PLUS Vision Projector U5 432 User Manual

DATA PROJECTOR  
U5-432/U5-332  
User’s Manual  
S O U R C E  
A U T O  
A N D B Y  
S T  
A N D B Y  
S T  
S T A T U S  
4
M
Z O O  
3
R
V O L  
2
I M  
1
C
E
T
C A N  
R - C L I C K /  
M
N
E
Z
E
R
F
R
E
Q
K
E
I
Q
O
T
A
R
E
O
S
U
L
I D  
V
B
G
Y
B
D
N
A
T
S
IMPORTANT  
* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-  
ments Incorporated (U.S.A.).  
* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).  
* S-VGA is a registered trademark of Video Electronics Standards Association.  
* Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries).  
* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).  
Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies  
and to the product trademarks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INFORMATION  
Important Safeguards  
These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them  
carefully and heed all warnings.  
Installation  
For best results, use the unit in a darkened room.  
Place the unit on a flat, level surface in a dry area away from dust and moisture.  
Do not place the unit in direct sunlight, near heaters or heat radiating appliances.  
Exposure to direct sunlight, smoke or steam can harm internal components.  
Handle the unit carefully. Dropping or jarring can damage internal components.  
Do not place heavy objects on top of the unit.  
Power Supply  
The unit is designed to operate on a power supply of 100 – 120/220 – 240 V 50/60 Hz AC. Ensure that your  
power supply fits these requirements before attempting to use the unit.  
Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or  
fire.  
Disconnect the power cable (mains lead) from the power outlet after using the unit.  
Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or  
in green).  
Cleaning  
Disconnect the power cable (mains lead) from the unit.  
Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use  
strong detergents or solvents such as alcohol or thinner.  
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.  
Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated  
dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.  
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice  
tool, to prevent the damage to the unit.  
Lamp Replacement  
Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000  
hours of usage, the lamp will turn off.  
Fire and Shock Precautions  
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside  
the unit. Allow at least 10 cm (3 inches) of space between the unit and walls.  
Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve  
any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If  
something should fall into the unit, immediately disconnect the power cable from the unit and have the object  
removed by a qualified PLUS service person.  
Do not place any liquids on top of the unit.  
Cautions on Handling the Storage Case  
Do not put anything other than the unit or its accessories in the storage case.Paper clips, staples or other metal  
or foreign objects getting inside could cause fire or electric shock.  
Do not swing the storage case around when the unit is inside. Also do not force objects that are too large to fit  
into the storage case. Doing so could scratch or damage the unit.  
When Moving the Unit  
When moving the unit to a different place, put it in the included storage case and place the storage case in an  
insulating package to protect against falls and shocks.  
If there are paper clips, staples or other metal or foreign objects inside the storage case, the objects could get  
inside the unit while the unit is being moved, causing fire or electric shock when the power is turned on.  
CAUTION – HOT!  
The area around the exhaust vents is hot during and immediately after image projection.  
To avoid burns, keep your hands away from this area.  
Wait until the exhaust vents area cools off before touching it.  
Do not look into the lens while the unit is on. Serious damage to your eyes could result.  
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.  
Major Features  
Lightweight high-intensity projector  
The synergy of the DLP™ (Digital Light Processing) display system and our own optical design serve to improve the optical  
utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DMD (Digital  
Micromirror Device of high precision). These factors have enabled a design that offers both high intensity and small size/  
lightweight features.  
Sharp, clear picture  
The DLP™ display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting  
the display of small characters and diagrams with distinct clarity.  
Industry’s first B/W mode for switching from the color mode to an image with a stronger brightness  
Applicable Projector: U5-432  
When projecting documents, spreadsheets or other mostly black and white data, the image can be projected with stronger  
brightness than in the color mode by switching to the “Color B/W Switching” in the menu settings.This function is a first for a  
projector, and takes advantage of the features of high contrast rate DLP projectors.  
Powerful functions for presentations  
A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used  
when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC  
signal.  
A presentation timer that supports presentations and a security lock function protecting against unauthorized projection have  
also been added.  
High contrast ratio of 2000:1  
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio.  
By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just  
the brightness based on specifications.  
Beautiful reproduction of high-quality images from DVD  
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD  
and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLP™  
display system projector.  
Econo-mode switch function for the lamp output  
Using the lamp Econo-mode will extend the life of the lamp and lower the power consumption.  
By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy  
conservation and ecology.  
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.  
