Register your product and get support at
SE245
EN Telephone Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using your SE245 17
Table of contents
4.1 Calls
4.1.1 Make a call
4.1.2 Pre-dial
17
17
17
1
Important
4
4
5
4.1.3 Dial one-touch
numbers 1 and 2
4.1.4 Call from
the phonebook
4.1.5 Call waiting
1.1 Power requirements
1.2 Conformity
1.3 Using GAP standard
compliance
1.4 Recycling and disposal
1.5 Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
17
17
17
5
6
4.1.6 Call from the call log 18
4.1.7 Answer a call
4.1.8 Adjust volume
4.1.9 Mute
18
18
19
19
7
4.1.10End a call
2
Your SE245 Digital
CordlessTelephone
4.2 Switch handset on/off 19
4.3 Intercom 19
4.3.1 Call another handset 19
8
8
2.1 What’s in the box?
2.2 What you will also need8 4.3.2 Transfer an external call to
2.3 Overview of the
handset
2.4 Handset display
another handset
4.3.3 Three-party conference
call
20
9
11
20
2.5 Overview of the base 12 4.4 Voicemail
2.6 Menu navigation 13 4.4.1 Dial your network
20
voicemail service
21
3
Getting started
14
3.1 Position the base
3.2 Connect the base
3.3 Install and charge the
handset batteries
14
5
Phonebook
21
14 5.1 View and dial phonebook
entries
21
22
22
22
23
15 5.2 Store an entry
16 5.3 Entering names
5.4 Character map
5.5 Enter a pause
3.4 Using multipacks
Table of contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6 View an entry
5.7 Edit an entry
5.8 Delete an entry
5.9 Delete all entries
5.10 One-touch keys
5.10.1Dial a one-touch
number
23
7
Clock & Alarm
29
29
29
23 7.1 Set date and time
23 7.2 Set alarm
23 7.3 Set alarm ringer
24
melody
30
24
8
Personal settings 30
5.10.2Store a phonebook entry
as a one touch number
8.1 Handset tones
8.1.1 Ring volume
30
30
31
31
31
32
32
32
33
33
(direct memory)
5.10.3Delete a one touch
number
24 8.1.2 Ringer melody
8.1.3 Key tones on/off
24 8.1.4 First ring
8.2 Handset name
8.3 Auto pick-up
6
Caller ID and
Call log
25 8.4 Auto hang-up
25 8.5 Display language
26 8.6 Keypad lock
6.1 Call log
6.1.1 View the call log
6.1.2 Dial from the call log 26
6.1.3 Save a number from
the call log to
the phonebook
6.1.4 Delete a call log entry 27 9.3 Call barring
9
Advanced settings 33
9.1 Recall time
27 9.2 Dial mode
33
34
34
6.1.5 Delete entire call log 27 9.3.1 Switch call barring
6.2 Redial
27
on/off
34
6.2.1 Redial the last number 27 9.3.2 Set a number to be
6.2.2 Copy a redial number
to the phonebook
barred
28 9.4 Baby call
34
35
6.2.3 Delete a redial list entry 28 9.4.1 Switch baby call on
6.2.4 Delete entire redial list 28
or off
35
9.4.2 Set the baby call
number
35
9.4.3 Dial a baby call number 36
2
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
9.5 Registration
36 10.9 Call screening
44
9.5.1 Register a handset
9.5.2 Select a base
36 10.9.1Switch handset call
37
screening on/off
45
9.5.3 Unregister a handset 37 10.9.2Switch base station call
9.6 PIN
38
screening on/off
45
9.7 Reset
38 10.10 Memory full
38
39 11 Maintenance and
45
9.7.1 Default settings
9.8 Auto prefix
9.9 Country setting
39
replacement
11.1 Cleaning
46
46
10 Using your
11.2 How to replace the
battery
answering machine 40
46
10.1 SE245 base answering
machine control keys 40 12 Technical data
47
10.2 Switch on/off
40
10.3 Play messages
10.4 Delete all messages
10.5 Record a memo
10.6 Outgoing messages
10.6.1Answer & Record
10.6.2Answer Only
10.6.3Set answer mode
10.6.4Record, play or delete
your own outgoing
message
40 13 Frequently asked
41
41
questions
48
51
42 14 Index
42
42
42
42
10.7 Answer machine
settings
10.7.1Ring delay
10.8 Remote access
10.8.1Remote Access
activated/deactivated
43
43
44
44
Table of contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• The voltage on the
network is classified as
TNV-3 (Telecommunication
Network Voltages), as
defined in the standard EN
60-950.
1 Important
Take time to read this user
manual before you use your
telephone. It contains important
information and notes regarding
operating your telephone.
Warning
• This equipment is not
designed to make emergency
calls in the event of a power
failure. An alternative has to
be made available to allow
emergency calls.
1.1 Power requirements
• This product requires an
electrical supply of 220–240
volts, alternating monophased • High voltage. Never open the
power, excluding IT
installations defined in
standard EN 60-950. In
product or attempt any repair.
• Keep the product away from
liquid.
case of power failure, the
communication can be lost.
• The electrical network
is classified as hazardous
according to criteria in the
standard EN 60-950.The
only way to power down
this product is to unplug the
power supply unit from the
electrical outlet. Ensure the
electrical outlet is located
close to the apparatus and is
always easily accessible.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
• When the phone is ringing
avoid holding the earpiece
too close to your ear as it
may damage your hearing.
• Do not use the product
in places where there are
explosive hazards.
4
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not let small metal
objects come into contact
with the product.This can
1.3 Using GAP standard
compliance
The GAP standard guarantees
deteriorate audio quality and that all DECT GAP handsets
damage the product.
• Handsfree activation could
and base stations comply with
a minimum operating standard
suddenly increase the volume irrespective of their make.Your
in the earpiece to a very high handset and base station are
level : make sure the handset
is not too close to your ear.
• Refer also to the Cautions
in chapters and subchapter
sections.
GAP compliant, which means the
minimum guaranteed functions
are :register a handset, take the
line, receive a call and dial.
The advanced features may not
be available if you use another
handset than a SE240/245 with
your base station.To register
and use your SE240/245 handset
with a GAP standard base
station of a different make,
first follow the procedure
described in the manufacturer’s
instructions, then follow the
procedure described on page 36.
1.2 Conformity
Hereby, Philips Consumer
Electronics, declares that this
SE245x is in compliance with
the essential requirements and
other relevant provisions of
Directive 1999/5/EC.
The declaration of conformity
is available at :
To register a handset of
This product can only be
connected to the analogue
telephone networks of the
countries mentioned on the
packaging.
another make to the SE240/245
base station, place the base
station into registration mode,
then follow the procedure in
the manufacturer’s instructions.
