Business Mobility
DECT Cordless Handset
C124
Download from Www.Somanuals.com. All Manuals Search And Download.
Business Mobility
DECT Cordless Handset
C124
Issue:
0610
Download from Www.Somanuals.com. All Manuals Search And Download.
A Publication of
NEC PHILIPS Unified Solutions Nederland B.V.
HILVERSUM, THE NETHERLANDS
Order No.:
Manual No.:
Date:
9600 015 39001
October 2006
Great care has been taken to ensure that the information
contained in this handbook is accurate and complete.
Should any errors or omissions be discovered or should any
user wish to make a suggestion for improving this handbook,
they are invited to send the relevant details to :
NEC PHILIPS Unified Solutions Nederland B.V.
P.O. BOX 32
1200 JD HILVERSUM
THE NETHERLANDS
2006
© NEC PHILIPS Unified Solutions Nederland B.V.
All right are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.
All brand names and product names in this document are
trademarks or registered trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice to the user
The DECT handset described in this manual should only be used in combination with DECT systems
delivered by NEC Philips. In order to take advantage of all features described in this manual the
country and network provider specific features should match the features of the NEC Philips system.
Important safety information
This product requires a 230 V alternating current power supply.
Only use adaptor and battery pack that is supplied with the package.
Use only supplied charging cradle for recharging the handset batteries.
Do not disassemble this product, it contains no user-serviceable parts.
In case of a thunderstorm, it is advised to disconnect the power adaptor.
Do not expose this product to dust, strong sunlight, humidity, high temperature or mechanical shock.
Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping it with a
soft, dry cloth.
Sensitive Electronic Environment
Any radio-based equipment can potentially cause interference with other equipment and can be
interfered from other equipment. This also applies for DECT equipment. However due to the very low
transmission power level the chances for interference are very small. Research proves that
operational DECT phones normally don't influence electronic equipment however some precautions
must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment.
When DECT phones operate in straight nearness of sensitive electronic equipment incidental
influence can appear. You are advised not to place the DECT phone on or close (less than 10cm) to
this kind of equipment, even in standby mode. Please also use the other documentation supplied with
the various parts of your telephone system.
Electric, Magnetic and Electromagnetic Fields (“EMF”)
Our products, like any electronic apparatus, have the ability to emit and receive electro magnetic
signals. One of our leading business principles is to take all necessary health and safety measures for
our products, to comply with all applicable legal requirements and to stay well within the EMF
standards applicable at the time of producing the products.
NEC Philips is committed to develop, produce and market products that cause no adverse health
effects. NEC Philips confirms that if its products are handled properly for their intended use, they are
safe to use according to scientific evidence available today.
NEC Philips plays an active role in the development of international EMF and safety standards,
enabling NEC Philips to anticipate further developments in standardization for early integration in its
products.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents and Accessories
The following items are included in the package:
-
-
-
-
Handset unit.
Charger unit.
Rechargeable AAA size NiMH batteries (1.2V 600mAh, 3 pieces).
Power supply unit.
Handset
Charger Unit
1. LCD screen
2. Keypad
3. Ear piece
8. Charger charge contacts
9. Power indication
10. AC adapter
4. Microphone
5. Battery compartment cover
6. Handset charge contacts
7. Headset jack
AC adaptor.
Type of adaptor
depends on
country.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Start-Up
Check if the mains voltage matches the adapter mains voltage.
Plug the AC adapter into the mains socket-outlet.
On the handset, gently slide & open the battery cover and insert the rechargeable
batteries supplied with the package. The + - poles of the batteries must correspond to
the + - markings in the battery compartment.
Replace the battery cover by sliding it back into place.
Put the handset onto the charger unit. Make sure charge indicator on the handset unit
animates to show charging in progress.
IMPORTANT NOTICE :
To obtain best battery performance, charge the handset for 12 hours before initial use.
Defect handsets or defect or exhausted batteries should never be disposed of as
municipal waste. For more information refer to the chapter “Environmental protection”.
Subscribe the handset to the DECT system using the Registration Menu in the Main
Menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Arrangement
Extra display line for dialed digits,
calling number, etc.
Symbol
Indication
Received signal strength. If the handset is out of range the
display shows: SEARCHING...
Keypad lock is activated
On: handset is off hook.
Flashing: incoming call.
The handset speakerphone mode is activated.
The handset microphone is muted.
Battery capacity.
During charging, it is an animated icon.
A voice message is waiting.
The handset is in standby mode. The handset name will be
displayed if it is programmed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Keypad Arrangement
Button
In Standby
In Conversation
In Menu Mode
Make or answer a call.
When switched off:
switch on the handset.
Start dialing from phone
book, redial list, or caller
ID list.
Enquiry / Call transfer.
Long press this button to
switch off the handset.
End a call.
Return to standby mode.
To enter digit 0-9
Enter digit 0-9.
Enter call log.
Send DTMF signal 0-9.
Increase receiver
volume.
Scroll through menu
items.
Decrease receiver
volume.
Scroll through menu
items.
Enter telephone book
Confirm an action or
selection.
Enter menu mode.
Enter redial list.
Not used.