Table of Contents  
IMPORTANT SAFETY INFORMATION ................................................................................... E-2  
Major Features ....................................................................................................................... E-4  
Table of Contents ................................................................................................................... E-5  
Checking the Supplied Accessories .................................................................................... E-7  
Names of the Main Unit Parts ............................................................................................... E-9  
Names of the Remote Control Parts/Preparing the Remote Control .............................. E-11  
Names of Parts/Preparing the Remote Control Unit  
Included with the U5-432 and U5-332 ....................................................................... E-11  
Remote Control Range ............................................................................................. E-13  
The Procedure Up to Projecting to the Screen ................................................................. E-14  
Placement Guide .................................................................................................................. E-15  
U5-432/U5-332 Screen Size and Projection Distance .............................................. E-15  
Connecting Personal Computers and Video Equipment .................................................. E-18  
Connections with Personal Computer ....................................................................... E-18  
Connect the projector’s RGB connector using the included RGB signal cable. .. E-18  
To Output the External Output Signal of a Notebook Computer ......................... E-19  
Connections with Composite Signals ........................................................................ E-20  
Video Equipment with VIDEO Connectors .......................................................... E-20  
Video Equipment with S-VIDEO Connectors ...................................................... E-20  
Connections with Component Signals....................................................................... E-21  
When the Video Equipment Has a YCbCr Connector or YPbPr Connector ........ E-21  
Connections with the AUDIO Jack ............................................................................ E-22  
Power Cable Connections and Switching the Power On/Off ........................................... E-23  
Operating................................................................................................................... E-23  
Finishing .................................................................................................................... E-25  
Adjustment of the Projection Screen ................................................................................. E-26  
Adjustment of the Projection Screen ......................................................................... E-26  
Making Adjustments with the Adjusters .............................................................. E-27  
General Operation ................................................................................................................ E-28  
Input Selection .......................................................................................................... E-28  
Automatic Adjustment ............................................................................................... E-29  
Freezing a Moving Picture ......................................................................................... E-30  
Cancelling Video and Audio Temporarily ................................................................... E-30  
Adjustment of the Volume.......................................................................................... E-31  
Enlargement of the Image and Video Movement ...................................................... E-32  
Using the Presentation Timer .................................................................................... E-33  
Using the Laser Pointer ............................................................................................. E-34  
Performing Mouse Operations on the Computer  
with the Remote Control Unit .................................................................................... E-35  
Controlling the Projector from a Computer ................................................................ E-36  
Use as a High-Brightness Monochrome Projector .................................................... E-36  
Protecting the Projector with the Security Lock ......................................................... E-37  
Using the Quick Menu ............................................................................................... E-39  
Menu Operation Method ...................................................................................................... E-40  
Performing Menu Operations .................................................................................... E-42  
List of Item Names Offering Input Selection and Adjustments/Settings .................... E-45  
Image ..................................................................................................................................... E-47  
Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-47  
Picture Adj. / Fine Picture / H Position / V Position .................................................... E-47  
Reset ......................................................................................................................... E-48  
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.  
Table of Contents  
Color...................................................................................................................................... E-49  
Quick Color Adj. ........................................................................................................ E-49  
Gamma ..................................................................................................................... E-49  
Color Temp. ............................................................................................................... E-50  
White ......................................................................................................................... E-50  
Color Space .............................................................................................................. E-50  
White Balance ........................................................................................................... E-51  
View ....................................................................................................................................... E-52  
Aspect ....................................................................................................................... E-52  
Filter .......................................................................................................................... E-52  
Vertical Flip / Horizontal Flip...................................................................................... E-53  
Keystone.................................................................................................................... E-53  
Keystone Save .......................................................................................................... E-53  
Setup ..................................................................................................................................... E-54  
Color B/W Switching ................................................................................................. E-54  
Auto Source............................................................................................................... E-54  
Auto Power Off .......................................................................................................... E-54  
Menu Position ............................................................................................................ E-55  
Lamp Mode ............................................................................................................... E-55  
Input Format .............................................................................................................. E-56  
Presentation Timer .................................................................................................... E-56  
Option ................................................................................................................................... E-57  
Language .................................................................................................................. E-57  
On Screen ................................................................................................................. E-57  
Background ............................................................................................................... E-57  
Startup Screen .......................................................................................................... E-58  
Security Lock ............................................................................................................. E-58  
Info......................................................................................................................................... E-59  
Status ........................................................................................................................ E-59  
Factory Default .......................................................................................................... E-59  
Lamp Timer Reset ..................................................................................................... E-59  
Resolution / Frequency ............................................................................................. E-60  
Lamp Timer ............................................................................................................... E-60  
When an Indicator is Lit or Flashing .................................................................................. E-61  
Troubleshooting ................................................................................................................... E-62  
Cleaning ................................................................................................................................ E-63  
Replacing the Lamp Cartridge ............................................................................................ E-64  
Specifications ....................................................................................................................... E-67  
Table of Supported Frequency ........................................................................................... E-68  
Cabinet Dimensions ............................................................................................................ E-69  
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.  
Checking the Supplied Accessories  
Remove the main unit and the accessories from the box and check that the following items are included.  
Wireless remote control unit with laser pointer [1] /  
Size AAA batteries [2]  
This controls the projector. (See Page E-11.)  
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1]  
This cable is used in the connection of video equipment that  
has an S-video connector.Connections are described on Page  
E-20.  
No. 777704000  
4
Z O O M  
3
V
1
2
T I M E R  
C A N C E L  
R - C L I C K /  
M U T E  
Z
E
F R  
Q
E N T E R  
Q U I C K  
A U T O  
L A S E R  
V I D E O  
M E N U  
R G B  
A N D B Y  
S T  
RGB signal cable  
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]  
This is used in making connections with a personal computer.  
See Page E-18 about connections.  
