Register your product and get support at
BDP7500
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright notice
1 Important
Safety and important notice
Warning
This product
incorporates copyright
protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights
owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorised by Macrovision
Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorised by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• Risk of overheating! Never install the product in a
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
• Never place the product, remote control or batteries
near naked flames or other heat sources, including direct
sunlight.
• Only use this product indoors. Keep this product away
from water, moisture and liquid-filled objects.
• Never place this product on other electrical equipment.
• Keep away from this product during lightning storms.
• Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
Open source software
This BD Player contains open source software.
Philips hereby offers to deliver or make
available, upon request, for a charge no more
than the cost of physically performing source
distribution, a complete machine readable copy
of the corresponding source code on a medium
customarily used for software interchange. This
offer is valid for a period of 3 years after the date of
purchase of this product.
• Visible and invisible laser radiation when open. Avoid
exposure to beam.
Disposal of your old product and
batteries
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
To obtain the source code, write to
Program Manager - Home Video - AVM
620A, Lorong 1,
Innovation Site Singapore
Tao Payoh
Singapore - 319762
When this crossed-out wheeled bin
symbol is attached to a product it means
that the product is covered by the
European Directive 2002/96/EC. Please
inform yourself about the local separate
collection system for electrical and electronic
products.
Trademark notice
HDMI, and HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Windows Media and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other countries.
‘DVD Video’ is a trademark of DVD
Format/Logo Licensing Corporation.
Your product contains batteries
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo
are trademarks.
covered by the European Directive
2006/66/EC, which cannot be
disposed with normal household
waste.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
Manufactured under license under
U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195;
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7,272,567; 7,333,929; 7,212,872 & other U.S. and
worldwide patents issued & pending. DTS is a
registered trademark and the DTS logos, Symbol,
DTS-HD and HTS-HD Master Audio | Essential are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All
Rights Reserved.
2 Your product
Congratulations on your purchase, and welcome to
Philips!To fully benefit from the support that Philips
welcome.
DivX, DivX Ultra
Certified, and
Feature highlights
Philips EasyLink
associated logos are
trademarks of DivX,
Inc. and are used under license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including DivX
® 6) with enhanced playback of DivX® media files
and the DivX® Media Format.
Plays DivX® video with menus, subtitles and audio
tracks.
Your product supports Philips EasyLink, which uses
the HDMI CEC (Consumer Electronics Control)
protocol. EasyLink-compliant devices that are
connected through HDMI connectors can be
controlled by a single remote control.
Note
Java and all other Java trademarks and
logos are trademarks or registered
• Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
trademarks of Sun Microsystems, Inc. in the
United States and/or other countries.
High-Definition entertainment
BONUSVIEW™
Watch high-definition content disc with HDTV
(High Definition Television). Connect it through
a high speed HDMI cable (1.3 or category 2). You
can enjoy excellent picture quality up to 1080p
resolution with the frame rate of 24 frames per
second with progressive scan output.
‘BD LIVE’ and ‘BONUSVIEW’ are
trademarks of Blu-ray Disc
Association.
‘AVCHD’ and ‘AVCHD’ logo are
trademarks of Matsushita Electric
Industrial Co., Ltd and Sony Corporation.
High fidelity 7.1 channel surround sound
This product supports the high-definition audio
such as Dolby Digital Plus, Dolby TrueHD and DTS-
HD Master Audio.
‘x.v.Colour’ is a trademark of Sony
Corporation.
The USB-IF Logos are trademarks
of Universal Serial Bus
Implementers Forum, Inc.
BONUSVIEW/PIP (Picture-in-Picture)
This is a new function of BD-Video that plays the
primary video and secondary video simultaneously.
Blu-ray players with Final Standard Profile or Profile
1.1 specs can play Bonus View features.
CLASS 1
LASER PRODUCT
BD-Live
Connect this product to the movie studios website
via the LAN port to access a variety of up-to-date
content (e.g. refreshed previews and exclusive
special features). You can also enjoy next generation
possibilities, such as ringtone/wallpaper downloads,
peer-to-peer interactions, live events and gaming
activities.
Upscale DVD for enhanced picture quality
Watch the discs in the highest picture quality
available for the HDTV. Video upscaling increases
the resolution of standard definition disc to high
definition up to 1080p over an HDMI connection.
A highly detailed picture and increased sharpness
delivers a more true-to-life picture.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes
You can play discs with the following region codes.
Region code
DVD
Country
BD
Asia Pacific,
Taiwan,
Korea
A
Product overview
Main unit
h
a
Front panel
display
LOADING
UNSUPP
BD
Description
•
•
Turn on this product or switch to
standby mode.
When EasyLink is enabled, press and
hold for at least three seconds to turn all
connected HDMI CEC compliant devices
to standby.
Loading a disc.
The disc is not supported.
Blu-ray disc is recognized.
The HDMI video resolution is
not supported by TV.
Fast forward mode.
HDMI ERR
b
c
Display panel
IR sensor
FASTFWD
FASTBWD
SLOWFWD
SETTINGS
HOME
•
Detect signals from the remote control.
Point the remote control at the IR sensor.
Disc compartment
Fast reverse mode.
Slow forward mode.
Setup menu is displayed.
Home menu is displayed.
Current chapter is in chapter
repeat mode.
Dolby Digital audio is being
played.
Dolby HD audio is being
played.
d
e
•
•
•
•
Open or close the disc compartment.
CHAPTER
f
g
h
Start or resume play.
Pause play.
jack with a sliding door
Slide the door open to connect a USB
flash drive.
DOLBY D
DOLBY HD
UPGRADE
Software upgrade is in
progress.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
supports the BONUSVIEW or Picture-
In-Picture feature).
Remote control
c
TOP MENU
•
•
BD: Display the top menu.
DVD: Display the title menu.
d
e
•
Access the home menu.
DISC MENU / POP-UP MENU
•
•
BD: Access or exit the pop-up menu.
DVD: Access or exit the disc menu.
f
g
h
i
OK
•
Confirm an entry or selection.
Navigate through the menus.
•
•
BACK
Return to a previous display menu.
/
•
Skip to the previous or next title, chapter,
or track.
j
k
/
•
•
Search backward or forward.
Mute volume (applicable only to certain
Philips brand TVs).
l
TV VOL +/-
Adjust volume (applicable only to certain
Philips brand TVs).
•
m
n
SUBTITLE
•
Select a subtitle language on a disc.
AUDIO
•
Select an audio language or channel on
a disc.
o
p
q
Alphanumeric buttons
•
Select an item to play.
•
Open or close the disc compartment.
TV CH +/-
•
Select a TV channel (applicable only to
certain Philips brand TVs).
a
•
•
Turn on this product or switch to
standby mode.
r
s
When EasyLink is enabled, press and
hold for at least three seconds to turn all
connected HDMI CEC compliant devices
to standby.
•
Stop play.
•
•
Pause play.
Move the paused picture one step
forward.
b
BONUSVIEW
•
Turn on or off the secondary video
t
in a small screen window during play
(applicable only to a Blu-ray disc that
•
Start or resume play.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
u
v
INFO
Display the current status or the disc
information.
