Pelco DVR C1669M 4 05 User Manual

DX8000 Series  
Upgrade and Recovery  
Instructions  
C1669M (4/05)  
Digital Video Recorder  
DX8000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX8000 Settings Export/Import Procedure  
This section describes how to upgrade the DX8000 Series DVR software from Version 1.0.00.1088 to Version 1.1.00.1121.  
The DX8000 Settings export/import procedure describes how to do the following:  
Export your current DX8000 configuration settings  
Use the DX8000 Recovery CD to upgrade from Version 1.0.00.1088 to Version 1.1.00.1121  
Import your current DX8000 configuration settings and configure the new version of DX8000 software  
This procedure ensures that you will have a smooth transition to the next version of DX8000 software.  
There are two phases to perform the DX8000 settings export/import procedure: export and import. The steps to perform the export and import  
phases are summarized as follows:  
Export settings phase:  
Step 1: Recording DX8000 Network Settings  
Step 2: Exporting DVR Settings  
Step 3: Recording IP Security Settings  
Step 4: Running the DX8000 Recovery Procedure  
Import settings phase:  
Step 5: Entering Networking Settings  
Step 6: Importing the DX8000 DVR Settings  
Step 7: Configuring IP Security Settings  
EXPORT PHASE  
Step 1: Recording DX8000 Network Settings  
To document the DX8000 network settings:  
1. Click the Setup icon.  
2. Click the Network icon.  
3. Do the following:  
a. Record the DX8000 IP address: ___________________________.  
b. Record the subnet mask: ________________________________.  
c. Record the default gateway address: ________________________.  
d. Indicate if Obtain an IP Address Automatically is: Checked_____ Unchecked_____.  
C1669M (4/05)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2: Exporting DVR Settings  
To export the DX8000 DVR settings:  
1. Insert a USB key into one of the DX8000 USB ports on the front panel.  
2. Click Edit > Export Setup.  
3. Double-click the drive assigned to your USB key.  
4. Type a name for your backup file in the File name text box, and then click Save. The DX8000 exports the settings to the USB key.  
5. Do the following:  
a. Click File > Exit. The Shut down dialog box opens.  
b. Select Exit to Windows Mode from the drop-down menu. The Log On to Windows dialog box opens.  
c. (Optional) Enter the Windows password (not required for V1.0).  
d. Click OK. The system logs you into the Windows operating system.  
6. When the DX8000 is in the Windows environment, do the following:  
a. To stop the USB device, on the Windows taskbar, left-click the Unplug or Eject Hardware icon. The Stop USB Mass Storage Device  
message dialog appears next to the icon.  
b. Click Stop USB Mass Storage Device. The Safe to Remove Hardware dialog box opens.  
c. Click OK.  
d. Unplug the USB key.  
Step 3: Recording IP Security Settings  
This procedure describes how to record the DX8000 IP security settings.  
NOTE: Remain in the Windows environment to perform the following procedure.  
To record the DX8000 IP security settings:  
1. Click the Start button.  
2. Click Programs > Manage IPSec Policy.  
3. Record the status of Enable IP Security Policy.  
Enable IP Security Policy: Checked_____ Unchecked_____  
4. Click cancel to exit.  
Step 4: Running the DX8000 Recovery Procedure  
IMPORTANT:  
You must complete steps 1, 2, and 3 before running the recovery procedure.  
Please complete the DX8000 Recovery Procedure on page 6 before performing the Import Phase.  
IMPORT PHASE  
This section describes how to import the network settings that you previously backed up and is organized as follows:  
Step 5: Entering Networking Settings  
Step 6: Importing the DX8000 DVR Settings  
Step 7: Configuring IP Security Settings  
4
C1669M (4/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5: Entering Networking Settings  
This section describes how to enter the DX8000 network settings.  
NOTE: If Obtain an IP Address Automatically was previously checked, skip this section.  
To enter the DX8000 network settings:  
1. From the DX8000 toolbar, click Setup icon.  
2. In the Setup dialog, click Network.  
3. Deselect Obtain an IP Address Automatically.  
4. Type the IP address, subnet mask, and default gateway address that you previously recorded.  
Step 6: Importing the DX8000 DVR Settings  
To import the DX8000 DVR settings:  
1. Insert USB Key into the front of the unit.  
2. Click Edit > Import Setup.  
3. Double-click the last drive on the list; this is your USB Key.  
4. Locate the backup file you previously created, and then click Open.  
5. Your previously backed up settings will now import themselves into your new installation.  
Step 7: Configuring IP Security Settings  
NOTE: If Enable IP Security Policy was previously checked, skip this section.  
