SOFTWARE ENTERTAINMENT CONTROLLER
SEP-C1
DJS Control Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Chapter 1 Controlling DJS
It is necessary to install the driver software before connecting a SEP-C1 to your
computer. Please do not connect the SEP-C1 to your computer until you have finished
installing the driver software.
For information on how to install the driver software, please refer to “ABOUT THE
DRIVER PROGRAM” in the Operating Instructions of your SEP-C1.
Warning!
Updating your Version of DJS
In order to use your SEP-C1 in conjunction with
DJS, it is necessary to update DJS to version
1.600 or later. Please refer to the DJS User’s
Manual for directions on how to update your
version of DJS.
When 2 or more SEP-C1s are connected
If you connect two or more SEP-C1s to your computer, only the first SEP-C1 will be
able to operate DJS.
1-1 Connecting to your SEP-C1 to a computer
Warning!
Connect the SEP-C1 to your computer with a USB cable and a USB auxiliary power cable. For
information on each of the cables that come with the SEP-C1 as well as each type of the SEP-C1’s
cable jacks, please refer to “CONNECTIONS” in the operating instructions of your SEP-C1.
SEP-C1 Power Supply
The power for the SEP-C1 is supplied from a
USB port on your computer. Connect the USB
cable and USB auxiliary power cable directly to
your computer’s USB ports. Do not connect them
to a USB hub or any other kind of USB splitter.
1 Connect the 5V connector on the back of your SEP-C1 to the USB
port on your computer with a USB auxiliary power cable.
Starting up DJS
Start up DJS after making the connections to the
of your SEP-C1.Also,take care to close DJS
before disconnecting of your SEP-C1.
2 Connect the PC connector on the back of your SEP-C1 to the USB
port on your computer with a USB cable.
3 Start up your computer.
• It is also possible to start up your computer first and then make the connections to
your SEP-C1.
DJS Ver. 1.601
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1-2 Operating a DJS Player
You can use your SEP-C1 to operate either Player A or Player B on the [DJ Play] screen.
Note
Spin (when in scratch mode)
1 Start up DJS.
If you spin the jog dial of your SEP-C1 very
quickly, even after you let go of it, it will continue
playing at the speed and in the direction that the
jog dial is rotating until it stops. You cannot do
this spin play with the mouse.
• Once DJS starts up, the [DJ Play] screen is displayed.
2 Operate either Controller A or Controller B.
• When you operate the various controls on your SEP-C1, such as the jog dial or the
tempo control slider, it operates the player in the [DJ Play] screen.
Simultaneous Operations
The following operations can be performed at the
same time from the SEP-C1.
・If you rotate the jog dial while holding down
the SEARCH button, it accelerates the search
play speed.
・While playing a cue point sample, if you hold
down the CUE button, you can operate controls
like the jog dial or the PITCH BEND button.
・When playing a cue point sample, if you hold
down the CUE button and the press the PLAY
button, even if you let go of the CUE button, it
keeps on playing without returning to the cue
point.
Controller B
Controller A
・When playing a cue point sample, if you hold
down the CUE button and press a loop
operating button (IN/CUE), the playback point
is recorded as the cue point. When you release
the CUE button, it returns to the cue point and
stands by.
・When you are in the SCRATCH JOG mode, if
you hold down the jog dial and press the CUE
button, the playback point is recorded as the
CUE point. When you release the jog dial, it
returns to the cue point and stands by.
・When in the SCRATCH JOG mode, if you hold
down the jog dial and press a loop operating
button (IN/CUE), the playback point is
recorded as the cue point. Even when you
release the jog dial, it continues playing
without returning to the CUE point.
Functions that are Linked with the [DJ Play] Screen (Player Functions)
SEP-C1 Operation Buttons
PLAY/PAUSE
CUE
Controls Linked on the [DJ Play] Screen
PLAY/PAUSE Button
CUE Button
SEARCH
SEARCH Buttons
TRACK SEARCH
TIME/A.CUE
TRACK SEARCH Buttons
TIME MODE / AUTO CUE Button
IN/CUE Button
IN/CUE
OUT/ADJUST
RELOOP/EXIT
MASTER TEMPO
OUT/ADJUST
RELOOP/EXIT
MASTER TEMPO Button
TEMPO Control Range Button
TEMPO Control Slider
Jog Dial
Unlinked Player Functions
The following SEP-C1 buttons do not link up with
the [DJ Play] screen.
