User Manual
LCD TV
15PF8946/37
17PF8946/37
20PF8946/37
23PF8946/37
Thank you for choosing Philips.
Need help fast?
Read your User Manual and/or Quick-Use Guide first
for quick tips that make using your Philips product
more enjoyable. If you have read your instructions and
still need assistance you may access our online help at
or
call 1- 8888 - PHILIPS (744 - 5477)
while with your product.
Model No.:
Serial No.:
3139 125 33252
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
B. Objects have fallen, or liquid has been spilled into the appli-
ance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
7. Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
• Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ulti-
mately overturn the product.
• Also, do not endanger yourself, or children, by placing electron-
ic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product dam-
age and/or personal injury.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third ground-
ing prong. The wide blade or third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
18. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
21. Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
a) Warning: To reduce the risk of fire or electric shock, this appa-
ratus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
Example of Antenna Grounding
as per NEC - National Electric Code
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
ADDITIONAL SAFETY PRECAUTIONS
•
•
•
ENSURE that LCD TV stand is tightened properly to the set (See Quick Guide on the right way of tightening of the screw
of the stand to the set. Improper tightening of screw may render the set unsafe.
If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improperor incorrect instal
lation may render the set unsafe.
Disconnect mains plug when :
— cleaning theTV screen, never use abrasive cleaning agents.
— there is a lightning storm.
— the set is left unattended for a prolonged period of time.
•
•
•
Do not shift or move the LCD TV around when it is powered on.
Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.
When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or other soft material like
chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen. These chemicals will cause damage
to the surface.
•
•
•
Wipe off water, or saliva as soon as possible. These liquids can cause deformation and color fading of the LCD screen when
left exposed for some time.
Be careful of condensation when temperature changes occur. Condensation can cause damage to the LCD screen and elec
trically parts. After condensation fades, spots or blemishes will be present on the LCD screen.
CAUTION information is located on the inside of the VESA cover (see diagram below). To read information, open
the VESA cover.
POSITIONING THE LCD TELEVISON
•
•
•
•
Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of the LCD TV.
Try to leave at least 6 of space around each side of the LCD TV cabinet to allow for proper ventilation.
Do not place the LCD TV near a radiator or other sources of heat.
Do not place the LCD TV where it can be exposed to rain or excessive moisture.
RECYCLING PROCEDURE/END OF LIFE DISPOSAL
•
To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or nickel cadmium.
If possible, when disposing of batteries, use recycling means available in your area.
•
The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check your area for
companies that will recover used televisions for dismantling and collection of reusable materials, or contact your dealer for
TV recycling tips.
•
Please dispose of the carton and packing material through the proper waste disposal management in your area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
INTRODUCTION
Features
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Ins.tr.u.c.ti.o.n.s. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
INSTALLATION MENU
Active Control™ continuously measures and corrects all incoming
signals to help provide the best picture quality. This feature moni-
tors and corrects both the sharpness control and noise reduction
control.
Audio/Video Jack Panel allows direct connections with VCRs,
DVDs, or other devices, providing quality TV picture and sound
playback.
Audio Volume Leveler (AVL) Control keeps the TV sound at an
even level. Peaks and valleys that occur during program changes or
commercial breaks are reduced, making for a more consistent, com-
fortable sound.
AutoLock™ allows you to block the viewing of certain channels or
programs with certain ratings if you do not want your children to
view inappropriate materials.
AutoPicture™ allows you to change the picture settings (color,
tint, contrast, etc.) for various types of programming, such as
sports, movies, multimedia (games), or weak signals with the push
of one button.
AutoSound™ allows you to select from three factory-set controls
and a personal control that you set according to your own prefer-
ences through the onscreen Sound menu. The three factory-set con-
trols (Voice, Music, and Theatre) enable you to tailor the TV sound
so as to enhance the particular programming you are watching.
How to use the Language Controls . . . . . . . . . . . . . . . .6
How to use the Tuner Mode Controls . . . . . . . . . . . . . . . . . . . .6
How to use the Auto Program Controls . . . . . . . . . . . . . . . . . .7
How to use the Channel Edit Controls . . . . . . . . . . . . . . . . . . .7
PICTURE MENU CONTROLS
How to use the Picture Adjustment Controls . . . . . . . . 8
SOUND MENU CONTROLS
How to use the Sound Adjustment Controls . . . . . . . . .9
FEATURE MENU CONTROLS
How to use the Timer Menu Controls . . . . . . . . . . . .10
Understanding the AutoLock™ Controls . . . . . . . . . . . . . . . .11
Setting up an AutoLock™ Access Code . . . . . . . . . . . . . . . . .12
How to block channels using AutoLock™ . . . . . . . . . . . . . . .13
How to lock HD Channel using AutoLock™ . . . . . . . . . . . . .14
How to clear all locked channels at the same time . . . . . . . . .15
Blocking programs based on Movie Ratings . . . . . . . . . . . . . . . .16
Blocking programs based on TV Ratings . . . . . . . . . . . . . . . . . .17
Other AutoLock™ Blocking options . . . . . . . . . . . . . . . . . . .18
Using the AutoLock™ Review screen . . . . . . . . . . . . . . . . . .19
How to use the Contrast+ Control . . . . . . . . . . . . . . . . . . . . .20
How to use the Mode Control . . . . . . . . . . . . . . . . . . . . . . . . .20
Channel Edit allows you to add or delete channels from the list
stored in the TV s memory. Channel Edit makes it easy to limit or
expand the number of channels that are available to you when you
press the Channel (+) or (—) buttons on your remote control.
Closed Captioning allows the viewer to read TV program dialogue
or voice conversations as onscreen text.
REMOTE CONTROL RELATED FEATURES
Infrared Remote Control works your TV and other remote-con-
trolled devices, such as VCRs, DVD players, cable converters, and
satellite receivers.
Onscreen Menu shows helpful messages and instructions for set-
ting TV feature controls (can be viewed in English, French, or
Spanish).
How to use the Surf Control . . . . . . . . . . . . . . . . . . . . 21
How to use the Closed Captioning Control . . . . . . . . . . . . . .22
How to use the Sleeptimer Control . . . . . . . . . . . . . . . . . . . . .22
How to use the Program List Control . . . . . . . . . . . . . . . . . . .23
How to set the Active Control . . . . . . . . . . . . . . . . . . . . . . . .23
How to use the Format Control . . . . . . . . . . . . . . . . . . . . . . .24
How to use the AutoPicture™ Control . . . . . . . . . . . . . . . . . .25
How to use the AutoSound™ Control . . . . . . . . . . . . . . . . . .25
Sleep Timer automatically turns the TV OFF after a set amount of
time that you choose.
Timer allows you to set your TV to turn itself ON and OFF once or
daily like an alarm clock.
SETTING UP THE FM RADIO MODE
How to use the Mode Select Control . . . . . . . . . . . . .26
How to use the Install Controls . . . . . . . . . . . . . . . . . . . . . . . .26
How to use the Timer Controls . . . . . . . . . . . . . . . . . . . . . . . .27
How to use the Sound Controls . . . . . . . . . . . . . . . . . . . . . . .28
How to use the ScreenSaver Control . . . . . . . . . . . . . . . . . . .29
How to use the AutoSound™ Control . . . . . . . . . . . . . . . . . .29
SETTING UP THE PC (PERSONAL COMPUTER) MODE
How to use the Picture Controls . . . . . . . . . . . . . . . . .30
How to use the Audio Selection Control . . . . . . . . . . . . . . . . .30
How to use the PC Features Controls . . . . . . . . . . . . . . . . . . .31
Active Control, AutoPicture, and AutoSound Surround are trade-
marks of Philips Consumer Electronics Company. Copyright
2001 Philips Consumer Electronics.
*Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
SETTING UP THE HD (HIGH DEFINITION) MODE
How to use the HD Select Control . . . . . . . . . . . . . . .32
How to use the Timer Menu Controls . . . . . . . . . . . . . . . . . .32
How to use the Picture Controls . . . . . . . . . . . . . . . . . . . . . . .33
How to use the Sound Controls . . . . . . . . . . . . . . . . . . . . . . .34
How to lock the HD Channel . . . . . . . . . . . . . . . . . . . . . . . . .35
How to lock the HD Channel . . . . . . . . . . . . . . . . . . . . . . . . .35
QUICK USE AND SETUP GUIDE
s
ss
ss
s
s ot ao
ayt
ai
.
.
.
.
.
.
.
.
.
te t
.
.
ac c
st
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
e
.
.
.
.
.
.
.
.
.
sts
a
ts
i
.
.
.
.
.
.
.
.
I
I
I
l
t
.
.
sts
.
.
.
.
.
.
t t:
e
l
tl.
es. es
r ies.
lil io
ly (od
7oxb
l t
Refer to the simple Quick Use and Setup
Guide (supplied with your TV) for details
on making Connections and Remote
Control Operation.
cse
ss
ou
obf
eeee
lltit eiie
.
leiia.
etm l
lcs l
caeac
cse
s
, si
olo
eeee
llte l
.
IT
eaic,
a
a
l
O
t
e
on7
il
er it
test
.
leiia.
TEa
. t te
tt l
allase
Cae gar
tly
k l
f
P
i
or lg
o
s r
r
sbahnn7o) npg n
tt:
tor nonen
(obntiF
oiin tnrvol
.
Ae
l ul
IMPORTANT INFORMATION
hbo
nh
nna s
ot n1) d 16)
s e
3t-
dp
t
Ile ,
sae s se
re tt
tatt
t,
i
r
lia
e
ou
obcf
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
i.
Ett
ate ls il e
Ru5
ol b
nn
ss .
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE INSTALLATION FEATURES
LANGUAGE
TV Menu
or our Spanish and French-speaking TV own-
Fers, an onscreen Language option is present.
The Language control enables you to set the TV's
onscreen menu to be shown in either English,
Spanish or French.
TV Menu
Picture
Sound
Features
Install
Brightness
Color
Picture
Sound
Language
Picture
Sharpness
Tint
Tuner Mode
Auto Program
Channel Edit
Features
Install
Mode
Mode
Press the MENU button on the remote control
to show the onscreen menu.
1
Press the CURSOR DOWN button repeatedly
Install
until Install is highlighted.
5
1
2
É
Ñ
Language
Tuner Mode
Auto Program
Channel Edit
English
Press the CURSOR RIGHT button to access
the Install menu. Language will be highlighted.