No. 777709000  
Video cable (RCA pin plug, 2 m / 6.6 feet) [1]  
This cable is used in the connection of video equipment that  
has a video connector. Connections are described on Page E-  
20.  
No. 777703000  
Audio cable (Mini plug, 2 m / 6.6 feet) [1]  
This cable is used with equipment that has phono type audio  
jacks. Connections are described on Page E-22.  
No. 777705000  
Audio conversion cable (Mini-jack/ RCA pin plug, 15 cm /  
0.5 feet) [1]  
This cable is used with equipment whose audio connector is  
of the phono pin type. Connections are described on Page E-  
22.  
No. 777706000  
Power cable (1.8 m / 5.9 feet) [1]  
This power cable supplies power to the unit. See Page E-23  
about connections.  
USB cable (type A, 2 m / 6.6 feet) [1]  
Used to perform mouse operations on a computer using the  
projectors remote control unit. Connections are described on  
Page E-35.  
No. 777707000  
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.  
Checking the Supplied Accessories  
Storage case (for projector and accessories) [1]  
This case is designed to hold the projector itself and its acces-  
sories.  
HOW TO PUTTHE PROJECTOR INTO THE STORAGE CASE  
Close the lens shutter or lens cap before putting the projec-  
tor in its case, then fasten the projector in place with the  
Velcro belt. Place the accessories in the storage pocket.  
Use it when storing the projector.  
Velcro strap  
Pocket  
E
C
R
U
O
S
O
T
U
A
Y
B
D
N
A
T
S
Y
B
N D  
A
T
S
U
T
A
Cable storage pouch [1]  
Users Manual (CD-ROM Edition) [1]  
Users Manual (Simplified Edition) [1]  
WARNING”  
Handling the cables supplied with this product, will  
expose you to lead, a chemical known to the State of  
California to cause birth defects or other reproduc-  
tive harm.  
Wash hands after handling.  
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.  
Names of the Main Unit Parts  
S O U R C E  
A U T O  
A N D B Y  
S T  
A N D B Y  
S T  
S T A T U S  
Zoom ring [E-26]  
Focus ring [E-27]  
Exhaust vents  
Ventilation slots  
Remote control  
sensor [E-13]  
Adjuster button [E-27]  
(Also on opposite side)  
Lens  
Lens cap  
Remove before use.Attach  
the lens cap after use to  
protect the lens.  
Ventilation slots  
Lamp cover [E-65]  
Adjusters [E-27]  
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.  
Names of the Main Unit Parts  
STATUS  
STANDBY  
STANDBY  
AUTO  
STATUS indicator [E-23, 61]  
STANDBY indicator [E-23, 61]  
STANDBY button [E-23]  
AUTO button [E-28]  
SOURCE  
SOURCE button [E-28]  
Remote control sensor [E-13]  
STATUS  
ST  
ANDBY  
ST  
ANDBY  
AUTO  
SOURCE  
RGB  
S
VIDEO  
VIDEO  
AC IN connector [E-23]  
AUDIO  
MOUSE  
PC CO
Speaker  
Ventilation slots  
Built-in security slot  
(See description below.)  
MOUSE connector [E-35]  
AUDIO connector [E-22]  
RGB  
S VIDEO  
VIDEO  
PC CONTROL  
AUDIO MOUSE  
VIDEO connector [E-20]  
S-VIDEO connector [E-20]  
PC CONTROL connector  
(D-Sub 9-pin) [E-36]  
RGB connector [E-18, 21]  
Built-in Security Slot  
This security slot supports the MicroSaver Security System manufactured by  
Kensington Microware Inc.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the Remote Control Parts/Preparing the Remote Control  
Refer to the description (and diagram) for the remote control unit included with your projector.  
Names of Parts/Preparing the Remote Control Unit  
Included with the U5-432 and U5-332  
Names of the Remote Control Parts  
Infrared transmitter [E-13]  
Laser transmitter [E-34]  
L-CLICK button [E-35]  
LASER button [E-34]  
(Turns the laser point on and off)  
STANDBY button [E-23, 25]  
This button is used to switch ON  
the power aand set the unit to the  
STANDBY mode.  
STANDBY  
LASER  
AUTO button [E-28]  
(Automatic adjustment of the RGB  
moving image)  
VIDEO  
RGB  
AUTO  
Buttons used for input selection  
[E-28]  
RGB button and VIDEO button  
(VIDEO / S-VIDEO)  
MENU  
QUICK  
QUICK button [E-39]  
(Displays a simplified menu)  
Q
Buttons used for the PC mouse  
function [E-35]  
(JOG button and R-CLICK button)  
Buttons used for menu operations  
[E-40]  
The  
,
,
and  
buttons are  
R-CLICK/  
CANCEL  
ENTER  
the select (̆, ̄, ̇ and ̈) buttons.  
TIMER button [E-33]  
(Presentation timer time setting  
display)  
TIMER  
FREEZE MUTE  
FREEZE button [E-30]  
(Freezes moving pictures)  
MUTE button [E-30]  
(Temporarily cancels the video and  
audio)  
1
VOL  
2
ZOOM  
VOL button [E-31]  
(Volume adjustment)  
ZOOM button [E-32]  
(Digital zoom adjustment)  
3
4
Number buttons [E-37]  
(Used for the security lock.)  
