USB VoIP Gateway
SKD-200
User’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Part No. EM-SKD200V1
Index
Chapter 1 Introduction....................................................................................................................4
SKD-200 Features ............................................................................................................4
DECT Features.................................................................................................................4
Package contents ..............................................................................................................5
System requirements........................................................................................................5
Chapter 2 SKD-200 Setup ...............................................................................................................6
2.1 Hardware Details..................................................................................................................6
SKD-200 Hardware..........................................................................................................6
LED Display......................................................................................................................6
Port Connection................................................................................................................7
DECT Introduction..........................................................................................................7
DECT Handset Installation.............................................................................................8
2.2 DECT Screen Display........................................................................................................10
Chapter 3 DCT-100 handset operation ..................................................................................15
3.1 Icon Status.................................................................................................................15
3.2 Basic Function ..........................................................................................................15
Appendix A Product Specification .........................................................................................18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
Thank you for choosing SKD-200 USB VoIP Gateway, this product can be used as like as normal PSTN
phone plus Skype phone feature. It bundles with a DECT handset to register to SKD-200 for making Skype/
PSTN anywhere. SKD-200 can support computer / laptop to make Skype VoIP calls around the world; also
make SkypeOut call for lower phone billed.
SKD-200 Features
•
•
•
•
•
Free Internet Call from Skype to Skype
Switch to browse the Skype contact list on DECT handset
Selective call between Skype/ PSTN
USB1.1 compatible
Support USB power or external power
DECT Features
•
•
•
•
•
•
•
DECT & GAP Compatible
Base can register up to 8 Handsets
Intercom call during external call, Call transfer between • handsets , three-way telephone meeting
CID 50 locations
Redial memory: 3 locations, 20 digits
Adjustable ringer volume & melody
100 hours standby time, 10 hours talk time
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Hands-Free, Mute function
Call duration time meter
Transmitted distance: up to 50~200m indoor / up to 300m outdoor
Package contents
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
SKD-200 Base x 1
Adaptor for SKD-200, 5V DC x 1
DECT handset x 1
Charger for DECT handset x 1
Adaptor for DECT handset, 9V DC x 1
USB cable x 1
Telephone line (RJ-11) x 1
AAA Rechargeable batteries x 3
Belt clip x 1
Quick Guide
Installation CD-ROM
System requirements
Minimum System Requirements：
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Microsoft Windows 2000/ XP/2003 server
400MHz CPU
128MB RAM
15MB free Disk Space
CD-ROM drive
Internet connection (any broadband: :ADSL or Cable )
Standard telephone landline subscription (PSTN)
Recommended System Requirements
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Microsoft Windows 2000/ XP/2003 server
1GHz CPU
256MB RAM
30MB free Disk Space
CD-ROM drive
Internet connection (any broadband: ADSL or Cable)
Standard telephone landline subscription (PSTN)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 SKD-200 Setup
2.1 Hardware Details
SKD-200 Hardware
LED Display
LED Indicators
Descriptions
LED will light when SkD-200 utility and hardware is installed properly
LED will light when Skype VoIP is talking
Ready
VoIP
LED will light when PSTN line is in use
PSTN
Power
LED will light when USB or Adapter power is on
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Port Connection
Port
Descriptions
Line
For connecting to PSTN line
Phone
USB
For connecting to a phone set
For connecting to a computer or laptop
DC5V
Adapter 5V in (For enhance the power when USB hub is used)
DECT Introduction
Overview of DECT handset DCT-100
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Descriptions
Intercom conversation mode
INT
Adjust the volume level during the conversation and menu selection on
the LCD display
Last Number Redial
Hang on / up telephone or pressing until to enable the speaker.
Cancel and Clear
C
Power on / off
R
The function is as the same as the general phone set
Enter Skype mode
Number 0 –9 and #
＊＃
DECT Handset Installation
The three rechargeable Ni-MH batteries (AAA size) come with your phone. Install the batteries before using your
phone.
