DVAA Series Disk Array
for DVR1 Series
DigitalVideo Recorder
Eng
Philips
Communication,
Security & Imaging
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Installation.......................................................................3
1.1
1.2
1.3
1.4
1.5
1.6
1.7
Product Description........................................................................................3
Unpacking........................................................................................................3
Installation Environment................................................................................3
Rear Panel Diagram.......................................................................................4
Connections.....................................................................................................4
Power-Up.........................................................................................................5
Front Panel Indicators....................................................................................5
2
DVAA/DVR1 Installation ................................................7
2.1
2.2
2.3
Connecting to the DVR1................................................................................7
Configuring the DVR1....................................................................................7
DVR1 Archiving Limitations:.........................................................................7
3
Adding Hard Drives ........................................................8
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Opening The DVAA........................................................................................8
Identifying The Components.........................................................................8
Mounting The Hard Drives ............................................................................9
Configuring Master/Slave ..............................................................................9
Connecting Hard Drives...............................................................................10
Powering Hard Drives..................................................................................10
Compatible Hard Drives...............................................................................11
4
5
Warranty.........................................................................12
Factory Service.............................................................12
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.1Product Description
The DVAA is a large, economical, hard drive based storage/archive device. It is
available with 4 hard disk drives (model DVAA0412) or 8 hard disk drives (model
DVAA0812). The DVAA0412 unit can later be repopulated with additional hard
drives.
1.2Unpacking
Check the package and contents for visible damage. If any components are
damaged or missing, do not attempt to use the unit. Contact the supplier
immediately. If the unit must be returned, it must be shipped in the original
packaging.
Package Contents
·
·
The DVAA unit.
US & EU Power Cables.
·
SCSI cable (Part No. CDW138264)
This Installation Guide
•
·
·
IDE Hard Drive Power Cables (Not provided with the DVAA0812)
IDE Hard Drive Ribbon cables (Not provided with the DVAA0812)
Hard Drive Fastening Screws. (Not provided with the DVAA0812)
·
1.3Installation Environment
Power: Ensure that the site’s AC power is stable and within the rated voltage of
the disk array. If the site’s AC power is likely to have spikes or dips, use power
line conditioning or an Uninterruptable Power Supply.
Ventilation: Ensure that the location is well ventilated. Do not obstruct the
cooling vents or fans.
Temperature: Insure the ambient temperature is within 0 to 40o Centigrade (32 o
to 104 o Fahrenheit).
Do not install this unit on top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4Rear Panel Diagram
1
2
3
4
5
6
7
8
Rear Panel Elements
1. Cooling Fan: Do not obstruct.
2. Power Connector, Voltage Selector and On/Off Switch
3. IEEE-1394 Firewire Ports 1 and 2*
4. 10/100 Ethernet Port*
5. SCSI Ports 1 and 2
6. Dip Switches*
7. RS-232 Port
8. Alarm Out Relay Connection*
1.5Connections
NOTE:
* The Ethernet, Aux dip switch, Alarm output and IEEE-1394 Firewire ports are
reserved for future upgrade.
SCSI Ports 1 and 2
Connect to either SCSI port. Using
the dip switches on the rear of the
unit, set SCSI Termination and
SCSI Power to On.
Connector: 50 pin, high density SCSI-2.
Gender (on unit): Female.
SCSI ID: 0.
The unit does not currently support multiple SCSI device connections.
RS-232 Port
The RS-232 port is used for flash
upgrading the DVAA operating
system software.
Connector Type: DB-9.
Gender (on unit): Male.
Cable Required: Null Modem.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DB-9 Pin Configuration For RS-232 Port
Pin
Use
Pin
Use
Not Connected
RTS
1
DCD
6
2
RX
7
3
TX
8
CTS
4
Not Connected
Ground
9
Not Connected
5
1.6Power-Up
Select the correct voltage before supplying power to
the unit.
Use the voltage selector switch located on the rear panel
of the unit, between the power connector and the On/Off
Switch.
Caution: Applying incorrect voltage could damage unit.
Once the correct voltage has been selected and all
connections have been made, apply power to the unit.
1.7Front Panel Indicators
Dis k Arra y
HARDDRIVESTATUS
P
OWER
1
2
3
4
5
6
7
8
LINK
READ
WRITE
1
0
0
ACTIVITY
ETHERNET
Hard Drive Status Indicators (Green Lights)
Light On: Drive present and operating.
Light Flashing: Drive present, error detected.
Light Off: No drive present, or drive damaged beyond recognition.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive Activity Indicators (Red Lights)
The light blinks when the drive is being accessed (read or write).
Ethernet Indicators
Reserved for future use.
LCD Display
Once power-up is complete, the LCD will display the total disk storage capacity
of the unit.
Key Pad
Reserved for future use.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2 DVAA/DVR1 Installation
The Philips DVAA Disk Array is only compatible with the DVR1 series
digital video recorder.
