Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6
ADVANCED FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.1
TV Channel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.1.1 Storing TV Channels Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.1.2 Storing TV Channels Manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.1.3 Fine Tuning TV Channel Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.1.4 Labeling the TV Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.1.5 Choosing a MTS (Multi-Channel Television Sound) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1.6 Editing TV Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2
6.3
Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
6.2.1 Adjusting Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2.2 Reset to the Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.3.1 Adjusting Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3.2 Reset to the Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.4
6.5
6.6
6.7
6.8
6.9
OSD Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Minimize Screen Sticking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Freezing the Current Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
On-Screen Display Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Adjusting the Menu Transparency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
6.10 Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
6.11 Setting up the PC Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
6.12 Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6.13 Viewing the Picture In Picture (PIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
6.14 Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7
8
9
INPUT MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CLEANING AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.1
9.2
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
10
LIMITED WARRANTY(EUR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
1.
IMPORTANT NOTES AND SAFETY INSTRUCTIONS
1.1
SAFETY INSTRUCTIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Read and keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Disconnect from the electric outlet before cleaning. Do not use
liquid or aerosol cleaners. Clean only with a slightly damp cloth.
ꢀ
ꢀ
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install in direct sunlight, near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
ꢀ
Do not defeat the safety purpose of the polarized or grounding
type plug.A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third grounding
prong.The wide blade or third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
ꢀ
ꢀ
ꢀ
Do not remove cover, to prevent electric shock. Refer servicing to
qualified service personnel only.
Unauthorized modification of this equipment or usage of an unshielded
connecting cable may cause excessive interference.
Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls can result in
damage which often requires extensive work by a qualified technician
to restore the unit to normal operation.
ꢀ
ꢀ
Use in well-ventilated area and do not block any of the ventilation
openings. Install in accordance with the manufacturer’s instructions.
The unit must be operated from the type of power source
indicated on the label. If the type of available power is unknown,
consult your dealer or local power company.
ꢀ
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus power outlet.This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician. Do not alter the plug; this will defeat the safety feature.
ꢀ
ꢀ
Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.
If the picture displayed looks abnormal, turn off the unit and
disconnect it from the electric outlet.Verify your signal wire
connections and reconnect the display to the electric outlet.
ꢀ
Only use attachments/accessories specified by the manufacturer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
ꢀ
Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with apparatus.When a cart is used, use
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
ꢀ
ꢀ
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-sup-
ply cord or plug is damaged, liquid has been spilled or objects have fall-
en into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
ꢀ
ꢀ
This product may contain mercury. Disposal of this material may be
regulated due to environmental considerations.
For disposal or recycling information, please contact your local
Damage Requiring Service:
The appliance should be serviced by qualified service personnel
when:
•
•
•
•
The power supply cord or the plug has been damaged or frayed.
Objects have fallen, or liquid has been spilled into the appliance.
The appliance has been exposed to rain.
The appliance does not appear to operate normally or exhibits a
marked change in performance.
•
•
The appliance has been dropped, or the enclosure damaged.
Unit does not operate normally when the operating instructions
are followed.
ꢀ
Tilt/Stability:
•
All displays must comply with recommended international global
safety standards for tilt and stability properties of its cabinet design.
•
Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
•
•
Do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the set and cause product damage
and/or personal injury.
Do not place the unit on an unstable cart, stand or table. Or the
product may fall, causing serious damage.
ꢀ
ꢀ
Do not place the unit on a bed, sofa, rug, or similar surfaces.
Wall or Ceiling Mounting:
The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
ꢀ
ꢀ
Power Lines:
An outdoor antenna should be located away from power lines.
Object and Liquid Entry:
Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
ꢀ
Battery Usage:
CAUTION:To prevent battery leakage that may result in bodily
injury, property damage, or damage to the unit.
•
Install all batteries correctly, with + and - aligned as marked on
the unit.
•
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
Remove batteries when the unit is not used for a long time.
1.2
WARNINGS AND PRECAUTIONS
1.2.1
NOTETOTHE CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground must be
connected to the grounding system of the building, as close to the
point of cable entry as practical.
KNOWTHESE SAFETY SYMBOLS
ꢀ
ꢀ
This lightning flash with arrow-head within a triangle indicates
uninsulated material within your unit, which can cause an electric
shock. For the safety of everyone in your household, do not
remove product cover.
For the safety of everyone in your household, do not remove
product cover.The exclamation point within a triangle calls
attention to features for which you must read the enclosed
literature closely to prevent operating and maintenance problems.
WARNING
To reduce the risk of fire or electric shock, this appliance must not be
exposed to rain or moisture, and objects filled with liquids, such as
vases, must not be placed upon this apparatus.
CAUTION
To prevent electric shock, match wide plug blade to wide slot, and fully
insert.
ATTENTION
Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la bome correspondante de la prise et pousser jusqu’au
fond.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
1.3
CLEANING & CARE
ꢀ
To avoid possible shock hazard, please be sure that the television is
unplugged from the electrical outlet before cleaning.
ꢀ
When cleaning the television screen, take care not to scratch or
damage the screen surface (avoid wearing jewelry or using anything
abrasive).
ꢀ
ꢀ
Wipe the front of the screen with a clean cloth dampened with
water. Use even, easy, vertical strokes when cleaning.
Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool clear water. Use a clean dry cloth
to dry the wiped surfaces.
ꢀ
ꢀ
Occasionally vacuum the ventilation holes or slots in the cabinet
back.
Never use thinners, insecticide sprays, or other chemicals on or
near the cabinet, as they might cause permanent marring of the
cabinet finish.
ꢀ
Do not allow a still image to be displayed for an extended period
of time as this can cause a permanent after-image to remain.
1.4
END-OF-LIFE DISPOSAL
ꢀ
This Philips product and its packaging contain materials that can be
recycled and re-used. Specialized companies can recycle your
product to increase the amount of reusable materials and minimize
the amounts which need to be properly disposed.
ꢀ
ꢀ
This product might also use batteries, which should not be thrown
away when depleted, but should be handed in and disposed of as
small chemical waste.
Please find out about the local regulations regarding the disposal of
the television, batteries, and packaging materials whenever you
replace existing equipment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
2. UNPACKING AND INSTALLATION
2.1
UNPACKING
ꢀ
This product is packed in a carton, together with the standard
accessories.Any other optional accessories will be packed
separately.
ꢀ
ꢀ
The weight of the product differs - depending on the type - from
29 to 43 kg. Due to the size and weight it is recommended to
move it by 2 people.
The protective glass and the glass substrate are installed on the
front of the product. Since both glass can be broken and scraped
easily the product has to be handled with care. Never place the
product with the glass faced down unless it is protected with pads.
ꢀ
After opening the carton ensure that the content is in good
condition and complete.
2.2
PACKAGE CONTENTS
Please verify that you received the following items with your package
content:
1
2
3
4
5
6
7
PDP
Remote Control with batteries
User Manual on CD-ROM
Power Cord (UK, Continent)
VGA, DVI cable
Antenna Cable
Table stand (feet)
PDP
Antenna Cable
VGA, DVI cable
User’s Manual
Power Cord
Remote Control/
AAA Batteries
8
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
2.3
INSTALLATION NOTES
ꢀ
Due to the high power consumption, always use the plug
exclusively designed for this product. If an extended line is
required, please consult your service agent.
