Philips DVD Player BDP3010 User Manual

Register your product and get support at  
Register your product and get support at  
BDP3B0D10P/5F0710  
BDP3010/F8  
EN  
ES  
FR  
EN User manual  
ES Manual del usuario  
FR Manuel de l’Utilisateur  
EN: For further assistance, call the customer support service in your country.  
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips  
Customer Care Center at 1-866-309-0866  
To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00  
ES:Para obtener más información, llame al servicio de soporte al cliente de su país.  
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los  
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0866  
Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo  
Para México.  
FR:Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de  
votre pays.  
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,  
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0866  
Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à  
01 800 504 62 00  
© 2009 P&F USA, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.  
EN  
LASER SAFETY  
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this  
apparatus, due to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates  
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing  
or climbing on it. A falling unit can cause serious injury or even death.  
To Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the AC power cord with wet hands.  
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is  
placed too close to them. In this case, please ensure enough space between the external devices and the unit.  
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.  
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few  
hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Note about Recycling  
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
Notice for Progressive Scan Output  
• Consumers should note that not all high definition television sets are fully compatible with this product and may  
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,  
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions  
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.  
Products that have earned ENERGY STAR®  
through superior energy efficiency.  
are designed to protect the environment  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
Maintenance  
Servicing  
Trademark Information  
Manufactured under license  
from Dolby Laboratories.  
“Dolby” and the double-D  
symbol are trademarks of  
Dolby Laboratories.  
• Please refer to relevant topics on “TROUBLESHOOTING”  
on page 46 before returning the product.  
• If you need to call a customer service representative,  
please know the model number and serial number of  
your product before you call. This information is  
displayed on the back of the product. Also, please take a  
moment to identify the problem you are having, and be  
prepared to explain this to the representative. If you  
believe the representative will need to help you with  
operations, please stay near the product. Our  
representatives will be happy to assist you. For online  
reference, please visit our web site at  
Manufactured under license  
under U.S. Patent #’s:  
5,451,942; 5,956,674;  
5,974,380; 5,978,762;  
6,487,535 & other U.S. and  
worldwide patents issued &  
pending. DTS is a registered  
trademark and the DTS logos,  
Symbol, DTS-HD and DTS-HD  
Advanced Digital Out are  
trademarks of DTS, Inc. ©  
1996-2008 DTS, Inc. All Rights  
Reserved.  
Cleaning the cabinet  
• Wipe the front panel and other exterior surfaces of the  
unit with a soft cloth.  
• Never use a solvent, thinner, benzene or alcohol to clean  
the unit. Do not spray insecticide liquid near the unit.  
Such chemicals may discolor the surface or damage the  
unit.  
Cleaning discs  
• When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center to out. Do not wipe in a  
circular motion.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for analog  
records.  
HDMI, the HDMI Logo, and  
High-Definition Multimedia  
Interface are trademarks or  
registered trademarks of  
HDMI Licensing LLC in the  
United States and other  
countries.  
Java and all other Java  
trademarks and logos are  
trademarks or registered  
trademarks of Sun  
Microsystems, Inc. in the  
United States and/or other  
countries.  
Cleaning the disc lens  
• If this unit still does not perform properly although you  
refer to the relevant sections and to “TROUBLESHOOTING”  
in this user manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an Authorized Service Center  
for inspection and cleaning of the laser optical pickup  
unit.  
“BONUSVIEW” is trademark of  
Blu-ray Disc Association.  
Disc handling  
• Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is not  
used.  
“BD-LIVE” logo is trademark  
of Blu-ray Disc Association.  
• Note that discs with special shapes (heart-shaped discs,  
octagonal discs, etc.) cannot be played back on this unit.  
Do not attempt to play such discs, as they may damage  
the unit.  
“Blu-ray Disc” and  
are trademarks.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Supplied Accessories  
User Manual  
is trademark of Eastman Kodak Company.  
remote control  
with batteries  
(AAAx2)  
User Manual  
Quick Start  
Guide  
registration card  
RCA audio /  
video cables  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
EN  
Introduction  
Function Setup  
Others  
Connections  
Basic Setup  
Playback  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Watch movies in the highest picture quality available for your HDTV. The BDP3010 Blu-ray Disc player offers full high-definition  
video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness  
delivers a more true-to-life picture.  
Pop-up menu  
Features  
Some BD-videos have a pop-up menu which is a navigation  
menu that can be called up and be operated on the TV screen  
Blu-ray Disc  
without interrupting the playback. You can call up the pop-up  
menu by pressing [DISC MENU / POP-UP MENU]. Contents in  
the pop-up menu vary depending on the disc.  
You can enjoy Blu-ray Disc which is capable of storing five  
times more data than a conventional DVD.  
BD-Java  
HDMI Deep Color  
With some BDs which support Java applications, you can  
enjoy the interactive functions such as games or interactive  
menus.  
Deep Color reduces the posterization effect of the playback  
image. Refer to “HDMI Deep Color” in the “LIST OF SETTINGS”  
on page 32.  
Upscale DVD for enhanced picture quality  
HDMI 1080p/24 output (BD only)  
Your current DVD will look even better than before thanks to  
video upscaling. Upscaling will increase the resolution of  
standard definition DVD to high definition up to 1080p over  
an HDMI connection. The picture will be less jagged and more  
realistic for a near high definition experience.  
This unit is equipped with the feature which can provide the  
smooth movement in the playback of film originated material with  
the frame rate of 24 frames per second with progressive. (Available  
only when the display device is connected by an HDMI cable.)  
Refer to “HDMI 1080p/24” in the “LIST OF SETTINGS” on  
.
Enjoy your content on different kinds of media  
Full backwards compatibility with DVD, CD and SD card  
ensures that you can continue to enjoy your current audio-  
video collection. Additionally, you can view JPEG digital  
pictures.  
Playing back the contents in SD Memory Card  
You can play back JPEGs stored in an SD Memory Card. You can  
store picture-in-picture commentary, subtitles or other extras for  
BD-ROM ver. 2 (Profile 2.0 / Profile 1.1) files in an SD Memory Card  
and play back with the BD-video.  
Listen to the rich multi-channel surround sound  
Multi-channel surround sound, which realizes real-to-life  
sound and makes you feel that you are really there.  
Product Info  
Intuitive user interface and remote control  
The Philips logical user interface allows you to easily navigate  
through your content and settings, so you can quickly find  
what you are looking for.  
“Product Info” screen provides you with the information  
on this unit’s hardware and software version information.  
You can also download the latest firmware from the web  
site which is displayed in the “Product Info” screen, and  
update the firmware by yourself.  
To access “Product Info”, select “Product Info” in the home  
menu.  
Easy and simple connection to your HDTV via HDMI  
Connect your BDP3010 to your HDTV with one single HDMI  
(High Definition Multimedia Interface) cable. Philips  
recommends HDMI1.3 (category 2) cable (also known as High  
Speed HDMI cable) for better compatibility. The high definition  
video output signal will be transferred to your HDTV without  
conversion to analog signals, so you will get an excellent  
picture and sound quality, completely free from noise.  
Thanks to other multiple outputs, you can also easily connect  
to your home theater system or amplifier.  
Symbols Used in this User Manual  
To specify for which media type each function is, we put the  
following symbols at the beginning of each item to operate.  
About EasyLink (HDMI CEC) (Consumer Electronics  
Control)  
Symbol Description  
EasyLink (HDMI CEC) allows you to operate the linked  
functions of this player with Philips brand TV with EasyLink  
feature.  
Philips does not guarantee 100 % interoperability with other  
brands of HDMI CEC compliant devices.  
Description refers to BD-video  
Description refers to DVD-video  
Description refers to audio CD / DTS-CD  
PiP (BONUSVIEW)  
Description refers to BD-RE/-R, DVD-RW/-R,  
CD-RW/-R and SD card with JPEG files  
Some BD-videos have the PiP function which enables you to  
display the secondary video in the primary video. You can call  
up the secondary video by pressing [BONUSVIEW (PiP)]  
whenever the scene contains the secondary video.  
If you do not find any of the symbols listed above under the  
function heading, the operation is applicable to all media.  
BD-Live  
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive  
functions to be used when this unit is connected to the  
Internet in addition to the BONUSVIEW function. The various  
functions differ depending on the disc.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
FUNCTIONAL OVERVIEW  
Front Panel  
EN  
1
2*  
3
4
5
6*  
7
8
* The unit can also be turned on by pressing these buttons.  
1. Disc tray  
6. B (play) button*  
• Press to start or resume playback.  
7. Q (standby-on) button  
• Place a disc when opening the disc tray.  
2. A (open/close) button*  
• Press to open or close the disc tray.  
3. Infrared sensor window  
• Receive signals from your remote control so that you  
can control the unit from a distance.  
4. Display  
• Press to turn on the unit, or to turn the unit into the  
standby mode. (To completely turn off the unit, you  
must unplug the AC power cord.)  
• Press and hold for 10 seconds to shut down the unit.  
• This button lights up in red when the unit is in  
standby mode and turns off when the power is on.  
8. SD card slot  
5. C (stop) button  
• Insert an SD Memory Card and play back the  
contents in it.  
• Press to stop playback.  
Rear Panel  
2
3
4
5
1
Y
P
R/CR  
B/CB  
L
HDMI OUT  
P
LAN  
COAXIAL  
R
DIGITAL OUT  
AUDIO  
OUT  
VIDEO  
OUT  
COMPONENT  
VIDEO OUT  
PCM/BITSTREAM  
6
7
1. AC power cord  
5. COMPONENT VIDEO OUT jacks  
• Connect to a standard AC outlet to supply power to  
• Use to connect a TV monitor with component video  
inputs with an RCA component video cable.  
6. DIGITAL OUT (COAXIAL) jack  
this unit.  
• Unplug this cord from the AC outlet to completely  
turn off the unit.  
2. LAN terminal  
• Use to connect an AV receiver / amplifier, Dolby  
Digital / DTS decoder or other device with a digital  
audio coaxial input jack with a digital audio coaxial  
cable.  
• Use to connect a telecommunications equipment  
with LAN cable.  
3. HDMI OUT jack  
• Use to connect to a display with an HDMI compatible  
port with an HDMI cable.  
4. AUDIO OUT jacks  
7. VIDEO OUT jack  
• Use to connect a TV monitor, an AV receiver /  
amplifier or other device with an RCA video cable.  
• Use to connect a TV monitor, an AV receiver /  
amplifier or other device with an RCA audio cable.  
Note  
• Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
• This unit does not have the RF modulator.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
FUNCTIONAL OVERVIEW  
Remote Control  
10. B (play) button*  
• Press to start playback or resume playback.  
11. S (previous) button  
1
2
3
29  
28  
• During playback, press once to return to the  
beginning of the current title, chapter, track or file.  
• During the JPEG playback, press to return to the  
previous file.  
• During playback, press twice to return to the  
previous title, chapter, track or file.  
4
5
6
27  
7
12. E (reverse) button  
• During playback, press to fast reverse the playback.  
13. C (stop) button  
8
9
10*  
11  
• Press to stop playback.  
26  
25  
24  
14.  
؀
 /
؁
 (volume) button  
• Press to adjust the TV volume (only applicable to  
the PHILIPS brand TV).  
12  
13  
23  
22  
15. A (open/close) button*  
• Press to open or close the disc tray.  
16. Number buttons  
21  
14  
• Press to select a chapter during playback.  
• Press to enter values in the input field.  
17. SUBTITLE button  
15*  
16  
• Press to select subtitles on a disc.  
18. ANGLE button  
17  
18  
20  
19  
• Press to select camera angles on a disc.  
• Press to rotate a picture (JPEG).  
19. HDMI button  
• Press to set the HDMI output mode.  
20. AUDIO button  
• Press to select the audio channel (such as audio  
languages) on a disc.  
21. TV CH
؀
 /
؁
 buttons  
* The unit can also be turned on by pressing these buttons.  
1. Q (standby-on) button  
• Press to change the channel up and down (only  
applicable to the PHILIPS brand TV).  
22. d (mute) button  
• Press to mute the TV volume (only applicable to the  
PHILIPS brand TV).  
23. D (forward) button  
• Press to turn on the unit, or to turn the unit into the  
standby mode. (To completely turn off the unit, you  
must unplug the AC power cord.)  
2. BONUSVIEW (PiP) button  
• Press to switch picture in picture feature on/off  
(only applicable to BD-video which supports the PiP  
(BONUSVIEW) function).  
• During playback, press to fast forward the playback.  
