Register your product and get support at
CED780
EN
User manual
3
ES-AR Manual del usuario 41
PT-BR Manual do Usuário 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
7 Play with Bluetooth device
Adjust microphone position
Pair the Bluetooth-enabled devices
Make a call
25
25
25
27
27
28
28
28
1 Important
Safety
5
5
5
Notice
Receive call
Bluetooth phone book settings
Favorite call
Adjust Bluetooth settings
Listen to music from Bluetooth device 29
2 Your in-car entertainment system
Introduction
7
7
8
9
10
What's in the box
Overview of the main unit
Overview of the remote control
8 Play iPod
29
29
30
30
30
3 Get started
12
12
15
16
16
17
17
Compatible iPod/iPhone/iPad
Listen to the iPod/iPhone/iPad
Search for a track
Install the car audio
Mount into the dashboard
Attach the front panel
Install remote control battery
Turn on
Charge the iPod/iPhone/iPad
9 Adjust sound
Adjust volume
31
31
31
31
31
32
32
32
32
Set date and time
Mute
4 Play audio/video/picture
Load discs
18
18
19
19
20
20
20
21
21
21
21
22
22
22
Select preset equalizer
Adjust fader/balance/subwoofer
Switch music listening zone
Turn FullSound on/off
Turn MAX sound on/off
Turn DBB on/off
Connect USB device
Insert SD/MMC card
Play/Pause
Browse
Skip to a chapter/title/time
Select audio track
Select subtitle language
Change view angle
Repeat one/all chapter
Random play
10 Adjust settings
33
33
33
33
34
34
Display system setup menu
Adjust general settings
View Info settings
Adjust Navigation settings
Adjust Bluetooth settings
Select audio mode
View photo
11 Others
35
35
35
35
35
36
36
37
5 Listen to radio
23
23
23
24
Adjust brightness
Set rear view camera
Adjust display design
Listen to other devices
Detach the front panel
Reset
Tune to a radio station
Store radio stations in memory
Tune to a preset station
6 Use navigation system
Insert map card
24
24
24
Replace fuse
Use map
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Product information
37
38
USB playability information
13 Troubleshooting
39
39
About the Bluetooth device
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
1 Important
Safety
Notice
•
Read and understand all instructions
before you use the device. If damage is
caused by failure to follow instructions, the
warranty does not apply.
•
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
The device is designed for negative ground
(earth) 12V DC operation only.
To reduce the risk of traffic accidents, do
not watch video when driving.
To ensure safe driving, adjust the volume to
a safe and comfortable level.
Improper fuses can cause damage or
fire.When you need to change the fuse,
consult a professional.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
•
•
•
•
•
•
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuits, do not expose the
device, remote control or remote control
batteries to rain or water.
The device shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
•
•
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
•
•
•
•
Never insert objects into the ventilation
slots or other openings on the device.
Never place any objects other than discs
into the disc tray/slot.
To avoid exposure to laser radiation, do
not disassemble the device.
Risk of damage to the screen! Never touch,
push, rub or strike the screen with any
object.
Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
•
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
ABOUT DIVXVIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation.This is an official DivX
Certified® device that plays DivX video.Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVXVIDEO-ON-DEMAND:This
DivX Certified® device must be registered
in order to play purchased DivXVideo-on-
Demand (VOD) movies.To obtain your
registration code, locate the DivXVOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
This apparatus includes this label:
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
This product complies with the radio
interference requirements of the European
Community.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of your old product and
batteries
2 Your in-car
entertainment
system
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
additional information on a recycling center in
your area.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2014 © WOOX Innovations Limited.All rights
reserved.
Introduction
With the car entertainment system, you can
•
Quickly found routine through the
navigation system
And you can also enjoy:
•
Audio/video/JPEG pictures from
•
•
•
•
•
DVD,VCD or CD
USB devices
SD/SDHC/MMC cards
iPod/iPhone
External devices
•
•
FM or AM (MW) radio
Audio from Bluetooth-enabled devices
Besides, you can make/receive phone calls with
Bluetooth-enabled devices.
Specifications are subject to change without
notice.WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
f Audio andVideo cable
What's in the box
g Hexagon head screw
Check and identify the contents of your
package:
h Screws
- M4x8mm (x4)
i Remote control battery
j Rubber cushion
k User manual
a
b
l Quick start guide
c
e
d
f
g
j
h
k
i
l
a Main unit and front panel (with a sleeve)
b Remote control
c Trim plate
d Carrying case for front panel
e ISO standard connector
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
a b
c
d
e
f
g
h
i
j
k
o
n
m
l
q
p
a OPEN
e +/-PRESET
•
Open/CloseTFT screen.
•
Select preset radio station.
