Register your product and get support at
CD150
SE150
GB Telephone
!
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1
Important
3
3
3
4
4.3
End a call
14
1.1
1.2
1.3
1.4
1.5
1.6
Power requirements
Safety Information
Conformity
5
Use more of your phone 15
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Switch the handset on/off
Keypad lock/unlock
Text or number entry
Call in progress
15
15
15
15
16
17
18
19
21
Using GAP standard compliance4
Recycling and disposal
Electric, Magnetic and
4
Using your phonebook
Using the redial list
Using the call log
Using the intercom
Paging
Electromagnetic Fields ("EMF") 5
2
Your phone
6
6
7
9
9
2.1
2.2
2.3
2.4
What’s in the box
Overview of your phone
Display icons
6
Personal settings
Change the handset name
Handset Tone
22
22
22
Overview of the base station
6.1
6.2
6.3
6.4
3
Getting started
Connect the base station
Wall mounting the base
Install your phone
Welcome mode
10
10
10
11
12
13
3.1
3.2
3.3
3.4
3.5
Change the display language 23
Activate/deactivate auto
hang-up
23
7
Clock and Alarm
Set date and time
Set date/time format
Set alarm
24
24
24
24
25
Menu structure
7.1
4
Using your phone
Make a call
14 7.2
4.1
4.2
14
14
7.3
7.4
Answer a call
Set alarm tone
Table of contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
8
Advanced settings
Change Master PIN
Registration
26
26
26
27
27
27
28
28
28
28
29
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
Unregister
Country selection
Reset unit
Set prefix
Change recall time
Change the dial mode
Set first ring
8.10 Default settings
9
Technical data
30
10
Frequently asked
questions
31
33
11
Index
2
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
recommended by Philips: risk of
explosion.
Always use the cables provided with
the product.
1
Important
•
Take time to read this user manual before
you use your phone. It contains important
information and notes regarding your
phone.
1.2
Safety Information
•
This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the set.
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
Active mobile phones in the vicinity
may cause interference.
Do not open it as you could be
exposed to high voltages.
Do not allow the charger to come into
contact with liquids.
About operating and storage
temperatures:
1.1
•
Power requirements
This product requires an electrical
supply of 220-240 volts AC. In case of
power failure, the communication can
be lost.
The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical outlet
is always easily accessible.
The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
EN 60-950.
Use only power supplies listed in the
user-instructions
List of applicable power supplies
(manufacturer/model):
Electronic Sales Ltd. - IW506 or
TR506 (for CD/SE150)
Electronic Sales Ltd. - IW156 or
TR156 (for charger pod)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Operate in a place where temperature
is always between 0 and 35º C (32 to
95º F).
Store in a place where temperature is
always between -20 and 45º C (-4 to
113º F).
!
Warning
To avoid damage or malfunction:
•
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
Never use any other battery than the
one delivered with the product or
•
Battery life may be shortened in low
temperature conditions.
Important
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3
Conformity
1.5
Recycling and disposal
We, Philips declare that the product is in
compliancewiththeessentialrequirements
and other relevant provisions of Directive
1999/5/EC. This product can only be
connected to the analogue telephone
networks of the countries mentioned on
the packaging.
Disposal instructions for old products:
The WEEE directive (Waste Electrical
and Electronic Equipment Directive ;
2002/96/EC) has been put in place to
ensure that products are recycled using
best available treatment, recovery and
recycling techniques to ensure human
health and high environmental protection.
Your product is designed and
You can find the Declaration of
manufactured with high quality materials
and reused.
Do not dispose of your old product in
your general household waste bin.
Inform yourself about the local separate
collection system for electrical and
electronic products marked by this
symbol.
1.4
Using GAP standard
compliance
The GAP standard guarantees that all
DECT GAP handsets and base stations
TM
comply with a minimum operating
standard irrespective of their make.Your
handset and base station are GAP
compliant, which means the minimum
guaranteed functions are:
register a handset, take the line, receive a
call and dial.The advanced features may
not be available if you use another
handset other than your new phone with
your base station.
To register and use your new phone with
a GAP standard base station of a different
make, first follow the procedure
described in the manufacturer’s
instructions, then follow the procedure
described on page 26.
To register a handset of another make to
your new phone's base station, place the
base station into registration mode
(page 26), then follow the procedure in
the manufacturer’s instructions.
Use one of the following disposal options:
•
Dispose of the complete product
(including its cables, plugs and
accessories) in the designated WEEE
collection facilities.
•
If you purchase a replacement
product, hand your complete old
product back to the retailer. He
should accept it as required by the
WEEE directive.
4
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal instructions for batteries:
Batteries should not be
disposed of with general
household waste.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
Packaging information:
Philips has marked the packaging with
standard symbols designed to promote
the recycling and appropriate disposal of
your eventual waste.
A financial contribution has been
paid to the associated national
recovery & recycling system.
The labelled packaging material is
recyclable.
1.6
Electric, Magnetic and
Electromagnetic Fields
("EMF")
1. Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Important
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
2.1
What’s in the box
Handset
Base station with
bracket
Battery door
Line cord*
2 AAA rechargeable
NiMH batteries
Power supply
User manual
Note
Guarantee
Quick start guide
*You may find in the box the line adaptor delivered separately from the line cable. In
this case, you have to connect the line adaptor to the line cord first before
plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
6
Your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
D
Navigation keys
:
2.2
Overview of your phone
In idle mode: Scroll up to access the Call log
and scroll down to access the Phonebook.
