Pelco Home Security System MPS524DT 220 User Manual

®
MPS5DT, MPS524DT,  
MPS524DT/220  
Scanner Controls  
Installation/  
Operation Manual  
C545M-E (2/02)  
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108  
International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120 • DataFAX +1(559) 292-0435  
PelcoEurope BV • Dillenburg Center, Dillenburgstraat 7C • 5652 AM Eindhoven • The Netherlands  
Tel +31(40) 251-9870 • FAX +31(40) 251-9835  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed:  
1. Installation and servicing should only be done by Qualified Service Personnel and  
conform to all Local codes.  
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclo-  
sure, it is designed for indoor use only and it must not be installed where exposed to  
rain or moisture.  
3. Only use replacement parts recommended by Pelco.  
4. After replacement/repair of this unit’s electrical components, conduct a resistance  
measurement between line and exposed parts to verify the exposed parts and have  
not been connected to line circuitry.  
The product and/or manual may bear the following marks:  
This symbol indicates that dangerous voltage constituting a  
risk of electric shock is present within this unit.  
This symbol indicates that there are important operating and  
maintenance instructions in the literature accompanying this  
unit.  
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Please thoroughly familiarize yourself with the information in this manual prior to installation  
and operation.  
Pelco Manual C545M-E (2/02)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
The MPS5DT and MPS524DT Scanner Controls provide precise and reliable control of  
Pelco PS20 and PS20-24 Series Scanners. The controls can still be used with older scan-  
ner models such as Pelco PS7, PS7-24, PS30A, and PS30-24.  
An additional line is available to power the PS20 scanner and camera/enclosure eliminating  
the need for power at the scanner location.  
The front panel switches operate left and right control, and automatic scan control.  
These controls can be used as desktop models or up to three units can be rack mounted in  
a R300 Rack Kit.  
Use the RB24 Relay Box to extend the control’s operating distance up to 13,000 feet using  
16 AWG.  
MODELS  
MPS5DT  
Desktop control for 120 VAC scanners (PS20, PS30A) UL  
MPS524DT  
Desktop control for 24 VAC scanners (PS7-24, PS20-24, PS30-24) UL  
MPS524DT/220  
Same as MPS524DT except with 230 VAC input; Desktop control for  
24 VAC scanners (PS7-24, PS20-24, PS30-24) CE  
OPTIONS  
R300  
Rack mount kit. Up to three units can be racked horizontally in a single  
rack kit.  
RB115  
Low voltage relay box for use with 24 VAC control and 120 VAC scan-  
ners. Extends operating distance (control to relay box) up to 13,000  
feet using 16 AWG.  
RB24  
Low voltage relay box for use with 24 VAC control and 24 VAC scan-  
ners. Extends operating distance (control to relay box) up to 13,000  
feet using 16 AWG.  
4
Pelco Manual C545M-E (2/02)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
The following items are supplied:  
MPS5DT, MPS524DT, or MPS524DT/220  
6-pin mating connector with pins  
2 screws  
CONNECTOR ASSEMBLY  
The first thing you must do is assemble the mating connector. The following steps apply to  
all AMP style connectors regardless of pin size or pin number. Refer to Figure 1 during as-  
sembly.  
1. Slide the connector clamp assembly over the conductor cable.  
2. Determine the size of wire to use. Refer to the Specifications section.  
3. Prepare the wires from the conductor cable as follows:  
a. Strip at least 1" from the cable jacket to expose the wires. You may need to strip  
more from the cable jacket if you have more wires.  
b. Strip 1/8" from each wire.  
c. Using an AMP-style crimper, crimp the wires and their insulation to the connector  
pins. Refer to Detail A in Figure 1.  
4. Slide the connector pins into the appropriate holes in the connector body until they  
snap into place. You can see the pin assignments in Table A.  
Table A. PIN Assignments  
PIN  
FUNCTION  
Common/AC Low  
Right  
1
2
3
4
5
Left  
Auto  
NOTE: Pin 5 is not used  
with PS7 and PS30 Series  
Scanners.  
120 VAC HI for PS20 scanner and camera power or  
24 VAC HI for PS20-24 scanner and camera power  
8
Chassis Ground  
5. Push the connector clamp assembly towards the connector body and screw it onto the  
connector body. Be careful not to disturb the wires.  