•
Search for track/folder.
b
c
•
•
Press to answer or redial a call.
Press and hold to transfer call.
f DISP
•
•
Adjust dimmer settings.
Press and hold to turn off display.
/
•
•
•
•
Turn the unit on or off.
Confirm selection.
Mute or unmute sound.
Rotate to adjust volume.
g
h
TILT
•
•
Adjust position of the screen.
Eject disc.
d BAND
Select tuner band.
i NAVI
Enter GPS navigation system or exit.
•
•
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
j AV IN
Overview of the remote
control
•
•
•
External audio/video socket.
k
l
Unlock the panel.
a
b
c
d
USB socket.
m SOURCE
e
f
•
Select source.
~
}
|
{
n
o
•
Press to terminate call.
g
h
i
/
z
y
•
•
•
Tune for radio station.
Skip/search for track.
Fast backward/forward playback.
j
k
l
x
w
v
p RESET
m
n
•
Reset the unit when it hangs up.
u
t
s
o
p
q SD/SDHC/MMC card slot
q
r
a
•
Turn the unit on or off.
b NAVI
•
Enter GPS navigation system or exit.
c SOURCE
•
•
Select source.
Mute or unmute sound.
d
e BAND
•
Select tuner band.
f VOLUME +/-
•
Adjust volume.
g SUBTITLE
•
Select DVD or DivX subtitle language.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
h
x
y
/
•
Turn maximizing sound on or off.
•
•
Skip to previous/next track/chapter.
Move cursor to left/right.
i DVD MENU
•
•
•
Access DVD main menu.
•
View the clock.
j
k
Turn full sound on or off.
z DVD AUDIO
•
Select audio language or audio channel.
Return to previous menu or exit.
{ TOP MENU
•
Return to top menu.
l DBB
•
Turn Dynamic Bass Boost (DBB) sound
| TILT +/-
on or off.
•
Adjust position of the screen.
m EQ
}
•
Access audio setting menu.
•
Unlock the panel.
n
~ DISP
•
Turn the screen blackout mode on or
off.
•
Adjust dimmer settings.
•
Press and hold to turn off display.
o ZONE
•
Switch music listening zone.
p
q
•
Select video channel.
•
•
Answer phone.
Dial or redial number.
r
s
t
u
•
•
•
Terminate call.
Browse photos.
Switch to music playing mode.
/
•
•
•
Skip to previous/next preset station.
Skip to previous/next folder.
Search backward/forward for DVD
video.
•
•
Move cursor up/down.
v
Start play or pause.
w OK
•
Confirm selection.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on speaker connection
3 Get started
•
Never connect speaker wires to the metal
body or chassis of the car.
•
Never connect speaker wires with stripes
to one another.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Connect wires
Caution
Always follow the instructions in this chapter in
sequence.
• Ensure that all loose leads are insulated with electrical
tape.
1 Check the car's wiring carefully, then
Install the car audio
connect them to the supplied ISO wires.
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
• This unit is designed for negative ground (earth) 12V
DC operation only.
• Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
• To avoid short-circuit: before you connect, ensure that
the ignition is off.
• Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
• Ensure that all loose leads are insulated with electrical
tape.
• Ensure that the leads do not get caught under screws
or in moving parts (e.g. seat rail).
Connector
Connect to
1
2
Yellow wire The +12V car battery
which is live at all times.
Blue/White The electric antenna control
• Ensure that all ground (earth) leads are connected to a
common ground (earth) point.
wire
lead or power supply lead
of the antenna booster. If
there is no electric antenna
or antenna booster, or
it is manually operated
telescopic antenna, it is
unnecessary to connect
this lead.
• Use only the supplied mounting hardware for a safe
and secure installation.
• Improper fuses can cause damage or fire.When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
•
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector
Connect to
Note
3
4
Black wire
A metal surface of the car.
Connect the black ground
(earth) lead before connect
the yellow and red power
supply leads.
• The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
• If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown onTFT:
Red wire
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch. If
there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Ensure
that black ground (earth)
lead is connected to a metal
surface of the car first.
5
6
7
8
Green and Left speaker (Rear)
green/black
wires
White and Left speaker (Front)
white/black
wires
Gray and
gray/black
wires
Right speaker (Front)
Purple and Right speaker (Rear)
purple/
black wires
2 Connect the other end of the supplied
standard connector to the car audio
system.
Caution
• To avoid any accident, the driver must not watch video
while driving.This unit is designed to not allow watching
moving video while driving. Park your car in a safe place
and engage the parking brake before watching moving
video.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
23
22
21
20
8
18
"
/
!