OPTIONS
Access options for the current activity or
selection.
Connect video/audio cables
•
Connect this product toTV to view disc play.
Select the best video connection that theTV can
support.
•
•
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan
TV).
Option 3: Connect to the composite video
jack (for a standard TV).
w
x
Color buttons
•
•
BD: Select tasks or options.
HDMI
•
•
Select the video resolution of HDMI
output.
REPEAT
Select repeat play or random play.
y
Note
•
• You must connect this product directly to a TV.
3 Connect
Option 1: Connect to the HDMI jack
Make the following connections to use this product.
Basic connections:
•
•
•
Video
Audio
Power
Optional connections:
•
Route audio to other devices
•
•
•
Multi-channel receiver
Digital amplifier/receiver
Analog stereo system
HDMI IN
•
•
USB device
LAN (network)
1
Connect the supplied HDMI cable to:
•
•
the HDMI jack on this product.
Note
the HDMI input jack on the TV.
• Refer to the type plate at the back or bottom of the
product for identification and supply ratings.
Tip
• Before you make or change any connections, ensure that
all devices are disconnected from the power outlet.
• Different types of connectors can be used to connect
this product, depending on availability and your needs.
A comprehensive interactive guide to help you connect
philips.com.
• If the TV has a DVI connector only, connect via an
HDMI/DVI adaptor. Connect an audio cable for sound
output.
• You can optimize the video output. Press the HDMI
button repeatedly to select the best resolution the TV
can support.
• Philips recommends HDMI category 2 cable, also known
as High Speed HDMI cable, for optimal video and audio
output.
• To play the digital video images of a BD-video or DVD-
video via an HDMI connection, it is necessary that both
this product and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection
system).
• This type of connection provides best picture quality.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Connect to the component
video jack
1
2
Connect a composite video cable to:
•
•
the VIDEO jack on this product.
the VIDEO input jack on the TV.
Connect the audio cables to:
Y
Pb
Pr
•
the AUDIO L/R-LINE OUT jacks on this
product.
the AUDIO input jacks on the TV.
AUDIO IN
•
Tip
• The video input jack on the TV might be labeled as A/V
IN, VIDEO IN, COMPOSITE or BASEBAND.
• This type of connection provides standard picture
quality.
Route audio to other devices
To enhance audio play, you can route the audio from
this product to other devices.
Connect to multi-channel receiver
1
2
Connect the component video cables (not
supplied) to:
•
•
the Y Pb/Cb Pr/Cr jacks on this product.
the COMPONENT VIDEO input jacks
on the TV.
Connect the audio cables to:
•
the AUDIO L/R-LINE OUT jacks on this
product.
the AUDIO input jacks on the TV.
•
Tip
• The component video input jack on the TV might be
labeled as Y Pb Pr or YUV.
• This type of connection provides good picture quality.
7.1 CH AUDIO OUT
Option 3: Connect to the composite
video jack
1
Connect the 7.1-channel audio cables (not
supplied) to:
AUDIO IN
•
the 7.1 CH AUDIO OUT jacks on this
product.
VIDEO IN
•
the corresponding AUDIO input jacks
on the device.
Tip
• You can optimize the speaker output (see “Adjust
settings” > [Audio Setup] > [Speaker Setup]).
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to digital amplifier/receiver
1
Connect the audio cables to:
•
the AUDIO L/R-LINE OUT jacks on this
product.
Connect to coaxial jack
•
the AUDIO input jacks on the device.
Connect USB device
COAXIAL
COAXIAL
1
Connect a USB device to the
on this product.
(USB) jack
1
Connect a coaxial cable (not supplied) to:
•
•
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
Note
• This product can only play/view MP3, WMA/WMV9,
DivX (Ultra) or JPEG files that are stored on such
devices.
Connect to optical jack
• Press , select [USB] in the menu to access the content
and play the files.
• Connect a USB device only to the
jack on this
product.
• Philips does not guarantee 100% compatibility with all
USB devices.
OPTICAL
Connect network
Connect this product to the network to enjoy
software updates and BD-Live bonus content.
OPTICAL
1
Connect an optical cable (not supplied) to:
•
•
the OPTICAL jack on this product.
the OPTICAL/DIGITAL input jack on the
device.
Connect analogue stereo system
AUDIO IN
1
Connect the network cable (not supplied) to:
•
•
the LAN jack on this product.
the LAN jack on the broadband modem
or router.
Note
• Internet access to Philips website for software update
may not be allowed, depending on the router you use
or the Internet Service Provider’s policy. Contact your
Internet Service Provider for more information.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
Close the battery compartment.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Note
• If you are not going to use the remote control for a long
time, remove the batteries.
• Before connecting the AC power cord, ensure you have
completed all other connections.
• Do not use old and new or different types of batteries
in combination.
• Batteries contain chemical substances, so they should be
disposed of properly.
Note
• The type plate is located on the back of the product.
• You may experience tingling feel upon touching the metal
case of this product. This tingling feel is common for
products with aluminum finishing. It does not cause any
harm as consumer safety is not compromised.
Find the correct viewing channel
1
2
Press to turn on this product.
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
1
Connect the AC power cable to:
•
this product.
•
the wall socket.
Use the Home menu
»
This product is ready to be set up for use.
4 Get started
Settings
Play Disc
USB
1
Press
.
Caution
•
•
•
To start disc play, select [Play Disc].
To view the USB contents, select [USB].
To access the setup menus, select
[Settings].
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Navigate the menu
1
When a menu is displayed, press the buttons
on the remote control to navigate.
Prepare the remote control
Caution
Button
Action
Move up or down.
Move left or right.
Confirm a selection.
Enter numbers.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
OK
1
Open the battery compartment.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Once connected, an IP address is obtained
automatically.
Select menu display language
•
If no IP address is obtained, select
[Retry] and press OK to try to obtain
the IP address again.
Note
• If this product is connected to a HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
Select [Finish] in the menu, then press OK to
exit.
Note
1
In the Home menu, select [Settings] and press
OK.
• This product does not support automatic detection of an
Ethernet crossover cable.
• Loading BD-Live content from the internet may take
some time, depending on the file size and the speed of
the internet connection.
2
3
Select [Preference Setup], then press .
Select [Menu Language], then press
.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
• To enable the EasyLink feature, you must turn on the
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
•
The language options may vary from
different regions.
to select a language, then press OK.
4
Press
Setup network
One-touch play
To enjoy software updates of this product and BD-
Live bonus contents for certain Blu-ray discs, set up
the network connection.
1
Press the STANDBY button to turn on this
product.
»
TheTV (if supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
Note
»
If a disc is loaded in this product, disc play
automatically starts.
• Ensure that the network cable is properly connected and
the router is switched on.
One-touch standby
1
2
Connect this product to the broadband
modem or router.
In the Home menu, select [Settings] and press
OK.
1
Press and hold the STANDBY button for
more than 3 seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
3
4
5
Select [Advanced Setup], then press
.
Select [Network], then press OK.
Select [Next] in the menu, then press OK.