・CUE/LOOP MEMORY Button
・CUE/LOOP CALL Button
・JOG DIAL Button
TEMPO ±6/10/16/WIDE
TEMPO
JOG (–REV/+FWD)
PITCH BEND
PITCH BEND Button
SCRATCH Button
SCRATCH
・EJECT Button
For information on functions of buttons, please refer to “Parts and Their Functions”
in the SEP-C1 operating instructions and in the DJS User Manual.
DJS Ver. 1.601
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1-3 Operating a DJS List
You can use the SEP-C1 to operate track lists or play lists on the [DJ Play] screen.
Note
3 Function Buttons (6) :
- [ All ]
Track Lists and Play Lists
1
BROWSE button
The format of music lists can be switched on the
[Play Style] settings screen in DJS Preferences.
On the settings menu on the left hand side of
Preferences, click [Play Style] to open the [Play
Style] settings screen.
- [ (Category 1) ]
- [ (Category 2) ]
- [ (Category 3) ]
- [ (Category 4) ]
- [ (Category 5) ]
2 Center Display
BROWSE Button
If you press the BROWSE button, the BROWSE
screen is displayed in the center display.
4Select UP button
5 Select DOWN button
6
Rotary Selector
Function Button
In the [BROWSE] screen the function for directly
selecting and displaying a category is assigned.
7 LOAD A Button
8 LOAD B Button
1 Press the BROWSE button.
2 Operate the track list or play list.
• You can use the controls of your SEP-C1, like the function buttons, the rotary
selector, select DOWN or UP buttons to work with the track list or play list that is
displayed in the [DJ Play] screen.
Connect the USB port on the back of your SEP-C1’s control unit to a USB port on
your computer with a USB cable.
Note
Selecting a category (only with track lists)
Display of Category Columns
The headers that are displayed at the top of the category column in the track list
on the [DJ Play] screen, namely [All] and the five categories, are automatically
assigned to the six function buttons. When you press a function button, the songs
in the corresponding category are displayed.
The category columns on the [DJ Play] screen are
displayed in the order of [All], [Artist-Album],
Top Category and Other Categories.
The display order of the Top Category can be
switched by dragging and dropping it on the [DJ
Play] screen.
Aligning the selected line with the song you want to play
Vertical Scrolling
SEP-C1 Operation Buttons
Rotary Selector (Rotate)
Functions that are Linked with the [DJ Play] screen
Rotate it clockwise and the selected line moves downwards.
Rotate it counterclockwise and the selected line moves
upwards.
If you move the selected line to the top (or the
bottom), the list will scroll vertically and display
the selected line.
When using a play list
When the format of the music list is in Play List,
the line cannot be moved to the left or right. If you
press the select DOWN button, the list gets wider;
if you press the select UP button, the list gets
narrower.
Select DOWN button (Push)
Select UP button (Push)
Rotary Selector (Rotate)
If a list is closed, it opens the list.
If a list is open, the line moves to the right.
If a list is open, the line moves to the left.
If you move it to the last line on the left, it closes the list.
If the selected line is on a category, such as genre, artist/
album, etc., it displays the list of songs in the selected
category.
If the selected line is on a song, the three choices,
[CANCEL], [LOAD A] and [LOAD B] are shown on the
center display.
Note
3 After lining up the selected line on the song you wish to play, press
either the LOAD A or the LOAD B button.
• LOAD A Button (Loads a song) :
When using a play list
When the format of the music list is in Play List,
the selected song is loaded and goes into standby
mode.
The selected song is loaded onto DJS Player A.
• LOAD B Button (Loads a song) :
The selected song is loaded onto DJS Player B.
LOAD LOCK Settings
When the SEP-C1’s LOAD LOCK settings is ON,
songs cannot be loaded onto the player that is
currently playing. Songs can only be loaded when
the player is in either standby or paused. For
information on turning the LOAD LOCK setting
ON/OFF, please refer to “USING THE UTILITY”
in your SEP-C1 Operating Instructions.