0
§$% &
9
1
2
5
7
19
6
3
4
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector/
Object
Connect to/with
Mount into the dashboard
1
2
Pink wire
2.5m
Extension wire
Parking brake (-)
Note
extension
wire (not
included)
Brake switch
Ground
• Check wire connection before you mount the unit
into a car.
• If preset radio stations are lost when the ignition key is
turned off and then turned on, reconnect the red leads
crosswise to the yellow ones.
3
4
5
Purple wire
Reverse camera
(B+)
1 If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
6
7
8
Gearbox
switch
Reverse gear Back lamp lead +
signal
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
ISO wires
Connected in step
1 above
•
If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
9
10
Yellow cable Video out
Red cable
Rear line out
(Right)
2 Ensure that car dashboard opening is
within these measurements:
11
12
13
White cable Rear line out
(Left)
Red cable
Front line out
(Right)
5mm
White cable Front line out
(Left)
14
15
16
17
18
19
20
21
Red cable
White cable Audio in (Left)
Yellow cable Video in
Audio in (Right)
183 mm
Brown cable Camera in
53mm
Blue cable
White wire
Black wire
Black wire
Subwoofer
OE remote
Radio antenna
External
microphone
TV ready/DAB
ready
•
Since the unit cannot be used if the
slant angle of dashboard opening is
above 20 degrees, ensure that the
horizontal slant of the dashboard
opening is between 0 and 20 degrees.
22
23
Black wire
Black wire
GPS smart
antenna
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
3 When installing in a shallow space, change
Note
the position of slide brackets.
• If the unit is fixed by the supplied screws instead of the
sleeve, skip this step.
Attach the front panel
1 Attach the trim plate.
4 Place the supplied rubber cushion over the
end of the mounting bolt.
2 Insert the left side of the panel in the
chassis until it is correctly engaged.
3 Press the right side of the panel until the
mechanism locks it into place.
5 Install the sleeve into the dashboard and
bend the tabs outwards to fix the sleeve.
Slide the unit into the dashboard until you
hear a click.
Install remote control battery
Caution
• Risk of explosion! Keep battery away from heat,
sunshine or fire. Never discard battery in fire.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Set date and time
• Remove battery if it is flat or if the remote control will
not to be used for a long time.
• Battery contain chemical substances. It should be
disposed of properly.
1 Tap to display main menu.
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
2 Tap to display the full menu.
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
Caution
• Risk of road accidents! Never watch videos or adjust
settings while you drive.
3 Tap
.
1 Press to turn the unit on.
» The available OSD (On-Screen
Display) languages are displayed.
» The setup menu is displayed.
2
Tap a language with fingertip.
» The OSD language is changed to the
selected language immediately.
•
To turn the unit off, press and hold
for three seconds.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Tap
.
4 Play audio/
video/picture
» The date/time setup menu is displayed.
Load discs
You can play video, audio or images stored on
the following discs:
•
•
•
DVD video, DVD-R, DVD-RW
VCD
Audio CD, CD-R, CD-RW
5 Tap on [Date], [Clock Mode] or [Time].
6 Tap or to set date/time.
1 Insert the disc into the disc slot with label
7 When date/time is set, tap to return to
side facing up.
main menu.
» The disc starts playing automatically.
2 To remove the disc, press the button.
» When the disc is ejected, the unit
switches to the previous source,
if connected. Otherwise, the
unit switches to [Radio] mode
automatically.
Note
• Supported region code depends on where you bought
the car audio system.
Countries where you
bought the unit
China
Supported DVD
region code
Asia Pacific,Taiwan,
Korea
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Latin America
Russia, India
Insert SD/MMC card
Note
• This device supports Secure Digital High Capacity
(SDHC) card.
Connect USB device
2 Insert the SD/MMC card into SD/MMC
Note
card slot.
» Play starts automatically.
• Ensure that the device contains playable content.
1 Push the USB socket cover upside.
2 Insert the USB device into the USB slot .
» The files play automatically.
Remove SD/MMC card
1 Switch to another source.
2 Press the card until you hear a click.
» The card is now disengaged.
3 Remove the SD or MMC card.
3 To remove the USB device, switch the car
audio system to other source first, then
take off the USB device.
» When USB device is disconnected, it
plays the previous source.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Play/Pause
1 Once a disc, USB or SD/MMC card is
inserted, play starts automatically.
•
For DVD movie, if a menu appears,
press to start play.
3 Drag along the search bar to display the
alphabet pop-up.
4
Release the finger to refresh the list.
5 Tap on the name to start play.
Skip to a chapter/title/time
2 To pause, tap
To resume play, tap again.
3 To skip forward/backward, tap
4 To fast forward/backward, tap and hold
or
.
•
1 During play, tap anywhere except for the
upper left corner to display the control bar.
or
.