• When playback is in pause, press to slow forward  
the playback.  
3. ZOOM button  
• Press to enlarge the picture on the TV screen.  
4. RED / GREEN / BLUE / YELLOW button  
24. T (next) button  
• During playback, press to skip to the next chapter,  
track or file.  
25. F (pause) button  
• Press to activate short cut keys on some BD-video  
function.  
• When file list / setup list is shown, press to switch  
between pages.  
• Press to pause playback.  
• When playback is in pause mode, press repeatedly  
to forward the playback step by step.  
5.  
(home) button  
• Press to display the home menu.  
26. INFO  
button  
6. DISC MENU / POP-UP MENU button  
• Press to display the information display.  
27. TOP MENU button  
BD:  
• Press to display the pop-up menu.  
DVD:  
BD:  
• Press to display the disc menu.  
7. K / L / s / B buttons  
• Press to select items or settings.  
8. OK button  
• Press to display the top menu.  
DVD:  
• Press to display the title menu.  
28. REPEAT A-B button  
• Press to play back a defined section between point  
A and B repeatedly.  
29. REPEAT button  
• Press to confirm or select menu items.  
9. BACK U button  
• Press to return to the previously displayed menu or  
screen function.  
• Press to toggle between various repeat modes.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FUNCTIONAL OVERVIEW  
Installing the Batteries in the Remote Control  
Using a Remote Control  
EN  
Install the batteries (AAAx2) matching the polarity  
indicated inside battery compartment of the remote  
control.  
Keep in mind the following when using the remote  
control:  
• Make sure that there are no obstacles between the  
remote control and the infrared sensor window on the  
unit.  
1) Open the cover.  
• Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the infrared  
sensor window of the unit.  
• Remote control for different devices can interfere with  
each other. Avoid using remote control for other device  
located close to the unit.  
• Replace the batteries when you notice a fall off in the  
operating range of the remote control.  
• The maximum operable ranges from the unit are as  
follows.  
2) Insert batteries.  
- Line of sight:  
approx. 23 feet (7 m)  
- Either side of the center:  
approx. 16 feet (5 m) within 30°  
- Above:  
approx. 16 feet (5 m) within 15°  
- Below:  
approx. 10 feet (3 m) within 30°  
Make sure to match + and - on the batteries to the  
marks indicated in the battery compartment.  
3) Close the cover.  
30˚  
30˚  
16 feet (5 m)  
16 feet (5 m) 23 feet (7 m)  
Note  
Incorrect use of batteries can result in hazards such as  
leakage and bursting. Please observe the following:  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together.  
Although they may look similar, different batteries  
may have different voltages.  
• Make sure that the + and - ends of each battery  
match the indications in the battery compartment.  
• Remove batteries from battery compartment that is  
not going to be used for a month or more.  
• When disposing of used batteries, please comply  
with governmental regulations or environmental  
public instruction’s rules that apply in your country  
or area.  
• Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Front Panel Display  
1
2
3
4
* Brightness of the display can be adjusted. Refer to “Front Panel Brightness” in “LIST OF SETTINGS” on page 34.  
1. Displays repeat icon. (Appears during repeat playback.)  
2. Displays media mode icon (disc mode or SD card mode).  
3. Displays playback status icon. Refer to the table below.  
4. Displays various kinds of information such as title number, elapsed playing time, repeat type, menu type, etc.  
Playback status icon  
Mode  
Playback is in progress  
Stop mode  
Pause mode  
Fast forward mode  
Fast reverse mode  
Slow forward mode  
e.g.)  
Disc is being played back.  
Indicating the current title number and the elapsed time.  
Current chapter is in chapter repeat mode during playback of disc.  
Loading a disc.  
Dolby Digital audio is being played back during playback of disc.  
DTS audio is being played back during playback of disc.  
Home menu is displayed and the unit is in disc mode.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FUNCTIONAL OVERVIEW  
Guide to On-Screen Display  
EN  
Home Menu  
When you turn on the unit, home menu will appear  
automatically. Otherwise, press [ (home)].  
Blu-ray Disc Player  
Disc Tray  
SD Card  
Settings  
Product Info  
“Disc Tray”  
“SD Card”  
:
:
To access the track / file list or media  
filter screen  
To access the file list or media filter  
screen  
“Settings”  
“Product Info”  
:
:
To access the settings menus  
To access the product information  
Menu Screen  
BD-Player  
Settings  
1
2
Quick Setup  
Player Menu  
Advanced Setup  
Factory Default  
TV Shape  
3
HDMI Video Resolution  
1. Directory  
Displays the current hierarchy.  
2. Menus  
3. Options  
Displays options for the high-lighted item on the left  
whenever available.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CONNECTIONS  
Connection to the TV  
Choose the appropriate connection, then proceed to the corresponding  
instruction (A, B or C) on the next page.  
1
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)  
Best  
Your TV  
HDMI IN  
Go To  
High  
Definition  
TV  
HDMI cable  
Video  
Audio  
A
No analog audio connection required.  
(*1) 1080i : Outputs the video data with frame rate of 30 frames per second.  
(*2) 1080p : Outputs the video data with frame rate of 60 frames per second.  
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility.  
(Supports up to 1080i resolution.)  
Better  
COMPONENT  
VIDEO IN  
Y
PB/CB  
RCA component video cable  
Your TV  
High  
Definition  
TV  
Video  
Go To  
PR/CR  
B
+
L
RCA audio cable  
Audio  
AUDIO IN  
R
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables at your local store.  
(Supports only 480i resolution.)  
Basic  
VIDEO IN  
RCA video cable  
Your TV  
Video  
Go To  
Standard  
Definition  
TV  
L
+
C
RCA audio cable  
AUDIO IN  
R
Audio  
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted  
due to the copy right protection system.  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x1  
• RCA video cable x1  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CONNECTIONS  
Connect the cables by following the descriptions below.  
EN  
2
HDMI Video / Audio Connection  
Your TV  
Y
P
R/CR  
B/CB  
L
A
HDMI OUT  
P
LAN  
COAXIAL  
R
DIGITAL OUT  
AUDIO  
OUT  
VIDEO  
OUT  
COMPONENT  
VIDEO OUT  
PCM/BITSTREAM  
HDMI IN  
HDMI cable  
($-) /54  
Component Video + Standard Audio Connection  
Your TV  
Y
P
R/CR  
B/CB  
L
HDMI OUT  
P
LAN  
COAXIAL  
R
B
DIGITAL OUT  
AUDIO  
OUT  
VIDEO  
OUT  
COMPONENT  
VIDEO OUT  
PCM/BITSTREAM  
RCA component  
video cable  
COMPONENT  
VIDEO IN  
Y
P
R/CR  
B/CB  
Y
L
PR/CR  
PB/CB  
L
P
AUDIO IN  
R
R
AUDIO  
OUT  
COMPONENT  
VIDEO OUT  
RCA audio cable  
Standard Video + Standard Audio Connection  
Your TV  
C
Y
P
R/CR  
B/CB  
L
HDMI OUT  
P
LAN  
COAXIAL  
R
DIGITAL OUT  
AUDIO  
OUT  
VIDEO  
OUT  
COMPONENT  
VIDEO OUT  
PCM/BITSTREAM  
L
L
VIDEO IN  
AUDIO IN  
RCA video cable  
R
R
AUDIO  
OUT  
VIDEO  
OUT  
RCA audio cable  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
HDMI Mode and Actual Output Signals  
Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT jack. The video resolution  
changes as follows every time [HDMI] is pressed. Or change the setting in the “HDMI Video Resolution” in the settings  
menu.  
Font Panel Display  
Press [HDMI]  
HDMI Video Resolution  
480 Progressive  
720 Progressive  
1080 Interlaced  
1080 Progressive  
Press [HDMI]  
Press [HDMI]  
Press [HDMI]  
Copyright protection system  
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the  
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-  
bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption  
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of  
your display device (or AV receiver / amplifier) for more information.  
Note  
• When using HDCP-incompatible display device, the picture will not be viewed properly.  
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length)  
may be limited by the device that is connected.  
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In  
connections with device such as this unit, audio signals are not output from the HDMI OUT jack.  
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-  
DVI converter cable, the signals are output in digital RGB.  
• Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from  
the HDMI OUT jack.  
• Pressing [HDMI] does not work during the playback of a BD-video.  
• When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press  
[HDMI] repeatedly to change the resolution or press and hold [B (play)] on the front panel for 5 seconds to change  
the setting back to its default.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to an Audio System  
• When you change the connections, all devices should be turned off.  
• Refer to the manual accompanying external devices for more information.  
EN  
2-Channel Analog Audio Connection  
stereo system  
Digital Audio Connection  
AV receiver / amplifier  
audio  
AUDIO IN  
R
L
DIGITAL AUDIO INPUT  
COAXIAL  
digital audio coaxial  
input jack  
analog audio input jacks  
digital audio  
RCA cable  
RCA audio  
cable  
this unit  
AUDIO OUT  
DIGITAL OUT (COAXIAL)  
Audio Output from Analog Out (2ch Jacks)  
“Blu-ray Disc Audio” setting A  
“Primary Audio Only”  
“Mix Audio Output”  
Media  
ª
Audio Source  
ª
Dolby Digital  
DownMix 2ch PCM  
DownMix 2ch PCM*1  
DownMix 2ch PCM*2  
DownMix 2ch PCM  
DownMix 2ch PCM*3  
DownMix 2ch PCM  
DownMix 2ch PCM*1  
DownMix 2ch PCM*2  
DownMix 2ch PCM  
DownMix 2ch PCM*3  
DownMix 2ch PCM  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
BD-video  
DTS-HD  
LPCM  
Dolby Digital  
DTS  
LPCM  
PCM  
DownMix 2ch PCM  
DownMix 2ch PCM  
DownMix 2ch PCM  
2ch PCM  
DVD-video  
Audio CD  
DTS-CD  
2ch PCM  
DTS  
DownMix 2ch PCM  
*1  
*2  
*3  
) Only the independent substream is decoded.  
) Only the Dolby Digital substream is decoded.  
) Only the core substream is decoded.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CONNECTIONS  
HDMI Audio Connection  
audio  
AV receiver / amplifier with an HDMI input jack  
this unit  
HDMI IN  
HDMI cable  
Supplied cables used in these connections are as follows:  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables at your local store.  
Network Connection with LAN  
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.  
(For BD-Live information, please refer to page 28.)  
Telecommunications  
equipment (modem, etc.)  
Hub or broadband router  
WAN  
LAN  
LAN  
5
4
3
2
1
LAN cable  
LAN cable  
Internet  
LAN  
this unit  
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
Note  
• After connecting a LAN cable, set up necessary network settings.  
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.  
• If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a  
broadband router.  
• If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port,  
use a hub.  
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.  
• Do not connect your PC directly to the LAN terminal of this unit.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
BEFORE YOU START  
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.  
EN  
Finding the Viewing Channel on Your TV  
After you have made all the necessary  
connections, press [Q (standby-on)] to  
1
turn on the unit.  
Turn on your TV.  
2
3
Press the button on the TV’s remote  
control that accesses the external input  
channel. It may be labeled “SOURCE”,  
“AV” or “SELECT” (refer to your TV’s  
user manual). Or press “2” on the TV’s  
remote control, then press channel  
down button repeatedly until you see  
the PHILIPS splash screen.  
This is the correct viewing channel (external  
input channel).  
• If a certain amount of time has passed since  
you turned on the unit, you may see the home  
menu instead of the PHILIPS splash screen.  
Home menu:  
Blu-ray Disc Player  
Disc Tray  
SD Card  
Settings  
Product Info  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INFORMATION ON PLAYBACK  
Information on Playback  
Before you start playing back a disc, read the following information.  
Playable files  
Media  
Playable Discs and Files  
BD-RE/-R  
DVD-RW/-R  
This unit is compatible to play back the following discs / files.  
To play back a disc / file, make sure that it meets the  
CD-RW/-R  
JPEG  
requirements for region codes and color systems as  
described below. You can play back discs that have the  
following logos. Other disc types are not guaranteed to  
play back.  
SD Memory Card (including SDHC)  
miniSD Card  
microSD Card  
Readable cards  
SD Memory Card (8 MB - 2 GB)  
SDHC Memory Card (4 GB - 8 GB)  
miniSD Card (8 MB - 2 GB)  
microSD Card (8 MB - 2 GB)  
Playable files / data  
Playable discs  
Logos  
JPEG, picture-in-picture  
Blu-ray Disc  
commentary, subtitles or  
other extras for BD-ROM ver.  