Using the Rotary Selector
You can use the rotary selector dial for operations instead of pressing the LOAD A
or LOAD B buttons.
1 With the selected line on the song you wish to play, if you press the rotary selector,
the three choices [CANCEL], [LOAD A] and [LOAD B] are displayed in the
center
2 Rotate the rotary selector dial to select [LOAD A] (or [LOAD B]) and then when
you press the rotary selector dial, the selected song is loaded on Player A (or
Player B).
DJS Ver. 1.601
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1-4 Operating the DJS Mixer
You can use the SEP-C1 to operate the mixer on the [DJ Play] screen in DJS.
Note
DJS Mixer Functions (Internal Mixer)
2 Function Buttons (6) :
1 MIX Button
When you use the DJS mixer functions, it makes
the DJS settings on the internal mixer. For more
information, please refer to sections “1-1 Using
the DJS Mixer Function” and “8-4 Mixer and
Sound Card Settings” in your DJS User’s Manual.
-［CUT-IN］
-［ZIP］
-［ECHO］
-［CROSS FADE］
-［BPM SYNC］
-（EMPTY）
MIX Button
If you press the MIX button, the MIX screen is
displayed in the center display.
4 Select DOWN button
3 Select UP button
5
Rotary Selector
Function Buttons
On the [MIX] screen, four mix mode selections
and BPM sync are assigned.
6 LOAD A Button
7 LOAD B Button
When using an external mixer
1 Press the MIX button.
Only the BPM sync function can be used when
the DJS mixer is set to an external mixer.
2 Set the mixing parameters.
• Use the function buttons, select UP button, and select DOWN button to set up
mixing.
Note
Master & Slave
Functions that are Linked with the [DJ Play] Screen (Mix Functions)
The first player that starts playing is the master,
the other player becomes the slave. The master
and slave switch roles under the following
circumstances.
・When the cross fader is moved all the way to
the slave side
SEP-C1 Operation Buttons
Function [CUT-IN]
Functions that are Linked with the [DJ Play] screen
MIX Mode : CUT-IN
Function [ZIP]
MIX Mode : ZIP
Function [ECHO]
MIX Mode : ECHO
・When the master is paused while both players
Function [CROSS FADE]
Function [BPM SYNC]
MIX Mode : CROSS FADE
The playback speed for the slave is merged to that of the
master.
are playing together
・When the song on the master is changed while
both players are playing together
Select UP Button
BEAT ADJUST : Player A
BEAT ADJUST : Player B
BEAT Adjust
(Player A - Player B)
Select DOWN Button
While listening to the song being played, set the
beat location. Press either the select UP or the
select DOWN button on the first beat of a 4-count.
3 Press either the LOAD A or the LOAD B button.
• LOAD A Button (Start Mix or Auto Mix) :
Switching between MIX and AUTO
MIX
Toggle between Mix and Auto Mix by right-
clicking on either the [Mix] or the [Auto Mix]
button on the [DJ Play] screen.
Starts the cross fader in the [DJ Play] screen moving from the Player B side toward
Player A. When Player A is the master, it does not start moving.
While it is moving, if you decide you want to return in the other direction, press the
LOAD B button.
Mix
• LOAD B Button (Start Mix or Auto Mix) :
The cross fader moves in the specified number of
beats.
Starts the cross fader in the [DJ Play] screen moving from the Player A side toward
Player B. When Player B is the master, it does not start moving.
While it is moving, if you decide you want to return in the other direction, press the
LOAD A button.
Auto Mix
The cross fader moves in the specified number of
beats. During Auto Mix, the playback speed and
beat position of the slave are automatically
synchronized with the playback speed and beat
position of the master.
Specify the speed of cross fader movement (beats).
The cross fader movement speed (beats) can be specified for each mix mode. If
you press the rotary selector, the menu for selecting the possible beats is
displayed on the [DJ Play] screen; rotate the rotary selector to your selection and
then press the rotary selector.
Manual Operation of the Cross Fader
Instead of pressing the LOAD A or the LOAD B buttons, you can rotate the rotary
selector to manually move the cross fader. Rotating it clockwise moves the cross
fader’s slider to the right, counterclockwise to the left.
