT phones or other neighbouring  
Wi-Fi devices.  
If the wireless network is not working,  
try a wired network connection.  
Make sure that the firewalls in your  
network allow access to the TV  
wireless connection.  
EN  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture enhancement: Pixel Plus HD /  
Pixel Precise HD*  
Perfect Motion Rate (PMR): 400 Hz  
HD Natural Motion  
7 Product  
specifications  
3D: 3D Max*  
Power and reception  
* For certain models only.  
Sound  
Output power (RMS):  
PFL5x07 series:  
Product specifications are subject to change  
without notice.  
Power  
- For 32, 40, 46 inch models: 20 W @  
10% THD  
- For 55 inch models: 30 W @ 30%  
THD  
Mains power: AC 220-240 V~, 50-60  
Hz  
Standby power consumption: < 0.15 W  
Ambient temperature: 5 to 40 degree  
Celsius  
PFL5xx7 series:  
- For 40, 46, 55 inch models: 28 W @  
30% THD  
Incredible Surround  
Clear Sound  
Dynamic Bass Enhancement  
Mono / Stereo / NICAM  
For power consumption, see the  
product specifications at  
The power rating stated on the product  
typeplate is the power consumption for this  
product during normal household use (IEC  
62087 Ed.2). The maximum power rating,  
stated between brackets, is used for  
electrical safety (IEC 60065 Ed. 7.2).  
Reception  
Display resolutions  
Computer formats - HDMI  
(Resolution - refresh rate)  
Antenna input: 75 ohm coaxial (IEC75)  
TV system: DVB COFDM 2K/8 K,  
Video playback: NTSC, PAL, SECAM  
Digital TV: MPEG-4, DVB-T  
(Terrestrial), DVB-T2*, DVB-C (Cable),  
DVB-S/S2* (Satellite).  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Tuner bands: VHF, UHF, S-Channel,  
Hyperband  
Computer formats - VGA  
(Resolution - refresh rate)  
* Available on certain models only.  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Display and sound  
Picture/Display  
Display type: LED backlight, Full HD  
Diagonal size:  
- 81 cm / 32 inch  
- 102 cm / 40 inch  
- 117 cm / 46 inch  
- 140 cm / 55 inch  
Aspect ratio: 16:9 (widescreen)  
Panel resolution: 1920 X 1080 p  
EN  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Video formats  
(Resolution - refresh rate)  
Multimedia  
480i - 60 Hz  
480p - 60 Hz  
576i - 50 Hz  
576p - 50 Hz  
720p - 50Hz, 60 Hz  
1080i - 50Hz, 60 Hz  
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz  
Supported multimedia connections  
USB: NTFS, FAT 16, FAT 32.  
Connect only USB devices which  
consume 500 mA of power or less.  
Ethernet LAN RJ-45  
Supported image files  
JPEG (*.jpg)  
Supported audio/video files  
Multimedia file names must not exceed 128 characters.  
Supported audio/video files  
Multimedia file names must not exceed 128 characters.  
EN  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Supported audio/video files  
Multimedia file names must not exceed 128 characters.  
Supported subtitle formats  
Multimedia file names must not exceed 128 characters.  