2 Tap
on the left lower corner of the
screen.
» The second control bar is displayed.
.
Browse
During play from USB device or SD card, you
can browse through the listed audio/video or
picture files to select preferred file for listening
or watching.
1 Tap to return to playlist menu.
2 Tap one of the icons below to select
folder/file:
•
•
•
: to display all available audio folders/
tracks.
: to display all available picture
folders/files.
: to display all available video
folders/files.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Tap
.
Tip
» The search screen is displayed.
• You may also press SUBTITLE on the remote control
repeatedly to select subtitle language.
Change view angle
Some DVDs contain alternate scenes, such
as scenes recorded from different camera
angles. For such DVDs, you can select available
alternate scenes.
Press TILT repeatedly on the front panel.
» The view angle is changed.
4 Tap the numbers to enter track number,
then tap [OK].
•
•
To clear the previous input, tap
To clear all input, tap
.
.
Repeat one/all chapter
Select audio track
During play, you can select different repeat play
modes.
For DVD/VCD movie disc:
For video discs that contain two or more audio
tracks.
1 Tap anywhere except for the upper left
1 During play, tap anywhere except for the
corner to display the control bar.
upper left corner to display the control bar.
2 Tap
to display the second menu.
2 Tap
repeatedly to select audio track.
» The audio channel information is
3 Tap to select:
•
•
•
[Rep: chapter]: play the current
displayed on upper line of the screen.
chapter repeatedly.
[Rep: title]: play all chapters in the title
repeatedly.
Tip
[Rep: disc]: cancel repeat play.
• You can also press DVD AUDIO on the remote
control repeatedly to change audio track.
ForVCD karaoke:
Tap to select:
•
•
[Rep: one]: play the current track
repeatedly.
[Rep: disc]: cancel repeat play.
Select subtitle language
For CD/MP3/WMA audio files:
Tap on the upper line of the screen to select:
•
•
For DVD or DivX discs that contain two or
more subtitle languages.
: play the current track repeatedly.
: play all tracks in the current folder
repeatedly.
: cancel repeat play.
1 During play, tap anywhere except for the
upper left corner to display the control bar.
•
2 Tap repeatedly to select a language.
» The selected language is displayed.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Tap on a picture to view it in full screen.
Random play
You can play audio tracks/files in random order.
During play, tap
play on or off.
repeatedly to turn random
•
•
(red): start random play.
(gray): cancel random play.
Select audio mode
When you playVCDs, you can select an audio
mode (R/L/Stereo).
Tip
• You can also press
picture list.
on the remote control to view
1 During play, tap anywhere except for the
upper left corner to display the control bar.
2 Tap
repeatedly until the preferred audio
mode is selected.
Zoom
You can zoom in pictures for a close view.
View photo
1 During view pictures, tap anywhere except
for the upper left corner to display the
control bar.
1 Tap
.
» Thumbnail view of the pictures is
2 Tap repeatedly to zoom in/out the
displayed.
picture.
Rotate pictures
1 During view pictures, tap anywhere except
for the upper left corner to display the
control bar.
2 Tap repeatedly to rotate the picture.
2 Drag the bar downward to view all
pictures.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
[Local]: stations with strong and weak
signals can be broadcast.
5 Listen to radio
Tune to a radio station
1 Tap to display home menu.
2 Tap
.
» Band and frequency information is
displayed.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations manually
1 Select band.
2 Tune to the station by tapping or
.
3 Tap FM or AM to select band:
•
•
FM band options: FM1, FM2, FM3
3 Tap and hold one of the channels 1 to 6
AM band options: AM1,AM2
over two seconds.
» The station is saved under the selected
channel.
4
Briefly tap or to tune to a radio
station by step.
•
Tap or for over one second to
tune to a radio station automatically.
Store stations automatically
You can search for a station with intro search,
which broadcasts a 10-second preview of each
detected radio station.
Tip
• You can also press BAND on the front panel or
remote control repeatedly to select the band.
1 Select band.
2 Tap
.
3 Tap [Auto Store].
Select radio range
» Auto search starts.The six strongest
stations of the selected band are saved
in preset channels 1-6 automatically.
Before you start to search for radio stations,
you can select radio range.
1 Tap
.
2 Tap [Radio Range] to toggle tuner
sensitivity from normal to high sensitivity.
•
[Distance]: only stations with strong
signals can be broadcast.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Use navigation
system
Tune to a preset station
1 Select band.
2 Tap one of the preset channels (1 to 6) to
select a preset station.
Note
• The navigation function requires a special antenna
module and map card to work with but they are not
bundled nor offered in Latin America countries at this
time.
