Audio CD Recorder
CDR770/771
Instructions for use
Mode d'emploi
•
•
•
•
•
•
•
•
•
•
•
•
Instrucciones de manejo
Bedienungsanleitung
Gebruiksaanwijzing
Istruzioni per l'uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
OPEN / CLOSE
REC
PLAY
/
P
AUSE
STOP
RECORD
TYPE
FINALIZE
ERASE
SOURCE
DISPLA
Y
PROGRAM
PROGRAM
SCROLL
SCROLL
STORE/
STORE/
EASY JOG
EASY JOG
CANCEL/
DELETE
MENU
MENU
REM
RECORD
TIME
6
TRACK
TEXT
LEVEL
TOTAL
REM
16
TRACK
TIME
STEP
1
2
3
4
5
7
8
9
10
11
1
2
13
14
1
5
17
1
8
19
20
SYNC
MANUAL
SHUFFLE
REPEA
T
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
PROGRAM
SHUFFLE
REPEAT
DIGITAL
OPTICAL
CD
RW
1
1
ALL
ANALOG
SCAN
TRACK
ENTER
INFRA RED
ON / OFF
PHONES
CDR77X AUDIO CD RECORDER
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
English ....................................................5
Français.................................................29
Español .................................................53
Deutsch.................................................77
Nederlands .........................................101
Italiano................................................125
Svenska...............................................149
Dansk..................................................173
Suomi..................................................197
Português............................................221
ŒÏÏËÓÈο .........................................245
Polski...................................................269
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Table of contents
GENERAL INFORMATION AND DISCS
Welcome ......................................................................8
About this manual........................................................8
Technical data ..............................................................8
Discs for recording.......................................................9
Discs for playback........................................................9
Maintenance ................................................................9
Accessories .................................................................9
CONTROLS AND CONNECTIONS
Controls on the front..................................................10
Connections at the back ............................................10
DISPLAY
DISPLAY indications...................................................11
DISPLAY messages ....................................................11
MENU messages........................................................12
INSTALLATION
Connections general ..................................................13
Analog connections ..................................................13
Digital coaxial connections .......................................14
Digital optical connections .......................................14
Power supply..............................................................15
Setup recommendations............................................15
Inserting batteries in the remote control ..................15
REMOTE CONTROL
Remote control commands ........................................16
Inserting discs............................................................16
RECORDING
Remarks about recording...........................................17
Recording modes........................................................17
Autostart recording....................................................18
Manual recording.......................................................19
Finalizing CDR & CDRW discs ...................................20
Unfinalizing CDRW discs ...........................................20
Erasing CDRW discs ..................................................21
PLAYING
Playing a CD...............................................................22
Selecting a track ........................................................22
Search ........................................................................23
Shuffle (random order) play.......................................23
Repeat CD, track or program .....................................23
PROGRAMMING
Remarks about programming.....................................24
MENU MODE/CD TEXT INPUT
Remarks about Menu mode.......................................25
General operation of Menu .......................................25
A. Text input...............................................................26
B. Erasing text............................................................26
C. Reviewing CD Text memory...................................27
D. Auto track increment.............................................28
E. Balance...................................................................28
FIXING PROBLEMS
Troubleshooting..........................................................29
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Welcome !
Thank you for buying this Philips Compact Disc Recorder.
In the eighties Philips invented a new audio system - the CD.
The CD (compact disc) revealed to you the new dimensions of
digital sounds and added to the pleasures of audio.
Compact disc technology permits a high contrast in loud as
well as in quiet passages, with perfect channel separation.
Philips has now further developed compact disc technology
and the result is the CD recorder.
With your Philips CD Recordable/ReWritable Recorder, you
can record, play and erase your own high-quality audio CDs,
subject to legal restrictions on copying. Naturally, you will
also be able to play all pre-recorded audio CDs.
Note: In the United Kingdom and certain commonwealth
countries use of the Philips CD Recordable/Rewritable
recorder as shown or suggested in this user manual
may require the authorization of copyright holders.
Technical data
About this manual
Subject to modification without notice.
This manual gives instructions for operating this CD recorder
where:
General
- the figures (1) throughout the text indicate a sequence of
actions necessary to perform a certain operation;
- the arrows (➜) indicate the reaction from the recorder;
- the dots (•) indicate remarks, advice or special options
within a sequence of actions. The dot-marked instructions
are not necessary for the required operation.
Power consumption ..........................................................15 W
Power consumption in Standby ..........................................6 W
Operating temperature ..................................................5-35° C
Weight..................................................................................4 kg
Dimensions ..................................................435 x 310 x 88 mm
Audio
Frequency response ............................................2Hz-22.050 Hz
Playback S/N (A-weighted) ............................................100 dB
Playback S/N ..................................................................100 dB
Playback dynamic range CDR............................................95 dB
Playback total harmonic distortion CDR........88 dB = 0.0039 %
Channel separation ........................................................100 dB
Recording S/N (A-weighted) ............................................98 dB
Recording S/N digital without SRC ..................equal to source
Recording dynamic range..................................................92 dB
Recording total harmonic distortion + noise ..85 dB (0.0056%)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION AND DISCS
Discs for recording
Maintenance
For recording use, special audio discs must be used (for music
only). These Discs bear the logos as shown below. The text
‘DIGITAL AUDIO’ is present!
For recording it is very important to use dust and scratch free
discs.
To clean a CD, wipe it in a straight
line from the center toward the edge
using a soft, lint-free cloth. A
cleaning agent may damage the
disc! Write only on the printed side
of a CDR or CDRW, and only with a
soft felt-tipped pen.
Your recorder uses two types of discs for recording purposes:
- CD-Audio Recordable (CDR) discs:
fully recorded and finalized, these discs
play on all CD players and recorders.
Recordable
- CD-Audio ReWritable (CDRW) discs:
can be recorded, erased and re-recorded
hunderds of times. When finalized, they
Clean the CD recorder with
a soft, slightly dampened lint-free
cloth. Do not use any cleaning
agents as they may have a corrosive
effect.
ReWritable
play on CDRW compatible CD
players and recorders. In the course of
1999 most Philips CD players and recorders will be CDRW
compatible.
Important:
To ensure proper working of the set we recommend the use of
Philips audio CDR and audio CDRW discs only.
