DVD Player with Progressive
Scan Output
PC (Monitor)
/ Headphone
Press the AV+ button on the remote control
then press CURSOR V (down) to select SIDE/
SVHS.
Connect the VCR to the TV using
the S-Video cable.
Connect the 2 antenna cables for VCR
Recording. After connecting all cables and
devices switch on your TV.
Connect the Video cable from the Video output
on your camera or game console to the video
input located on the side of your TV. Connect the
left (white) and right (red) audio cables for sound.
Connect the Monitor (video) output
on the PC to the HDMI/PC-D
Input of the TV using a HDMI to
DVI cable.
After connecting all cables and
devices switch on your TV.
Connect the DVD to the TV using
Component Video cable.
Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.
Note : For headphone connection, please insert
the plug into the headphone socket as shown.
Press AV+ button on the remote control, then
press CURSOR V (down)repeatedly to select
SIDE/SVHS.
Press the AV+ button on the
remote control then press
CURSOR V (down) to select
PC-D.
Connect the audio output on the
PC to the PC AUDIO In of the
TV using an audio cable as shown.
Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-1
(HD/SD).
TV side
connectors
TV rear connector
Composite
Audio / Video
(SIDE)
TV rear
connectors
OUT
PC-D input
SERV U
Progressive
Scan Input
(CVI-1 SD/HD)
Add for VCR
recording
TV side
AV OUT
connectors
TV rear connector
OUT
PC (Monitor)
SERV U
Add for VCR
recording
See DVD Recorder / Player
Other possible connections for DVD Player with Progressive Scan Output
Progressive Scan Input via
HDMI
VGA (CVI-2 SD/HD)
See HD Receiver
See DVD Recorder / Player
programing
HD Receiver
1 When the TV is powered-on for the first time you will have to auto program the TV in
order to receive the channels that are broacasted locally.
Connect the 2 antenna cables for
VCR Recording. After connecting all
cables and devices switch on your TV.
Connect the antenna cables for
Connect the Monitor (video) output
on the PC to the PC-VGA/CVI-2
Input of the TV using a VGA
cable.
After connecting all cables and
devices switch on your TV.
Connect the VCR to the TV using
Video cable (yellow).
recording on your HD receiver.
After connecting all cables and
devices switch on your TV.
Connect the component video jacks
from the HD receiver to the HDMI
/ PC-D of the TV using a HDMI
cable.
2 Press the MENU button on the remote control to show the onscreen menu.
3 Press the CURSOR DOWN button repeatedly until Install is highlighted.
4 Press the CURSOR RIGHT button to enter the Install menu. Language will be highlighted.
Press AV+ button on the remote
control, then press CURSOR V
(down) until select AV/SVHS.
Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select HDMI.
Press the AV+ button on the
remote control then press
CURSOR V (down) to select
PC-VGA.
Connect the audio output on the
PC to the PC AUDIO In of the
TV using an audio cable.
5 Press the CURSOR DOWN button repeatedly until Auto Program is selected. “Start ?”
Add for VCR
recording
will appear.
TV rear connector
TV rear connector
6 Press the CURSOR RIGHT button to start the Auto Programing process.
OUT
7 Press the STATUS/EXIT button to remove the menu from the screen when the Auto
programing process has finished.
SERV U
Composite
VGA
Audio / Video
(AV)
Add for VCR
recording
Add for
recording
VIDEO
OUT
AUDIO
OUT
AUDIO
DIGITAL
AUDIO OUT
L
Y
PB
PR
L
TV rear connector
VCR
CONTROL
CH 3
CH 4
OUT TO TV
HDMI OUT
R
SERV U
PC (Monitor)
VIDEO
in 2
VIDEO
in 1
IN FROM ANT
S-VIDEO
SATELLITE IN
HD receiver
Add for
recording
Other possible connections for VCR
Other possible connections for HD receiver
See Set-Top Box
Progressive Scan Input
(CVI-1 SD/HD)
Progressive Scan Input via
VGA (CVI-2 SD/HD)
See DVD Player with
Progressive Scan Output
See DVD Recorder / Player
42PF7321
32PF5321
26PF5321
x 1
x 1
x 1
FOR VESA MOUNTING
(NOT INCLUDED)
x 3
Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.
Connect the DVD to the TV using
Component Video cable.
VESA
100mm
100mm
Í
26PF5321
100mm
After connecting all cables and
devices switch on your TV.
Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-1
(HD/SD).
x 1
VESA
VESA
Component
Video Input
(CVI)
S-Video
(SVHS)
Composite
Audio / Video
(AV or SIDE)
x 1
x 4
Í
42PF7321 800 x 400 mm
Tune in the TV the same
channel selected in the Set-Top
Box.
Connect the Set-Top Box to
the TV using an antenna cable.
100mm
100mm
100mm
Í
32PF5321
x 1
x 6
It can be also used to connect a
PC via DVI connector.
x 2
connection from your AV
equipment.
x 2
B
Please handle with
care. Use only the
soft cloth provided,
to clean the glossy,
B
FOR WALL MOUNTING
(INCLUDED ONLY FOR 42PF7321)
Signal input Cable from
1
the Cable Provider
B
OUT
black front of the TV.
Progressive Scan input
(CVI-1 SD/HD)
Component
Video Input
(CVI-1 SD/HD)
VGA (PC-VGA or
Provide superior picture quality
when using a Progressive Scan
signal in HD mode via Y-Pb-Pr
connector.
CVI-2 SD/HD)
Connect to your PC via VGA
connector. It can be also used
to connect a Progressive Scan
device (using the YPbPr-VGA
adapter)
OUTPUT CH
A
B
26PF5321
B
2
4
1249
415
TV rear connector
A
A
TV rear connector
A
3
SERV U
A
4
SERV U
Please be aware that the side Audio/Video
connectors are difficult to access and use
when connecting standard cables.
B
B
Tighten
B
32PF5321
Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.
Connect the DVD to the TV
using YPbPr - VGA adapter.
After connecting all cables and
devices, switch on your TV.
For sound connect the left (white) and
right (red) audio cables to the left
(white) and right (red) audio input of
your TV (PC AUDIO IN).
Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-2
(SD/HD).
Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select
AV/SVHS.
Connect the Set-Top Box to the
TV using Composite Video (AV)
plug into their corresponding
jacks.
After connecting all cables
and devices, plug in the power
and switch on your TV.
A
Signal input Cable from
the Cable Provider
programing
Please be aware that the side Audio/Video
connectors are difficult to access and use
when connecting standard cables.
OUT
OUT
Composite
Audio / Video
(AV)
26PF5321
32PF5321
42PF7321
TV rear connector
Component Video
Input via VGA
(CVI-2 SD/HD)
42PF7321
A
TV rear connector
CAUTION : This is a
Class 1 apparatus. It
B
TV rear connector
SERV U
must be connected to a
MAINS socket out with
a protective earthing
connection.
C
SERV U
B
C
S-Video (SVHS)
Composite
Audio/Video (AV)
S-Video (SVHS)
Component Video
Input (CVI)
Please be aware that when you mount
your TV on the wall using the key hole
system, the side Audio/Video connectors
are difficult to access and use when
connecting standard cables.
See DVD Recorder/Player
Turn your page to see other connections.
Download from Www.Somanuals.com. All Manuals Search And Download.
|