É
É
É
3
4
3
Press the CURSOR RIGHT or CURSOR
LEFT button to select English, Francais or
4
Español.
OR
4
Press the STATUS/EXIT button to remove the
menu from the screen.
2
Idioma
Langue
Ñ
Español
É
É
5
OR
Ñ
Francais
TUNER MODE
TV Menu
he Tuner Mode allows you to change the TV's
Tsignal input to Cable, Antenna, or Auto Mode.
It s important for the TV to know what type of sig-
nal is connected, either Antenna or Cable.
TV Menu
Picture
Sound
Features
Install
Brightness
Color
Picture
Sound
Language
Picture
Sharpness
Tint
Tuner Mode
Auto Program
Channel Edit
Features
Install
Mode
Press the MENU button on the remote control
to show the onscreen menu.
Mode
1
Press the CURSOR DOWN button repeatedly
until Install is highlighted.
2
Install
Press the CURSOR RIGHT button to access
the Install menu. Language is highlighted.
3
6
1
É
Ñ
Language
English
Tuner Mode
Auto Program
Channel Edit
É
É
Press the CURSOR DOWN button to select
the Tuner Mode control.
3
É
4
5
Press the CURSOR RIGHT or CURSOR
LEFT button to select Cable, Antenna, or
5 Auto. If Tuner Mode is set to Auto, Auto
5
Install
Porgram will detect if a cable signal is present.
2
4
Language
Tuner Mode
Auto Program
Channel Edit
É
Press the STATUS/EXIT button to remove the
É
Ñ
Cable
menu from the screen.
É
6
É
OR
É
Ñ
Tuner Mode
Tuner Mode
Antenna
OR
É
Ñ
Auto
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE INSTALLATION FEATURES
AUTO PROGRAM
TV Menu
our TV can automatically set itself for local area
Y(or cable TV) channels. This makes it easy for
you to select only the TV stations in your area by
pressing the CHANNEL (+) or (–) button.
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Mode
Press the MENU button on the remote control to
show the onscreen menu.
TV Menu
1
Picture
Sound
Language
Press the CURSOR DOWN button repeatedly
Tuner Mode
Auto Program
Channel Edit
Features
Install
until Install is highlighted.
2
Mode
Press the CURSOR RIGHT button to enter the
Install menu. Language will be highlighted.
3
Press the CURSOR DOWN button repeatedly
Install
until Auto Program is selected. Start ? will
6
1
3
5
4
appear.
Language
Tuner Mode
É
É
Press the CURSOR RIGHT button to start the
Auto Programming process.
Auto Program
Channel Edit
Ñ
Start ?
É
É
5
Press the STATUS/EXIT button to remove the
menu from the screen when the Auto programming
process has finished.
2
4
6
Auto Program
É
Channel
8
Ñ
É
CHANNEL EDIT
TV Menu
hannel Edit makes it easy for you to add or delete
Cchannels from the list of channels stored in the TV's
memory.
Picture
Sound
Features
Install
Brightness
TV Menu
Color
Picture
Sharpness
Tint
Picture
Sound
Language
Tuner Mode
Auto Program
Channel Edit
Press the MENU button on the remote control to
show the onscreen menu.
Mode
Features
Install
1
Mode
Press the CURSOR DOWN button repeatedly until
Install is highlighted.
2
Press the CURSOR RIGHT button to enter the
Install menu. Language will be highlighted.
3
Install
3
5
6
8
Press the CURSOR DOWN button repeatedly until
Channel Edit is selected.
Language
Tuner Mode
É
É
É
É
Channel
Skipped
9
1
Auto Program
Channel Edit
4
Press the CURSOR RIGHT button to enter the
Channel Edit menu. Channel will be highlighted.
5
Press the CURSOR RIGHT or CURSOR LEFT
buttons to scroll through the list of available chan-
6 nels, you can also press the CH+ or CH- to scroll
6
2
4
7
6
Channel Edit
8
through the list of channels. Or, press the numbered
buttons to select a specific numbered channel.
Channel
Ñ
8
É
Skipped
É
Press the CURSOR DOWN button to select
Skipped while you are tuned to the channel to be
7 skipped.
6
Press the CURSOR LEFT or CURSOR RIGHT
button to select On to activate the skipping of a chan-
8 nel. Or, select Off, to deactivate the skipping of a
Channel Edit
channel.
Channel
É
Skipped
Ñ
On
É
Press the STATUS/EXIT button to remove the
onscreen menu from the screen.
9
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
o adjust your TV picture controls, select a channel
Tand follow these steps.
TV Menu
Press the MENU button on the remote control
to show the onscreen menu.
Picture
Sound
Features
Install
Brightness
Color
1
2
3
4
Picture
Sharpness
Tint
Press the CURSOR DOWN button to highlight
Picture.
Mode
Picture
Press the CURSOR RIGHT button to enter the
Picture menu. Brightness will be highlighted.
Brightness
Color
48
É
É
É
É
É
Picture
Sharpness
Tint
Press the CURSOR UP or CURSOR DOWN
button to select the picture adjustment you want
to change: Brightness, Color, Picture,
Sharpness, Tint, or Color Temp..
Color Temp
Picture
6
1
5
Press the CURSOR LEFT or CURSOR
RIGHT button to adjust the selected control.
4
Brightness
Color
É
38
5
6
Picture
É
É
É
É
Sharpness
Tint
Press the STATUS/EXIT button when finished
3
5
Color Temp
to remove the menu from the screen.
2
Picture
4
Brightness
Color
É
É
Picture
42
Sharpness
Tint
É
É
É
Color Temp
Picture
Brightness
Color
É
É
É
Picture
Sharpness
Tint
2
É
É
Color Temp
▼
Picture
Picture
Brightness
Color
É
É
É
É
É
Brightness
Color
É
É
É
É
É Picture
Sharpness
Tint
Picture
Sharpness
Tint
3
É
Ñ
Color Temp
Normal
Color Temp
É
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
o adjust your TV sound controls, select a channel and
TV Menu
Tfollow these steps.
Picture
Sound
Features
Install
Equaliser
Balance
AVL
Press the MENU button on the remote control
to show the onscreen menu. Picture will be high-
lighted.
Dolby Virtual
SAP
1
Mode
Sound
Press the CURSOR DOWN button to highlight
Sound.
Equalizer
Balance
AVL
É
É
É
É
É
É
120 Hz
500 Hz
1500 Hz
5 KHz
2
3
4
Dolby Virtual
SAP
10 KHz
Press the CURSOR RIGHT button to enter the
Sound
sound menu.
Press the CURSOR UP or CURSOR DOWN
button to select the sound adjustment you want
to change: Equalizer, Balance, AVL, Dolby
Virtual, SAP, or Sound.
6
Sound
4
Equalizer
Balance
AVL
É
0
1
5
É
É
É
É
3
5
Dolby Virtual
SAP
Press the CURSOR LEFT or CURSOR
RIGHT button to adjust the selected control.
Sound
5
NOTE : If Equaliser is selected, press the
CURSOR RIGHT button to enter Equaliser
menu and press the CURSOR UP or
CURSOR DOWN button to select from
120Hz to 10KHz. Then press the CURSOR
LEFT or CURSOR RIGHT button to adjust
the selected control.
2
Sound
4
Equalizer
Balance
AVL
É
É
Ñ
On
É
Dolby Virtual
SAP
É
É
Sound
É
Press the STATUS/EXIT button when finished
to remove the menu from the screen.
▼
Sound
Sound
6
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
Ñ
É
Dolby Virtual
SAP
Dolby Virtual
Ñ
É
Dolby Virtual
SAP
Stereo
É
É
É
É
É
Sound
Sound
OR
▼
Sound
Sound
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
É
Ñ
Dolby Virtual
SAP
Spatial
Ñ
É
Dolby Virtual
SAP
Mono
É
É
OR
É
É
É
Sound
Sound
▼
Sound
Sound
Equalizer
Balance
AVL
É
É
É
É
Equalizer
Balance
É
É
É
É
AVL
Dolby Virtual
SAP
Dolby Virtual
OR
Ñ
É
Ñ
É
Off
SAP
On
É
Sound
É
Sound
É
▼
Sound
Sound
Equalizer
Balance
AVL
É
É
É
É
É
Equalizer
Balance
AVL
É
É
É
É
É
Dolby Virtual
SAP
Dolby Virtual
SAP
OR
Ñ
É
Ñ
Sound
Stereo
É
É
Sound
Mono
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TIMER MENU CONTROLS
our television comes with an onscreen clock. The
YTV can also be set to turn on or off at a specific
time and tune to a specific channel when it powers
itself on.
TV Menu
Picture
Sound
Timer
Features
Press the MENU button on the remote control to
Autolock
Features
Install
Contrast +
show the onscreen menu.
Timer
Autolock
Time
É
É
É
Active Control
1
Start Time
Stop Time
Channel No.
Activate
Mode
Contrast +
Press the CURSOR DOWN button to highlight
Features.
Active Control
É
2
Press the CURSOR RIGHT button to enter the
Features menu.
3
Timer
Press the CURSOR UP or CURSOR DOWN
É
Ñ
Time
— — : — — PM
button to highlight one of the Timer controls.
Start Time
Stop Time
Channel No.
Activate
É
4
These controls are Time, Start Time, Stop
É
4
É
É
É
Time, Channel No., Activate, or Display.
6
Display
Press the CURSOR RIGHT or CURSOR
3
5
LEFT button to make adjustments or to toggle
1
5
5
the On or Off.
Timer
Time : Enter the current time using the Numbered
buttons. Use the CURSOR LEFT or CURSOR
RIGHT buttons to toggle the AM and PM setting.
2
Time
Start Time
Stop Time
Channel No.
Activate
É
— — : — — PM
É
Ñ
4
É
É
É
É
Start Time: Use the numbered buttons to enter
the time you want the channel to turn itself On.
Use the CURSOR RIGHT and CURSOR LEFT
buttons to toggle the AM and PM setting.
Display
5
5
Stop Time: Use the numbered buttons to enter
the time you want the TV to turn itself Off. Use
the CURSOR RIGHT and CURSOR LEFT but-
tons to toggle the AM and PM setting.
Timer
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
Ñ
— — : — — PM
É
É
É
Channel No. : Use the NUMBERED buttons or
the CH + or CH- buttons to enter the desired
start-up channel. You can also press the CUR-
SOR RIGHT or CURSOR LEFT buttons to
enter the desired start-up channel.
