Pelco Computer Monitor PMC14H User Manual

I N S T A L L A T I O N / O P E R A T I O N  
PMC14H and PMC14H-GY  
14-Inch Color Monitor  
®
C2906M (7/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
The PMC14H is a high-resolution color monitor that can be used in desktop applications or rack mounted using the optional  
RMA14F rack mount kit. The monitor supports NTSC and PAL video, as well as 120 VAC and 230 VAC input power. An  
automatic switching system makes all the necessary changes for adapting to the required formats. Manual selection is not  
required. A separate power cord is supplied for each voltage input.  
The back panel of the PMC14H has two BNC video inputs with looping outputs, one S-Video input, and multiple audio inputs  
and outputs. All image adjustment controls are conveniently located on the front panel of the monitor.  
C2906M (7/03)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Table A. Video Coaxial Cable Requirements  
1. Make all equipment connections as required for your  
installation. Refer to Figures 1 through 3 for samples of  
installation methods.  
Cable Type*  
RG59/U  
Maximum Distance  
750 ft (229 m)  
Refer to Table A for coaxial cable requirements.  
RG6/U  
1,000 ft (305 m)  
1,500 ft (457 m)  
2. Plug power cord into the AC INLET connection on the  
rear panel of the monitor. Plug the other end into a  
power receptacle.  
RG11/U  
*Minimum cable requirements:  
75 ohms impedance  
All-copper center conductor  
All-copper braided shield with 95% braid coverage  
CAMERA  
VIDEO  
AUDIO  
V1  
V2  
V1  
V2 S-VIDEO  
IN  
IN  
CAMERA  
OUT  
OUT  
S-VIDEO  
VCR  
VCR  
Figure 1. Looping Operation – One Monitor with External Video Equipment  
4
C2906M (7/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO  
AUDIO  
V2 S-VIDEO  
V1  
V2  
V1  
IN  
IN  
OUT  
CAMERA  
OUT  
S-VIDEO  
S-VHS OUT  
AUDIO OUT  
VCR  
Figure 2. S-VHS Video Input Connections  
Note: The S-Video connector is an input connector; there is no loop-through capability using S-Video.  
VIDEO  
AUDIO  
V2 S-VIDEO  
V1  
V1  
V1  
V2  
V2  
V2  
V1  
V1  
V1  
IN  
IN  
CAMERA  
OUT  
OUT  
S-VIDEO  
S-VIDEO  
S-VIDEO  
VIDEO  
AUDIO  
V2 S-VIDEO  
IN  
IN  
OUT  
OUT  
VIDEO  
AUDIO  
V2 S-VIDEO  
IN  
IN  
OUT  
OUT  
VCR  
Figure 3. Looping Operation – Maximum of Three Monitors with External Video Equipment  
C2906M (7/03)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
1. Press the POWER button to turn the monitor on. The LED above the power button will illuminate when the monitor is on.  
2. Select the camera by pressing the V1, V2, or S-VIDEO button (refer to Figure 4).  
3. If required adjust the picture using the control knobs on the front panel. Refer to Figure 4 for front panel controls.  
FRONT PANEL ADJUSTMENTS  
TINT  
Color phase adjustment. Turn clockwise to increase the greenish tones in the picture. Turn counterclockwise  
to increase the reddish tones in the picture.  
COLOR Color saturation level. Turn the control knob clockwise to increase the saturation level and counterclockwise  
to decrease the saturation level.  
CONT  
Contrast adjustment. Proper adjustment will allow maximum gradations between the darkest and lightest  
picture contrast. Turn the control clockwise to increase picture contrast and counterclockwise to decrease  
contrast.  
BRIGHT Brightness display adjustment. Turn the control clockwise to increase brightness and counterclockwise to  
decrease brightness.  
SHARP Sharpness adjustment. Adjust control knob to obtain the clearest picture.  