Do not expose the CD recorder,
batteries or CDs to humidity, rain,
sand or excessive heat (caused by
OPEN
/
CLOSE
P
L
A
Y
/
P
A
U
S
E
REC
STOP
TYPE
RECORD
FINALIZE
ERASE
SOURCE
DISPLA
Y
PROGRAM
SHUFFLE
SCROLL
E
A
S
Y
J
O
G
S
M
T
E
N
RE/
CANCEL/
DELETE
AUDIO CD RECORDABLE/REWRIT
ABLE
Recorda
ble
R
E
P
E
A
T
heating equipment or direct
sunlight).
ON
/
OFF
ENTER
INFRA RED
PHONES
AUDIO CD RECORDABLE/REWRIT
ABLE CDR770
Discs for playback
Your CD recorder is able to play:
Always keep the tray closed to avoid dust on the lens.
- All pre-recorded audio CDs.
- All Audio CDR and Audio CDRW.
The lenses may cloud over when the CD recorder is suddenly
moved from cold to warm surroundings. It is not possible to
play a CD then. Leave the CD recorder in a warm environment
until the moisture evaporates.
Note: CDR(W) discs recorded with a computer can only be
used when they are correctly treated according the
audio standard (IEC958: Consumer part).
Single session only!
Accessories
- 2 Analog audio cables (with red and white plugs)
- 1 Digital coaxial cable (with black plugs)
- Power cord
- 2 Batteries
- Remote control
- Guarantee
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTIONS
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24
OPEN / CLOSE
REC
TYPE
PLAY
/
P
AUSE
STOP
RECORD
FINALIZE
ERASE
SOURCE
DISPLA
Y
PROGRAM
SHUFFLE
SCROLL
REPEAT
STORE/
STORE/
CANCEL/
DELETE
EASY JOG
EASY JOG
MENU
MENU
REM
TIME TRACK
TEXT LEVEL
TOTAL
REM TRACK
TIME
STEP
3
2
1
1
2
3
4
5
6
7
8
9
1
0
1
1
12
13 14
15 16
17
18 19
20 21
2
2
2
3
2
4
25
+
SYNC MANUAL
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
PROGRAM
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
1
1
CD
RW
RECORD
ANALOG
SCAN
TRACK
ENTER
INFRA RED
ON / OFF
PHONES
AUDIO CD RECORDABLE/REWRIT
ABLE CDR77X
CDR
L
L
R
IN
R
OUT
ANALOG
IN
OUT
DIGITAL
IN
OPTICAL
1
2
3
4
5
6
¡ STORE/MENU ............- enters Menu mode
- stores Menu settings
Controls on the front
™ CANCEL/DELETE ......- deletes tracks from a program
1 ON/OFF........................turns the CD recorder ON and OFF
2 Standby indicator
3 Disc tray
- deletes text in Menu mode
- returns to a higher level in the
menu
4 OPEN/CLOSE /..........opens/closes disc tray
5 PLAY/PAUSE 2; ......starts play/interrupts play or
recording
£ PHONES......................socket for headphones
≤ IR sensor ....................receives signals from the remote
control
6 STOP 9........................stops/clears a program
7 REC(ord) TYPE ............selects recording modes
8 RECORD ......................starts recording, finalizing, erasing
9 FINALIZE ....................selects finalize mode
0 ERASE..........................selects erasing mode (disc or track)
! SOURCE ......................selects input source
@ DISPLAY......................selects display information,
permanent text scrolling and time
Note: Unless stated otherwise, all controls are on the front of
the CD recorder. When provided on the remote control,
you can also use the corresponding buttons, after
selecting the CD recorder or separate CD player by
pressing CDR or CD.
# Display..........................information screen
$ SHUFFLE......................plays CD(RW) or program in
random order
% PROGRAM ..................opens/closes program memory
^ SCROLL........................activates scrolling of text over the
display (once)
Connections at the back
1 Connection to mains
2 ANALOG IN ................connects to the line output of an
amplifier (left and right)
& REPEAT........................repeats play (all, program or track)
* Q ............................- searches backward
- cursor control in Menu/Prog.
3 ANALOG OUT CDR....connects to the line input of an
amplifier (left and right)
4 DIGITAL IN..................connects to the digital coaxial
review mode
output of an external CD player
( R ............................- searches forward
- cursor control in Menu/Prog.
5 DIGITAL OUT CDR ....connects to the digital coaxial
input of e.g. amplifier or recording
review mode
device
) ¡EASY JOG ™ ........- previous/next track (Play and
6 OPTICAL IN ................connects to the digital optical
(rotate)
Program mode)
output of an external CD player
- recording level control (recording)
- selects settings (menu on)
ENTER (push) ..............- plays selected tracks
- selects settings in Menu mode
- programs track numbers
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
DISPLAY indications
DISPLAY messages
Messages, as listed and explained here, may appear on the
display for your guidance.
