Thank you for purchasing this Philips Elegance 55 answering
machine. With this user-friendly unit you can enjoy the
advantage of quality performance in your communication
lifestyle.
Steps to install the battery:
SETTING THE CLO CK O F YO UR
ELEGANCE 55
RECO RDING YO UR MEMO MESSAGE
TURN IN G YO UR ELEGAN CE 55 O N /O FF
MEMO
•
If you want to turn on your machine and record messages,
press once the ON/OFF BUTTON
Indicator will light up.
. The Answer On/Off
To listen to the clock settings, press once the CLOCK BUTTON (adjust
the Volume Slider to your desirable volume level).
Reminder : If your clock is not set properly (day, hour and minute),
the Screen Display will show “CL”. Otherwise, “CL” will
not be displayed.
FEATURES O F YO UR ELEGANCE 55
•
If you want to turn off your machine and do not wish to record
MEMO
1. Press and hold the MEMO BUTTON
heard, then release the MEMO BUTTON
until a long beep is
messages, press once the ON/OFF BUTTON
Answer On/Off Indicator will extinguish.
again. The
MEMO
.
1.
2. Record your memo message towards the Microphone (at a
distance between 5 to 8 centimetres). You have about 60
seconds to record.
3. After you finish, press once the PLAY/STOP BUTTON
Results :
Steps to set your clock’s day, hour and m inute :
2.
3.
9.
RECO RDING THE INCO MING MESSAGES
If you want to stop the settings below, just press once the PLAY/
.
10.
STOP BUTTON
. The clock will revert to its previous settings.
1. Turn your Elegance 55 over.
Once your Elegance 55 is ON, it will pick up the incoming call
after 4 rings if there is no new message in the machine, or 2
rings if there are new messages.
1. Press and hold the CLOCK BUTTON until a voice announces
a day, then release the CLOCK BUTTON.
•
•
The Answer On/Off Indicator will flash.
The Screen Display will show the total number of messages recorded.
2. After locating the battery compartment, open the compartment
cover by unscrewing the adjacent screw with a screwdriver.
3. Place a 9 Volt 6LR61 battery into the compartment by following
the positive/negative polarity arrangement as indicated inside.
4. Replace the cover and screw in the screw until the cover is
completely closed.
11.
MEMO
OGM
4.
MEMO
OGM
2. Press either the FORWARD
or REWIND BUTTON
5.
7.
6.
8.
to choose the day you wanted to set.
3. When the day you wanted to set is announced, press once
2 W AYS TO LISTEN TO YO UR RECO RDED
MEMO MESSAGES
the CLOCK BUTTON.
OGM
4. Continue to press either the FORWARD
or REWIND
MEMO
BUTTON
to choose the hour you wanted to set.
Adjust the Volume Slider to your desirable volume level.
After installing the battery, plug in the telephone plug and power
adaptor as shown in the diagram below.
MEMO
5. When the hour you wanted to set is announced, press once
the CLOCK BUTTON.
6. Continue to press either the FORWARD
•
Press once the MEMO BUTTON
. After listening, the
Answer On/Off Indicator still will continue flashing.
OGM
or REWIND
to choose the minute you wanted to set.
•
Press once the PLAY/STOP BUTTON
. After listening, the
MEMO
1. Volume Slider
2. Screen Display
7. Clock button
8. Microphone
BUTTON
Answer On/Off Indicator will stop flashing and light up steadily;
the Screen Display will show the total number of messages
recorded.
7. When the minute you wanted to set is announced, press once
the CLOCK BUTTON.
3. Play/Stop button
4. Forward/OGM button
9. Rewind/Memo button
10. Erase button
5. Answer On/Off Indicator 11. Speaker
6. On/Off button
1
3
5
7
9
Table-top support
W HAT YO U SEE O N THE SCREEN
DISPLAY AND ITS MEANING
RECO RDING YO UR O W N O UTGO ING MESSAGE
SELECTIVELY ERASING YO UR MEMO
MESSAGES
LISTENING TO YO UR MESSAGES
Your Elegance 55 has a pre-recorded outgoing message: “Hello, we
cannot take your call at the moment. Please leave your message after
Notes :
•
•
Adjust the Volume Slider to your desirable volume level.
