EC 860
eddy current technology by Precor Incoporated
R
Owner’s Manual
Recumbent
ProfessionalCycle
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Before You Begin .......................................................... 4
1
2
4
Setting Up the EC860 Professional
Recumbent Cycle .......................................................... 5
Installation Requirements ............................................................
5
6
Using the EC860 Professional Recumbent Cycle ...... 8
3
Understanding the Electronic Console. .......................................
8
Adjusting the Seat ....................................................................... 11
Using Manual Mode (Workout Program 0) .................................. 12
Designing a Customized Course ................................................. 16
Getting the Most Out of Your Workout........................ 18
4
5
How Long Should I Exercise? ..................................................... 20
Maintaining the EC860 Professional
Recumbent Cycle.......................................................... 21
Cleaning the Cycle ...................................................................... 21
Getting Service ............................................................................ 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Congratulations on purchasing the most innovative recumbent cycle available,
the Precor EC860 Professional Recumbent Cycle. For the first time, an elec-
tronic cycle combines sophisticated electronics and high-tech styling with the
physiological benefits and comfort of recumbent styling.
1
The easy-to-use electronic console allows users to simply climb on and begin
cycling. The chosen course is displayed on the three-dimensional course
simulator along with the rider’s position on the course. Throughout the workout,
the electronics continually display statistics about distance travelled, pedal
RPM, time remaining in the program, and fitness score. With the electronic
pacer, users can easily maintain their intensity and judge their progress.
The EC860 Professional Recumbent Cycle is built to the exacting standards of
the health club environment, allowing it to withstand the rigors of daily club use.
To maximize the use of the EC860 Professional Recumbent Cycle, please
study this manual thoroughly.
About this Manual
Inside this manual, you will find instructions for installing and using the EC860
Professional Recumbent Cycle. You will also find an explanation of aerobic
conditioning and suggestions for developing an EC860 fitness program.
The manual uses the following conventions for identifying special information:
Note: Contains additional information that applies to the preceding text.
Important: Indicates information to which you should pay special attention.
CAUTION: Indicates steps or information necessary to prevent harm to
yourself or damage to the equipment.
page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the EC860 Professional
Recumbent Cycle
2
The EC860 Professional Recumbent Cycle comes fully assembled. You simply
need to follow the installation requirements listed in this section and place the
cycle in the appropriate location.
The cycle has a unique program that lets you determine which language and
measurement system appears on the electronic console display. You can
choose one of three languages: French, German, or English, and select either
U.S. Standard or Metric as the measurement system. The Club Setting Program
also enables you to limit workout time on the cycle so more people can use it.
Instructions on how to use the program are found in this section.
Installation Requirements
Follow the installation requirements below when installing the cycle. If you do not
install the cycle according to the following guidelines, you could void the Precor
warranty.
•
•
Set up the EC860 cycle on a solid, flat surface.
Use the appropriate voltage outlet and grounding as specified on the
cycle. The EC860 cycle is available in both 120-volt and 220-volt models.
Refer to the cycle’s identification label to determine the voltage and fre-
quency that your cycle needs.
CAUTION: Do not use a non-grounded outlet. Electrical damage might
occur if the EC860 cycle is connected to an improper power source.
page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Club Setting Program
The Club Setting Program lets you customize your cycle with the following
features:
•
Language—The words displayed on the electronic console can appear in
one of the three languages (French, German, or English). Typically, on the
cycle you buy, the language is preset to English.
•
Workout time—You can set a workout time limit between 2 and 60
minutes. For example, if a club owner sets the maximum workout time to
20 minutes, the cycle would allow users to specify a workout time from 2
to 20 minutes. Users could not specify a workout time longer than 20
minutes. When you buy the cycle, it is set to the maximum workout time of
60 minutes.
•
Measurement system—You can choose between U.S. Standard or
Metric. Typically, the cycle you buy is set to U.S. Standard.
To access the Club Setting program, you need to press a specific combination
of keys on the electronic console. This design helps secure the cycle from
unauthorized access and changes.
To use the Club Setting program, take the following steps:
1. Make sure that the cycle is located in an appropriate place and plugged in.
2. If the cycle is turned OFF, turn it ON using the ON/OFF power switch. This
switch is located on the front of the cycle, near the power cord.