Note:  
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume  
transferring signals, press the button again.  
Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button.  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the Remote Control Parts/Preparing the Remote Control  
Inserting the Batteries  
When using the remote control for the first time, install the batteries that were supplied.  
Slide the battery compartment cover (located on the  
1bottom of the remote control) and pull off.  
Insert the batteries to match the "+" and "" as indi-  
2cated inside the compartment.  
(A) Leaving a little space in the front, close the lid, (B)  
3then with the back pressed tightly, (C) press the lid  
towards the front.  
(B)  
(A)  
(C)  
* When replacing batteries, purchase two of the same type of AAA battery.  
* DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the Remote Control Parts/Preparing the Remote Control  
Remote Control Range  
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit  
and operate.  
Reception of the remote control signal should generally be possible within the range illustrated below.  
Side View  
Remote control  
infrared transmitter  
30°  
30°  
20°  
20°  
Remote control  
sensor  
5m/16.4feet  
Top View  
30°  
30°  
Remote control  
infrared transmitter  
Remote control  
sensor  
5m/16.4feet  
Precautions  
Handling of the Remote Control  
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the  
obstruction of the signal by an obstacle located in the pathway may prevent operation.  
* Do not drop the remote control or handle it inappropriately.  
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry  
immediately.  
* Try to avoid use in hot and/or humid locations.  
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care  
of a doctor.  
* Remove the batteries from the remote control when it is not going to be used for a long period.  
* Some operations (such as menu operations) are available only through the use of the remote control and attention  
should be given to its careful handling.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Procedure Up to Projecting to the Screen  
Perform setup adjustments in the following order.  
1
2
Position the projector  
Determine the locations to set up the screen and the projector.  
See Placement Guideon Page E-15.  
Connect the video equipment and personal computer  
Connect your equipment to the projector.  
When making connections with the personal computers RGB connector, see Connections with  
Personal Computeron Page E-18.  
When making connections with the video equipments video connector or an S-video connector,  
see Connections with Composite Signalson Page E-20.  
When making connections with the video equipments YCbCr connector or YPbPr connector,  
see Connections with Component Signalson Page E-21.  
When playing the audio through the built-in speaker of the projector, see Connections with the  
AUDIO Jackon Page E-22.  
3
4
Opening the lens cap  
Connecting the power cable and switching on the power  
See Operatingon Page E-23.  
See Finishingon Page E-25.  
5
When selecting the language of menu displays, etc.  
(Only when the power is first switched on following purchase)  
See When [Menu Language Select] Is Displayed Upon Switching On the Poweron Page E-24.  
6
7
8
9
Switching on the power of the personal computer and video equipment  
Properly adjust the projection image to the screen  
See Adjustment of the Projection Screenon Page E-26.  
Selecting input equipment  
See Input Selectionon Page E-28.  
Adjust the screen or video image  
Adjust the image to the optimum condition as required.  
See the Table of Contents for the adjustment items.  
About DLP projectors  
Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may  
be black spots or bright spots among the picture elements.  
Note:  
* Please purchase a screen.  
* A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr  
connectors.  
* A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other  
equipment with YPbPr connectors.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placement Guide  
Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or  
to find out the approximate size of a screen that will be required.  
Refer to the projection distance table for your projector model.  
When suspending the projector from the ceiling, change the projection method. See Vertical Flipon E-53.  
U5-432/U5-332 Screen Size and Projection Distance  
The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.81 m (45.31 feet).The projector  
should be placed within this range.  
Screen Size Designation (Inches)  
300"  
Height from center of lens  
to top edge of the  
projection  
250"  
200"  
h1  
150"  
Height from center of lens  
to bottom edge of the  
projection  
120"  
100"  
80"  
40"  
h2  
33"  
27"  
60"  
45.31)  
1.20  
(3.94)  
STA  
TUS  
ST  
A
NDB  
Y
ST  
A
NDB  
37.73)  
11.50  
Y
AUT  
O
RG  
SOU  
RCE  
B
S
V
1.48  
IDE  
O
VID  
EO  
AUD  
IO  
MO  
USE  
4.86)  
PC  
CON  
TRO  
L
13.81(37.73  
1.23  
30.15)  
9.57  
1.80  
(4.04  
5.91)  
Unit: m (feet)  
2.73  
1.49  
(4.89  
11.50(31.40  
8.96)  
11.98)  
22.57)  
14.99)  
18.04)  
2.26  
(7.41  
9.19(25.10  
Lens surface of the  
main unit  
3.65(9.94  
7.65  
3.03  
6.88(18.80  
4.57(12.47  
5.50(14.99  
5.73  
3.80  
4.57  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placement Guide  
Width  
Screen size (Diagonal)  
Height  
Screen Size Width x Height  
