AJL305
Clock Radio
Register your product and get support at
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Controls / Power supply
1
Controls (See
)
Power supply
1
2
Connect the supplied power adapter to the
set's DC IN 9V socket and to the power
socket.
Alarm
1
2
– activates, or deactivates alarm
REPEAT ALARM/BRIGHTNESS
CONTROL
Disconnect the power adapter if you want
to switch off the set completely.
– repeats alarm in 9-minute interval
– adjusts brightness of LCD display
Helpful hints:
CLOCK
– switches to clock mode
–
–
To avoid damage to the set, use only the
adapter supplied!
The type plate is located on the rear of the
set.
3
4
5
6
7
8
9
0
!
@
TUNER
– switches to tuner mode
PHOTO
– switches to photo mode
Mini USB port
– connects to a USB port on PC
REC
– switches to voice memo recording
MIC
– records voice memos
VOL
– adjusts volume level
DC IN
– socket for DC 9V adapter
Pigtail
– FM antenna to improve reception
RESET
– press if the set does not react to
operation of any button
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Congratulations on your purchase and
welcome to Philips!
Environment Information
All unnecessary packaging material has
been omitted.The packaging can be easily
separated into three materials: cardboard,
polystyrene and plastic.
To fully benefit from the support that
Philips offers, register your product at
Your set consists of materials which can
be recycled if disassembled by a specialized
company. Please observe the local regulations
regarding the disposal of packaging, dead
batteries and old equipment.
Supplied accessory
– 1 X certified power adapter (Model: DSA-
9W-09 FUK 090100 Input: 100-240V
~50/60Hz 0.3A, Output: +9V 1A)
Disposal of your old product
Restoring the set
Your product is designed and
manufactured with high quality
materials and components, which
can be recycled and reused.
You can restore factory settings if the set
does not react to any operation or you want
to restore all settings.
When this crossed-out wheeled
bin symbol is attached to a
Reset
product it means the product is covered
by the European Directive 2002/96/EC.
Please inform yourself about the local
separate collection system for electrical and
electronic products.
– Press and hold RESET with a ballpoint or
other thin sticks.
Master reset
Please act according to your local rules and
do not dispose of your old products with
your normal household waste.The correct
disposal of your old product will help
prevent potential negative consequences for
the environment and human health.
– Press and hold PHOTO andTUNER at the
same time and press and hold RESET with
a ballpoint or other thin sticks.
Besides restoring settings, master reset
deletes all preset radio stations, photos, and
voice memos.
You can use master reset to delete
everything easily.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup - Clock
In clock mode, you can set clock time, alarm
time, auto dim, and slideshow, make the set
automatically scan FM stations, and view
memory status in the setup menu.
Setting date
1
Press DOWN to highlight Set Date.
➜ The set enters date setup mode.
Setting Clock
2
3
Press SELECT.
Setting time
Press DAY+, or DOWN repeatedly or hold
them until the desired day is displayed.
1
Press CLOCK.
2
3
Press SETUP to enter setup menu.
4
Press MONTH+, or DOWN repeatedly
or hold them until the desired month is
displayed.
Press SELECT.
➜ The set enters clock setup mode.
5
6
Press YEAR+ or DOWN repeatedly or
hold them until the desired year is displayed.
4
5
Press SELECT.
➜ The set enters time setup mode.
Press BACK to exit setting.
Setting 12/24 format
1
2
Press DOWN to highlight 12/24 Format.
Press HOUR+ or UP, DOWN repeatedly
or hold them until the desired hour is
displayed.
Press SELECT.
6
7
–
Press MIN+ or UP, DOWN repeatedly
or hold them until the desired minute is
displayed.
3
4
Press UP or DOWN to select 12H or 24H.
Press SELECT to save setting and exit
Press BACK to exit setting.
➜ The set returns to clock setup mode.
Helpful hints:
You can enter time setting quickly by
pressing and holding CLOCK on the set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup - Alarm
Setting Alarm
Setup-Tuner
Setting radio tuner
You can set the alarm time and select the
alarm sound between Tuner and Buzzer.
1
2
3
Press CLOCK.
Press SETUP.
1
2
Press CLOCK.
Press DOWN repeatedly to highlight Radio
Press SETUP.
Tuner.
➜ Set Alarm is highlighted.
4
5
Press SELECT.
3
4
Press SELECT.
➜ The set enters alarm setup mode.
➜ The set automatically scans FM stations
and stores up to 15 preset stations.
Press DOWN to highlight AlarmTime.
Press BACK to stop scanning.