1
2
3
4
5
6
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
General
7
8
24
23
22
21
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
+
READING..........................reading disc information
OPEN..................................during tray opening
CLOSE ..............................during tray closing
NO DISC..........................no disc inserted, disc unreadable
or disc inserted upside down
SYNC MANUAL
RECORD
PROG
9
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
10
RW
20 19 18 17 16 15 14
13
12 11
PROG FULL....................program full
INSERT DISC ..............insert disc or insert disc in correct
way
WRONG DISC..................inserted disc is no audio CD
UNFINALIZED ..............unfinalized CDR(W) disc
MEMORY XXù............indicates the amount of text
memory used for unfinalized discs
1 REM TIME ..................remaining time
2 TRACK ........................track number
3
FE
..............................balance (lights during balance
adjustement)
4 TOTAL REM
TRACK TIME ..............total or remaining time of disc or
track
Recording
}
5
................................remote control active
6 STEP ............................indicates the number of tracks in a
WAIT..................................- when STOP 9is pressed during
recording
program
- when STOP 9is pressed during
recording the first 4 seconds of a
track
7 Track bar ....................indicates:
- tracks on a disc or in a program
- track in play
8 + 20 ..............................disc or program contains more
UPDATE ..........................updating disc contents
DISC FULL....................no more recording possible
DIGITAL 1....................digital coaxial input 1 selected
OPTICAL ........................digital optical input selected
ANALOG............................analog input selected
COPY PROTECT............no digital recording can be made
of the connected source
NOTFINALIZED............when opening the tray with an
unfinalized disc inserted
MAKE CD..........................start of synchronized recording of
a complete disc and Auto Finalize
than 20 tracks
9 PROG(ram) ..................flashes during programming/ lights
in program mode
0 REPEAT TRACK/ALL..lights up when a track/ complete
disc (or program) is repeated
! SCAN ..........................lights up when the first 10
seconds of each track are played
@ SHUFFLE ALL..............plays tracks in random order
# L/R ; ;........................Record/play level bar, indicates
the audio signal level
function selected
$ CD ................................CD inserted (a pre-recorded CD or
RECORD DISC ..............start of synchronized recording of
a complete disc
RECORD TRACK............start of synchronized recording of
a single track
REC MANUAL..................manual start of recording selected
_XX DB............................level is being adjusted
ERASE TRACK ..............when erasing one or more tracks
ERASE DISC..................when erasing a disc
FINALIZE CD ..............when finalizing a disc
FINALIZED....................when trying to finalize an already
finalized disc
finalizsed CDR or CDRW disc)
% ;....................................pause function active
^ B ................................lights during play
& R(W) ............................unfinalised CD R(W) disc inserted
* 0..................................lights during recording
( d................................lights during recording
) ANALOG......................analog input selected
¡ OPTICAL I ..................optical input I selected for external
recording
™ DIGITAL I ....................digital input selected for external
recording
CHECK INPUT ..............when RECORD is pressed while no
digital source is detected
XX XX ERASE................time countdown when erasing a
track or a disc
£ SYNC ..........................synchronized recording active
≤ MANUAL ....................manual recording active
XX XX FINAL................time countdown when finalizing a
disc
PRESS RECORD............to start manual recording,
finalizing or erasing
START SOURCE............to start synchronised recording
from a source (e.g. CD player)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
FINALIZED CD............when trying to record on a
finalized CDR or a prerecorded CD
MENU messages - See Menu mode
UNFINALIZE/ ................when trying to record on a
REM
REC TIME TRACK
TOTAL REM TRACK TIME
STEP
PRESS ENTER
finalized CDRW
STORE/
STORE/
CANCEL/
DELETE
EASY JOG
EASY JOG
MENU
MENU
PROF SOURCE ..............when a professional source is
connected
SYNC MANUAL
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
ENTER
SCAN TRACK
Play
PROGRAM..........................program mode selected
ALBUM TITLE ..............will be followed by album title
TRACK TITLE ..............will be followed by track title
ALBUM ARTIST............will be followed by artist name
TRACK ARTIST............will be followed by track artist
name
Menu messages
NO TRACKS....................when attempting to edit text for a
disc which has no tracks
TEXT EDIT....................when entering Text Edit mode
ALBUM ARTIST............when editing or erasing an artist
name
ALBUM TITLE ..............when editing or erasing a title
ARTIST TR N................when editing or erasing an artist
name per track
TITLE TR N..................when editing or erasing a title per
track
TEXT ERASE..................when entering Text Erase mode
ALL TEXT ......................when entering All Text mode
ERASE OK ......................when confirmation for erasing has
to be given with ENTER key
ERASE ALL OK ............when confirmation for erasing has
to be given with ENTER key
ERASE MEMORY............when waiting for confirmation
when erasing a disc
Others
NO AUDIO TR................when the recorder enters a data
track during recording
FINALIZE CD ..............laser power calibration performed
96 times, finalize disc
INITIALIZING............during laser power calibration for
unfinalized discs
DISC RECOVER............during disc recovering after power
failure
OPC ERROR....................OPC failure during OPC procedure
(OPC = Optimum Power
Calibration)
RECORD ERROR............recording error in menu mode
DISC ERROR..................when trying to record on or finalize
a recovered disc
MEMORY VIEW ..............when selecting text review per
unfinalized disc in memory
MEMORY EMPTY............when REVIEW is selected while no
text is in memory
AUTO TRACK..................when selecting auto track
increment ON or OFF
MEMORY FULL/..............when text memory is full. To add a
FINALIZE CD
CD to the list, first finalize or
erase another disc from the list.
NOT POSSIBLE............when trying to erase a CDR
ON ......................................Auto Track increment on
OFF....................................Auto Track increment off
SET BALANCE ..............when selecting BALANCE
NO TEXT..........................no text stored for disc
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connections general
Analog connections
For recording the following inputs are present:
- Digital optical input.
- Digital coaxial input.
Analog connection is required for playback of CDs (use cable
2) and for recording from external analog sources
(use cable 1).
- Analog input.
For playback the following outputs are present:
- Digital coaxial output.
- Analog output.
We advise you to connect these to the CD input on your
amplifier.
L
L
R
RECEIVER
R
IN
OUT
TAPE
2
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
1
CD RECORDER
L
L
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
R
R
IN
OUT
ANALOG
IN
DIGITAL
OUT
IN
OPTICAL
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your CD recorder will
ensure very good audio performance when recordings are
made from the analog input.
Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
1 For recording, connect cable 1 between the ANALOG IN-
sockets on the CD recorder and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the CD recorder ensures a
very good sound quality via the analog output.
Note: For recording directly from a CD player, the analog
input of the CD recorder should be connected to the
analog output of the CD player.
We advise you to always establish both digital and analog
connections. In this way you can always make analog
recordings when digital recording is not possible.
2 For playback, connect cable 2 between the ANALOG OUT-
sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.
We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections
you can always contact the Philips Consumer Service desk in
your country.
Note: Never use the PHONO input.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Digital coaxial connections
Digital optical connections
Digital coaxial connection is only required in case you wish to
record from a CD player with a digital coaxial output.
Digital optical connection is only required in case you wish to
record from a CD player with a digital optical output.
L
RECEIVER
L
RECEIVER
L
L
R
R
R
R
IN
IN
OUT
OUT
2
TAPE
2
TAPE
1
1
L
L
L
L
CD RECORDER
CD RECORDER
R
R
R
R
IN
IN
OUT
OUT
ANALOG
IN
ANALOG
IN
OUT
OUT
DIGITAL
GITAL
I
IN
OPTAL
OPTICAL
3
4
L
L
CD PLA
CD PLA
R
YER
OUT
R
YER
OUT
ANALOG
OUT
ANALOG
OUT
DIGITAL
OUT
DIGITAL
OUT
OPTICAL
OPTICAL
Use the digital coaxial cable supplied.