2 (Profile 2.0 / Profile 1.1)  
- BD-video  
- BD-RE* (ver. 2.1)  
(Recorded in BDMV format)  
- BD-R* (ver. 1.1 / 1.2 / 1.3)  
(Recorded in BDMV format)  
(Unclosed discs may not be played  
back.)  
Note for SD Memory Cards  
• This unit supports SD Memory Card with FAT12 /  
FAT16 file system, and SDHC Memory Card with  
FAT32 file system.  
• This unit does not support NTFS file system.  
• This unit may not read the SD Memory Cards  
formatted on a computer. If that is the case, please  
reformat the SD Memory Cards in this unit and try  
again.  
• This unit does not support miniSDHC and microSDHC  
Memory Card.  
• For miniSD Card and microSD Card, the adapter is  
necessary.  
DVD-video  
DVD-RW  
(finalized video mode discs only)  
DVD-R  
(finalized video mode discs only)  
CD-DA (audio CD)  
CD-RW  
miniSD Card  
microSD Card  
adapter  
adapter  
miniSD Card  
microSD  
Card  
• Portions of this product are protected under  
copyright law and are provided under license by  
ARIS / SOLANA / 4C.  
• Please keep the SD Memory Cards in their cases when  
you are not using them.  
• Do not try to open or modify the card.  
• Do not touch the terminal surface with your fingers or  
any metals.  
• Do not attach additional labels or stickers to cards.  
• Do not remove the label of the SD Memory Cards.  
• This unit recognizes up to 8 characters of file name in  
the SD Memory Card. Characters after 8th will not be  
displayed.  
CD-R  
Kodak Picture CD  
DTS-CD  
-
(*) Due to the intentional progression of the Blu-ray Disc  
format by its standard setting authority, the company  
cannot guarantee or warrant the playability of future  
extensions of the Blu-ray Disc format with this product.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INFORMATION ON PLAYBACK  
Unplayable Discs and Files  
Hint for Disc Playback  
EN  
The following discs will not be played back in this unit.  
The contents of disc are generally divided into sections or  
folders (groups of titles / files) as shown below.  
• CD-ROM  
• DVD-RAM  
• DVD-audio  
• HD DVD  
• CD-I (compact disc-interactive)  
• VSD (video single disc)  
• video CD  
BD-video, DVD-video  
title 1  
title 2  
• SVCD  
chapter 1  
track 1  
chapter 2 chapter 1 chapter 2 chapter 3  
• unfinalized disc  
• BD-RE (ver.1.0)  
• BD-RE (ver.2.1) (Recorded in BDAV format)  
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)  
• BD / DVD / CD / SD Memory Card contains DivX®, MP3  
and Windows Media™ Audio files  
Audio CD  
• BD / DVD hybrid disc (played back as a BD-video only)  
• Super Audio CD - Only the sound on the CD layer can be  
heard. The sound on the high-density Super Audio CD  
layer cannot be heard.  
track 2  
track 3  
track 4  
track 5  
• Playability of dual discs are not guaranteed.  
JPEG  
file 1  
Color Systems  
folder (group) 2  
file 2  
folder (group) 1  
file 1  
file 2  
file 3  
BD-video and DVD-video are recorded in different color  
systems throughout the world. The most common color  
system is NTSC (which is used primarily in the United  
States and Canada).  
This unit employs NTSC color system, so the disc you play  
back must be recorded in the NTSC system. You cannot  
play back the disc recorded in other color systems.  
Description for Icons  
[
[
] : group (folder) icon  
Region Codes  
] : group (folder) return icon  
BD-video  
DVD-video  
This unit has been designed to play back  
BD-video with region “A”, DVD-video with  
region “ALL” or “1” for BDP3010/F7 (USA /  
Canada) and region “ALL” or “4” for  
BDP3010/F8 (Mexico). You cannot play  
back BD-video or DVD-video that are  
labeled for other regions. Look for the  
symbols on the right on your  
BD-video or DVD-video.  
If these region symbols do not appear on  
your BD-video or DVD-video, you cannot  
play back the disc in this unit. The letter or (USA / Canada)  
number inside the globe refers to region  
of the world. A BD-video or DVD-video  
- “Folders” refers to the groups of files.  
- “Tracks” refers to the contents recorded on the audio  
CD.  
- “Files” refers to the contents on a disc which are  
recorded in JPEG file format.  
Note  
• Unrecognizable characters will be replaced by “.  
• For BD, DVD and SD card, this unit can recognize up  
to 999 groups (folders), and 9,999 tracks / files.  
• For CD, this unit can recognize up to 255 groups  
(folders), and 999 tracks / files.  
For BDP3010/F7  
labeled for a specific region can only be  
played back in the unit with the same  
For BDP3010/F8  
region code.  
(Mexico)  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON PLAYBACK  
Guide to File List  
How to Insert a Disc  
1) Press [A (open/close)] to open the disc tray.  
Audio CD Track List  
2) Place the disc on the disc tray with its label side  
facing up.  
1
2
BD-Player  
Music  
14  
Track 001  
9
Track 002  
Track 003  
Track 004  
Track 005  
Track 006  
3
CDDA  
Track 001  
00 : 03 : 40  
00 : 00 : 39  
4
5
6
Align the disc to the  
disc tray guide.  
Track 007  
8
Track 008  
Page Down  
* Make sure the disc is compatible with this unit (refer to page 18 for the list  
of compatible discs).  
7
3) Press [A (open/close)] to close the disc tray.  
1) Total track number  
2) Repeat status  
3) Image  
It may take a while to load the disc.  
4) Elapsed playing time of the current track  
5) Playing track number  
6) Total time of the current track  
7) Playing media  
To eject the disc:  
Press [A (open/close)] to open the disc tray.  
Remove the disc.  
Press [A (open/close)] to close the disc tray.  
8) Track list  
9) Playback status  
Picture Mode File List  
1
2
BD-Player | Disc Tray  
Pictures  
24  
..  
3
5
4
Media Filter  
Page Down  
1) Directory  
2) Number of contents in the current hierarchy  
3) Current file name  
4) Group (folder) / File list (thumbnails)  
5) Root folder  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BASIC PLAYBACK  
Playing Back a BD or a DVD  
EN  
Insert a disc (refer to page 20 on  
how to insert a disc).  
1
2
Playback may start automatically.  
If not, press [B (play)].  
Some discs may show a title or a disc menu. In  
To pause playback:  
Press [F (pause)].  
To return to the normal playback:  
Press [B (play)].  
To stop playback:  
Press [C (stop)].  
Playback will be in Resume-On-Stop mode,  
and the home menu will appear.  
<Resume-On-Stop mode>  
When you press [B (play)] next time, the  
playback will start from the point where it has  
been stopped.  
Note  
• Playback will also stop and the home menu will  
appear when you press [ (home)].  
• For BD-Java application, the Resume-On-Stop may  
not be available.  
• If you press [OK] instead of [B (play)], playback can  
be started from the beginning of the disc even if it  
was in the Resume-On-Stop mode.  
• You can also start from the beginning of the disc if  
you press [S (previous)] while the resume message  
is displayed.  
• The resume message can be removed by pressing  
[BACK U].  
• Resume-On-Stop mode remains in effect even after  
power is turned off, but will be cancelled once the  
disc is ejected.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BASIC PLAYBACK  
Playing Back an Audio CD or a Disc with JPEG Files  
How to Navigate through the Track / File List  
• Use [K / L] to move the highlight up and down in the  
list.  
• To access the files in a group (folder), select the desired  
group (folder), then press [OK].  
• Press [s], or select [  
], then press [OK] to go back to  
the previous hierarchy.  
• Press [s] to go back to the previous screen.  
• Press [BLUE] or [YELLOW] to change the page of the list.  
• Press [RED] to go back to the media filter screen.  
• Press [ (home)] to go back to the home menu.  
Recommended specifications:  
JPEG  
Resolution  
• Upper limit  
: 2,560 x 1,900 dots  
(sub sampling is 4:4:4)  
: 5,120 x 3,840 dots  
(sub sampling is up to  
4:2:2)  
• Lower limit  
• Maximum file size of a  
picture  
: 32 x 32 dots  
: 5 MB  
Folder / File number limitations:  
BD, DVD and SD card  
• 999 folders (groups) and 9,999 files.  
CD  
• 255 folders (groups) and 999 tracks / files.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BASIC PLAYBACK  
Insert a disc (refer to page 20 on  
Select a group (folder) or track / file  
you want to play back. Then press  
EN  
how to insert a disc).  
1
2
4
• Home menu appears automatically.  
[B (play)] or [OK] to start playback.  
With “Disc Tray” selected, press  
[OK].  
To skip to the next track / file:  
Press [T (next)].  
To skip to the previous track / file:  
Press [S (previous)].  
• Media filter screen will appear.  
• For audio CD, skip to step 4.  
Blu-ray Disc Player  
To pause playback:  
Press [F (pause)].  
To return to the normal playback:  
Press [B (play)].  
Disc Tray  
SD Card  
Settings  
Product Info  
To stop playback:  
Press [C (stop)].  
Playback will be in Resume-On-Stop mode.  
<Resume-On-Stop mode for audio CD>  
Playback will start from the point where it is  
stopped next time you press [B (play)].  
Select the type of the file you want  
to play back in the media filter  
screen. Then press [OK] to display  
the file list.  
If you press [OK] instead of [B (play)],  
playback will start from the beginning of the  
track instead of resuming from the stop point.  
3
<Resume-On-Stop mode for JPEG>  
Playback will start from the beginning of the  
current file next time you press [B (play)] or  
[OK].  
To go back to the media filter screen:  
Press [RED] in Resume-On-Stop mode.  
Note  
• Playback will also stop and the home menu will  
appear when you press [ (home)].  
• With regard to the multi-border BD-RE/-R,  
additionally recorded sections cannot be  
recognized.  
• With regard to the multi-border DVD-RW/-R,  
additionally recorded sections may not be  
recognized.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BASIC PLAYBACK  
Kodak Picture CD  
Reading the SD Memory Card  
You can play back the JPEG files in an SD Memory Card.  
With the SD Memory Card, you can also enjoy the  
following functions.  
- Special additional contents for BD-ROM Profile 1 ver.1.1.  
(For more information about the special additional  
contents, refer to the instruction book that came with  
the disc.)  
This unit can also run JPEG files stored on Kodak Picture  
CD. You can enjoy picture images on the TV set by playing  
back the Kodak Picture CD. This unit conforms to ver.7.0 of  
Kodak Picture CD. For details of Kodak Picture CD, contact  
a shop that provides developing service of Kodak Inc.  
Insert a Kodak Picture CD.  
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more  
information about BD-Live, refer to page 28.)  
• Home menu appears automatically.  
1
2
3
With “Disc Tray” selected, press  
[OK].  
SD card  
• Media filter screen will appear.  
Select “Pictures” in the media filter  
SD Memory Card  
screen. Then press [OK] to display  
the file list.  
Insert an SD card and then press  
[
(home)].  
1
2
3
4
Home menu appears.  
With “SD Card” selected, press  
[OK].  
Tips for JPEG / Kodak Picture CD Playback  
• Media filter screen will appear.  
• Every press on [ANGLE] will turn the image  
clockwise by 90 degrees when an image is displayed.  
Select the type of the file you want  
to play back in the media filter  
screen. Then press [OK] to display  
the file list.  
Note  
• Some unplayable folders or files may be listed due to  
the recording status.  
• High-resolution JPEG files take longer to be  
displayed.  
• Progressive JPEG files (JPEG files saved in progressive  
format) cannot be played back in this unit.  
4
To remove the SD Memory Card:  
In stop mode, gently push in the SD Memory  
Card, then pull it out slowly.  
Note  
• In the “SD Card” mode, the resume information will  
be cleared when;  
-[C (stop)] is pressed while in the Resume-On-Stop  
mode.  
-the SD Memory Card is removed.  
-the unit is turned into the standby mode.  
• Do not remove the SD Memory Card or turn the unit  
to the standby mode while the contents of the card  
are in playback. It may result in malfunction or loss of  
the card’s data.  
• Do not delete the folders or files in the SD Memory  
Card with your computer. This unit may not read the  
SD Memory Cards formatted on a computer.  
• If a folder or file name includes one of the following  
unrecognizable characters, the folder or file name  
may not be displayed correctly.  