Projection Distance  
(m) (feet)  
Wide Tele Wide Tele  
Height h1  
Height h2  
Screen Size  
Designation (Inches)  
(m)  
(feet)  
(m)  
(feet)  
(m)  
(feet)  
1.57  
1.94  
0.23  
0.30  
0.36  
0.52  
0.72  
0.89  
1.05  
1.31  
1.77  
2.20  
2.66  
27"  
33"  
0.56
ן
0.41  
0.67
ן
0.50  
0.81
ן
0.61  
1.21
ן
0.91  
1.62
ן
1.21  
2.03
ן
1.52  
2.43
ן
1.82  
3.04
ן
2.28  
4.06
ן
3.04  
5.08
ן
3.81  
6.09
ן
4.57  
— – 1.20  
1.23 1.48  
1.49 1.80  
2.26 2.73  
3.03 3.65  
3.80 4.57  
4.57 5.50  
5.73 6.88  
7.65 9.19  
9.57 11.50  
11.50 13.81  
0.48  
0.59  
0.72  
1.07  
1.43  
1.79  
2.14  
2.68  
3.58  
4.48  
5.38  
0.07  
0.09  
0.11  
0.16  
0.22  
0.27  
0.32  
0.40  
0.54  
0.67  
0.81  
— – 3.94  
4.04 4.86  
4.89 5.91  
7.41 8.96  
9.94 11.98  
12.47 14.99  
14.99 18.04  
18.80 22.57  
25.10 30.15  
31.40 37.73  
37.73 45.31  
1.83 
ן
 1.35  
2.19 
ן
 1.64  
2.65 
ן
 2.00  
3.96 
ן
 2.98  
5.31 
ן
 3.96  
6.66 
ן
 4.98  
7.97 
ן
 5.97  
9.97 
ן
 7.48  
13.32 
ן
 9.97  
16.66 
ן
12.50  
19.98 
ן
14.99  
2.36  
40"  
3.51  
60"  
4.69  
80"  
5.87  
100"  
120"  
150"  
200"  
250"  
300"  
7.02  
8.79  
11.75  
14.70  
17.65  
* There is a tolerance of 5% due to design values.  
* This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition  
(with front and rear adjusters fully withdrawn).  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placement Guide  
Installation Height of Projection Screen [Reference]  
Once the installation location and position have been decided, the projection height should be checked. In the case of large  
screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.  
The required installation height can be found using the following formula:  
[Height from center of lens to top edge of the projection] m (feet) + 0.05m (0.16 feet) + Stand height  
Example: Using a 150" 4:3 screen and placing the projector horizontally, the required installation height will be  
2.68m (8.79 feet) + 0.05m (0.16 feet) = 2.73m (8.95 feet) (without a stand)  
An installation room with a height of 2.4m (7.87 feet) will have insufficient room height even when the projector is placed on  
the floor. (Note that the rear adjusters can be raised to lower the projection screen image.)  
Screen size vertical dimension  
Lens center  
Screen size top  
edge dimension  
measured from  
floor  
h2 dimension  
Approx. 0.05 m (0.16 feet)  
Stand dimension  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at  
conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip-  
ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home  
theater.  
Connections with Personal Computer  
Please check the following before making connections with the personal computer.  
A suitable resolution for the U5-432/U5-332 is 1024 
ן
 768 dots (XGA) and the maximum displayable resolution is 1280 
ן
 
1024 dots (S-XGA).  
Make changes to a displayable resolution at the personal computer side. Please check with Table of Supported Frequencyon  
Page E-68.  
The setting method for the personal computer will differ depending on the specific model. Please read the personal computer  
instruction manual or the on-line help information, or contact the manufacturer of your personal computer.  
Connect the projector’s RGB connector using the included RGB signal cable.  
When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal  
cable.  
The projector has been set to Autoat the factory; however, if it does not project, please change the input setting to RGB”  
using the menu sequence of [Setup] [Input Format] [RGB].  
See Input Formaton Page E-56.  
If the USB cable is connected to the projectors MOUSE connector, mouse operations can be performed on the computer from  
the projectors remote control unit.  
See Performing Mouse Operations on the Computer with the Remote Control Uniton Page E-35.  
MONITOR OUT  
Personal  
computer  
RGB signal cable (Supplied item)  
Note:  
* Before making connections, check the power of the projector and the equipment to be connected is switched off.  
* When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer  
startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the on-  
line help.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
To Output the External Output Signal of a Notebook Computer  
When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook  
computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your  
notebook computer or the on-line help while performing the following procedure.  
Check whether a signal is being sent from the notebook computer to the projector.  
An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external  
output signal is being output.  
1
REFERENCE: When Resolutionor Frequencyis not displayed under Info.on the menu of the projector, this means that  
the external output signal is not being output from the personal computer. See Resolution/Frequencyon Page E-60.  
Should a sign not be output from the notebook computer, please try the operation described below.  
For an IBM PC/AT compatible computer, press the [Fn] key plus any one of the [F1] to [F10] keys. (See the table below.)  
2
Manufacturer  
DELL  
Model  
Key  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
Fn + F8  
Fn + F8  
Fn + F10  
Fn + F3  
Fn + F7  
Fn + F3  
Fn + F3  
Fn + F5  
Fn + F7  
Fn + F3F5  
Fn + F5  
Fn + F10  
EPSON  
FUJITSU  
iiyama  
IBM  
NEC  
Panasonic  
SHARP  
SONY  
SOTEC  
TOSHIBA  
Victor  
Note: Table information is current to December 2003.  
