Register your product and get support at
CED370
EN
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
c
1
2
3
4
5
6
7
8
9
0
!
"
§
Download from Www.Somanuals.com. All Manuals Search And Download.
2
a
m
5m
183 mm
53.5mm
b
c
Download from Www.Somanuals.com. All Manuals Search And Download.
d
e
f
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3 Remove the two transport screws on the
b
top of the unit.
4 Remove the mounting sleeve with the
c
Install the car audio
removal keys.
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
5 Install the sleeve into the dashboard and
d
bend the tabs outward to fix the sleeve.
6 Place the rubber cushion over the end of
e
the bolt.
7 Slide the unit into the dashboard until a
f
click sound is heard.
1
Connect wires
8 Reconnect the negative terminal of the car
battery.
1 Pull out the ISO connectors from the car
dashboard and connect them to the bigger
a
end of the supplied standard connector.
2 Connect the other end of supplied
Turn on
b
standard connector to the unit.
1 Press to turn on the unit.
c
•
If necessary, connect the following:
»
The available OSD (On-Screen Display)
languages display.
Connector
Blue cable
Connect to/with
Sub woofer out
1
2
Green/white
wire
Parking (see ‘Connect
parking brake wire’ on
page 16) switch (see
‘Connect parking brake
wire’)
3
4
5
6
7
8
9
White cable
Red cable
Left front line out
Right front line out
Left rear line out
Right rear line out
Camera
White cable
Red cable
2 Touch a language to select.
The OSD language changes to the
selected language immediately.
Pink wire
»
Yellow cable
Yellow cable
Camera in
Video in
•
To turn off the unit, press and hold for
more than 2 seconds.
10 Yellow cable
11 Yellow cable
12 White cable
13 Red cable
Video out 2
Video out 1
Left audio in
Right audio in
Set clock
1 Touch to display main menu.
2 Touch [Setting] to display setting menu.
3 Touch [Time].
2
Mount in the dashboard
1 If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car attery.
4 Touch [Clock Mode] to switch between
clock mode options.
2 Ensure that car dashboard opening is within
5 Touch [Set Time].
a
these measurements:
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Touch
/
to adjust each setting.
Remove the USB device
7 Touch to exit time setting menu.
1 Press to turn off the unit.
2 Remove the USB device.
Listen to Radio
5
Insert SDHC card
1 Touch to display main menu.
2 Touch [Radio].
1 Press to open the front panel.
2 Insert the SDHC card into the card slot.
»
The unit starts playing from the SDHC
card automatically.
Remove the SDHC card
1 Press to turn off the unit.
2 Press the card until you hear a click sound.
3 Touch [FM] repeatedly at the right-lower
»
The card is now disengaged.
corner to switch among the band options.
3 Remove the card.
4 Touch / to tune to a radio station
manually.
•
To tune to a radio station automatically,
touch and hold / more than 1 second.
Play with Bluetooth device
Pair the Bluetooth-enabled devices
3
Play disc
The first time you connect your Buetooth device
to the unit, you need to pair the device to the
unit. Pairing needs only to be done once.You can
pair up to eight devices.
You can play video, audio or images stored on the
following discs:
•
•
•
DVD video, DVD-R, DVD-RW
VCD
1 Turn on the Bluetooth function on your
device.
Audio CD, CD-R, CD-RW
2 Search for Bluetooth device with your
1 Press to open the front panel.
device.
2 Insert the disc into the disc slot with label
3 Select “CED370” in the pairing list.
4 Enter default password “0000”.
side facing up.
3 Close the front panel.
•
To remove the disc, press the button.
Make a call
1 Pair the phone with the unit.
4
Play USB device
2 Touch > [Media] > [BT] to access phone
call menu.
1 Slide the USB socket cover to the left.
2 Insert the USB device into the USB socket.
3 Touch
/
to navigate through the options
under this menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Touch on an option to access all the calls or
numbers under this option.
5 Touch on a call.
•
Or touch to enter number directly, then
touch green
to dial.
Receive call
By default, all incoming calls are received
automatically.
1 If there is incoming call, [Incoming call...]
flashes on the screen. Speak into the
Bluetooth microphone.
2 When conversation ends, touch
(red)
to terminate the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CED370_00_QSG_V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|