Pelco Sleep Apnea Machine C2453M D 2 06 User Manual

INSTALLATION/OPERATION  
Integrated Positioning  
System  
Remote Monitor Kit  
IPS-RMK  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Test the Handheld to Ensure It Is Ready for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Install the Monitor Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
How to Assemble the Remote Monitor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
How to Adjust the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
How to Control the Positioning System Using the Handheld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
PTZ Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
How to Upload Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
How to Download Software to the Handheld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
List of Illustrations  
1
2
3
4
IPS-RMK Remote Monitor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Battery Selection Switch Location and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Assembly Steps Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
5
6
7
8
9
10  
11  
12  
13  
14  
Assembly Steps Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Remote Monitor Kit Connected to an IPS-RDPE-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Remote Monitor Kit Connected to a Spectra III Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Remote Monitor Kit Connected to a Spectra Mini Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Monitor Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Handheld Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Spectra III Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
PTZ Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Handheld Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Enter Software Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Thank you for purchasing Pelco's IPS-RMK, the remote monitor kit designed to assist in the  
installation and servicing of Spectra IIISE/Spectra III, Spectra® Mini, Esprit®, or ExSitesystems.  
Use the remote monitor kit to observe video, verify operation of the PTZ controls, check the address  
and baud settings, and program the positioning system. Software upgrades can also be performed  
with Spectra III SE/Spectra III, Spectra Mini, and ExSite systems.  
The IPS-RMK is supplied with the following equipment:  
1
Carrying case (refer to Figure 1)  
1
1
1
1
1
2
5.9-inch TFT-LCD monitor  
Handheld loaded with the control/upload utility  
Serial cable for the handheld  
IPS-CABLE interface cable for the RJ-45 port of the dome system  
IPS-MINIADPT adapter cable for Spectra Mini dome system  
Straps  
1
1
Remote Monitor Kit Resource CD  
Handheld box  
1
1
1
Cradle  
Handheld software CD  
Handheld operation manual  
HANDHELD  
COMPARTMENT  
MONITOR  
COMPARTMENT  
CABLE  
POUCH  
Figure 1. IPS-RMK Remote Monitor Kit  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Getting Started  
Before using the remote monitor kit, do the following:  
1. Test the handheld to make sure it is ready for use.  
2. Install the batteries for the monitor.  
TEST THE HANDHELD TO ENSURE IT IS READY FOR USE  
Batteries and software for the handheld were installed at the factory before the IPS-RMK was  
shipped. Before using the remote monitor kit check the battery gauge of the handheld to ensure that  
the batteries are still functioning.  
To check the batteries refer to the operation manual supplied with the handheld.  
NOTE: The Spectra III, Spectra Mini, Esprit, and ExSite application programs are installed on the  
handheld at the factory. If the batteries of the handheld are functioning, the handheld should be ready  
for immediate use.  
6
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL THE MONITOR BATTERIES  
The battery pack located on the back of the monitor holds 8 AA or 10 NiCad rechargeable batteries  
(batteries not included). To install the batteries, do the following:  
1. Remove the mointor from the monitor compartment of the IPS-RMK (refer to Figure 1).  
2. Press the tab located on the bottom of the battery pack of the monitor (refer to Figure 2).  
3. Gently lift the battery back.  
4. Install batteries.  
5. Set the battery selection switch (refer to Figure 3).  
6. Reinstall the battery pack onto the monitor.  
WARNING: Never use a DC power supply when batteries are installed.  
PRESS TAB AND  
LIFT TO REMOVE  
BATTERY BACK.  
Figure 2. Battery Compartment  
LINE X 8EA  
AD X 1OEA  
SET THE  
BATTERY  
SELECTION  
SWITCH  
ALKALINE X 8EA  
NICAD X 1OEA  
= ALKALINE  
= NICAD  
Figure 3. Battery Selection Switch Location and Settings  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
How to Assemble the Remote Monitor Kit  
Refer to Figure 4 for the following steps.  
Lift the handheld compartment.  
Open the bottom flap of the cable pouch. Pull the serial cable for the handheld out through the  
bottom of the pouch and connect to the bottom of the handheld. Secure excess cable and place  
back into pouch.  
Open the top flap of the cable pouch. Pull the BNC connector out through the top of the pouch.  