Note:  
When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be  
correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook  
computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the  
liquid crystal panel which might result in external output only.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with Composite Signals  
Video Equipment with VIDEO Connectors  
Make the connection to the VIDEO connector of the projector using the supplied Video cable.  
The input setting of theVIDEO connector has been set to Autoat the factory; however, if the projector does not project, please  
change the input setting to Your CountrysTelevision Broadcast Systemusing the menu sequence of [Setup] [Input Format]  
[Video].  
See Input Formaton Page E-56.  
Video Equipment with S-VIDEO Connectors  
Make the connection to the S-VIDEO connector of the projector using the supplied S-video cable.  
The input setting of the S-VIDEO connector has been set to Autoat the factory; however, if the projector does not project,  
please change the input setting to Your Countrys Television Broadcast Systemusing the menu sequence of [Setup] [Input  
format] [S-Video].  
See Input Formaton Page E-56.  
Video deck, DVD player, document  
camera, etc.  
S-VIDEO  
VIDEO  
Video cable (Supplied item)  
S-Video cable (Suppled item)  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with Component Signals  
When the Video Equipment Has a YCbCr Connector or YPbPr Connector  
The projector has been set to Autoat the factory; however, if it does not project, please change the input setting to Compo-  
nentusing the menu sequence of [Setup] [Input Format] [RGB].  
See Input Formaton Page E-56.  
When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or  
another color, change the setting under the menu of [Color] [Color Space].  
See Color Spaceon Page E-50.  
Component cable (Available as an option)  
Order code: 28-690  
Green  
Blue  
Red  
Y
Cb  
Cr  
COMPONENT  
COMPONENT  
Y
Pb  
Pr  
Green  
Blue  
Red  
Component cable (Available as an option)  
Order code: 28-690  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with the AUDIO Jack  
* Make the connection to the projectors AUDIO jack using the supplied audio cable. When the audio jack of the equipment that  
is to be connected is of the RCA phono type, make connection via the supplied audio conversion cable.  
* The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the  
audio output of the video equipment to your audio system.  
* The built-in speaker outputs the audio of the equipment connected to the AUDIO jack.  
White  
AUDIO OUT  
Audio cable (Supplied item)  
L
R
Audio conversion cable  
(Supplied item)  
Red  
Audio cable (Supplied item)  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Cable Connections and Switching the Power On/Off  
There is an order in which the power cable is connected and the power is switched on/off.  
Operating  
1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.  
The STANDBY indicator will light in amber, and the unit will enter the standby mode.  
STATUS  
S
U
TAT  
S
BY  
D
N
A
ST  
ANDBY  
ST  
To wall outlet  
AUTO  
SOURCE  
PC CONTROL  
STANDBY  
Lit amber  
MOUSE  
AUDIO  
VIDEO  
S
VIDEO  
Firmly plug in all the way.  
RGB  
Switch on the projector power  
Press the STANDBY button.  
2
This indicator is also lit green in Eco-mode.  
STATUS  
STATUS  
STATUS  
(button on main unit)  
STANDBY  
The first time the power is switched on after purchase, [Menu  
Language Select] will be displayed. See Page E-24 for infor-  
mation about language selection.  
When the power is turned on, the STANDBY indicator starts  
flashing green, then stops flashing after about 60 seconds. If  
the STATUS indicator lights green at this time, the lamp mode  
is set to Eco. See E-55 for instructions on selecting.  
If the power does not come on, see When the STATUS Indica-  
tor is Lit or Flashingon Page E-61.  
STANDBY  
STANDBY  
STANDBY  
Flashing green  
(Approximately 60  
seconds)  
Lit green  
Power is on  
Lit amber  
If the Passwordinput window is displayed: See E-38.  
A password is set for this projector.  
The projector cannot be used unless the correct password is in-  
put.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
To turn off the power: See E-25.  
Q
The projector is now capable of regular projection.  
Switch on the power of the connected equipment  
3
Note:  
When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached  
easily.  
Press the STANDBY button after the STANDBY indicator is lit in amber.  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Cable Connections and Switching the Power On/Off  
When [Menu Language Select] is Displayed Upon Switching On the Power  
The first time the power is switched on after purchase, [Menu Lan-  
guage Select] will be displayed. Follow the procedure described be-  
low and select the display language of the projector.  
If the image is blurred, turn the focus ring counterclockwise or clock-  
wise to focus it. See Page E-27.  
Cursor  
Press the SELECT ̆̄ buttons of the Remote con-  
trol and align the deep blue cursor with [English].  
1
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
3
4
Press the ENTER button to set.  
This will set the language and [Menu Language Select] will close.  
2
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
3
4
This completes the selection of the display language.  
Caution:  
[Menu Language Select] will not appear the next time the power is switched on.  
Should a change of language become necessary, see “Language” on Page E-57.  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Cable Connections and Switching the Power On/Off  
Finishing  
1 Switch off the power of the connected equip-  
ment  
2 Switch off the power of the projector  
Press the STANDBY button.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
(button on main unit)  
STANDBY  
The [Power Off] display appears.  
