Peavey Portable Speaker Quadra 10 User Manual

S P E C I F I C A T I O N S  
Quadra10  
Available in  
Black and White  
1.6 kHz — 5 kHz:  
Horiz. 90o 5o  
10% rated power  
2nd Harmonic:  
Frequency response, 1 meter  
on-axis, swept-sine in anechoic  
environment:  
Vert. 70o 10o  
100 Hz:  
1 kHz:  
2.36%  
1.36%  
5 kHz — 16 kHz:  
Horiz. 80o 10o  
Vert. 45o 10o  
74 Hz — 18 kHz ( 3 dB)  
3rd Harmonic:  
100 Hz:  
1 kHz:  
Usable low frequency limit  
(-10 dB point):  
57 Hz  
1.06%  
2.18%  
Directivity factor, Q (Mean):  
Crossover frequency (internal  
passive):  
Low Frequency — Mid Frequency:  
8.88 4.65  
Power handling:  
Full Range:  
Directivity index, Di (Mean):  
8.89 dB 2.04 dB  
250 W continuous  
500 W program  
1,000 W peak  
2.2 kHz  
Transducer complement:  
Low frequency section:  
1x 10" woofer, vented  
10" long throw heavy-duty woofer  
High frequency section:  
1x 1" exit/34 mm voice coil  
compression driver 14XTon a  
CD horn  
Time offset:  
Low Frequency:  
High Frequency:  
0.00 ms  
Horn spatially  
aligned ms  
Sound pressure level, 1 Watt,  
1 meter in anechoic environment:  
Full Range:  
Impedance (Z):  
Full Range:  
Nominal:  
96.0 dB SPL, (2.83 V input)  
Maximum sound pressure level  
(1 meter):  
Full Range:  
8.0 Ω  
6.7 Ω  
Minimum:  
Box tuning frequency:  
Low frequency section:  
75 Hz  
Input connections:  
120.0 dB SPL continuous  
126.0 dB SPL peak  
Screw terminal strip (one pair) for full-  
range inputs  
Harmonic distortion:  
1% rated power  
2nd Harmonic:  
Radiation angle measured at -6 dB  
point of polar response:  
500 Hz — 1.6 kHz:  
100 Hz:  
1 kHz:  
0.94%  
0.23%  
Horiz. 120o 25o  
Vert. 115o 20o  
3rd Harmonic:  
100 Hz:  
1 kHz:  
2.50%  
0.95%  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input connection to the system is  
made via screw terminal strip (one pair) for  
full-range inputs.  
The internal passive crossover  
features Sound GuardII tweeter protection  
circuit, an advanced topology crossover with  
high performance components, to provide  
high power handling and reliability. Peavey’s  
proprietary high-frequency driver protection  
circuitry, Sound Guard, provides long and  
medium-term driver overload protection  
without impairing musical transients or  
dynamics. The crossover provides driver  
roll-off and protection, as well as driver EQ  
for the woofer and horn; the sum total is a  
crystal clear and very smooth response.  
High-quality, reliable crossover components  
include polypropylene capacitors, and high  
current inductors and input connectors. The  
optimal integration of the crossover with the  
selected drivers results in a smooth  
Harmonic Distortion : 10% Rated Power  
130  
120  
110  
100  
90  
80  
70  
60  
50  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
frequency response from 74 Hz to 18 kHz.  
Despite its compact dimensions, this  
enclosure can put out some very serious  
sound levels, and take 500 Watts program  
of clean amplifier power, resulting in an  
outstanding amount of clean coverage with  
amazing clarity.  
Frequency response  
This measurement is useful in  
determining how accurately a given unit  
reproduces an input signal. The frequency  
response of the Quadra 10 is measured at a  
distance of 1-meter using a 1 Watt (into the  
nominal impedance) swept-sine input signal.  
As shown in figure 1, the selected drivers in  
the Quadra 10 combine to give a smooth  
frequency response from 74 Hz to 18 kHz.  
Directivity  
Beamwidth is derived from the -6 dB  
points from the polar plots (see figure 3)  
which are measured in a whole space  
anechoic environment. Q and Directivity  
Index is plotted for the on-axis  
measurement position. These are  
specifications that provide a reference to the  
coverage characteristics of the unit. These  
parameters provide insight for proper  
placement and installation in the chosen  
environment. The blending of the  
components of the Quadra 10 exhibit a  
desirable beamwidth and directivity (figure 3  
and 4) suitable for sound reinforcement  
applications.  