Connect to the VIDEO IN connector located on the top of the monitor.  
Pull the interface cable (IPS-CABLE) out of the pouch, and plug the RJ-45 connector into the RJ-45  
port of the Spectra III SE/Spectra III or IPS-RDPE-2 remote data port.  
If you have a Spectra Mini dome, remove the IPS-MINIADPT adapter cable from the pouch.  
Connect the RJ-45 connector to the mating connector on the IPS-CABLE. Remove the trim ring  
and lower dome from the Spectra Mini dome by prying down on the trim ring at one of the Pelco  
logos. Plug the six-pin connector on the adapter cable into the mating connector on the dome.  
Figure 4. Assembly Steps Through ᕤ  
8
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer to Figure 5 for the following steps.  
Open the monitor compartment. Connect the top flap to the side flap. This will reduce the glare  
of the sun on the monitor when using the kit outdoors. This step is not required if there is no glare  
on the monitor.  
Fold the loose part of the bottom flap under and attach to the Velcro®.  
Open the handheld compartment. Attach the two side Velcro strips to the Velcro strips on the  
monitor compartment. This will support the handheld during use.  
Attach the side flaps of the handheld compartment to the top and bottom flaps. Refer to Figure 6,  
Figure 7, and Figure 8 for final views of the kit assembly.  
Figure 5. Assembly Steps Through ᕨ  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Figure 6. Remote Monitor Kit Connected to a IPS-RDPE-2  
Figure 7. Remote Monitor Kit Connected to a  
Spectra III Dome  
Figure 8. Remote Monitor Kit Connected to a  
Spectra Mini Dome  
10  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Adjust the Monitor  
Figure 9. Monitor Controls  
NTSC/PAL switch: Set the NTSC/PAL switch to the correct setting for your location.  
Manual/Auto switch: Select Auto to use the preset standard color adjustment. Set to Manual  
to set the color, tint, and brightness manually. Color, tint, and brightness controls cannot be  
adjusted manually if the switch is set to Auto.  
ON/OFF switch: Do not leave the monitor ON when it is not being used. Battery life is 2.5 to 3  
hours.  
Tint: Turn the button up to increase greenish tones in the picture and down to increase the  
reddish tones in the picture.  
Color: Turn the button up to increase the color saturation level and down to decrease the color  
saturation level.  
Bright: Turn the button up to increase brightness and down to decrease brightness.  
DC 12 VDC jack: Power jack for optional 12 VDC power supply not included.  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
How to Control the Positioning System Using the  
Handheld  
The Spectra III, Spectra Mini, Esprit, and ExSite utilities are installed on the handheld contained in  
this kit. The handheld is ready for immediate use.  
Before using the handheld to control a system, know how to operate the handheld. For instructions  
on how to operate the handheld, refer to the manual shipped in the handheld box.  
1. Turn the handheld ON.  
2. Tap the application icon.  
APPLICATION  
ICON  
Figure 10. Handheld Main Menu  
3. Select the protocol for the system and then enter the system address.  
IMPORTANT: The handheld will not operate systems using P protocol address 1. To control the  
system with the handheld, change the P address to 2 or higher.  
DOME  
ADDRESS  
SELECT  
PROTOCOL  
PTZ  
BUTTON  
Figure 11. Spectra III Menu  
NOTE: If you normally use Coaxitron®, you may need to assign a D protocol address to use the  
interface cable (IPS-CABLE).  
4. Tap the PTZ button.  
12  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PTZ CONTROL MENU  
OPEN (Iris Open): Tap the OPEN button to make a selection.  
CLOSE (Iris Close): Tap the CLOSE button to cancel a selection.  
NEAR (Focus Near): Tap the NEAR button to focus near.  
FAR (Focus Far): Tap the FAR button to focus far.  
IN (Zoom In): Tap the IN button to zoom near.  
OUT (Zoom Out): Tap the OUT button to zoom far.  
PGM (Preset 95) - Tap the PGM button to access the programming menu for the dome system. Refer  
to the operation and programming manual supplied with Spectra III SE/Spectra III dome, Spectra Mini  
dome, or ExSite system.  