Insert map card
Note
• Navigation map card is not included in the packaging of
the car entertainment system.
1 Press OPEN to release the panel.
2 Open the card door under the screen.
3 Insert the map card into the map card slot.
GPS Card
4 Close the card door.
5 Attach the front panel.
Tip
• You can press NAVI to enter/exit the navigation system.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Play with
Bluetooth
device
Use map
Note
• You might need to upgrade the navigation map (sold
separately) before using it. See "Upgrade the map"
section.
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetooth-
enabled device.
1 Tap to display main menu.
2 Tap
.
» The navigation menu is displayed in a
few seconds.
3 Refer to the user manual of the navigation
Adjust microphone position
map to operate the navigation tool.
For better sound quality in make/receive phone
call through Bluetooth, place the microphone
near the mouth.
1 Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2 Place the microphone at a proper location.
For example,
•
Stick it onto the dashboard.
•
Or, clip it on the sun-shield.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the unit,
you need to pair the device to the unit. Pairing
needs only to be done once.
You can pair up to eight devices.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select "PH780" in the pairing list.
Note
4 Enter default password "0000".
» If the pairing succeeds, the dial screen
is displayed.
• The operational range between this unit and a
Bluetooth device is approximately 10 meters (30 feet).
• Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
• Compatibility with all Bluetooth devices is not
guaranteed.
Disconnect Bluetooth devices
• Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
• Keep this unit away from any other electronic device
that may cause interference.
1 Under dial screen/Bluetooth audio mode,
tap
.
2 Tap [Paired Device].
» The Bluetooth/Paired device screen is
displayed.
Pairing with unit
1 Tap to display home menu.
2 Tap
.
» The setting menu is displayed.
3 Tap to display Bluetooth setting menu.
4 Tap [New Pairing] to search for Bluetooth
device with your device.
5 Select the name of desired device in the
pairing list.
3 Tap on one device that you want to
6 Enter default password "0000" in your
reconnect/disconnect.
device.
•
Tap (green) to reconnect the
selected device.
» If the pairing succeeds, the phone call
record is displayed.
•
Tap (red) to disconnect the selected
device.
Tip
• If the Bluetooth device is paired, under disconnect
mode, tap on top of the screen into the Bluetooth/
paired device list.
• If there is no Bluetooth device in the paired device list,
tap
displayed, you can tap
• If you do not want to reconnect the device to the
on top of the screen, [Paired list is empty] is
to search the device.
unit automatically, under Setting menu, tap
Connect], then select [Off]. For details, see "Adjust
Bluetooth settings" section.
> [Auto
Pairing with mobile phone
1 Open your mobile phone and switch on
Bluetooth.
2 Search for other Bluetooth device with
your device.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a call
Receive call
You can make phone call with the unit under
any mode.
By default, all incoming calls are received
automatically.
Note
Note
• Ensure that the phone is connected to the unit via
Bluetooth.
• You can select to receive calls manually by set [Auto
Answer] to [Off] status. For details, refer to "Adjust
Bluetooth settings".
1 Tap on top of the screen.
1 If there is an incoming call, [Incoming
» The dial screen is displayed.
call…] is displayed on the screen.
2 Tap number icons directly to input phone
2 Tap
(green) to answer/accept the call.
number.
3 When conversation ends, tap
(red) to
•
•
•
Tap
to clear the last input.
terminate the call.
Tap to clear all input.
Tap to go back to previous screen.
Tip
3 Tap to start calling.
• You can also press
terminate the call.
/
on front panel to answer/
Switch phone call to mobile phone
If you do not want your passenger to hear your
incoming call, you can switch the call the mobile
phone.
During talking, tap
.
4 During talking, tap to display the keypad.
» The voice is transferred from the
loudspeaker to the mobile phone.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Tap to display the favorite call list.
Tip
• You can also press and hold on front panel to
transfer the call.
Bluetooth phone book
settings
The users are allowed to search and dial the
number stored in the phone book.
3 Tap on desired number to start calling.
1 Tap on top of the screen.
» The dial screen is displayed.
Adjust Bluetooth settings
2 Tap to display the phone book mode.
» Tap [Sync] to synchronize phone book.
1 In the Bluetooth menu, tap
.
» The option menu is displayed.
3 Search the number you want to dial, then
tap to start calling.
•
•
•
[New Pairing]: pair the new device.
[Paired Device]: display paired device.
[Display Design]: change the
background.
Tip
• You can enter desired name/number on the keypad to
search quickly.
2 Tap an option to change the setting.
Favorite call
You can make a favorite call from the favorite
call list.