During a Mix or even an Auto Mix, you can rotate the rotary selector to move the
cross fader manually.
DJS Ver. 1.601
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1-5 Operating the DJS Effecter
You can use the SEP-C1 to operate the Effecter on the [DJ Play] screen in DJS.
Note
2 Function Buttons (6) :
EFFECT Button
-［INPUT SELECT］
-［DELAY/ECHO］
-［PAN/TRANS］
1
EFFECT Button
If you press the EFFECT button, the EFFECT
sscreen is displayed in the center display.
-［FILTER/FRANGER］
-［REVERB/PITCH］
-［AUTO/TAP］
Function Buttons
In the EFFECT screen, the eight effect selections,
channel switching and BPM display switching
are assigned.
4 Select DOWN button
3 Select UP button
Rotary Selector
When using an external mixer
The EFFECT screen cannot be used when the DJS
mixer is set to an external mixer.
5
6 LOAD A Button
7 LOAD B Button
1 Press the EFFECT button.
2 Set the effect parameters.
• Use the function buttons, LOAD A button, LOAD B button, select UP and select
DOWN buttons to make the settings.
Note
Channel Switching
Functions that are Linked with the [DJ Play] Screen (Effect Functions)
Select the channel for applying the sound effects,
from among channel A, channel B and the master.
SEP-C1 Operation Buttons
Function [INPUT SELECT]
Function [DELAY / ECHO]
Function [PAN / TRANS]
Functions that are Linked with the [DJ Play] screen
Switches Channels : Channel A, Channel B, Master
Select Effect : Delay / Echo
Effect Selection
You can select from the eight kinds of effects that
are assigned to the four function buttons.
Select Effect : Pan / Trans
Function [FILTER / FRANGER] Select Effect : Filter / Franger
BPM Display Switch
You can select a BPM (beat per minute) display
that is either AUTO or TAP.
Function [REVERB / PITCH]
Function [AUTO / TAP]
LOAD A Button
Select Effect : Reverb / Pitch
Switches BPM Display : AUTO / TAP
TAP Input
BPM (AUTO)
The BPM value that is detected in the song on the
selected channel is displayed.
LOAD B Button
TAP Input
Select UP Button
Effect Beat : Down
Effect Beat : Up
Select DOWN Button
BPM (TAP)
When you press either the LOAD A or LOAD B
button twice or more in succession, the interval
between presses is displayed as the BPM.
3 Operating with the Rotary Selector
• If you rotate the rotary selector, you can adjust the level and depth of effects
(balance between the original music on the selected channel and the sound effect of
the selected effect).
Effect Beat
The cycle (timing) of the sound effects, such as
reverb, transition and echo, is set based on the
displayed BPM. This cycle (timing) can be
adjusted using the select UP or the select DOWN
buttons. However, if the pitch is selected in the
effect selection, you can use the select UP or
select DOWN buttons to adjust the pitch.
• If you press the rotary dial, the effect comes ON and the sound effect is output on
the selected channel. Pressing it again makes the effect go OFF.
DJS Ver. 1.601
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Warning!
Chapter 2 Upgrading SEP-C1
The software that is originally incorporated into hardware products such as the
SEP-C1 and is used to control the hardware is called firmware.
Once you complete the DJS user registration process, you can update the version of
your SEP-C1’s firmware.
In Windows Vista
Follow the steps below to make the administrator
settings.
1. Log on as a user who has been established as
the administrator for the computer.
2. Right click the [DJS] shortcut icon on the
desktop and then click on [Properties].
3. Click the [Compatibility] tab in the [DJS
Properties].
Before registering the user and updating the firmware version…
4. Click on [Run this program as the
administrator.] so the check box is ON.
5. Click [OK] and then close the [DJS Properties]
window.
Log on to your computer as a user with administrator privileges and connect the
computer to the internet.
2-1 User Registration
Note
The trial period for using DJS without registering a user is 60 days. Once this period expires,
you will not be able to use DJS. So, please complete user registration within sixty days of
installing DJS. Once you complete user registration, support services such as version updating
After the Trial Period Ends
Once the 60 days elapse, DJS will not start up and
a message prompting you to register a user is
displayed.