When connecting the Digital
Optical cable, make sure it
is fully inserted until
1 For recording, connect the cable 3 between the DIGITAL
IN-socket on the CD recorder and the DIGITAL OUT-socket of
a CD player.
there is a click.
Note: Your CD recorder is equipped with a digital coaxial
output. This output can be used for digital playback.
1 Remove the dust caps from the digital optical connection.
(We recommend you save the cap).
2 For recording, connect a fibre-optic cable 4 between the
digital optical input of the CD recorder and the digital-
optical output of a CD player.
Note: For playback, the digital coaxial output or analog output
should be connected to an amplifier.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Power supply
Inserting batteries in the remote control
1 Plug the power cord supplied into the MAINS connector on
the CD recorder, then into a mains socket.
2 Press ON/OFF.
➜The CD recorder will switch on.
1 Open the battery compartment cover.
Note:
2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as
shown.
- If the CD recorder is in Standby mode (red led on), press any
key to activate the recorder.
- The CD recorder will automatically adjust to the local mains
voltage.
- When the CD recorder is in the ‘OFF’ position, it is still
consuming some power. If you wish to disconnect your
player completely from the mains, withdraw the plug from
the AC outlet.
3 Replace the cover.
Note: We recommend you use 2 batteries of the same type
and condition.
Batteries contain chemical substances, so they should
be disposed of properly.
Setup recommendations
- Place the CD recorder on a solid, vibration free surface.
- Do not place the CD recorder near a source of heat or in
direct sunlight.
- Do not use the CD recorder under extremely damp
conditions.
- If the CD recorder is placed in a cabinet, make sure that a
2.5 cm space remains free on all sides of the CD recorder
for proper ventilation.
Important:
- Do not put the CD recorder on top of other equipement that
heats up the CD recorder (e.g. receiver or amplifier).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Remote control commands
Inserting discs
B
STANDBY
......................................
SCAN
ABC
SHUFFLE
DEF
REPEAT
GHI
......switches to Standby/On
SCAN....................................................
......plays the first 10 seconds of each
track
1
JKL
2
MN
3
OPQ
4
RST
5
UVW
6
XYZ
OPEN/CLOSE
PLA
Y/P
AUSE
STOP
REC
TYPE
RECORD
8
SPACE
9
SCROLL
7
FINALIZE
ERASE
SOURCE
TRACK INCR.
SHUFFLE ..............................................
......plays CD(RW) or program in
random order
REPEAT ................................................
......repeat play
DI
S
0
CDR
CD
2
ON/OFF
J
K
9
;
5
6
COMMERCIAL
A
U
D
I
O
C
D
R
E
C
O
R
D
A
B
E
/
R
E
W
R
I
T
A
B
L
E
MENU/
STORE
PROG.
Recordable
Number/alphabet keys 0 - 9 ............
......- selects a track by number
- selects character for text input
STRACK INCR(ement) ........................
......increases track numbers during
recording
ENTER CANCEL
1 Press OPEN/CLOSE to open the disc tray.
➜ OPENlights up.
SCROLL..............................activates scrolling of text over the
2 Insert a CD, CDR or CDRW in the appropriate recess in the
display
tray, label side up.
CDR ....................................selects CD recorder
CD ......................................selects CD player, can be used to
control a separate Philips CD player
3 Press OPEN/CLOSE to close the tray (see also Playing a CD).
➜ CLOSElights up, followed by READINGand the
display will show the type of disc you inserted.
2
......................................starts CD(RW) play
O ......................................previous track (Play and Program
REM
REC
TRACK TIME
STEP
TIME TRACK
TOTAL REM
mode)
P ......................................next track (Play and Program
mode)
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
9
......................................stops CD(RW) and clears a
program
Q....................................- searches backward
- cursor control in Menu/Prog.
review mode
R....................................- searches forward
• If you insert a blank or partly-recorded CDR or unfinalized
CDRW, the CD recorder will calibrate the disc for optimum
recording. During this process the display will first show
INITIALIZINGand then the number of audio tracks.
Calibration can take up to 25 seconds.
- cursor control in Menu/Prog.
review mode
REM
TRACK TIME
STEP
TIME TRACK
TOTAL REM
;
......................................interrupts CD(RW) play/recording
MENU/STORE ..................- enters Menu mode
SYNC MANUAL
RECORD
PROG
- stores Menu settings
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
PROG.(ram) ........................opens/closes program memory
ENTER................................- selects settings in Menu mode
- programs track numbers
• If a CDR(W) is finalized it will show CD on the display.
- starts playback of selected track
CANCEL ............................- deletes tracks from a program
• If CD-text is available the TITLE/ARTIST will scroll by.
- deletes text in Menu mode
REM
TRACK TIME
STEP
TIME TRACK
TOTAL REM
- returns to a higher level in the
menu
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
Note:
- Only Audio CDs will be accepted. If a non-audio disc is
inserted, the display shows WRONG DISC/ USE AUDIO
CD.
- For recording it is important that the blank disc is
completely free from dust particles or scratches. (see
maintenance)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Remarks about recording
Recording modes
You will soon discover how easy it is to make your own CDs.
Your recorder offers several recording modes.
Nevertheless, it is advisable to use a CDRW disc for your first
try.
- RECORD DISC - to make a synchronized recording of the
complete disc or a program simply by starting the source.
- RECORD TRACK - to make a synchronized recording of a
single track simply by starting the source.
• If the disc is a CDRW and is already finalized you must
unfinalize it first.
- REC(ord) MANUAL - to manually start a recording simply by
pressing the RECORD key.
- MAKE CD - to make a synchronized recording of the
complete disc or a program simply by starting the source.
Finalizing will be done automatically. (Active for digital
recordings.)
• The recording procedure is the same for CDRs and
CDRWs.
• If the disc already contains recordings, the CD recorder will
automatically search for the end of the last track, so that
recording can start from there.
REM
TIME TRACK
TOTAL REM
TRACK TIME
STEP
• CD text can be added to a recording in Stop mode and
during recording.
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
• CD text can not be recorded from an external CD player.
(Text information is not available on the output of the CD
player.)
Some remarks on recording:
- When Auto track is ON (default setting), track numbers will
automatically be increased during recording.
- By programming the source first, a compilation can be
recorded.