-Unrecognizable characters :  
. , " = + [ ] ; / \ : | ¥  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BASIC PLAYBACK  
Using the Title / Disc Menu  
EN  
Some BD-video or DVD-video may contain a title menu  
which describes the contents of the disc, or a disc menu  
which guides you through the available functions in the  
disc.  
With such discs, a title menu or a disc menu may appear  
automatically when you insert the disc. Otherwise, press  
[TOP MENU] or [DISC MENU / POP-UP MENU] to call up  
the menu. Refer to the disc’s manual on how to navigate  
through the menu.  
Note  
• Menus vary among discs. Refer to the information  
accompanying the disc for details.  
[TOP MENU] or [DISC MENU / POP-UP MENU] may  
not work with some discs.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SPECIAL PLAYBACK  
Fast Forward / Fast Reverse  
Zoom  
During playback, you can zoom up the picture.  
1) During playback, press [ZOOM] repeatedly.  
1) During playback, press [D (forward)] repeatedly  
for fast forward.  
.
During playback, press [E (reverse)] repeatedly  
Every time you press [ZOOM], zoom factor will change.  
for fast reverse.  
e.g.) DVD-video  
Every time you press [D (forward)] or [E (reverse)],  
the playback speed will change.  
Zoom  
1.2x  
2) Press [B (play)] to return to the normal playback.  
Note  
• For BD and DVD, speed changes in 5 different levels.  
• For audio CD, speed changes in 3 different levels.  
Slow Forward Playback  
Zoom  
2x  
1) During playback, press [F (pause)] . Then press  
[D (forward)].  
Every time you press [D (forward)], the playback  
speed changes in 3 different levels.  
2) Press [B (play)] to return to the normal playback.  
2) You can move over the zoomed picture using  
[K / L / s / B].  
The gray box with an inner blue box displayed at the  
right bottom corner of the zoomed image is the  
position guide. The inner blue box indicates the  
zoomed area. (Not available for the JPEG playback.)  
3) Press [ZOOM] repeatedly to return to the normal  
playback.  
Note  
• Only slow forward is available.  
Step by Step Playback  
Note  
1) In pause mode, press [F (pause)] repeatedly.  
Every time you press [F (pause)], playback will  
advance one step at a time.  
• For JPEG files, slide show of the zoomed picture is  
not possible.  
• For JPEG files, 4x zoom is not available.  
• For some DVD, 4x zoom is not available.  
[ZOOM] does not work during the playback of the  
BD-video.  
2) Press [B (play)] to return to the normal playback.  
[ZOOM] does not work while DVD menu is  
displayed.  
• For JPEG files, when changing the zoom factor or  
moving the zoom position, the screen may become  
black for a moment. This is not a malfunction.  
Note  
• Only step by step forward is available.  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
SPECIAL PLAYBACK  
Repeat Playback  
Available repeat function varies depending on the discs.  
Slide Show  
EN  
1) During playback, press [REPEAT] repeatedly to  
select the desired repeat function.  
REPEAT MODE  
Chapter Repeat  
The current chapter will be  
played back repeatedly.  
AVAILABLE MEDIA  
2) Open the folder which contains the desired JPEG  
files.  
BD-video / DVD-video  
3) Use [K / L / s / B] to select a desired file to be  
played back, then press [B (play)] or [OK].  
• An image will be played back from the selected file  
and go to the next one in turn every 10 seconds.  
4) Press [C (stop)] to stop playback.  
To return to the first item:  
Title Repeat  
The current title will be  
played back repeatedly.  
Track Repeat  
The current track or file will  
be played back repeatedly.  
All Repeat  
All tracks in the media will be  
played back repeatedly.  
BD-video / DVD-video  
Audio CD / DTS-CD  
Audio CD / DTS-CD  
Press [TOP MENU].  
To return to the file played last:  
Press [DISC MENU / POP-UP MENU].  
Note  
Group Repeat  
• Large-size JPEG files take a few moments to be  
displayed.  
The current group (folder)  
will be played back  
repeatedly.  
JPEG  
PiP (BONUSVIEW) Setting  
Random Repeat (Audio CD)  
Repeats the random  
playback.  
Random Repeat (JPEG)  
Repeats the random  
playback in a folder.  
Audio CD / DTS-CD  
JPEG  
Some BD-videos have the PiP function which enables you  
to display the secondary video in the primary video. You  
can call up the secondary video by pressing  
[BONUSVIEW (PiP)] whenever the scene contains the  
secondary video.  
Note  
• The repeat setting will be cancelled when you stop  
playback.  
Primary  
video  
• If you press [REPEAT A-B] when the repeat setting  
for BD, DVD or CD playback is set, the repeat setting  
will be cancelled.  
Secondary  
video  
A-B Repeat  
1) During playback, press [BONUSVIEW (PiP)].  
PiP information will appear.  
You can play back the specific part (between point A and  
point B) repeatedly.  
2) Use [K / L] to select the secondary video you want  
1) During playback, press [REPEAT A-B] once at the  
to show.  
point where you want to set point A.  
2) During playback, press [REPEAT A-B] again at the  
point where you want to set point B.  
• The secondary video will be displayed with the  
secondary audio.  
• You can use [K / L] to switch between “On” or “Off”.  
3) Press [BACK U] to remove the PiP information.  
• On how to output the secondary audio, refer to  
As soon as you set point B, the part between point A  
and point B will start to play repeatedly.  
To cancel A-B repeat:  
Press [REPEAT A-B] repeatedly until “Off” appears.  
Note  
• Point B should be set within the same title or track as  
point A.  
• If you press [REPEAT A-B] when the repeat setting  
for BD, DVD or CD playback is set, the repeat setting  
will be cancelled.  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
SPECIAL PLAYBACK  
Enjoying BD-Live Discs with Internet  
Title / Chapter Search  
You can enjoy the BD-Live functions which enable you to  
use the interactive functions when the unit is connected to  
the Internet. (For the Network connection, refer to  
Using [S (previous)] / [T (next)]  
1) During playback, press [T (next)] to skip the  
current title or chapter and move to the next.  
The title or chapter will move forward by one at a time.  
• If there is no chapter in one title, the current title may  
be skipped.  
Examples for BD-Live interactive functions:  
• Download the additional contents such as the movie’s  
trailer, subtitles and BD-Java, etc.  
• While downloading, special video data may be played  
To go back to the beginning of the current title or  
chapter, press [S (previous)].  
Press [S (previous)] repeatedly to go to the previous  
title or chapter. The title or chapter may move  
backward one at a time.  
back.  
- Service and functions differ depending on the disc.  
Follow the instructions given by the disc when using  
the BD-Live function.  
- You must insert an SD Memory Card when using the  
BD-Live function. (SD Memory Card of 1GB is  
recommended.)  
- Do not remove the SD Memory Card when using the  
BD-Live function.  
Using [INFO  
]
1) During playback, press [INFO ].  
Disc  
Title  
001/012  
Note  
Chapter  
Playing Time  
Audio  
001/023  
• You must connect the unit to the Internet and set up  
necessary settings in order to use the BD-Live  
function.  
00:01:31  
Dolby Digital  
• For certain discs, setting for “BD-Live Setting” may  
need to be changed.  
2) Use [K / L] to select “Title” or “Chapter”.  
• Depending on your connection environment, it may  
take time to connect to the Internet or the Internet  
may not be connected.  
• When BD-Live functions are used and the unit is  
connected to the Internet, you may be charged for  
this communication.  
3) Use [Number buttons] or [s / B] to enter the title /  
chapter number.  
4) Press [OK].  
Playback will start from the beginning of the title /  
chapter.  
• Some discs with BD-Live function require memory  
when playing back the content. If you cannot play  
back a disc with BD-Live function, insert an SD  
card(1GB or more) which is formatted on this unit.  
5) Press [INFO ] to remove the information display.  
Using [Number buttons] (Direct Search)  
Title Search  
Note for AACS Online  
• The player or disc IDs may be sent to the content  
provider when playing back a disc with BD-Live  
function.  
1) In stop mode, enter the title number you want to  
search using [Number buttons].  
Playback of the title will start in a few seconds.  
• If you save your viewing history on the server by  
using these IDs, you will be introduced to other  
similar movies.  
Chapter Search  
1) During playback of a title, enter the chapter number  
you want to search using [Number buttons].  
• You can save game score histories.  
Playback of the chapter will start in a few seconds.  
Note  
• As for the BD-video, how it performs will be strongly  
determined by the disc, and may not perform as  
described.  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SPECIAL PLAYBACK  
Track Search  
Switching Subtitles  
EN  
Some BD and DVD may have subtitles in 1 or more  
languages. For commercially available discs, the  
supported languages can be found on the disc case.  
Follow the steps below to switch the subtitle languages  
during playback.  
Using [S (previous)] / [T (next)]  
1) During playback, press [T (next)] to skip the  
current track or file and move to the next.  
The track / file will move forward one at a time. To go  
back to the beginning of the current track / file press  
[S (previous)].  
1) During playback, press [SUBTITLE] repeatedly to  
display “Primary”, “Secondary” or “Subtitle Style”.  
Press it repeatedly to go to the previous track / file. The  
track / file will move backward one at a time.  
“Primary”  
: Sets the subtitle for the primary  
video.  
Time Search  
“Secondary”  
: Sets the subtitle for the secondary  
video.  
“Subtitle Style” : Sets style of the subtitle.  
2) Use [K / L] to select your desired subtitle or style.  
1) During playback, press [INFO ].  
Disc  
Primary  
1
English  
Title  
001/012  
Chapter  
Playing Time  
Audio  
001/023  
• Use [s / B] to switch between current subtitle  
setting and “Off”.  
3) Press [SUBTITLE] repeatedly to exit.  
00:01:31  
Dolby Digital  
2) Use [K / L] to select “Playing Time”.  
3) Use [Number buttons] to enter the time count you  
want to jump to.  
1) During playback, press [SUBTITLE].  
2) Use [K / L] to select your desired subtitle.  
e.g.)  
Subtitle  
1
English  
Entering 1 hour 45 minutes and 15 seconds.  
• Use [s / B] to switch between current subtitle  
setting and “Off”.  
3) Press [SUBTITLE] to exit.  
Press  
4) Press [OK].  
Playback will start from the desired time count.  
Note  
• Some discs will only allow you to change the  
subtitles from the disc menu or pop-up menu. Press  
[TOP MENU] or [DISC MENU / POP-UP MENU] to  
display the disc menu or pop-up menu.  
• If the disc has no subtitle language or subtitle style,  
“Not Available” will be displayed on the TV screen.  
• During playback of the secondary video, the primary  
subtitle setting is not available except when there is  
no subtitle for the secondary video.  
5) Press [INFO ] to remove the information display.  
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SPECIAL PLAYBACK  
Switching Audio Soundtrack  
Switching Camera Angles  
Some BD and DVD contain multiple audio streams. Those  
are often in different audio languages or audio formats.  
For BD, available audio varies depending on “Blu-ray Disc  
Audio” setting. Refer to page 33 for more information.  
Some BD-video and DVD-video contain scenes which have  
been shot simultaneously from various angles. You can  
change the camera angle if available on the disc.  
1) During playback, press [ANGLE].  
• The selected angle will be displayed on the display  
bar at the top of the TV screen.  
1) During playback, press [AUDIO] repeatedly to  
display “Primary” or “Secondary”.  
2) Use [K / L] to select your desired angle.  
“Primary”  
: Sets the audio for the primary video.  
Angle  
1 / 5  
“Secondary” : Sets the audio for the secondary video.  
2) Use [K / L] to select your desired audio stream  
3) Press [ANGLE] to exit.  
channel.  
Primary  
2
English Dolby Digital Multi  
• For “Secondary”, use [s / B] to switch between  
current audio setting and “Off”.  
3) Press [AUDIO] repeatedly to exit.  
1) During playback, press [AUDIO].  
2) Use [K / L] to select your desired audio stream  
channel.  
Audio  
2
English Dolby Digital Multi  
3) Press [AUDIO] to exit.  
Note  
• The secondary audio will not be output when the  
secondary video is not displayed or when “Blu-ray  
Disc Audio” is set to “Primary Audio Only”. (For some  
BD, secondary audio will be output even when  
secondary video is off.)  
• The sound mode cannot be changed during  
playback of discs not recorded in multiple audio.  
• Some discs allow changing the audio language  
setting on the disc menu. (Operation varies  
depending on the discs. Refer to the manual  
accompanying the disc.)  
[AUDIO] may not work on some discs with multiple  
audio streams or channels (e.g. DVDs that allow  
changing audio setting on the disc menu).  