During a call: Scroll up/down to increase or
decrease earpiece volume.
In other modes: Scroll up/down a menu list
or go to the previous or next record.
E
Talk key
r
In idle mode: Answer an incoming
external or internal call.
In phonebook/call log/redial list reviewing
mode: Dial the selected number.
F
Hang-up/Exit key
e
In idle mode: Long press to switch on/off
the handset.
During a call: Hang up a call.
In other modes: Short press to return to
idle mode.
G
Menu key
m
v
l
In idle mode: Access the main menu.
Flash key
H
During a call: Activate the recall function.
Redial key
I
In idle mode: Access the Redial list.
In direct dialing mode: Dial the last dialed
number.
J
Keypad lock
*
In idle mode: Insert *. Long press to lock/
unlock keypad.
A
B
Earpiece
OK key
<
During a call: Switch from pulse dialing to
tone dialing.
In other modes: Select the function
displayed on the handset screen directly
above it.
K
Ringer off key
#
In idle mode: Insert #. Long press to turn
the ringer on/off.
C
Back/Clear key
c
In text or number editing mode: Short
press to delete one digit/character.
In other modes: Select the function
displayed on the handset screen directly
above it.
During a call: Insert #. Long press to insert
a pause.
Your phone
7
Download from Www.Somanuals.com. All Manuals Search And Download.
O
Battery door
L
Mute key
M
During a call: Mute/unmute the handset
microphone.
M
Call transfer/Intercom key
i
In idle mode: Initiate an internal call.
During a call: Hold the line and page
another handset or toggle between an
external and internal call. Long press to
initiate a conference call.
N
Microphone
8
Your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3
Display icons
A
Status bar
Indicates battery is fully
B
OK key
Displays when in menu mode to confirm
your selection.
charged.
Indicates battery is fully
discharged.
Indicates that an external call
is connected or held. Icon
blinks when receiving an
incoming call.
C
key
Indicates that more options are available.
Use the navigation keys to scroll up/down.
Increase
volume during a call.
BACK key
or Decrease
earpiece
D
Indicates new voice messages
received. Icon blinks when
there are unread messages.
Displays when the call log is
accessed. Icon on when
there are new missed calls.
Displays when the
Displays when in menu mode. Select
BACK to return to the previous menu
level. Select BACK to delete the last digit/
character entered.
2.4
Overview of the base station
phonebook is accessed.
Displays when the alarm
clock is activated.
Displays when ringer off is
activated.
Indicates that the handset is
registered and within range
of the base station. Icon
blinks when the handset is
out of range or is searching
for a base.
A
Paging key
V
Page handset.
Long press to start registration procedure.
Your phone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
The line adaptor may not be attached to the
line cord. In this case, you have to connect
the line adaptor to the line cord first before
plugging the line cord to the line socket.
3
Getting started
3.1
1
Connect the base station
Place the base station in a central
location near the telephone line
socket and electricity socket.
!
Warning
Avoid placing the base station too close to
large metal objects such as filing cabinets,
radiators or electrical appliances. This can
impair the range and sound quality.
Buildings with thick internal and external
walls may impair transmission of signals to
and from the base.
!
Warning
The base station does not have an ON/OFF
power switch. Power is applied when the
power adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line cord
have to beconnected correctly, asincorrect
connection could damage the unit.
Connect the line cord and the
power cable to their corresponding
connectors at the back of the base
station.
2
Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
3.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
!
Warning
Other wall mounting methods are not
recommended and may damage the
product.
Connect the other end of the line
cord and power cable to their
respective sockets.
3
Remove the bracket from the back
of the base station by pressing down
the two latches on the top of the
1
10
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
3.3.1 Install battery
!
Warning
Always use AAA rechargeable batteries
supplied with your unit. There could be
risk of battery leakage if you use alkaline
batteries or other battery types.
bracket.
Turn the bracket upside down and
then re-insert the bracket to the
back of the base station.
2
Slide out the battery cover.
1
Place the batteries in the correct
polarity as indicated and replace the
cover.
2
Insert screws (not included) into the
wall.
3
Align the mounting holes on the
back of the base with the screws on
the wall.
4
5
3.3.2 Charge battery
!
Warning
Slide the base down into place.
The handset must be charged for at least 24
hours before using it for the first time.
When the battery level becomes low, the
low battery sensor alerts you by sounding an
audible tone and blinking the battery icon.
If the battery level becomes exceedingly
low, the phone automatically switches off
shortly after the alert and any function in
progress will not be saved.
Getting started
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Placethehandsetonthechargingcradle
of the base station. A beep is emitted if
the handset is placed correctly.
Scroll : to find your country.
1
2
3
Press <
.
Press <OOKK to confirm your
The battery icon
blinks during charge.
The battery icon
on the display
2
3
selection.
•
The default line settings and menu
language for the selected country
will be automatically configured.
becomes steady
when the handset is fully charged.
Note
Tip
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the phone
is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
You may change your country settings
anytime after the first configuration. (see
“Country selection” in chapter 8.4)
If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
idle mode automatically when you place
the handset back on the base station.
icon
will blink.