5
6
Press SELECT.
➜ The set enters alarm setup mode.
Press HOUR+ or UP, DOWN repeatedly
or hold them until the desired hour is
displayed.
7
Press MIN+, or UP, DOWN repeatedly
or hold them until the desired minute is
displayed.
8
9
Press BACK to exit alarm time setup.
Press DOWN to highlightWake to….
10 Press SELECT.
➜ Tuner and Buzzer are displayed on the
second display.
11 Press UP or DOWN repeatedly or hold
them to select the desired alarm sound.
12 Press SELECT to save setting and exit.
Helpful hints:
–
You can enter alarm setting quickly by
pressing and holding ALARM on the set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup-Slideshow
Setting Slideshow
Setup - Auto Brightness
Setting Auto Brightness
You can toggle slideshow on or off, and set
the frequency of slideshow.
The set can automatically dim at the start
time and light up at the end time.
1
2
Press UP or DOWN repeatedly to highlight
Slideshow.
1
2
3
Press CLOCK.
Press SETUP.
Press DOWN repeatedly to highlight Auto
Brightness.
Press SELECT.
➜ The set enters slideshow setup mode.
➜On/Off is highlighted.
4
Press SELECT.
3
4
Press SELECT.
➜ On, Off are displayed on the second
display.
5
6
Press SELECT.
Press UP or DOWN repeatedly to switch
Auto Brightness function on or off.
Press UP or DOWN repeatedly to switch
7
8
Press BACK to return.
slideshow on or off.
Press DOWN repeatedly to highlight
Timer Settings.
5
6
Press BACK to return.
Press DOWN to highlight Frequency.
9
Press SELECT.
7
8
Press SELECT.
10 Press or hold HOUR+ below the second
display or DOWN to select the desired
start time.
Press UP or DOWN to switch between
the following intervals:
5 sec->30 sec->1 min->10 min->30 min.
11 Press or hold HOUR+ below the second
display or DOWN to select the desired end
time.
9
Press BACK to exit setting.
12 Press BACK to exit setting.
Helpful hints:
–
You can set the timer to start at night
and end in the morning so that AJL305
automatically dims at night and lights up in
the morning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup-Clock Display/Viewing Memory Status
Clock/Alarm
Setup-Clock Display
Displaying clock
You can set whether to display clock or not
in photo mode.
1
1
Press CLOCK.
1
2
3
Press CLOCK.
Press SETUP.
Press UP or DOWN repeatedly to highlight
Clock Display.
To activate or deactivate alarm
Press ALARM repeatedly.
4
5
Press SELECT.
➜
➜
is displayed when alarm is activated.
disappears when alarm is deactivated.
Press UP or DOWN to select ON or
OFF.
Repeating alarm
6
Press SELECT to save setting and exit.
You can repeat the alarm call at 9-minute
intervals.
Viewing Memory Status
During the alarm call, press REPEAT
ALARM / BRIGHTNESS CONTROL.
You can check the occupied memory and
how much capacity is left.
➜
flashes.
1
2
3
Press CLOCK.
Helpful hints:
During alarm call, if no button is pressed,
alarm call will last 30 minutes.
Press SETUP.
–
–
Press DOWN repeatedly to highlight
Memory Status.
➜ The memory occupation status of photo
and voice memo is displayed respectively.
Note:
For instructions on setting the clock and
alarm, please refer to chapter Setup - Clock
and Setup - Alarm.
4
5
Press UP to enter other settings.
Press BACK to exit setting.
Helpful hints:
–
During setting the set, if no button is pressed
within 10 seconds, the set returns to SETUP
mode automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Tuning to radio station
To listen to a preset or preset
station
1
2
Press TUNER to switch on radio (FM only).
•
•
Press PRESET+ or PRESET- once or more
until the desired preset station is displayed.
Press and hold
then release.
➜ The radio automatically tunes to a station
,
for about 2 seconds,
To pause radio
PressTUNER.
➜ OFF is displayed.
of sufficient reception.
Helpful hints:
3
Repeat step 2 if necessary until you find the
desired station.
To improve FM reception:
Extend and adjust the pigtail for optimum
reception.
–
•
To tune to a weak station, press
,
briefly and repeatedly until you have found
optimal reception.
Manual programming radio
stations
You can store up to a total of 15 FM radio
stations in the memory manually.
1
Press MANUALTUNE.
2
3
Tune to your desired station (See “Tuning
to radio station”).
Press PRESET+ or PRESET- once or
more to allocate a number from 1 to 15.