ꢀ
ꢀ
The product should be installed on a flat surface to avoid tipping.
The distance between the back of the product and the wall should
be maintained for proper ventilation.Avoid installing the product in
the kitchen, bathroom or any other places with high humidity so as
not to shorten the service life of the electronic components.
Please ensure the product is installed horizontally.Any 90 degrees
clockwise or counter-clockwise installation may induce poor
ventilation and subsequent component damage.
ꢀ
ꢀ
To protect the screen and avoid screen damage, do not display a
still picture for a long time.
The PDP can normally operate only under 2000m in height. It
might abnormally function at a place over 2000m in height and do
not install and operate there.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
3.
PARTS AND FUNCTIONS
3.1
1
FRONTVIEW
Input Button
Use this button to switch between available inputs.
2
3
Menu Button
Use this button to engage the On Screen Display menu.
Volume Adjustment Buttons
Use these buttons to adjust volume up and down.These buttons
also serve as navigation and adjustment buttons when On Screen
Display menu is engaged.
4
Select Buttons
Use these buttons to navigate through the On Screen Display
menu. If an optional TV tuner is installed, these buttons also
function as Channel Up/Down.
5
6
Power (Standby) Button
Turns power on/off from standby mode.There is a wait period
between on/off cycles.
Status LED
•
•
•
Not Illuminated = No AC Power detected
If the main power switch (rear of panel) is turned off, this LED
will not illuminate.
Red = Standby (Power OFF) with AC power detected
The LED will illuminate in red color if the PDP is shut off but the
main power cord is plugged into the back of the unit.
Solid Green = Power ON
7
Remote Control Signal Receiver
Point the remote control towards this spot on the PDP.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
3.2
1
REARVIEW
External speaker output
Connect to external speakers.
2
3
4
5
RS-232 Connector
Connect to a PC to update software.
Digital DVI input
Connect to digital video signals from a Set-Top box or Computer.
RGB(VGA) input
Connect to RGB (VGA) output of Computer or Set-Top box.
ComponentVideo inputs
Auto-detecting component video inputs (Y/Pb/Pr orY/Cb/Cr) for
connecting to the component output jacks of a DVD player or
Set-Top Box.
6
7
S-Video input
Connect S-Video signals from external sources such asVCRs or
DVD players.
Monitor output
Connect to the video and audio input of a recordingVCR or DVD
Connect to the audio input of an audio system.
8. Video input
Connect to the video and audio output of an external device.
9
SCART (AV) Connector
Connect to external sources such asVCRs or DVD players.
10 Power connection
Connect the supplied power cord to the wall outlet.
11 ANT
Connect to an antenna or a cable TV system.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
3.3
REMOTE CONTROL
3.3.1
GENERAL FUNCTIONS
1
2
Sound Mute On/Off
Standby Power On/Off
Push this button to switch on the PDP from Standby mode.
Push it again to turn it off to Standby mode.
3
4
5
6
7
Menu
Activates the OSD (On Screen Display) menu
Volume +/-
Turns volume up or down.
Channel Up/Down
Changes the TV channels sequentially.
INPUT
Displays the available input sources.
AUTO
- Used to adjusts the screen automatically when connected to the
DigitalVisual Interface (DVI) or PC input.
- Used to launch the Program Table menu while watching analog TV
channels.
8
9
I.SIZE (Image SIZE)
Used to select the picture size.
MTS
Used to select the sound mode.
10 FREEZE
Freeze the display on the screen.The playback system will continue
playing.
11 Number keypad
Use number keypad to select the TV channel you want to watch.
12 RECALL
Display information.
13 SLEEP
Press this button to set timer off.
14 PIP Function Buttons
LOCATE : Used to select a location of the sub-picture. It is avail-
able in PIP mode only.
SIZE : Used to select a size of the sub-picture. It is available in PIP
mode only.
SWAP : Used to interchange the main picture and sub-picture.
It is available in PIP and PBP mode only.
A.SWAP : Used to select the audio for the main or sub-picture.
It is available in PIP and PBP mode only.
SPLIT : Used to select a PIP mode (NORMAL, PIP, PBP)
S.SELECT (Screen SELECT) : Used to select the main picture
or sub-picture.Then you can
adjust the status of selected
picture. It is available in PIP and
PBP mode only.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
TELETEXT FUNCTION BUTTONS
TEXT
3.3.2
1
2
3
Activates the TELETEXT mode.
INPUT
Displays the TELETEXT index.
Fastext
With Fastext, you can easily access the topic and relevant pages
you want by pressing the red, green, yellow and blue buttons on
the remote control.
In TELETEXT mode, volume controls remain available, but the
relevant symbols are not shown on the screen.
4
5
Page Down (AUTO)
Displays the previous TELETEXT page.
Zoom (I.SIZE)
Press the I.SIZE button once to zoom in on the top part of the
screen.
Press twice to zoom in on the bottom part of the screen and
three times to return to normal display.
6
7
Page Up (MTS)
Displays the next TELETEXT page.
FREEZE
Freezes the current page, preventing update and subpage display.
•
Press the HOLD/POSITION button on the remote control to
select this function.
•
Press the HOLD/POSITION button again to cancel.
8
9
Reveal
Reveals hidden page information. Press the Reveal button to show
the information again.
Sub-page
Press to display a secondary page by entering its number.
3.3.3
INSERTINGTHE BATTERIES INTHE REMOTE
CONTROL
1
2
Remove the cover on the rear of the remote control.
Insert two AAA size 1.5V batteries ensuring that the "+" and "-"
ends of the batteries are correctly aligned.
3
Replace the cover.
Note:
Do not mix battery types, e.g. alkaline and manganese.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
4.
CONNECTIONSTO EXTERNAL EQUIPMENT
4.1
CONNECTINGTO AN AERIAL
To view TV channels correctly, a signal must be received using an
antenna. Connect the aerial or network input cable to the ANT jack on
the rear of the PDP.
Note:
When installing or re-installing your PDP, be sure to use the supplied
coaxial antenna cable. If you connect using a different coaxial cable,
there is risk of noise or interference to the screen image.
(You must not use another general purpose cable.
Use the 3M/5M/7M cable supplied by your dealer.)
• An outdoor aerial
• A cable TV network
4.2
CONNECTING EXTERNAL EQUIPMENT (VCR,
DVD, CAMCORDER, SATELLITE RECEIVER)
4.2.1
USING SCART (AV) SOCKET INPUT
1
Connect the SCART socket of the external device to the SCART
socket of the PDP.
2
Connect the video recorder to the antenna wall socket or cable
box.
4.2.2
USING S-VIDEO INPUT
1
Connect the S-Video (4-pin DIN) connector of the external device
to the S-VIDEO INPUT of the PDP.
2
Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks located next to the S-VIDEO connector.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
USING COMPONENTVIDEO INPUT
4.2.3
1
2
3
4
Connect the green-colored (labeled as "Y") jack of the device to
the green-colored "Y" jack of the PDP.
Connect the red-colored (labeled as "Pr") jack of the device to the
red-colored "PR/CR" jack of the PDP.
Connect the blue-colored (labeled as "Pb") jack of the device to
the blue-colored "PB/CB" jack of the PDP.
Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks of the PDP.