Supported media server software  
CyberLink  
JVC media server  
MediaTomb  
Twonky Media (for Microsoft Windows  
and Mac OS X)  
Windows Media Player (for Microsoft  
Windows)  
Sony Vaio Media Server (for Microsoft  
Windows)  
Buffalo LinkStation Live  
Connectivity  
Rear  
TVersity (for Microsoft Windows)  
Nero MediaHome  
DiXiM (for Microsoft Windows XP)  
Macrovision Network Media Server (for  
Microsoft Windows)  
Ethernet LAN RJ-45  
AUDIO IN (DVI/VGA): stereo 3.5 mm  
mini-jack  
Y/Pb/Pr and AUDIO IN (Y/Pb/Pr):  
Component video and audio L/R mini  
adaptors  
Fuppes (for Linux)  
uShare (for Linux)  
AwoX  
SERV.U: Service port  
VGA: PC input  
EN  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For 32 - 40 inch models  
Top screws: 16 mm  
Bottom screws: 13 mm  
For 46 - 55 inch models  
SCART (RGB/CVBS): SCART mini  
adaptor  
HDMI 1 ARC: HDMI Audio Return  
Channel  
All screws: 16 mm  
HDMI 2/3: HDMI  
TV ANTENNA: 75 ohm coaxial  
SAT: F-pin satellite (available on certain  
models only)  
USB  
Side  
CI: Common Interface  
Headphones: stereo 3.5mm mini-jack  
DIGITAL AUDIO OUT (OPTICAL):  
Optical  
USB  
HDMI SIDE  
Supported TV mounts  
You can mount your TV on the wall with a  
compatible TV mount (sold separately).  
Select the type of TV mount for your TV  
screen size:  
Help version  
81 cm / 32 inches: 200 mm x 200 mm, M6  
102 cm / 40 inches: 200 mm x 200 mm, M6  
117 cm / 46 inches: 400 mm x 400 mm, M6  
140 cm / 55 inches: 400 mm x 400 mm, M6  
UMv 313913705196 - 20120831  
Note: Before mounting the TV on the wall,  
remove the existing VESA screws on the  
back panel.  
Warning: Follow all instructions provided  
with the TV mount. TP Vision Netherlands  
B.V. bears no responsibility for improper  
TV mounting that results in accident, injury  
or damage.  
To prevent damage to cables and  
connectors, leave a gap of at least 5.5 cm /  
2.2 inches from the back of the TV.  
Before you mount the TV on the wall, find  
the correct length of the screw. To find the  
length of the screw, add the thickness of  
your wall mount to the screw length (y), as  
shown in the graphic.  
EN  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
clock - 31  
8 Index  
3
common interface - 58  
computer, play files - 19  
Conditional Access Module - 58  
connect devices - 45  
3D - 17  
3D, 2D to 3D - 18  
3D, change format - 18  
3D, health warning - 7  
3D, switch off - 18  
connect, digital camcorder - 51  
connect, digital camera - 51  
connect, disc player - 46  
connect, external hard disk - 52  
connect, game console - 49  
connect, home network - 56  
connect, home theatre system - 50  
connect, keyboard - 53  
connect, mouse - 53  
A
age rating - 32  
amplifier, select output - 34  
analogue channels, fine-tune - 38  
analogue channels, install - 38  
analogue channels, subtitles - 42  
audio language - 41  
connect, PC - 52  
connect, recorder - 48  
connect, TV receiver - 47  
connect, USB - 19  
audio sync - 34  
C
connected device, add - 54  
connected device, remove - 55  
connected device, rename - 55  
connectors - 45  
CAM, enable - 58  
CAM, insert - 58  
CAM, see Conditional Access Module - 58  
channel list - 14  
contact information, on Internet - 12  
contact Philips - 12  
channel list, copy - 39  
channels - 14  
D
channels, favourites - 14  
channels, fine-tune (analogue) - 38  
channels, install (automatic) - 37  
channels, install (digital) - 38  
channels, install (manual) - 38  
channels, install (satellite) - 40  
channels, reinstall - 44  
channels, rename - 14  
channels, reorder - 14  
channels, switch - 14  
demo - 43  
devices - 46  
devices, add - 54  
devices, watch - 55  
digital camcorder - 51  
digital camera - 51  
digital channels - 38  
digital channels, install - 38  
digital channels, subtitles - 42  
digital radio - 14  
channels, update - 39  
disc player, connect - 46  