Important
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 Recycling and disposal Use one of the following
disposal options :
Disposal instructions for
old products
The WEEE directive (Waste
Electrical and Electronic
Equipment; 2002/96/EC) has
1 Dispose of the complete
product (including its cables,
plugs and accessories) in the
designated WEEE collection
facilities.
been put in place to ensure that 2 If you purchase a
products are recycled using best
available treatment, recovery
and recycling techniques to
ensure human health and high
environmental protection.
replacement product, hand
your complete old product
back to the retailer. He
should accept it as required
by the WEEE directive.
Your product is designed and
manufactured with high quality
materials and components,
which can be recycled and
reused. Do not dispose of your
old product in your general
household waste bin.
Disposal instructions
for batteries
Batteries should not be
disposed of with general
household waste.
Packaging information
Philips has marked the
Inform yourself about the local
separate collection system
for electrical and electronic
products marked by this
symbol :
packaging with standard
symbols designed to promote
the recycling and appropriate
disposal of your eventual waste.
A financial contribution
has been paid to the
associated national
recovery and recycling
system.
6
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
The labelled packaging
material is recyclable.
• Philips confirms that if
its products are handled
properly for their intended
use, they are safe to use
according to scientific
evidence available today.
• Philips plays an active
role in the development
of international EMF and
safety standards, enabling
Philips to anticipate
1.5 Electric, Magnetic
and Electromagnetic
Fields (“EMF”)
• Philips Royal Electronics
manufactures and sells many
consumer oriented products
which usually, as with any
electronic apparatus, have the
ability to emit and receive
electro magnetic signals.
• One of Philips’ leading
Business Principles is to
take all necessary health and
safety precautions for our
products, to comply with all
applicable legal requirements
and to stay well within the
EMF standards applicable at
the time of producing the
products.
further developments in
standardization for early
integration in its products.
• Philips is committed to
develop, produce and market
products that cause no
adverse health effects.
Important
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your SE245 Digital CordlessTelephone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers,
2.1 What’s in the box?
SE245 handset
Power
adaptor
Battery door Line cord*
2x AAA
rechargeable
batteries
SE245 base
User manual
Quick start guide
Warranty
information
2.2 What you will also need
• For the call log to function,
subscribe to your network’s
Caller Line Identification
service.
• For voicemail to function,
subscribe to your network’s
voicemail service.
Note
*The line adaptor may not be
attached to the line cord. If this is
the case, please connect the line
cord to the line adaptor before
plugging it into the line socket.
Warning
Always use the cables and
batteries supplied.
8
Your SE245 Digital Cordless Telephone
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Overview of the
handset
1
2
Earpiece
Display
See page 11 for an overview of
the display icons.
1
2
3
Menu key
Enter the main menu.
Select the option displayed on
screen.
Confirm a menu option – OK
is displayed on screen.
4
Call log/Scroll up/
Volume up
3
4
14
Open the calls log.
Scroll up through lists and
settings.
13
12
Increase the earpiece volume.
5
6
5
Talk/Recall
Make or answer a call.
Use recall (R) functions.
6
One-touch dialling keys
Press and hold for one-touch
dialling of pre-set numbers.
7
/Keypad lock
Press and hold to lock/unlock
the keypad.
During a call, press and hold
to switch from pulse dialling to
tone dialling.
11
10
7
8
9
Dial a star.
Your SE245 Digital Cordless Telephone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Loudspeaker key
Press and hold to switch handset
off (when in standby) or on.
13 Phonebook/Scroll down/
Volume down
Activate and deactivate the
loudspeaker during a call.
Warning
Handsfree activation can
suddenly increase the volume
in the earpiece to a very high
level. Make sure the handset is
not too close to your ear.
Open the phonebook.
Scroll down through lists and
menus.
Decrease the earpiece volume.
14 Redial/Scroll right/
Clear/Mute
9
Intercom (at least
2 handsets needed)
Open the redial list.
In standby mode, use to make
an internal call.
During a call, use to transfer
an external call to another
handset.
Scroll to the right.
Delete characters on screen
when entering names and
numbers.
Mute/unmute the microphone
during a call.
10 0 key
In standby, press and hold to
switch between handset name
and date/time display.
11 #/Ringer off/Pause
Press and hold to switch
handset ringer on or off.
When dialling or storing a
number, press and hold to enter
a pause (P).
Go back to previous menu level
– BACK displayed on screen.
Dial a #, displayed as
.
12 End/Exit/Handset on-off
End a call.
When in a menu, go back to
standby mode.
10
Your SE245 Digital Cordless Telephone
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Handset display
Flashes fast when the
memory is full.
Steady when the handset is
registered and within range
of the base.
1
Flashes when the handset
is out of range or searching
for base.
Tip
In standby, press and hold
to switch between the
handset name and date and
time display.
3
2
4
1
Status icons
Battery status
On when the line is in use.
Flashes when there is an
incoming call.
Flashes when you have new
voicemail messages.
Off when you have no
voicemail messages.
On when you have missed
calls and new number(s) in
the call log.
2
displayed
Press
or
to scroll
through the options in
a menu, to open the
phonebook or call list when
in standby.
OK displayed.
Press the
3
4
key to select
and validate a setting.
BACK displayed.
Phonebook is open.
The alarm clock has been set.
Handsfree mode is on.
Handset ringer is off.
Answering machine on.
Off when answering
machine is off.
Press the
to go back to
the previous menu option,
to cancel an action or to
delete a character.
Flashes when you have new
messages.
Your SE245 Digital Cordless Telephone
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Overview of the base
1
2
3
4
5
6
7
8
1
LED Status
Action
On
Off
Answering machine on
Answering machine off
Long then short flashes New message(s)
Flashes evenly
Flashes quickly
Play/Stop
Answering machine On/Off
Delete
Skip back
Skip forward
Speaker volume up/down
Paging key (see next page)
Recording
Memory Full
2
3
4
5
6
7
8
12
Your SE245 Digital Cordless Telephone
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Paging key
Standby mode
Paging is a useful way of finding
lost handsets.
If you do not press any button
on the handset for 15 seconds
the display will automatically
return to standby. It will also
return to standby when the
handset is placed on the base
or charger.
1
Press
on the base.
All handsets ring.
2
Press
again to cancel
the paging call or press any
key on the handset to stop
the paging call.
2.6 Menu navigation
The basic steps of navigating
through the menu and
on-screen options.
1
From the standby screen,
press
The main menu is opened.
Use the and keys
to scroll through the menu.
Soft key options OK and
BACK are displayed.
.
2
3
Press
to select OK
and open a sub-menu or
validate an option.
Press
to select BACK
and go back to previous
menu level, correct a
character or cancel an action.
4
Press
to return to
standby.
Your SE245 Digital Cordless Telephone
13
Download from Www.Somanuals.com. All Manuals Search And Download.
• Always use the telephone
line cord supplied with the
unit. Otherwise you may not
get a dial tone.
3 Getting started
3.1 Position the base
Place the base within reach
of the telephone line and
electricity sockets.
Note
In some countries the line
adaptor may not be attached to
the line cord. If this is the case,
please connect the line cord to
Tip
The position in which you place the line adaptor before plugging
the base can have an effect on
the range and performance of
your product. Avoid placing
the base too close to large
metal objects such as filing
cabinets, radiators or electrical
appliances.This can impair
the range and sound quality.