4.2.4
USINGVIDEO INPUT
1
Connect the jack of the external device to theVIDEO INPUT of
the PDP.
2
Connect the red (R) and white (L) audio jacks to the R and L
audio-in jacks located next to theVIDEO connector.
4.2.5
USING MONITOR OUTPUT
1
Connect the jack of the DVD orVCR (for recording) or audio
system to the MONITOR OUTPUT of the PDP.
2
Connect the red (R) and white (L) audio jacks to the R and L
audio-in jacks located next to theVIDEO connector.
4.2.6
USING DVI INPUT
1
Connect the DVI-jack of the DVD, decoder or satellite receiver to
the DVI INPUT of the PDP.
2
Connect the red (R) and white (L) audio jacks to the R and L
audio jacks located next to the DVI connector.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
4.3
EXTERNAL AUDIO CONNECTION
CONNECTING EXTERNAL SPEAKER
4.3.1
Connect the speaker audio cable to the external speaker output jack
on the rear of the PDP matching the “+” and “-” ends of the cable with
the diagram on the PDP.
• Before connecting the speaker wire to the PDP, turn off your PDP.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
4.4
CONNECTING A PC
USING RGB (VGA) OR DVIVIDEO INPUT
4.4.1
1
1
Connect the 15-pin D-Sub RGB(VGA) connector of the PC to the
RGB-IN connector of the PDP.
If you have a PC that is equipped with a DVI (DigitalVisual
Interface), you may connect the PC DVI connector from the PC to
the DVI-IN connector of the PDP.
2
For both RGB (VGA) and DVI, connect the red (R) and white (L)
audio jacks of the PC to the R and L (DVI/RGB) AUDIO IN jacks
of the PDP.
Setting UpYour Display Using Plug and Play
This display adheres toVESA Plug and Play standard to eliminate
complicated and time consuming setup of monitors.This PDP
identifies itself to the computer and automatically sends the PC its
Extended Display Identification Data (EDID) using Display Data
Channel (DDC) protocols.
How to Set upYour PC for Use with PDP (Windows)
The display settings for a typical Windows-based computer are shown
below. However, the actual screens on your computer will differ
depending on the version of Windows and video card equipped with
the computer. Even though the actual screen may look different from
example displayed below, basic set-up routine will apply in most cases.
2
3
1
Go to the Window's CONTROL PANEL by clicking START,
SETTINGS, CONTROL PANEL.
=> The CONTROL PANEL Window is displayed.
2
3
4
Select the DISPLAY icon from this window.
=> The DISPLAY PROPERTIES dialog box is displayed.
Select the SETTINGS tab to display your computer's video output
settings.
4
5
Set the "Screen Resolution" settings to 1024x768 PIXELS. For
COLOR QUALITY, select 24 BIT COLOR (might also be
expressed as 16 million colors).
5
6
If a vertical-frequency option is available, set the value to 60 or
60 Hz.
Click OK to complete the setting.
Note:
Both screen position and size will vary, depending on the type of PC
graphics card and its resolution selected. See page 36 for an overview
of the supported resolutions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
5.
BASIC FUNCTIONS
5.1
POWERING ON / OFF
Make sure the PDP is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1
Press the MENU button on the front panel or remote control.
=> The PDP will now turn on after a brief pause.The STATUS LED
will now turn green to indicate power on status.
2
Turn off the power by pressing the POWER button on the front
panel or the remote control again.
5.2
SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1
Press the MENU button on the front panel or remote control.
2
Pressing the CH+ or CH- button will cycle the PDP through all
available input signal sources in the following order:
TV - SCART 1 - SCART 2 -VIDEO - S-VIDEO -
COMPONENT - RGB - DVI
Main Input
3
Press the VOL+ or VOL- button to select the source.
TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
Move [- CH +]
Select [-VOL +]
Exit [MENU]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
5.3
VOLUME ADJUSTMENT
Using Front Panel or Remote Control
1
2
3
4
Press the MENU button on the front panel or remote control.
Press the VOL+ or VOL- button to select Audio.
Image
Screen
Volume
Setup
Audio
60
Treble
Bass
Balance
Mute
055
072
043
Press the CH- button to enter the selected menu group.
Press the VOL+ or VOL- button to adjust the sound volume.
ON
[-VOL+] to Preset Audio
Exit [MENU]
OFF
Audio Preset
Note:
Move [- CH +] Adjust [-VOL +]
If the PDP's built-in speakers are turned off, then the volume
controls will not affect volume generated by the built-in speaker.
Image
Screen
Volume
Setup
Audio
60
Treble
Bass
Balance
Mute
055
072
043
ON
[-VOL+] to Preset Audio
Select [-VOL +] Exit [MENU]
OFF
Audio Preset
Move [- CH +]
5.4
MUTE
Using Remote Control
1
2
Press the MUTE button on the remote control.
=> The audio is cut off.
Press the MUTE, VOL+ or VOL- button to turn the audio
back on.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
5.5
DISPLAY INFORMATION
Via Remote Control
Press the RECALL button to display the channel information and set-
ting status. Press again to exit.
Note:
The displayed information can differ, depending on the selected source.
TIMER OFF
001-ABC
TV
20
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.
ADVANCED FUNCTIONS
6.1
6.1.1
TV CHANNEL CONTROLS
STORINGTV CHANNELS AUTOMATICALLY
You can scan for the frequency ranges available (availability depends on
your country). Automatically allocated program numbers may not
correspond to actual or desired program numbers. However you can
sort numbers manually and clear any channels you do not wish to
watch.
Image
Screen
Setup
Audio
TV
Channel Settings
Program Edit
1
2
Press the MENU button on the front panel or remote control.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the VOL+ or VOL- button to select TV.
Press the CH- button to enter the selected menu group.
=> The Channel Settings is selected.
3
4
Press the VOL+ button to enter the selected menu group.
Image
Screen
Setup
Audio
TV
Press the CH- or CH+ button to select Country.
Channel Settings
Press the VOL+ or VOL- button to select your country.
[-VOL+] to scan channels
Auto Search
Program Table
Country
5
Press the CH- or CH+ button to select Auto Search.
Press the VOL+ or VOL- button to start the search.
=> The scan starts.The scanned channels are automatically stored
in the order which reflects their position in the frequency range
(with lowest first and highest last). If you want to stop, press
the MENU button.
AUSTRIA
Program Edit
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Image
Screen
Setup
Audio
TV
6
After channel search is complete, the ProgramTable is displayed.
You can edit channels.
For more details, refer to “EDITING TV CHANNELS” on page 26.
Channel Settings
[-VOL+] to scan channels
Auto Search
Program Table
Country
AUSTRIA
Program Edit
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Channel Scan In Progress
---
Channels Found
105.694 MHz
Exit [MENU]
21
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.1.2
STORINGTV CHANNELS MANUALLY
You can choose whether or not to store each of the channels found
and the program number of each stored channel which you wish to
identify.
Image
Image
Image
Screen
Setup
Audio
TV
Channel Settings
1
2
Press the MENU button on the front panel or remote control.
Auto Search
Program Table
Country
[-VOL+] to scan channels
Press the VOL+ or VOL- button to select TV.
AUSTRIA
Program Edit
Press the CH- button to enter the selected menu group.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
3
Press the CH- or CH+ button to select Program Edit.