2.1 Connecting to the DVR1
1) Connect the SCSI cable from the DVR1 to the DVAA series
disk array.
2) Apply Power to the DVAA and wait 20 seconds
3) Apply Power to the DVR1
2.2 Configuring the DVR1
1) Configure the DVR1 Background Archive to ON (ARCHIVE
SETUP > BACKGROUND ARCHIVE > ON)
2) Configure the DVR1 Archiving Overwrite mode for
Continuous Overwrite (ARCHIVE SETUP > ARCHIVE
OVERWRITE MODE > CONTINUOUS OVERWRITE)
·
Note: The Disk Array does not support the other Overwrite
Modes.
Optional:
3) Configure the Archive status to ON (DISPLAY SETTINGS >
ARCHIVE STATUS > ON). This will display “Archive Not
Connected” if the Archive Device is not communicating or
working properly.
2.3 DVR1 Archiving Limitations:
1. The DVR1 cannot Background archive images greater than
20 ips (NTSC) 17 ips (PAL). The DVR1 can selectively
archive video recorded at any speed.
2. The DVR1 cannot properly playback video at speeds greater
than 20 IPS (NTSC), 17 IPS (PAL). It is recommended to first
restore the video to the DVR1’s hard drive (ARCHIVE SETUP
> RESTORE FROM ARCHIVE).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Before restoring archive data from the disk array (searching
the disk array’s indexes), the DVR1 must stop recording.
3 Adding Hard Drives
This section is required if your unit was shipped without hard drives installed, or if
the user needs to replace a faulty drive.
Caution: Do not allow any metal object to contact the motherboard. Do not
allow loose screws to become lost inside the DVAA chassis. Wear an Electro
Static Discharge protection device any time work is being performed inside the
unit.
3.1Opening The DVAA
Before removing the cover, turn off the unit and unplug it. Using a Phillips -head
screwdriver, carefully remove the twelve screws fastening the lid to the chassis.
Save the screws and use them to refasten the lid when finished.
3.2Identifying The Components
Complete Internal Overview
Power
Supply
Mother
Board
Disk
Array
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Motherboard Overview
Power
Supply
Load
Resistors
Jumpers
IDE
Connectors
IDE Power
Connectors
3.3Mounting The Hard Drives
First remove the hard drive support bracket. Orient the hard drive so that the IDE
Power Connector is near the bottom of the chassis and facing the motherboard.
Populate the drive array in order, starting from the left.
Fasten the drive in place using the supplied screws. Fasten each drive using two
screws through the bottom of the chassis. Attach the Hard Drive Support
Bracket then fasten the hard drives to the bracket using the screws.
3.4Configuring Master/Slave
Hard drives are connected in pairs to
IDE Connector #1
IDE Connector #3
each of the four IDE connectors. Each
pair of hard drives must have a Master
and a Slave. Configure the
IDE Connector #2
IDE Connector #4
Master/Slave setting on each hard
drive individually using the jumpers
provided with the drive. Use the
diagram located on the hard drive to
determine the proper jumper
configuration.
If a single drive is connected to an IDE
connector, it must be configured as a
Master.
When configuring the jumpers on the hard drive, select 16 Heads, Master or
Slave.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5Connecting Hard Drives
Use an IDE cable to connect drives as shown in the previous diagram. When
attaching the IDE connector, make sure the connectors are oriented properly.
Connecting To The Motherboard
The red stripe on the connection ribbon
should connect nearest the Pin 1 indicator
on the motherboard.
Pin 1
Indicator
Connecting To The Hard Drive
The red stripe on the connection ribbon
should connect near the jumpers on the hard
drive.
Pin 1 Near
Jumpers
3.6Powering Hard Drives
Connect the hard
Mother Board
drives as shown in
the diagram.
Power Supply
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7Compatible Hard Drives
The following is a list of hard drives that are compatible with the DVAA series
disk array.
Maxtor Drives
Model
Vulcan
Vulcan
Romulus
Galaxy
Galaxy
Part Number
4W030H2
4W100H2
4D120J6
Size
30GB
100GB
120 GB
40GB
80GB
4K040H2
4K080H2
IBM Drives
Model
Part Number
Size
IBM
IBM
07N3925
07N3935
30GB
75GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Warranty
This product offers a 3year warranty. The warranty does not cover hard
drives not installed by the factory and does not cover damages that may
occur due to improper hard drive installation.
5 Factory Service
Refer all Service to qualified personnel.
Contact the local Philips representative for service.
Service Centers:
USA: Ph: 800-366-2283
Central & S. America: 805-967-7917 (fax: 800-366-1329)
Canada: 514-738-2434 (fax: 514-738-8480)
Europe and Asia: 011-32-1-440-0711 (fax: 011-32-1-442-7054)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3935 890 41711 02-19
© 2002 by Bosch Security Systems, Inc.
All Rights Reserved. Philips ® is a registered trademark of
Philips Electronics N. A. Corp.
Data subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
|