Note
»
»
This product starts to detect if there is a
connection to the network.
If the connection test fails, select [Retry]
and press OK to re-connect again to the
network.
• Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play video
Control video play
5 Play
Play a disc
Caution
1
Play a title.
2
Use the remote control to control the play.
Button
Action
Pause play.
Start or resume play.
Stop play.
Skip to a previous/next title
or chapter.
Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
• Do not place any objects other than discs into the disc
compartment.
• Do not touch the disc optical lens inside the disc
compartment.
1
2
3
Press to open the disc compartment.
Insert a disc with its label facing up.
Press to close the disc compartment and
start disc play.
/
/
•
•
To view disc play, turn on the TV to the
correct viewing channel for this product.
•
In pause mode, slow
a play backward or
forward.
To stop disc play, press
.
Note
Note
• Check the types of discs supported (see “Specifications”
> “Play media”).
• If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preference Setup” >
[Parental Control]).
• If you pause or stop a disc, the screen saver appears after
10 minutes of inactivity. To deactivate the screen saver,
press any button.
• After you pause or stop a disc and no button is pressed
within 30 minutes, this product automatically switches
to standby.
•
For BD disc with Java application, the resume function
is not available.
Change video play
1
Play a title.
2
Use the remote control to change the play.
Button
AUDIO
Action
Select an audio language or
channel on a disc.
Select the subtitle language on
a disc.
Select or turn off repeat or
shuffle mode.
Disc content structure
The structure of a disc content is generally divided
as shown below.
SUBTITLE
REPEAT
BD-video, DVD-video
title 1
chapter 1 chapter 2
title 2
•
Repeat options may vary
from the disc type.
For VCDs, repeat play is
only possible when the
PBC mode is turned off.
chapter 1 chapter 2 chapter 3
Audio CD
track 3
•
track 1
track 2
track 4
track 5
file 3
MP3, Windows Media™ Audio, JPEG
Display the current status or
disc information.
INFO
folder (group) 1
file 1 file 2
folder (group)
file 2
2
file 1
Access options relating to the
current activity or selection.
OPTIONS
BONUSVIEW
•
•
•
[title/chapter] (title/chapter) refers to the
contents on a BD/DVD.
Turn on or off the secondary
video in a small screen window
during play (applicable only to
BD-video that supports the
BONUSVIEW or Picture-In-
Picture feature).
[track] (track) refers to the contents on an
audio CD.
[folder/file] (folder/file) refers to the contents
on a disc in MP3/WMA/JPEG format.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom in/out
Note
1
During play, press
OPTIONS.
• Some operations may not work with some discs. See the
information accompanying the disc for details.
»
The play options menu is displayed.
2
3
Select [Zoom] in the menu, then press OK.
Press the Navigation buttons ( )to select a
zoom factor, then press OK.
Display menu
4
Press the Navigation buttons to pan through
the zoomed picture.
•
To cancel zoom mode, press
BACK
or OK to display the zoom factor bar,
then press the Navigation buttons (
until the zoom factor [x1] is selected.
)
Repeat play for a specific section
BD-video disc
1
2
3
During play, press
OPTIONS.
•
TOP MENU stop the video play and shows
the disc menu. This feature is disc-dependent.
POP-UP MENU access to the BD-video disc
menu without interrupting disc play.
»
The play options menu is displayed.
Select [Repeat A-B] in the menu, then press
OK to set the starting point.
Forward the video play, then press OK to set
the ending point.
»
•
DVD-video disc
•
•
TOP MENU display the root menu of a disc.
Repeat play starts.
DISC MENU display disc information and
guide you through the available functions in
the disc.
•
To cancel repeat play mode, press
OPTIONS, select [Repeat A-B] and
press OK.
VCD/SVCD/DivX disc:
•
DISC MENU display the content of the disc.
Note
Tip
• The marked section for repeat play is only possible
within a track/title.
• If the PBC setting is off, the VCD/SVCD skips the
menu and starts play from the first title. To display the
menu before play, turn on the PBC setting (see “Adjust
settings” > [Preference Setup] > [VCD PBC]).
View video play from different camera
angles
1
During play, press
OPTIONS.
Select title/chapter
»
The play options menu is displayed.
1
2
3
During play, press
OPTIONS.
2
3
Select [Angle List] in the menu then press
.
»
The play options menu is displayed.
Select an angle option, then press OK.
Select [Title] or [Chapter] in the menu, then
»
Play changes to the selected angle.
press OK.
Select the title or chapter number, then press
Note
OK.
• Applicable only to discs that contain multi-angle scenes.
Skip play to a specific time
1
2
3
During play, press
OPTIONS.
Shift subtitle display
This feature is only available if you have set the [TV
Display] to [Cinema 21:9] (see ‘Adjust settings’ >
‘Video Setup’).
»
The play options menu is displayed.
Select [Time Search] in the menu, then press
OK.
Press the Navigation buttons (
the time to skip to, then press OK.
) to change
1
During play, press
.
OPTIONS
ꢀ
The play options menu is displayed.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Select [Subtitle Language] > [Shift Subtitle] in
3
4
Select [2nd Audio Language] or [2nd Subtitle
Language] in the menu, then press
Select the language to play, then press OK.
the menu, then press 2.
.
Press the Navigation buttons (3 4) to shift
the subtitle, then press OK.
Enjoy BD-LIVE
(Applicable only to a disc that enables BD-Live
bonus content.)
Tip
Additional contents (such as movie trailers,
subtitles, etc.,) can be downloaded to this product’s
local storage or a connected USB storage device.
Special video data may be played while they are
being downloaded.
When the disc supporting BD-Live is played, this
product or disc’s ID can be sent to the content
provider via the internet. Services and functions to
be provided vary from discs.
• You can press SUBTITLE on the remote control to
access Shift Subtitle feature.
• Subtitle Shift is not supported for DivX video with
external subtitles.
• Subtitle Shift setting will be not retained after disc is
removed.
Play BD-video
Blu-ray video disc has a larger capacity and supports
features such as high-definition videos, multi-
channel surround sounds, interactive menus and
so on.
Play DivX® video
DivX video is a digital media format that retains high
quality despite a high rate of compression. You can
enjoy DivX video on this DivX certified product.
1
2
3
Insert a BD-video disc.
Press , select [Play Disc] then press OK.
Play automatically starts, or select a play
option in the menu and press OK.
1
Insert a disc or USB that contains the DivX
videos.
2
Press , select [Play Disc] or [USB], then
•
During play, you can press TOP MENU
to display additional information, features
or content stored in the disc.
During play, you can press POP-UP
MENU to display the disc menu without
interrupting disc play.
press OK.
»
A contents menu is displayed.
3
4
5
Select a video folder, then press OK.
Select a title to play, then press OK.
Use the remote control to control the play.
•
Enjoy BONUSVIEW
Button
AUDIO
Action
(Applicable only to a disc compatible with the
BONUSVIEW or Picture-in-Picture feature)
You can instantly view additional content (such as
commentaries) in a small screen window.
Select an audio language or
channel.