Harmonic Distortion : 1% Rated Power  
130  
120  
110  
100  
90  
Power Handling  
There are many different approaches  
to power handling ratings. Peavey rates this  
loudspeaker system’s power handling using  
a full-range form of the AES Standard 2-  
1984. Using audio band 20 Hz to 20 kHz  
pink noise with peaks of four times the RMS  
level, this strenuous test signal assures the  
user that every portion of this system can  
withstand today’s high technology music.  
80  
70  
60  
50  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
This rating is contingent upon having a  
minimum of 3 dB of amplifier headroom  
available.  
high by 14.00 inches wide by 13.19 inches  
deep. The weight shall be 31 pounds.  
The loudspeaker system shall be an  
Architectural Acoustics model Quadra 10.  
Architectural and Engineering  
Specifications  
The loudspeaker system shall have an  
operating bandwidth of 74 Hz to 18 kHz.  
The nominal output level shall be 96.0 dB  
when measured at a distance of one  
meter with an input of one Watt. The  
nominal impedance shall be 8.0 Ohms.  
The maximum continuous power handling  
shall be 250 Watts, maximum program  
power of 500 Watts and a peak power  
input of at least 1,000 Watts, with a  
minimum amplifier headroom of 3 dB.  
The nominal radiation geometry shall be  
90 degrees in the horizontal plane and  
40 degrees in the vertical plane. The  
outside dimensions shall be 18.75 inches  
Harmonic Distortion  
Second and third harmonic distortions  
vs. frequency are plotted in figures 5 and  
6 for two power levels, ten percent (10%)  
of rated input power and either one  
percent (1%) of rated input power or one  
Watt, whichever is greater. Distortion is  
read from the graph as the difference  
between the fundamental signal  
(frequency response) and the desired  
harmonic. As an example, a distortion  
curve that is down 40 dB from the  
fundamental is equivalent to 1% distortion.  
3 + 2 YEAR LIMITED WARRANTY  
NOTE: For details, refer to the  
warranty statement. Copies of  
this statement may be obtained  
by contacting Peavey Electronics  
Corporation, P.O. Box 2898, Meridian,  
Mississippi 39301-2898.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quadra10  
Horizontal Polar Patterns 6 dB per Division  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
200 Hz  
250 Hz  
315 Hz  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
500 Hz  
630 Hz  
400 Hz  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
800 Hz  
1 kHz  
1.25 kHz  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
1.6 kHz  
2 kHz  
2.5 kHz  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quadra10  
Horizontal Polar Patterns 6 dB per Division  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
3.15 kHz  
4 kHz  
5 kHz  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
8 kHz  
10 kHz  
6.3 kHz  
0o  
0o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
12.5 kHz  
16 kHz  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quadra10  
Vertical Polar Patterns 6 dB per Division  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
200 Hz  
250 Hz  
315 Hz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
500 Hz  
630 Hz  
400 Hz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
800 Hz  
1 kHz  
1.25 kHz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
1.6 kHz  
2 kHz  
2.5 kHz  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quadra10  
Vertical Polar Patterns 6 dB per Division  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
3.15 kHz  
4 kHz  
5 kHz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
8 kHz  
10 kHz  
6.3 kHz  
90o  
90o  
60o  
60o  
30o  
30o  
0o  
0o  
-30o  
-30o  
-60o  
-60o  
-90o  
-90o  
16 kHz  
12.5 kHz  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quadra10 INPUT  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES:  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES:  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features and specifications subject to change without notice.  
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301  
©2001  
Printed in the U.S.A. 8/01  
80304831  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Car Video System 200P6 User Manual
Philips Computer Hardware SAA7785 User Manual
Philips Digital Camera 220X User Manual
Philips Power Supply ADAT 4 User Manual
Philips TV DVD Combo 28PD6932 User Manual
Polk Audio Speaker RTi12 User Manual
Professional Series Fan PS77611 User Manual
ProForm Exercise Bike PFEX724111 User Manual
ProForm Treadmill PFTL79022 User Manual
PYLE Audio Car Video System PLRDVD13 User Manual