• If the disc has no audio language, “Not Available” will  
be displayed on the TV screen.  
• For DTS-CD (5.1 music disc), selecting audio streams  
or channels is not available.  
• You can check the selected audio stream in the  
information display. To call up the information  
display, press [INFO ] during playback.  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LIST OF SETTINGS  
In the settings menu, you can customize the various kinds of settings as you prefer.  
Refer to the following instruction to navigate through the settings menus.  
1) Press [ (home)] to access the home menu.  
EN  
2) Use [K / L] to select “Settings”, then press [OK].  
3) Use [K / L] to select “Advanced Setup”, then press [OK].  
4) Use [K / L] to move the highlight up and down in the list.  
Options of the highlighted item will be displayed in the list on the right whenever available.  
5) To make a selection or to access options of an item, select the desired item, then press [OK].  
6) Press [ (home)] to exit.  
Refer to the following table for the types of settings you can customize.  
Settings with (*) can be accessed from the “Quick Setup” also.  
The item highlighted in gray is the default setting.  
Category  
Menus / Options  
Default  
Ceština  
Dansk  
Deutsch  
English  
Español  
Description  
Language Audio  
Sets the audio language for BD-video  
or DVD-video playback.  
• If you select “Default”, the disc’s  
original language will be in effect.  
Norsk  
Polski  
Português  
Русский  
suomi  
Svenska  
Türkçe  
Français  
Italiano  
Magyar  
Nederlands  
Subtitle  
Off  
Ceština  
Dansk  
Sets the subtitle language for BD-  
video or DVD-video playback.  
Norsk  
Polski  
Deutsch  
English  
Español  
Português  
Русский  
suomi  
Svenska  
Türkçe  
Français  
Italiano  
Magyar  
Nederlands  
Disc Menu  
Sets the language for disc menu.  
Ceština  
Dansk  
Norsk  
Polski  
Deutsch  
Português  
Русский  
suomi  
Svenska  
Türkçe  
English  
Español  
Français  
Italiano  
Magyar  
Nederlands  
Player Menu*  
Auto (XXXX)  
English  
Español  
Français  
Sets the language for player menu  
(OSD menu)  
“Auto”:  
Activates the Get & Set Menu  
Language function. Refer to page 41.  
• “Auto” is available only when  
“EasyLink (HDMI CEC)” is set to “On”.  
• Inside the parenthesis next to “Auto”  
will be the current selected  
language.  
Video  
Output  
TV Shape*  
• Refer to page 37 for 4:3 Pan & Scan  
more information. 16:9 Widescreen  
4:3 Letter Box  
Sets the aspect ratio of the playback  
image to fit your TV.  
16:9 Squeeze  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LIST OF SETTINGS  
Category  
Menus / Options  
Description  
Video  
Output  
HDMI Video  
HDMI 1080p/24  
Auto  
Off  
“Auto”:  
Outputs the picture in 1080p/24  
(1080 progressive with 24 frames per  
second) when it meets all the  
conditions listed below:  
• This feature is available  
only when the display  
device is connected by  
an HDMI cable.  
• Refer to page 37 for  
more information.  
• The video resolution and the frame  
rate of the material is 1080p/24 .  
• “HDMI Video Resolution” setting is  
set to “1080p”.  
• The display device supports the  
1080p/24 output.  
“Off”:  
• Outputs the picture in 60p.  
(60 frames per second, progressive)  
HDMI Video Resolution* Auto  
Sets the resolution of the video signal  
being output from the HDMI OUT jack.  
• The selected resolution must also be  
supported by your TV monitor.  
• This feature is available  
only when the display  
device is connected by  
an HDMI cable.  
480p  
720p  
1080i  
1080p  
• Refer to page 37 for  
more information.  
HDMI Deep Color  
Auto  
Off  
Reduces the posterization effect of  
the playback picture.  
• This feature is available  
only when the display  
device is connected by  
an HDMI cable, and  
when it supports Deep  
Color feature.  
“Auto”:  
Reduces the posterization effect by  
automatically outputting the 12 bit  
color whenever the unit recognizes  
the connected display device  
supports Deep Color feature.  
“Off”:  
Outputs the standard 8 bit color.  
Component Output 480i  
480p  
Sets the resolution for the component  
output picture.  
• The selected resolution must also be  
supported by your TV monitor.  
• Refer also to your TV’s manual.  
• If you have selected the resolution  
not supported by your TV by mistake  
and the picture gets disturbed, press  
720p  
1080i  
With regard to the  
DVD-video with a copy  
protection, the resolution  
will be set to 480p  
regardless of the setting  
here.  
If 480p output is not  
available, 480i will be  
output.  
and hold  
[B  
(play)] on the front  
panel for 5 seconds to change the  
setting back to its default.  
• When HDMI cable is connected, only  
“480i” and the resolution selected in  
the “HDMI Video Resolution” will be  
available.  
De-interlacing Mode Auto  
Video  
“Auto”:  
Automatically detects the film or the  
video content, and appropriately  
converts it.  
“Video”:  
Selects when the picture is distorted  
when using “Auto”.  
Black Level  
On  
Off  
Off  
MPEG NR  
3D NR  
Adjust the brightness to compensate  
for ambient room light.  
Noise Reduction  
• Not available for  
BD-video.  
Reduces the noise of the playback  
picture.  
“Off”:  
Deactivates the Noise Reduction.  
“MPEG NR”:  
Combo (3D + MPEG)  
Reduces the block noise seen  
characteristically in the MPEG files.  
“3D NR”:  
Reduces the rough background noise  
so that you can feel the greater feeling  
of depth.  
“Combo (3D + MPEG)”:  
Activating both “MPEG NR” and  
“3D NR”.  
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LIST OF SETTINGS  
Category  
Menus / Options  
Description  
Audio  
Night Mode  
On  
Off  
Compresses the range between soft  
and loud sounds.  
“On”:  
EN  
Activates the Night Mode.  
“Off”:  
Deactivates the Night Mode.  
Down Sampling  
On  
Off  
Sets the sampling rate for outputting  
the PCM audio from the digital output  
(coaxial).  
“On”:  
Over 96 kHz PCM audio will be down  
sampled at 48 kHz.  
“Off”:  
For BD or DVD recorded in LPCM  
without copyright protection,  
2-channel audio signals up to 96 kHz  
are output as LPCM signals.  
Virtual Surround  
On  
Off  
Select “On” to enjoy the stereophonic  
virtual space through your existing 2  
channel stereo system during  
playback of BD-video or DVD-video.  
Blu-ray Disc Audio  
Mix Audio Output  
Primary Audio Only  
“Mix Audio Output”:  
The audio for the secondary video and  
the interactive application will be  
output together with the audio for the  
primary video.  
“Primary Audio Only”:  
Only the audio for the primary video  
will be output.  
When playing back a BD-video which  
only contains the primary audio, the  
audio output will be the same case as  
the “Primary Audio Only” even if the  
“Blu-ray Disc Audio” is set to “Mix  
Audio Output”.  
HDMI Audio  
HDMI Normal  
PCM  
Off  
Sets the audio format for the sound  
output from the HDMI OUT jack.  
• This feature is  
available only when  
the display device is  
connected by an  
HDMI cable.  
• Refer to page 38 for  
more information.  
Digital Out  
Bitstream  
PCM  
Sets the audio format for the sound  
output from the DIGITAL OUT  
(COAXIAL) jack.  
• When HDMI cable is  
connected, make  
sure “HDMI Audio”  
setting is set to “Off”  
to change the  
“Digital Out”  
setting.  
• Refer to page 39 for  
more information.  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
LIST OF SETTINGS  
Category  
Parental  
Menus / Options  
Description  
Rating Level  
All  
Sets the rating level for the disc  
playback.  
• Refer to  
more  
8 [Adult]  
to  
1 [Kid Safe]  
information.  
New PIN  
Sets the new password for the  
“Parental” setting.  
Others  
Auto Standby  
On  
Off  
Sets whether to turn off the unit (to  
the standby mode) automatically  
after 25 minutes of no action since  
the screen saver is activated.  
• If the screen saver is off, the unit  
will be turned off after 30 minutes  
if no action.  
Front Panel Brightness Bright  
Dim  
Sets the brightness of the front panel  
display.  
When “Auto” is selected, the front  
panel display automatically goes dim  
during playback.  
Auto  
Screen Saver  
On  
Off  
Sets whether to activate the screen  
saver after 5 minutes of no action on  
the unit.  
Slide Show Transition Cut In/Out  
Fade In/Out  
Sets the visual effect for the slide  
show transition mode.  
“Cut In/Out”:  
The pictures will cut in and out  
sharply as playback progresses.  
“Fade In/Out”:  
The pictures will fade in and out as  
playback progresses.  
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
LIST OF SETTINGS  
Category  
Menus / Options  
Description  
Others  
EasyLink (HDMI CEC) On  
Sets whether to utilize the  
EasyLink (HDMI CEC) function.  
EasyLink (HDMI CEC) function  
allows your PHILIPS brand  
EasyLink TV to act in conjunction  
with this unit or vice versa.  
EN  
• This feature is  
Off  
available only when  
the display device is  
connected with an  
HDMI cable, and  
when it supports  
EasyLink (HDMI  
CEC) feature.  
• Refer to page 41 for  
more information.  
Network Connection Connection  
• Refer to pages 41-44 Test  
for more  
Perform the network connection  
test. After you change the IP  
address or DNS setting, always  
perform this test.  
information.  
Enable(Easy)  
If you select “Enable(Easy)”,  
Connection test will automatically  
start.  
Enable  
(Custom)  
IP Address Auto(DHCP)  
Set the IP address.  
Setting  
In most cases, you can connect to  
the Internet without making any  
changes to the default setting.  
Manual  
IP Address  
Subnet Mask  
Default  
Gateway  
DNS  
Setting  
Auto(DHCP)  
Manual  
Set the DNS setting.  
In most cases, you can connect to  
the Internet without making any  
changes to the default setting.  
Primary DNS  
Secondary  
DNS  
Proxy  
Setting  
Do Not Use  
Use  
Set the proxy server.  
In most cases, you can connect to  
the Internet without using proxy  
server.  
Proxy  
Address  
Proxy Port  
Connection Auto  
Set the connection speed.  
Speed  
In most cases, you can connect to  
the Internet without making any  
changes to the default setting.  
10BASE Half  
10BASE Full  
100BASE Half  
100BASE Full  
Allow  
BD-Live  
Setting  
You can restrict Internet access  
when BD-Live functions are used.  
Limited Allow  
Prohibit  
Network Status  
You can check the current status of  
the network setting.  
Disable  
Yes  
No  
Yes  
No  
Deactivate the network  
connection.  
Software Upgrade  
Disc  
Set the disc upgrade.  
• Refer to page 45 for Upgrade  
more information.  
You can upgrade the firmware  
version by using the disc.  
To download the latest firmware  
version, please visit  
Network  
Upgrade  
Yes  
No  
Set the network upgrade.  
You can upgrade the firmware  
version by connecting this unit to  
the Internet.  
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF SETTINGS  
Category  
Menus / Options  
Description  
Settings  
Yes  
No  
“Yes”:  
Resets all the settings, except for  
“Parental” and “Network  
Connection”, in “Settings” to the  
factory default.  
“No”:  
Does not perform the initialization.  
Format SD Yes  
“Yes”:  
Re-format SD card.  
“No”:  
Card  
No  
Does not perform the initialization.  
Local  
Storage  
Player  
Yes  
No  
“Yes”:  
Re-format local storage (Player)  
used for BD-Java.  
“No”:  
Does not perform the initialization.  
SD Card  
Yes  
No  
“Yes”:  
Re-format local storage (SD card)  
used for BD-Java.  
“No”:  
Does not perform the initialization.  
Network  
Settings  
Yes  
No  
“Yes”:  
Initialize network settings.  
“No”:  
Does not perform the initialization.  
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Actual Output Resolution by Media:  
TV Shape  
Media  
BD  
EN  
Setting in  
the “HDMI  
Video  
Source  
“Advanced  
Setup”  
home A “Settings”  
A
A “Video Output” A “TV Shape”  
480i/60  
720p/60 1080i/60 720p/24 1080p/24  
Resolution”  
Use this feature to adjust the aspect ratio of the video  
source which is different from your TV’s ratio to fit your TV  
monitor without distorting the picture. Descriptions of  
each setting are as follows:  
480p  
720p  
480p/60  
480p/60  
480p/60  
480p/60  
480p/60  
720p/60  
720p/60 720p/60 720p/60 720p/60  
1080i  
1080i/60 1080i/60 1080i/60 1080i/60 1080i/60  
Video Your  
1080p/24  
Option  
Description  
1080p  
1080p/60 1080p/60 1080p/60 1080p/60  
(*1)  
source  
TV  
or 60  
The highest resolution supported by your display device  
will be in effect automatically.  