Select a subtitle language.
Stop play.
SUBTITLE
Note
• You can only play DivX videos that were rented or
purchased with the DivX registration code of this
product (see “Adjust Settings” > [Advanced Setup] >
[DivX® VOD Code]).
• You can play DivX video files of up to 4GB.
• This product can display up to 45 characters in the
subtitle.
A Primary video
B Secondary video
1
2
Press BONUSVIEW to turn on the secondary
video window.
Press
OPTIONS.
»
The play options menu is displayed.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Play music
Control a track
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or .jpg
extensions).
1
Play a track.
Use the remote control to control the play.
2
1
Insert a disc or USB that contains the JPEG
photos.
Button
Action
2
Press , select [Play Disc] or [USB], then
Pause play.
Start or resume play.
Stop play.
Skip to a previous/next track.
Select an item to play.
press OK.
»
A contents menu is displayed.
3
4
Select a photo folder, then press OK to enter.
/
•
To select a photo, press the Navigation
buttons.
To enlarge the selected photo and start
slideshow, press OK.
•
Press OK to start slideshow play.
Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
Select or turn off repeat or
shuffle mode.
/
Note
• It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc.
REPEAT
• This product can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Play MP3/WMA music
MP3/WMA is a type of highly compressed audio file
(files with .mp3, .wma extensions).
• Folders/files that exceed the supported limit of this
product cannot be displayed or played.
1
Insert a disc or USB that contains the MP3/
WMA music.
Control photo play
2
Press , select [Play Disc] or [USB], then
1
Play a photo slideshow.
press OK.
2
Use the remote control to control the play.
»
A contents menu is displayed.
3
4
Select a music folder, then press OK.
Button
/
Action
Rotate a photo anti-
clockwise/clockwise.
Flip a photo horizontally/
vertically.
Stop play.
Select a file to play, then press OK.
•
To return to the main menu, press
BACK.
/
Note
• For disc recorded in multiple sessions, only the first
session is played.
• For a WMA file that is protected by Digital Rights
Management (DRM), it cannot be played on this product.
• This product does not support MP3PRO audio format.
• For any special character that is present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Note
• Some operations may not work with some discs or files.
Set slideshow interval and animation
• Folders/files that exceed the supported limit of this
product cannot be displayed or played.
1
During play, press
OPTIONS.
»
The play options menu is displayed.
2
Select [Duration per slide] in the menu, then
press OK.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select a duration, then press OK.
Select [Slide Animation] in the menu, then
press OK.
Select a type of animation effect, then press
OK.
Note
• If the device does not fit into the USB jack, connect it
through a USB extension cable.
5
• NTFS (New Technology File System) data format is not
supported.
• Philips does not guarantee 100% compatibility with all
USB devices.
Play musical slideshow
Create a musical slideshow to play simultaneously
MP3/WMA music files and JPEG photo files.
6 Adjust settings
Note
• To create a musical slideshow, you must store the MP3/
WMA and JPEG files on the same disc or USB device.
Note
• If the setup option is grayed out, it means the setting
cannot be changed at the current state.
1
2
3
Play MP3/WMA music.
Press
BACK to return to the main menu.
Navigate to enter a photo folder, then press
OK to start slideshow play.
Video setup
»
Slideshow begins and continues till the end
of the photo folder.
1
2
3
Press
.
Select [Settings], then press OK.
Select [Video Setup], then press
»
Audio continues to play until the end of
the disc.
.
•
•
To stop the slideshow play, press
To stop the music play, press again.
.
Play from USB device
Play or view MP3,WMA/WMV, DivX (Ultra) or JPEG
files on the following USB devices:
•
•
•
flash drive
memory card reader
HDD (external power source needed)
4
5
Select an option, then press OK.
Select a setting, then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
.
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
1
2
Connect a USB device to the
(USB) jack.
[Disc Menu]
Select a language for disc menu.
Press , select [USB], then press OK.
»
A contents menu is displayed.
3
Select a file to play, then press OK.
Note
»
Play starts (see “Play music”,“Play photo”,
“Play video” for details).
• If the language you have set is not available on the disc,
the disc uses its own default language.
•
To stop play, press or remove the USB
device.
• For some discs, the subtitle/audio language can only be
changed from the disc menu.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
[TV Display]
Select a display format:
Note
• If the setting is not compatible with your TV, a blank
screen appears. Wait for 10 seconds for auto recovery,
or press repeatedly the HDMI button until the picture
appears.
[HDMI Deep Color]
This feature is available only when the display
device is connected by an HDMI cable, and when it
supports deep color feature.
•
[Auto] - Enjoy vivid images in over a billion
colors on Deep Color enabled TV.
[Off] - Output standard 8 bit color.
•
[4:3 Letterbox] – For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[Component Video]
Select a component video output resolution that is
compatible with the TV display capability.
•
•
•
[4:3 Panscan] – For 4:3 screen TV: full-height
display with the trimmed sides.
•
[480i/576i], [480p/576p], [720p], [1080i] -
Select a video resolution setting that is best
supported by the TV. See the TV manual for
details.
[16:9 Widescreen] – For wide-screen TV:
display ratio 16:9.
[16:9] – For 16:9 screen TV: display picture at
ratio 4:3 for a disc with 4:3 ratio, with black
bars on the left and right side of the screen.
[Cinema 21:9] – For wide-screen TV of display
ratio 21:9, remove black bars at the bottom
and top of the screen.
•
Note
• If the setting is not compatible with the TV, a blank
screen appears. Wait for 10 seconds for auto recovery.
• Copy protected DVDs can only output 480p/576p or
480i/576i resolution.
Note
• If [4:3 Panscan] you have selected is not supported
by the disc, the screen displays in the [4:3 Letterbox]
format.
[Picture Settings]
Select a predefined set of picture color settings.
• Help text display is available in all modes, except
•
•
•
•
[Standard] – Original color setting.
[Vivid] – Vibrant color setting.
[Cool] - Soft color setting.
[Action] – Sharp color setting. It enhances
the details in the dark area. Ideal for action
movies.
[Cinema 21:9].
• Subtitle Shift function is enabled only in [Cinema 21:9]
mode.
• For optimum viewing with Philips Cinema 21:9 TV, refer
to the TV’s user manual.
•
[Animation] – Contrast color setting. Ideal for
animated pictures.
[HDMI Video]
Select a HDMI video output resolution that is
compatible with your TV display capability.
[Black Level]
Improve black color contrast.
•
[Auto] - Detect and select the best supported
video resolution automatically.
[Native] - Set to original video resolution.
[480i/576i], [480p/576p], [720p], [1080i],
[1080p], [1080p/24Hz] - Select a video
resolution setting that is best supported by the
TV. See the TV manual for details.
•
•
[Normal] - Standard black level.
[Enhanced] - Enhance black level.
•
•
Audio Setup
1
2
3
Press
.
Select [Settings], then press OK.
Select [Audio Setup], then press
.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• Ensure that the audio format is supported by the disc
and the connected audio device (amplifier/receiver).
• When [Bitstream] is selected, interactive audio like
button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output from
the DIGITAL OUT jack (coaxial/optical).