• There must be at least 7 seconds of recording time left on
the disc, otherwise you will not be able to enter record
standby mode. DISC FULLthen lights up.
- If a finalized CD recordable disc is inserted in the CD
recorder, FINALIZED CDwill be displayed when REC
TYPE is pressed. Recording is not possible.
- If a finalized CD rewritable disc is inserted in the CD
recorder, UNFINALIZEand PRESS ENTERwill be
displayed when the REC TYPE is pressed. If ENTER is
pressed, the disc will be unfinalized.
• If the display indicates COPY PROTECT, no digital
recording can be made of the source material. Recording
will not start.
• The Serial Copy Management System (SCMS) only
allows digital recording under specific conditions:
- This means that it is not possible to make a digital copy
from a digital copy.
- Analog recording is always possible !
- The number of recordings from the original is unlimited.
• A maximum of 99 tracks can be recorded on a disc.
Minimum allowable track length is 4 seconds.
• Recordings from DAT or DCC players will not always stop
automatically.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers do not use REC
MANUAL.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Start autostart recording
Autostart recording
1 To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and d
lights continuously.
OPEN / CLOSE
REC
PLAY
/
P
AUSE
STOP
RECORD
TYPE
STORE/
STORE/
FINALIZE
CANCEL/
DELETE
ERASE
EASY JOG
EASY JOG
SOURCE
MENU
MENU
DISPLA
Y
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
• If, however, you start the source during a track, recording
starts at the beginning of the next track or after 2.7 seconds
of silence in analog recordings.
ENTER
INFRA RED
PHONES
ON / OFF
• To check the elapsed recording time, press DISPLAY. (This
can also be done during recording)
This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.
• The EASY JOG/ENTER key can be used to adjust the
recording level.
• The recorder stops automatically.
Important:
- Recording from CD-changers should always be started in the
RECORD DISC, RECORD TRACK or MAKE CD mode.
2 To stop recording manually, press STOP on the CD recorder.
➜ UPDATElights up and SYNC and dgo out.
Preparing for autostart recording
• If STOP 9was pressed within 3 seconds after pressing
PLAY, no recording will take place.
1 Make sure the disc is absolutely free of scratches and dust
particles.
• To interrupt recording, press PAUSE on the CD recorder.
➜ dstarts to flash. (Autostart recording is disabled.) To
resume, press RECORD on the CD recorder.
2 Press SOURCE repeatedly until (depending on the
connection used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICALor ANALOGappears on the
display.
After recording the display will show UPDATEfor several
seconds.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- Auto track is always active.
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
Important:
3 With the CD recorder stopped, press REC TYPE
once: to select ‘RECORD DISC’;
twice: to select ‘RECORD TRACK’;
four times: to select ‘MAKE CD’. (Active for digital
recordings.)
➜ dand SYNC start to flash and the display shows the
selection.
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
• If input label (DIGITAL I) flashes, the digital connection is
incorrect.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
3 With the recorder stopped, press REC TYPE three times to
enter the Manual Record standby mode.
➜ MANUAL starts to flash and the display shows REC
MANUAL.
Manual recording
OPEN / CLOSE
REC
PLAY
/
P
AUSE
STOP
RECORD
STORE/
STORE/
MENU
MENU
TYPE
FINALIZE
CANCE
DELE
EASY JOG
EASY JOG
ERASE
SOURCE
T
DISPLA
Y
REM
REC TIME TRACK
TOTAL REM TRACK TIME
STEP
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
ENTER
INFRA RED
PHONES
SYNC MANUAL
RECORD
PROG
ON / OFF
4 Play the source first to set the optimal recording level on
the CD recorder.
Important:
- Recording from CD-changers should always be started in the
RECORD DISC, RECORD TRACK or MAKE CD mode.
- Only make analog recordings when digital recording is not
possible.
5 Rotate the EASY JOG/ENTER key until, on the Record/Play
Level bar, all the blue segments are alight, but the red
segments do not light continuously during the loudest
passages.
➜ Display shows _XX DB. (Decibel, e.g. -3DB)
Preparing for manual recording
6 Stop the source.
1 Make sure the disc is absolutely free of scratches and dust
particles.
Start manual recording
2 Press SOURCE repeatedly until (depending on the
connection used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICALor ANALOGappears on the
display.
1 To start recording, press RECORD on the CD recorder and
immediately start the source (from Pause or Stop mode).
➜ dlights continuously. The track number and recording
time appear on the display.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
• If CHECK INPUTmessage also flashes, the digital
connection is incorrect.
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
• To record a 3-second silence at the start of a track, press
PAUSE on the CD recorder before starting the source.
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
• To check the elapsed recording time, press DISPLAY on the
CD recorder. (This can also be done during the recording.)
• When Auto Track is ON (default setting), track numbers will
automatically be increased during recording.
2 To stop recording, press STOP on the CD recorder.
➜ UPDATElights up and dgoes out.
• To switch off the Auto Track function you have to enter
Menu mode.
If you wish to increase track numbers manually, press
TRACK INCR(ement) on the remote control. For further
instructions see Menu mode.
• If STOP was pressed within 3 seconds after RECORD, no
recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
dstarts to flash. Resume at step 1.
ON (AUTO): The track increments are automatically taken over
from the digital source material or after 2.7
seconds silence during analog recording.
After recording the display will show UPDATEfor several
seconds.
OFF (MANUAL): While recording track numbers can be
incremented manually by pressing TRACK
INCR(ement) on the remote control.
Note: With AUTO TRACKON, the recorder will stop and go
to REC STANDBY for 1 minute and then goes to stop
mode automatically. Recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds
silence. With AUTO TRACK OFF, the auto stop
mode is disabled.
(Minimum track length is 4 sec.) (This can
also be done in Auto track ON mode.)
• Track numbers cannot be changed after recording.
Important:
Note: Auto track works only with Consumer Sources with a
digital output signal according to the IEC 958
(consumer part) audio standard.
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Finalizing CDR & CDRW discs
Unfinalizing CDRW discs
During finalizing the table of contents (TOC) is written to the
disc.
For CDRW discs only.
If you want to make more recordings (or erasures of tracks) on
a finalized disc you must unfinalize it first. The Table of
Contents (TOC) will be removed.
Finalizing is a simple procedure, necessary to:
- be able to play recordings on a CD PLAYER,
- avoid further unwanted recordings on a disc,
- avoid erasure of tracks on a CDRW,
- write CD text on a CDR(W).