3. To display the initial start-up prompt, press the ON key.
Note: If the cycle is already ON and EC860 is scrolling across the bottom
of the display. You can press any key and the initial start-up prompt,
“Choose Workout Program” will appear.
4. When the start-up prompt “Choose Workout Program” appears, access
the Club Settings program by simultaneously pressing and holding the ON
and
keys for a minimum of 5 seconds.
5. Release both keys when the Club Settings screen appears on the console
as shown in Diagram 1.
page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagram 1
Club Settings
screen
6. At the “Enter Language Selection” prompt, specify the language you want
by using the
and
keys. Press ENTER/RESET when the desired
language is displayed.
7. At the “Enter Club Time Limit” prompt, specify the maximum workout time
by using the
and
keys. Use the
key to raise the time displayed;
Use the
key to lower the time displayed.
The cycle provides a maximum workout time of 60 minutes. You can
change the settings and limit workout sessions to any one of the following:
2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28, 30, 40, 50, or 60 minutes.
When the desired time limit appears, press the ENTER/RESET key.
8. At the “Enter Machine Units” prompt, use the keys to select
the measurement system, either U.S. Standard or Metric, then press
ENTER/RESET.
The “Choose Workout Program” prompt appears and the cycle is ready
for use.
page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the EC860 Professional
Recumbent Cycle
3
The EC860 Professional Recumbent Cycle is designed so users can work out
without instruction or training. The directions on the console and the prompts on
the screen will guide a user through the entire workout session. Before the
cycle is used, however, we recommend familiarizing yourself with it so it will be
used safely and effectively. This section covers the following information:
•
•
•
•
•
•
an overview of the features provided on the electronic console
information about adjusting seat height
instructions for turning the cycle on and off
an explanation about using the cycle in manual mode (workout program 0)
instructions for exercising on the cycle
instructions for designing a customized exercise program (two custom
courses can be designed—workout programs 8 and 9)
Understanding the Electronic Console
Once the EC860 cycle is set up, it is ready to use. There are no complex
instructions to follow or mandatory programming steps required to operate the
cycle. Simply select one of the 10 workout programs, then specify how hard and
how long you want to work. As you exercise, the electronic console provides
motivation and presents constant feedback about your progress.
A screen-saver feature causes the console displays to disappear 2 minutes
after a workout program ends. If you stop exercising and take more than a 2
minute break, your workout session ends and the screen-saver feature pro-
duces blank window displays. While the left and right window displays remain
blank, “EC860 Press any button to begin exercise” appears and scrolls
across the bottom window display.
Diagram 2 illustrates the EC860 electronic console. Its keys and displays are
explained on the following pages.
page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagram 2
EC860
Electronic
console display
Keypad
The electronic console keypad has four keys:
ON: When starting a workout, press the ON key and the initial start-up prompt,
“Choose Workout Program” appears on the display.
and
keys: Use the arrow keys to move through the selections that
appear on the console’s display.
ENTER/RESET: Press this key to choose the displayed value or selection. After
you press ENTER/RESET, the electronics will remember what you specified
and continue to the next function or prompt.
If you are using a specific program during a workout and want it to end, press
ENTER/RESET. Your Performance Summary appears. To cancel the program
and return to the initial start-up prompt, press ENTER/RESET again. The start-
up prompt, “Choose Workout Program” appears on the display. You can then
begin another exercise program or end your workout.
Left Display
Window
The left display on the electronic console provides information about your
workout session:
Program: Indicates the workout program selected for an exercise session. You
can choose between 0 and 9 by using the arrow keys.
Level: Shows the selected effort level, from 1 to 9. The higher the number you
select, the more resistance you receive. You can change the effort level any-
time during a workout by using the arrow keys to increase or decrease the
resistance.
page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pedal RPM: Shows pedal speed in revolutions per minute (RPM). Use this
display to determine exercise intensity (how hard you are working out) at any
given moment.
Fitness Score: Shows a fitness score from 1 to 100 percent. The fitness score
is associated with the pacer and helps you determine whether or not you are
using the correct exercise level. To maintain a 100% fitness score you must
finish the program at the same time as the pacer. You will exceed 100% if you
finish ahead of the pacer and be below 100% if you finish behind the pacer.