Press the VOL+ button to enter the selected menu group.
=> The Program is selected.
4
5
To assign a program number to a channel, find the correct number
by pressing theVOL+ or VOL- button.
Screen
Setup
Audio
TV
Channel Settings
[-VOL+] to scan channels
Auto Search
Program Table
Country
Program Edit
Program
Press the CH- or CH+ button to select Channel.
Press the VOL+ or VOL- button to select the channel to be
stored.
AUSTRIA
001
Move [- CH +]
Select [-VOL +]
Exit [MENU]
6
7
If necessary, re-select the broadcasting system required.
Press the CH- or CH+ button to select System.
Press the VOL+ or VOL- button to select required system
(B/G, D/K, I, or L).
Screen
Setup
Audio
TV
To store the channel and associated program number, select Store
Program by pressing the CH- or CH+ button.
Press the VOL+ or VOL- button.
Program Table
Country
Program Edit
001
Program
051
Exit [MENU]
Fine Tune
Channel
Move [- CH +]
001
Select [-VOL +]
Image
Screen
Setup
Audio
TV
Country
Program Edit
Program
Fine Tune
Channel
001
001
051
System
i
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Image
Screen
Setup
Audio
TV
051
Fine Tune
Channel
001
System
i
Edit Labels
MTS Mode
Store Program
A
- - - -
MONO A
[-VOL+] to Store Settings
Select [-VOL +] Exit [MENU]
Move [- CH +]
22
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
FINETUNINGTV CHANNEL RECEPTION
6.1.3
If the signal is weak or distorted, you may have to fine tune the channel
manually.
Image
Screen
Setup
Audio
TV
1
2
Press the MENU button on the front panel or remote control.
Channel Settings
Auto Search
Program Table
Country
[-VOL+] to scan channels
Press the VOL+ or VOL- button to select TV.
Press the CH- button to enter the selected menu group.
AUSTRIA
Program Edit
3
4
Press the CH- or CH+ button to select Program Edit.
Press the VOL + button to enter the selected menu group.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
To select the channel to be tuned, select Channel by pressing the
CH- or CH+ button.
Press the VOL+ or VOL- button to select required channel.
Image
Screen
Setup
Audio
TV
5
6
Press the CH- or CH+ button to select FineTune.
Press the VOL+ or VOL- button to obtain a good quality of the
picture and sound until you reach the optimal setting.
Program Table
Country
Program Edit
Program
Fine Tune
001
051
Exit [MENU]
Channel
Move [- CH +]
001
Select [-VOL +]
To store your setting, select Store Program by pressing the
CH- or CH+ button.
Press the VOL+ or VOL- button.
Note:
Image
Screen
Setup
Audio
TV
If you are unable to fine tune a channel, check that the System setting
Auto Search
Program Table
[-VOL+] to scan channels
is correct.
Country
Program Edit
Program
001
Fine Tune
Move [- CH +] Adjust [-VOL +]
051
Exit [MENU]
Image
Screen
Setup
Audio
TV
Fine Tune
Channel
051
001
System
Edit Labels
MTS Mode
i
A
- - - -
MONO A
[-VOL+] to Store Settings
Store Program
Move [- CH +]
Select [-VOL +] Exit [MENU]
23
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.1.4
LABELINGTHETV CHANNELS
You can assign an easy-to-remember label to any channel.A label con-
sists of several fields, where each field is a letter, a number, a symbol, or
a blank.When the RECALL button is pressed, the channel label is dis-
played next to the program number.
Image
Screen
Setup
Audio
TV
Channel Settings
[-VOL+] to scan channels
Auto Search
Program Table
Country
1
2
Press the MENU button on the front panel or remote control.
AUSTRIA
Program Edit
Press the VOL+ orVOL- button to select TV.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the CH- button to enter the selected menu group.
3
4
Press the CH- or CH+ button to select Program Edit.
Press the VOL+ button to enter the selected menu group.
To select the channel to be assigned to a new name, select
Channel by pressing the CH- or CH+ button.
Press the VOL+ or VOL- button to select required channel.
Image
Screen
Setup
Audio
TV
Program Table
Country
Program Edit
Program
Fine Tune
Channel
001
5
6
Press the CH- or CH+ button to select Edit Labels.
Press the VOL+ button.
051
Exit [MENU]
001
Select [-VOL +]
Move [- CH +]
Press the yellow or cyan button to select a letter (A~Z or a~z), a
number (0~9), a symbol (!,“, #, $, etc.), or a blank.
Move on to the previous or next field by pressing theVOL+ or
VOL- button.
Image
Screen
Setup
Audio
TV
Program Edit
Program
001
Fine Tune
Channel
051
001
System
Edit Labels
i
A
- - - -
Select [-VOL +] Edit [Y ] and [ C ]
Move [- CH +]
Exit [MENU]
24
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.1.5
CHOOSING A MTS (Multi-ChannelTelevision
Sound) MODE
Depending on the particular program being broadcast, you can listen to
Mono or Stereo.
Image
Screen
Setup
Audio
TV
1
2
Press the MENU button on the front panel or remote control.
Channel Settings
[-VOL+] to scan channels
Auto Search
Program Table
Country
Press theVOL + orVOL- button to select TV.
Press the CH- button to enter the selected menu group.
AUSTRIA
Program Edit
3
4
Press the CH- or CH+ button to select Program Edit.
Press the VOL+ button to enter the selected menu group.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the CH- or CH+ button to select MTS Mode.
Press the VOL+ or VOL- button to select required mode.
It is variable depending on the broadcast.
Image
Screen
Setup
Audio
001
TV
Program
Fine Tune
Channel
• MONO A - MONO B - MONO - AUTO
• MONO A - MONO B - STEREO - AUTO
• BILINGUAL A - BILINGUAL B - BILINGUAL - AUTO
051
001
System
i
Edit Labels
MTS Mode
Move [- CH +]
A
- - - -
AUTO
Select [-VOL +]
Note:
Exit [MENU]
You can simply select required MTS mode by repeatedly pressing the
MTS button on the remote control.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.1.6
EDITINGTV CHANNELS
1
2
Press the MENU button on the front panel or remote control.
Image
Screen
Setup
Audio
TV
Press the VOL+ orVOL- button to select TV.
Press the CH- button to enter the selected menu group.
=> The Channel Settings is selected.
Channel Settings
Program Edit
3
4
Press the VOL+ button to enter the selected menu group.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the CH- or CH+ button to select ProgramTable.
Press the VOL+ or VOL- button.
=> The ProgramTable is displayed.
Image
Screen
Setup
Audio
TV
Deleting unwanted channels
Channel Settings
[-VOL+] to Scan Channels
Auto Search
Program Table
Country
You can delete the channels you do not want to keep.
AUSTRIA
5
Press the CH-, CH+, VOL+, orVOL- button to select the
channel you wish to delete.
Program Edit
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the red button to delete required channel.
ProgramTable
Move [- CH +] and [-VOL +]
Delete [ R ] Change [ G ]
001 ABC01 011 -----
Changing channels
You can change the program numbers of stored channels.
021 -----
022 -----
023 -----
024 -----
025 -----
026 -----
027 -----
028 -----
029 -----
030 -----
002 BBC02
003 CBC03
004 DBC04
005 -----
006 -----
007 -----
008 -----
009 -----
010 -----
012 -----
013 -----
014 -----
015 -----
016 -----
017 -----
018 -----
019 -----
020 -----
6
Press the CH-, CH+, VOL+, or VOL- button to select the
channel you wish to change.