To unfinalize:
1 With the CD recorder stopped, press REC TYPE or ERASE.
➜ UNFINALIZE and PRESS ENTER will appear on
the display.
Auto finalizing
REM
TRACK TIME
STEP
TIME TRACK
TOTAL REM
Auto finalizing is possible when using the MAKE CD recording
function.
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
Manual finalizing
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1 Make sure the disc (in the CD recorder) is absolutely free of
scratches and dust particles.
SYNC MANUAL
RECORD
PROG
2 With the recorder stopped press FINALIZE.
➜ The display shows FINALIZE CDand PRESS
RECORD.
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
2 Press JOG (ENTER).
➜ The disc will now be unfinalized and can be recorded on
again.
SYNC MANUAL
RECORD
PROG
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
SYNC MANUAL
RECORD
PROG
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SYNC MANUAL
RECORD
PROG
• If no further recording or erasure is required press Stop 9.
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
Note:
3 Press RECORD.
- Unfinalizing will take approximately 1.5 minutes.
- When unfinalizing a CDRW disc with text on it available,
this text will be transferred to the CD recorder memory. It
may occur that the text memory is full. The message
MEMORY FULL/FINALIZE CDwill be displayed. You
will now have to erase text, stored for other discs, or
finalize another disc in order to obtain memory space.
➜ XX XX FINALand the approximate finalization time
appears on the display.
The display counts down through the finalization.
On completion, the total number of tracks and the total
time recorded appears on the display.
For CDR(W), CDR(W) changes to CD on display.
Finalizing will take at least 2 - 4 minutes.
Note:
- During finalization, the CD recorder accepts no operating
commands.
- When a CDR is finalized no more recordings can be added.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
To erase the entire disc:
Erasing CDRW discs
1 Press ERASE twice.
REC
TOP
STOP
RECORD
TYPE
FINALIZE
STORE/
STORE/
ERASE
SOURCE
CANCEL/
DELETE
EASY JOG
EASY JOG
➜ The display shows the number of tracks and their total
playing time. ERASE DISCand PRESS RECORD
light up.
MENU
MENU
Recordable
REWRIT
ABLE
• If the disc is finalized, CD appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
ENTER
PHONES
For unfinalized CDRW discs only.
You can erase:
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
- Tracks can only be erased from the end.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
1
2
6
7
8
3
4
5
9
10
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
- With the EASY JOG you can erase more tracks.
1
2
6
7
8
3
4
5
10
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
Note: It is not possible to erase tracks within the sequence.
- It is also possible to erase the entire disc at once.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
To erase one or more tracks from the end:
1 Press ERASE once.
2 Press RECORD.
➜ The display shows the total countdown time and
➜ The display shows the number of tracks and their total
playing time. ERASE TRACKand PRESS RECORD
lights up.
ERASE. The complete disc will be erased.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
•If the disc is finalized, CD appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
SCAN TRACK
Erasure of a complete disc may take up to 15 seconds.
2 Select the track(s) you wish to erase by turning the EASY
JOG/ENTER key to the left.
➜ The selected track numbers start blinking on the track
bar.
➜ The display shows the remaining time after erasing the
selected track(s), the shown track will also be included
in the erasure of tracks.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
3 Press RECORD.
➜ The display shows the total countdown time and
ERASE.
➜ After the selected track(s) have erased, the display
shows the remaining tracks and their total playing time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING
Playing a CD
Selecting a track
OPEN / CLOSE
REC
PLA
Y
/
P
AUSE
STOP
TYPE
OPEN / CLOSE
REC
PLA
Y
/
P
STORE/
STORE/
AUSE
STOP
CANCEL/
DELETE
EASY JOG
EASY JOG
RECORD
TYPE
MENU
MENU
FINALIZE
ERASE
SOURCE
DISPLA
Y
AUDIO CD RECORDABLE/REWRIT
ABLE
AUDIO CD RECORDABLE/REWRIT
ABLE
Recordable
ENTER
1 Press PLAY/PAUSE 2;to start CD play.
Selecting a track during play
➜ 2lights up and the track number and track time of the
track in play appear on the display.
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
2 Press DISPLAY once, twice, three or four times to see:
➜ Remaining track time, total remaining time, permanent
text information and track time (see Menu mode).
➜ Play skips to the beginning of the selected track.
or
Key in the required track number using the numerical keys
on the remote control. For 2-digit track numbers, press the
keys in rapid succession.
3 To interrupt play temporarily, press PLAY/PAUSE 2;again.
➜ ;lights on the display
➜ Play skips to the beginning of the selected track.
or
4 To continue play, press PLAY/PAUSE 2;again.
Press J or Kon the remote control one or more times.
➜ Play skips to the beginning of the present, previous or
subsequent tracks.
5 To stop play, press STOP 9.
➜ The number of tracks and the total playing time appear
on the display.
Selecting a track when CD play is stopped
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm or press PLAY/PAUSE 2;to start playing.
or
1 Key in the required track number using the numerical keys
on the remote control. For 2-digit track numbers, press the
keys in rapid succession. Play starts.
or
1 Briefly press Jor Kone or more times.
2 Start playback by pressing PLAY/PAUSE 2;, EASY
JOG/ENTER or ENTER on the remote control.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING
Search
Repeat CD, track or program
1 Press REPEAT one or more times during CD play.
➜ When REPEAT TRACK lights up, the current track plays
repeatedly. When REPEAT ALL lights up, the disc or
program plays repeatedly.
STORE/
STORE/
CANCEL/
DELETE
EASY JOG
EASY JOG
MENU
MENU
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
1 Hold down 5or 6(in Play mode).
➜ The player first searches backwards or forwards at 10
times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
2 To return to normal play, press REPEAT one or more times
until:
➜ The REPEAT label disappears from the display.
2 Release the button at the desired passage.
➜ Play starts at the desired passage.
Note:
- You can use shuffle in combination with REPEAT ALL or
programmed play.
- REPEAT is also cleared if you open the disc tray.
Note: During Shuffle, Repeat Track or Programmed play,
search is restricted to within the track being played at
the time.
Shuffle (random order) play
1 Press SHUFFLE before or during CD play to start shuffle
play.
➜ The tracks on the CD (or program if set) play in random
order.
