Pelco Car Video System C2931M97 05 User Manual

C2931M (7/05)  
PMCD750 DLPDisplay  
Removable On-Screen Code Chart  
The PMCD750 will flash a sequence of red and amber lights on the screen to indicate current status or if a fault exists. Cut out these cards for convenient  
referencing of the on-screen codes.  
Condition  
Priority  
Each block represents 0.2 seconds  
R
Door open  
1
2
R
R
R
R
R
R
R
R
R
Power supply fan failed  
DLP fan failed  
Amber  
Amber  
3
R
350V failed  
4
R
R
R
R
R
Amber  
Optical engine failed  
5
Amber  
R
Lamp failed  
6
R
R
Lamp off (wait, auto off)2  
Wait (lamp off, cooling)  
Lamp off (lamp saver)3  
Lamp off (ready to turn on)  
Lamp striking (starting)  
Lamp on, no alarms  
7
Amber  
Amber  
Amber  
8
R
R
9
Amber  
Amber  
Amber  
Amber  
Amber  
Amber  
R
10  
11  
12  
Amber on continuously  
R = Red  
To show the code, press MONITOR button once.  
1With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the  
on-screen code automatically.  
2Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.  
3A Lamp On command from the remote or from RS-232 commands will turn lamp on.  
Condition  
Priority  
Each block represents 0.2 seconds  
R
Door open  
1
2
R
R
R
R
R
R
R
R
R
Power supply fan failed  
DLP fan failed  
Amber  
Amber  
3
R
350V failed  
4
R
R
R
R
R
Amber  
Optical engine failed  
5
Amber  
R
Lamp failed  
6
R
R
Lamp off (wait, auto off)2  
Wait (lamp off, cooling)  
Lamp off (lamp saver)3  
Lamp off (ready to turn on)  
Lamp striking (starting)  
Lamp on, no alarms  
7
Amber  
Amber  
Amber  
8
R
R
9
Amber  
Amber  
Amber  
Amber  
Amber  
Amber  
R
10  
11  
12  
Amber on continuously  
R = Red  
To show the code, press MONITOR button once.  
1With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the  
on-screen code automatically.  
2Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.  
3A Lamp On command from the remote or from RS-232 commands will turn lamp on.  
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com  
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150  
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120  
Pelco and the Pelco logo are registered trademarks of Pelco.  
DLP is a registered trademark of Texas Instruments, Inc.  
©Copyright 2005, Pelco. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Water Dispenser C2237M User Manual
Philips Electric Shaver QT4050 User Manual
Philips Home Theater System LX2610D User Manual
Philips Universal Remote Universal Home Theater Remote Control User Manual
Pioneer Electronic Keyboard DDJ SB User Manual
Pitco Frialator Pasta Maker RSCPE14 User Manual
Planet Technology Network Router WAP 4030A User Manual
Plustek Scanner Plustek PS506U SmartOffice Series User Manual
Polaroid Digital Camera MicroCam User Manual
PYLE Audio Headphones PHPNC45 User Manual