PLATINUM ® • CONDENSING GAS WATER HEATER
STAINLESS STEEL TANK
TANK SERIES 70 GALLONS
MODEL NUMBER
Input Btu/h
GPH Recovery Rate at 40°F to 140°F
Storage Capacity - gallons
X
199 SS A-PN
199,000
221
299 SS A-PN
299,000
340
399 SS A-PN
399,000
444
80
70
70
1st Hour Delivery (100°F ΔT) - gallons
289
397
501
Hot Outlet and Cold Inlet - NPT
Flue Connection Diameter - inches
Approximate Shipping Weight - lbs
2
3 *
1000
2
4
1100
2
4
1100
Dimensions are in inches unless otherwise noted.
For standard and optional equipment, see form # PV 6811.
* When connected with field provided 3” x 4” adapter of the same material as required for venting (see I&M).
STANDARD GAS PRESSURE REQUIREMENTS
VENTING REQUIREMENTS
MINIMUM FLOW GAS PRESSURE: 4.5" W.C.
MAXIMUM STATIC GAS PRESSURE: 10.5" W.C.
CATEGORY IV - POSITIVE PRESSURE, CONDENSING.
UL CLASSIFIED FOR SCHEDULE 40, SOLID-WALL PVC OR CPVC PIPE.
“SANI” TEMPERATURE HEATER REQUIRES CPVC VENT PIPE
FOR GAS PRESSURES OUTSIDE OF THIS RANGE,
CONTACT YOUR PVI REPRESENTATIVE.
STANDARD ELECTRICAL REQUIREMENTS
SEE INSTALLATION MANUAL FOR VENTING
AND DIRECT COMBUSTION AIR GUIDELINES.
120V, 1Ø, 60 HZ.
MAXIMUM AMP DRAW (TRIAL FOR IGNITION): 6
CONTINUOUS AMP DRAW WHEN FIRING: 1.3
CONTINUOUS AMP DRAW DURING STANDBY: 0.03
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
AND SPECIFICATION WITHOUT NOTICE.
This product is protected by patents in
the U.S., Canada and Mexico.
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
PV 6812 09/08
y
Download from Www.Somanuals.com. All Manuals Search And Download.
|