2 Press SHUFFLE again to return to normal CD play.
➜ CD recorder goes to Stop mode.
Note: Shuffle is also cleared if you open the disc tray.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING
Clearing a program
Remarks about programming
1 Press STOP 9if necessary to stop programmed play.
•You can program up to 99 tracks to play in any desired
sequence.
2 Press STOP 9again to clear the program.
➜ PROG disappears from the display.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
•The program is also cleared if you open the disc tray.
Erasing a track from a program
Programming
1 In Stop mode press PROGRAM to enter Program mode.
➜ PROG flashes and PROGRAMfollowed by track
information appears on the display.
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5or 6to select the track from which to delete.
➜ The track number and program step will be shown on
the display.
REM
REC TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
CD
DIGITAL
OPTICAL
ANALOG
I
I
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
RW
SCAN TRACK
REM
1
REC TIME TRACK
TOTAL REM TRACK TIME
STEP
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
2
7
8
11
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
➜ PROG lights continuously.
5 Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROGRAM followed by 5or
6with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE
Remarks about Menu mode
General operation of Menu
•In Menu mode you will have access to a number of features
which are not available via the regular keys (on the deck’s
front and the remote control).
Menu active in Recording or Stop mode.
1 When using the remote control select first CDR.
2 Press STORE/MENU on the deck or the remote control to
enter Menu mode.
➜ TEXT EDITappears on the display.
•The TEXT submenus (A-B) allow you to give names to discs
and tracks. The disc and track names will be displayed
during playback.
3 Rotate EASY JOG/ENTER to select the required submenus.
4 Press EASY JOG/ENTER to confirm selections.
•In the RECORDING submenus (D-E) you can set Auto Track
and Balance.
5 Rotate EASY JOG/ENTER to select options in the submenus.
6 Press EASY JOG/ENTER to confirm selections.
•All settings (except Balance) made in Menu mode will be
stored in the deck’s memory and can be called up and
changed at any time.
7 Press STORE/MENU to store settings and return to the
submenu.
8 Press STOP 9to store settings and exit Menu mode.
Note: Text can only be edited for unfinalized discs. (Finalized
CDRW discs must be unfinalized first.)
STORE/
STORE/
CANCEL/
DELETE
EASY JOG
EASY JOG
MENU
MENU
MAIN MENU
LEVEL 1
LEVEL 2
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
TEXT EDIT
SYNC MANUAL
ALBUM ARTIST
ALBUM TITLE
ARTIST TR 1
TITLE TR 1
ARTIST TR N
TITLE TR N
1
2
3
4
5
6
7
8
9
10 11 12 13 14
A
B
ENTER
INFRA RED
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
PHONES
RW
SCAN TRACK
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
9
10 11 12 13 14
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
CDR
CD
2
J
K
9
;
5
6
MENU/
STORE
REM
TRACK TIME
STEP
TIME TRACK
TOTAL REM
PROG.
TEXT ERASE
SYNC MANUAL
ENTER CANCEL
1
2
3
4
5
6
7
8
9
10 11 12 13 14
ALL TEXT
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
SCAN TRACK
ALBUM ARTIST
ALBUM TITLE
ARTIST TR 1
TITLE TR 1
ARTIST TR N
TITLE TR N
1
2
3
4
5
6
7
8
9
10 11 12 13 14
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
SCAN TRACK
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
SCAN TRACK
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
MEMORY VIEW
SYNC MANUAL
1
2
3
4
5
6
7
8
9
10 11 12 13 14
"TITLE CD 1"
"TITLE CD 2"
"TITLE CD 3"
C
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
SCAN TRACK
"TITLE CD n"
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
AUTO TRACK
SYNC MANUAL
1
2
3
4
5
6
7
8
9
10 11 12 13 14
D
E
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
SCAN TRACK
ON
OFF
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
SET BALANCE
SYNC MANUAL
1
2
3
4
5
6
7
8
9
10 11 12 13 14
RECORD
PROG
SHUFFLE ALL
REPEAT
DIGITAL
OPTICAL
ANALOG
I
I
CD
RW
SCAN TRACK
L 100 R 100
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE/CD TEXT
A. Text input / text edit
B. Erasing text / text erase
ALL TEXT
TEXT ERASE
TEXT EDIT
ALBUM ARTIST
ALBUM ARTIST
ALBUM TITLE
ARTIST TR N
TITLE TR N
ALBUM TITLE
ARTIST TR N
TITLE TR N
CD Text can be added to a recording or changed in Stop mode
or during recording.
1 Press STORE/MENU.
➜ TEXT EDITappears on the display.
Text will be stored in the recorder memory and can be edited
until the CDR is finalized. Text on a (finalized) CDRW can be
edited at any time.
2 Rotate the EASY JOG/ENTER key to select the TEXT ERASE
submenu.
➜ TEXT ERASEappears on the display.
1 Press STORE/MENU.
➜ TEXT EDITappears on the display.
3 Press EASY JOG/ENTER to confirm.
➜ ALL TEXTappears on the display.
2 Press EASY JOG/ENTER to confirm.
➜ ALBUM ARTISTappears on the display.
4 Rotate EASY JOG/ENTER to select the required option in
the submenu: ALL TEXT, ALBUM ARTIST, ALBUM
TITLE, ARTIST TR 1, TITLE TR 1, etc.
3 Rotate EASY JOG/ENTER to select the required option in
the submenu: ALBUM ARTIST, ALBUM TITLE,
ARTIST TR 1, TITLE TR 1, etc.
5 Press EASY JOG/ENTER to confirm.
➜ The display will ask you to reconfirm your selection.
ERASE OKappears on the display.
4 Press EASY JOG/ENTER to confirm.
➜ The first character space appears on the display.
6 Press EASY JOG/ENTER to reconfirm.
➜ UPDATEappears on the display.
5 Select the characters by rotating the EASY JOG/ENTER key
or by pressing the corresponding numeric/alphabet key on
the remote control.
7 Press STORE/MENU to return to the submenu or STOP 9to
exit.
6 Press EASY JOG/ENTER to store each character and move
to the next cursor position.
• With the 5 6keys you can move to a required cursor
position.
• With the CANCEL key you can delete a character.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
7 Press STORE/MENU to store a name you have entered and
return to the submenu resume at 3 or STOP 9to exit.
Note:
- A maximum of 60 characters can be stored per item.