Buildings with thick internal
and external walls may impair
transmission of signals to and
from the base.
it into the line socket.
1
Plug the line cord and
the power cable into the
sockets at the back of the
base.
3.2 Connect the base
Warning
• Make sure you connect
the power adaptor and
telephone line cord correctly
as incorrect connection
could damage the product.
14
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Plug the other ends of the
line cord and power cable
into the telephone socket
and mains power socket.
1
2
Slide off the battery door
(if fitted).
Insert the batteries as
indicated and slide the door
back on.
3.3 Install and charge the
handset batteries
3
4
Place the handset face up
on the base to charge.
A beep confirms the handset
is placed correctly and
charging will begin.
When there is enough
power in the batteries, the
handset will automatically
register with the base.
The standby screen is
Warning
• The handset must be charged
for at least 24 hours before
using it for the first time.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
displayed. Or if the display
shows WELCOME: you must
select your country.
Your SE245 is supplied with
two rechargeable batteries.
See next page.
Getting started
15
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need to select your
country
5
Leave the handset until the
batteries are fully charged
(at least 24 hours).
• Press
.
The country name is shown on
the display.
The handset batteries are
fully charged when the
• Press
or
to select
charging animation stops and
your country then press
The screen language and other
important settings are set for
the country selected.
.
the
is displayed.
(battery charged) icon
Warning
• Press
previous screen.
to go back to the
If you insert alkaline batteries
instead of the NiMH batteries
WARNING BATT will appear on
the display. Replace immediately
with the batteries supplied.
Note
• If you receive a call before
the country is set, you can
take the call. When the call is
ended the display returns to
the original screen ready for
you to set the country.
Caller Identification will not
work until the country has
been selected.
3.4 Using multipacks
If you have purchased a
multipack you will have
additional handsets, chargers,
power adaptors and AAA
rechargeable batteries.
• If you make a mistake when
choosing your country, please
refer to ‘Country setting’, on
page 39.
1
2
3
Plug the chargers into a
power socket.
Install the batteries supplied
into the other handsets.
Place the handsets on the
chargers to fully charge
the batteries for at least
24 hours.
16
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.4Call from the
phonebook
4 Using your SE245
1
Press
.
The first entry in the
4.1 Calls
phonebook is displayed.
2
3
Scroll
entry you want.
Press
or
to the
4.1.1Make a call
1
Press
.
to dial the
2
Dial the telephone number.
number.
Tip
4.1.2Pre-dial
Instead of scrolling to browse
the phonebook entries, press
the numeric key corresponding
to the first letter of the
1
Enter the phone number
(maximum 24 digits).
If you make a mistake
press
Press
number entered.
.
entry you wish to locate. For
2
to dial the phone example,
pressing
entries starting with A.
will show the
Pressing
again will show the
4.1.3Dial one-touch
numbers 1 and 2
entries starting with B, etc...
1
Press and hold
or
until the number is
displayed and dialled.
If no number is stored, you
hear a beep.
4.1.5Call waiting
If you have subscribed to Call
Waiting service, the earpiece
will emit a beep tone to inform
you that there is a second
incoming call.The number
or name of the second caller
will also be displayed if you
have subscribed to Caller Line
Using your SE245
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification service (CLI).
Please contact your network
provider for more information
on this service.
Warning
When the phone is ringing, avoid
holding the earpiece too close to
your ear as it may damage your
hearing. Handsfree activation can
suddenly increase the volume in
the earpiece to a very high level.
Make sure the handset is not too
close to your ear.
To answer the second call,
press
.
4.1.6Call from the call log
1
Press
.
The first entry in the call log
is displayed.
Tip
If Auto pick-up mode is on
(see page 32), simply lift up the
handset from its base to answer
the call.The default setting is
off, in which case you will need
2
3
Scroll
or
to the
entry you want.
Press
to dial the
number.
Note
to press
to answer a call.
You need to subscribe to
your network’s Caller Line
Note
Identification service to be able An incoming call has priority
to see the caller’s number in
the call log. See ‘Call log’ on
page 25 for more details.
over other events. Whenever
there is an incoming call, other
status in progress such as
phone setting, menu navigation,
etc. will be aborted.
4.1.7Answer a call
1
The phone rings and
4.1.8Adjust volume
flashes in the display. Press
1
During a call, press
or
or press
the call via the loudspeaker.
to answer
to adjust the earpiece
or loudspeaker volume.
The volume level is shown in
the handset display.
18
Using your SE245
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.9Mute
4.3 Intercom
Mute the microphone so that
This feature is only available
you can talk to someone else in when there are at least two
the room without your caller
hearing you.
registered handsets. It allows
you to make internal calls,
transfer external calls from one
handset to another and use the
conference option.
1
During a call, press
The microphone is muted.
Press again to turn the
microphone back on.
.
2
4.3.1Call another handset
4.1.10 End a call
Press
1
Press
.
1
.
• If you have two handsets,
the other handset is called
automatically.
• If more than two handsets
are registered to the base,
their numbers are displayed,
e.g. INT 2345 . Enter the
number of the handset you
want to call, or press
ring all handsets.
The call duration is displayed
on the handset screen for
about 5 seconds.
Tip
If Auto hang-up mode is on
(see page 32), simply replace
the handset on the base to end
the call.The default setting is
on.
*
to
2
Press
to hang up.
4.2 Switch handset on/off
Note
1
Press and hold
until the If the handset does not belong
handset switches off.
to the SE240/SE245 range, this
function may not be available.
2
Press and hold
again to
switch the handset back on.
Using your SE245
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.2 Transfer an external
call to another handset
If there are only two handsets,
the other handset is called
automatically.
When the other handset
answers announce the call
1
During an external call,
press
.
3
Your caller is put on hold.
Enter the number of the
handset you want to call.
If there are only two handsets,
the other handset is called
automatically.
2
then press and hold
connect both calls.
to
If the other handset does
not answer, press to
talk to your caller again.
Press to hang up.
3
When the other handset
answers, announce the
4
caller then press
transfer the call.
to
4.4 Voicemail
If the other handset does
not answer, press to
talk to your caller again.
If you have subscribed to your
network’s voicemail service (if
available) your SE245 displays
when you have new
Note
Before transferring the call, the
user is able to switch between
both internal and external calls
messages.
Depending on your country
and network services, the
voicemail number may be
pre-stored in your handset for
one-touch dialling using the
button.
by the
key.
4.3.3Three-party
conference call
1
During an external call,
press
Your caller is put on hold.
Enter the number of the
handset you want to call.
Note
.
The voicemail number is
pre-stored only if the country
where the phone was
purchased offers a voicemail
service.
2
20
Using your SE245
Download from Www.Somanuals.com. All Manuals Search And Download.
If the voicemail number is
not pre-stored you can add
a number, or overwrite the
existing stored number. See
‘Store a phonebook entry as a
5 Phonebook
The SE245 handset phonebook
can store up to 100 names and
one touch number’, on page 24. numbers.