Tip
When reaching the range limit and the
conversation becomes crackly, move
closer to the base.
3.4
Welcome mode
Before you first use your handset, you
need to configure it according to the
country of use. After charging it for a few
minutes, the word WELCOME appears in
various languages. Follow these steps to
configure your phone:
Note
Depending on your country, the
WELCOME screen may not appear. In this
case, you are not required to select your
country/operator/language settings.
You can still make outgoing calls or receive
incoming calls without first defining your
country selection.
Press <OK key to display a list of
1
countries.
12
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5
Menu structure
The table below describes the menu tree of your phone.
Press m key to display the main menu. Use navigation keys : to navigate within
the menus and press < key to enter each option.
PHONEBOOK
NEW ENTRY
LIST
Phonebook entries
EDIT ENTRY
DELETE ENTRY
DELETE ALL
DIRECT MEM.
HANDSET NAME
HANDSET TONE
KEY 1/2
PERSONAL SET
RING VOLUME
OFF/LEVEL 1/LEVEL 2/LEVEL 3/
LEVEL 4
RING TONES
KEY BEEP
Melody list
ON/OFF
LANGUAGE
Language list
ON/OFF
AUTO HANG-UP
DATE/TIME
CLOCK&ALARM
SET FORMAT
TIME FORMAT
DATE FORMAT
12 HOURS/24 HOURS
DD/MM
MM/DD
ALARM
OFF/ON ONCE/ON DAILY
MELODY 1/2/3
ALARM TONE
CHANGE PIN
REGISTER
ADVANCED SET
UNREGISTER
COUNTRY
RESET
Country list
AUTO PREFIX
RECALL TIME
DIAL MODE
FIRST RING
DETECT DIGIT
SHORT/MEDIUM/LONG
TONE/PULSE
PREFIX
ON/OFF
Getting started
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll : to a phonebook entry.
2
3
Press r key.
4
Using your phone
•
The call is initiated.
Tip
4.1
Make a call
Instead of scrolling : to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate. For
example, pressing 2 will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc...
4.1.1 Predialling
Dial the number (maximum 24 digits).
1
2
Press r key.
•
The call is initiated.
Tip
You may insert a prefix number to the
beginning of your predial number, see “Set
prefix” on chapter 8.6 for more information.
4.2
Answer a call
Danger
When the handset rings during an incoming
call, please do not hold the handset too
close to your ear as the volume of the
ringing tone may damage your hearing.
When the phone rings, press r key.
4.1.2 Direct dialling
Press r key to take the line.
1
2
Dial the number.
•
The call is initiated.
•
The call is established.
4.1.3 Call from redial list
Note
Press l key in idle mode.
1
2
3
Incoming call has priority over other events.
Whenever there is an incoming call, other
status in progress such as phone setting,
menu navigation, etc will be aborted.
Scroll :to an entry in the redial list.
Press r key.
•
The call is initiated.
4.3
To end a conversation, press e key.
The call ends.
End a call
4.1.4 Call from the call log
Press u in idle mode.
1
2
3
•
Scroll :to an entry in the call list.
Tip
Press r key.
You can simply place the handset back to its
base station to end the call (see “Activate/
deactivate auto hang-up” on chapter 6.4).
This feature is activated by default.
•
The call is initiated.
Note
You need to subscribe to Caller Line
Identification service to be able to see the
caller’s number or name in the call log.
(see “Access call log” on chapter 5.7.1)
Note
The call duration (HH-MM-SS) will be
displayed on the handset screen for about
10 seconds. Press cBACK.to return to
idle mode.
4.1.5 Call from the phonebook
Press d in idle mode.
1
14
Using your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
T U V 8 ?
8
9
0
#
*
5
Use more of your
phone
W X Y Z 9
0 - / \ # +
5.1
Switch the handset on/off
#
*
Press and hold e key for more than 5
seconds to switch on/off the handset in
idle mode.
Tip
5.2
Keypad lock/unlock
Press cBACK to delete the last digit or
Press and hold * key for 1 second to
character entered.
lock/unlock the keypad in idle mode.
5.4
Call in progress
Some options are available to you during a
call. The available options are:
5.3
Text or number entry
When you select a field in which you can
enter text, you can enter the letters that
are printed on the keys by pressing the
relevant key once or several times. For
example, to enter the name “PAUL”:
5.4.1 Adjust earpiece volume
During a call, press : to select from
VOLUME 1 to VOLUME 3
.
Press 7 once:
P
1
2
3
4
5.4.2 Mute/unmute microphone
When the microphone is muted, your
correspondent cannot hear you.
Press 2 once: PA
Press 8 twice: PAU
Press 5 three times: PAUL
During a call, press Mkey to turn
1
The table below gives you the character
assignment during text or number entry:
off the microphone.
Press M key again to turn on the
2
Keys
Assigned characters
microphone.
space 1 _ < > *
1
5.4.3 Call waiting
A B C 2
D E F 3
G H I 4
J K L 5
If you have subscribed to Call Waiting
service, the earpiece will emit a beep tone
to inform you that there is a second
incoming call. The number or name of the
second caller will also be displayed on your
phone if you have subscribed to Caller
Line Identification service (CLI). Please
contact your network provider for more
2
3
4
5
6
7
M N O 6
P Q R S 7
information on this service
.