- By pressing the EASY JOG/ENTER key or ENTER on the
remote control without selecting a character first, you can
insert a space between characters.
- When an artist’s name has been stored for a certain track,
the name will automatically be copied for the next track.
The name can be confirmed by pressing STORE/MENU or a
new name can be entered as described above.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE/CD TEXT
Note:
C. Reviewing CD Text in memory / memory view
- If there are no discs in the memory, the message MEMORY
EMPTYappears on the display.
MEMORY VIEW
CD 1
- When the text memory of your CD recorder is full, the
message MEMORY FULLwill appear, followed by
FINALIZE CD. If you want to add a CD to the list of
discs for which text is stored, you have to erase a disc from
this list or finalize another disc. (“for which text is stored”)
- MEMORY FULL/FINALIZE CDmay also appear when
unfinalizing a CDRW disc for which text was stored (see
‘Unfinalizing CDRW discs’). The same action(s) should be
taken in order to obtain memory space.
CD 2
CD N
CD Text is stored in the recorders memory. When a CDR(W)
will be finalized the CD Text will be written on the disc and
removed from the recorders memory. With the MEMORY
VIEW function one can view/delete the CD Text in the
recorders memory per unfinalized disc. The amount of memory
used is displayed each time the tray opens with an
unfinalized CDR(W) inserted.
(e.g.MEMORY 9%)
1 Press STORE/MENU.
➜ TEXT EDITappears on the display.
2 Rotate the EASY JOG/ENTER key to select the MEMORY
VIEW submenu.
➜ MEMORY VIEWappears on the display.
3 Press EASY JOG/ENTER to confirm.
➜ The first album title in the recorder memory appears on
the display.
4 Select the album title you wish to erase.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
5 Press EASY JOG/ENTER to confirm.
➜ ERASE MEMORYappears on the display.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
6 Press the EASY JOG/ENTER key to confirm the erasure of
the text for that particular disc.
➜ UPDATEappears on the display.
7 Press STORE/MENU to return to the submenu or STOP 9to
exit.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE/RECORDING SETTINGS
D. Auto track increment / auto track
E. Balance (only active in Record/Standby mode)
SET BALANCE
AUTO TRACK
ON
L 100 R 100
OFF
1 Press STORE/MENU.
➜ TEXT EDITappears on the display.
1 Press STORE/MENU.
➜ TEXT EDITappears on the display.
2 Rotate the EASY JOG/ENTER key to select the AUTO TRACK
submenu.
➜ AUTO TRACKappears on the display.
2 Rotate the EASY JOG/ENTER key to select the SET
BALANCE submenu.
➜ SETBALANCEappears on the display.
3 Press EASY JOG/ENTER to confirm.
➜ ONappears on the display.
3 Press EASY JOG/ENTER to confirm.
➜
FE and L 100 R 100appear on the display.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
4 Turn the EASY JOG/ENTER key to select Auto track ONor
OFF.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
•When ONis selected, track numbers will be automatically
incremented during recording.
4 Adjust recording balance by turning the EASY JOG/ENTER
•When OFFis selected, you can number the recorded tracks
key.
yourself.
•Turn left: the figure left (
F
) counts down, right counts up.
) counts down, left counts up.
REM
TIME TRACK
TOTAL REM TRACK TIME
STEP
STORE/
STORE/
CANCEL/
DELETE
EASY JOG
EASY JOG
MENU
MENU
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
•Turn right: the figure right (
E
SYNC MANUAL
RECORD
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
CD
DIGITAL
OPTICAL
ANALOG
I
I
RW
ENTER
5 Press EASY JOG/ENTER to confirm.
5 Press EASY JOG/ENTER to confirm.
➜ AUTO TRACKappears on the display.
6 Press STORE/MENU to store settings.
Note: The balance setting will not be stored permanently.
6 Press STORE/MENU to store settings and return to the
submenu or STOP 9to exit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
FIXING PROBLEMS
Will not record
• clean the disc
TROUBLESHOOTING
• check if CDR(W) is an unfinalized disc
• check that the disc is recordable and replace
if necessary
If your CD recorder is defective, it is wise to check this list
first. You may have forgotten a simple step.
• the disc is not an AUDIO disc (WRONG
DISC)
• wrong input source chosen. Input label
flashing (CHECK INPUT)
• text memory full (MEMORY FULL/
FINALIZE CD). When a CDRW has to be
unfinalized for recording. Erase text for other
disc(s) or finalize other disc(s) to obtain
memory space.
Warning!
Under no circumstances should you attempt to repair
the CD recorder yourself as this will invalidate the
guarantee.
SYMPTOM • possible solution:
No power • ensure that the ON/OFF button is on (red led
on): the CD recorder is in standby mode,
press any key to activate it
Recording is distorted
• make sure the recording level is correct
• ensure that the mains cable is plugged in
correctly
• switch the recorder OFF and then
immediately back ON
20 second pause between recordings
• see Autostart recording
Auto track does not work
Player does not react
• check if auto track on is selected in the menu
• check if there are 2.7 seconds silence in
between the tracks (analog recording only)
• check if the source is a consumer source with
the digital output according to the IEC audio
standard
• switch the ON/OFF button on the front of the
player off and back on
DISC RECOVERon display
• a power failure has occurred during
recording, the CD recorder is attempting to
repair the disc
• source is DVD player (no track information)
• if DISC ERRORthen appears on the
display, the disc cannot be recorded further,
and cannot be finalized. But it can still be
played on the CD recorder or another CD
recorder.
• on a CDRW disc, the track being recorded is
lost, but further recording and finalization can
still be done
No sound • check the audio connections
• if using an amplifier, try using a different
source
Amplifier sound is distorted
• check that the CD recorder analog output is
not connected to the amplifier Phono input
Play will not start
• ensure that the label of the CD is facing up
• clean the disc
• check that the disc is not defective by trying
another disc
Remote control does not work
• point the remote control directly at the CD
recorder
• check the batteries and replace if necessary
• select the right source first
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
28
Download from Www.Somanuals.com. All Manuals Search And Download.
The products and services described herein are not necessarily available in all contries.
The specifications and design of this product are subject of change without notice.
Printed in Hungary.
© PHILIPS 2000
All trademarks acknowledged.
3104 125 2281.2
Download from Www.Somanuals.com. All Manuals Search And Download.
|