When the level gauge reaches maximum, the projection screen  
will go off (in about 5 seconds) and the projector will enter the  
power-off operation.  
Note  
* The operation can be cancelled by pressing a button other than  
the STANDBY button.  
Power Off  
OK  
?
* One more press of the STANDBY button will switch off the power.  
The STANDBY indicator changes to flashing amber and lights a  
steady amber after about 90 seconds (when the unit enters the  
standby mode).  
STATUS  
STATUS  
STATUS  
STANDBY  
STANDBY  
STANDBY  
Flashing amber  
(Approximately 90  
seconds)  
Lit amber  
Standby mode  
Lit green  
3 Unplug the power cable  
Check that the STANDBY indicator is lit in amber and then  
unplug the power cable.  
The STANDBY indicator will go off when the power cable is un-  
plugged.  
Warrning  
Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp  
or damage the projector.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustment of the Projection Screen  
Switch on the power of the connected equipment and make the adjustments with the video signal being input to the  
projector.  
Adjustment of the Projection Screen  
1
Turn the zoom ring to adjust the screen size of the projection image.  
Adjust the image to match the desired screen size. When outside of the adjustment range, move the projector to the rear or  
forward.  
Zoom ring  
Adjust the projection image to the screen.  
Check that the screen is set level and vertically.  
2
(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of  
the projector lens.)  
(2) If the image is shifted vertically, move the image up or down with the adjuster. See Making Adjustments with the Adjust-  
erson Page E-27.  
(3) If the image is slanted, adjust by turning the right or left adjuster. See Making Adjustments with the Adjusterson Page E-  
27.  
(4) A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the  
screen. Set the projector so that it is pointing straight toward the screen.  
(5) If the image shows keystone distortion, adjust using remote control or menu operations. See Keystoneon Page E-53.  
(2)  
(3)  
(1)  
(4)  
(4)  
(3)  
(5)  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustment of the Projection Screen  
Turn the focus ring and adjust the focus of the screen  
3
Focus ring  
Making Adjustments with the Adjusters  
While viewing the projection image, (1) press and hold  
the adjuster buttons located at the left and right and, (2)  
raise the projector to align the image with the screen, then  
release your fingers.  
( )  
1
S O U R C E  
A U T O  
Turn the left and right adjusters for fine adjustment.  
Adjust so that there is no shaking of the projector.  
A N D B Y  
S T  
D B Y  
N
A
S T  
S
S T A T U  
( )  
1
( )  
2
Adjuster button  
Note:  
When the projector has a suspended or rear installation is used, the orientation of the projection will need to be changed.  
Please see “Vertical Flip” on Page E-53.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
This section describes the use of direct operation with the main unit or remote control buttons.  
For information about operation using the menu, see Menu Operation Methodon Page E-40 and the various items on  
Pages E-47 to E-60.  
Input Selection  
This operation selects the input signal to be projected.  
STANDBY  
Main unit operation: Press the SOURCE button.  
(It will not function while the menu or the quick menu is displayed.)  
AUTO  
When Auto Source is On  
Whenever the SOURCE button is pressed, the projector automatically selects  
SOURCE  
another source that has the next input signal.  
When Auto Source is Off  
The input selection condition used last time will be set.  
Each press of the button moves the selection one step in the sequence of RGB →  
VIDEO S-VIDEO. Note that the various input signals will become the signal  
type set with [Input Format] SeeInput Formaton page E-56.  
Remote control operation: Press the desired input selection button.  
RGB button ........ Switches the RGB input.  
VIDEO button..... The input switches between VIDEO and S-VIDEO each time the button is  
STANDBY  
LASER  
AUTO  
pressed.  
RGB  
VIDEO  
When Auto Source is On  
When an input signal is not present at the selected source, the projector automati-  
MENU  
QUICK  
Q
cally selects the next source that has an input signal.  
R-CLICK/  
CANCEL  
ENTER  
When Auto Source is Off  
The projector switches to the selected source regardless of whether an input sig-  
FREEZE MUTE  
TIMER  
nal is present.  
1
2
VOL  
ZOOM  
Note:  
3
4
* When you do not operate source selection, the projector will assume the input selec-  
tion condition that was previously used.  
* See “Auto Source” on Page E-54 for information about the Auto Source on and off  
conditions.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Automatic Adjustment  
This function automatically adjusts the position shift, screen size, vertical stripes,  
and color infidelity of the projected analog RGB input signal.  
Normally automatic adjustment is performed at the time of signal selection.  
STANDBY  
AUTO  
Main unit operation/Remote control operation: Press the AUTO button.  
(This will not function while the menu or the quick menu is displayed.)  
A press of the AUTO button starts the automatic adjustment.  
SOURCE  
Note:  
* If the display position is shifted, vertical lines appear on the picture, or the projection  
is not good even after using automatic adjustment, please perform image adjustment  
manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page E-47.  