Display
Timer
Activate: Set the timer to turn itself On (Once
or Daily) or Off. Press the CURSOR RIGHT
and CURSOR LEFT buttons to select Once,
Daily, or Off.
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
É
Ñ
8
É
É
Display
Display: Press the CURSOR RIGHT or CUR-
SOR LEFT to toggle between On or Off. If On
is selected, the time will be displayed all the
time when the TV is on. When Off is selected,
the time will only appear when the
▼
Timer
Time
Timer
STATUS/EXIT button is pressed.
É
É
É
É
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
É
É
Start Time
Stop Time
Channel No.
Activate
Press the STATUS/EXIT button to remove the
menu from the screen.
É
Ñ
6
Once
É
Ñ
Display
É
Display
On
É
10
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE AUTOLOCK™ CONTROLS
he AutoLock™ feature receives and
Tprocesses data sent by broadcasters or
other program providers that contain pro-
gram content advisories. When programmed
by the viewer, a TV with AutoLock™ can
respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence,
sexual situations, etc.). This is a great feature
to censor the type of programming children
may watch.
Movie Rating
TV Rating
É
Ñ
É
G
PG
On
Ñ
TV-Y
TV-Y7
TV-G
On
É
É
É
É
É
PG-13
R
É
É
É
É
TV-PG
TV-14
NC-17
X
TV-MA
É
TV PARENTAL GUIDELINES
MOVIE RATINGS
In the AutoLock™ section, you ll learn how
to block channels and programming that is
not rated, is unrated, or has no rating. You
will also find out how to turn these blocking
features ON or OFF. Following are brief
explanations of some terms and ratings relat-
ed to the AutoLock™ feature.
(TV BROADCASTERS)
(MOTION PICTURE ASSOCIATION OF AMERICA)
G: General Audience - All ages admitted.
Most parents would find this programming
suitable for all ages. This type of program-
ming contains little or no violence, no
strong language, and little or no sexual dia-
logue or sexual situations.
TV-Y: (All children -- This program is
designed to be appropriate for all children.)
Designed for a very young audience, including
children ages 2-6. This type of programming is
not expected to frighten younger children.
TV-Y7: (Directed to Older Children -- This
program is designed for children ages 7 and
above.) It may be more appropriate for children
who have acquired the development skills
needed to distinguish between make-believe
and reality. This programming may include
mild fantasy and comic violence (FV).
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
AutoLock™ offers various Blocking
Options from which to choose:
BLOCKING: The BLOCKING control is
what can be thought of as the master switch
for AutoLock™. This control affects the set-
tings you have chosen for blocking programs
according to movie ratings or TV ratings, or
for blocking programs that have no rating or
are unrated. When the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
TV-G: (General Audience -- Most parents
would find this program suitable for all ages.)
This type of programming contains little or no
violence, no strong language, and little or no
sexual dialogue or sexual situations.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue.
TV-PG: (Parental Guidance Suggested --
This program contains material that parents
may find unsuitable for younger children.) This
type of programming contains one or more of
the following: Moderate violence (V), some
sexual situations (S), infrequent coarse lan-
guage (L), or some suggestive dialogue (D).
R: Restricted -This programming is specifi-
cally designed for adults. Anyone under the
age of 17 should view this programming
only with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence; intense sexual situ-
ations; strong, coarse language; or intensely
suggestive dialogue.
NO RATING: ALL programming with no
content advisory data can be blocked if NO
RATING is set to ON.
TV-14: (Parents Strongly Cautioned -- This
program contains some material that many
parents would find unsuitable for children
under 14 years of age.) This type of program-
ming contains one or more of the following:
intense violence (V); intense sexual situations
(S); strong, coarse language (L); or intensely
suggestive dialogue (D).
Programming that has No Rating is not
encoded with any rating information from the
MPAA or the Parental Guidelines. Any pro-
gramming could fall into this category.
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence; explicit sex; or crude, indecent lan-
guage.
You also can block individual channels or
block programming based on ratings of the
MPAA and TV broadcasters. (See a descrip-
tion of the ratings on this page.)
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
TV-MA: (Mature Audience Only -- This pro-
gram is specifically designed to be viewed by
adults and therefore may be unsuitable for chil-
dren under 17.) This type of programming con-
tains one or more of the following: graphic vio-
lence (V); explicit sexual situations (S); or
crude, indecent language (L).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP AN AUTOLOCK™ ACCESS CODE
TM
utoLock allows parents to block out or
censor any channels they think childr en
TV Menu
A
should not watch. A channel blocked by the
TM
Picture
Sound
Timer
AutoLock control cannot be viewed until a cor-
Features
Autolock
rect access code is used to unlock the channel
for viewing. First, let s set your AutoLock access
code.
Features
Install
Contrast +
Active Control
Timer
Autolock
É
É
É
É
Mode
Contrast +
Press the MENU button on the remote
Active Control
control to show the onscreen menu.
1
Press theCURSOR DOWN button to
highlight Features.
2
Press the CURSOR RIGHT button to
display the Features menu.
Features
3
Press the CURSOR DOWN button to
Timer
Autolock
É
Access Code
É
highlight the AutoLock control.
Ñ
É
É
4
****
Incorrect
Contrast +
8
Press the CURSOR RIGHT button to
É
Active Control
enter the AutoLock mode. Access Code
3
5
5
---- will appear.
1
Using the numbered buttons on the
remote control, enter the access code. If
6
you do not know your code, 0,7,1,1 is the
default code. After you have entered the
code once, Incorrect will appear on the
screen. Enter the code a second time. It
will then prompt you to change code.
Features
2
4
Timer
É
Change Code
— — — —
Autolock
É
Ñ
É
É
É
6
7
Contrast +
Active Control
Using the numbered buttons on the
remote control, enter the access code
7
of your choice. Enter the code a second
time to confirm it. Once the new code is
confirmed, the AutoLock menu will
appear. You can proceed to access the
functions available in the menu.
Features
Timer
É
Confirm Code
If you do not wish to access the other
Autolock
É
Ñ
É
É
É
— — — —
fuctions, press the STATUS/EXIT
8
Contrast +
button to remove the menu from the
screen.
Active Control
Features
Timer
Autolock
É
É
É
É
Confirm Code
x x x x
É
Ñ
Contrast +
Confirmed
Active Control
NOTE TO PARENTS: It isn t possible for
your child to unblock a channel without know-
ing your access code or changing it to a new
one. If your code has been changed without
your knowledge, then you will become aware
that blocked channels may have been viewed.
AutoLock
Block Channel
Lock HD
Ñ
É
On
É
Change Code
Clear All
É
É
É
É
Block All
Movie Rating
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK CHANNELS USING AUTOLOCK™
fter your personal access code has been
Aset (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
TV Menu
Features
Picture
Sound
• Timer
Timer
É
É
• Autolock
Autolock
Features
Install
• Contrast +
Press the MENU button on the
remote control to show the onscreen
Active Control
Contrast +
É
É
1
Active Control
Mode
menu.
Press the CURSOR DOWN button
to highlight Features.
2
Features
Press the CURSOR RIGHT button
to display the Features menu.
Timer
É
É
Access Code
3
Autolock
– – – –
Contrast +
É
É
Press the CURSOR DOWN button
to highlight AutoLock™.
3
5
Active Control
4
5
11
Press the CURSOR RIGHT button
again display the Access Code menu
prompt.
7
1
10
Features
Timer
É
É
Access Code
****
Enter your four-digit ACCESS
É
2
4
9
Ñ
Autolock
CODE. Correct will flash very briefly
and the AutoLock™ will be accessible.
Contrast +
É
É
6
Active Control
Correct
You can choose to block individual
6
channels or all channels at the same
7
8
time. For individual channels, press the
CURSOR RIGHT to enter the Lock
Channel menu.
AutoLock
É
Block Channel
Lock HD
Ñ
Off
É
Change Code
Clear All
É
É
É
É
Using the numbered buttons or the
CH+ or CH- buttons enter the chan-
nel you wish to lock.
8
Block All
Movie Rating
Repeat step 8 for any channels you want to
lock.
AutoLock
To block all channels, press the CUR-
SOR DOWN button until Block All
is selected.
Block Channel
On
9
Lock HD
Change Code
Clear All
É
É
É
É
É
Press the CURSOR RIGHT button to
Block All
Movie Rating
select On to activate the blocking of all
10
channels. To deactivate the blocking of
all channels, select Off.
Press the STATUS/EXIT button to
remove the menu from the screen.
Channel 2
Channel Blocking
11
Access Code
NOTE TO PARENTS: It isn t possible for
your child to unblock a channel without knowing
your access code or changing it to a new one. If
your code has been changed without your
knowledge, then you will become aware that
blocked channels may have been viewed.
É
Ñ
– – – –
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO LOCK A HD (HIGH DEFINITION) CHANNEL IN TV MODE
ou can also lock the HD (High Definition)
Ychannel while in TV Mode using the
TV Menu
AutoLock™ feature.
Features
Picture
Sound
Timer
Autolock
Press the MENU button on the
Timer
Autolock
É
É
É
É
Features
Install
Contrast +
remote control to show the onscreen
menu.
1
Active Control
Contrast +
Mode
Active Control
Press the CURSOR DOWN button to
highlight Features.
2
Press the CURSOR RIGHT button
to display the Features menu.
Features
3
Timer
Autolock
É
É
É
É
Access Code
Press the CURSOR DOWN button to
select the AutoLock™ control.
– – – –
É
Ñ
4
3
5
8
2
4
7
Contrast +
Active Control
9
1
Press the CURSOR RIGHT button
again to highlight Access Code.
5
Enter your four-digit Access Code,
“Correct will briefly appear on the
screen and the AutoLock menu will be
accessible.
6
Features
Timer
É
Access Code
* * * *
É
Ñ
É
Autolock
Contrast +
É
É
Press the CURSOR DOWN button to
Correct
Active Control
select Lock HD.
7
6
Press the CURSOR RIGHT button
to select On to activate the blocking of
the HD channel.
8
AutoLock
Press the STATUS/EXIT button to
remove the menu from the screen.
Block ChannelÉ
Ñ
Off
É
9
Lock HD
Change Code
Clear All
É
É
É
Block All
Movie Rating
É
Channel 2
AutoLock
Block ChannelÉ
Channel Blocking
Ñ
On
É
Lock HD
Access Code
Change Code
Clear All
É
É
É
É
Ñ
É
– – – –
Block All
Movie Rating
If a channel is blocked by the Block Channel or Block
All option, the TV will display the screen shown above.