Press the green button.
7
Press the CH-, CH+, VOL+, orVOL- button to select another
channel you wish to change.
Exit [MENU]
Press the green button.
=> The channels are exchanged.
ProgramTable
Move [- CH +] and [-VOL +]
Delete [ R ] Change [ G ]
001 BBC02 011 -----
021 -----
022 -----
023 -----
024 -----
025 -----
026 -----
027 -----
028 -----
029 -----
030 -----
002 CBC03
003 DBC04
004 -----
005 -----
006 -----
007 -----
008 -----
009 -----
010 -----
012 -----
013 -----
014 -----
015 -----
016 -----
017 -----
018 -----
019 -----
020 -----
Exit [MENU]
ProgramTable
Move [- CH +] and [-VOL +]
Delete [ R ] Change [ G ]
001 DBC04 011 -----
021 -----
022 -----
023 -----
024 -----
025 -----
026 -----
027 -----
028 -----
029 -----
030 -----
002 CBC03
003 BBC02
004 -----
005 -----
006 -----
007 -----
008 -----
009 -----
010 -----
012 -----
013 -----
014 -----
015 -----
016 -----
017 -----
018 -----
019 -----
020 -----
Exit [MENU]
26
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.2
PICTURE CONTROLS
ADJUSTING PICTURE SETTINGS
6.2.1
Various picture adjustments can be set using the Picture Adjustment
OSD menu.
Image
Screen
Setup
Audio
1
Press the MENU button on the front panel or remote control.
=> The Image menu is displayed.
Brightness
Contrast
Sharpness
Color
083
052
019
063
050
2
3
Press the CH+ button to enter the selected menu group.
Tint
Image Preset
[-VOL+] to Preset Image
Select [- CH +] Exit [MENU]
Press the CH- or CH+ button to select the option to be adjusted.
Depending on the input source, the following menu’s appear:
Move [-VOL +]
• Brightness - Contrast - Sharpness - Color -Tint
- Image Preset
• Brightness - Contrast - Phase - Frequency
- Sharpness (RGB (PC) mode)
Image
Screen
Setup
Audio
Brightness
083
Adjust [-VOL +]
Exit [MENU]
4
5
Press the VOL+ or VOL- button to select the optimal setting.
Press the MENU button to return to the previous menu.
6.2.2
RESETTOTHE FACTORY DEFAULTS
1
2
Press the CH+ or CH- button to select Image Preset.
Press the VOL+ orVOL- button to reset the picture settings to
Image
Screen
Setup
Audio
the factory defaults.
Brightness
Contrast
Sharpness
Color
083
052
019
063
050
Tint
Image Preset
Image Preset Complete!
Select [-VOL +] Exit [MENU]
Move [- CH +]
27
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.3
SOUND CONTROLS
6.3.1
ADJUSTING SOUND SETTINGS
Various sound adjustments can be set using the Sound Adjustment
OSD menu.
Image
Screen
Volume
Setup
Audio
1
2
3
4
Press the MENU button on the front panel or remote control.
Press theVOL+ or VOL- button to select Audio.
60
Treble
Bass
Balance
Mute
055
072
043
Press the CH- button to enter the selected menu group.
ON
[-VOL+] to Preset Audio
Exit [MENU]
OFF
Audio Preset
Move [- CH +] Adjust [-VOL +]
Press the CH+ or CH- button to select the desired option:
Treble - Bass -Balance
5
Press the VOL+ orVOL- button to adjust the settings.
6.3.2
RESETTOTHE FACTORY DEFAULTS
1
2
Press the CH+ or CH- button to select Audio Preset.
Press the VOL+ orVOL- button to reset the sound settings to
the factory defaults.
Image
Screen
Volume
Setup
Audio
60
Treble
Bass
Balance
Mute
Audio Preset
055
072
043
ON
Audio Preset Complete!
Select [-VOL +] Exit [MENU]
OFF
Move [- CH +]
28
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.4
OSD MENU LANGUAGE
This PDP has multiple OSD Menu languages built-in including English,
French, Spanish, Italian, German, Dutch, and Portuguese.
Image
Screen
Language
Setup
Audio
1
2
3
4
Press the MENU button on the front panel or remote control.
Press the VOL+ or VOL- button to select Setup.
English
SleepTimer
030
OSD Settings
Press the CH- button to enter the selected menu group.
Press theVOL+ orVOL- button to select the required language.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
6.5
POWER SAVE MODE
This PDP is equipped with a Power Save mode under RGB(VGA) or
DVI input modes.When there are no signals detected by the PDP for a
certain time, the PDP will automatically go into sleep mode until signal
is restored.You can select a time period between 10 and 180 minutes.
Image
Screen
Setup
Audio
Language
English
SleepTimer
OSD Settings
030
1
2
3
4
5
Press the MENU button on the front panel or remote control.
Press the VOL+ orVOL- button to select Setup.
Move [- CH +] Adjust [-VOL +]
Exit [MENU]
Press the CH- button to enter the selected menu group.
Press the CH+ or CH- button to select SleepTimer.
Press the VOL+ orVOL- button to select the required time
interval.
Note:
You can simply select required time interval by repeatedly pressing the
SLEEP button on the remote control.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.6
MINIMIZE SCREEN STICKING
If the fixed pattern is displayed for a long time, a difference in
brightness is caused around the lighting area and non-lighting area due
to deterioration in the fluorescent substance used in the plasma
module. It comes to be recognized as image sticking.This feature allows
you to make the occurrence of image sticking as slow as possible.
Image
Screen
Setup
Audio
Size
Freeze
AUTO
OFF
OFF
ON
ON
Sticking Minimum
1
2
3
4
5
Press the MENU button on the front panel or remote control.
Press the VOL+ orVOL- button to select Screen.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
Press the CH- button to enter the selected menu group.
Press the CH+ or CH- button to select Sticking Minimum.
Press the VOL+ or VOL- button to select the required option
(OFF or ON).
6.7
FREEZINGTHE CURRENT PICTURE
You can freeze the picture when watching a television program.
1
2
3
4
5
Press the MENU button on the front panel or remote control.
Press theVOL+ or VOL- button to select Screen.
Press the CH- button to enter the selected menu group.
Press the CH- or CH+ button to select Freeze.
Image
Screen
Setup
Audio
Size
AUTO
OFF
OFF
Freeze
ON
ON
Sticking Minimum
Press the VOL+ orVOL- button to select required option (OFF
Move [- CH +]
Select [-VOL +]
Exit [MENU]
or ON).
Note:
Simply press the FREEZE button on the remote control. then current
picture is stilled.To return to normal viewing press it again.
6.8
ON-SCREEN DISPLAYTIMEOUT
You can select for how long the OSD will be shown.
1
2
3
4
5
6
7
Press the MENU button on the front panel or remote control.
Press the VOL+ orVOL- button to select Setup.
Image
Screen
Language
Setup
Audio
English
SleepTimer
030
Press the CH- button to enter the selected menu group.
Press the CH- or CH+ button to select OSD Settings.
Press the Vol+ button to enter the selected menu group.