CONTROLLER  
MENU  
Figure 12. PTZ Control Menu  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
How to Upload Software  
Operating software and language files can be uploaded to a Spectra III Series, Spectra Mini, or ExSite  
system. The latest version of the control/upload utility is installed on the handheld. To upload future  
revisions, refer to How to Download Software to the Handheld.  
To upload software using the IPS-RDPE-2 remote data port the following software must be installed:  
Spectra III dome drive must have operating software version 1.2 or higher installed.  
ExSite explosionproof system must have operation software version 1.13 or higher installed.  
NOTE: Software and language files cannot be uploaded to an Esprit system.  
Perform system upgrades only when necessary. Software upgrades do not need to be performed if the  
system is operating properly.  
WARNING: To prevent damage to the system, never cycle power or attempt control of the  
unit during the upload process. The upload process is not complete until the system reboots  
and the 'Configure Done' message appears on the monitor.  
1. Assemble the remote monitor kit. Refer to How to Assemble the Remote Monitor Kit.  
2. Tap the application icon.  
APPLICATION  
ICON  
Figure 13. Handheld Main Menu  
14  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Enter the name of the software title where the blinking cursor appears on the screen.  
SOFTWARE  
FILE NAME  
INDICATES  
UPLOAD IS  
COMPLETE  
UPLOAD  
BUTTON  
Figure 14. Enter Software Title  
4. Tap the Upload button. The software upload starts.  
5. Wait until "Done" appears on the screen before unplugging the RJ-45 cable.  
WARNING: Do not cycle power to the system during the upload process. The "Done"  
message on the handheld indicates only that the first part of the upload is done. The upload  
process is not complete until the system reboots and the "Configure Done" message appears  
on the monitor.  
HOW TO DOWNLOAD SOFTWARE TO THE HANDHELD  
1. Download the latest application software from the Remote Monitor Kit Resource CD or  
2. Use the HotSync® function to install the software file onto the handheld. Refer to the  
manual supplied with the handheld for instructions on how to perform a HotSync  
operation.  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Troubleshooting  
Error Message  
Explanation  
Please Choose a File To Upload No file was specified before clicking Upload.  
File Not Found  
The file specified is not on the handheld device. Go to the handheld  
information screen to verify the file exists. Use the HotSync function to  
install the software file to the handheld and try again.  
Error Opening Port  
Error Opening Serial Library  
The program cannot open the COM 1 port. Another application may be  
using the port. Close the other application, or perform a soft reset to  
reset the port.  
The serial library cannot be found. Verify that it is installed by going to  
handheld information screen. Palm OS version 3.5 compatible software  
should be installed on the device.  
Timeout  
The system is not responding to the download. Check all physical  
connections and try again.  
Erase Failure  
The positioning system fails to erase the flash memory before loading  
the new software. This is an error received from the positioning system  
and is not from the loader software. Cycle power to the positioning  
system . Upload the software to the positioning system one more time.  
If the message appears again, there may be a problem with the  
positioning system. Contact Pelco's Product Support Department.  
Program Failure  
The positioning system failed to program the flash memory with the  
new software. This is an error received from the positioning system  
and is not from the loader software. Cycle power to the positioning  
system. Upload the software to the positioning system one more time.  
If the message appears again, there may be a problem with the  
positioning system. Contact Pelco's Product Support Department.  
Memory Allocation Failure  
Termination Received  
An Unknown Error Occurred  
The positioning system failed to allocate memory correctly during the  
download process. This is an error received from the positioning  
system and is not from the loader software. Cycle power to the  
positioning system. Upload the software to the positioning system one  
more time. If the message appears again, there may be a problem with  
the positioning system. Contact Pelco's Product Support Department.  
The positioning system received a command instructing it to stop  
downloading. This is an error received from the positioning system  
itself and is not from the loader software. Cycle power to the  
positioning system. Upload the software to the positioning system one  
more time. If the message appears again, there may be a problem with  
the positioning system. Contact Pelco's Product Support Department.  
An unknown error occurred. This is an error received from the  
positioning system and is not from the loader software. Cycle power to  
the positioning system. Upload the software to the positioning system  
one more time. If the message appears again, there may be a problem  
with the positioning system. Contact Pelco's Product Support  
Department.  