To watch the selected blocked channel or all the
blocked channels, enter your Access Code or change
the Block Channel or Block All option to Off.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CLEAR ALL LOCKED CHANNELS AT THE SAME TIME
arious onscreen messages will appear
TV Menu
Vwhen someone tries to view blocked pro-
gramming. The message is determined by how
Picture
Sound
Timer
the current programming is blocked. You may
view the blocked programming and turn OFF
the AutoLock™ feature by using the Clear All
control or by entering your access code.
Autolock
Features
Features
Install
Contrast +
Active Control
Timer
É
É
Mode
Autolock
Contrast +
É
É
Active Control
Press the MENU button on the
remote control to show the onscreen
menu.
1
Press the CURSOR DOWN button to
highlight Features.
Features
2
Timer
Autolock
É
Access Code
Press the CURSOR RIGHT button
to display the Features menu.
– – – –
É
É
É
É
Ñ
Contrast +
3
10
3
5
7
9
Active Control
Press the CURSOR DOWN button to
select the AutoLock™ control.
1
4
Press the CURSOR RIGHT button
again to highlight Access Code.
5
Features
Enter your four-digit Access Code,
“Correct will briefly appear on the
screen and the AutoLock menu will be
accessible.
2
4
8
Timer
Autolock
É
Access Code
****
É
Ñ
É
É
É
6
6
Contrast +
Correct
Active Control
Press the CURSOR RIGHT button
to enter the AutoLock menu.
7
Press the CURSOR DOWN button to
select Clear All. Clear? will appear on
the screen.
AutoLock
Block ChannelÉ
8
É
É
Lock HD
Change Code
Clear All
Press the CURSOR RIGHT button
to activate the clearing of all channels.
É
Ñ
Clear?
Block All
É
É
9
Movie Rating
Press the STATUS/EXIT button to
remove the menu from the screen.
10
AutoLock
Block ChannelÉ
É
É
Lock HD
Change Code
Clear All
É
Ñ
Cleared
Block All
É
É
Movie Rating
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
fter your personal access code has been
TV Menu
Aset, you can select specific movie ratings
that you want to censor.
Picture
Sound
Timer
Autolock
Features
Features
Install
Contrast +
Active Control
Press the MENU button on the
remote control to show the onscreen
menu.
Timer
Autolock
É
É
É
É
1
Mode
Contrast +
Active Control
Press the CURSOR DOWN button
to highlight Features.
2
Press the CURSOR RIGHT button
to display the Features menu.
3
Features
3
5
Press the CURSOR DOWN button to
highlight the AutoLock™ control.
Timer
Autolock
É
Access Code
4
– – – –
É
É
É
É
Ñ
12
Contrast +
Press the CURSOR RIGHT button
again to highlight Access Code.
Active Control
7
5
1
9
11
Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
6
Features
2
4
Timer
É
É
Access Code
****
Correct
6
Press the CURSOR RIGHT button
É
Ñ
Autolock
Contrast +
É
É
to display the AutoLock menu.
7
Active Control
8
Press the CURSOR DOWN repeated-
ly until Movie Rating is highlighted.
10
8
Press the CURSOR RIGHT button
and the Rating menu shifts to the left
with G highlighted.
9
10
11
Movie Rating
AutoLock
Block ChannelÉ
Press the CURSOR UP or DOWN
buttons to highlight each rating you
want.
▼
É
Ñ
G
Off
•
•
G
É
É
É
É
É
PG
É
PG
Lock HD
Change Code
Clear All
PG-13
É
É
É
É
É
•
•
•
PG-13
R
R
NC-17
X
Block All
NC-17
Press the CURSOR RIGHT button
to turn the rating ON or OFF. Turning
the rating ON will block programs with
that rating from being seen.
Movie Rating
Press the STATUS/EXIT button to
remove the menu from the screen.
12
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON TV RATINGS
ou can select specific TV ratings that you
TV Menu
Ywant to censor by following these steps.
Picture
Sound
Timer
Autolock
Features
Press the MENU button on the
Features
Install
Contrast +
remote control to show the onscreen
menu.
Active Control
Timer
É
É
1
Mode
Autolock
Contrast +
É
É
Active Control
Press the CURSOR DOWN button
to highlight Features.
2
Press the CURSOR RIGHT button
to display the Features menu.
3
3
5
Features
Press the CURSOR DOWN button to
highlight the AutoLock™ control.
Timer
Autolock
É
Access Code
4
– – – –
É
É
É
Ñ
7
13
Press the CURSOR RIGHT button
again to highlight Access Code.
Contrast +
Active Control
É
9
5
1
11
12
Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
6
Features
2
4
Timer
Autolock
É
Access Code
Press the CURSOR RIGHT button
6
É
Ñ
É
É
É
****
to display the AutoLock menu.
7
Contrast +
Correct
Active Control
8
Press the CURSOR DOWN button
repeatedly until TV Rating is high-
lighted.
10
8
Press the CURSOR RIGHT button
to enter the TV RATING menu.
9
TV Rating
AutoLock
Press the CURSOR UP or DOWN to
select a desired rating (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-MA).
▼
É
Ñ
TV
TV
TV
TV
TV
-
Y
On
TV Rating É
•
•
TV
TV
-
-
Y
10
É
É
É
É
-
Y7
É
Y7
Block Options
-
G
PG
14
•
TV
TV
TV
-
G
-
•
•
-
-
PG
14
-
Press the CURSOR RIGHT or LEFT
to turn the block on the rating On or
Off.
É
11
NOTE: More specific subratings (for violence,
sexual content, dialogue, or fantasy violence)
are available for TV-Y7, TV-PG, TV-14, and
TV-MA. (Refer to page 11 for definitions.)
▼
TV Rating
TV PG
TV
TV
TV
TV
TV
-
Y
É
É
É
É
É
•
Block All
Block All
Ñ
On
É
•
•
•
•
V
S
L
-
Y7
V
S
L
É
-
G
PG
14
É
É
É
To access these subratings, with the
-
D
-
D
main rating selected, press the CUR
SOR RIGHT. Then, repeat steps 10-
11 to turn the sub-ratings ON or
OFF.
É
12
Press the STATUS/EXIT button to
remove the menu from the screen.
13
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER AUTOLOCK™ BLOCKING OPTIONS
he AutoLock™ control offers the viewer
TV Menu
Tother blocking options as well. With
Block Options, the censoring can be turned
On or Off.
Picture
Sound
Timer
Autolock
Features
Features
Install
Contrast +
Active Control
Timer
Autolock
É
É
Press the MENU/SELECT button on
Mode
the remote control to show the
Contrast +
É
É
1
onscreen menu.
Active Control
Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
2
Press the CURSOR RIGHT button
to display the Features menu.
3
Features
3
5
Press the CURSOR DOWN button to
highlight the AutoLock™ control.
4
Timer
Autolock
É
Access Code
– – – –
É
É
É
É
Ñ
12
Press the CURSOR RIGHT button
again to highlight Access Code.
5
Contrast +
Active Control
7
1
9
11
Enter your four-digit Access Code.
Correct will flash very briefly and the
6
menu will move to the left with the
AutoLock menu now accessible.
Features
Press the CURSOR RIGHT button
to display the AutoLock menu.
7
2
4
Timer
É
Access Code
****
6
É
Ñ
Autolock
É
É
É
Press the CURSOR DOWN button
repeatedly until Block Options is high-
Contrast +
Active Control
Correct
8
8
lighted.
10
Press the CURSOR RIGHT button
to enter the Block Options menu.
9
Press the CURSOR UP or DOWN
buttons to select the desired block
10option.
AutoLock
AutoLock
TV Rating É
▼
Blocking: Might be called the master
switch for AutoLock™. When On,
ALL blocking/censoring will take place.
When Off, ALL blocking is disabled.
TV Rating É
•
•
TV
TV
-
-
Y
•
•
Unrated
É
Y7
Block Options
É
No Rating
Blocking
Block Options
•
TV
TV
TV
-
G
•
•
•
-
-
PG
14
É
Block Unrated: ALL unrated programs
based on the Movie Ratings or
Parental (TV) Guidelines can be
blocked if this feature is set to On and
the Blocking feature is set to OFF.
Block Options
Block Options
No Rating: ALL programming with
NO content advisory data can be
blocked if set to On and the Blocking
feature is set to OFF.
É
Unrated
On
Ñ
Unrated
No Rating
Blocking
É
▼
É
No Rating
Blocking
On
É
Ñ
É
É
Press the CURSOR RIGHT or
LEFT to toggle BLOCKING ON or
11OFF.
É
Press the STATUS/EXIT button to
remove the menu from the screen.
12
Block Options
Unrated
No Rating É
É
Blocking
On
É
Ñ
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTOLOCK™ REVIEW SCREEN
o remind you wich rating you have locked
Tand which Block Options you have selected,
TV Rating
a review screen is available to review your
Movie Rating
TM
AutoLock settings. To access this screen follow
G
PG
Off
On
TV-7
Off
On
On
On
On
On
On
On
the steps below.
TV - Y7
TV - G
PG - 13
R
NC - 17
On
On
Press the STATUS/EXIT button on the
TV - PG
TV - 14
MA
Off
Off
remote control TWICE. Your
X
1
AutoLock™ settings will appear on the
Unrated
No Rating
screen.
NOTE: If you have blocked specific subratings,
such as V for violence in the TV-PG category,
these blocked subratings will not appear in the
review. The subratings however are still blocked
according to your selections.
After a few seconds, the settings will
leave the screen automatically, or you can
2 press the STATUS/EXIT button a third
time to remove them from the screen.
1
2
This display will appear after Step One
(above) is completed if the AutoLock™
This display will appear after Step One
(above) is completed if the AutoLock™
Block Option is set to On.
Block Option is set to Off.
TV Rating
Movie Rating
G
PG
PG - 13
R
NC - 17
Off
On
On
On
TV-7
TV - Y7
TV - G
TV - PG
TV - 14
MA
Unrated
No Rating
Off
On
On
On
On
On
On
On
AutoLock Disabled
Off
Off
X
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CONTRAST+ CONTROL
ne Contrast + function helps to sharpen the pic-
TV Menu
Tture quality. The black portions of the picture
become richer in darkness and the white portions
become brighter.
Picture
Sound
•
•
•
•
Timer
Features
Autolock
Features
Install
Contrast +
Active Control
Timer
Time
É
É
Autolock
Start Time
Stop Time
Program No.