Note
Numbers can be up to
4.4.1Dial your network
voicemail service
24 digits long and names up to
12 characters long. Entries are
stored in alphabetical order.
1
Press and hold
.
The number is displayed
and dialled. Follow the voice
prompts to play, save and
delete your messages.
Or
5.1 View and dial
phonebook entries
Note
If the
press
voicemail number.
icon is displayed,
to dial the
The first time
is pressed,
the display shows the name
of any pre-stored one-touch
network service numbers, if
Note
available, e.g. VOICEMAIL.
You can turn off the
When viewing the calls log,
press and hold
icon.
1
2
Press
Display shows the first entry.
Scroll or to the
.
.
entry you want.
Or
To search alphabetically,
press
then press the key
with the first letter of the
name, e.g. if the name begins
with N, press
twice.
Phonebook
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The display shows the first
entry beginning with N. If
required, scroll to the exact
entry.
For instance to enter the name
‘Paul’.
P
A
U
L
Press
Press
Press
Press
once.
once.
twice.
three times.
3
Press
to dial the entry
displayed.
To enter a space, press
.
5.2 Store an entry
Press to delete a character
1
2
3
Press
.
or press and hold
all characters.
to delete
PHONEBOOK is displayed.
Press
NEW ENTRY is displayed.
Press
ENTER NAME is displayed.
Enter a name and press
Enter a number. Press
to save.
.
.
5.4 Character map
Use the keypad to enter names
and characters.
4
5
.
Space
1
-
<
>
*
5
Press
standby.
to return to
A
D
G
J
B
C
F
2
3
4
5
6
S
8
Z
E
Note
H
K
N
Q
U
I
Cancel storing an entry by
pressing
the process.
at any time during
L
M
P
O
R
V
Y
7
?
5.3 Entering names
Use the alphanumeric keypad
to enter names in the
phonebook. See ‘5.4 Character
map’.
T
W X
0
9
22
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5 Enter a pause
If your SE245 is connected
to a switchboard, you may
need to enter a pause in a
stored number.This gives
the switchboard time to get
an outside line. A pause is
normally stored after the
switchboard access code
(e.g. 9).
5.7 Edit an entry
1
Press
.
2
Scroll to the entry you
want to edit and press
EDIT ENTRY is displayed.
.
Press
key again.
3
Edit the name and press
to confirm. Use
to
delete characters.
4
5
Edit the number and press
to confirm.
1
When storing a number,
Press
to return to
press and hold
until
standby.
the display shows
P.Then
continue storing the
number.
5.8 Delete an entry
1
Press
Scroll
.
2
or
to the
5.6 View an entry
entry you want to delete
1
Press
Scroll
twice.
to LIST ENTRY
and press
Scroll
ENTRY and press
Display shows CONFIRM?.
Press
.
2
3
4
5
to DELETE
and press
Enter the first letter of the
name to search
.
.
3
.
alphabetically then scroll
Press
to return to
or
entry.
Press
number.
Press
to the exact
to display the
to return to
standby.
4
5
5.9 Delete all entries
1
Press
Scroll
twice.
to DELETE ALL
2
standby.
and press
.
3
Display shows CONFIRM?.
Phonebook
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
to return to standby.
to confirm or
5.10.2 Store a phonebook
entry as a one touch
number (direct
memory)
5.10 One-touch keys
1
2
Press
Scroll
twice.
to DIRECT MEM
The
or
keys have
pre-stored phone numbers for
one-touch dialling.
and press
Press
.
3
or
to select
KEY 1 or KEY 2 and press
Note
.
The pre-stored numbers usually
give you access to services
offered by your network, but
this depends on your country
and network.You can set
the one touch keys to dial
numbers stored in your handset
phonebook.
The current entry, if any, is
displayed.
4
5
6
Press
again to open the
options menu.
Press
to ADD an entry
from the phonebook.
Scroll
or
to the
entry you want. Press
to confirm or
to standby.
to return
5.10.1 Dial a one-touch
number
1
Press and hold
The number is displayed and
dialled.
or
.
5.10.3 Delete a one touch
number
1
Press
twice.
2
Press
to cancel the
2
Scroll
to DIRECT MEM
dialling and return to
standby.
and press
Press
.
3
or
to select
KEY 1 or KEY 2 and press
.
The current entry is displayed.
24
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
Press
options menu.
Press
and press
Display shows CONFIRM?
Press to confirm.
NO ENTRY is displayed.
again to open the
6 Caller ID and
Call log
to select DELETE
.
.
If you have subscribed to
Caller Line Identification (CLI),
and provided the identity of
the caller is not withheld,
the number of the caller will
be displayed together with
the date & time of the call (if
provided by the network).
Note
• If the caller’s number is
stored in your phonebook
along with a name, the name
will also be displayed.
• Information about incoming
calls will vary by country and
network operator.
Some operators may charge
a subscription for their Caller
Line Identification service.
6.1 Call log
The call log contains details of
missed and received call. Details
may include the date and time
of the call, depending on your
Caller ID and Call log
25
Download from Www.Somanuals.com. All Manuals Search And Download.
network provider. Entries are
displayed in chronological order
with the most recent call at the
top of the list.
6.1.1View the call log
1
Press
.
The most recent number
– or name if stored in the
phonebook – is displayed.
New calls are marked with
Note
• The call log holds details of
up to 20 calls.
the
Scroll
icon flashing.
or through
2
• When the call log is full, a
new call replaces the oldest
in the list.
the calls log.
At the end of the log, you will
hear a beep.
• If you receive more than one
call from the same number,
only the most recent call is
kept in the call log.
If the number has more
than 12 digits, press
see the rest of the number.
Press again to see the
date and time of the call.
to
When you have missed calls
3
Press
to return to
(incoming calls that you haven’t
standby.
answered) the
displayed in the display on all
handsets registered to the base. The
icon will be
Note
icon stops flashing once
If one handset is used to view
the calls log, the icon on the
other handsets continue to
flash (multipack users only).
all new calls have been viewed.
6.1.2Dial from the call log
1
2
3
Press
calls log.
Scroll
entry you want.
Press to dial.
to open the
or
to the
26
Caller ID and Call log
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1.3Save a number from
the call log to the
phonebook
6.1.5Delete entire call log
1
2
3
Press
The most recent call is
displayed.
.
1
2
3
Press
The most recent call is
displayed.
Scroll
number you want to save
and press
.
Press
then scroll
to DELETE ALL and press
or
to the
.
Display shows CONFIRM?
Press to confirm or
to cancel and return to
standby.
.
.
SAVE NUMBER is displayed.
Press
.
4
5
Enter a name and press
The number is displayed. If
required, edit the number
.
6.2 Redial
and press
SAVED is displayed.
Press
standby.
to save.
The SE245 lets you redial the
last five numbers called.
Numbers can be up to 24 digits
long.