When you receive a second incoming call
Use more of your phone
15
Download from Www.Somanuals.com. All Manuals Search And Download.
while on the phone, press v+2key
to put the current call on hold and
answer the second call.
5.5.2 Access phonebook
Press d in idle mode to browse the
1
phonebook entries. Alternatively,
OR
you can press m key, scroll :
- Press v+1key to end the current
call and answer the second call.
- Press v+2subsequently to toggle
between these 2 calls.
The above operations may be different
according to your network.
to PHONEBOOK and press <
,
.
scroll :to LIST and press <OOKK
•
The phonebook entries will be listed
in alphabetical order.
To view the details, press <OK.
Tip
2
5.5
Using your phonebook
Instead of scrolling : to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate. For
example, pressing 2 will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc...
Your phone can store up to 50 phonebook
memories. Each phonebook entry can
have a maximum of 24 digits for the phone
number and 12 characters for name.
5.5.1 Store a contact in the
phonebook
1
5.5.3 Modify a phonebook entry
Press m key in idle mode, scroll
Press m key in idle mode, scroll
1
: to PHONEBOOK and press
: to PHONEBOOK and press
<OK, scroll : to EDIT ENTRY
and press <OK.
<OK. Press <OK again to enter
NEW ENTRY
.
ENTER NAME is displayed on the screen.
Enter the name of the contact
(maximum 12 characters) and press
<OK.
2
3
Scroll :to select an entry to edit.
2
3
Press <OK to display name. Edit
the name and press <OK.
Edit the number and press <OK to
4
ENTER NUMBER is displayed on the
screen.
4
5
confirm.
•
A validation tone is emitted.
Enter the number (maximum 24
digits) and press <OK to confirm.
5.5.4 Delete a phonebook entry
•
A validation tone is emitted.
Press m in idle mode, scroll :
1
Note
to PHONEBOOK and press <OK
,
Press cBACK to delete the last digit or
scroll : to DELETE ENTRY and
press <OK.
character entered.
To return to idle mode, press e key.
Scroll : to select an entry to
delete and press <OK.
DELETE?
2
3
Tip
You cannot store a new phonebook entry
when the memory is full. In this case, you
have to delete existing entries to make
space for new entries.
Press <is displayed on the screen.
OK again to confirm
deletion.
•
A validation tone is emitted.
16
Use more of your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Scroll : to select EDIT NUMBER
and press <OK.
4
5
6
7
Press cBACK to discard change and the
screen returns to previous menu.
Enter the number (maximum 24
digits) and press <OK to confirm.
ENTER NAME is displayed on the
screen.
5.5.5 Delete the phonebook list
Press m key in idle mode, scroll
1
Enter the name of the contact
(maximum 12 characters) and press
<OK.
: to PHONEBOOK and press
<OK.
Scroll : to DELETE ALL and
2
•
A validation tone is emitted.
press <OK.
DELETE?
Press <OisKdiasgpalainyetdoocnontfhiremscdreeleenti.on.
3
5.5.6.2
Delete direct access
memory
•
A validation tone is emitted.
Press m key in idle mode, scroll
: to PHONEBOOK and press
<OK, scroll :to DIRECT MEM.
and press <OK.
1
Note
Press cBACK to discard change and the
screen returns to previous menu.
Scroll : to KEY 1 or KEY 2 and
press <OK.
2
5.5.6 Direct access memory
There are 2 direct access memories
(Keys 1 and 2) included in the
phonebook memory. A long press on the
keys in idle mode will automatically dial
the stored phone number.
•
The stored number is displayed (if
any).
Press <OK to enter direct
3
4
5
memory menu.
Scroll : to DELETE and press
<OK.
5.5.6.1
Add/edit direct access
memory
CONFIRM? is displayed on the
screen. Press <OK to confirm
deletion.
Press m key in idle mode, scroll
: to PHONEBOOK and press
<OK, scroll :to DIRECT MEM.
and press <OK.
1
2
3
•
A validation tone is emitted and the
screen returns to previous menu.
Scroll : to KEY 1 or KEY 2 and
press <OK.
5.6
Using the redial list
The redial list stores the last 5 numbers
dialed. A maximum of 24 digits can be
displayed for each entry.
•
The stored number is displayed (if
any).
If there is no number stored for the
selected key or if you want to
change the number currently stored,
press m to enter direct memory
menu.
5.6.1 Access redial list
Press l key to go to the redial
1
list and scroll : to browse the
redial list.
Use more of your phone
17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The last number dialed will appear
first in the redial list. If the redial
number matches a phonebook
entry, the name will be displayed
instead.
5.6.4 Delete the redial list
Press l key in idle mode to go to
1
the redial list and press m, scroll
to DELETE ALL and press <OK
.
CONFIRM? is displayed on the
screen.
2
To view the details, press <OK key.
Note
To return to idle mode, press e key.
2
Press <OK to confirm deletion.
•
A validation tone is emitted and the
screen returns to redial list.
5.6.2 Save a redial number into
the phonebook
Note
Press cBACK to discard change and the
Press l key in idle mode to go to
1
screen returns to redial list.
the redial list, scroll :to select an
entry and press <OK. Press m
5.7
Using the call log
again to enter SAVE NUMBER
.