Activate
Mode
Press the MENU button on the remote control
Contrast +
É
É
Active Control
to show the on-screen menu.
1
Press the CURSOR DOWN to highlight
Features.
Features
2
Timer É
Press the CURSOR RIGHT to access the
Features menu.
Autolock
Contrast +
É
É
É
É
Off
Ñ
3
Active Control
Press the CURSOR DOWN button until the
Contrast + control is highlighted.
6
3
5
4
Features É
Timer É
Press the CURSOR RIGHT or LEFT to tog-
gle the On or Off option.
1
5
5
Autolock
Contrast +
É
É
É
É
On
Ñ
Press the STATUS/EXIT button to remove
the menu from the screen.
Active Control
2
4
6
HOW TO USE THE MODE CONTROL
ne Mode Control will allow you to use the TV into
TV Menu
Tthe TV, FM, or VGA Modes. Depending on
how the TV will be used, these modes may have their
own onscreen menu controls to optimize capability
when used with computers, radios, or high-definition
receivers.
Picture
Sound
Features
Install
Brightness
Color
TV Menu
Picture
Sharpness
Tint
Picture
Sound
TV
FM Radio
PC
Mode
Features
Install
HD
Press the MENU button on the remote con-
Mode
trol to show the onscreen menu.
1
TV Menu
Press the CURSOR UP or CURSOR DOWN
button to highlight Mode.
Picture
Sound
TV
2
FM Radio
PC
É
2
4
Features
Install
Press the CURSOR RIGHT to access the
HD
3 Mode menu.
Mode
5
1
Press the CURSOR UP or CURSOR DOWN
3
4
button until the desired Mode ( FM Radio.
TV Menu
5
2
4
VGA or HD) is highlighted.
Picture
Sound
TV
FM Radio
PC
After you have highlighted the desired mode
is selected, press the CURSOR RIGHT but-
ton to enter the selected Mode.
Features
Install
É
HD
5
Mode
NOTE: You can also press the dedicated button on the
remote control to change the Mode.
TV Menu
Picture
Sound
TV
FM Radio
PC
Features
Install
HD
É
Mode
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE SURF CONTROL
list or series of previously viewed channels
Surf List
Add?
Acan be selected with the SURF button on your
remote control. With this feature, you can easily
switch between different TV channels that current-
ly interest you. The SURF control allows you to
set up to ten channels in its quick viewing list.
2
Surf List
Delete?
Surf List Empty
2
Press the CHANNEL(+) or (–) button
(or the numbered buttons) to select a chan-
1 nel to add to the SURF list.
Press the SURF button on the remote
control. The onscreen display may read,
2
SURF LIST EMPTY. The number of
the current channel will be shown with
ADD? to the right.
Surf List
Add?
2
3
While the SURF list message or the SURF
channel list appears on the screen, press
3
4
1
1
2
3 the CURSOR RIGHT button to add the
present channel to the SURF list.
If you want to delete the present channel
from the SURF list, press the CURSOR
4 RIGHT button again.
Repeat steps 1 through 3 to add more channels
(up to 10) to the SURF list.
Surf List
Delete?
2
3
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows you to read the voice
Ccontent of television programs on the TV screen.
Designed to help the hearing impaired, this feature
uses onscreen text boxes to show dialogue and con-
versations while the TV program is in progress.
CC Off
Press the CC button on the remote control to
select a caption mode: CC Off, CC1, CC2, or
1
CC1
CC Mute if the TV station broadcasting on the
channel is making Closed Captioning available.
To turn the Closed Captioning off, select CC
Off.
1
2
CC2
Press the STATUS/EXIT button to remove
the menu from the screen.
2
CC Mute
JOHN: Why did they move the meeting up to this week?
MARSHA:
I
don
t
know, but they are pushing to close the deal.
HOW TO USE THE SLEEPTIMER CONTROL
ave you ever fallen asleep in front of the TV, only to
Hhave it wake you up at two in the morning with a
test pattern sound screeching in your ears? Well, your
TV can enable you to avoid that discomfort by automat-
ically turning itself off. With the Sleeptimer feature, ou
can set a timer to automatically switch the TV off after
a period of time you choose (15-minute increments up
to 60 minutes, then 30-minute increments up to 90
minute increments, and 60-minute increments up to 240
miutes).
Sleep Off
Sleep 15
OR
Sleep 30
OR
1
2
Press the SLEEP button on the remote control.
The Sleeptimer will appear in the lower part of
1 the screen.
Sleep 45
OR
Within five seconds, press the SLEEP button
repeatedly to pick the amount of time (15-minute
2 increments up to 60 minutes, then 30-minute
Sleep 60
OR
Sleep 90
OR
increments up to 90 minute increments, and 60-
minute increments up to 240 miutes) before the
TV will turn itself off.
Sleep 120
OR
Sleep 180
An onscreen countdown will appear during the last
minute before the TV shuts itself off.
OR
Sleep 240
Goodbye
Sleep 9
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE PROGRAM LIST CONTROL
he Program List Control will allow you to
Tquickly overview all the programmed
channels that have been placed into the tele-
visions memory (see the Auto Programming
section of this manual for more details).
Program List will let you easily select the
desired channels your looking for. Program
List will display the channel number, the
name of the channel if you have given it one,
and whether it have AutoLock turn on or off.
Program List
Ñ
2
3
4
5
6
É
Program List
2
3
4
5
6
Ñ
É
Press the PROGRAM LIST button
on the remote control to show the cur-
rent list of installed channels (the cur-
rent channel will be highlighted).
1
1
4
2
3
Press the CURSOR UP or DOWN
buttons to scroll the list of channel,
2
highlighting the one you want to acti-
vate.
2
Press the CURSOR RIGHT button
to activate the channel. The TV will
tune to that channel.
3
4
Press the STATUS/EXIT button to
remove the menu from the screen.
HOW TO SET THE ACTIVE CONTROL
he Active Control monitors and adjusts
Tincoming video signals to help provide
the best picture quality.
TV Menu
Picture
Sound
Timer
Autolock
Features
Install
Contrast +
Active Control
When you choose to turn the Active Control
ON, the picture sharpness and noise reduc-
tion are controlled automatically. Active
Control adjusts these picture settings continu-
ously and automatically.
Mode
Features
Timer
Autolock
É
É
É
Contrast +
Active Control
Off
Ñ
É
Press the MENU button on the remote
control to show the on-screen menu.
1
Press the CURSOR DOWN to highlight
Features.
6
1
5
3
5
2
Features
Press the CURSOR RIGHT to access the
Features menu.
Timer
Autolock
É
3
É
É
Press the CURSOR DOWN button until
the Active Control is highlighted.
Contrast +
2
4
Active Control
On
Ñ
É
4
Press the CURSOR RIGHT or LEFT to tog-
gle the On or Off option.
5
6
Press the STATUS/EXIT button to remove
the menu from the screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE FORMAT CONTROL
ou can change the screen format size to match
Ythe type of program you re watching.
4:3
For 23PF8946 and 17PF8946 models, select from
these format modes : normal 4:3, Zoom 14:9,
Zoom 14:9
Zoom 16:9, Subtitle Zoom, Super Zoom, or Fullscreen.
Press the FORMAT button repeatedly to
toggle the different format modes. You can
select from normal 4:3, Zoom 14:9, Zoom
16:9, Subtitle Zoom, Super Zoom, or
Fullscreen.
1
Zoom 16:9
1
1
NOTE : You can also access the different
formats modes via the CURSOR LEFT or
RIGHT button.
1
OR
Subtitle Zoom
OR
Super Zoom
OR
Widescreen
OR
Fullscreen
For 20PF8946 and 15PF8946 models, select from
these format modes : 4:3, Expand 4:3 or
Compress 16:9.
4:3
Expand 4:3
Press the FORMAT button repeated-
ly to toggle among the three screen for-
mat sizes; 4:3, EXPAND 4:3, or COM-
PRESS 16:9.
1
NOTE : You can also access the different
formats modes via the CURSOR UP or
DOWN button.
Compress 16:9
1
1
1
24
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE AUTO PICTURE™ CONTROL
hether you re watching a movie or a video
Wgame, your TV has automatic video control
settings that will match with your current program
source or content. AutoPicture™ quickly resets
your TV s video controls for a number of different
types of programs and viewing conditions that you
may have in your home. The Movies, Sports, Weak
Signal, and Multimedia AutoPicture™ controls
have been preset at the factory to automatically
adjust the TV s brightness, color, picture, sharp-
ness, tint, and color temperature levels. The
Personal AutoPicture™ settings are the ones that
you made through the PICTURE options within
the onscreen menu
Personal
Movies
Sports
Press the PICTURE button on the remote
control. The current AutoPictureTM setting
1
2
will appear in the middle of the screen.
1
2
Press the PICTURE button repeatedly to
select either Personal, Movies, Sports, Weak
Weak Signal
Multimedia
Signal, or Multimedia picture settings.
NOTE: The Personal setting and the Picture
options within the onscreen menu are the same.
This is the only option in AutoPictureTM that can be
changed. To adjust these settings, use the
Pictureoptions within the onscreen menu. All other
settings are set up at the factory during production
and cannot be adjusted.
HOW TO USE THE AUTO SOUND™ CONTROL
utoSound™ allows you to select from three
Afactory-set controls and a personal control
that you set according to your own preferences
through the onscreen Sound menu. The three fac-
tory-set controls (Voice, Music, and Theatre)
enable you to tailor the TV sound so as to
enhance the particular program you are watching.
Follow these steps to select any of the options.
Personal
Voice
Press the SOUND button on the remote
control. The current AutoSoundTM setting
1
2
will appear in the middle of the screen.
Press the SOUND button repeatedly to
toggle among the four settings: Personal,
Music
Voice, Music, or Theatre.
Remember, only the Personal control can be
changed by the viewer. This changes the settings
in the main onscreen menu s Sound controls
1
2
Theatre
HELPFUL HINT
AutoSoundTM works only with the programs
coming through the ANTENNA/CABLE
(ANT) input on the rear of the TV (RF
audio). It will not control the sound levels
for the external connections.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE FM MODE (FM RADIO)
MODE SELECT CONTROLS
Radio Menu
Picture
Sound
Features
Install
•
TV
É
he Mode options allow you to move to other operating
Tmodes within the TV. When in the FM Radio Mode,
choose from TV or VGA Modes.