1 Tap on top of screen.
» The dial screen is displayed.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Play iPod
Listen to music from
Bluetooth device
Compatible iPod/iPhone/iPad
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the unit. If the device also supports
AudioVideo Remote Control Profile (AVRCP)
profile, you can use the control on the unit or
its remote control to play music stored on the
device.
The car audio system supports below iPod/
iPhone/iPad models:
Made for.
•
•
•
•
•
•
•
•
•
•
•
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
1 Pair the phone with the unit.
2 Tap to return to home menu.
3 Tap
.
4 The Bluetooth menu is displayed.
•
•
•
Tap : switch to music mode.
Tap : switch to dial screen mode.
Tap : switch to phone book.
Works with.
•
•
•
•
•
•
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPad 2
iPad
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Listen to the iPod/iPhone/
iPad
Search for a track
During play from iPod/iPhone/iPad, you can
search through the music/video files to select
preferred file for listening/watching.
1 During playing, tap
.
» Search list is displayed.
2 Tap one of the icons below to select
1 Connect your iPod/iPhone/iPad to the
front USB socket via Apple's own 30pin
USB cable.
folder/file:
•
•
: to search a song.
: to search a video.
» Music playback starts.
3 Tap on the screen to select desired song/
movie.
4 Tap on the selected song/movie to play.
Charge the iPod/iPhone/iPad
When the iPod/iPhone/iPad is connected to the
car audio system, the iPod/iPhone/iPad begins
to charge.
2 To pause/resume play, tap
3 To skip a track, tap
4 To fast backward/forward, tap and hold
.
Tip
/
.
• For certain iPod models, it may take up to one minute
before the charging indication is displayed.
/
.
5 Tap repeatedly to toggle between two
control modes:
•
iPod control mode: use buttons/touch
screen on iPod/iPhone/iPad to control
the music.
•
Unit control mode: tap screen on car
audio to control the music.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adjust EQ settings by tapping on the
9 Adjust sound
screen.
•
•
•
•
[Bass] bass range: -14 to +14.
[Middle] middle range: -14 to +14.
[Treble] treble range: -14 to +14.
[LPF] low pass filter range: 60, 80, 100,
160.
Adjust volume
•
•
[MPF] middle pass filter range: 0.5KHz,
1.0KHz, 1.5KHz, 2.5KHz.
[HPF] high pass filter range: 10.0KHz,
12.5KHz, 15.0KHz, 17.5KHz.
Rotate clockwise/counterclockwise to
increase/decrease the volume.
4
If you are not satisfied with the adjusted
sound settings, tap to restore default
settings.
Mute
5 Tap to exit.
You can turn off the sound of your audio.
During play, press
/
on front panel.
•
To resume sound, press
panel again.
/
on front
Adjust fader/balance/
subwoofer
Select preset equalizer
You can adjust the sound balance between
the front, rear, left, and right speakers and
subwoofer.
1 Tap
.
» The current equalizer setting is
1 Tap on upper line of the screen to
displayed.
display setting menu.
2 Tap
.
2 Tap or to select a preset EQ:
•
•
•
•
•
•
•
•
[Custom]
[Techno]
[Rock]
3 Tap or to adjust fader/balance value.
•
[Fader] fader range: +16 to -16. (F =
front speaker, R = rear speaker)
[Classic]
[Jazz]
[Optimal]
[Flat]
•
[Balance] balance range: -16 to +16. (L
= left speaker, R = right speaker)
[Pop]
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Tap
.
4 Tap on the screen to adjust music listening
» The subwoofer setting is displayed.
zone setting.
Turn FullSound on/off
Philips FullSound restores the audio details that
is lost in music compression. It enriches the
music signal, so what you hear is the full sound
with every nuance of emotion and every detail
of musical genius. Philips FullSound can:
•
•
Bring CD listening experience to MP3
Achieve fuller bass with greater depth and
impact
Restore sense of spaciousness that is
lacking in compressed audio
•
•
•
[Subwoofer]: tap [On]/[Off] on screen
to turn the subwoofer on or off.
•
•
Tap or
to select subwoofer
volume: 0 to 14.
[LPF]: tap screen to select subwoofer
low pass filter range: 80, 120, 160.
Enhance sound precision and detail
During play, tap
screen.
•
•
on the upper line of the
5 Tap to exit.
(red): FullSound is activated.
(gray): FullSound is deactivated.
Switch music listening zone
Turn MAX sound on/off
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create.You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
During play, tap on the upper line of screen.
•
(red): turn maximizing sound (MAX
sound) on.
(gray): turn maximizing sound (MAX
sound) off.
•
1 Tap on the upper line of the screen to
display setting menu .
Turn DBB on/off
2 Tap
twice.
3 The music zone setting is displayed.
When DBB (Dynamic Bass Boost) is activated,
low tones will be enhanced electronically.