If you can easily maintain a 100 percent fitness score, you might want to
choose a more challenging workout next time. However, if you have difficulty
maintaining a high enough score, you might want to choose a lower exercise
level.
Watts: Indicates the amount of energy currently being expended.
Calories per Hour: Indicates the number of calories burned per hour. Use this
display, along with Calories Used and Pedal RPM, to determine exercise
intensity (how hard you are working out) at any given moment.
Calories Used: Provides the number of calories burned in the workout. The
cycle determines calories based on a 160 pound rider so if your weight is
different, you should use the displayed information only as a reference.
Distance: Shows how far you have travelled, in either miles or kilometers. Use
this information to measure total work accomplished during a workout.
Time: Lists the amount of time remaining on the course you are using. Use this
display to pace yourself during a workout.
Goal Setting: Indicates the anticipated targets the user will achieve at the
selected program or effort level. The goals you set are affected by the speed,
workload, and time of your workout session. When you enter a time after the
“Enter Workout Time” prompt, the display “Your Goals Are” appears in the left
window display and provides the basis for your workout and performance
summary.
Right Display
Window
The right display window on the electronic console prompts you to enter specific
information, graphically displays a pacer, and provides information about
incline:
Pace Tempo: Provides a tempo for you to follow. The pacer provides motiva-
tion and helps you maintain exercise intensity. During a workout, if you change
the effort level, the pace tempo changes to reflect the new level.
While you workout, the console displays a roadway with two triangles, one on
each side of the centerline. The shaded triangle on the left side is the pacer; the
triangle on the right side represents you.
If your speed remains even with the pacer, the triangles remain the same size.
If you are behind the pacer, the pacer appears to move ahead and become
smaller in size. When your speed is greater than the pacer’s, the triangle that
page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
represents you appears to move ahead and become smaller in size.
Hill Profile: Appears in the upper right-hand corner of the screen. It provides a
graphic representation of the current grade of incline in the course. Below this
window, you will see a number that represents the relative effort level of that
part of the course. A “1” represents the easiest and a “9” represents the most
difficult level.
Performance Summary: Appears at the end of your workout and indicates
whether or not you met the goals you set for the total calories burned, distance
covered, and time elapsed. The workout statistics appear as a percent of your
goals. Review your workout statistics to determine how well you did.
Bottom Display
Window
Program Profile: The course profile that appears in the bottom window display
corresponds to the program you selected. As you proceed through your work-
out, the left portion of the profile becomes shaded indicating the course seg-
ments you have already completed.
Adjusting the Seat
Before starting a workout, you should position the seat properly to avoid strain
on your knees. Take the following steps to adjust the seat.
1. To check for proper seat position, sit on the seat of the cycle with both feet
in the pedals (make sure that the balls of your feet are centered on the
pads). The knee of the extended leg should be slightly bent, 10 to 15
Photo 1
Proper leg position
A 10 to 15
degree bend
degrees (see Photo 1).
2. If you need to adjust the seat, dismount and with your left hand grab the
assist handle (molded into the frame). With your right hand, press the seat
page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
adjustment pin down. Slide the seat post forward or backward into the
desired position.
3. Release the seat adjustment pin.
CAUTION: Make sure that the seat is securely in place before using
the cycle for a workout.
4. Before sitting on the cycle, make sure that the adjustment pin is properly
seated in the appropriate hole.
5. Sit on the cycle’s seat again and, if necessary, follow steps 2 through 4 to
readjust the seat’s position.
Turning the Cycle ON and OFF
Use the ON//OFF power switch to turn the cycle ON and OFF. This switch is
located on the front of the cycle, near the power cord. It takes about 45 seconds
for the electronic console displays to appear after the cycle has been turned ON
and you have pressed the ON key.
Use the ON/OFF power switch to turn OFF the cycle when it is not being used
for any length of time. For example, have the cycle turned OFF during non-
business hours.
Using Manual Mode (Workout Program 0)
In addition to choosing a preprogrammed or custom course, you can choose
manual mode. Manual mode is the same as the workout program “0,” which lets
you control your effort level while the program is in progress.
After you select program “0,” the program’s course profile appears in the bottom
window display and shows a flat, constant course. The Hill Profile appears in
the upper right corner of the right window display and indicates an incline level
of 5. Use the arrow keys to change your effort and incline levels; as you change
the levels, the segments in the profiles also change.