•
FM Radio
VGA
HD
•
•
Radio Menu
Mode
If in the FM Radio mode, press the MENU but-
ton on the remote control to display the FM Radio
1 Mode onscreen menu.
Picture
Sound
Features
Install
•
TV
•
FM Radio
VGA
HD
•
•
É
Press the CURSOR DOWN button until Mode
Mode
is highlighted.
2
Press the CURSOR RIGHT button to access
the TV, VGA or HD mode.
3
5
6
1
3
Radio Menu
Press the CURSOR UP or DOWN buttons to
Picture
Sound
Features
Install
•
TV
choose TV, VGA, or HD.
4
•
•
•
FM Radio
VGA
HD
TV - This will switch the TV back to the TV Mode
of operation.
2
4
É
Mode
VGA - This control will switch the TV to the VGA
Mode of operation. Note a PC signal must be pres-
ent for this to work, or the TV will go into standby
mode.
Press the CURSOR RIGHT button to activate
the selected control and change to the highlighted
5 mode.
Press the STATUS/EXIT button to remove the
onscreen menu from the TV screen when finished.
6
INSTALL CONTROLS
his TV also provides you with an FM Radio. An FM
TRadio signal must be connected to the FM Antenna
75 ohm Jack located on the bottom of the.TV
Radio Menu
Picture
Sound
•
Language
•
Tuner Mode
Features
Install
•
•
Auto Program
Manual Program
Radio Menu
To enter the FM Mode, press the RADIO but-
ton on the remote control. The FM Mode has its
Mode
Language
Tuner Mode
Ñ
English
É
1
own onscreen menu options.
Auto Program
Manual Program
É
Press the MENU button on the remote control
to display the FM Mode onscreen menu.
2
É
Press the CURSOR RIGHT button on the remote
control to access the Install menu.
3
4
1
Install
Press the CURSOR UP or DOWN buttons to
scroll through the available Install options. These
options include: Language, Auto Program or
Manual Program.
LANGUAGE - Choose to view the onscreen
menu in English, French or Spanish.
6
Language
Tuner Mode
É
4
Auto Program
Manual Program
Ñ
Start ?
É
É
2
4
3
5
AUTO PROGRAM - The Auto Program control
will search the FM antenna signal and store any
FM channel it finds in the TV’s memory.
Install
Language
Tuner Mode
É
•
•
•
Search
MANUAL PROGRAM - This control will
allow you to manually tune any available FM
signals.
Program No.
Store?
Auto Program
É
É
Manual Program
Press the CURSOR RIGHT button to adjust
or select items within the highlighted feature
sub-menu.
5
6
Press the STATUS/EXIT button to remove the
onscreen menu from the TV screen when fin-
ished. Or, let the display time out and the menu
will disappear after a few seconds.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE FM MODE (FM RADIO)
FM RADIO TIMER CONTROLS
Radio Menu
our TV or FM Radio comes with an
Yonscreen clock. The FM Radio can also be
set to turn on or off at a specific time and
tune to a specific channel when it powers
itself on.
Picture
Sound
Timer
Features
Screen Saver
Features
Install
É
É
Timer
Time
Screen Saver
Start Time
Stop Time
Channel No.
Activate
Mode
Press the MENU button on the remote control to
show the onscreen menu.
1
Press the CURSOR DOWN button to highlight
Features.
Timer
2
É
Ñ
Time
Start Time
Stop Time
Channel No.
Activate
– – : – – PM
É
4
Press the CURSOR RIGHT button to enter the
Features menu.
É
É
É
É
6
3
Display
3
5
Press the CURSOR UP or CURSOR DOWN
button to highlight one of the Timer controls.
1
5
4
These controls are Time, Start Time, Stop
Time, Channel No., Activate, or Display.
Timer
2
Time
Start Time
Stop Time
Channel No.
Activate
É
Press the CURSOR RIGHT or CURSOR
– – : – – PM
É
Ñ
4
LEFT button to make adjustments or to toggle
É
5
É
É
É
the On or Off.
5
Display
5
Time : Enter the current time using the Numbered
buttons. Use the CURSOR LEFT or CURSOR
RIGHT buttons to toggle the AM and PM setting.
Timer
Start Time: Use the numbered buttons to enter
the time you want the channel to turn itself On.
Use the CURSOR RIGHT and CURSOR LEFT
buttons to toggle the AM and PM setting.
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
Ñ
– – : – – PM
É
É
É
Stop Time: Use the numbered buttons to enter
the time you want the TV to turn itself Off. Use
the CURSOR RIGHT and CURSOR LEFT but-
tons to toggle the AM and PM setting.
Display
Timer
Channel No. : Use the NUMBERED buttons or
the CH + or CH- buttons to enter the desired
start-up channel. You can also press the CUR-
SOR RIGHT or CURSOR LEFT buttons to
enter the desired start-up channel.
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
É
Ñ
8
É
É
Display
Activate: Set the timer to turn itself On (Once
or Daily) or Off. Press the CURSOR RIGHT
u
and CURSOR LEFT buttons to select Once,
Daily, or Off.
▼
Timer
Timer
Display: Press the CURSOR RIGHT or CUR-
SOR LEFT to toggle between On or Off. If On
is selected, the time will be displayed all the
time when the TV is on. When Off is selected,
the time will only appear when the
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
É
Time
Start Time
Stop Time
Channel No.
Activate
É
É
É
É
É
É
Ñ
Once
É
Ñ
Display
É
Display
On
É
STATUS/EXIT button is pressed.
Press the STATUS/EXIT button to remove the
menu from the screen.
6
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE FM MODE (FM RADIO)
FM RADIO SOUND CONTROLS
Radio Menu
Picture
Sound
Features
Install
Equaliser
Balance
AVL
o ensure the best sound quality from
T
the FM Radio feature of this TV, several
Sound Controls are available for
adjustment.
Dolby Virtual
SAP
Mode
Sound
Equalizer
Balance
AVL
É
É
É
É
120 Hz
500 Hz
1500 Hz
5 KHz
To enter the FM Mode, press the
RADIO button on the remote control.
The FM Mode has its own onscreen
Dolby Virtual
SAP
1
10 KHz
Sound
É
menu options.
1
4
Press the MENU button on the remote
control to display the FM Mode onscreen
menu.
7
Sound
2
3
4
Equalizer
Balance
AVL
É
0
2
6
É
É
Press the CURSOR DOWN button
until SOUND is highlighted.
4
6
Dolby Virtual
SAP
Sound
É
Press the CURSOR RIGHT button
to shift menu to the left, accessing the
SOUND onscreen menu options. These
options include : EQUALIZER,
BALANCE, AVL, DOLBY VIRTUAL
or SOUND.
3
Sound
5
Equalizer
Balance
AVL
É
É
Ñ
On
É
Dolby Virtual
SAP
É
É
Sound
Press the CURSOR UP or DOWN
button to select the sound options you
want to adjust.
5
6
▼
Sound
Sound
Press the CURSOR LEFT or RIGHT
button to adjust the selected sound control.
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
Ñ
É
Dolby Virtual
SAP
Dolby Virtual
Ñ
É
Dolby Virtual
SAP
Stereo
NOTE : If Equaliser is selected, press the
CURSOR RIGHT button to enter Equaliser
menu and press the CURSOR UP or
CURSOR DOWN button to select from
120Hz to 10KHz. Then press the CURSOR
LEFT or CURSOR RIGHT button to adjust
the selected control.
É
Sound
É
Sound
É
OR
▼
Sound
Sound
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
Press the STATUS/EXIT button to
exit the menu from the screen.
É
Ñ
Dolby Virtual
SAP
Spatial
Ñ
É
Dolby Virtual
SAP
Mono
OR
É
Sound
É
Sound
É
7
▼
Sound
Sound
Equalizer
Balance
AVL
É
Equalizer
Balance
AVL
É
É
É
É
É
É
É
Dolby Virtual
SAP
Dolby Virtual
SAP
OR
Ñ
É
Ñ
Sound
Stereo
É
É
Sound
Mono
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE FM MODE (FM RADIO)
SCREENSAVER CONTROL
Radio Menu
Picture
Sound
•
•
Timer
hile in the FM Mode, there is a Screensaver
Screen Saver
Woption that can be used. The Screensaver con-
Features
Features
Install
trol, when on, will circulate the screen station indica-
tion around the display.
Timer
É
Mode
Ñ
É
Screen Saver
Off
If in the FM mode, press the MENU button
on the remote control to display the FM
Mode onscreen menu.
1
Press the CURSOR DOWN button until
FEATURES is highlighted.
2
Press the CURSOR RIGHT button to shift
the menu to the left. TIMER will be high-
lighted.
Features
6
1
5
3
5
3
Timer
É
Ñ
É
Screen Saver
On
Press the CURSOR DOWN button until
SCREENSAVER is highlighted.
4
2
4
Press the CURSOR RIGHT or LEFT but-
ton to toggle the Screensaver control ON or
5
OFF.
With the Screensaver control set to ON, the
display will shift around the screen pausing in
one place for a brief moment.
Press the STATUS/EXIT button to remove
the onscreen menu from the TV screen when
finished. Or, let the display time out and the
menu will disappear after a few second.
6
AUTOSOUND™ CONTROLS
utoSound™ allows you to select from
Afour factory-set controls and a personal
control that you set according to your own
preferences through the onscreen Sound menu
within the FM Mode. The four factory-set
controls (Classical, Jazz Pop, or Rock) enable
you to tailor the sound so as to enhance the
particular program you are listening to.
Personal
Classical
If in the FM mode, press the AUTO
SOUND button on the remote control
to display the first AutoSound™option
on the screen.
Jazz
1
1
2
Press the AUTO SOUND button
repeatedly to toggle through the factory
pre-defined setting for the following
musical styles: CLASSICAL, JAZZ,
POP, ROCK or PERSONAL (the way
you set the equalizer).
2
Pop
Rock
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE VGA MODE
VGA PICTURE CONTROLS
VGA Menu
Picture
Audio Selection
Features
•
•
•
•
•
Brightness
Picture
o ensure the best picture quality from the VGA feature
of this TV, several Picture Controls are available for
adjustment. Note: Applicable to 15"/17"/23" models only.
VGA Menu
T
Horizontal
Vertical
Brightness
Picture
48
Reset to Factory
Mode
É
É
É
É
Color Temp
Horizontal
Vertical
Press the VGA button on the remote con-
Color Temp
trol to enter into VGA mode.