Tap
on the upper line of screen to toggle
between the settings.
•
•
(red): DBB (Dynamic Bass Boost)
function is activated.
(gray): DBB (Dynamic Bass Boost)
function is deactivated.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General
settings
[Radio
Options
[On]
Description
10 Adjust settings
Select one
that matches
your location.
Turn the
Region]
[Beep]
Display system setup menu
beep sound
on. Each time
you press a
button, the
unit beeps.
Turn off the
beep sound.
Select OSD
(on screen
display)
1 Tap
>
to display the full menu.
[Off]
[Language]
language.
[Calibration]
Calibrate the
touch screen.
[Clock
Mode]
[Date]
[Time]
[12Hr]/[24Hr] Select time
format.
2 Tap
.
» The settings menu is displayed.
Set date.
Set time.
Adjust general settings
4 Tap to exit.
1 Tap
.
View Info settings
1 Tap
.
2 Drag the bar downward to view all
settings.
3
Swipe your finger on screen repeatedly to
select an option.
» The setting is changed.
2 Drag the bar downward to view all
detailed information of the system.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust Navigation settings
Adjust Bluetooth settings
1 Tap
.
1 Tap
.
2
Swipe your finger on screen repeatedly to
select an option.
2 Tap on a setting repeatedly to change
setting.
» The setting is changed.
Bluetooth Options Description
settings
Navigation
settings
Options Description
[New
Pair new device.
Pairing]
[Navigation] [On]
Turn the navigation
on.
[Auto
Connect]
[On]
If the pre-paired
device is within
[Off]
Turn the navigation
off.
effective range, the
system reconnects
to pre-paired device
automatically.
[Navigation
Program
Path]
Access the
Navigation Program
Path mode.
[Off]
[On]
[Off]
Need to reconnect
manually.
Answer paired phone
call automatically.
Answer phone call
manually.
[Navigation
Voice]
[On]
[Off]
Turn the navigation
voice on.
Turn the navigation
voice off.
[Auto
Answer]
3 Tap to exit.
[Pin
Code]
Set code for pairing
the car entertainment
system with other
Bluetooth devices.The
default code is 0000.
View the name of
paired device.
[Device
Name]
3 Tap to exit.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Others
Adjust display design
You can change the background screen on the
playback mode.
1 In any mode, tap
.
Adjust brightness
» The option menu is displayed.
2 Tap [Display Design] to set the options.
1 Press DISP on front panel repeatedly to
adjust the dimmer settings.
2 Press and hold DISP to turn off the display,
press again or tap onTFT screen to switch
on.
Tip
• While playing DVD/Video or picture, you can also
tap on
/
on screen to adjust screen brightness/
contrast.
•
•
•
•
[Wallpaper]: tap to change wallpaper
on screen.
[Visualizer]: tap to change visualizer on
screen.
[Screen]: tap to change OSD display
color.
[Key Color]: tap to change OSD main
unit button illumination color.
Set rear view camera
If you connected a rear view camera, you can
see from the screen of the car audio system
what the camera takes when the back lamp
lights up.
3 Tap to exit.
1 Tap
.
.
2 Tap
Listen to other devices
» Picture from rear camera is displayed.
You can connect an external audio/video device
to the car audio system.
1 Connect the car audio to the device with
the supplied AV cable.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
AV IN
2 Tap to display home menu.
3 Tap [AV-IN1].
4 Operate the connected the device (see
instruction manual of the device).
Tip
3 Pull the panel towards you to disengage it
• If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.
from the chassis.
4 Store the panel in the supplied carrying
case to protect it from dirt or damage.
Reset
Detach the front panel
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar
tool.
You can detach the front panel to deter theft.
1 Press OPEN to release the panel.
2 Push the right side of the panel leftward.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
12 Product
information
• When the unit is reset, all the settings remain
unchanged.
Note
Replace fuse
• Product information is subject to change without prior
notice.
If there is no power, the fuse may be damaged
and need to be replaced.
1 Take out the unit from dashboard.
General
Power supply
2 Check the electric connection.
12V DC (11V - 16V),
negative ground
15 A
3 Buy a fuse that matches the voltage of the
damaged fuse (15A).
Fuse
4 Replace the fuse.
Suitable speaker
impedance
Maximum power
output
4 - 8
50 W x 4 channels
Continuous power
output
Pre-Amp output
voltage
24 W x 4 channels
(4 10%T.H.D.)
2.0V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
15A
15A
Subwoofer output
voltage
2.0V (CD play mode,
61 Hz, 0 dB, 10 k
load)
Aux-in level
500 mV
Dimensions (W x H
x D)
178 x 50 x 210 mm
Weight (main unit)
3.1 kg
Disc player
Tip
System
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
• If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this
case, consult your Philips dealer.