•
•
A low level profile represents the least amount of effort required and the
lowest number of calories burned.
A high level profile represents the highest amount of effort required and the
greatest number of calories burned.
As you proceed through your workout, the left portion of the course profile
becomes shaded indicating the course segments you have already completed.
page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercising on the EC860 Cycle
This section explains how to exercise on the cycle. The EC860 comes with
seven preprogrammed courses. These courses differ in the “terrain” you cover.
Each course includes warm-up and cool-down intervals appropriate to the total
course length.
All seven preprogrammed courses can be performed at any of the nine effort
levels. To select the effort level appropriate for your level of fitness, start with
level 1 (beginner exercise). If you receive a score of 100 percent, continue to
the next highest level. Each time you receive a 100 percent score, you should
advance to the next effort level for a more challenging workout.
Note: The fitness score is associated with the pacer and helps you determine
whether or not you are using the correct exercise level. To maintain a 100%
fitness score you must finish the program at the same time as the pacer. You
will exceed 100% if you finish ahead of the pacer and be below 100% if you
finish behind the pacer.
In addition to the preprogrammed courses, you can choose a custom course
that you or the club owner has designed. Two custom courses can be created
(for instructions, see Designing a Customized Course later in this section). You
can also select manual mode (program 0) which lets you control your effort
level while the program is in progress.
Once you have answered the start-up prompts and started exercising in a
workout program, you can exit the program by pressing ENTER/RESET.
Pressing this key cancels the program. The cycle displays your Performance
Summary, then the initial start-up prompt.
CAUTION: Before beginning any fitness program, you should have a
complete physical examination by your physician.
To exercise on the cycle, take the following steps:
1. Check to see that the cycle is turned ON. If it is turned OFF, turn it ON
using the ON/OFF power switch. This switch is located on the front of the
cycle, near the power cord.
2. Sit on the cycle. Make sure that your weight is balanced and your feet are
positioned securely, with the balls of your feet centered on the pads. You
might need to adjust the seat and handlebars to comfortable positions.
(Refer to Adjusting the Seat and Adjusting the Handlebars for instructions.)
3. Press the ON key. The initial start-up prompt, “Choose Workout Program”
appears.
Note: If the cycle is already ON and EC860 is scrolling across the bottom of
the display. You can press any key and the initial start-up prompt, “Choose
Workout Program” will appear.
page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Once the “Choose Workout Program” prompt appears, select a program
using the arrow keys.
Select from the seven preprogrammed courses, two custom courses, or
manual mode (program 0). To help you select from the preprogrammed
courses, Diagram 3 illustrates the course profiles.
Note: You might want to remember the program number. By specifying the
same number again you can repeat the workout.
Diagram 3
Profiles of the
preprogrammed courses
1
3
5
7
2
4
6
8
User Program 1; can be customized
9
0
Manual Mode; can be changed
User Program 2; can be customized
page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When the desired workout program number is displayed, press ENTER/
RESET.
6. If the “Choose Effort Level” prompt appears, specify the effort level or
resistance you prefer by pressing the arrow keys. This prompt will not
appear if you chose program 0 in Step 4.
Nine different effort levels are available:
1
2
3
4
5
Beginner exercise
Beginner weight loss
Weight loss
Light exercise
Moderate exercise
6
7
8
9
Heavy exercise
Light competition
Moderate competition
Heavy competition
Note: To repeat these exact workout again, you need to specify the same
effort level number in addition to the program number.
7. Once the desired effort level number appears, press ENTER/RESET. The
“Enter Workout Time” prompt appears.
8. Use the arrow keys to specify how long you want to work out. The displays
in the left window (Calories Used, Distance, and Time) change as you scroll
through the units of time. When the desired amount of time is displayed,
press ENTER/RESET.
The Club Settings program lets club owners limit the length of time allowed
for a workout. When specifying a workout time, you can choose any time up
to, but not longer than, this limit. For example, if the time limit is set at 30
minutes, you can set a workout time from 2 minutes to a maximum of 30
minutes.
After you enter a workout time, the Goal Setting display “Your Goals Are”
appears in the left window showing the target amounts you can achieve
with the workout selected.
9. To start your workout, begin pedaling.
During a workout, you can change your effort level using the arrow keys.