1
Press the MENU button on the remote con-
trol to display the Picture menu.
2
Press the CURSOR RIGHT button to
access the Picture menu.
VGA Menu
6
1
2
4
3
Brightness
Picture
É
38
Press the CURSOR UP or CURSOR
DOWN button repeatedly to select any of
the picture items:
Horizontal
Vertical
É
É
É
3
4
Color Temp
5
Brightness- adds or subtracts light from the
darkest part of the picture.
4
Picture- improves the detail of the lightest
parts of the picture.
VGA Menu
Brightness
Picture
É
É
Horizontal- Allows you to adjust the hori-
zontal placement of the image.
Horizontal
Vertical
39
É
É
Color Temp
Vertical- allows you to adjust the vertical
placement of the image.
Color Temp.- Allows you to adjust the color
temperature of the picture. Select from
Normal, Cool, or Warm.
VGA Menu
VGA Menu
▼
Once you have highlighted a selection, press
the CURSOR LEFT or CURSOR RIGHT
button to navigate, adjust, or activate the
specific controls.
Brightness
Picture
É
Brightness
Picture
É
É
É
É
É
É
5
Horizontal
Vertical
Horizontal
Vertical
32
Color Temp
Normal
É
Ñ
Color Temp
É
É
Press the STATUS/EXIT button to remove
the onscreen menu from the TV screen when
finished.
6
VGA AUDIO SELECTION
VGA Menu
VGA Menu
Picture
Audio Selection
Features
•
•
Brightness
Picture
his TV lets you choose the sound that is heard
Twhile in VGA Mode. You can select TV, VGA/HD
or FMRadio. For example, you can listen to the radio
while you use the computer.
NOTE: You must select the source before selecting
VGA. You cannot change the channel or station while
in VGA Mode. Applicable to 15"/17"/23" models only.
Picture
Audio Selection
Features
•
Horizontal
Vertical
FM Radio
É
Ñ
Reset to Factory
Mode
•
•
Color Temp.
Reset to Factory
Mode
VGA Menu
Press the MENU button on the remote
control to display onscreen menu.
Picture
Audio Selection
Features
1
TV
4
1
3
Ñ
É
Press the CURSOR DOWN button repeat-
edly to highlight Audio Selection.
Reset to Factory
Mode
3
2
2
Press the CURSOR LEFT or CURSOR
RIGHT button repeatedly to select FM
Radio, VGA/HD, or TV.
3
4
VGA Menu
Press the STATUS/EXIT button to remove
the onscreen menu from the TV screen when
finished.
Picture
Audio Selection
Features
É
VGA/HD
Ñ
Reset to Factory
Mode
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE VGA MODE
VGA FEATURES
Applicable to 15"/17"/23" models only.
VGA Menu
Picture
Audio Selection
Features
• Phase
Press the MENU button on the
remote control to display onscreen
menu.
• Clock
Features
1
2
• Format
• Auto Adjust
Reset to Factory
Mode
Phase
Clock
39
Press the CURSOR DOWN button
REPEATEDLY to highlight the
É
É
É
Format
FEATURES.
Auto Adjust
.
Press the CURSOR RIGHT button
to access the Features menu.
3
Press the CURSOR UP or CURSOR
DOWN buttons to access the items in
the Features menu:
Features
4
4
5
6
1
5
Phase
Clock
É
Phase - eliminates the horizontal inter-
fering lines
36
Format
É
É
3
Auto Adjust
Clock - eliminates the vertical interfer-
ing lines
5
Format - choose between Full Screen
and the original format (Native) of the
PC screen. NOTE : For 15PF8946 model,
there is only Native format.
2
4
5
Features
Phase
Clock
É
É
Auto Adjustment - automatically
adjusts the control based on the signal
being received to give the best possible
picture.
Format
Ñ
Native
É
Auto Adjust
É
Press the CURSOR LEFT or CUR-
SOR RIGHT button to make the
desired adjustments.
Note : For Auto Adjustment feature,
press the CURSOR LEFT to start
adjustment. When adjustment is
completed, press the CURSOR UP
or DOWN to select YES if you want
to store adjustment or select NO
if you do not want to store adjustment.
5
6
Features
Features
▼
Phase
Clock
É
É
É
Phase
Clock
É
É
É
Format
Format
Auto Adjust
Start?
Auto Adjust
In Progress . . .
É
Press the STATUS/EXIT button to
remove the menu from the screen.
Features
Phase
Clock
É
É
É
Format
▲
Auto Adjust
Store?
Ñ
No
▼
É
Yes
Features
Phase
Clock
É
É
Format
Ñ
Native
É
Auto Adjust
É
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE HD MODE (HIGH DEFINITION)
HD SELECT CONTROL
HD Menu
Picture
Sound
Features
Install
•
•
•
Brightness
Color
he HD Select Control will allow you to
Tquickly change from the HD Mode of oper-
ation to the TV, FM Radio, or VGA Modes.
Picture
Sharpness
Tint
•
•
HD Menu
Picture
Mode
•
TV
If in the HD Mode, press the MENU
Sound
Features
Install
•
•
•
FM Radio
VGA
button on the remote control to display
the HD Mode onscreen menu. The PIC-
TURE option will be highlighted.
1
HD
Mode
2
4
Press the CURSOR UP or CURSOR
DOWN button to highlight Mode.
HD Menu
2
Picture
•
TV
É
5
Sound
Features
Install
•
•
•
FM Radio
VGA
Press the CURSOR RIGHT button to
access the Mode menu.
3
HD
3
Mode
1
5
2
4
Press the CURSOR UP or CURSOR
DOWN button until the desired Mode
(TV, FM Radio. or VGA) is highlighted.
HD Menu
Picture
4
•
TV
Sound
Features
Install
•
•
•
FM Radio
VGA
É
HD
After you have highlighted the desired
Mode
mode is selected, press the CURSOR
RIGHT button to enter the sel.ected
Mode.
5
HD Menu
Picture
•
TV
Sound
Features
Install
•
•
•
FM Radio
VGA
NOTE : You can also press the dedicated button
on the remote control to change the Mode.
É
HD
Mode
SETTING UP THE HD MODE TIMER
he HD Mode Timer also allows you to set
T
to turn On or Off the HD channel at a
specific time and tune to a specific channel
when it powers itself on. The HD Mode Timer
operates in exactly the same way as the TV
Timer menu.
HD Menu
Picture
Sound
Timer
Features
Autolock
Contrast +
Features
Install
Timer
Autolock
Time
É
É
É
Start Time
Stop Time
Program No.
Activate
Mode
Contrast +
In the HD Mode, press the MENU
button on the remote control to display
the HD Mode onscreen menu.
1
2
3
Timer
Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
É
Ñ
Time
— — :— — PM
2
Start Time
Stop Time
Program No.
Activate
É
É
É
É
É
Press the CURSOR RIGHT button to
access the Features menu and press the
CURSOR RIGHT button again to enter
HD Mode Timer menu.
Display
3
2
1
Proceed to set the timer. Refer to page 10
and follow the steps in "How to Use the
4
Timer Controls" in TV mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE HD MODE (HIGH DEFINITION)
PICTURE CONTROLS
he HD Mode offers certain Picture, Sound
Tand Blocking options within its onscreen
menu. Below is a list of Picture Menu options.
HD Menu
Press the HD button on the remote control
Picture
Sound
Features
Install
Brightness
Color
to place the TV in the HD mode.
1
2
Picture
Sharpness
Tint
Press the MENU button on the remote
control to display the HD Mode onscreen
menu. The PICTURE option will be
highlighted.
Mode
Picture
Brightness
Color
48
É
É
É
É
É
Picture
Sharpness
Tint
Press the CURSOR RIGHT button to
Color Temp
enter the PICTURE menu. Brightness will be
highlighted.
3
1
4
Press the CURSOR UP or button CURSOR
Picture
6
2
5
DOWN to select the picture adjustment you want
to change : Brightness, Color, Picture,
Sharpness, Tint or Color Temp.
4
Brightness
Color
É
38
Picture
É
É
É
É
Sharpness
Tint
3
Color Temp
Press the CURSOR LEFT or RIGHT button
to adjust the selected control.
5
5
6
4
Press the STATUS/EXIT button when
finished to remove the menu from the screen..
Picture
Brightness
Color
É
É
Picture
42
Sharpness
Tint
É
É
É
Color Temp
INT
Picture
Brightness
Color
É
É
É
Picture
Sharpness
Tint
2
É
É
Color Temp
Picture
Brightness
Color
É
É
É
É
É
Picture
Sharpness
Tint
É
Ñ
Color Temp
Normal
arm will make the whites, reddish.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE HD MODE (HIGH DEFINITION)
SOUND CONTROLS
HD Menu
Picture
Sound
Features
Install
Equaliser
Balance
AVL
he HD Mode also offers certain Sound con-
Ttrol adjustments to fine tune the sound being
heard when in the HD Mode.
Dolby Virtual
SAP
Mode
Sound
Press the HD button on the remote control
to place the TV in the HD mode.
Equalizer
Balance
AVL
É
É
É
É
É
É
120 Hz
500 Hz
1500 Hz
5 KHz
1
2
Dolby Virtual
SAP
10 KHz
Press the MENU button on the remote
Sound
control to display the HD Mode onscreen
menu. The PICTURE option will be
highlighted.
1
5
4
6
3
5
7
2
6
Sound
Equalizer
Balance
AVL
É
Press the CURSOR DOWN until
Sound is highlighted.
0
É
É
É
É
Dolby Virtual
SAP
3
4
5
Sound
Press the CURSOR RIGHT button to
enter the Sound menu.
Sound
Press the CURSOR UP or button CURSOR
DOWN to select the any of the HD Mode
Sound Controls : Equalizer, Balance, AVL
or Dolby Virtual .
Equalizer
Balance
AVL
É
É
Ñ
On
É
Dolby Virtual
SAP
É
É
Sound
É
Press the CURSOR LEFT or RIGHT button
to adjust the selected control.
6
7
▼
Sound
Sound
Press the STATUS/EXIT button when
finished to remove the menu from the screen..