6. Attach the appropriate clamp with the screws provided and tighten.  
1/8"  
1"  
FRONT VIEW  
OR  
3
1
7
4
8
11  
14  
12  
00103  
Figure 1. Connector Assembly  
Pelco Manual C545M-E (2/02)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPLETING THE INSTALLATION  
1. Attach the mating connector to the connector on the rear of the scanner control.  
2. Attach the other end of the cable to the scanner.  
3. Plug the power cord on the back of the scanner control into a 120 VAC outlet  
(MPS5DT and MPS524DT models) or a 230 VAC outlet (MPS524DT/220 model).  
OPERATION  
Turn the control on and test its operation using the following procedures:  
MANUAL OPERATION  
Move the rocker switch to the “MANUAL” position.  
When you move the other rocker switch to the “LEFT” position, the scanner pans to the left.  
When you move it to the “RIGHT” position, the scanner pans to the right.  
AUTO SCAN OPERATION  
Move the rocker switch to the “AUTO” position.  
The scanner pans to the right until it reaches its limit, then pans to the left.  
The scanner automatically continues right/left panning until the “MANUAL” switch is set  
again or the scanner is turned off.  
SPECIFICATIONS  
CONTROLS  
Left/Right:  
Rocker switch, LEFT/RIGHT  
Rocker switch, AUTO/MANUAL  
Rocker switch, ON/OFF  
Long life neon  
Auto Scan:  
Power:  
Pilot Lamp:  
ELECTRICAL  
Input Voltage  
MPS5DT, MPS24DT: 120 VAC, 50/60 Hz  
MPS524DT/220:  
230 VAC, 50/60 Hz  
Output Voltage  
MPS5DT:  
MPS24DT:  
120 VAC  
24 VAC  
24 VAC  
MPS524DT/220:  
Maximum Power  
Requirements:  
PS7-24 PS30-24 PS30A PS20 PS20-24  
MPS5DT  
17.5 VA 30 VA  
MPS524DT  
8.8 VA  
8.8 VA  
13 VA  
13 VA  
20 VA  
20 VA  
MPS524DT/220  
Fuse Protection  
MPS5DT:  
MPS524DT:  
1/4 ASB  
1/2 ASB  
MPS524DT/220:  
2/10 ASB  
6
Pelco Manual C545M-E (2/02)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Cord:  
Unit is supplied with grounded power cord (either U. S. Standard  
or Continental European Standard)  
Output Connector:  
Cable Requirements:  
Operating Distances:  
AMP CPC type, 14 pin (mate supplied)  
4 conductors for PS7/PS30 models and 6 for PS20/PS20-24 models  
The following are the recommended cable distances between the  
control and the listed scanners. The PS20 and PS20-24 are pow-  
ered locally and do not use power from the controller.  
20 AWG  
18 AWG  
16 AWG  
(0.5 mm2)  
(1.0 mm2)  
(1.5 mm2)  
745 ft  
(227 m)  
1185 ft  
(361 m)  
1885 ft  
(575 m)  
PS7-24  
PS30A  
PS30-24  
PS20  
2265 ft  
(690 m)  
3605 ft  
(1098 m)  
5720 ft  
(1743 m)  
115 ft  
(35 m)  
185 ft  
(56 m)  
295 ft  
(90 m)  
2,300 ft  
(701 m)  
3,700 ft  
(1,127 m)  
5,900 ft  
(1,798 m)  
5,600 ft  
(1,706 m)  
9,000 ft  
(2,743 m)  
14,300 ft  
(4,368 m)  
PS20-24  
NOTE: A relay box can be used to extend the maximum operating  
distance (control to relay box) to 13,000 feet using 16 AWG.  
GENERAL  
Construction  
Cover:  
Chassis:  
Panel:  
Steel, black polyester powder coat  
Steel, zinc plated  
Aluminum, black polyester powder coat with white silkscreen  
Unit Size:  
5.50 (W) x 1.75 (H) x 8.90 (D) inches (13.97 x 4.45 x 22.61 cm)  
Refer to Figure 2.  
Unit Weight  
MPS5DT:  
MPS524DT:  
MPS524DT/220:  
3 lb (1.36 kg)  
4 lb (1.80 kg)  
4 lb (1.80 kg)  
(Design and specifications are subject to change without notice.)  