1 After clicking [Help] on the DJS menu, click [User Registration].
• Once you click [User Registration], the [User Registration Selections] screen
opens.
Note
2 After the [User Registration Selections] screen opens, click [Online
Privacy Protection Policy
The personal information of our customers is
collected by the Pioneer Group for the
following purposes.
Registration] and then [Next].
• After you click [Next], the [Online Registration] screen opens.
sa
1. In order to provide after sales service on
purchased products.
2. In order to send our customers emails with
important information about our products or
related events.
3. In order to reflect the results of customer
questionnaires in our product design.
Pioneer maintains strict controls over the personal
information we collect from our customers, in line
with our Privacy Protection Policy. To view the
Pioneer Privacy Protection Policy, please visit our
privacy.html).
Offline Registration (Key Code
Display)
After you click [Offline Registration] and
[Display Key Code], when you click [Next], the
[Key Code] screen opens. Write the key code on
the User Registration Card and mail it.
If you don’t have internet access (Offline Registration)
If for some reason, such as not having internet access, you cannot register online,
please fill out the User Registration Card with your key code and the necessary
information and mail it in. After we receive your user registration card at our offices, we
will send you a registration ID so you can release the trial period.
Offline Registration (Entering the
Registration ID)
After you click [Offline Registration] and [Enter
Registration ID], when you click [Next], the
[Enter your Registration ID] screen opens. Please
enter the registration ID that we sent to you.
3 Fill in the required information on the [Online Registration] screens
and then click [Send].
• [Online Registration] consists of three screens, namely User Information 1/2, User
Information 2/2 and a Confirmation of Information screen.
• When you click [Send], the information you entered will be registered on our
server and the [Registration ID Complete] message will be displayed.
Warning!
4 After the [Registration ID Complete] message is displayed, click [OK].
User Information (Login Name and
Password)
• Once you click [OK], the [Registration ID Complete] message closes.
Please take care so you do not forget the Login
Name and Password you entered as user
information because you will need them in order
to receive service, such as for updating software
versions, etc.
DJS Ver. 1.601
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2-2 Updating the Firmware
You can use DJS to update the firmware of your SEP-C1 to the latest version.
In order to download the update package and run the update program, connect your
computer to the internet and Log on as a user who has been set up as a computer
administrator.
Warning!
In Windows Vista
Follow the steps below to make the administrator
settings.
1. Log on as a user who has been established as
the administrator for the computer.
2. Right click the [DJS] shortcut icon on the
desktop and then click on [Properties].
3. Click the [Compatibility] tab in the [DJS
Properties].
4. Click on [Run this program as the
administrator.] so the check box is ON.
5. Click [OK] and then close the [DJS Properties]
window.
Before Updating the Version of the Firmware
If you have not complete the user registration process, you will not be able to run the
updater for your SEP-C1.
Before starting up DJS, connect your SEP-C1 and your computer with an auxiliary USB
power cable and then connect the SEP-C1 and the computer with a USB cable.
When you have two or more SEP-C1s
Before connecting your SEP-C1
It is necessary to install driver software on your
computer. Please do not connect the SEP-C1 to
your computer until you have finished installing
the driver software. For information on how to
install the driver software, please refer to
“ABOUT THE DRIVER PROGRAM” in the
Operating Instructions of your SEP-C1.
It is not possible to update more than one SEP-C1 at a time. So please connect one
unit to your computer at a time.
Note
1 After clicking [Help] on the DJS menu, click [Version Up].
Login Name and Password
• Once you click [Version Up], it checks our server for whether there is an update
package or not; if there is, the [Update Package Detected] screen opens.
• If there is not an update package newer than the version currently being used, it is
not possible to update the software.
Once you access our server, you will prompted for
the Login Name and the Password you specified
when you registered as a user.
Note
2 After the [Update Package Detected] screen opens, click the [SEP-C1
Firmware] check box ON and then click [Yes].
Multiple Update Packages
If update packages other than the firmware for
your SEP-C1 are detected, such as for the DJS
software, the manual, SEP-C1 driver software,
and so on, they will be displayed all together in
the [Update Package Detected] screen.