16  
C2453M-D (2/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
IPS-RMK  
Handheld  
Size  
Weight  
4.7" H x 3.1" W x .7" D (11.9 x 7.9 x 1.8 cm)  
4.4 oz (.20 kg)  
Memory  
Battery  
Display  
Expansion  
Operating System  
HotSync®  
Software  
8 MB  
2 AAA batteries  
Advanced LCD with backlight  
Serial port  
Palm OS compatible, version 3.5 or higher  
Serial cradle  
Spectra III Programming, PTZ control, and HotSync technology for  
local and remote synchronization with your PC  
Monitor  
Display  
Backlight  
5.6" diagonal, TFT-LCD, active matrix  
Built-in (CCFT)  
Input Signal  
Dot Format  
Dot Pitch  
NTSC/PAL (selectable)  
960 (H) x 234 (V) dots  
0.120 mm (H) x 0.360 mm (V)  
200 cd/m2 (Nit)  
224,640 dots  
100:1  
40°/40°/10°/30°  
Stripe  
12-15 VDC, 1 A  
6.5 W  
Brightness Rating  
Number of Pixels  
Contrast Ratio  
Viewing Angle L/R/T/B  
Pixel Configuration  
Power Requirements  
Power Consumption  
Battery Pack  
Holds 8 AA or 10 NiCad, rechargeable batteries (batteries not  
included)  
Battery Life  
Approximately 2.5 hours  
1.0 Vp-p (positive) 75 ohms  
23° to 104°F (-5° to 40°C)  
-13° to 108°F (-25° to 60°C)  
Input Signal Level  
Operating Temperature  
Storage Temperature  
Connectors  
Video In/Out  
DC Input Power  
BNC, female  
2.1 mm jack  
Unit Weight  
Shipping Weight  
2.9 lb (1.3 kg)  
6 lb (2.7 kg)  
IPS-CABLE  
Connectors  
Receiver  
Video  
Control  
One RJ-45 serial interface connector  
One BNC, male connector  
One serial DB-9 female connector (mating cable required for Palm  
OS-compatible handheld and iPaq PC applications)  
48" (122 cm)  
Length  
IPS-MINIADPT  
Connectors  
One RJ-45 serial interface connector  
One 6-pin serial interface connector  
Length  
6.25” (15.87cm)  
C2453M-D (2/06)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of  
shipment.  
Exceptions to this warranty are as noted below:  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and  
MC3651H-2X camera models, which have a five-year warranty.  
Three years on PMCL 200/300/400 Series LCD monitors.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The lamp and color wheel will be covered for a period of  
90 days. The air filter is not covered under warranty.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, EnduraSeries distributed network-based video  
products, and TW3000 Series twisted pair transmission products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight  
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this  
warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s  
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products  
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state  
to state.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and  
provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization  
number (CA number if returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate  
address below.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
This equipment contains electrical or electronic components that must be recycled properly to  
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical  
and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this  
equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REVISION HISTORY  
Manual #  
C2453M  
C2453M-A  
C2453M-B  
C2453M-C  
C2453M-D  
Date Comments  
7/02 Original version.  
4/03 Added Esprit and IPS-RDPE-2 information.  
1/04 Revised per ECO# 03-9497 for software revision.  
7/05 Added ExSite system information.  
2/06 Added Spectra Mini system information.  
Pelco, the Pelco logo, Spectra, Genex, Coaxitron, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.  
Velcro is a registered trademark of Velcro Industries.  
HotSync and Palm OS are registered trademarks of Palm, Inc.  
ExSite, Spectra III, and Spectra III SE are trademarks of Pelco.  
DLP is a registered trademark of Texas Instruments, Inc.  
Palm is a trademark of Palm, Inc.  
© Copyright 2006, Pelco. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East  
|
|
|
|
|
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Car Stereo System MCM2150 User Manual
Philips CD Player AZ1839 User Manual
Pioneer DJ Equipment SEP C1 User Manual
Polar Watch FT60 User Manual
Powermatic Planer 201HH User Manual
Praktica Digital Photo Frame D00447 User Manual
Pride Mobility Mobility Aid 1170XL Plus 2VHD 1170XL Plus 3VHD User Manual
Prince Castle Kitchen Utensil 943 Series User Manual
ProForm Home Gym 831237431 User Manual
PVI Industries Water Heater PV500 43 User Manual