Frequency response
Signal/noise ratio
Total harmonic
distortion
Less than 1%
Channel separation
Video signal format
Video output
>55dB
NTSC only
1 +/- 0.2V
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
USB playability information
Frequency range - FM 87.5 - 108.0 MHz
(50kHz per step)
Compatible USB devices:
•
•
•
USB flash memory (USB 2.0 or USB1.1)
USB flash players (USB 2.0 or USB1.1)
Memory cards (SD / MMC / SDHC)
Frequency range -
AM(MW)
Usable sensitivity - FM 5 uV
Usable sensitivity - AM 25 uV
(MW)
522 - 1620 KHz
(9kHz per step)
Supported USB formats:
•
•
USB or memory file format: FAT16, FAT32
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
LCD
Screen size
Display resolution
Contrast ratio
Brightness
•
•
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
7.0 inches
800 x 480 dots
500
•
•
•
•
450 cd/m2
Bluetooth
Communication Bluetooth Standard version
system
Output
Supported MP3 disc format:
•
•
ISO9660, Joliet
Maximum title number: 512 (depending on
file name length)
2.0
Bluetooth Standard Power
Class 2
Line of sight approx. 8m
•
•
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Maximum
communication
range
Frequency band 2.4 GHz band (2.4000 GHz
- 2.4835 GHz)
Compatible
Bluetooth
profiles
•
Supported Bit-rates: 32-320 Kbps and
variable bit rate
Supported video formats:
Hands-Free Profile (HFP)
Handset Profile (HSP)
Advanced Audio
•
•
DVD
Divx
Distribution Profile (A2DP)
AudioVideo Remote
Control Profile (AVRCP)
Note
• To ensure a better playback, it is recommended that file
image size is no higher than 640 x 480, frame rate is 20
fps, data rate is no higher than 500 kbps.
Supported
codecs
Receive
Transmit
SBC (Sub Band Codec)
SBC (Sub Band Codec)
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Disc region code is not compatible with
the unit. Use disc with proper region code.
13 Troubleshooting
Can’t play DivX file from SD or USB
•
This device doesn’t support DivX playback
in SD or USB mode.
Warning
• Never remove the casing of this device.
No image
Parking wire connection is incorrect. Check
the wiring.
•
To keep the warranty valid, never try to repair
the system yourself.
No image on rear display
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
•
Check if you are playing DivX video. If
yes, it’s normal, for this device does not
support video out in DivX playing mode.
(www.philips.com/welcome).When you contact
Philips, ensure that the device is nearby and the
model number and serial number are available.
Image flashes or distorted
•
Video DVD settings do not match with the
DVD.Adjust video DVD settings.
Video connection is improper. Check the
connections.
•
No power
•
Car engine has not been started. Start the
car engine.
Noise in broadcasts.
•
•
Connections are incorrect.
Fuse has been damaged. Replace fuse.
•
Signals are too weak. Select other stations
with stronger signals.
•
•
Check the connection of the car antenna.
Change broadcast from stereo to mono.
No sound
•
•
Volume is too low.Adjust volume.
Speaker connections are incorrect.
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
No response to the remote control
•
•
•
•
•
Ensure that the path between the remote
control and the unit is clear from obstacles.
From a close distance, point the remote
control directly at the unit.
Switch F/R to correct position (F for front
control and R for rear control).
The function does not work. See the
instruction manual.
Replace the remote control battery.
Fuse is broken
•
The fuse type is incorrect. Replace it with
a 15A fuse.
Speaker wire or power wire is grounded.
Check the connections.
•
Display show ERR-12
•
USB/SD/MMC data error. Check the USB
device or SD/MMC card.
Disc does not play
•
Disc is upside down. Ensure that the
printed side is upwards.
•
Disc is dirty. Clean the disc with a clean,
soft, lint-free cloth.Wipe the disc outwards
from the center.
About the Bluetooth device
•
•
•
Disc is defective.Try another disc.
incompatible disc is used.Try another disc.
Disc rating exceeds the restriction setting.
Change the rating settings to lower one.
Music playback is unavailable on the system
even after successful Bluetooth connection.
•
The device cannot be used with the
system to play music.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
•
The device does not support the profiles
required for the system.
•
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•
•
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
•
•
•
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls.This does not indicate any
malfunction of the system.
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
2014 © WOOX Innovations Limited.All rights reserved.
This product was brought to the market byWOOX Innovations Limited or one of its affiliates, further
referred to in this document asWOOX Innovations, and is the manufacturer of the product.WOOX
Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and
the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.”
CED780_55_V3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|