•
•
[On] - PCM audio is down-sampled at 48kHz.
[Off] - For BD or DVD recorded in LPCM
without copyright protection, two-channel
audio signals up to 96 kHz are output as LPCM
signals with no conversion.
4
5
Select an option, then press OK.
Select a setting, then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
.
[Speaker Setup]
Optimize the surround output for the connected
speaker system.
•
•
[Night Mode]
Make a loud sound level softer and a soft sound
level louder to play the disc at a low volume,
without disturbing other persons.
[Speaker Setup]
Activate the test tone for the speakers and the
subwoofer.
•
[Auto] - Applicable to tracks with Dolby True
HD audio.
[On] – For quiet viewing at night.
[Off] – For surround sound with a full dynamic
range.
[Speaker Distance]
Set the delay time for the speakers and the
subwoofer if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position at
the same time.
•
•
Note
•
•
[Speaker Volume]
Set the volume level of the speakes and the
subwoofer to get the ideal audio balance.
[Speaker Size]
• Applicable only to Dolby encoded DVD-video or BD-
video.
•
Set the speaker size for the speakers and
the subwoofer.
Select [Large] size for speakers that can
produce low frequency signal below 120
Hz.
Select [No Speaker] if there is no
speaker connected.
If the front speakers are set to [Small],
subwoofer setting is [On] and it cannot
be changed.
If the subwoofer is set to [Off], the
front speakers settings are [Large] and it
cannot be changed.
[HDMI Audio]
Select an HDMI audio output when you connect
this product and the TV/audio device with an HDMI
cable.
•
•
[Bitstream] – Select the best original HD
audio experience (only via an HD audio
compatible receiver).
[Auto] – Detect and select the best supported
audio format automatically.
•
•
•
[Digital Audio]
•
Select an audio format for the sound output from
the DIGITAL OUT jack (coaxial/optical).
•
[Auto] - Detect and select the best supported
audio format automatically.
[PCM] - The audio device does not support
multi-channel format. Audio is downmixed to
two-channel sound.
[Bitstream] - Select the original audio to
experience Dolby or DTS audio (BD-video
special sound effect is disabled).
Tip
•
• The test tone is emitted from the speaker while adjusting
the volume level.
• Allow 1ms setting for every 30cm distance between the
•
speaker and the listening position.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
Preference Setup
1
2
3
Press
.
Select [Settings], then press OK.
Select [Preference Setup], then press .
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you forget
the password, enter ‘0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
•
•
[Normal] - Normal brightness.
4
5
Select an option, then press OK.
Select a setting, then press OK.
[Dim] - To dim display.
[Auto Standby]
•
To return to the previous menu, press
Turn on or off auto standby mode. It is an energy
saving feature.
BACK.
•
To exit the menu, press
.
•
[On] - Switch to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
[Menu Language]
Select an on-screen menu language.
•
[Off] - Disable auto standby mode.
Note
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
• If this product is connected to an HDMI CEC compliant
TV using a HDMI cable, it switches automatically to the
same menu display language as per your TV setting (if the
language set on TV is supported by this product).
•
[On] - Display the index menu when you load
a disc for play.
[Off] - Skip the menu and start play from the
first title.
•
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
EasyLink Setup
1
2
3
Press
.
To access, enter your last set password or ‘0000’.
Select [Settings], then press OK.
Select [EasyLink Setup], then press .
Note
• Rated discs above the level you set in [Parental Control]
require a password to be played.
• The ratings are country-dependent. To allow all discs to
play, select ‘8’ for DVD-video and BD-Video.
• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
4
5
Select an option, then press OK.
Select a setting, then press OK.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
To return to the previous menu, press
4
5
Select an option, then press OK.
Select a setting, then press OK.
BACK.
•
To exit the menu, press
.
•
To return to the previous menu, press
BACK.
[EasyLink]
•
To exit the menu, press
.
This product supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
[BD-Live Security]
You can restrict internet access for BD-Live bonus
contents which are available to certain Blu-ray discs.
•
[On] - Internet access is prohibited for all BD-
Live contents.
[Off]- Internet access is permitted for all BD-
Live contents.
•
•
[On] - Turn on EasyLink features.
[Off] - Disable EasyLink features.
•
[One Touch Play]
When you press the STANDBY button to turn
on this product, the TV (if the TV supports one-
touch play) automatically turns on and switches to
the video-in channel. Disc play starts if there is a
disc in this product.
[Network]
Set up a connection to internet to download
updated software and access BD-Live bonus
contents. It guides you through a step-by-step
network installation procedure.
•
•
[On] - Turn on one-touch play feature.
[Off] - Disable one-touch play feature.
Note
[One Touch Standby]
• For detailed network setup, see “Get started” > “Set up
network”.
When you press and hold the STANDBY button,
all the connected HDMI CEC devices (if the device
supports one-touch standby) switch to standby
mode simultaneously.
[Software Download]
Update the software of this product (if a latest
version is available on Philips website) to enhance
the playability of this product.
•
•
[On] - Turn on one-touch standby feature.
[Off] - Disable one-touch standby feature.
•
[USB] - Download software from the USB
device which is connected to this product.
[Network] - Download software from
network.
Note
• You must turn on the HDMI CEC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
•
• Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
Note
• For detailed software updating, see “Additional
information” > “Update software”.
Advanced Setup
1
2
3
Press
.
[Clear Memory]
Note
Select [Settings], then press OK.
Select [Advanced Setup], then press
.
• When you clear the local storage, previous download of
BD-Live bonus contents is no longer available.
If the internal memory of this product is not enough
to download BD-Live bonus contents for a BD disc,
reformat the local storage to clear all the contents.
Note
• You can use a USB device as an external storage to store
the downloaded files.
• Local storage is a folder (BUDA) located on the
connected USB device.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
[DivX® VOD Code]
Update software via USB
Display the DivX® registration code.
1
the latest software version is available for this
product.
Tip
2
3
4
Download the software onto a USB flash
• Use this product’s DivX registration code when you rent
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
drive.
Insert a USB flash drive to the
on this product.
(USB) jack
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
[Version Info.]
Display the software version and the MAC address
of this product.
5
6
Follow the instructions on the TV screen to
confirm update operation.
»
Once software update is complete, this
product automatically turns off to standby.
Tip
• This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this product.
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Note
[Restore Default Settings]
Reset all the settings of this product to the factory
settings, except for [Parental Control] setting.
• Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this product.
7 Additional Information
Care
Update software
Caution
For software updates to enchance performance,
check the current software version of this product to
compare with the latest software (if available) at the
Philips website.
• Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
1
2
3
Press
.
Clean discs
Select [Settings], then press OK.
Select [Advanced Setup] > [Version Info.],
then press OK.
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Update software via network
Specifications
1
Set up the network connection (see “Get
started’ > “Set up network”).
Note
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
• Specification and design are subject to change without
notice
»
You are prompted to start upgrading
processs if upgrade media is detected.