• Once you click [Yes], the update package start downloading. Once the download
finishes, the [Starting Version Update] message opens.
If you click their check box(es) and select them,
the selected update packages are downloaded and
one update runs after another.
Update package detected when DJS
starts up
If you log on to your computer as a user with
administrator privileges and your computer is
connected to the internet and your SEP-C1 is
connected to your computer, every time you start
up DJS, it will check our server to see if there are
any update packages; if there are, the [Update
Package Detected] screen will open.
3 After the [Starting Version Update] message is displayed, click [OK].
• Once you click [OK], the update starts. Once the update finishes, the [Update
Complete] message opens.
Note
4 After the [Update Complete] message is displayed, click [OK].
Starting and Finishing Updates
• Once you click [OK], the [Update Complete] message closes.
If you selected more than one update package, the
Starting Update and Update Complete messages
are displayed repeatedly. If an update package for
DJS software is selected, DJS will close
5 After closing down DJS, remove both the USB auxiliary power cable
and the USB cable from your SEP-C1 and your computer.
temporarily and then start back up automatically.
Checking the Firmware Version
For information on how to check your SEP-C1’s
firmware version, please refer to “USING THE
UTILITY” in the SEP-C1 Operating Instructions.
If you fail to close down DJS and completely
disconnect your SEP-C1 and the computer, the
firmware upgrade will not take effect.
DJS Ver. 1.601
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3
„ Using the Support Site
Before contacting us about how to use DJS or with technical questions, please check the User’s Manual recorded on the DJS CD-ROM as well
as the FAQ on the DJS support site.
„To connect to the DJS support site, click [File] on the DJS menu and then click [Internet].
When using the DJS support site, it is necessary to enter the login name and password you specified when you registered as a DJS user.
„When using the DJS support site, please have the following details at hand when you contact us: customer’s name, product name,
installation key, model and specs of the computer (CPU, amount of memory, peripheral devices connected, etc.), version of the operating
system and a detailed description of the problem you are experiencing.
„We are only able to provide support for DJS users who have completed user registration. Please take care of the login name and password
you specified during user registration in the same way as the installation key and registration ID so you do not forget them.
* For information about installation of DJS or how to complete user registration, please refer to the User’s Manual that is recorded on
the DJS CD-ROM.
„If you experience difficulties in installing the software or completing user registration, please refer to our home page on the internet.
Information on Installation and User Registration
* If you have questions about your computer, peripheral devices or technical questions, such as about combinations with products
other than those we support, please check with the manufacturer of the device or contact the sales outlet.
„There are DJS version updates scheduled in order to improve the performance and add functionality. By completing the user registration,
you not only gain access to our support site, but it also allows you to download the updater program. By all means update your version of
DJS with this updater program so you can always have the latest version to use.
„ Trial Period and User Registration
DJS has a trial period, which lasts for 60 days after installing the software. This trial period is the length of time you can user DJS without
registering as a user. Once this trial period expires, you will not be able to enjoy using DJS anymore, so be sure to complete user registration
within 60 days of installing the software.
„Online user registration is available for our customers who are connected to the internet.
„If you do not have an internet connection, please fill out the required information on the oUser Registration Card and mail it in.
Precautions about Filling in the User Registration card
•A login name and a password are required in order to make sure of your identity when using our customer support service.
•Please specify an 8 to 10 digit alphanumeric login name and password in the appropriate columns on the user registration card.
•Please affix the Installation Key Sticker for User Registration in the Software Installation Key box on the user registration card.
•Please enter the language you selected when you installed DJS in the Software Language box on the user registration card. The 8
languages are English, French, German, Italian, Dutch, Spanish, Traditional Chinese and Japanese.
•Transfer the 8 digit alphanumeric code shown on the screen into the Key Code column of the user registration card.
•Please print neatly so it is possible to distinguish between 1 and 7, 1 and the letter I and between 2 and the letter Z. Also, please enter
the number 0 (zero) with a diagonal line so it may be distinguished from the letter O.
After we receive your user registration card at our offices, we will send you a registration ID so you can release the trial period.
DJS Ver. 1.601
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Addressing the User Registration Card
The addresses for user registration cards are as follows. Please take care to use the address appropriate to where you live
as each region has its own address.