1. Slide the battery cover in the direction of the arrow and pull it out.
2. Remove old batteries, if any, and insert new batteries as indicated, matching correct polarity (+, -).
3. Replace the battery cover, slide the cover up until it snaps shut.
ꢁ Thisphonewon'tworkbyitself.Itshouldberegistered
to the main base unit inside the SKD-200
ꢁ Beforeinitialusing,itshouldbechargedfor24hours.
ÍNote
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ Reversing the orientation may damage the handset.
ꢁ The battery needs to be replaced if it does not recover
its full storage capacity after recharging.
ꢁ Whenreplacingbatteries,alwaysusegoodqualityNi-MH
re-chargeable AAA size batteries.
ÍNote
ꢁ Never use other batteries or conventional alkaline
batteries.
Using Headset (optional)
The headset jack is located in the middle right side of
the handset and is 2.5mm standard plug.
Simply plug the headset into the jack and the headset
will be activated.
Note:
When the headset is plugged into the headset jack,
the microphone on the handset will be deactivated.
Charger
Connect the modular end of the power adapter to the
power jack of the charger, and plug the other end into
a standard AC wall outlet.
Charging Handset
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before initial operation, YOU SHOULD FULLY
CHARGE THE HANDSET for 24 hours.
To charge the handset, just place it on the charger.
When charging, the handset is automatically turned
on and the battery icon on the display will blink.
2.2 DECT Screen Display
This area displays in-use information such as the caller's number, menus, call
duration, etc.
In standby mode, the display will show the signal strength icon, battery status
icon, handset and base number.
Mute icon:
Signal strength icon:
This icon is always displayed when your phone is on,
This icon indicates that the phone is in mute
conversation mode.
and shows the current signal strength. More bars
indicate more signal strength.
Line icon:
Lock icon:
This icon indicates that the key lock function is
The icon is displayed when the line is engaged. L1
means PSTN line is engaged. L2 means Skype VoIP
line is engaged. L3 means Intercom is engaged.
•Intercom icon
activated.
In use icon:
This icon indicates that the phone is in use mode.
This icon indicates that the phone is in the intercom
conversation mode.
Operation icon
Speakerphone icon:
This icon indicates that the phone is in speakerphone
This icon indicates that the phone is in the operation
mode.
mode.
Caller ID icon
Hot call
This icon indicates that there is a new call. To view the This icon indicates that the hot call function is
call, access the Caller ID menu.
activated.
Battery status icon
This icon is displayed at all times when your phone is on, and shows the level of your battery charge. The
more bars, the greater the charge. During charging, the icon will flash.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Step5:
Finish setup and Run
SKS-200 utility
Step6:
Fist time to run SKD-200, the
Skype will show the
message, please choose
Allow this program to use
Skype
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Step7:
The SKD-200 utility will
check whether the status
(Skype and Hardware) is ok
or not.
Note: Make sure the
SKD-200 device is
connected and Skype is
online on this computer or
notebook.
Step8:
First time running SKD-200,
please also check the sound
devices on Skype
Go to toolsꢂoptions
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step9:
In Sound Devices please
make sure:
Audio In ꢂUSB device
Audio out ꢂUSB device
Ringing ꢂUSB device
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 DCT-100 handset operation
3.1 Icon Status
The Hardware and Skype are running properly.
The Hardware or Skype are not ready.
3.2 Basic Function
Turn Handset On/Off
1. To turn the handset on when the display is off, press and hold the R button.
2. To turn the handset off, press and hold the R button until "Good-Bye"
displays. Then the display will turn off.
Download Skype
contact list or phone
book to DECT
Handset
1. Pick up the handset and press the
button.
2. Dial ＊＃ to enter skype mode
3. Dial number 1 to switch phone book step by step, and press ＃ to make a
call
4. Dial number 0 to switch contact list step by step , and press ＃ to make a
call
5. Dial 2~9 to switch contact list (account name) form A~Z letters step by step ,
and press ＃ to make a call
6. To end the call, either press the
charger.
button or replace the handset on the
button.
Make a Speed dial
1. Pick up the handset and press the
2. Dial ＊(speed dial number)＃, ex: *66#
3. To end the call, either press the
charger.
button or replace the handset on the
Make a SkypeOut call
( without smart
1. Pick up the handset and press the
button.