The call log stores the last 10 external calls
and any new voice mail received. If you
have subscribed to Caller Line
Identification (CLI), and provided the
identity of the caller is not withheld, the
name (or number) of the caller will be
displayed.
ENTER NAME is displayed on the
screen.
2
3
Enter the name of the contact
(maximum 12 characters) and press
<OK.
•
SAVED ! is displayed for 2 seconds
and the screen returns to redial list.
Note
Note
If the identity of the caller is withheld or
the network does not provide the date
and time information, then the information
will not be displayed in the call log.
If you have not subscribed to Caller Line
Identification service, there will not be
any information displayed in the call log.
Press cBACK to delete the last digit or
character entered.
5.6.3 Delete a redial number
Press l key in idle mode to go to
1
the redial list, scroll :to select an
entry and press m.
Scroll : to DELETE and press
2
5.7.1 Access call log
<OK.
Press u in idle mode and scroll :
1
DELETE?
Press <OisKditsoplcaoyendfiromndtheeletsicorne.en.
3
to browse the call log.
•
The calls (missed and received) are
displayed in chronological order
with the most recent call at the top
of the list.
•
A validation tone is emitted and the
screen returns to redial list..
Note
Press cBACK to discard change and the
screen returns to redial list.
18
Use more of your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Press <OK to display the details
(name, number, date and time of the
call). Press m to enter call log
menu.
2
5.7.4 Delete a call list entry
Press u in idle mode, scroll :to
1
a call list entry and press m.
Scroll : to DELETE and press
2
<OK to confirm deletion.
5.7.2 Consulting the call list
The screen can either display :
the caller’s number*
the caller’s name (if recorded in the
phonebook)*
•
A validation tone is emitted and the
screen returns to call log.
•
•
Note
Press cBACK to discard change and the
screen returns to call log.
•
•
<
<
WITHHELD> if it is a private call.
UNAVAILABLE> if it is a public or
5.7.5 Delete the call list
out of area call.
Press u in idle mode, scroll :to
1
*
Subject to a subscription with your
a call list entry and press m.
network operator. If Caller Line
Identification (CLI) is not subscribed, there
will be no entries in the call log.
Scroll : to DELETE ALL and
2
press <OK.
CONFIRM? is displayed on the
screen.
3
Note
You can display the phone number, the
time and the date of the call by pressing
<OK. The time and date displayed is
dependent on the network.
Press <OK again to confirm
deletion.
•
A validation tone is emitted and the
screen returns to call log.
Note
5.7.3 Save call list entry into the
phonebook
Press cBACK to discard change and the
screen returns to call log.
Press u in idle mode, scroll :to
1
a call list entry and press m.
5.8
!
Using the intercom
Warning
Intercom and call transfer is only possible
with handsets registered to the same base
station.
Scroll : to SAVE NUMBER and
2
press <OK.
ENTER NAME is displayed on the
screen.
3
4
Enter the name of the contact
(maximum 12 characters) and press
<OK.
This feature is only available when there are
at least 2 registered handsets. It allows you
to make free internal calls, transfer external
calls from one handset to another and use
the conference option.
•
SAVED ! is displayed for 2 seconds
and the screen returns to call log.
Note
Press cBACK to delete the last digit or
character entered.
Use more of your phone
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
5.8.1 Intercom another handset
If there is no answer from the called
handset, press i key to resume the
external call.
Note
If the handset does not belong to your new
phone range, this function may not be
available.
5.8.3 Answer an external call
during intercom
Press i key in idle mode.
1
•
Intercom is established immediately if
there are only 2 registered handsets.
During intercom, a new call tone is
emitted when there is an incoming
external call.
1
If there are more than 2 registered
handsets, the handset numbers
which are available for intercom will
be displayed. Press the specific
handset number you wish to call to
start intercom.
2
Press rto answer the external call
2
and end the intercom.
•
Connection with the external call is
established.
Note
To put the internal call on hold and answer
the incoming external call, press ikey.
5.8.2 Transfer an external call to
another handset
During the call, press and hold i
1
5.8.4 Switch between an internal
and external call
key to put the external call on hold
(the caller can no longer hear you).
During the call, press i key to switch
•
Intercom is established immediately if
there are only 2 registered handsets.
between an internal or external call.
If there are more than 2 registered
handsets, the handset numbers
which are available for intercom will
be displayed. Press the specific
handset number you wish to call to
start intercom.
Press r key on the called handset
to answer the internal call, where
both internal callers can talk.
2
5.8.5 Establish a three-party
conference call
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
3
4
During the call, long press i key
1
to put the external call on hold (the
caller can no longer hear you).
•
Intercom is established.
Press ekey on the first handset to
transfer the external call to the
called handset.
If there are more than 2 registered
handsets, the handset numbers
which are available for intercom will
be displayed. Press the specific
handset number you wish to call to
start intercom.
2
•
The external call is transferred.
20
Use more of your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Press r key on the called handset
to answer the internal call, where
both internal callers can talk.
3
4
•
Intercom is established.
Press and hold i key for 2
seconds on the first handset to start
the three-party conference.
•
CONFERENCE will be displayed on
the screen once the conference call
is established.
5.9
Paging
The paging feature enables you to locate
a missing handset if the handset is in range
and contains charged batteries.
Press V key on the base station.
1
•
All the registered handsets start to
ring.
Once retrieved, press any key on the
handset to end the paging.