child lock - 32  
EN  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
display - 63  
home network - 55  
display resolution - 63  
DTVi - 23  
home theatre system, connect - 50  
I
E
install channels, automatic - 37  
Interactive TV - 23  
EasyLink - 32  
EasyLink, controls - 33  
EasyLink, enable - 33  
K
kensington lock - 8  
EasyLink, features - 32  
EasyLink, onscreen control - 5  
EasyLink, remote control buttons - 33  
EasyLink, TV speakers - 34  
Ecolabel - 11  
L
language, menu - 41  
language, subtitles - 42  
location, home or shop - 43  
end of use - 11  
energy efficient, settings - 10  
Energy label - 12  
M
media server program - 19  
EPG, broadcaster - 16  
EPG, Electronic Programme Guide - 4  
EPG, Internet - 16  
mode, home or shop - 43  
Multimedia Home Platform (MHP) - 23  
multimedia, play files - 19  
external hard disk - 52  
multimedia, supported formats - 64  
F
N
favourite channels, list - 14  
network, connect - 55  
network, TV name - 57  
G
game console - 49  
games - 29  
P
parental rating - 32  
pause TV - 25  
games, two player - 29  
PC, connect - 52  
H
PC, display resolutions - 63  
picture format - 16  
picture settings - 36  
picture settings, reset - 37  
Pixel Plus link - 34  
HbbTV - 23  
HDMI - 45  
HDMI ARC - 45  
hearing impaired - 42  
help, onscreen - 12  
Help, version - 66  
high-definition (HD), content - 3  
home mode - 43  
placement, stand or wall mount - 43  
position - 43  
power - 63  
EN  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
product support - 12  
R
Smart TV, applications - 21  
Smart TV, browse - 20  
Smart TV, network - 55  
smartphone control - 5  
software, check version - 44  
software, digital update - 44  
software, Internet - 44  
software, USB - 44  
rear controls - 4  
record, TV programmes - 26  
record, USB device - 26  
recorder, connect - 48  
recordings, manage - 29  
recordings, schedule - 27  
recordings, watch - 28  
recycle - 11  
sound settings, reset - 37  
standby - 13  
subtitles, analog - 42  
subtitles, digital - 42  
reinstall - 44  
remote control - 4  
subtitles, language - 42  
sustainability - 10  
remove, connected device - 55  
rename channels - 14  
rename, connected device - 55  
switch TV on, off - 13  
T
S
teletext, search - 31  
text 2.5 - 31  
safety - 6  
satellite, add or remove - 41  
satellite, install channels - 40  
satellite, settings - 40  
SCART - 46  
text, digital text - 31  
text, dual screen - 30  
text, enlarge - 30  
text, language - 30  
Scenea, enable - 35  
Scenea, load wallpaper - 35  
screen care - 7  
text, subpages - 30  
text, Table Of Pages - 30  
trademarks and copyrights - 9  
TV receiver, connect - 47  
TV speakers, mute - 13  
screen saver - 35  
sensors - 4  
settings, assistant - 36  
settings, audio format - 37  
settings, game - 29  
settings, picture - 36  
settings, sound - 37  
shop mode - 43  
U
universal access, enable - 42  
universal access, hearing impaired - 42  
universal access, visually impaired - 42  
USB keyboard - 53  
sleeptimer - 32  
USB mouse - 53  
smart settings - 15  
Smart TV - 3  
V
VGA - 46  
EN  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
visually impaired - 42  
volume - 13  
W
wall mount - 66  
wallpaper - 35  
wireless connection - 56  
Y
YouTube - 21  
YPbPr, component video - 45  
EN  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2012 TP Vision Netherlands B.V.  
All rights reserved.  
Document order number 313913705195  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco TV Mount PT55OP User Manual
Phase Technology Speaker CI 15 User Manual
Philips DVD Player DVD707 User Manual
Philips GPS Receiver 230CI User Manual
Pioneer Stereo Receiver VSXAX2ASs User Manual
Pitney Bowes Postal Equipment DM200I User Manual
Playskool Games 34676 User Manual
Polycom Server 3150 16966 002 User Manual
Poulan Chainsaw 530163637 User Manual
ProForm Home Gym 831285820 User Manual