Press the CH- or CH+ button to select Timeout.
OSD Settings
070
020
Transparency
Timeout
Move [- CH +] Adjust [-VOL +]
Exit [MENU]
Press the VOL+ or VOL- button until you reach the optimal setting
6.9
ADJUSTINGTHE MENUTRANSPARENCY
You can give the transparency OSD background.
1
2
3
4
5
Press the MENU button on the front panel or remote control.
Press theVOL+ orVOL- button to select Setup.
Image
Screen
Setup
Audio
Language
English
SleepTimer
OSD Settings
030
Press the CH- button to enter the selected menu group.
Press the CH- or CH+ button to select OSD Settings.
070
Transparency
Timeout
020
Press the VOL+ button to enter the selected menu group.
Move [- CH +] Adjust [-VOL +]
Exit [MENU]
=> The Transparency is selected.
6
Press the VOL+ or VOL- button until you reach the optimal setting.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
CHANGINGTHE SCREEN SIZE
6.10
You can select the screen size which best corresponds to your viewing
requirements.
Image
Screen
Setup
Audio
1
2
3
Press the MENU button on the front panel or remote control.
Size
Freeze
AUTO
OFF
OFF
ON
ON
-
Press the VOL+ or VOL button to select Screen.
Sticking Minimum
-
Press the CH button to enter the selected menu group.
=> The Size is selected.
Move [- CH +]
Select [-VOL +]
Exit [MENU]
-
4
Press the VOL+ or VOL button to select required screen size.
AUTO - FILL ALL - FILL ASPECT - ZOOM -
ANAMORPHIC - *WIDE
Image
Screen
Size
Setup
Audio
( *WIDE is only available when the split screen mode is
not selected.)
AUTO
Select [-VOL +]
Exit [MENU]
Note:
You can simply select required screen size by repeatedly pressing the
I.SIZE (Image SIZE) button on the remote control.
6.11
SETTING UPTHE PC INPUT
Preset to the RGB mode by pressing the INPUT button.
1
2
3
Press the MENU button on the front panel or remote control.
Image
Screen
Setup
Audio
-
Press the VOL+ or VOL button to select Screen.
Size
AUTO
H Position
V Position
Auto
035
044
-
Press the CH button to enter the selected menu group.
Freeze
Sticking Minimum
Move [- CH +]
OFF
OFF
Select [-VOL +]
ON
ON
Exit [MENU]
Adjusting the PC screen automatically
-
1
Press the CH or CH+ button to select Auto.
-
2
Press the VOL+ or VOL button.
=> The screen quality and position are automatically adjusted.
Image
Screen
Setup
Audio
H Position
035
Note:
Adjust [-VOL +]
Exit [MENU]
You can adjust the PC screen automatically by simply pressing the
AUTO button on the remote control.
Selecting the position of the PC screen if it does not fit the
PDP screen
-
1
Press the CH or CH+ button to select H Position or
V Positing.
-
2
Press the VOL+ or VOL button to fit the TV screen until you
reach the optimal setting.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.12
TELETEXT
The Teletext service is available in many countries under a variety of names
(TOP Text, Fastext, FLOF test,Videotext). It is provided as a free service by
some television broadcasters.This service provides a real wealth of
information, available at any time, on weather, sporting results, news, games,
etc.The information is presented in pages organized in topics specified in
color on the screen and you can access this information by simply pressing
the buttons of the same color on the remote control.
This product doesn't have a tuner inside, but an external settop box may
still contain channels with teletext information.
AccessingTeletext
1
Press the CH+ or CH- button to select the required source.
2
Press the TEXT button (Œ) on the remote control.
=> Teletext opens on the index page (100).
3
Press the TEXT button again to exit.
Select a specificTeletext page
1
Enter the three-digit Teletext page number using the numeric
buttons.
=> The current page is displayed. If the selected page is linked to
with several secondary pages these pages are displayed in
sequence.
2
3
Press the FREEZE button (∏) to freeze the display on a given
page.
To resume, press the FREEZE button again.
DisplayTELETEXT index
Press the INPUT button (´) to display the TELETEXT index.
1
Fastext
Press the red, green, yellow and blue buttons (ˇ) on the
1
remote control to easily access the topic and relevant pages you
want.
Page Down (AUTO)
1
Press the AUTO button (¨) to display the previous TELETEXT
page.
Zoom (I. SIZE)
1
Press the I. SIZE button (ˆ) once to zoom in on the top part of
the screen.
2
Press twice to zoom in on the bottom part of the screen and
three times to return to normal display.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
Page Up (MTS)
Press the MTS button (Ø) to display the next TELETEXT page.
1
FREEZE
1
Press the FREEZE button (∏) on the remote control to freeze
the current page, preventing update and subpage display.
2
Press the FREEZE button again to cancel.
Reveal
Press the Reveal button (”) to hide page information. Press the
button again to unhide.
1
Sub-page
Press the sub-page button (’) to display a secondary page by
entering its number.
1
Subtitles
Some channels provide subtitles for some of their program through
Teletext.The numbers of the relevant pages are specified on the
Teletext index page.
1
Enter the number of the relevant page to display the subtitles.
=> The subtitles appear in the TV picture.The header disappears
after a couple of seconds.
2
3
Press any button on the remote control (except TEXT or the
volume adjustment buttons) to display the subtitles again.
Press the TEXT button (Œ) to return to TV mode.
Note:
In Teletext mode, volume controls remain available, but the relevant
symbols are not shown on the screen.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
6.13
VIEWINGTHE PICTURE IN PICTURE (PIP)
You can display a sub-picture with the main picture. In this way you can
watch PDP the video input from any connected devices while watching
other video input.
Selecting a PIP mode
Press the SPLIT button repeatedly to select required mode.
The available modes are displayed in the following order.
NORMAL - PIP - PBP
Split Screen
NORMAL
Selecting a location of the sub-picture
Press the LOCATE button.
Press the VOL , VOL+, CH , or CH+ button to select required loca-
-
-
tion. It is available in PIP mode only.
Selecting a size of the sub-picture
Press the SIZE button.
-
Press the VOL or VOL+ button to select required size.
It is available in PIP mode only.
PIP Locate
PIP Size
34
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
Swapping the main picture and the sub-picture
Press the SWAP button.
The main picture and the sub picture are interchanged.
It is available in PIP and PBP mode only.
Sub Input
SCART 1
SCART 2
X
VIDEO
X
S-VIDEO
X
Main Input
TV
X
X
SCART 1
SCART 2
VIDEO
X
X
X
X
X
X
S-VIDEO
COMPONENT
RGB
X
X
X
X
X
X
X
X
X
DVI
Swapping the audio of the main or sub-picture
Press the A.SWAP (Audio SWAP) button repeatedly.
You can hear the audio of the main or sub-picture alternately.
It is available in PIP and PBP mode only.
Selecting the main picture or the sub-picture
Press the S.SELECT button repeatedly.
You can select the main or sub-picture alternately and adjust the status
of selected picture.
It is available in PIP and PBP mode only.
PIP Settings
Sub Input
SCART 1
X
SCART 2
X
VIDEO
S-VIDEO
Main Input
TV
SCART 1
SCART 2
VIDEO
X
X
S-VIDEO
COMPONENT
RGB
DVI
“
” Max. : 480p, 576p, 1024x768/60Hz
In the PIP mode, the sub input source is differently defined
for the default value (scart1 or scart2) depending on your PDP model.