4:3 Letter Box  
To enjoy 16:9  
picture on 4:3  
monitor:  
16:9 picture is  
scaled down until  
both sides of the  
picture fits the 4:3  
TV.  
To enjoy 16:9  
picture on 4:3  
monitor:  
Both sides of the  
picture are  
trimmed to fit the  
4:3 TV without  
distorting the  
aspect ratio of the  
picture.  
To enjoy 16:9  
picture on 16:9  
monitor:  
Select this setting  
when you want to  
enjoy 16:9 picture  
on the 16:9 TV.  
To enjoy 4:3  
picture on 16:9  
monitor:  
Use this setting to  
display 4:3 picture  
on the 16:9 TV  
without distorting  
the aspect ratio of  
the picture.  
Auto  
(*1)  
To output the video in 24 Hz, the connected display device must  
support 24 Hz output, and “HDMI 1080p/24” should be set to “Auto”.  
Otherwise, the image will be output in 60 Hz.  
OSD-only  
viewing  
Media  
DVD  
Photo viewing  
Source  
Setting in the  
“HDMI Video  
Resolution”  
480i/60  
4:3 Pan & Scan  
4:3  
480p  
720p  
480p/60  
480p/60  
480p/60  
720p/60  
720p/60  
720p/60  
1080i  
1080i/60  
1080p/60  
1080i/60  
1080p/60  
1080i/60  
1080p/60  
16:9  
1080p  
The highest resolution supported by your display  
device will be in effect automatically.  
Auto  
• When HDMI cable is connected, only “480i” and the  
resolution selected in the “HDMI Video Resolution” will  
be available for the “Component Output”.  
• Composite video out (VIDEO OUT) can only output  
480i/60.  
16:9 Widescreen  
16:9 Squeeze  
Note  
• The selected resolution must also be supported by  
your display device.  
• If your TV and the unit is connected by a DVI cable  
and if you select “Auto”, “480p” will be in effect  
automatically.  
16:9  
4:3  
• Pressing [B (play)] on the front panel for 5 seconds  
changes the setting back to its default.  
(“Component Output” setting will also be reset to  
default (480i).)  
• Refer also to your TV’s manual.  
HDMI Video Resolution  
“Advanced  
Setup”  
“Video  
Output”  
“HDMI  
Video”  
“HDMIVideo  
Resolution”  
home  
A
“Settings”  
A
A
A
A
Set the resolution of the video signal being output from  
the HDMI OUT jack.  
You can select the desired “HDMI Video Resolution”  
among the settings listed below:  
“Auto”,“480p”,“720p”,“1080i”,“1080p”  
• When you make a selection, the TV monitor temporarily  
goes blank and then comes back again. If it does not,  
press [HDMI] to change the resolution or press and hold  
[B (play)] on the front panel for 5 seconds to change the  
setting back to its default.  
EN 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SETUPS  
HDMI Audio  
home  
A
“Settings”  
A
“Advanced Setup”  
A
“Audio”  
A
“HDMI Audio”  
Refer to the table below to see which setting you should choose.  
“HDMI Audio” setting  
A
“HDMI Normal”  
“PCM”  
“Off”  
“Blu-ray Disc Audio” setting “Primary Audio  
“Mix Audio  
Output”  
“Primary Audio  
Only”  
“Mix Audio  
Output”  
Regardless  
A
Only”  
Media  
ª
Audio Source  
Which audio format can be output depends on the compatibility of the  
connected device.  
ª
Dolby Digital  
or  
Dolby Digital  
or  
Dolby Digital  
PCM  
or  
Mute  
PCM  
or  
Mute  
PCM  
or  
Mute  
PCM  
or  
Mute  
Mute  
Mute  
Dolby Digital Plus  
or  
Dolby Digital  
Dolby Digital  
Dolby Digital Plus  
or  
or  
PCM*1  
or  
PCM*1  
or  
Mute  
PCM*1  
or  
Mute  
PCM*1  
or  
Mute  
Mute  
Dolby TrueHD  
or  
Dolby Digital  
Dolby Digital  
Dolby TrueHD  
or  
or  
PCM*2  
or  
PCM*2  
or  
Mute  
PCM*2  
or  
Mute  
PCM*2  
or  
Mute  
BD-video  
Mute  
Mute  
Mute  
DTS  
or  
PCM  
or  
Mute  
DTS  
or  
PCM  
or  
Mute  
DTS  
PCM  
or  
Mute  
PCM  
or  
Mute  
DTS-HD  
or  
DTS  
or  
DTS  
or  
DTS-HD  
LPCM  
PCM*3  
or  
PCM*3  
or  
PCM*3  
or  
PCM*3  
or  
Mute  
Mute  
Mute  
Mute  
Mute  
PCM  
or  
PCM  
or  
PCM  
or  
Mute  
PCM or Mute  
PCM or Mute  
2ch PCM or Mute  
2ch PCM or Mute  
PCM or Mute  
PCM  
or  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Dolby Digital  
DTS  
LPCM  
PCM  
Dolby Digital, PCM or Mute  
DTS, PCM or Mute  
2ch PCM or Mute  
2ch PCM or Mute  
DTS, PCM or Mute  
DVD-video  
Audio CD  
DTS-CD  
DTS  
*1  
*2  
*3  
) Only the independent substream is decoded.  
) Only the Dolby Digital substream is decoded.  
) Only the core substream is decoded.  
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the  
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.  
38 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUPS  
Digital Out  
EN  
home  
A
“Settings”  
A
“Advanced Setup”  
A
“Audio”  
A
“Digital Out”  
Refer to the table below to see which setting you should choose.  
“Digital Out”  
“Bitstream”  
setting A  
“PCM”  
“Blu-ray Disc Audio”  
“Primary Audio  
Only”  
“Primary Audio  
Only”  
“Mix Audio Output”  
“Mix Audio Output”  
setting A  
Media  
ª
Audio Source  
ª
Dolby Digital  
Dolby Digital Plus*1  
Dolby TrueHD*2  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
DownMix PCM  
BD-video  
DTS  
DTS  
DTS-HD*3  
LPCM  
DTS  
DTS  
DownMix PCM  
Dolby Digital  
DTS  
DownMix PCM  
Dolby Digital  
DTS  
DVD-video  
LPCM  
2ch PCM  
2ch PCM  
DTS  
2ch PCM  
Audio CD  
DTS-CD  
PCM  
DTS  
2ch PCM  
DownMix PCM  
*1  
*2  
*3  
) Only the independent substream is decoded.  
) Only the Dolby Digital substream is decoded.  
) Only the core substream is decoded.  
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the  
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.  
EN 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUPS  
3) After entering the PIN code, “Rating Level” appears.  
(If not, use [K / L] to select “Rating Level”.)  
Select desired rating level then press [OK].  
Parental  
home  
A
“Settings”  
A
“Advanced Setup”  
A
“Parental”  
Rating Level  
New PIN  
All  
8 [Adult]  
Some BD-video or DVD-video feature a parental lock level.  
Playback will stop if the ratings exceed the levels you set, it  
will require you to enter a password before the disc will  
playback. This feature prevents your children from viewing  
inappropriate material.  
7
6
5
4
3
2
1) With “Parental” selected in the “Advanced Setup”  
menu, press [OK].  
RATING EXPLANATIONS  
Language  
Video Output  
Audio  
Rating Level  
New PIN  
All  
• Parental Control is inactive; all discs  
can playback.  
8 [Adult]  
• DVD software of any grades (adult /  
general / children) can be played  
back.  
Parental  
Others  
7
6
[NC-17] No one under 17 admitted.  
[R] Restricted; under 17 requires  
accompanying parent or adult  
guardian.  
[PGR] Parental Guidance  
Recommended.  
[PG13] Unsuitable for children  
under 13.  
[PG] Parental Guidance suggested.  
[G] General Audience.  
• Suitable for children.  
2) If a PIN code has not been set, proceed to step 2-a).  
If a PIN code has already been set, proceed to step  
5
4
If you want to change the PIN code, proceed to  
If you forget the PIN code, proceed to step 2-d).  
2-a) Enter 4 digit PIN code using  
3
2
[Number buttons].  
Enter new PIN.  
1 [Kid Safe]  
To cancel parental lock temporarily  
Some discs allow you to cancel the parental lock  
temporarily. With those discs, the message below will  
appear when you try to play them back.  
“Please enter your PIN to unblock content”  
Follow the instruction which appears on the TV screen to  
cancel the parental lock. After entering the PIN code,  
“Rating Level” appears.  
• “4737” cannot be used.  
• Press [RED] to return to the previous screen.  
2-b) Enter 4 digit PIN code using  
[Number buttons].  
Select desired rating level, then press [OK].  
Enter your PIN.  
2-c) Follow step 2-b). Select “New PIN”, then press  
[OK]. Enter the new PIN code.  
2-d) Enter “4737”. Current PIN code and the “Parental”  
settings are now cleared. Follow step 1) and step  
2-a) to create a new PIN code.  
40 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SETUPS  
EasyLink (HDMI CEC)  
Network Connection  
Set up the network connection settings in order to use the  
BD-Live function with a BD-Live disc.  
EN  
“Advanced  
“EasyLink  
(HDMI CEC)”  
home A “Settings”  
A
A
“Others”  
A
Setup”  
EasyLink (HDMI CEC) function allows your TV (limited to  
PHILIPS brand EasyLink TV) to act in conjunction with this  
unit, or vice versa.  
Connection Test  
“Advanced  
Setup”  
“Network  
Connection”  
“Connection  
Test”  
home  
A
“Settings”  
A
A
“Others”  
A
A
When “EasyLink (HDMI CEC)” setting is set to “On”,  
functions listed below will be available.  
One Touch Play  
After you made IP address / DNS settings or when a LAN  
cable is connected, always perform the connection test to  
check if the connection is correctly made.  
When this unit is turned on, the TV also is turned on and  
the appropriate external input channel will be selected  
automatically. The appropriate external input channel  
can also be selected on your TV automatically when you  
press [B (play)], [S (previous)], [T (next)],  
[Number buttons], [ (home)], [INFO ],  
[TOP MENU], or [DISC MENU / POP-UP MENU] when  
the unit’s power is on.  
1) Use [K / L] to select “Settings” in the home menu,  
then press [OK].  
2) Use [K / L] to select “Advanced Setup”, then press  
[OK].  
3) Use [K / L] to select “Others”, then press [OK].  
4) Use [K / L] to select “Network Connection”, then  
press [OK].  
Standby  
5) Use [K / L] to select “Connection Test”, then press  
[OK].  
When you press and hold [Q (standby-on)] for 2  
seconds, it turns off the power of the TV first and then  
turns off the power of this unit also.  
System Information  
Connection test will start automatically and the test result  
will appear right after the connection test finishes.  
• “Testing... : The test is in progress.  
• “Pass” : Connection test is successfully completed.  
• “Fail” : Connection test failed. Check the connection  
settings.  
Get & Set Menu Language  
The unit recognizes the OSD language set for the TV and  
automatically sets the same language as the player  
menu language (OSD menu language) for this unit.  
Refer to the “Player Menu” on page 31 for available  
languages.  
• This feature is available only when “Auto” is selected in  
the “Player Menu” in the settings menu.  
Press [OK] to go to the list of network status confirmation  
screen.  
IP Address  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
then press 'OK'.  
Subnet Mask  
Default Gateway  
Primary DNS  
Secondary DNS  
6) Press [OK] to go back to the previous screen, or  
press [ (home)] to go back to the home menu.  
Note  
• If the connection test passes, you can enjoy the  
BD-Live functions using the Internet without making  
any extra settings.  
• If the connection test fails, you may need to change  
the MAC address settings of your router. You can  
check the MAC address of this unit on “Network  
EN 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
SETUPS  
If you select “Manual”, follow the following  
instruction to set the IP address and DNS.  
Enable(Easy)  
4-a) IP address setting screen will appear. Enter IP  
address, subnet mask and default gateway with  
cursor buttons and number buttons.  
“Advanced  
Setup”  
“Network  
Connection”  
“Enable  
(Easy)”  
home A“Settings” A  
A
“Others”  
A
A
Network settings are set to the following settings initially.  