2
Note
If there are no key presses within 30
seconds, the handset and base station will
automatically return to idle mode.
Tip
Press V key on the base station again
to stop paging.
Use more of your phone
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll : to your desired volume
2
level and press <OK to confirm.
6
Personal settings
•
A validation tone is emitted and the
screen returns to previous menu.
6.1
Change the handset name
Note
You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is PHILIPS
When RINGER OFF is activated, the icon
will be displayed on the screen.
.
Press m key in idle mode, scroll
1
6.2.2 Set the ring melody
There are 10 ring melodies available on
your handset.
: to PERSONAL SET and press
<OK, scroll : to HANDSET
NAME and press <OK
.
Press m key in idle mode, scroll
1
The last stored name is displayed.
Press cBACK key to delete the
characters one by one.
2
3
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONE, scroll : to
Enter the new name (maximum 10
characters) and press <OK to
confirm.
RING TONES and press <OK
.
Scroll : to your desired melody
2
3
to play the melody.
•
A validation tone is emitted and the
screen returns to previous menu.
Press <OK to set the ring tones.
•
A validation tone is emitted and the
screen returns to previous menu.
6.2
Handset Tone
6.2.3 Activate/deactivate key
tone
6.2.1 Set the ring volume
Danger
A single tone is emitted when a key is
pressed. You can enable or disable the
key tone. By default, the key tone is ON
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONE, scroll : to
There are 5 ringer volume options (OFF
LEVEL 1 LEVEL 2 LEVEL 3 and LEVEL 4).
The default level is LEVEL 2
,
KEY BEEP
OK.
Scroll :atnod press <
ON or OFF and press
,
,
2
.
<OK to confirm.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, press <OK to enter
1
•
A validation tone is emitted and the
screen returns to previous menu.
HANDSET TONE and press <OK
again to enter RING VOLUME
.
22
Personal settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3
Change the display language
Your handset can support different
display languages, depending on your
country selection during the WELCOME
mode.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, scroll : to LANGUAGE
and press <OK.
Scroll :to your desired language
2
and press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Tip
Once the display language is set, the
option menus on the handset will switch
to display in the selected language
immediately.
6.4
Activate/deactivate auto
hang-up
This function enables you to end a call
automatically by simply placing the
handset on the base station. By default,
the Auto Hang up feature is ON
.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, scroll : to AUTO HANG-
1
UP and press <OK
.
Scroll : to ON or OFF and press
2
<OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Personal settings
23
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2
Set date/time format
7
Clock and Alarm
You can set your preferred date/time
format for your phone. The default
This feature allows you to set the date,
time and alarm settings for your phone.
The default date and time is 01/01 and 00-00
respectively.
format is DD/MM and 24 HOURS
.
7.2.1 Set time format
Press m in idle mode, scroll :
to CLOCK&ALARM and press
<OK, scroll :to SET FORMAT
and press <OK.
1
7.1
Set date and time
Press m in idle mode, scroll :
to CLOCK&ALARM and press
<OK, press <OK to enter
1
Press <OK to enter TIME
2
3
FORMAT
.
DATE/TIME
.
•
The current setting is displayed.
The last stored date is displayed.
Enter the current date (DD/MM)
and press <OK.
2
3
Scroll : to select time format
display (12 HOURS or 24 HOURS
and press <OK to confirm.
)
The last stored time is displayed.
Enter the current time (HH-MM).
Scroll :to select AM or PM if the
time is in 12 HOURS format.Press
<OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
7.2.2 Set date format
Press m in idle mode, scroll :
1
•
A validation tone is emitted.
to CLOCK&ALARM and press
<OK, scroll :to SET FORMAT
and press <OK.
Note
An error tone will be emitted if an invalid
digit is entered in the date/time fields.
Hour: 00 to 12; Minute: 00 to 59
Date: 01 to 31; Month: 01 to 12
Scroll :to enter DATE FORMAT
2
and press <OK.
•
The current setting is displayed.
!
Scroll : to select date format
display (DD/MM or MM/DD) and
press <OK to confirm.
3
Warning
If your phone is connected to an ISDN
line through an adaptor, the date & time
may be updated after each call. The
availability of date & time update is
dependent on your network provider.
Please check the date & time settings in
your ISDN system or contact your
network provider.
•
A validation tone is emitted and the
screen returns to previous menu.
7.3
1
Set alarm
Press m in idle mode, scroll :
to CLOCK&ALARM and press
<OK, scroll : to ALARM and
press <OK.
24
Clock and Alarm
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll :to OFF, ON ONCE or ON
2
3
DAILY and press <OK
.
If you select ON ONCE or ON
DAILY, enter the time (HH-MM) for
the alarm and scroll : to select
AM or PM if the time is in 12
HOURS format. Press <OK to
confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Note
The alarm tone and alarm icon
will
only sound/blink for 1 minute when the
alarm time is reached. To mute the alarm
tone, simply press any key on the handset.
7.4
Set alarm tone
Press m in idle mode, scroll :
to CLOCK&ALARM and press
<OK, scroll :to ALARM TONE
and press <OK.