6.14
REMOTE MANAGEMENT
This display can be managed remotely through the RS232 9-pin port,
by using a Serial Interface Communication Protocol (SICP).
The specifications of the SICP protocol can be found in a separate
document, called "SICP User Manual".
35
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
7.
INPUT MODE
VGA Resolution
Active Resolution
H Pixels V Lines
Standard
Resolution
Refresh Rate
Aspect ratio
Pixel Rate
Stand for Mode
60
72
75
60
60
72
75
60
70
25.175 MHz
31.5 MHz
31.5 MHz
Video Graphic Array
WideVideo Graphic Array
SuperVGA
VGA
16:9
16:9
16:9
640
848
800
480
480
WVGA
40 MHz
50 MHZ
49.5 MHz
65 MHz
SVGA
600
SuperVGA Extended
Graphic Array
XGA
768
75 MHz
16:9
16:9
1024
1280
75
60
78.5 MHz
108 MHz
Super XGA
SXGA
1024
SDTV Resolution
Active Resolution
H Pixels V Lines
Standard
Resolution
Refresh Rate
Pixel Rate
Stand for Mode
Aspect ratio
480i
480p
576i
29.97 Hz
59.94 Hz
25 Hz
13.5 MHz
27 MHz
4 : 3
4 : 3
720
720
480
576
Modified DVB Mode
13.5 MHz
27 MHz
Modified PAL Standard
50 Hz
576p
HDTV Resolution
Active Resolution
H Pixels V Lines
Standard
Resolution
Refresh Rate
Pixel Rate
Aspect ratio
Stand for Mode
30 Hz
50 Hz
25 Hz
30 Hz
720p
1280
1920
720
74.25 MHz
16 : 9
16 : 9
Normally DVB Mode
Normally ATSC Mode
1080
74.25 MHz
1080i
Not supported
1080p
• The PC text quality is optimum in XGA mode (1024 x 768, 60Hz).
• When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).
•Your PC display screen might appear different depending on the manufacture (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a display.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal). In some
cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC
is disconnected). If so, press the INPUT button to enter the video mode.Also, make sure that the PC is connected.
• When connecting a notebook PC to the PDP, make sure that the PC screen is displayed through only the PDP
(Otherwise, random signals might appear).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable
connections.
• The display settings table complies to the IBM/VESA standards, and based on the analog input.
• The DVI support mode is regarded as same to the PC support mode.
• The best timing for the vertical frequency to each mode is 60Hz.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
8.
TECHNICALS SPECIFICATIONS
Display
Item
Specifications
42" (920.1(H) x 518.4(V) 0.5mm)
16:9
Screen Size (Active Area)
Aspect ratio
852 (H) x 480 (V)
Number of pixels
Pixel pitch
1. 080 (H) x 1. 080 (V) [mm]
1 billion (Option)
Displayable Colors
Brightness
1500 cd/m2
10,000:1
Contrast Ratio
Color Temperature
Viewing Angle
9500 K
Over 160 degrees
38
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
In / OutTerminals
Item
Specifications
Internal speaker
10W(L) + 10W(R) [RMS] /8Ω 2Way 2Speaker
10W(L) + 10W(R) [RMS] /8Ω 2Way 4Speaker
TXD + RXD(1:1)
Speaker Output
External speaker (option)
D-Sub Jack x 1 (9 pin)
DVI Jack x 1 (24 pin)
RCA Jack x 1
RS-232C
DVI Input
Digital RGB :TMDS MAX : 720p,1080i,1280x1024/60Hz(SXGA)
Audio:0.5V[rms](Normal) / 2Channel(L+R)
Analog RGB:0.7V[p-p](75Ω), H/CS/V:TTL(2.2kΩ), SOG:1V[p-p](75Ω)
MAX:720p, 1080i, 1280x1024/60Hz(SXGA)
Audio:0.5V[rms](Normal) /2 Channel (L + R)
Y:1V[p-p](75Ω), Pb/Cb:0.7V[p-p](75Ω), Pr/Cr:0.7V[p-p](75Ω)
480i, 576i, 480p, 576p, 720p, 1080i
D-Sub Jack x 1 (15 pin)
RGB Input
RCA Jack x 1
RCA Jack x 1
Component Input
Audio: 0.5V[rms](Normal) / 2 Channel (L + R)
Video : 1V[p-p](75Ω)
RCA Jack x 1
Monitor Output
S-Video Input
Video Input
Scart
Audio : 0.5V[rms](Normal) /2 Channel (L + R)
Y:1V[p-p] (75Ω), C:0.286V[p-p] (75Ω)[NTSC]
Y:1V[p-p] (75Ω), C:0.300V[p-p] (75Ω)[PAL/SECAM]
Video : 1V[p-p](75Ω)[NTSC / PAL / SECAM]
Audio : 0.5V[rms](Normal)/2 Channel(L + R)
Mini DIN Jack x 1 (4 pin)
RCA Jack x 1
Scart Jack x 2 (21 pin) [Full x 1, Half x 1] Video : 1V[p-p] (75Ω)
Y : 1V[p-p] (75Ω), C : 0.3V[p-p](75Ω)
RGB : 0.7V[p-p] (75Ω)
Audio : 0.5V[rms](Normal)/2 Channel(L + R)
UHF/VHF (75Ω) [Unbalanced]
DIN - Type x 1
Antenna Input
Channel : 48.25 MHz ~ 863.25 MHz
System : PAL
-
B/G, D/K, I and SECAM
-
B/G, D/K, L/L’
39
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
General
Item
Specifications
AC 100V ~ 240V, 50/60 Hz
250 W
Power Supply
Power Consumption
Dimension ( With Stand )
[W mm x H mm x D mm]
Weight ( Without Stand )
1028 x 625 x 89.8 (A)
29 kg
Environment Condition
Item
Specifications
Operational
0 ~ 40
Temperature
Humidity
Storage
-20 ~ 60
Operational
Storage
20 ~ 80% RH (No condensation)
10 ~ 90% RH (No condensation)
Operational
Storage
800 ~ 1100 hPa (Al titude: 0 ~ 2,000 m)
700 ~ 1100 hPa (Al titude: 0 ~ 3,000 m)
Pressure
External Speaker (Option)
Specifications
113 mm x 626.6 mm x 82.2 mm
5 kg (L + R )
Dimension (W x H x D)
Weight
2 Way 4 Speaker System
10 W (RMS)
Type
Input
8 Ohm
Impedance
87 dB/W/M
Output Sound Pressure
Frequency Response
45 Hz ~ 20 KH z
Internal Speaker (Option)
Specifications
2 Way 2 Speaker System
10 W (RMS)
Type
Input
8 Ohm
Impedance
88 dB/W/M
Output Sound Pressure
Frequency Response
170 Hz ~ 20 KHz
40
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
9.
CLEANING ANDTROUBLESHOOTING
9. 1
CLEANING
Cautions When Using the Plasma Display
ꢀ
Do not bring your hands, face or objects close to the ventilation
holes of the plasma display.Top of plasma display is usually very hot
due to the high temperature of exhaust air being released through
the ventilation holes. Burns or personal injuries may occur if any
body parts are brought too close. Placing any object near the top
of the display could also result in heat related damages to the
object as well as the display itself.