(In most cases, you can connect to the Internet without  
making any changes to the default settings.)  
IP Address Setting  
IP Address  
- IP Address Setting  
- DNS Setting  
- Proxy Setting  
- Connection Speed  
- BD-Live Setting  
Auto(DHCP)  
Auto(DHCP)  
Do Not Use  
Auto  
Subnet Mask  
Default Gateway  
Allow  
Clear  
OK  
If you want to set the network settings back to the default  
settings as above (except “BD-Live Setting”), follow the  
procedure below.  
• Enter the IP address number after checking the  
specifications of your router.  
• If the IP address number is unknown, check the  
IP address number of other devices. (e.g. PC  
connected via LAN cable) and assign a different  
number from those of other devices.  
2) Use [K / L] to select “Enable(Easy)”, then press [OK].  
• The unit will start the connection test automatically  
and the test result will appear right after the test  
finishes.  
After you enter all correctly, press [OK] to go to the  
DNS setting screen.  
4-b) DNS setting screen will appear. Enter primary DNS  
and secondary DNS with cursor buttons and  
number buttons.  
• After the connection test finishes, press [OK] to go to  
network status confirmation screen.  
3) Press [OK] to activate the network settings and set  
the network connection automatically. [ (home)]  
to go back to the home menu.  
DNS Setting  
Primary DNS  
Secondary DNS  
Note  
• The setting of “BD-Live Setting” will not be set back  
to the default, even if you follow the procedure.  
Clear  
OK  
• Enter the numbers instructed by your Internet  
provider.  
• If the number is unknown, check the number of  
other devices (e.g. PC connected via LAN cable)  
and assign the same number.  
Enable(Custom)  
“Advanced  
Setup”  
“Network  
Connection”  
“Enable  
(Custom)”  
home A“Settings” A  
A
“Others”  
A
A
4-c) After you enter all correctly, press [OK].  
• Confirmation message will appear. Select “Yes”  
to complete the settings.  
In following cases, select “Enable(Custom)” to set each  
setting as necessary.  
- When connection test failed with the setting of  
“Enable(Easy)”.  
- When instructed by your Internet service provider to  
make specific settings in accordance with your  
network environment.  
IP Address  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
Is Setting OK?  
Yes  
Subnet Mask  
Default Gateway  
Primary DNS  
Secondary DNS  
IP Address Setting / DNS Setting  
No  
5) Press [BACK U] to go back to the previous screen,  
or press [ (home)] to go back to the home menu.  
2) Use [K / L] to select “Enable(Custom)”, then press  
[OK].  
3) Use [K / L] to select “IP Address Setting”, then press  
[OK].  
4) Use [K / L] to select the desired setting, then press  
[OK].  
“Auto(DHCP)”  
: If your router has DHCP server  
function, select “Auto(DHCP)”.  
“Manual”  
: If your router does not have DHCP  
server function, select “Manual”.  
42 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
After you enter all correctly, press [YELLOW] to go to  
the proxy port setting screen.  
Note  
EN  
4-b) Enter proxy port number with number buttons.  
• The range of input number is between 0 and 255.  
• If you enter a number larger than 255, the number  
will automatically be 255.  
Proxy Setting  
Proxy Port  
x
• The manually entered number will be saved even if  
you change the setting to “Auto(DHCP)”.  
Clear  
OK  
• When you enter a wrong number, press [RED] to  
cancel. (the number will be back to “0”.)  
• If you want to enter 1 or 2 digit number in one cell,  
press [B] to move on to the next cell.  
• If the entered IP address or the default gateway or  
primary DNS number is same as the default setting,  
IP address setting will be set to “Auto(DHCP)”. (The  
manually entered number will be saved).  
• When IP address setting is set to “Manual”, the  
setting of DNS setting will automatically be “Manual”  
and when IP address setting is set to “Auto(DHCP)”,  
you can set either “Auto(DHCP)” or “Manual” for DNS  
setting.  
4-c) After you enter all correctly, Press [YELLOW].  
• Confirmation message will appear. Select “Yes”  
to complete the settings.  
Proxy Address  
Proxy Port  
xxxxxxxxxxxxxxx  
xxxxx  
Is Setting OK?  
Yes  
No  
5) Press [BACK U] to go back to the previous screen,  
Proxy Setting  
or press [ (home)] to go back to the home menu.  
Note  
• The range of input number for the port number is  
between 0 and 65535. (If you enter a number larger  
than 65535, it will be regarded as 65535.)  
• For proxy port, the selected ports may be blocked  
and not be able to use depending on your network  
environment.  
2) Use [K / L] to select “Enable(Custom)”, then press  
[OK].  
3) Use [K / L] to select “Proxy Setting”, then press  
[OK].  
4) Use [K / L] to select the desired setting, then press  
• If the proxy address is entered with blank only, proxy  
server setting will be set to “Do Not Use”.  
[OK].  
• For default settings, select “Do Not Use”.  
• If you need to change the proxy setting as instructed  
by your Internet service provider to set the  
designated proxy address and port, select “Use”.  
If you select “Use”, follow the following instructions  
to set the proxy address and proxy port.  
4-a) Proxy address setting screen will appear.  
Enter proxy address.  
• The keyboard screen will appear.  
Proxy Setting  
Proxy Address  
xxxxxxxx_  
1
a
k
u
2
b
l
3
c
4
d
n
x
5
e
o
y
6
f
7
g
q
.
8
h
r
9
i
0
j
m
w
p
z
s
_
t
v
-
OK  
a/A/@  
Clear  
All Clear  
OK  
[K / L / s / B] : Move the highlight.  
[Number buttons] : Enter number.  
[OK] : Enter the highlighted number / word.  
*[RED] : Clear the entered number or word.  
[GREEN] : Clear all the entered numbers or words.  
[BLUE] : Switch between abc, ABC and @!?  
*[YELLOW] : Set the entered number or word.  
* These buttons can be used in other network settings.  
EN 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Connection Speed  
BD-Live Setting  
You can set connection speed as your preference. (The  
default setting is “Auto”.)  
You can limit the Internet access from the BD-Live  
functions. (The default setting is “Allow”.)  
2) Use [K / L] to select “Enable(Custom)”, then press  
2) Use [K / L] to select “Enable(Custom)”, then press  
[OK].  
[OK].  
3) Use [K / L] to select “Connection Speed”, then press 3) Use [K / L] to select “BD-Live Setting”, then press  
[OK].  
[OK].  
4) Use [K / L] to select the desired setting, then press  
4) Use [K / L] to select the desired setting, then press  
[OK].  
[OK].  
“Auto”:  
“Allow”:  
Set the appropriate connection speed automatically, in  
accordance with your network environment.  
Internet access is permitted from all BD-Live contents.  
“Limited Allow”:  
“10BASE Half”:  
Set the connection speed to “10BASE Half”.  
Internet access is permitted only for BD-Live contents  
which have content owner certificates. Internet access  
without the certificates are prohibited.  
“Prohibit”:  
“10BASE Full”:  
Set the connection speed to “10BASE Full”.  
Internet access is prohibited from all BD-Live contents.  
“100BASE Half”:  
5) Press [BACK U] to go back to the previous screen,  
Set the connection speed to “100BASE Half”.  
“100BASE Full”:  
Set the connection speed to “100BASE Full”.  
or press [ (home)] to go back to the home menu.  
Network Status  
5) Press [BACK U] to go back to the previous screen,  
You can check the status of network settings.  
or press [ (home)] to go back to the home menu.  
Note  
• Choose a connection speed in accordance with your  
network environment.  
2) Use [K / L] to select “Enable(Custom)”, then press  
[OK].  
• The network connection may be disabled depending  
on the device, when the settings are changed.  
3) Use [K / L] to select “Network Status”, then press  
[OK].  
• Network setting list will be displayed.  
• MAC address of this unit will be displayed in the list.  
4) Press [BACK U] to go back to the previous screen,  
or press [ (home)] to go back to the home menu.  
Disable  
“Advanced  
Setup”  
“Network  
Connection”  
home A“Settings” A  
A
“Others”  
A
A“Disable”  
Deactivate all the network connection and settings.  
2) Use [K / L] to select “Disable”, then press [OK].  
3) Use [K / L] to select “Yes”, then press [OK].  
4) Press [BACK U] to go back to the previous screen,  
or press [ (home)] to go back to the home menu.  
Note  
• The network connection can be reactivated by  
setting the network connection to “Enable(Easy)” or  
“Enable(Custom)”.  
44 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUPS  
Note  
Software Upgrade  
EN  
• Please do not unplug the AC power cord or LAN  
cable while executing the “Network Upgrade”.  
• All settings will remain the same even if you upgrade  
the software version.  
• The disc tray will open automatically after upgrading  
finishes. This is not a malfunction.  
Disc Upgrade  
“Advanced  
home A“Settings” A  
Setup”  
“Software  
Upgrade”  
“Disc  
Upgrade”  
A
“Others”  
A
A
You can upgrade the software by using disc.  
Reset to Factory Default  
2) Use [K / L] to select “Software Upgrade”, then  
press [OK].  
Initialize the setting, SD Memory Card or network setting.  
1) Use [K / L] to select “Settings” in the home menu,  
then press [OK].  
3) Use [K / L] to select “Disc Upgrade”, then press  
[OK].  
4) Use [K / L] to select “Yes”, then press [OK].  
5) Disc tray will open automatically.  
2) Use [K / L] to select “Factory Default”, then press  
[OK].  
3) Use [K / L] to select the desired setting, then press  
[OK].  
• Insert the disc for software upgrade and then press  
[A (open/close)].  
“Settings”:  
6) After completing loading disc, confirmation  
message will appear. Use [s / B] to select “Yes” and  
press [OK] to start upgrading.  
• It may take a while to complete the upgrading.  
7) After the disc upgrade finishes, this unit will restart  
and open the disc tray automatically. Remove the  
disc.  
All the settings except for the “Parental” and “Network  
Connection” setting will be reset to default.  
“Format SD Card” (Available only when an SD  
Memory Card is inserted):  
Initialize the SD Memory Card.  
“Local Storage”:  
Local storage for Player or SD card (Available only when  
an SD Memory Card is inserted) used for BD-Java will be  
initialized.  
Note  
“Network Settings”:  
the latest firmware version.  
Reset the network setting to the default.  
4) Use [K / L] to select “Yes”, then press [OK].  
• Confirmation message will appear. Press [OK] to  
complete the setting.  
• Please do not unplug the AC power cord while  
executing the “Disc Upgrade”.  
• All settings will remain the same even if you upgrade  
the firmware version.  
5) Press [BACK U] to go back to the previous screen,  
or press [ (home)] to go back to the home menu.  
Note  
Network Upgrade  
• Do not remove the SD Memory Card while executing  
the “Format SD Card” or “Local Storage” (SD card). It  
will damage the card.  
• “Format SD Card” and “Local Storage” (SD card) are  
not available when a Blu-ray Disc is in the unit.  
“Advanced  
Setup”  
“Software  
Upgrade”  
“Network  
Upgrade”  
home A“Settings” A  
A
“Others”  
A
A
You can upgrade the software by connecting the unit to  
the Internet.  
2) Use [K / L] to select “Software Upgrade”, then press  
[OK].  
3) Use [K / L] to select “Network Upgrade”, then press  
[OK].  
4) Use [K / L] to select “Yes”, then press [OK].  
• This unit will then start checking for the latest  
firmware version.  
5) Confirmation message will appear.  
Use [s / B] to select “Yes”, then press [OK].  
• The unit will start downloading the latest firmware  
version.  
6) When the download completes, confirmation  
message will appear. Press [OK].  
• The unit will start upgrading the firmware version.  
• It may take a while to complete the upgrading.  
7) After upgrading finishes, this unit will restart and  
open the disc tray automatically.  
EN 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TROUBLESHOOTING  
Problem  
Tip  
No reaction to the remote control.  
Connect the product to the power outlet.  
Point the remote control at the product.  
Insert the batteries correctly.  
Insert new batteries in the remote control.  
Turn on the TV.  
Set the TV to the correct external input.  
Select the correct video resolution using [HDMI] .  
Press and hold [B (play)] on the front panel for 5 seconds to change the  
setting back to its default.  
No video signal on the display  
device.  
No audio / video signal on the  
display device via HDMI cable.  
No high-definition video signal on  
the TV.  
If the unit is connected to the unauthorized display device with an HDMI  
cable, the audio / video signal may not be output.  
Does the disc contain high-definition video? High-definition video is not  
available when the disc does not contain it.  