Not used
Toggle speakerphone
mode.
Toggle upper/lower case
in phone book mode.
Go back to previous
Toggle microphone mute. menu or cancel an
action.
Press and hold to insert
pause in phonebook
entries.
Press and hold to insert
pause.
Enter DTMF #.
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal Operation
Making a Call
Making a call can be done as follows:
-
-
-
-
-
Press
and dial a number
Pre-dial a number and press
Select a number from the phonebook and press
Select a number from the redial list and press
Select a number from the caller list and press
Receiving a Call
An internal call is indicated by the INT icon on the display and the internal ring
tone.
An external call is indicated by the external ring tone.
The caller's number is displayed if it is made available by the PBX. If the
caller's number is present in the phonebook the caller's name is displayed.
Answer an incoming call by pressing
operation.
or by pressing
for handsfree
An incoming call can be rejected by pressing
After answering a call the call duration time is displayed.
Enquiry Call / Call Transfer
During a telephone conversation press
to hold the call and dial another
number. Press
transfer the call.
again to switch back to the first caller. Press to
Ending a call
End a call by pressing
Keypad Lock
In idle mode the keypad can be locked by pressing
Repeat this key combination to unlock the keypad.
followed by
When the keypad is locked incoming calls can be answered.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Functions
All essential functions of this handset can be programmed via the Menu
button, the Up/Down arrow buttons and the backspace button.
/ OK
The following menu items are available:
Caller List
The number of an incoming call is displayed by the handset when available. If
the number is present in the phone book, the related name will be displayed.
The last 10 callers are stored. The oldest record is replaced by newest
record. Unread records are marked with a "*” character.
To enter the caller list press
select CALLER LIST. Press
functions are available:
or enter the menu by pressing
and
to scroll through the list. The following
Call Back
Select a number from the list and press
Copy to Phonebook
Select a number from the list and press OK.
Select COPY TO PHB, and press OK.
You are prompted to edit the number and add a name.
Delete Entries
In the caller list select an entry and press OK.
Select DELETE to delete a single entry or DELETE ALL to delete all entries.
Press OK to confirm.
Phonebook
There are 40 phone book entries (12 characters and 24 digits).
To enter the phonebook press or enter the menu by pressing
and
select PHONEBOOK. The following functions are available:
Create Entry
In the phonebook scroll to NEW ENTRY and press OK.
The display shows EDIT NUMBER. Use the alphanumeric buttons (0 to 9) to
enter a number and press OK to confirm.
The display shows EDIT NAME.
Use the alphanumeric buttons (1-9) to enter a name and press OK to confirm.
Use button (0) to enter a space. Press
lower case.
to switch between upper and
Delete Entries
In the phonebook select an entry and press OK.
Select DELETE to delete a single entry or DELETE ALL to delete all entries.
Press OK to confirm.
Modify Entry
In the phonebook select an entry and press OK.
Select EDIT and press OK.
You are prompted to modify the number and the name. Confirm with OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Redial List
To enter the redial list press
press OK.
or from the main menu select REDIAL and
The following functions are available:
Copy to Phonebook
In the redial list select an entry and press OK.
Select COPY TO PHB and press OK.
You are prompted to modify the number and the name. Confirm with OK.
Delete Entries
In the redial list select an entry and press OK.
Select DELETE to delete a single entry or DELETE ALL to delete all entries.
Press OK to confirm.
Tone Setup
In the main menu select TONE SETUP and press OK.
In the Tone Setup menu the following settings can be changed:
Silent Charging mode
In silent charging mode the handset will not ring when placed on the charger.
Toggling this mode is done as follows:
In the TONE SETUP menu select SILENT CHG. and press OK.
Select ON or OFF and press OK.
External Melody
Used to change the ring melody for external calls.
In the TONE SETUP menu select EXT. MELODY and press OK.
Scroll through the list and select the required melody by pressing OK.
Internal Melody
Used to change the ring melody for internal calls.
In the TONE SETUP menu select INT. MELODY and press OK.
Scroll through the list and select the required melody by pressing OK.
Ring Volume
Used to change the ring volume for all calls.
In the TONE SETUP menu select RING VOLUME and press
Use
to modify the ring volume and confirm by pressing OK.
Key Tone
Toggling key tones is done as follows:
In the TONE SETUP menu select KEY TONE and press OK.
Select ON or OFF and press OK.
Range Warning
The handset can give a warning beep when the radio contact is nearly lost.
Toggling the range warning beep is done as follows:
In the TONE SETUP menu select RANGE WARN and press OK.
Select ON or OFF and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset Name
The handset name is displayed in idle mode.
Changing the handset name is done as follows:
In the main menu select HS NAME and press OK.
You are prompted to edit the handset name. Confirm with OK.
Registration Menu
This handset can be registered to only a single DECT system. The following
functions are available.
Subscribe
Subscribe the handset to the DECT system.
First prepare the subscription in the DECT system.
In the registration menu select SUBSCRIBE and press OK.
You are prompted to enter the pin code, confirm with OK.
Cancel HS
The normal way to remove a subscription is via the DECT system. This will
also remove the subscription from the handset. If this is not possible the
subscription can be removed from the handset as follows:
In the registration menu select CANCEL HS and press OK.