6
to return to
6.1.4Delete a call log entry 6.2.1Redial the last number
1
Press
.
1
Press
.
The most recent call is
displayed.
The last number dialled is
displayed.
2
3
4
Scroll
number you want.
Press then scroll
to DELETE and press
Display shows CONFIRM?
Press to confirm or
to cancel and return to
standby.
or
to the
2
3
Use
and
to scroll
through the list.
Press
number or
standby.
to dial the
.
.
to return to
Caller ID and Call log
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.2Copy a redial number
to the phonebook
6.2.4Delete entire redial
list
1
Press
to the entry you want to
copy and press
Display shows SAVE
NUMBER. Press
, scroll
or
1
2
3
Press
and scroll
ALL then press
Display shows CONFIRM?
Press to confirm.
EMPTY is displayed.
then press
to DELETE
.
.
2
.
.
3
4
Enter a name and press
Edit the number if required
.
Press
to return to
and press
.
standby.
SAVED is displayed.
5
Press
to return to
standby.
6.2.3Delete a redial list
entry
1
Press
to the entry you want to
delete and press
, scroll
or
.
2
3
Scroll
press
to DELETE and
.
Display shows CONFIRM?
.
Press
press
to confirm, then
to return to
standby.
28
Caller ID and Call log
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Press
7 Clock & Alarm
to cancel at any time.
If you subscribe to your
network’s Caller Identification
service, the time on your
SE245 may be set automatically
each time you receive a call,
depending on your network
provider.
7.2 Set alarm
1
Press
, scroll
to
CLOCK/ALARM and press
.
2
3
Scroll
and press
Scroll
to SET ALARM
.
or
to OFF,
ON ONCE or ON DAILY and
You can also set or adjust the
time using the Clock & Alarm
menu.
press
.
4
5
If you select ON ONCE or
ON DAILY, enter the time
using the 24 hour format
HH – MM, e.g. 14 45 for
2.45pm and press
Press
7.1 Set date and time
.
1
2
3
4
Press
, scroll
to
to return to
CLOCK/ALARM and press
standby.
.
Display shows DATE & TIME
Press
.
When the alarm goes off, press
. Enter the date in any key to stop the ring.
the format DD-MM e.g. 04
08 for 4 August and press
.
Enter the time using the
24 hour format HH – MM,
e.g. 14 45 for 2.45pm and
Note
• Once the alarm is set to on,
the
• The alarm will ring at the
medium level. ALARM ON
and the
display.
icon is displayed.
press
Press
to confirm.
to return to
will flash on the
standby.
Clock & alarm
29
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Set alarm ringer
melody
There are three alarm ringer
melodies.
8 Personal settings
1
2
3
Press
, scroll
to
8.1 Handset tones
Warning
When the phone is ringing,
avoid holding the earpiece too
close to your ear as it may
damage your hearing.
CLOCK/ALARM and press
.
Scroll
and press
Melodies are played.
Scroll
to ALARM TONE
.
or
to
MELODY 1
,
2
or
3
and press
.
8.1.1Ring volume
Choose from : Ringer Off, Low,
Medium, High and Boost.
Note
The default setting is High.
1
Press
, scroll
to
PERSONAL SET and press
.
HANDSET TONE is displayed.
2
3
4
Press
.
RING VOLUME is displayed.
Press
The current volume is played.
Press or to adjust
the ringer volume level and
.
press
to save the
setting.
Press
5
to return to
standby.
30
Personal settings
Download from Www.Somanuals.com. All Manuals Search And Download.
8.1.2Ringer melody
Choose from 10 ringer
melodies.
2
3
Press
KEYTONE and press
Scroll
, scroll
to
.
or
to select
1
2
3
Press
, scroll
to
ON or OFF and press
to confirm.
PERSONAL SET and press
.
4
Press
to return to
HANDSET TONE is displayed.
Press
RING MELODY and press
standby.
, scroll
to
.
8.1.4First ring
Currently melody is played.
Press
the ringer melody.
Your SE245 will automatically
detect the Caller Identification
(subscription dependent).Your
or
to select
A sample of the ringer melody phone will not ring until this
is played.
Press
setting.
Press
information is displayed. If you
wish to hear the ring before the
Caller Identification is displayed
you can manually set FIRST
RING to ON.
4
5
to save the
to return to
standby.
1
Press
, scroll
to
8.1.3Key tones on/off
When you press a key on the
handset you hear a beep.You
can switch these beeps on or
off.
PERSONAL SET and press
.
HANDSET TONE is displayed.
2
3
Press
, scroll
to
FIRST RING and press
.
Scroll
or
to select
1
Press
, scroll
to
ON or OFF and press
PERSONAL SET and press
to confirm.
.
4
Press
to return to
HANDSET TONE is displayed.
standby.
Personal settings
31
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Handset name
2
3
Scroll
UP and press
Scroll or
to AUTO PICK
Personalise your handset,
for example, with a name or
location – Peter or Bedroom.
.
to select
ON or OFF and press
1
Press
, scroll
to
to confirm.
PERSONAL SET and press
4
Press
to return to
.
standby.
2
Scroll
NAME and press
The current name is displayed. 8.4 Auto hang-up
to HANDSET
.
3
4
Press
current name.
Enter the name you want
– maximum 10 characters
to delete the
When auto hang-up is switched
on, you can end a call just by
replacing the handset on the
base or charger. If switched off,
and press
Press
to save.
to return to
you have to press
up.The default setting is On.
to hang
5
standby.
1
Press
, scroll
to
PERSONAL SET and press
8.3 Auto pick-up
.
When auto pick-up is switched
on, you can answer a call just by
lifting the handset off the base
or charger. If switched off, you
2
3
4
Scroll
UP and press
Scroll or
ON or OFF and press
to AUTO HANG-
.
to select
.
have to press
to answer a
Press
to return to
call.The default setting is Off.
standby.
1
Press
, scroll
to
PERSONAL SET and press
.
32
Personal settings
Download from Www.Somanuals.com. All Manuals Search And Download.
8.5 Display language
9 Advanced settings
1
Press
, scroll
to
PERSONAL SET and press
.
9.1 Recall time
2
3
Scroll
and press
Scroll
the language you want and
press
to LANGUAGE
This setting is useful to access
certain network and PABX/
switchboard services.The
default SE245 recall time is
suitable for your country and
network operator. It is unlikely
that you should need to change
this setting unless advised to
do so.
.
or
to select
to confirm.
to return to
4
Press
standby.
8.6 Keypad lock
Prevent accidental dialling while
carrying the handset by locking
the keypad.
Note
The use of your SE245 cannot
be guaranteed on all PABX.
1
Press and hold
.
1
Press
, scroll
to
The display shows KEYS
ADVANCED SET and press
LOCKED
.
.
2
To unlock the handset,
2
3
RECALL TIME is displayed.
press and hold
again.
Press
Scroll
.
Note
or
to select
While the keypad is locked, you
can answer incoming calls as
normal.
the setting you want,
SHORT MEDIUM or LONG
,
and press
Press
to confirm.
to return to
4
standby.