Does the TV support high-definition video? High-definition video is not  
available when the TV does not support it.  
No audio signal from the  
loudspeakers of the TV.  
Assign the audio input of the TV to the corresponding video input.  
No audio signal from the  
loudspeakers of the audio system.  
Turn on the audio system.  
Set the audio system to the correct external input.  
Increase the volume level of the audio system.  
Cannot play back a disc.  
Make sure that the product supports the disc.  
Check the region code of the disc. This unit supports following region codes.  
-BD : “A”  
-DVD : “ALL” or “1” for BDP3010/F7 (USA / Canada)  
“ALL” or “4” for BDP3010/F8 (Mexico)  
For DVD-RW/-R, make sure that the disc is finalized.  
Clean the disc.  
SD Memory Card cannot be read.  
The format of the card does not match that accepted by this unit or the card  
is not compatible.  
Cannot play back JPEG files from a  
disc.  
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.  
The operation is not possible.  
in the upper right hand corner  
of the TV screen.  
Buttons do not work or the unit  
stops responding.  
To completely reset the unit, press and hold [Q (standby-on)] on the front  
panel for 10 seconds to shut down the unit or unplug the AC cord from the  
AC outlet for 5-10 seconds.  
Cannot find a JPEG file.  
Make sure that the selected group (folder) does not contain more than  
9,999 files for DVD, and 999 files for CD.  
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.  
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and  
the “EasyLink (HDMI CEC)” is set to “On”.  
Error message appears when I  
select “Auto” in the “Player Menu”.  
This error message may appear when your TV’s OSD language is not  
supported by this unit.  
46 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TROUBLESHOOTING  
Problem  
Tip  
Cannot connect to the network.  
Check if the LAN cable connection is properly made.  
Turn on the modem or broadband router.  
EN  
Check the network settings.  
Check if the broadband router and/or modem is correctly connected.  
Check the “BD-Live Setting”.  
Cannot connect to the network  
while my PC is connected to the  
network.  
Check the content of your Internet service contract to see if your Internet  
Service Provider prevents multiple terminals connecting at the same time.  
The capacity of the SD card  
decreased.  
The data may be written to the SD card when a BD-video that supports the  
virtual package is used and an SD card is in the slot.  
MPEG-2 video and audio on the SD MPEG-2 is noncompliant on this unit.  
card cannot be played back.  
The contents of the card cannot be The card is not compatible or the contents on the card may be damaged.  
read.  
Turn off and then turn the unit on again.  
Cannot use the BD-Live function or Incert an SD card with enough space(1GB or more).  
download of data does not perform  
properly.  
Check if an SD card is correctly inserted.  
Cannot play back BD-video(BD-  
ROM Profile 2.0).  
Insert an SD card(1GB or more) which is formatted on this unit.  
Some discs with BD-Live function require memory when playing back the  
content.  
Do not remove the card during playback.  
EN 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GLOSSARY  
Analog Audio  
Dolby Digital  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound. See also  
The system to compress digital sound developed by Dolby  
Laboratories. It offers you sound of stereo (2ch) or multi-  
channel audio.  
Dolby Digital Plus  
Dolby Digital Plus is the next generation digital audio  
compression technology developed as an extension to  
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel  
Aspect Ratio  
The width of a TV screen relative to its height.  
Conventional TVs are 4:3 (in other words, the TV screen is  
almost square); widescreen models are 16:9 (the TV screen surround sound output.  
is almost twice as wide as it is high).  
Dolby TrueHD  
Dolby TrueHD is a lossless coding technology developed  
BD-Live  
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0) which for next generation optical discs. Blu-ray Disc supports  
contains new functions (e.g. Internet connection), in  
addition to the BONUSVIEW function.  
7.1 multi-channel surround sound output.  
DTS (Digital Theater System)  
DTS is a multi channel surround sound system. You can  
Blu-ray Disc is a next generation optical video disc which is enjoy movie dynamic and realistic sound like movie  
Blu-ray Disc (BD)  
capable of storing much more data than a conventional  
DVD. The large capacity makes it possible to benefit from  
the features such as high-definition videos, multi-channel  
surround sounds, interactive menus and so on.  
theater. DTS surround sound technologies were  
developed by DTS, Inc.  
DTS-HD  
DTS-HD is a lossless coding technology developed as an  
extension of the original DTS Coherent Acoustics format.  
Blu-ray Disc supports 7.1 multi-channel surround sound  
output.  
Chapter  
Just as a book is split up into several chapters, a title on a  
BD-video or DVD-video is usually divided into chapters.  
Gateway  
Component Video Output  
IP address of the electronic devices (such as router) which  
Each signal of luminance (Y) and component (PB/CB, PR/CR) provide Internet access.  
is independent to output so that you can experience  
picture color as it is.  
HDMI (High Definition Multimedia Interface)  
A digital interface between audio and video source. It can  
transmit component video, audio, and control signal with  
one cable connection.  
Also, due to compatibility with progressive video (525p/  
480p), you can experience higher-density picture than that  
in interlace (525i/480i).  
Digital Audio  
Hub  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals  
(44,100 times a second for CD audio) by an analog-to-  
digital converter, generating a stream of numbers. On  
playback, a digital-to-analog converter generates an  
analog signal based on these numbers. See also “Sampling  
A device used for connecting multiple device to the  
network.  
IP Address  
A set of numbers which are assigned to devices  
participating in a computer network.  
DNS Server  
JPEG (Joint Photographic Experts Group)  
A server which translates Internet domain names into IP  
addresses.  
JPEG is a method of compressing still picture files. You can  
copy JPEG files on CD-RW/-R, DVD-RW/-R, BD-RE/-R or SD  
Memory Card from a computer and play back the files on  
this unit.  
48 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
GLOSSARY  
LAN (Local Area Network)  
Subnet Mask  
A group of computer networks covering a small area like a A mask which is used to determine what subnet an IP  
EN  
company, school or home.  
address belongs to.  
Local Storage  
Title  
A storage area of sub contents for playing virtual packages A collection of chapters on BD-video or DVD-video. See  
on BD-video.  
PCM (Pulse Code Modulation)  
Track  
The most common system of encoding digital audio,  
found on CD and DAT. Excellent quality, but requires a lot  
of data compared to formats such as Dolby Digital and  
MPEG audio. For compatibility with digital audio recorders  
(CD, MD and DAT) and AV amplifiers with digital inputs,  
this unit can convert Dolby Digital and MPEG audio to  
Audio CD uses tracks to divide up the content of a disc.  
The BD-video or DVD-video equivalent is called a chapter.  
Virtual Package  
The function which copies data to other media (local  
storage) from the Internet and play the secondary video,  
secondary audio and the subtitle at the same time. The  
method of the playback varies depending on discs.  
Proxy Server  
Proxy server is a server which acts as an intermediary  
between a workstation user and the Internet to ensure  
security.  
Region Code  
Regions associate discs and players with particular areas of  
the world. This unit will only play back discs that have  
compatible region codes. You can find the region code of  
your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
Router  
A networking device which distinguishes the IP address  
assigned to each device and routing and forwarding  
information in the computer network.  
Sampling Frequency  
The rate which sound is measured by a specified interval  
to turn into digital audio data. The numbers of sampling in  
one second defines as sampling frequency. The higher the  
rate, the better the sound quality.  
EN 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SPECIFICATIONS  
General  
Signal System  
NTSC Color  
Power requirements  
Power consumption  
120 V AC, 60 Hz  
20 W (standby: 0.5 W)  
Dimensions (width x height x depth) 14.2 x 2.0 x 8.5 inches (360 x 50 x 215 mm)  
Weight  
4.4 lbs. (2.0 kg)  
Operating temperature  
Operating humidity  
41°F (5°C) to 104°F (40°C)  
Less than 80 % (no condensation)  
Terminals  
SD card slot  
slot x 1  
Audio output (Analog)  
RCA jack x 2  
L/R: 2 Vrms (output impedance: more than 1k)  
Video output  
RCA jack x 1  
1 Vp-p (75)  
Component video output  
RCA jack x 3  
Y: 1 Vp-p (75)  
PB/CB: 700 mVp-p (75)  
PR/CR: 700 mVp-p (75)  
Audio output (Digital)  
RCA jack x 1  
500 mVp-p (75)  
HDMI output  
HDMI jack x 1  
Video: 480p, 720p, 1080i, 1080p/Audio  
10BASE-T / 100BASE-TX  
LAN terminal  
Note  
• The specifications and design of this product are subject to change without notice.  
50 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ONE (1) YEAR LIMITED WARRANTY  
WARRANTY COVERAGE:  
This warranty obligation is limited to the terms set forth  
below.  
a part that has been modified without written permission,  
or (d) if any serial number has been removed or defaced,  
or (e) product, accessories or consumables sold “AS IS”  
without warranty of any kind by including refurbished Philips  
product sold “AS IS” by some retailers.  
EN  
WHO IS COVERED:  
This product is warranted to the original purchaser or the per-  
son receiving the product as a gift against defects in materials  
and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of the company.  
WHAT IS COVERED:  
This warranty covers new products if a defect in material  
or workmanship occurs and a valid claim is received within  
the Warranty Period. At its option, the company will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or  
most comparable to the original product in current inventory,  
or (3) refund the original purchase price of the product.  
The Company warrants replacement products or parts provided  
under this warranty against defects in materials and workmanship  
from the date of the replacement or repair for ninety (90) days  
or for the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product or  
part is exchanged, any replacement item becomes your property  
and the replaced item becomes the company’s property. When a  
refund is given, your product becomes the company’s property.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Product lost in shipment and no signature verification receipt  
can be provided.  
Failure to operate per Owner’s Manual.  
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,  
PUERTO RICO, OR U.S. VIRGIN ISLANDS...  
Contact Customer Care Center at:  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all  
requirements can result in delay.  
1-866-309-0866  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
WHAT IS NOT COVERED - EXCLUSIONS AND  
LIMITATIONS:  
This Limited Warranty applies only to the new products that  
can be identified by the trademark, trade name, or logo affixed  
to it. This Limited Warranty does not apply to any non-Philips  
hardware product or any software, even if packaged or sold  
with the product. Non-Philips manufacturers, suppliers, or  
publishers may provide a separate warranty for their own  
products packaged with the bundled product.  
The Company is not liable for any damage to or loss of any  
programs, data, or other information stored on any media  
contained within the product, or any non-Philips product or  
part not covered by this warranty. Recovery or reinstallation  
of programs, data or other information is not covered under  
this Limited Warranty.  
Some states do not allow the exclusions or limitation of incidental  
or consequential damages, or allow limitations on how long  
an implied warranty lasts, so the above limitations or exclusions  
may not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-Philips product,  
(b) to damage caused by service performed by anyone other  
than an Authorized Service Location, (c) to a product or  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
P&F USA, Inc.  
PO Box 430 Daleville, IN 47334-0430  
EN 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
P&F USA, Inc.  
PO Box 430 Daleville, IN 47334-0430  
P&F Mexicana, S.A. de C.V.  
Av. La Palma No. 6, Col. San Fernando La Herradura,  
Huixquilucan Edo. de México C.P. 52787  
Meet Philips at the Internet  
BDP3010/F7  
BDP3010/F8  
CLASS 1  
LASER PRODUCT  
ENERGIA  
BDP3010  
120 V ~ 60 Hz 20 W  
Comercializado por :  
IMPORTADOR:  
P&F Mexicana, S.A. DE C.V.  
Sojitz Mexicana, S.A. de C.V.  
Av. Paseo de las Palmas no. 239-302  
Col. Lomas de Chapultepec, c.p. 11000  
México, D.F.  
52 (55) 5202 - 7222  
EXPORTADOR :  
País de Origen :  
FUNAI ELECTRIC CO. L.T.D.  
CHINA  
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO  
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO  
ANTES DE USAR SU APARATO.  
Printed in China  
JpnYN-0930/F7-3  
1VMN27974★★★  
E5P30UD_E5P31UD  
E5P32MD_E5P33MD  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Paxar Printer Monarch 9416 User Manual
Peerless Industries TV Mount HP450 User Manual
Pelco DVR DX7100 User Manual
Philips Microphone SBCMD650 User Manual
Philips VCR SVA102 User Manual
Pioneer Cassette Player KEH P2800R User Manual
Pioneer DVD Player DVH 390MP User Manual
Polk Audio DVD Player DR 3 User Manual
Polycom Conference Phone IP 600 SIP User Manual
Prince Castle Electric Grill 161 User Manual