You are prompted to confirm this action.
Answer Mode
The handset can be programmed to answer a call with key
(normal mode) or with any key.
or
In the ANSWER MODE menu select NORMAL or ANY KEY and confirm with
OK.
Language
In the language menu scroll to the required language and confirm with OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental protection
Product disposal information
For countries in the European Union
The symbol depicted here has been affixed to your product in order to inform you
that electrical and electronic products should never be disposed of as municipal
waste.
Electrical and electronic products including the cables, plugs and accessories
should be disposed of separately in order to allow proper treatment, recovery and
recycling. These products should be taken to a designated facility where the best
available treatment, recovery and recycling techniques are available. Separate
disposal has significant advantages: valuable materials can be re-used and it
prevents the dispersion of unwanted substances into the municipal waste stream.
This contributes to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and
electronic products via the general municipal waste stream.
In order to facilitate separate disposal and environmentally sound recycling NEC Philips Unified
Solutions has made arrangements for local collection and recycling in all member states of the
European Union. In case your electrical and electronic products need to be disposed of please refer to
the contractual agreements that your company has made upon acquisition of these products. Should
this information not be available, please contact the local NEC Philips organization or contact us at :
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done
in line with the local regulations. If no arrangement has been made with NEC Philips Unified Solutions
or your supplier, please contact the local authorities for further information.
Battery disposal information
Defect or exhausted batteries should never be disposed of as municipal waste. Return old batteries to
the battery supplier, a licensed battery dealer or a designated collection facility. Do not incinerate
batteries.
This product uses rechargeable NiMH batteries. Do not use any other type. For battery replacement
or removal please remove the battery cover as described in chapter “Installation and start-up”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of conformity (European Union)
Česky
Ελληνική
“NEC Philips Unified Solutions” tímto prohlašuje, že tento
C124 je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ
Η
NEC Philips ΕΝΟΠΟΙΗΜΕΝΕS
ΛΥSΕΙS ∆ΗΛΩΝΕΙ ΟΤΙ C124 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Dansk
Undertegnede “NEC Philips Unified Solutions” erklærer
herved, at følgende udstyr C124 overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
Français
Par la présente “NEC Philips Unified Solutions” déclare que
l'appareil C124 est conforme aux exigences essentielles et
aux autres dispositions pertinentes de la directive 1999/5/CE.
Deutsch
Hiermit erklärt “NEC Philips Unified Solutions”, dass sich das
Gerät C124 in Übereinstimmung mit den grundlegenden
Íslenska
Hér með lýsir “NEC Philips Unified Solutions” yfir því að C124
er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru
í tilskipun 1999/5/EC.
Anforderungen
und
den
übrigen
einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
Italiano
Käesolevaga kinnitab “NEC Philips Unified Solutions” seadme
Con la presente “NEC Philips Unified Solutions” dichiara che
questo C124 è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
C124
vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
Latviski
English
Ar šo “NEC Philips Unified Solutions” deklarē, ka C124 atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
Hereby, “NEC Philips Unified Solutions”, declares that this
C124 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Lietuvių
Šiuo “NEC Philips Unified Solutions” deklaruoja, kad šis C124
atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Español
Por medio de la presente “NEC Philips Unified Solutions”
declara que el C124 cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Slovensky
Malti
“NEC Philips Unified Solutions” týmto vyhlasuje, že C124
spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Hawnhekk, “NEC Philips Unified Solutions”, jiddikjara li dan
C124 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti
oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Suomi
Magyar
“NEC Philips Unified Solutions” vakuuttaa täten että C124
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Alulírott, “NEC Philips Unified Solutions” nyilatkozom, hogy a
C124 megfelel a vonatkozó alapvetõ követelményeknek és
az 1999/5/EC irányelv egyéb elõírásainak.
Nederlands
Svenska
Hierbij verklaart “NEC Philips Unified Solutions” dat het
toestel C124 in overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 1999/5/EG.
Härmed intygar “NEC Philips Unified Solutions” att denna
C124
egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
står
I
överensstämmelse med de väsentliga
Norsk
“NEC Philips Unified Solutions” erklærer herved at utstyret
C124 er i samsvar med de grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/EF.
Polski
Niniejszym, "NEC Philips Unified Solutions" deklaruje, ze
C124 jest zgodny
z
wymaganiami
i
innymi warunkami
Dyrektywy 1999/5/EC.
Português
“NEC Philips Unified Solutions” declara que este C124 está
conforme com os requisitos essenciais e outras disposições
da Directiva 1999/5/CE.
Slovensko
NEC PHILIPS Unified Solutions
Anton Philipsweg 1
1223 KZ Hilversum
“NEC Philips Unified Solutions” izjavlja, da je ta C124
skladu z bistvenimi zahtevami in ostalimi relevantnimi določili
direktive 1999/5/ES.
v
The Netherlands
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Rules (United States)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect equipment into an outlet on a circuit different from that to which receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment:
SAR 0.0560 W/kg (Normal use), SAR 0.017 W/kg (Pocket/Belt use).
Privacy of communications may not be ensured when using this phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|