Advanced settings
33
Download from Www.Somanuals.com. All Manuals Search And Download.
9.2 Dial mode
Note
The default SE245 dialling mode If you switch Call barring
is suitable for your country
and network. It is unlikely that
you should need to change this
setting unless advised to do so.
on, BARR MODE ON will be
displayed on your screen in
standby mode.
1
Press
, scroll
to
9.3.1Switch call barring
on/off
ADVANCED SET and press
.
1
Press
, scroll
to
2
3
Scroll
and press
Scroll
to DIAL MODE
ADVANCED SET and press
.
.
or
to select
2
3
Scroll
to CALL
TONE or PULSE and press
BARRING and press
.
to confirm.
Enter the master PIN
4
Press
standby.
to return to
(default setting 0000) and
press
MODE is displayed.
.
4
5
Press
Scroll
.
9.3 Call barring
or
to select
Prevent certain numbers from
being dialled from your SE245.
Store up to four specific
numbers, each up to 4 digits
– for example, international or
local prefixes.
ON or OFF and press
to confirm.You can now set
the number (see below).
9.3.2Set a number to be
barred
Bypass call barring by switching
the setting Off or On.
1
Press
, scroll
to
ADVANCED SET and press
.
2
Scroll
to CALL
BARRING and press
.
34
Advanced settings
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Enter the master PIN
(default setting 0000) and
3
Enter the master PIN
(default setting 0000) and
press
Scroll
press
.
press
MODE is displayed. Press
Scroll or to select
.
to NUMBER and
4
5
.
.
NUMBER 1 is displayed.
ON or OFF and press
5
6
You can scroll
next number, if needed.
to the
to confirm.
6
Press
to return to
Press
and enter the
standby.
Note
digits you want to bar. Press
to confirm
If you switch Baby Call on,
7
Press
standby.
to return to
BABY CALL ON will be displayed
on your screen in standby
mode.
To switch Baby call off again :
9.4 Baby call
1
Press
.
When activated, this feature
allows you to dial a number
by pressing any key on your
2
OFF? is displayed. Press
to confirm.
handset (except
).This
feature is very useful for access 9.4.2Set the baby call
to emergency services.
number
Press , scroll
1
to
ADVANCED SET and press
9.4.1Switch baby call on
or off
.
2
3
Scroll down to BABY CALL
and press
Enter the master PIN
1
Press
, scroll
to
.
ADVANCED SET and press
.
(default setting 0000) and
2
Scroll
and press
to BABY CALL
press
Scroll
press
.
.
4
to NUMBER and
.
Advanced settings
35
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Enter the number.
If you wish to register
another manufacturer’s
handset, the instructions may
vary. In this case, please refer
to the manufacturer of the
additional handset.
Press
Press
to confirm.
to return to
standby.
9.4.3Dial a baby call number
1
When a baby call number
has been stored and the
baby call setting switched
on, press any key (except
) on the keypad to dial
the number.
• The Master PIN is required
before you can register or
unregister handsets.The
default PIN is 0000.
9.5.1Register a handset
Note
1
At the base, press and hold
for about 3 seconds.
The base station emits a beep
when it is ready to accept
registration.
When baby call is switched
on, you can still answer any
incoming call as normal.
Note
9.5 Registration
The base is able to accept
registration from a handset
within 90 seconds. If
is pressed, registration is
cancelled.
Up to 5 handsets can be
registered to one base station.
Additional handsets must be
registered to the base before
you can use them.
2
3
At the handset, press
and scroll
to
Notes
ADVANCED SET and press
• The instructions described
below apply specifically to
your Philips SE245 handset.
.
Scroll
to
REGISTRATION and press
.
36
Advanced settings
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
If necessary, scroll
REGIST. BASE and press
.
Enter the number of the
base on which you wish to
register your handset.
If you have only 1 base
2
3
Scroll
to
REGISTRATION and press
.
SELECT BASE is displayed.
Press
.
The available bases are
displayed with number of the
current base flashing.
Scroll
base you want – 1, 2, 3 or 4
– and press
station, press
have 2 base stations, press
or , etc.
The display shows
. If you
4
or
to the
.
SEARCHING
.
When the base is found
you hear a beep. If not
found, the display shows
When the handset registers
with the base, it is assigned
the next available handset
number (shown in the handset
display).
UNREGISTERED
.
9.5.3Unregister a handset
1
At the handset, press
and scroll to
9.5.2Select a base
You can register your SE245
handset with up to 4 bases.
Once registered, you can switch
between bases, for example,
bases at home and at work.
ADVANCED SET and press
.
2
3
4
Scroll
to UNREGISTER
and press
.
Enter the 4-digit master
PIN and press
Scroll or
.
1
At the handset, press
and scroll to
to the
handset you want to
unregister and press
ADVANCED SET and press
.
.
UNREGISTERED is displayed
on the handset screen.
Advanced settings
37
Download from Www.Somanuals.com. All Manuals Search And Download.
9.6 PIN
Note
The 4-digit master PIN is
used when registering or
unregistering a handset and
when changing some settings
on your SE245.The default
setting is 0000.You can change
this PIN for more secuirty
Entries stored in the
phonebook and new answering
machine messages are retained.
1
Press
, scroll
to
ADVANCED SET and press
.
2
3
4
Scroll
and press
CONFIRM? is displayed.
Press
Press
standby.
to RESET UNIT
1
Press
, scroll
to
.
ADVANCED SET and press
.
.
2
3
Scroll
.
to PIN and press
to return to
Enter the current master
PIN (default setting 0000)
and press
Enter the new PIN and
press
.
9.7.1Default settings
Handset name
Key tone
4
5
PHILIPS
On
.
Press
to return to
Auto pick up
Off
standby.
Auto hang up
Ringer melody
Ringer volume
On
Ring 1
Medium
3
Note
Make a note of your PIN. If you Earpiece volume
forget your PIN you will need
to reset your handset.
Phonebook
Call log
Redial list
Master PIN
Unchanged
Empty
Empty
0000
9.7 Reset
This will reset your SE245 to its Keypad lock
Off
default settings.
Clock
Alarm
00:00
Off
Dial mode
Tone
38
Advanced settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Answer Machine
On
7
Press
to return to
Answer Mode Answer & Record
Outgoing message Pre-defined
standby.
Ring delay
6
Remote Access
Handset screening
Base screening
On 9.9 Country setting
Off If you move to another country
On you can set your phone to be
compatible with the network
settings of that country.
9.8 Auto prefix
Note
You can set the SE245 to detect If you make a mistake during
a dialling number and replace it
with another number.You can
welcome mode country
selection, you can also reset
enter up to a 5 digit number to your country.
be detected and replace it with
a number of up to 10 digits.
Depending on your country, this
option may be displayed as NOT
AVAIL or your country may not
be displayed.
1
Press
, scroll
to
ADVANCED SET and press
.