Play media
•
BD-Video, DVD-Video, DVD+R/+RW, DVD-
R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio
CD, Video CD/SVCD, Picture CD, MP3-CD,
WMA-CD, DivX (Ultra)-CD, USB flash drive.
3
4
Follow the instructions on the TV screen to
confirm update operation.
»
Once software update is complete, this
product automatically turns off to standby.
Accessories supplied
Disconnect the power cord for a few seconds
and connect again to turn on this product.
•
•
•
Remote control and batteries
Audio/Video cables
Power cable
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
HDMI category 2 cable
Quick start guide
User manual
•
•
Wave length:
•
•
•
BD: 405 +5nm/-5nm
DVD: 650 +13nm/-10nm
CD: 790 +15nm/-15nm
Video
Output power:
•
•
•
Signal system: PAL / NTSC
•
•
•
BD: Max. ratings: 20mW
Composite video output: 1 Vp-p (75 ohm)
Component video output: 480/576i, 480/576p,
720p, 1080i
DVD: Max. ratings: 7mW
CD: Max. ratings: 7mW
•
•
•
Y: 1 Vp-p (75 ohm)
Pb: 0.7 V-pp (75 ohm)
Pr: 0.7 V-pp (75 ohm)
8 Troubleshooting
•
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Warning
Audio
• Risk of electric shock. Never remove the casing of the
product.
•
2 Channel analog output
Audio Front L + R : 2 Vrms (> 1 kohm)
•
•
7.1 Channel analog output
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the model
and serial number of your product.The model
number and serial number are on the back of your
product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
•
•
Audio Front L + R : 2 Vrms (> 1 kohm)
Audio Surrond L + R : 2 Vrms (> 1
kohm)
Audio Center : 2 Vrms (> 1 kohm)
Audio Subwoofer : 1.15 Vrms (> 1 kohm)
Audio Rear L + R: 2 Vrms (> 1 kohm)
•
•
•
•
Digital output: 0.5 Vp-p (75 ohm)
•
Optical, Coaxial
•
•
HDMI output
Sampling frequency:
•
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
•
Constant bit rate:
Main unit
No reaction to the remote control.
•
•
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
•
•
Connect this product to the power outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
•
•
Insert new batteries in the remote control.
Main unit
•
Power supply rating
Picture
No picture.
•
•
•
•
•
Europe: 220~240V ~AC, ~50 Hz
Russia: 220~230V ~AC, ~50 Hz
Asia Pacific: 110~240V ~AC, 50~60 Hz
Latin America: 110~240V ~AC, 50~60 Hz
China: 110~240V ~AC, ~50 Hz
•
See TV manual for correct video input channel
selection. Change the TV channel until you see
the Philips screen.
•
•
•
Power consumption: 22 W
Power consumption in standby mode: 0.25 W
Dimensions (w x h x d): 435 x 55.7 x 245
(mm)
No picture on HDMI connection.
•
If this product is connected to an unauthorized
display device with an HDMI cable, the audio/
video signal may not be output.
•
Net Weight: 2.4 kg
•
•
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
Laser Specification
Laser Type:
If this happens when you change the [HDMI
Video] setting, press HDMI on the remote
control repeatedly until picture appears.
•
•
•
•
BD Laser Diode: InGaN/AIGaN
DVD Laser Diode: InGaAIP
CD Laser Diode: A IGaAs
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
No high-definition video signal on the TV.
Data files (JPEG, MP3, WMA) cannot be played
or read.
•
Make sure that the disc contains high-
definition video.
•
Ensure that the data file was recorded in the
UDF, ISO9660 or JOLIET format.
Ensure that the selected group (folder) does
not contain more than 9,999 files for DVD,
and 999 files for CD.
•
Make sure that the TV supports high-
definition video.
•
Sound
•
•
Ensure that the JPEG file extension is.jpg, .JPG,
.jpeg or .JPEG.
No audio output from the TV.
•
•
Ensure that the audio cables are connected to
the audio input of the TV.
Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
Ensure that the MP3/WMA file extension
is .mp3 or .MP3, and .wma or .WMA for
windows Media™ Audio.
DivX video files cannot be played.
•
•
Ensure that the DivX video file is complete.
Ensure that the file name extension is correct.
No audio output from the loudspeakers of the
audio device (home theater /amplifier/receiver).
•
Ensure that the audio cables are connected to
the audio input of the audio device.
Turn on the audio device to its correct audio
input source.
The contents of the USB flash drive cannot be read.
•
The USB flash drive format is not compatible
with this product.
•
•
Drive is formatted with different file system
which is not supported by this product (e.g.
NTFS).
No 7.1 - channel audio from the loudspeaker of
the audio system.
•
Maximum size of memory supported is
160GB.
•
•
•
Ensure that the disc contains 7.1 - channel
audio.
Ensure that the audio device supports 7.1 -
channel audio.
‘No entry’ sign appears on the TV.
The operation is not possible.
•
Ensure that the audio format is supported
by the disc and the connected audio device
(amplifier/receiver).
EasyLink feature does not work.
•
Ensure that this product is connected to the
Philips brand EasyLink TV and the [EasyLink]
in the menu is set to [On].
No sound on HDMI connection.
•
You may not hear any sound from the HDMI
output if the connected device is non-HDCP
compliant or only DVI-compatible.
Unable to access BD-Live feature.
•
•
•
Check the network connection or ensure that
the network has been set up.
Clear local storage, internal memory (if any)
or USB.
Ensure that the BD disc supports BD Live
feature.
No secondary audio output for Picture-in-Picture
feature.
•
When [Bitstream] under the [HDMI Audio]
or [Digital Audio] menu is selected, interactive
sound like secondary sound for Picture-in-
Picture feature is muted. Deselect [Bitstream].
Play
Disc cannot be played.
•
•
Ensure that the disc is correctly loaded.
Ensure that this product supports the disc. See
‘Specifications’.
•
•
•
Ensure that this product supports the region
code of the DVD or BD.
For DVD RW or DVD R, ensure that the
disc is finalized.
Clean the disc.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Digital
9 Glossary
A surround sound system developed by Dolby
Laboratories that contains up to six channels of
digital audio (front left and right, surround left and
right, center and subwoofer.)
A
Aspect ratio
DTS
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
the ratio of a high-definition or wide TV is 16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
Digital Theatre Systems. A surround sound system
for providing 5.1 channels of discrete digital audio
in consumer electronics products and software
content. It is not developed by Dolby Digital.
AVCHD
H
AVCHD is a new format (standard) for high
definition video cameras that can be used to record
and play high-resolution HD images.
HDCP
High-bandwidth Digital Content Protection. This is
a specification that provides a secure transmission
of digital contents between different devices (to
prevent unauthorized copyright.)
B
Blu-ray Disc (BD)
HDMI
Blu-ray Disc is a next generation optical video
disc capable of storing five times more data than
a conventional DVD. The large capacity makes it
possible to benefit from the features such as high-
definition videos, multichannel surround sound,
interactive menus and so on.
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality picture
and sound quality, completely free from noise.
HDMI is fully backward-compatible with DVI.