The Screen Display will show the message number that you are
listening to.
If you have set your clock, the voice will announce the day and time
after each message received.
“Lo” there is no battery,
not installed properly,
or battery low.
“ES” all messages are
MEMO
the tone.” You can listen to this pre-recorded outgoing message by
OGM
erased.
or
pressing once the OGM BUTTON . You can also listen to any recorded
OGM
outgoing message by pressing once the OGM BUTTON
.
•
“CL” the clock is not set or
“SA” all erased messages
OGM
MEMO
it is not set properly.
are restored.
1. Press once either the MEMO
to play your memo message.
or PLAY/STOP BUTTON
W hen listening to your new m essages
“Fu” the memory is full; should
2. While your memo message is playing, press once the ERASE
BUTTON
Result : The next memo message, if any, will be played automatically.
“oo” there is/are new
Your Elegance 55 will inform you that you have new messages by a
flashing Answer On/Off Indicator. To listen to your new messages, press
erase some messages to
.
memo(s).
Steps to record your own outgoing m essage:
allow message recording.
OGM
once the PLAY/STOP BUTTON
press once again the same button.
Notes :
. If you want to stop listening, just
Repeat step 2 if you also want to erase the memo message.
1. Press and hold the OGM BUTTON
heard, then release the OGM BUTTON
until a long beep is
OGM
“Sc” to change the remote
.
control security code.
2. Record your own outgoing message towards the Microphone
(at a distance between 5 to 8 centimetres). You have about 60
seconds to record.
3. After you finish, press once the PLAY/STOP BUTTON
Result : Your own outgoing message will be played automatically. If you
•
If your memory have both old and new messages, pressing once the
PLAY/STOP BUTTON will only play the new messages.
Wall Mounting
ERASING ALL YO UR MEMO MESSAGES
INSTALLING BATTERY INTO YOUR ELEGANCE 55
•
After all new messages are played, the Answer On/Off Indicator will
stop flashing, and the Screen Display will show the total number of
recorded messages.
74mm
.
Reminder :
Important:
•
This will also erase all your recorded messages. If you want to
maintain some of your recorded messages, it is recommended that
you selectively erase your memo messages.
want to stop it, just press once the PLAY/STOP BUTTON
.
•
It is strongly recommended that battery be installed. The battery
acts as back up to prevent any loss of recorded messages when the
main power supply fails.
If there is no battery installed, not installed properly, or battery low,
the Screen Display will show “Lo”.
W hen listening to your old m essages
Steps to erase your own outgoing m essage and restore
•
For the instructions to erase all your recorded messages, see
ERASING ALL YOUR RECORDED MESSAGES in later
sections.
the pre-recorded one:
•
If you want to listen again to old messages, just press once the
OGM
PLAY/STOP BUTTON
same button again.
. To stop listening, press once the
1. Press once the OGM BUTTON
2. While your outgoing message is playing, press once the ERASE
BUTTON
to play your own outgoing message.
•
•
Results:
OGM
•
•
•
The Screen Display will show a count from 1 to 15.
A short beep will be heard.
The Answer On/Off Indicator will light up.
•
You can also press once either the FORWARD
or
.
Before opening the battery compartment, make sure that the telephone
plug and power adaptor are disconnected from Elegance 55.
MEMO
Result : The pre-recorded outgoing message will be played
automatically and your own is already erased from
memory.
REWIND BUTTON
message.
if you want to skip or repeat the
Elegance 55 is now ready to answer calls for you.
2
4
6
8
10
55 eleg. (UK) P. 1 a – V3
55 eleg. (UK) P. 1 b – V3
Download from Www.Somanuals.com. All Manuals Search And Download.
55 eleg. (UK) P. 1 C – V3
|