2
3
4
Scroll
press
to PREFIX and
1
Press
ADVANCED SET and
press
Scroll
COUNTRY and press
Enter the 4-digit master PIN
and press
Scroll
the required country and
press to confirm.
, scroll
to
.
DETECT DIGIT is displayed.
Press
Enter the number you want
to be detected (max.5) and
press
Scroll to PREFIX NUM. and
press
Enter the number you want
it replaced with (max. 10)
.
.
2
3
4
to SEL.
.
.
.
5
6
or
to display
.
and press
.
Advanced settings
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete current message
during message playback.
Long press to delete all
messages whenTAM is in
standby mode.
Increase speaker volume
during message playback.
Decrease speaker volume
during message playback.
10 Using your
answering
machine
Your SE245 answering machine
records unanswered calls when
it is activated. It can store up
to 59 messages within the
maximum recording time of
12 minutes. Each message can
be up to 3 minutes long.Your
personal outgoing messages can
be up to 1 minute long.
10.2 Switch on/off
1
Press
scroll
to
ANSW MACHINE and press
.
2
3
Scroll
and press
Press
to ANSW ON/OFF
or
to display
10.1 SE245 base answering
machine control keys
ON or OFF and press
.
Press to turn the
10.3 Play messages
answering machine on/off.
Play new messages
Press and hold to play all
stored messages.
Press to stop playback.
Skip to the next message
during message playback.
Replay current message
Press twice to skip back
to previous message.
1
Press
scroll
to
ANSW MACHINE and press
.
PLAY is displayed. Press
to play new messages.
The display shows the number
of new messages. If there are
no new messages, all stored
messages are played.
2
40
Using your answering machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
to display the
Note
callers identification. Press
again to see the date
and time of the call.
Note
If you have not subscribed
to the Caller Line
Identification this option
is not available.
If you have not subscribed
to the Caller Line
Identification this option
is not available.
4
Press
to stop playback
and return to standby.
This also applies for
memo recordings.
10.4 Delete all messages
1
Press
scroll
to
ANSW MACHINE and press
3
During playback press
.
to display a list of options.
2
2
Scroll
and press
CONFIRM? is displayed.
Press to confirm.
to DELETE ALL
Use the
to change the options :
REPEAT – press to
and
keys
.
•
repeat current message
NEXT MESSAGE – press
to play next message
PREV MESSAGE – press
to play previous
•
•
10.5 Record a memo
You can record a memo which
is stored on your answering
machine and played back like a
normal message.
message
•
•
DELETE – press
to
delete the current message.
SAVE NUMBER – press
1
Press
scroll
to
to store the number, if
ANSW MACHINE and press
available, in the phonebook.
.
2
Scroll
MEMO and press
Display shows RECORDING
to RECORD
.
.
Using your answering machine
41
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Speak your message.
Press to end recording.
1
2
Press
scroll
to
ANSW MACHINE and press
.
Scroll
to ANSWER
10.6 Outgoing messages
This is the message your callers
hear on the answering machine.
There are two pre-recorded
outgoing messages, or you can
record your own.
MODE and press
The current answer mode is
displayed.
.
3
4
Scroll
or
to select
ANSWER & RECORD or
ANSWER ONLY and press
Scroll
or
to display
10.6.1 Answer & Record
The caller can leave a message.
The pre-recorded message is
“This is an answering machine,
please leave your message after
the tone.”
the message type you want :
PERSONALISED to set your
own recorded message or
PREDEFINED for the pre-
recorded message.
5
Press
to confirm.
If you select
PERSONALIZED, see
following paragraph.
10.6.2 Answer Only
The caller can listen to your
announcement but cannot leave
a message.The pre-recorded
message is “This is an answering
machine, please call back later”.
10.6.4 Record, play or
delete your own
outgoing message
Answer & Record invites your
callers to leave a message.
Answer Only lets callers hear
your announcement but they
cannot leave a message.
10.6.3 Set answer mode
Set your machine to Answer &
Record or Answer Only.
42
Using your answering machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Press
scroll
to
10.7 Answer machine
settings
ANSW MACHINE and press
.
2
3
Scroll
MODE and press
Scroll or
ANSWER & RECORD or
ANSWER ONLY and press
to ANSWER
10.7.1 Ring delay
.
Select the number of rings
before your answering machine
picks up the call. Choose from
2 – 9 rings orToll Saver.
Note
to select
.
Use the
or
key to
IfToll Saver is selected, then :
select PERSONALISED then • If you have new messages
press
.
your phone answers after
2 rings.
4
PLAY is displayed. Press
Current message is
played back.
.
• If there are no new messages
it will answer after 6 rings.
So you have the option to
hang up, saving the time and
cost of a call.
• If the memory is full, it will
answer after 10 rings in
Answer Only mode.
• Scroll
to select
RECORD MESS – press
Display shows RECORDING
and a beep is emitted.
Speak your message.
.
Press
to end recording.
•
DELETE – press
.
The pre-recorded message will
be automatically reinstated.
1
Press
scroll
to
ANSW MACHINE and press
5
Press
to confirm.
.
2
3
4
Scroll
to ANSW
SETTINGS and press
RING DELAY is displayed.
.
Press
Scroll
.
or
to select
the number or rings – 2-9
or TOLL SAVER.
Using your answering machine
43
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press
to confirm.
10.8.1 Remote Access
activated/deactivated
1
Press
scroll
to
10.8 Remote access
ANSW MACHINE and press
Remote access allows you
to operate your answering
machine and listen to your
messages by calling your SE245
from another phone.
.
2
3
4
Scroll
SETTINGS and press
Scroll
and press
Scroll
to ANSW
.
to REMOTE ACC
.
The default setting is activated.
or
to
select ACTIVATED or
1
2
Call your SE245. When
you hear your outgoing
message, press #.
Enter your 4 digit PIN.
The default code is 0000.
DEACTIVATED.
5
Press
to confirm.
10.9 Call screening
You hear a confirmation beep. Use your handset or base
Note
Change this code for
speaker to hear a caller leaving
a message.You can then choose
increased security, see ‘PIN’, to ignore the caller or pick up
on page 38.
the call.
3
After entering your PIN,
as stated above, use the
keypad to operate your
SE245 answering machine :
The default settings are :
• Handset call screening : Off
• Base call screening : On.
Play all messages
Play previous message
Play next message
Delete message playing
Switch answer machine on
Stop playback
2
1
3
6
7
8
9
At the handset :
1
If you want to interrupt and
take the call press
or
.
Switch answer machine off
44
Using your answering machine
Download from Www.Somanuals.com. All Manuals Search And Download.
At the base :
3
4
5
Scroll
SCREENING and press
Press
ON or OFF.
to BS
1
When a caller is leaving a
message, press or
.
or
to select
to adjust the volume to
listen to your caller.
Press
to confirm.
2
To interrupt and take the
call on the handset, press
or
.
10.10 Memory full
The memory is full if there
is less than 15 seconds of
recording time left or if the
maximum total of 59 messages
has been reached.