1
Scroll : to MELODY 1
,
MELODY
2
2
or MELODY 3 and press <OK to
confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Clock and Alarm
25
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2
Registration
8
Advanced settings
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
8.1
Change Master PIN
The Master PIN is used for registration/
unregistration of handsets. The default
Master PIN number is 0000. The
maximum length of the Master PIN is 8
digits. This PIN is also used to protect the
settings of your handset. Your handset
will prompt you whenever the PIN is
required.
To register your handset manually:
The Master PIN is required before you
can register or unregister handsets.
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
Note
By default, the Master PIN is 0000.
On the base station, press and hold
V for approximately 5 seconds.
On the handset, press m key,
scroll : to ADVANCED SET and
press <OK, scroll : to
1
2
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
<OK, scroll : to CHANGE PIN
and press <OK.
REGISTER and press <OK
.
Note
Enter the current Master PIN when
prompted and press <OK to
confirm.
2
3
If no action is taken on the handset within
10 seconds, the registration procedurewill
be aborted. If this happens, repeat Step 1.
•
The PIN entered will be shown as
asterisks (*) on the screen.
Enter the Master PINwhenprompted
3
and press <OK to confirm.
Note
Enter the new PIN and press <OK
to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
By default, the Master PIN is 0000.
WAITING_ _ is displayed on the
4
screen.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
See “Reset unit” on chapter 8.5 for more
details.
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
If no base is found within a certain period,
26
Advanced settings
Download from Www.Somanuals.com. All Manuals Search And Download.
an error beep is emitted to indicate failed
registration and the handset returns to idle
mode.
<OK, scroll : to COUNTRY
and press <OK.
Enter the Master PINwhenprompted
and press <OK to confirm.
2
8.3
Unregister
Note
Press m key in idle mode, scroll
: to ADVANCED SET and press
<OK, scroll : to UNREGISTER
and press <OK.
1
By default, the Master PIN is 0000.
Scroll : to the country of your
3
choice and press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Enter the Master PIN when
prompted and press <OK to
confirm.
2
3
8.5
Reset unit
Scroll :to select the handset
number to unregister and press
<OK.
You can reset your phone to its default
settings with this feature.
!
Warning
•
A validation tone is emitted to indicate
successful unregistration and the
screen returns to previous menu.
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
Note
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
belong to your new phone range, you can
only use your new phone to unregister it.
Note
You may have to configure your phone
once again. In this case the WELCOME
mode will appear again after master reset.
(see chapter 3.4)
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
<OK, scroll : to RESET and
press <OK.
8.4
Country selection
The availability of this menu is dependent
on your country. You can select another
country different from the one chosen
during WELCOME mode.
CONFIRM? is displayed on the screen.
2
3
Press <OK again to confirm.
•
•
A validation tone is emitted.
The unit is reset to its default
settings. (see “Default settings” on
chapter 8.10)
Note
Once the country is selected, the default
line settings for the selected country will
be applied to the phone automatically (e.g.
Recall time, Dial mode, Language, etc).
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
Advanced settings
27
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6
Set prefix
8.7
Change recall time
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
“Predialling” on chapter 4.1.1). You may
also use this feature to add a detect string
to match and replace the first few digits of
the number during predialling.
You can enter up to a maximum of 5
digits for the detect string and auto prefix
number respectively.
Recall time (or dial delay) is the time delay
by which the line will be disconnected
after you press r key. It can be set to
short, medium or long.
The default value of recall time that is preset
in your handset should be the best suited
for your country network and therefore
you should not need to change it.
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
<OK, scroll :to RECALL TIME
and press <OK.
Press m key in idle mode, scroll
1
: to ADVANCED SET and press
<OK, scroll : to AUTO PREFIX
and press <OK.
Scroll : to SHORT MEDIUM or
LONG and press <O,K to confirm.
2
•
A validation tone is emitted and the
screen returns to previous menu.
DETECT DIGIT is displayed on the
2
screen. Press <OK to enter.
•
The last stored detect string is
displayed (if any).
8.8
Change the dial mode
The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change it.
Enter a detect string number
(maximum 5 digits) and press <OK
to confirm.
3
4
PREFIX is displayed on the screen.
Press <OK to enter.
There are two dial modes: Tone or Pulse
.
Press m key in idle mode, scroll
1
•
The last stored prefix number is
displayed (if any).
: to ADVANCED SET and press
<OK, scroll : to DIAL MODE
and press <OK.
Enter the prefix number (maximum
5
10 digits) and press <OK to confirm.
Scroll : to TONE or PULSE and
2
•
A validation tone is emitted and the
screen returns to previous menu.
press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically added
to the predial number after r key is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after r key is pressed.
8.9
Set first ring
When this function is set to Off, the first
ring from a voice call will not sound. This is
particularly useful in countries where calling
line identity is sent after the first ring.
Press m in idle mode, scroll :
1
to ADVANCED SET and press
28
Advanced settings
Download from Www.Somanuals.com. All Manuals Search And Download.
<OK, scroll to FIRST RING and
press <OK.
Scroll : to ON or OFF and press
<OK to confirm.
2
•
A validation tone is emitted and the
screen returns to previous menu.