VOLUME Audio adjustment. Turn the control clockwise to increase volume and counterclockwise to decrease volume.  
PMC14H  
V1  
V2 S-VIDEO  
TINT  
SHARP  
COLOR  
BRIGHT  
CONT.  
VOLUME  
POWER  
Figure 4. Front Panel of Monitor  
6
C2906M (7/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
ELECTRICAL  
Input Voltage:  
100-240 VAC, 50/60 Hz, automatic switching  
45 watts  
450 TV lines, center of screen  
14-inch (35.56 cm) diagonal  
10%  
Power Consumption:  
Horizontal Resolution:  
Visual Picture Size:  
Sweep Linearity:  
Speaker Output:  
1.0 watt (-3 dBV)  
GENERAL  
Input/Output  
Video:  
2 BNC inputs, 75 ohms or Hi-Z  
2 looping outputs  
3 RCA inputs, Hi-Z  
3 looping outputs  
1 DIN input  
Audio:  
S-Video:  
Construction:  
Finish  
Steel cabinet  
PMC14H:  
PMC14H-GY  
Dimensions:  
Black  
Gray  
13.76 (W) x 12.89 (H) x 14.59 (D) inches  
(34.8 x 32.7 x 37.0 cm)  
30.6 lb (14 kg)  
Weight:  
ENVIRONMENTAL  
Operating Temperature: 32° to 106°F (0° to 41°C)  
Humidity: 10% to 85% (non-condensing)  
(Design and product specifications subject to change without notice.)  
REVISION HISTORY  
Manual #  
Date  
Comments  
C2906M  
7/03  
Original version.  
® Pelco and the Pelco logo are registered trademarks of Pelco.  
C2906M (7/03)  
© Copyright 2003, Pelco. All rights reserved.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY AND RETURN INFORMATION  
WARRANTY  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to  
obtain a Repair Authorization number (RA), and provide the following information:  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment. Exceptions to this warranty are  
as noted below:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and MC3500/  
MC3600 Series); two years on all other cameras.  
Three years on Genex® Series (multiplexers, server, and keyboard) and 090 Series  
Camclosure® Camera System.  
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions  
stated above, please include a written explanation with the product when returned.  
Two years on 100/150, 200 and 300 Series Camclosure® Camera Systems.  
Two years on all standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM8500/CM9500/CM9740/CM9760 Matrix, DF5  
and DF8 Series Fixed Dome products.  
Method of return shipment shall be the same or equal to the method by which the item was received by  
Pelco.  
Two years on Spectra®, Esprit®, and PS20 Scanners, including when used in continuous  
motion applications.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100  
or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if  
returned for repair).  
Two years on Esprit and WW5700 series window wiper (excluding wiper blades).  
Eighteen months on DX Series digital video recorders.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and  
freight should be prepaid. Ship to the appropriate address below.  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the  
specific use or application made of the Products. Pelco’s liability for any claim, whether based on  
breach of contract, negligence, infringement of any rights of any party or product liability, relating  
to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no  
event will Pelco be liable for any special, incidental or consequential damages (including loss of  
use, loss of profit and claims of third parties) however caused, whether by the negligence of  
Pelco or otherwise.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:  
Intermediate Consignee  
American Overseas Air Freight  
320 Beach Road  
Burlingame, CA 94010  
USA  
Ultimate Consignee  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/  
96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your  
local dealer for procedures for recycling this equipment.  
World Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Security Camera C2913M F 08 05 User Manual
Pella Window 801U0102 User Manual
Philips Clock Radio AJ3150 11W User Manual
Philips Clock Radio AJ312017 User Manual
Philips Stereo Receiver SWS2325W User Manual
Philips TV Antenna 40PFL8664H User Manual
Planet Technology Thermostat FST 801 User Manual
Powermate Portable Generator PM0418000 User Manual
Precor Tent C764 User Manual
Primera Technology DVD Recorder Archival Appliance User Manual