10.9.1 Switch handset call
screening on/off
1
Press
scroll
to
ANSW MACHINE and press
When the memory becomes
full :
.
2
3
4
5
Scroll
to ANSW
SETTINGS and press
to HS
SCREENING and press
• The LED indicator on the
base flashes quickly.
.
Scroll
•
flashes quickly on the
handset display.
.
Scroll
ON or OFF
Press
or
to select
• The machine will
automatically switch to
Answer Only mode.
.
to confirm.
If the memory becomes full
while a caller is leaving a
message, they will hear a beep
and the call is ended.
10.9.2 Switch base station
call screening on/off
1
Press
scroll
to
ANSW MACHINE and press
.
2
Scroll
to ANSW
SETTINGS and press
.
Using your answering machine
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Remove the old batteries
11 Maintenance and
replacement
11.1 Cleaning
• Simply clean the handset and
base with a damp(not wet)
cloth, or an anti-static wipe.
• Never use household polish
as this will damage the
product.
3
Place the new batteries in
the handset
• Never use a dry cloth as this
may cause a static shock.
11.2 How to replace the
battery
Warning
Always use AAA rechargeable
batteries.
4
Replace the battery cover
1
Slide off the battery cover
46
Maintenance and replacement
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery type
12 Technical data
The batteries that are used on
your SE245 are AAA NiMh
550mAh.
Battery life and range
Talk time and stand-by time
When the battery is fully
charged, the talk time of
your SE245 is approximately
Out of range warning
In ideal conditions the range of
the phone is up to 50 metres
10 hours and the stand-by time indoors and 300 metres
is approximately 150 hours.
outdoors. When you are
getting close to being out of
range during a call, the handset
gives a warning beep.
Low battery warning
The battery level is shown
in the top left of the handset
display.
When the battery level
becomes low, you hear a beep
once every minute (during a
If the handset moves outside
this range, the handset gives
and error beep, the call is lost
and some other functions will
not be available.You will hear
an error beep if you try to use
them, provided the error beep
is switched on.
call) and the
icon flashes.
If the battery level becomes
exceedingly low, the phone
automatically switches off
shortly after the alert.
When you come back in range
of the base, the handset gives
another beep.
The approximate power levels
of your battery are :
Fully charged.
Partially charged.
Running low.
Technical date
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• You are too far from the base
– move closer to the base.
• Wrong line cable – use the
line cable provided.
13 Frequently asked
questions
is not connected to the
Charging
line cord – connect the line
adaptor (when needed) to
the line cord.
The icon is not blinking
when the handset is placed
on the base
Poor audio quality
• Bad battery contact – move
the handset slightly.
The base is too close to
electrical appliances, reinforced
concrete walls or metal
doorframes – move the base at
least one metre away from any
electrical appliances.
• Dirty contact – Clean the
battery contact with a cloth
moistened with alcohol.
• Battery is full – no need to
charge.
The
icon is blinking
• Handset is not registered
to the base – register the
handset to the base.
Calls
No dialling tone
• You are too far from the base
– move closer to the base.
• No power – check the
connections. Reset the
phone : unplug and plug back
in the mains.
No ring tone
The ring tone is deactivated.
• Batteries are empty – charge Increase the volume.
the batteries for at least
24 hours.
48
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller Line Identification
(CLI) service does not work
Check your subscription with
your network operator.
Registration
Unable to register another
handset
Maximum number of
Phonebook
5 handsets has been reached.
The display shows a scrolling
dash.You must unregister a
handset in order to register a
new one.
A phonebook entry cannot
be stored
The phonebook is full. Delete
an entry to free memory.
Interference
Display
Noise interference on your
radio or television
No display
• Try recharging or replacing
the batteries.
Your base or charger may be
too close. Move it as far away
as possible.
• Try disconnecting and
connecting the base power
supply and follow the
procedure to register a
handset (see page 36).
• Base may be busy with
Answering machine
Answering machine does
not record messages
another handset. Wait until it • Switch the answering
is available.
machine on.
• The memory may be full. Is
the base LED flashing quickly?
If so, you will need to delete
some messages.
Frequently asked questions
49
Download from Www.Somanuals.com. All Manuals Search And Download.
• Answer mode may be set to
Answer Only. Change the
mode to Answer & Record.
Cannot access messages
remotely
• Remote access may be
switched off.
• If wrong PIN is entered a
beep is played.You can enter
the PIN once again.
Cannot record outgoing
message
• The memory may be full. Is
the base LED flashing quickly?
If so, you will need to delete
some messages.
Answering machine stops
automatically
• The memory may be full. If
so, you will need to delete
some messages.
• The maximum message
length is 3 minutes.
50
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
D
14 Index
Delete all messages 41
Delete all phonebook
entries 23
A
Access the redial list 10, 27
Add entry to phonebook 22
Adjust earpiece volume 9, 18
Answer a call 9, 18
Delete an entry in
the call log 27
Delete a message 41
Delete a phonebook entry 23
Delete a redial list number 28
Display icons and symbols 11
B
Base overview 12
Box contents 8
E
Earpiece volume 9, 18
Edit a one-touch button
number 24
Edit a phonebook entry 23
End a call 19, 32
C
Caller identification 25
Call another handset 19
Call a number from
the call log 18
Call from the phonebook 17
Call network voicemail 20
Call waiting 17
F
Frequently asked questions 48
Change handset
H
ringer melody 31
Change one-touch phone
numbers 9, 24
Handset keys 9
Handset overview 9
Change ringer volume 30
Change system PIN 38
Charge batteries 15
Conference call 20
Connect the base 14
I
Identify your caller 25
Install batteries 15, 46
Index
51
Download from Www.Somanuals.com. All Manuals Search And Download.
L
Reset handset 38
Ring delay 43
Listen to your message 40
Lock the keypad 9, 33
Loudspeaker volume 12, 18, 44
S
Safety information 4
Save a call log number to
the phonebook 27
Save a redial number to
the phonebook 28
M
Make a call 17
Memory full 45
Menu navigation 13
Set date and time 29
Set dialling mode 34
Set prefix detect and
replacement dialling 39
Set recall (flash) mode 9, 33
Set ringer melody 30, 31
Set ringer volume 30
Switch answering machine
on/off 40
N
Navigate the menu 13
New message 12, 40
O
One-touch keys 9, 17, 24
Outgoing message 42
P
Switch answering machine on
remotely 44
Switch between internal and
external calls 20
Switch handset on/off 19
Switch key beeps on/off 31
Switch secrecy on/off 19
Page a handset 13
Pre-dial a number 17
Put a caller on hold to answer
a second caller 20
R
Record outgoing message 42
Recycle your phone 6
Redial the last number 27
Register a handset to a base 36
Reinstate pre-recorded
outgoing message 42
Remote access 44
T
Transfer an external call to
another handset 20
U
Unregister a handset 37
52
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
V
View a call log 26
View phonebook entries 21, 23
Index
53
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner.
Document order number : 3111 285 38022
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|