North America
PIONEER ELECTRONICS (USA) INC.
BUSINESS SOLUTIONS DIVISION, PRO AUDIO GROUP
2265 East 220th Street, Long Beach, CA 90810, U.S.A
Europe
PIONEER EUROPE NV
MULTIMEDIA DIVISION
Pioneer House, Hollybush Hill, Stoke Poges, Slough SL2 4QP U.K.
South Asia, Southeast Asia
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
MULTIMEDIA DEPARTMENT
253 Alexandra Road, #04-01, Singapore 159936
Hong Kong
PIONEER (HK) LIMITED
SALES AND MARKETNG DEPARTMENT
Suite 901-906, 9th Floor World Commerce Centre, Harbour City 11 Canton Road, Tsim Sha Tsui Kowloon, Hong Kong
Taiwan
PIONEER HIGH FIDELITY TAIWAN CO., LTD.
SALES DIVISION, INDUSTRIAL ELECTRONIC SECTION
13F, No. 44, Sec. 2, Jhongshan N. Road, Taipei City, Taiwan
Oceania
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
Middle East, Africa
PIONEER GULF, FZE.
Lob 11-017, Jabel Ali Free Zone, P.O.Box 61226, Jabel Ali, Dubai, U.A.E.
Central & South America
PIONEER INTERNATIONAL LATIN AMERICA, S.A.
SALES DEPARTMENT
Plaza Credicorp Bank Panama, 50 Street, #120, 14th Floor
P.O. Box 0816-01361, Panama, Rep of Panama
Mexico
PIONEER ELCTRONICS DE MEXICO, S.A. DE C.V.
Blvd. Manuel Avila Camacho No. 138, Piso 10, Col. Lomas de
Chapultepec, Mexico, D.F. C.P. 111000 Deleg. Miguel Hidalgo
DJS Ver. 1.601
11
Download from Www.Somanuals.com. All Manuals Search And Download.
User Registration
Pioneer Use Only:Your Registration ID
Thank you for purchasing this PIONEER product! Please complete the following and address to PIONEER. Information indicated by
bold text is required for registration. When registered, we will send your Registration ID to you by mail. Do not forget these answers.
Login name
(at least 8 and not more than 10 characters)
Password
(at least 8 and not more than 10 characters)
Please paste Installation Key sticker
Software Installation Key
Software name and version number
Software language
Key Code
E-mail address
Pioneer collects information about our customers for the following purposes only.
1. To provide user support services.
2. To provide customers with information on products and events by e-mail.
3. To collect questionnaires, analyze them, and use the results for product planning.
* Private information collected from users is strictly protected in accordance with our Privacy Policy.
* Please see our policy for protecting your personal information, which may be found on our home page at
(http:// www.prodjnet.com/privacy.html).
PIONEER CORPORATION
Questionnaire
(Your answers will remain confidential and will be used to make product Improvements, so that we may better serve you.)
Male
Female
Dealer
Sex
Age
Your favorite club
(Location)
(Club)
Which of the following best describes yourself ? (Please select one)
Club DJ
Mobile DJ
Bedroom (Hobby) DJ
Owner (Shop type:
)
Other
year(s)
How long have you been engaged as a DJ?
What kind of music will you play on the DJS?
House
Trance
Jungle/Drum & Bass
Techno
Ambient
Hip-Hop/Rap
Break Beat
Jazz
Dance Classic
Garage
Rock
R&B
Alternative
Funk
Latin
Swing
Old School
Wave
Other
What magazines do you subscribe to?
How did you learn about this product?
Catalog
Show
Music instrument shop Audio shop
PC shop
Pioneer homepage
Other
Dealer's homepage
Friend
Magazine
Why did you decide to buy this product?
Price
Size
Function
Brand
Easy operation
Other
Reliability
Design
Thank you for your answers. Once the user registration is complete, we will send you a registration ID that will
allow you override the 60 day trial period. Please write your name, address and phone number below.
Last Name
First Name
Middle Name
Address
Country
State, Province
Telephone
Postal Code
FAX
Download from Www.Somanuals.com. All Manuals Search And Download.
|