As required by the HDMI standard, connecting to
HDMI or DVI products without HDCP (High-
bandwidth Digital Content Protection) will result in
no Video or Audio output.
BONUSVIEW
This is a BD-Video (Final Standard Profile or Profile
1.1) that supports interactive content encoded on
the disc, such as picture-in-picture. This means you
can play the primary video and secondary video
simultaneously.
J
JPEG
D
A very common digital still picture format. A still-
picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
Digital Audio
Digital Audio is a sound signal that has been
converted into numerical values. Digital sound
can be transmitted through multiple channels.
Analogue sound can only be transmitted through
two channels.
L
DivX Video-On-Demand
This DivX Certified ® device must be registered
in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX
video.
LAN (Local Area Network)
A group of linked devices in a company, school
or home. Indicates the boundaries of a particular
network.
Local storage
This storage area is used as destination for storing
additional contents from BD-Live enabled BD-
Video.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
P
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
PCM
Pulse Code Modulation. A digital audio encoding
system.
R
Region code
A system that allows discs to be played only in the
region designated. This unit only plays discs that
have compatible region codes. You can find the
region code of your unit on the product label. Some
discs are compatible with more than one region (or
ALL regions.)
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
by their file extension ‘.wma.’
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Source Software
This product contains the following open source software packages, which are subject to their respective licenses.
1.
Zlib general purpose compression library
/* zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held
liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to
alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original
software. If you use this software in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the
original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
2.
Freetype, a Free, High-Quality, and Portable Font Engine
The software is based in part of the work of the FreeTypeTeam.
Portions of the relevant license conditions are copied below.
The FreeType Project LICENSE
2006-Jan-27
Copyright 1996-2002, 2006 by DavidTurner, Robert Wilhelm, and Werner Lemberg
1. NoWarranty
THE FREETYPE PROJECT IS PROVIDED `AS IS’WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OFTHE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BYTHE USE ORTHE INABILITYTO USE, OFTHE
FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute,
perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in
both source and object code forms) and derivative works thereof for any purpose; and to authorize others to
exercise some or all of the rights granted herein, subject to the following conditions:
• Redistribution in binary form must provide a disclaimer that states that the software is based in part of the
work of the FreeTypeTeam, in the distribution documentation. We also encourage you to put an URL to
the FreeType web page in your documentation, though this isn’t mandatory.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
IJG: JPEG software decoder
This software is based in part on the work of the Independent JPEG Group. See http://www.ijg.org/, and in
particular http://picasa.google.com/about/ijg.txt. Portions of the relevant license conditions are copied below.
The authors make NO WARRANTY or representation, either express or implied, with respect to this software,
its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and
you, its user, assume the entire risk as to its quality and accuracy.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any
purpose, without fee, subject to these conditions:
(2) If only executable code is distributed, then the accompanying documentation must state that “this software
is based in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable
consequences; the authors accept NO LIABILITY for damages of any kind.
4.
OpenSSL.
Open SSL is an Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) andTransport Layer
Security (TLS v1) protocols as well as a full-strength general purpose cryptography library.
The license conditions are copied below.
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the
original SSLeay license apply to the toolkit.
See below for the actual license texts.Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL, please contact openssl-core@openssl.
org.
OpenSSL License
Copyright (c) 1998-2008The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment: “This product includes software developed by the OpenSSL Project for use in the
OpenSSLToolkit. (http://www.openssl.org/)”.
4. The names “OpenSSLToolkit” and “OpenSSL Project” must not be used to endorse or promote products
derived from this software without prior written permission. For written permission, please contact openssl-
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their
names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes
software developed by the OpenSSL Project for use in the OpenSSLToolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BYTHE OpenSSL PROJECT ``AS IS’’AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SHALLTHE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION). HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY,WHETHER
IN CONTRACT, STRICT LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH
DAMAGE.
This product includes cryptographic software written by EricYoung ([email protected]). This product includes
Original SSLeay License
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;
not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright
Copyright remains EricYoung’s, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, EricYoung should be given attribution as the author of the parts of the
library used.
This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: “This product includes cryptographic software written by EricYoung (eay@cryptsoft.
com)”.The word ‘cryptographic’ can be left out if the rouines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application
code) you must include an acknowledgement:“This product includes software written byTim Hudson (tjh@
cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERICYOUNG ``AS IS’’AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALLTHE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITEDTO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION). HOWEVER
CAUSED AND ON ANYTHEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OFTHIS
SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]
29
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING
AGREEMENT BETWEENYOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER
ELECTRONICS B.V.A DUTCH LIMITED LIABILITY COMPANY (OWNERS OF MAGNAVOX),WITH ITS
PRINCIPAL OFFICE AT GLASLAAN 2, 5616 LW EINDHOVEN,THE NETHERLANDS AND ITS SUBSIDIARY
COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).THIS AGREEMENT GIVESYOUTHE RIGHTTO
USE CERTAIN SOFTWARE (THE “SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONIC
FORM WHICH MAY HAVE BEEN PROVIDED SEPARATELY ORTOGETHER WITH A PHILIPS PRODUCT (THE
“DEVICE”) OR A PC. BY DOWNLOADING, INSTALLING OR OTHERWISE USINGTHE SOFTWARE,YOU
ACCEPT AND AGREETO BE BOUND BY ALL OFTHETERMS AND CONDITIONS OFTHIS AGREEMENT.
IFYOU DO NOT AGREETOTHESETERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR
OTHERWISE USETHE SOFTWARE. IFYOU ACQUIREDTHE SOFTWARE INTANGIBLE MEDIA E.G. CD
WITHOUTTHE OPPORTUNITYTO REVIEWTHIS LICENSE AND DO NOT ACCEPTTHESETERMS,YOU MAY
RECEIVE A FULL REFUND OFTHE AMOUNT, IF ANY,THATYOU PAID FORTHE SOFTWARE IFYOU RETURN
THE SOFTWARE UNUSED WITH PROOF OF PAYMENT WITHIN 30 DAYS FROMTHE DATE OF PURCHASE.
1.
Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to
install and use, on the Device or a PC, as applicable, one (1) copy of the specified version of the Software
in object code format as set out in the user documentation solely for your personal use.The Software is “in
use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the
Device.
2.
Ownership. The Software is licensed and not sold to you.This Agreement grants you only the right to use the
Software, but you do not acquire any rights, express or implied, in the Software other than those specified in
this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including all
patents, copyrights, trade secrets, and other intellectual property rights incorporated therein.The Software is
protected by copyright laws, international treaty provisions, and other intellectual property laws.Therefore,
other than as expressly set forth herein, you may not copy the Software without prior written authorization
of Philips, except that you may make one (1) copy of the Software for your back-up purposes only.You may
not copy any printed materials accompanying the Software, nor print more than one (1) copy of any user
documentation provided in electronic form, except that you may make one (1) copy of such printed materials
for your back-up purposes only.
3.
4.