4
5
Press SAVE to confirm.
Repeat step 2-4 to store other stations.
Note:
–
You can erase a preset station by storing
another frequency in its place.
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo
Voice Memo
Helpful hints:
Manual browsing
1
2
Each message can last up to 20 seconds.
To browse all photos in albums
Press the button below a certain person’s
album.
After you finish recording, the set switches
to PHOTO mode automatically.
•
3
is displayed in the photo and indicates
the number of messages left to the user.
Slide show
Playing and deleting messages
The set can display all photos automatically
at a set frequency.
To listen to a message
1
1
Press the button below the photo with
➜ Playback starts automatically from the
first message.
.
1
2
Switch slide show on.
Set a desired time interval between slides.
For slide show setting, please refer to
chapter Setup - Slideshow.
To listen to a message again
Press UP or DOWN to move the cursor
to the desired message.
Recording messages
1
2
Press PHOTO or REC.
➜ Photos are displayed.
2
Press REPLAY.
To delete a message
Press SELECT button below one to five
displays to select or deselect users to whom
you want to leave a message.
1
2
Press UP or DOWN to move the cursor
to the desired message.
Press DELETE.
3
4
Press OK to confirm.
3
4
Press REC again.
➜ Recording begins.
Speak near the MIC.
Press BACK to return.
5
Press REC to end recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness Adjustment
Connecting to PC/Sleep timer
You can manually adjust LCD brightness or
let the set adjust brightness automatically.
You can load photos, restore lost photos
into albums by connecting it to the PC.
Besides, you can synchronize time and auto
dim setting on the PC with the set.
Manually adjustment
For details, please refer to the supplied
Quick Start Guide.
•
Press REPEAT ALARM / BRIGHTNESS
CONTROL once or more to cycle screen
brightness through 3 levels.
Sleep timer
Automatically adjustment
The clock radio has a built-in sleep timer,
which enables the set to automatically turn
off radio after a set period of time.
To avoid strong light emitting from the unit
at night time, the auto dim function can be
used to adjust the brightness to the lowest
level automatically. (See Setting Auto
Brightness in chapter SETUP)
When auto dim is set, during auto dim
time span, the LCD brightness will be auto
adjusted to the lowest level. Press any button
to increase the brightness and it will last 10
seconds
1
Press SLEEP in clock mode.
2
Press CHANGE repeatedly to switch the
timer between: 15 min->30 min->60 min->90
min->120 min->OFF.
•
•
To turn off sleep timer,
Set the timer to OFF.
•
When auto brightness timer reaches the
end time, the LCD brightness automatically
changes to the brightness level before the
Auto BrightnessTimer is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and maintenance
•
If you do not intend to use the clock radio
for a long time, withdraw the power cord
from the wall outlet.
•
The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
•
•
Place the set on a hard and flat surface so
that the system does not tilt.
•
•
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Do not cover the set.Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.
•
•
•
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
•
•
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
The apparatus shall not be exposed to
dripping or splashing
Do not expose the set, batteries, to humidity,
rain, sand or excessive heat caused by
heating equipment or direct sunlight.
To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
•
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TUNER
Tuning Range.........................................................................................................................FM 87.5-108 MHz
Signal-to-Noise Ratio................................................................................................................................ 55 dB
MAIN UNIT
Power Supply Rating ...................................................................................................................100-240V AC
Power Consumption................................................................................................................................ < 6W
Weight...........................................................................................................................................................320 g
Dimensions (w × d × h).................................................................................................244 x 70 x 51.5 mm
Packaging Dimensions (w × d × h)...............................................................................256 x 143 x 91 mm
Gross weight................................................................................................................................................730 g
SPEAKERS
Impedance ................................................................................................................................................8 Ohm
Specifications subject to change without prior notice
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service
center.
: Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
WARNING
invalidate the warranty.
No sound.
Synchronization is interrupted and the set
fails.
–
•
Volume not adjusted.
Adjust theVOL.
–
•
The software of this set is corrupted.
Connect the set to your PC and synchronize
the set again by using AJL305 Photo Manager.
Occasional crackling sound during FM
broadcast.
The screen brightness keeps turning dark.
–
•
Weak signal.
Extend the pigtail antenna fully.
–
•
The set is in auto dim timing.
To let the screen keep bright, turn off auto
dim timer.
The alarm does not function.
–
•
–
•
Alarm time is not set.
See section on Setting and activating alarm.
Alarm is not activated.
See section on Setting and activating alarm.
Download from Www.Somanuals.com. All Manuals Search And Download.
|