2. Dial ＊00+country code+ area code+ telephone number＃
country code )
3. To end the call, either press the
charger.
button or replace the handset on the
1. Input 00+ country code in the SKD-200 utility Country Code column, ex:
Make a SkypeOut call
15
Download from Www.Somanuals.com. All Manuals Search And Download.
00886 (Taiwan’s country code is 886)
2. Pick up the handset and press the
( with smart country
code )
button.
3. Dial ＊area code + telephone number＃
4. To end the call, either press the
charger.
button or replace the handset on the
Make a PSTN Call
1. Pick up the handset and press the
2. Dial a PSTN phone number.
button.
3. To end the call, either press the
charger.
button or replace the handset on the
Receiving a Call
1. When a call is coming, press button
to answer it.
2. To end the call, either press the
charger.
button or replace the handset on the
Using Speaker Phone
1. To turn the speakerphone on, press
appears on the display.
and hold the button until the icon
2. To turn the speakerphone off, press and hold the
disappears on the display.
button until the icon
Muting the
1. To mute the microphone, press the
button while
button once more.
on the display.
button to adjust the volume level.
icon appears.
Microphone
2. To turn to the normal mode, press
Note: In the mute mode, the icon will appear
1. Press or
Adjusting Voice
Volume
Note: During a call, you can adjust the earpiece volume from level 1 to 9.
1. Turn on USB or Adapter power (the base will open to register for 1 minutes)
Register Handset
2. Press
button to go to HS register, press INT button to enter.
3. Select the desired DECT base (Base1 for example). Press INT key,
DCT-100 will display Searching…. on the LCD screen
4. Wait till a machine hardware ID shows up, ex: 002F5-11708H, then press
INT
5. When machine prompts for PIN number, inert PIN number 1590 then press
INT, then DCT-100 will start to register to base and showing Searching….
6. Once the registration is completed, the DCT-100 will show HS x, Base y on
the screen. (x is the registered handset number and y is the registered
DECT base.)
Note: Registration is available
1. Power off the DCT-100 handset.
Clear Registration
2. Press the INT button and R power on button together, and DO NOT release
the buttons till the LCD displays "F->clear Subs"
3. Press the
button to clear the handset base settings.
4. Wait till "Not Sub" displayed; it is now not registering to any DECT base.
Transfer Call
1. During handset 1 (HS1) conversation, press the INT button and enter the
16
Download from Www.Somanuals.com. All Manuals Search And Download.
desired handset number. (in this sample, we press the 2 to transfer the call
to HS2)
2. The desired handset 2 (HS2) will ring; press the
call.
button to answer the
3. At this moment, press the
button on handset 1 (HS1), the voice call is
now transferred to the handset 2 (HS2).
4. If the handset 2 not answer the call, and you’d like to cancel the transfer. On
handset 1 (HS1), press the INT button, the call will be re-connected handset
1 (HS1) again.
1. During handset 1 (HS1) conversation, press the INT button and enter the
desired handset number. (in this sample, we press the 2 to transfer the call
to HS2)
Conference Call
2. The desired handset 2 (HS2) will ring, press the
call.
button to answer the
3. At this moment, press and hold the # key for 3 seconds on HS1, and the
desired handset HS2 will be joined in the voice conferencing.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Product Specification
DCT-100 DECT handset specifications
Frequency
1880 ~ 1895 MHz
Channel
10 Channel
Bandwidth
1.728Mhz
Modulate Mode
Output power
Data transfer
Audio decode
GFSK
10mW, average output per channel
1.152Mbps
ADPCM (32Kbps)
Outdoor Max 300m
Indoor Max 50m
Distance (Depended the environment)
Using Time
Standby: 100 hours
Talking: 10 hours
Power Supply Required
Environmental condition
Base unit: Output 5V/50Hz
Handset: Output 9V/50Hz
Nominal temperature: 0℃~ 40℃
Relative humidity: 10% ~ 95%
Atmospheric pressure: 86KPa ~ 106KPa
Environmental noise: ≦60 dB(A)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|