xp QRC CDR 800/17 eng.1 02-08-2001 12:55 Pagina 1
Philips Audio CD Recorder CDR 800: Getting started…
PHONO
L
RECORD PLAYER
R
OUT
PHONO
ANALOG
CDR/TAPE
AMPLIFIER/
RECEIVER
L
L
L
R
R
R
IN
IN
OUT
IN
AC MAINS
CD RECORDER
DIGITAL
ANALOG
L
OPTICAL
IN
IN
OUT
OUT
ANALOG
DIGTAL
OUT
DIGITAL COAXIAL SOURCE
(CD player, DVD, DAT)
L
R
OUT
General information
Discs for recording
This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Use discs with the “Digital Audio” logo only:
– CD-Audio Recordable (CDR) discs, or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording would not work properly.
ReWritable
Power
1 Check whether the power voltage as shown on the
type plate corresponds to your local power voltage. If
it does not consult your dealer or service
organization.
Discs for playback
playback standard
CDRW
Philips
in: CD player compatible CDR 800
CD player
disc:
2 After all connections have been made connect
the power cord to AC MAINS ~ and to the wall
outlet.This switches on the AC power supply.
finalized CDR
G
G
G
finalized CDRW
G
G
unfinalized CDR
or CDRW
G
To disconnect the set from the power
completely, remove the power plug from the wall
outlet.
CD Recorder only
MP3 CD
G
Note: MP3 playback works only if the filenames end
with “.mp3”.
Demo mode
The demo mode displays various features of the set and will start automatically.
0
To switch off the demo mode keep STOP
9
pressed for at least 5 seconds.
➜ The demo mode is cancelled permanently.
Download from Www.Somanuals.com. All Manuals Search And Download.
|