License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign,
loan, or otherwise transfer the Software.You shall not, and you shall not permit any third party, to reverse
engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits
the foregoing restriction.You may not remove or destroy any product identification, copyright notices, or other
proprietary markings or restrictions from the Software.All titles, trademarks, and copyright and restricted rights
notices shall be reproduced on your back up copy of the Software.You may not modify or adapt the Software,
merge the Software into another program or create derivative works based upon the Software.
Termination of certain functionality.The Software may contain components of certain licensed software
including software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital
rights management technology for Windows Media. Content providers are using the digital rights management
technology for Windows Media (“WM-DRM”) to protect the integrity of their content (“Secure Content”)
so that their intellectual property, including copyright, in such content is not misappropriated.Your Device may
also use WM-DRM software to transfer or play Secure Content (“WM-DRM Software”). If the security of
such WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon the request of
the owners of Secure Content (“Secure Content Owners”)) the WM-DRM Software’s right to acquire new
licenses to copy, store, transfer, display and/or play Secure Content. Revocation does not alter the WM-DRM
Software’s ability to play unprotected content.A list of revoked WM-DRM Software is sent to your PC and/
or your Device whenever you download a license for Secure Content. Microsoft may, in conjunction with
30
Download from Www.Somanuals.com. All Manuals Search And Download.
such license, also download revocation lists onto your Device on behalf of Secure Content Owners, which
may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content. Secure Content
Owners may also require you to upgrade some of the WM-DRM components distributed with this Software
(“WM-DRM Upgrades”) before accessing their content.When you attempt to play Secure Content,WM-DRM
Software built by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consent
before the WM-DRM Upgrade is downloaded.WM-DRM Software built by Philips may do the same. If you
decline the upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade;
however, you will still be able to access unprotected content and Secure Content that does not require the
upgrade.WM-DRM features that access the Internet, such as acquiring new licenses and/or performing a
required WM-DRM Upgrade, can be switched off.When these features are switched off, you will still be able
to play Secure Content if you have a valid license for such content already stored on your Device. However,
you will not be able to use certain of the WM-DRM Software features that require Internet access such as the
ability to download content that requires the WM-DRM Upgrade.All title and intellectual property rights in
and to the Secure Content is the property of the respective Secure Content owners and may be protected
by applicable copyright or other intellectual property laws and treaties.This Agreement grants you no rights to
use such Secure Content.To summarize, if the Software contains Microsoft WM-DRM components – Secure
Content you desire to download, copy, store, display, transfer, and/or play is protected by the Microsoft WM-
DRM components of the Software. Microsoft, Secure Content Owners, or Secure Content distributors may
deny you access, or restrict your access, to Secure Content even after you have paid for, and/or obtained, it.
Neither your consent nor the consent or approval of Philips is necessary for any of them to deny, withhold or
otherwise restrict your access to Secure Content. Philips does not guaranty that you will be able to download,
copy, store, display, transfer, and/or play Secure Content.
5.
Open Source Software.Your license rights do not include any right or license to use, distribute or create
derivative works of the Software in any manner that would subject the Software to Open SourceTerms.
“Open SourceTerms” means the terms of any license that directly or indirectly (1) create, or purport to create,
obligations for Philips with respect to the Software or derivative work thereof; or (2) grant, or purport to
grant, to any third party any rights or immunities under Philips’ intellectual property or proprietary rights in the
Software or derivative work thereof.
6.
7.
Termination.This Agreement shall be effective upon installation or first use of the Software and shall terminate
(i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii) upon
destruction of all copies of the Software and related materials provided to you by Philips hereunder. Philips’s
rights and your obligations shall survive the termination of this Agreement.
Upgrades. Philips may, at its sole option, make upgrades to the Software available by general posting on a
website or by any other means or methods. Such upgrades may be made available pursuant to the terms
of this Agreement or the release of such upgrades to you may be subject to your acceptance of another
agreement.
8.
9.
Support Services. Philips is not obligated to provide technical or other support (“Support Services”) for the
Software. If Philips does provide you with Support Services, these will be governed by separate terms to be
agreed between you and Philips.
Limited SoftwareWarranty. Philips provides the Software ‘as is’ and without any warranty except that the
Software will perform substantially in accordance with the documentation accompanying the Software for a
period of one year after your first download, installation or use of the Software, whichever occurs first. Philips’
entire liability and your exclusive remedy for breach of this warranty shall be, at Philips’ option, either (i) return
of the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does not
meet the warranty set forth herein and that is returned to Philips with a copy of your receipt.This limited
warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful
application.Any replacement Software will be warranted for the remainder of the original warranty period or
thirty (30) days, whichever is longer.This limited warranty shall not apply to you if the Software was provided
to you free of charge on an evaluation only basis.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
10. NO OTHERWARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND ITS LICENSORS DO NOT
WARRANTTHATTHE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET
YOUR REQUIREMENTS.YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OFTHE SOFTWARE
TO ACHIEVEYOUR INTENDED RESULTS,AND FORTHE INSTALLATION OF, USE OF,AND RESULTS
OBTAINED FROMTHE SOFTWARE.TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
PHILIPS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS,WHETHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITEDTOTHE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE,AND ACCURACY OR COMPLETENESS OF RESULTS WITH
RESPECTTOTHE SOFTWARE ANDTHE ACCOMPANYING MATERIALS.THERE IS NO WARRANTY
AGAINST INFRINGEMENT. PHILIPS DOES NOT WARRANTTHATYOU WILL BE ABLETO DOWNLOAD,
COPY, STORE, DISPLAY,TRANSFER,AND/OR PLAY SECURE CONTENT.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE
LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES
WHATSOEVER, INCLUDING,WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR
REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF
USE OR OTHER PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OFTHE
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PHILIPS’ OR ITS LICENSORS’AGGREGATE
LIABILITY FOR DAMAGES ARISING OUT OFTHIS AGREEMENT EXCEEDTHE GREATER OFTHE PRICE
ACTUALLY PAID BYYOU FORTHE SOFTWARE OR FIVE POUNDS STERLING (5.00).
12. Trademarks. Certain of the product and Philips names used in this Agreement, the Software, and the printed
user documentation may constitute trademarks of the Philips, its licensors or other third parties.You are not
authorized to use any such trademarks.
13. Export Administration. You agree that you will not directly or indirectly, export or re-export the Software
to any country for which the United States Export Administration Act, or any similar United States law or
regulation requires an export license or other U.S. Government approval, unless the appropriate export license
or approval has first been obtained. By downloading or installing the Software you agree to abide by this
Export provision.
14. Governing law. This Agreement is governed by your local laws without reference to its conflict of laws
principles.Any dispute between you and Philips regarding this Agreement shall be subject to the non-exclusive
jurisdiction of the local courts.
15. General. This Agreement contains the entire agreement between you and Philips and supersedes any prior
representation, undertaking or other communication or advertising with respect to the Software and user
documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in
full force and effect.This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.
16. The EULA is for the firmware embedded in the Blu-ray Disc player. The EULA above is subject to periodical,
unilateral change by Philips; the latest version can be found at EULA-hyperlink :
32
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
BDP7500_98_UM_V2.0_944
Download from Www.Somanuals.com. All Manuals Search And Download.
|