Doing this affects how hard you work, but does not change the profile of the
course unless you are using Manual mode (program 0).
10. Continue your workout until the program ends. Maintain your exercise
intensity by pedaling with the pacer.
Note: We do not recommend exercising faster than the pacer since it is
provided to help you work out. If you want a more difficult exercise session,
select a different program or a higher effort level.
11. When the selected exercise program ends, review your performance
summary.
We recommend that you keep track of your workouts by writing them down.
This way you can monitor your progress toward your fitness goals and also use
the information as a reference in planning interesting and challenging workouts
in the future.
page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Designing a Customized Course
The EC860 Professional Recumbent Cycle lets you design two custom courses:
program “8” and program “9.” To access these courses, you need to press a
specific combination of keys on the electronic console. This design helps
secure the cycle from unauthorized access and changes.
To design a custom course, take the following steps:
1. Check that the cycle is turned ON. If it is turned OFF, turn it ON using the
ON/OFF power switch. This switch is located on the front of the cycle, near
the power cord.
2. Press the ON key. The initial start-up prompt, “Choose Workout Program”
appears.
Note: If the cycle is already ON and EC860 is scrolling across the bottom of
the display. You can start pedaling, press the
and
keys, or press
ENTER/RESET and the initial start-up prompt, “Choose Workout Pro-
gram” will appear.
3. Access the User Programming screen by simultaneously pressing and
holding ON and
for a minimum of 5 seconds.
4. Release both keys when you see the User Programming screen. In the
upper left-hand window, “User Program 1” will be highlighted as shown in
Diagram 4.
Note: User Program 1 represents program 8 and User Program 2 repre-
sents program 9.
Diagram 4
User Programming screen
page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Make sure that the program name you want to modify is shown in the left
window display. To select the other program, press the key.
Note: If you accidentally press the
continue to press the key and cycle through all 24 segments in the
course profile until the highlight returns to the program name.
key when selecting a program name,
6. Press the
key to move the cursor to the course profile window.
7. Begin modifying the profile as desired. The highlighted segment of the
profile indicates your position. Any changes that you make occur only in the
highlighted segment of the profile.
•
Press the
area. Repeatedly pressing the
allowed. For example, when the maximum height is displayed, another
push of the key returns the profile to the lowest height.
key to change the height of the profile in the highlighted
key cycles through all the heights
Keep in mind as you specify heights that 1 represents the lowest
resistance and 9 represents the greatest resistance. To help you, the
window in the upper right-hand window shows the incline of the current
selection.
•
Press the
key to move to the next segment of the profile. Each
profile consists of 24 segments.
Once you reach the 24th segment, the cursor moves from profile view to
program name, and the program name is highlighted.
8. If desired, modify the other program by returning to Step 5.
9. When you are finished, press ENTER/RESET to save your changes.
The initial start-up prompt, “Choose Workout Program,” appears and the
cycle is ready to use.
page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting the Most Out of Your Workout
4
A workout on the EC860 Professional Recumbent Cycle provides excellent and
efficient cardiovascular conditioning, while strengthening and toning all the
major muscle groups in the lower body. Darkened areas in Diagram 5 indicate
the muscles worked.
To get the most out of each workout, a general understanding of the principles
behind aerobic training is invaluable. The best source of information is your
specialty fitness dealer. In addition to providing information on which exercise
equipment is best for your individual needs, your fitness dealer can provide
advise on training, technique, and exercise physiology. Your dealer can also
recommend good books on these subjects.
To help you get started in planning and carrying out your fitness program, this
section provides some basic information on aerobic exercise—such as how
hard you should workout, how long each session should be, and how often you
need to exercise to benefit from a regular program.
Diagram 5
Muscles exercised
during an EC850
workout
1
3
1
2
6
2
5
8
1. Trapezius
2. Deltoid
3. Pectorals
4. Rhomboids
5. Triceps
6. Biceps
7. Latissimus Dorsi
8. Forearm Flexors/
Extensors
4
9
7
8
10
12
11
13
9. Abdominals
10. Erector Spinae
11. Gluteals
14
12. Hip Flexors
13. Quadriceps
14. Hamstrings
15. Gastrocnemius/
Soleus
15
16
16
16. Peroneus Longus/
Brevis
page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
How Hard Should I Exercise?