ꢀ
ꢀ
Be sure to disconnect all cables before moving the plasma display.
Moving the display with its cables attached may damage the cables
and thus case fire or electric shock danger.
Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any type of cleaning or maintenance
procedure.
Front Panel Cleaning Instructions
ꢀ
The front of the display has been specially treated.Wipe the
surface gently using only a cleaning cloth or a soft, line-free cloth.
ꢀ
If the surface is particular dirty, soak a soft, line-free cloth in a mild
detergent solution.Wring the cloth to remove excess liquid.Wipe
the surface of the display to remove dirt.Then use a dry cloth of
the same type to dry.
ꢀ
ꢀ
Do not scratch or hit the surface of the panel with fingers or hard
objects of any kind.
Do not use volatile substances such as insert sprays, solvents and
thinners.
Cabinet Cleaning Instructions
ꢀ
If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
ꢀ
If the cabinet is extremely dirty, soak a lint-free cloth in a mild
detergent solution.Wring the cloth to remove as much moisture as
possible.Wipe the cabinet. Use another dry cloth to wipe over
until the surface is dry.
ꢀ
Do not allow any water or detergent to come into contact with
the surface of the display. If water or moisture gets inside the unit,
operating problems, electrical and shock hazards may result.
ꢀ
ꢀ
ꢀ
Do not scratch or hit the cabinet with fingers or hard objects of
any kind.
Do not use volatile substances such as insert sprays, solvents and
thinners on the cabinet.
Do not place anything made from rubber or PVC near the cabinet
for any extended periods of time.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
9.2 TROUBLESHOOTING
Symptom
Possible Cause
Remedy
1. Plug in the power cord.
2. Make sure the power switch is switched on.
3. Connect a signal connection to the PDP.
1.The power cord is disconnected.
2.The main power switch on the back of the PDP is
not switched on.
No picture is displayed
3.The selected input has no connection.
4.The PDP is in standby mode in RGB mode.
Caused by surrounding electrical appliances,
cars/motor cycles or fluorescent lights.
Move the PDP to another location to see is the inter-
ference is reduced.
Interference displayed on
the PDP or audible noise
is heard
The signal cable is not connected properly.
Make sure that the signal cable is attached firmly to
the back of the PDP.
Color is abnormal
1.The signal cable is not connected properly.
2.The input signal is beyond the capabilities of the
PDP.
1. Make sure that the signal cable is attached firmly.
2. Check the video signal source to see if it is beyond
the range of the PDP. Please verify its specifications
with this PDP's specification section.
Picture is distorted with
abnormal patterns
1. If under RGB mode, the H-Size andV-Size is
incorrectly set.
2. If under AV1,AV2, or Component with 480i input,
the 4:3 WIDE mode is switched on.
1. Use H-Size andV-Size to adjust the size of the
video.
2. Use the I.SIZE button to scroll through various full
screen modes.
Display image doesn't fill
up the full size of the
screen
Improperly connected source signal cable.
Make sure that both video inputs and sound inputs
are correctly connected.
Can hear sound, but no
picture
1. Improperly connected source signal cable.
2.Volume is turned all the way down.
3. MUTE is turned on.
1. Make sure that both video inputs and sound inputs
are correctly connected.
Can see picture but no
sound is heard
2. Use the VOL+/ button to hear sound.
-
3. Switch MUTE off by using the MUTE button.
Some pixels of the plasma display may not turn on
This PDP is manufactured using an extremely high
level of precision technology:
Some picture elements do
not light up
however, sometimes some pixels of the PDP may not
display.
This is not a malfunction. Please see the enclosed
warranty card for more information.
A still picture is displayed for an over extended
period of time.
Do not allow a still image to be displayed for an
extended period of time as this can cause a perma-
nent after-image to remain on the PDP.
After-Images can still be
seen on the PDP after the
PDP is powered off.
(Examples of still
pictures include logos,
video games, computer
images, and images
displayed in 4:3 normal
mode)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
10. LIMITED WARRANTY (EUR)
TwoYear Free Labor
TwoYear Free Parts
WHO IS COVERED?
You must have proof of the date purchased to receive warranty
service.A sales receipt or other document showing the date that you
purchased the product is considered proof of purchase.
WHAT IS COVERED?
Warranty cover age begins the day you buy your product. For two
years thereafter, all defective parts will be repaired or replaced and
labor is free.After two years from the day of purchase, you pay for the
replacement or repair of all parts, and for all labor charges.All parts,
including repaired and replaced parts, are covered only for the original
warranty period.When the warranty on the product expires, the
warranty on all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
ꢀ
labor charges for removal, installation or setup of the product,
adjustment of customer controls on the product, and installation or
repair of antenna systems outside of the product.
ꢀ
product repair and/or part replacement because of misuse,
accident, unauthorized repair or other cause not within the control
of Philips Consumer Electronics Europe.
ꢀ
ꢀ
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
ꢀ
ꢀ
incidental or consequential damages resulting from the product.
(some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to
you.This includes, but is not limited to, prerecorded material,
whether copyrighted or not copyrighted.)
modifications or adaptations to enable the product to operate in
any country other that the country for which it was designed,
manufactured, approved and/or authorized, or the repair of
products damaged by these modifications.
ꢀ
ꢀ
ꢀ
normal wear and tear (decreased light output of PDP module)over
the product's lifetime.
phosphor burn. Do not display static images for prolonged periods,
otherwise phosphor burn might appear on part of the panel.
limited quantity of cells (fine pixel elements) that do not produce
light, or that remain lit after they should have turned off.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is
officially distributed by Philips Consumers Electronics Europe.
In countries where Philips Consumers Electronics Europe does not
distribute the product, the local Philips service organization will
attempt to provide service (although there may be a delay if the
appropriate spare parts and technical manual(s) are not readily
available).
MAKE SUREYOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase.Attach it to this owner's manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
BEFORE REQUESTING SERVICE...
Please check your owner's manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET WARRANTY SERVICE,
OR IFYOU HAVE QUESTIONS...
Please contact Philips at one of the telephone numbers below:
Austria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0820 901115
Belgium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 070 253 010
Denmark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 25 87 61
Finland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 2290 1908
France . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 9165 0006
Germany . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0180 5 007 532
Greece . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00800 3122 1223
Ireland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 601 1161
Italy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 404 042
Luxembourg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 84 3000
Netherlands . . . . . . . . . . . . . . . . . . . . . . . . . . 0900 0400 063
Norway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 70 82 50
Portugal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 359 1440
Spain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 902 888 785
Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 632 0016
Switzerland . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 2310 2116
United Kingdom . . . . . . . . . . . . . . . . . . . . . . . 0906 1010 017
Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 800 200-0880
Repair must be performed by an authorized service center or a factory
service center. If you do not live near a factory service center, contact
your dealer. If you dealer is an authorized service center, he will
arrange repair.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual BDS4241R
REMEMBER...
Please record the model and serial numbers found on the product
below.Also, please fill out and mail your warranty registration card
promptly.
It will be easier for us to notify you if necessary.
MODEL#_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SERIAL#_ _ _ _ _ _ _ _ _ _ _ _ _ wo _ _ _
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|