Figure 2. Dimension Drawing  
Pelco Manual C545M-E (2/02)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGULATORY NOTICES  
This equipment has been tested and found to comply with the limits of a Class A digital de-  
vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable  
protection against harmful interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instruction manual, may cause harmful in-  
terference to radio communications. Operation of this equipment in a residential area is  
likely to cause harmful interference in which case the user will be required to correct the in-  
terference at his own expense.  
WARRANTY AND RETURN INFORMATION  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100  
or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide  
the following information:  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective  
in material or workmanship for a period of one year after the date of shipment.  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on Pelco manufactured cameras (CC3500/CC3600 and MC3500/  
MC3600 Series); two years on all other cameras.  
Three years on Genex® Series (multiplexers, server, and keyboard).  
Two years on cameras and all standard motorized or fixed focal length lenses.  
Two years on Legacy®, CamclosureCamera Systems, CM6700/CM6800/  
CM8500/CM9500/CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome  
products.  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written explana-  
tion with the product when returned.  
Two years on Spectra®, Esprit, and PS20 Scanners, including when used  
in continuous motion applications.  
Method of return shipment shall be the same or equal to the method by which  
the item was received by Pelco.  
Two years on WW5700 series window wiper (excluding wiper blades).  
Eighteen months on DX Series digital video recorders.  
One year (except video heads) on video cassette recorders (VCRs). Video  
heads will be covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous  
motion applications (that is, preset scan, tour and auto scan modes).  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call  
the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization num-  
ber (CA number if returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and  
refurbishing charge.  
Pelco will warrant all replacement parts and repairs for 90 days from the date of  
Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid  
to Pelco, Clovis, California. Repairs made necessary by reason of misuse,  
alteration, normal wear, or accident are not covered under this warranty.  
Goods returned for repair or credit should be clearly identified with the assigned  
CA or RA number and freight should be prepaid. Ship to the appropriate  
address below.  
Pelco assumes no risk and shall be subject to no liability for damages or loss  
resulting from the specific use or application made of the Products. Pelco’s  
liability for any claim, whether based on breach of contract, negligence, infringe-  
ment of any rights of any party or product liability, relating to the Products shall  
not exceed the price paid by the Dealer to Pelco for such Products. In no event  
will Pelco be liable for any special, incidental or consequential damages (includ-  
ing loss of use, loss of profit and claims of third parties) however caused, whether  
by the negligence of Pelco or otherwise.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:  
Intermediate Consignee  
American Overseas Air Freight  
320 Beach Road  
Burlingame, CA 94010  
USA  
Ultimate Consignee  
Pelco  
The above warranty provides the Dealer with specific legal rights. The Dealer  
may also have additional rights, which are subject to variation from state to state.  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
REVISION HISTORY  
Manual # Date  
Comments  
C545M  
C545M  
C545M  
C545M-C  
3/85  
1/90  
9/90  
10/94  
Original version.  
Rev. A. Revised to include MPS524DT/220.  
Rev. B. Revised page 2 and Figures 2 and 6.  
Rev. C. Revised to 2-Column Format. Incorporated new wiring diagrams (Figs. 5 and 6) and updated fuse values per  
ECO #94-482. Revised Figure 2 and cable assembly instructions in Section 4.1.  
Rev. D.Figures 5 and 6 revised to include new wire colors and new transformer, part #TRF22282.30.70F.  
Fuse value updated in Figure 6.  
C545M-D  
6/96  
3/97  
5/97  
Manual formatted to new style. Optional R300 Rack mount instructions removed. Figures 4 and 5 updated per ECO  
#97-125 (wiring colors and connections).  
C545M-E  
2/02  
Manual formatted to new style. New scanner models added. Figures 2-4 removed.  
® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco.  
™ Esprit and Camclosure are trademarks of Pelco.  
© Copyright 2002, Pelco  
All rights reserved.  
8
Pelco Manual C545M-E (2/02)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Digital Camera 12050 User Manual
Philips Cassette Player AQ5212 User Manual
Philips CRT Television TP2784C1 User Manual
Philips Headphones SBCHL145 User Manual
Philips MP3 Docking Station DCM105 User Manual
Pitney Bowes Postal Equipment G790 User Manual
Precor Exercise Bike EC860 User Manual
Professional Series Toaster PS77401 User Manual
Proson Home Theater System rv2600 dts User Manual
PYLE Audio Music Mixer PMX601 User Manual