Studies show that to achieve the benefits of aerobic exercise, it is necessary to
work out hard enough to raise your heart rate to a certain minimum level, called
the “training zone.” Your training zone depends on your age and level of fitness.
Refer to Diagram 6 to determine your training zone. Keep in mind that this zone
is an approximation, to be used as a guideline—individual heart rates vary
according to several physiological factors. To determine your training zone, or
target heart rate, find your age and fitness level on the diagram, and then find
the line where they intersect. For example, if you are 35 years old, your training
heart rate at the intermediate fitness level is 157 beats per minute. Remember
this number—this is the pulse rate you should try to maintain as you work out.
To determine your heart rate, take your pulse at a place that you can reach
easily and comfortably while you exercise. Typical places for measuring heart
rate are directly over the heart on the left side of the chest, on either side of the
neck, over the temple, or on the thumb side of either wrist. Wherever you
measure your pulse, make sure that you use your index and middle fingers—
not your thumb. Your thumb has a strong pulse which can affect your heart rate
reading.
Diagram 6
Training zones
200
200
195
100%
190
190
180
170
160
150
140
130
120
110
100
Maximum Attainable Heart Rate
185
180
175
180
Advanced
175
166
90%
171
162
Maximum Attainable Heart Rate
170
Intermed1i7a0te
166
85%
165
162
160
157
157
Maximum Attainable Heart Rate
155
153
153
150
148
149
145
144
145
140
Beginner
139
132
140
Maximum Attainable Heart Rate
130
70%
136
117
135
128
136
133
114
131
123
126
123
120
119
60%
111
Maximum Attainable Heart Rate
115
112
96
108
93
108
105
105
90
102
102
87
99
90
80
20 25 30 35 40 45 50 55 60 65 70 75
YOUR AGE
Once you locate your pulse, look at a clock with a second hand, and count the
beats for six seconds. Multiply that number by 10 to determine the total number
of beats per minute. For example, if you count 14 beats over six seconds, the
total number of beats per minute is 140. Compare the total number of beats with
your training zone as identified in Diagram 6. If necessary, increase or decrease
your activity to bring your heart rate into your training zone. You can regulate
how hard you (and your heart) work by choosing different effort levels. Remem-
ber—your heart rate is the definitive measure of how hard you are working.
page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Regardless of your fitness level, avoid doing too much too soon. Selecting too
hard a course or too high an effort level are common errors. Give yourself time
to become familiar with your cycle and to improve your fitness level. Then you
can gradually increase the effort level or course difficulty to make your workouts
more challenging.
How Long Should I Exercise?
The length of each exercise session depends on your fitness level. Exercise
physiologists have determined that, to attain cardiovascular benefits from
exercise, you should maintain your heart rate in its training zone for at least 15
minutes. This is in addition to your warm-up time, and does not include cool
down. You should always allow several minutes to bring your heart rate into
your training zone, by starting out slowly and gradually increasing work level.
Similarly, use several minutes of light exercise after the workout to bring your
heart rate down to near resting level.
The higher your fitness level, the longer you should maintain your heart rate in
the training zone (between 20 and 30 minutes). Beginners should always start
slowly, and gradually increase their sessions to 20 minutes or more.
How Often Should I Exercise?
Research indicates that aerobic sessions of 20 minutes or more should be done
at least three to five times a week to obtain significant cardiovascular benefits.
Most experts agree that sensible eating habits and regular aerobic exercise are
the keys to weight control and fitness. A recent study, which tracked several
subjects over a period of years, conclusively showed that exercise, not dieting,
is the key factor to long-term weight loss.
page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the EC860 Professional
Recumbent Cycle
5
Because of its advanced design, the EC860 cycle requires little maintenance
beyond periodic cleaning, which is explained in this section. Keep in mind that,
as owner of this machine, you are solely responsible for its maintenance.
If you encounter problems with the cycle, follow the instructions in Using the
Diagnostic Program. This program performs some basic diagnostic routines that
can help you troubleshoot problems.
CAUTION: Unplug the cycle from the power outlet before performing any
maintenance tasks, such as cleaning.
Cleaning the Cycle
Clean the cabinet using normal over-the-counter products made for cleaning
plastic and rubber. Do not use these products on the electronic console since
they will scratch its surface.