To configure the IP security settings:  
1. Do the following:  
a. Click File > Exit. The Shut down dialog box opens.  
b. Select Exit to Windows Mode from the drop-down menu. The Log On to Windows dialog box opens.  
c. Enter the Windows user name. (The default user name is DX8000ADM.)  
d. Enter the Windows password. (The default password is dx8000.)  
e. Click OK. The system logs you into the Windows operating system.  
2. Once the DX8000 is exited to the Windows environment, do the following:  
a. Click Start on the Windows taskbar.  
b. Click Programs > Manage IPSec Policy. The DX8000 IPSec Policy dialog box opens.  
c. Click the Enable IP Security check box (if it is checked) to deselect it.  
d. Click OK.  
3. Do the following:  
a. Click Start.  
b. Click Shut Down. The Shut Down Windows dialog box opens.  
c. Select Restart from the drop-down menu.  
d. Click OK. The DX8000 restarts.  
C1669M (4/05)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DX8000 Recovery Procedure  
The DX8000 recovery procedure describes how to recover your DX8000 software using the DX8000 Recovery CD that is provided with the  
DX8000.  
To recover DX8000 software using the DX8000 Recovery CD:  
1. Insert the DX8000 Recovery CD into the CD-ROM drive.  
2. Do the following:  
a. Restart the DX8000.  
b. Enter the BIOS by pressing Delete at the point the DX8000 is running its POST.  
c. In the BIOS setup, go to the boot menu and highlight ATAPI CD-ROM.  
d. Press + until ATAPI CD-ROM is #1 at the top of the list.  
e. Press F10 and select Yes to save your changes and exit. The DX8000 will restart and prompt you by displaying “Press any key to boot  
from CD.”  
NOTE: This prompt is only displayed for a few of seconds and if missed the unit will not boot from the DX8000 Recovery CD.  
f.  
Press the Space bar. The Warning screen is displayed.  
g. Type Yes in the text box to agree to the recovery procedure, and then click Proceed.  
h. Click Exit after the clone process is completed to restart the DX8000. The DX8000 restarts.  
3. Do the following:  
a. Enter the BIOS by pressing Delete at the point the DX8000 is running its POST.  
b. In BIOS setup, go to the boot menu and highlight IDE Hard Drive.  
c. Press + until IDE Hard Drive is #1 at the top of the list.  
4. Eject the DX8000 Recovery CD.  
5. Press F10 and select Yes to save changes and exit. The DX8000 will restart and boot up into the Windows 2000 Setup mode.  
6. Do the following:  
a. Select “I accept agreement,” and then click Next.  
b. Click Next again when it asks for regional settings.  
c. Enter the Windows 2000 product key, and then click Next.  
d. Enter the DX8000 name and leave Administrator password unchanged.  
e. Click Next. The DX8000 will reboot and prompt you to initialize the hard disks for use with the DX8000 database.  
f.  
Click “+” next to the PDB Group ID box to expand the tree.  
If updating an existing system and you want to save previously recorded video, select Recovery on the PDB Group ID box. In this  
case, all of the boxes should turn yellow and the individual drives should have Used selected. This step will save your  
recorded video.  
If installing this system for the first time, on each of the individual disk drives in the tree, make sure that Allocation is selected.  
This step will erase all data on all of the drives.  
Click Begin Allocation to start the database initialization. The DX8000 will take about 5 to 10 minutes to initialize the database and begin  
operation.  
6
C1669M (4/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REVISION HISTORY  
Manual #  
Date  
Comments  
C1669M  
4/05  
Original version.  
Pelco and the Pelco logo are registered trademarks of Pelco.  
© Copyright 2005, Pelco. All rights reserved.  
C1669M (4/05)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
¨
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East  
|
|
|
|
|
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Video Game Keyboard KBD5000 User Manual
Philips Headphones SBC HC630 User Manual
Philips Headphones SHM2000 00 User Manual
Philips MP3 Player AJ 210 User Manual
Philips Tablet PI3900 User Manual
Philips TV Receiver SBCVL1205 19 User Manual
Philips Work Light PL L User Manual
Pioneer GPS Receiver AVIC Z3 User Manual
Poulan Lawn Mower 187007 User Manual
Pride Mobility Mobility Aid Outlander User Manual