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
Ñ
É
Dolby Virtual
SAP
Dolby Virtual
Ñ
É
Dolby Virtual
SAP
Stereo
É
É
É
É
É
Sound
Sound
OR
▼
Sound
Sound
INT
Equalizer
Balance
AVL
É
É
É
Equalizer
Balance
AVL
É
É
É
É
Ñ
Dolby Virtual
SAP
Spatial
Ñ
É
Dolby Virtual
SAP
Mono
É
É
OR
É
É
É
Sound
Sound
(if Mono).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE HD MODE (HIGH DEFINITION)
LOCK HD CHANNEL/CHANGE CODE
he HD Mode channel can be blocked to
HD Menu
Features
Picture
Sound
Timer
Autolock
Contrast +
Timer
Autolock
Contrast +
É
É
T
censor the viewing of programming not
suitable for children. The HD Mode AutoLock
menu also allows you to change your AutoLock
Access Code. To block the HD Mode channel
and change code, follow the steps below
Features
Install
Mode
Features
Timer
Autolock
Contrast +
É
Access Code
— — — —
Press the MENU button on the
remote control to show the onscreen
menu.
É
Ñ
É
1
3
5
Press the CURSOR DOWN button to
highlight Features.
Features
13
2
8
Timer
Autolock
Contrast +
É
É
Access Code
É
Ñ
* * * *
10
Press the CURSOR RIGHT button
to display the Features menu.
Correct
3
1
2
4
7
9
Press the CURSOR DOWN button to
select the AutoLock™ control.
AutoLock
4
Block ChannelÉ
Ñ
Off
É
Press the CURSOR RIGHT button
again to highlight Access Code.
Lock HD
Change Code
Clear All
É
É
É
É
5
6
Block All
Enter your four-digit Access Code,
11
Movie Rating
“Correct” will briefly appear on the
screen and the AutoLock menu will be
accessible.
6
AutoLock
12
Block ChannelÉ
Ñ
On
É
Lock HD
Change Code
Clear All
É
É
É
É
Press the CURSOR DOWN button to
select Lock HD.
Block All
7
8
Movie Rating
Press the CURSOR RIGHT button
to select On to activate the blocking of
the HD channel. If On option is selected,
the HD channel will not allow viewing of
programs. This control would have to be
set to Off to make the viewable.
AutoLock
Block ChannelÉ
AutoLock
Block ChannelÉ
▼
Lock HD
Change Code
Clear All
É
É
É
É
É
Lock HD
Change Code
Clear All
É
É
É
É
É
New Code
– – – –
Block All
Block All
If you want to change your Access Code,
proceed to press the CURSOR DOWN
button and select Change Code .
Movie Rating
ÉMovie Rating
9
AutoLock
AutoLock
Press the CURSOR RIGHT button to
enter Change Code mode. "New Code ”
will appear.
Block ChannelÉ
Block ChannelÉ
10
▼
Lock HD
Change Code
Clear All
É
É
É
É
É
New Code
Lock HD
Change Code
Clear All
É
É
É
É
É
Confirm Code
– – – –
****
Block All
Block All
Enter a new four-digit code using the
number buttons. "Confirm Code ”
will then appear.
ÉMovie Rating
Movie Rating
11
Using the numbered buttons, re-enter
AutoLock
AutoLock
your new four-digit code to confirm.
Once message Confirmed appears, you
have changed to new code.
12
Block ChannelÉ
Block ChannelÉ
▼
Lock HD
Change Code
Clear All
É
É
É
É
É
Confirm Code
É
É
É
É
É
Lock HD
Change Code
Clear All
****
Confirmed
Block All
Block All
ÉMovie Rating
Movie Rating
Press the STATUS/EXIT button to
remove the menu from the screen.
13
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
No Power
S-VHS Color Becomes Faint
• Unplug socket for S-Video connection. Reconnect the S-Video
socket of the TV slowly to the VCR socket.
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
TV Only Produces MONO Sound
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
• If using a cable box with RF only type connections, the signal
coming from the cable box will be produced in MONO only.
• Check Sound control setting. Change setting to Stereo.
No Picture
• Check antenna/cable connections. Are they properly secured
Remote Does Not Work
• Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
• Clean the remote control and the remote control sensor win-
dow on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
to the TV's ANT 75P plug?
• Check the TUNER MODE control for the correct tuner set-
ting.
• Try running the Auto Program feature to find all available
channels.
• Press the SOURCE button on the remote to make sure the
correct signal source is selected.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
• If using an accessory device, be sure that it is functioning
properly.
• Check to be sure the TV outlet is not on a wall switch.
• Be sure that the remote is in the correct operating mode.
• Be sure the remote is pointed at the Remote Sensor Window
on the TV. See page 1 of the Quick Use Guide for details.
• If in PC Mode, a video signal MUST BE present or the TV
will turn off.
No Sound
• Check the VOLUME buttons.
TV Displays Wrong Channel or No Channels Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
• Check the MUTE button on the remote control.
• If you’re attempting to hook up auxiliary equipment, check
the audio jack connections.
• Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
No AV Signal
• Check whether AV and S-Video sockets connected
simultaneously. If they are, disconnect the S-Video socket.
AV signal automatically overrides the S-Video signal if
both sockets are connected simultaneously.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND CARE
WARNING Concerning Stationary Images on the TV
PLACEMENT OF THE TV
Screen:
• To avoid cabinet warping, cabinet color changes, and
increased chance of set failure, do not place the TV where
temperatures can become excessively hot; for example, in
direct sunlight or near a heating appliance.
Do not leave stationary or letterbox images on screen
for extended periods of time. This can cause uneven
display aging.
• Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Normal use of the TV should involve the showing of pictures
that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on
screen too frequently, because subtle ghost images can be left
on the picture tubes. Sources of stationary images may be DVD
disks, laser disks, video games, CD-i disks, videotapes, digital
television boxes, broadcast channels, cable channels, satellite
channels, and others. Here are some examples of stationary
images (this is not an all-inclusive list; you may encounter
others in your viewing):
CLEANING
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to
keep the TV clean.
• When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front
screen with a clean cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
• DVD menus—listings of DVD disk content
• Letterbox black bars—shown at the top and bottom of the
TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio.
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap
or detergent. Use a clean, dry cloth to dry the wiped surfaces.
Do not use acetone, toluene, or alcohol to clean the screen.
• Video-game images and scoreboards
• Television station logos—present a problem if they are
bright and stationary; moving or low-contrast graphics are
less likely to cause uneven aging of the picture tube
• Stock-market tickers—presented at the bottom of the TV
screen
• Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
• Never use thinners, insecticide sprays, or other chemicals on
or near the cabinet, as they might cause permanent marring
of the cabinet finish.
• Shopping channel logos and pricing displays—bright
and shown constantly or repeatedly in the same location on
the TV screen.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Understanding the AutoLock™ Control . . . . . . . . . . . . . . . .11
AutoSound™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
AutoPicture™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
AVL (Auto Volume Leveler) Control . . . . . . . . . . . . . . . . . . . .9
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Channel Edit (Add or Delete Channels) Control . . . . . . . . . .7
Closed Captioning Control . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Dolby Virtual Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Equalizer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Picture Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . . .8
Program List Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
FM Radio Mode Controls
AutoSound™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Install Menu Controls
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Manual Store Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Mode Select Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Screensaver Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sound Adjustment Controls
AVL (Auto Volume Leveler) Control . . . . . . . . . . . . . . . . . .28
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Equalizer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Dolby Virtual Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Stereo Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
SAP (Secondary Audio Programming) Control . . . . . . . . . . .9
Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Surf Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Timer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Screen Format Control . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .24
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Timer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
HD Mode Controls
. . . . . . . . . . . . . . . . . . . . . 35
Lock HD /Change Code Control
Mode Select Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Picture Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . .33
Sound Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . . .34
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
VGA Mode Controls
Audio Selection Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
VGA Feature Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Picture Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . .30
Registration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
TV Mode Controls
Active Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
AutoLock Controls
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Clear All Locked Channels . . . . . . . . . . . . . . . . . . . . . . . . . .15
Lock HD Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Review Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
38
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS LIMITED WARRANTY
One (1) Year Labor and Parts Repair
PHILIPS CONSUMER ELECTRONICS warrants this
product against defect in material or workmanship, subject to
any conditions set forth as follows:
CARRY-IN / SHIP-IN WARRANTY
For Carry-In warranty repair, take the product to a Philips
authorized service center for repair. When the product has
been repaired, you must pick up the unit at the center.
For Ship-In warranty repair, ship the product to a Philips
authorized service center for repair in its original carton and
packing material. If you do not have the original carton or pack-
PROOF OF PURCHASE:
You must have proof of the date of purchase to receive war-
ranted repair on the product. A sales receipt or other docu-
ment showing the product and the date that you purchased the ing material, have your product professionally packed for ship-
product as well as the authorized retailer included, is consid-
ered such proof.
ping. Ship product via a traceable carrier. When it is necessary
for you to ship the product to Philips for repair, you will pay
the shipping cost for shipment to Philips. Philips will pay the
shipping costs when returning the product to you.
COVERAGE:
(If this product is determined to be defective)
TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
LABOR: For a period of one (1) year from the date of pur-
chase, Philips will repair or replace the product, at its option, at Contact Philips Customer Care Center at:
no charge, or pay the labor charges to any Philips authorized
repair facility. After the period of one (1) year, Philips will no
longer be responsible for charges incurred.
1-800-531-0039
TO OBTAIN WARRANTY SERVICE IN CANADA…
1-800-661-6162 (French Speaking)
PARTS: For a period of one (1) year from the date of purchase,
Philips will supply, at no charge, new or rebuilt replacement
parts in exchange for defective parts, through a Philips author-
ized service center.
1-800-531-0039 (English or Spanish Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
Note: If Philips is unable to provide service in your area, receipt TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
of the paid service can be submitted for consideration of adjust- ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
ment or full reimbursement at Philips discretion.
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICA-
BLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILI-
TY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Labor charges for installation or setup of the product, adjust- OF THIS WARRANTY.
ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
Some states do not allow the exclusions or limitation of inci-
• Product repair and/or part replacement because of improper dental or consequential damages, or allow limitations on how
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause exclusions may not apply to you. In addition, if you enter into a
not within the control of Philips. service contract agreement with the PHILIPS partnership within
• A product that requires modification or adaptation to enable ninety (90) days of the date of sale, the limitation on how long
long an implied warranty lasts, so the above limitations or
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifica-
tions.
an implied warranty lasts does not apply.
• Damage occurring to product during shipping when improp-
erly packaged or cost associated with packaging
• Product lost in shipment and no signature verification of
receipt can be provided.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Products sold AS IS or RENEWED.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6585E001 / 01-04
39
Download from Www.Somanuals.com. All Manuals Search And Download.
|