Clean the surface of electronic console with a damp sponge or soft cloth. You
can use mild soap and warm water (not hot) or a general household cleaner to
clean the console. Dry the surface thoroughly with a clean towel.
Important: Do not pour liquids on the electronic console and take special care
when cleaning the electronic console display to avoid scratching its surface.
Using the Diagnostic Program
The EC860 cycle provides a Diagnostic program to help you troubleshoot most
problems that might arise. When you first access this program, it automatically
tests the operation of the main computer functions. If these functions pass, you
can test the operation of the keys and the speed sensor, Hall 1. If any test fails,
the EC860 cycle must be serviced. See Getting Service for details.
Note: The speed sensor, Hall 2, is not used on the EC860 cycle.
Accessing the Diagnostic program requires pressing a specific combination of
keys on the electronic console. This design helps secure the cycle from unau-
thorized access and changes.
To access the Diagnostic program, take the following steps:
1. If the cycle is turned off, turn it ON using the ON/OFF power switch.
page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the ON key. The initial start-up prompt, “Choose Workout Program”
appears. (The display may take a minute to appear.)
Note: If the cycle is already ON and EC860 is scrolling across the bottom of
the display. You can press any key and the initial start-up prompt will
appear.
3. When the “Choose Workout Program” prompt appears, access the
Diagnostic program by simultaneously holding down the ON and ENTER/
RESET keys for a minimum of 5 seconds.
4. Release the keys when you see the Diagnostic screen as shown in
Diagram 7.
Diagram 7
Diagnostic screen
5. Watch the screen as the Diagnostic program automatically executes six
tests. These tests check the operating condition of several of the main
computer functions. All six of these tests must succeed before the displays
in the right and bottom windows appear.
VID (Video)
VRAM (Video RAM)
RAM (System RAM)
ROM1
ROM2
NVRAM (Non-volatile RAM)
6. Using the Diagnostic screen, test the keypad operation by pressing each
key and watching the right window display.
The display has a graphic representation of the four keys. When you press
a key and it is operating correctly, the corresponding box will highlight. The
electronic console overlay might be defective, if the box does not highlight
when a key is pressed, or if the box remains highlighted after the key is
released.
page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Test the Hall 1 speed sensor by SLOWLY moving the pedals. Continue
pedaling for about 1 minute. The asterisk to the right of “Hall 1” will blink on
and off if the sensor is working correctly. If the asterisk stays solid, the cycle
needs servicing. Please note that only Hall 1 is used; ignore Hall 2.
8. To exit the Diagnostic program, either use the power switch to turn the
cycle OFF then ON, or press ENTER/RESET three times. In either case,
the initial start-up prompt, “Choose Workout Program,” appears.
Getting Service
Do not attempt to service an EC860 cycle yourself except for the maintenance
and diagnostic tasks described in this manual. The EC860 cycle does not
contain any user-serviceable parts.
To contact a Precor Commercial Products Customer Service Representative,
call 1-800-347-4404.
page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Specifications
Chassis
Welded steel uni-frame construction
Readouts
Multi-functional motivational digital display:
•
•
•
•
•
•
•
•
•
•
Program and level selection
Pedal RPM
Fitness score
Watts (resistance level)
Calories/hour
Calories used
Distance
Time (in minutes)
Hill profile
Motivational pacer
Display Panel Programming Modes
•
•
•
•
•
Seven computer-stored aerobic programs
Two open channels to design personal programs
Manual program
Race/cruise interval training program (9 gradually-progressing levels)
Standard program features 2-60 minutes in user-selectable and self-
programming modes
•
•
Automatically determines user’s time, calories, and distance goals
Provides periodic feedback to goals completed during workout
Specifications
Seat adjustment length:
Length:
12 1/2 inches
50 inches
Width:
24 inches
Weight:
135 pounds
Power requirements:
Shipping weight:
110/220VAC, 60/50 Hz
145 pounds
page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Precor Incorporated
20001 North Creek Parkway
P.O. Box 3004
Precor is a registered trademark of Precor Incorporated.
© 1991 Precor Incorporated
Specifications subject to change without notice.
1-800-4-PRECOR
P/N 33274-102
7/92
Bothell, WA USA 98041-3004
Download from Www.Somanuals.com. All Manuals Search And Download.
|