8.10 Default settings
Ringer Volume
Tones Melody
LEVEL 2
MELODY 1
Earpiece Volume LEVEL 2
Key Tone
ON
Language
Auto Hang Up
Country dependent
ON
Handset Name PHILIPS
Time/Date
Time format
Date format
Dialing Mode
Recall Time
First Ring
01/01; 00-00
24 HOURS
DD/MM
Country dependent
Country dependent
Country dependent
0000
Master PIN
Alarm
OFF
Alarm Tone
Auto Prefix
MELODY 1
EMPTY
Advanced settings
29
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Technical data
Display
Temperature range
Operation: Between 0 and 35º C (32
to 95º F).
•
•
Progressive LCD backlight
•
The backlight remains on for 15
seconds after each activation such as
an incoming call, key presses, lifting the
handset off the base station, etc.
The colour of the LCD backlight is
Amber.
•
Storage: Between -20 and 45º C (-4 to
113º F).
•
Relative humidity
•
•
Operation: Up to 95% at 40°C
Storage: Up to 95% at 40°C
General telephone features
•
Dual mode caller name & number
identification
•
10 standard tones melodies
Phonebook list, Redial list
and Call log
•
•
•
Phonebook list with 50 entries
Redial list with 5 entries
Call log with 10 entries
Battery
•
2 x HR AAA NiMh 550 mAh batteries
Radio specifications
•
•
Frequency band: 1880 - 1900 MHz
Maximum output power: 250 mW
Power consumption
•
Power consumption at idle mode:
around 800 mW
30
Technical data
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Sound
Connection
Handset does not ring!
The handset does not switch on!
Check that the RING VOLUME is not set
to RINGER OFF, and make sure icon is
not displayed on the screen (see “Set the
ring volume” on chapter 6.2.1).
•
Charge the batteries: Put the handset on
the base station to charge. After a few
moments, the phone will switch on.
The handset does not charge!
Caller does not hear me!
Microphone may be muted: During a call,
press M.
•
Check charger connections.
icon is not blinking during
charge!
•
•
•
Battery is full: There is no need to
charge the battery.
Bad battery contact: Adjust the
handset slightly.
Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
There’s no dialling tone!
•
•
No power: Check the connections.
Batteries are empty: Charge the
batteries.
•
•
Move closer to the base station.
Wrong line cable used: Use the line
cable provided.
•
Line adaptor is required: Connect the
line adaptor to the line cord.
Communication is lost during a call!
•
•
Charge the battery
Move closer to the base station.
Caller does not hear me clearly!
•
•
Move closer to the base station.
Move the base station at least one
metre away from any electronic
appliances.
The phone is "Out of range"!
Move closer to the base station.
•
Set-up
Frequent noise interference on my
radio or television!
SEARCHING... is displayed on handset
and
icon is blinking!
•
Move the base station as far away as
possible from the electrical appliances.
•
•
•
Move closer to the base station.
Make sure that your base station is on.
Reset your unit and restart handset
registration.
Frequently asked questions
31
Download from Www.Somanuals.com. All Manuals Search And Download.
I cannot change the settings of my
voice mail
Phonebook entry cannot be stored
and MEMORY FULL is displayed!
•
Delete an entry to free memory
•
Operator voice mail is managed by
your operator and not the phone itself.
Please contact your operator should
you want to change the settings.
before saving your contact again.
The Master PIN code is wrong!
•
The default master PIN is 0000.
Product behaviour
•
Reset the handset to revert to the default
master PIN code if it has been changed
before (see “Reset unit” on chapter 8.5).
Keypad does not work!
•
Unlock your keypad: Long press *in
idle mode.
The handset warms up when
making a long call!
•
This is a normal behavior. The handset
consumes energy while calling.
The handset cannot be registered to
the base station!
•
Maximum number of handsets (4) has
been reached. To register a new
handset, unregister an existing handset.
Remove and replace the handset
batteries.
Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see “Registration”
on page 26).
•
•
Caller number is not displayed!
•
Service is not activated: Check your
subscription with your network
operator.
My handset keeps going into idle
mode!
•
If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
idle mode automatically when you place
the handset back on the base station.
32
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Index
A
K
Accessories 6
Key tone 22
Alarm 24
Alarm tone 25
Keypad lock/unlock 15
Answer a call 14
Answer an external call 20
Auto hang-up 23
L
Language 23
LCD Backlight 30
C
M
Call in progress 15
Call log 14, 18
Make a call 14
Master PIN 26
Menu structure 13
Mute 15
Charge battery 11
Clock and alarm 24
Conference call 20
Connect base station 10
O
Overview of the base station 9
Overview of your phone 7
D
Date and time 24
Default settings 29
Delete a call list entry 19
Delete a redial number 18
Delete call list 19
Delete phonebook 16
Delete redial list 18
Dial mode 28
P
Paging 21
Phonebook 14, 16
Predialling 14
Prefix 28
R
Direct dialling 14
Display icons 9
Recall time 28
Recycling and disposal 4
Redial list 14, 17
Register 26
E
End a call 14
Reset unit 27
Ring volume 22
H
Handset name 22
Handset tone 22
S
Save a redial number 18
Store a contact 16
I
Switch handset on/off 15
Install battery 11
Install phone 10, 11
Intercom 19
T
Text or number entry 15
Tone melody 22
Transfer an external call 20
Index
33
Download from Www.Somanuals.com. All Manuals Search And Download.
U
Unmute 15
Unregister 27
V
Volume 15
34
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
Printed in China
Document number: 3111 285 41592 (GB)
Download from Www.Somanuals.com. All Manuals Search And Download.
|