* When the image extends beyond the boundaries of the screen or is smaller than the  
screen, set Aspect to “Auto”. See “Aspect” on Page E-52.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
3
4
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Freezing a Moving Picture  
This function is used to stop and view a moving picture. Note that the input  
image continues to advance even though the picture there is a still picture  
condition.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
A press of the FREEZE button changes the screen to a still picture. A  
further press returns the screen to a moving picture.  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE  
TIMER  
MUTE  
1
2
VOL  
ZOOM  
3
4
Cancelling Video and Audio Temporarily  
This function is used to cancel the video and audio at the same time.  
STANDBY  
LASER  
A press of the MUTE button will blank the picture and the sound, and  
the screen will take on the background color that has been set.  
Another press will cause a return to the original conditions.  
RGB  
VIDEO  
AUTO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
3
4
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Adjustment of the Volume  
This function adjusts the volume of the built-in speaker.  
(1) Press the ̆ or ̄ VOL button to adjust the volume.  
The volume adjustment display appears when one of the buttons is  
pressed.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
The ̆ button increases the volume and the ̄ button decreases the  
volume.  
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
(2)  
(2) Press the CANCEL button to immediately close the display.  
The display will close when there has not been an operation in about  
10 seconds.  
1
2
VOL  
ZOOM  
3
4
Note:  
* Adjustment of the volume will not produce any sound unless an image is  
being projected.  
* Please make connections to the AUDIO connectors of the projector with the  
supplied audio cable.  
(1)  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Enlargement of the Image and Video Movement  
This function digitally enlarges the personal computer image and video  
image.  
(1) Press the ZOOM button to enlarge the image.  
The zoom display appears when the ZOOM button is pressed.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
Each press of the ̆ button enlarges the image and each press of the  
̄ button makes the image smaller (returning it to 1:1).  
(2)  
(3)  
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
(1)  
3
4
Zoom  
0
Zoom  
21  
(No enlargement)  
(Approximately 2 times enlargement)  
(2) Pressing the SELECT ̆̄̇̈ buttons on the remote control at  
the time of the zoom operation will cause the display position to  
move.  
(There will not be any movement when zoom is at 0.)  
Zoom  
21  
Zoom  
21  
(Approximately 2 times enlargement)  
(Movement)  
(3) Press the CANCEL button to immediately close the display.  
The display will close when there has not been an operation in about  
10 seconds.  
Note:  
After magnifying the image, be sure to use the ZOOM button to bring the gauge  
value back to “0”.  
The image can also be moved in the following circumstances.  
When Aspectis set to Realby the signal of the personal computer, and the input resolution is higher than the display  
resolution of the projector.  
When Aspectis set to Zoomby the video signal.  
Note:  
* Zoom and image movement functions are cancelled when the input is switched.  
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected  
so that they are not conspicuous.  
* Movement of the screen will not be possible when the menu screen is being displayed.  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Using the Presentation Timer  
The presentation is given while checking the timer displayed on the  
screen.  
The gauge display allows the remaining time to be known at a glance.  
(1) Press the TIMER button to show the settings display.  
The display will close when an operation has not been made for about  
10 seconds.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
(2)  
(3)  
[Timer settings display]  
CANCEL button  
(1)  
R-CLICK/  
CANCEL  
ENTER  
Press the CANCEL button to close the display immediately.  
FREEZE MUTE  
TIMER  
(2) Use the ̇ and ̈ SELECT buttons to set the time.  
The setting contents are Offand from 10 to 60 minutes (in 10-minute  
intervals)  
1
VOL  
2
ZOOM  
3
4
Settings can also be made with the SELECT ̇̈ buttons.  
(3) Press the ENTER button and start the timer.  
The display of the timer setting will close, the display of the timer  
will appear and simultaneously the timer will start.  
Gauge (Blue)  
[Timer Display]  
The blue gauge indicates the remaining time. When the gauge  
disappears,the time is up.  
The gauge continues to be displayed when the timer is stopped.  
When the remaining time is 0”  
(Gray)  
Press the ENTER button to restart the timer. The timer will start  
with the same time setting.  
Press the CANCEL button to close the timer display.The timer set-  
ting will return to Off.  
Moving the Position of the Timer Display  
The SELECT ̆̄̇̈ buttons on the remote control permit movement  
within the movable range of the timer display.  
Movable Range of the Timer Display  
Note:  
* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will  
still be operating at such times. Also, the timer will not be displayed unless a signal is being input.  
* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Using the Laser Pointer  
The remote control units laser pointer can be used to point to the section currently being explained, making presenta-  
tions more effective.  
CAUTION  
Do not look at the laser pointers light source.  
Be sure to heed the following. Pointing the laser beam at  
the eyes could lead to reduced vision or vision impairment.  
Never look at the laser pointers light source.  
Do not point the laser beam at people.  
Do not let children use the laser pointer.  
This label is located on the side of the remote control.  
Operation  
The red laser beam is emitted from the tip of the remote control  
unit while the LASER button is pressed in. Point the remote con-  
trol units transmitter in the direction you want to indicate.  
The laser beam turns off when you release your finger from the  
LASER button.  
S
T
A
N
D
B
Y
L
A
S
E
R
T
O
Q
U
IC  
K
E
Q
N
T
E
R
F
R
E
E
Z
E
ICK/  
CANCEL  
M
U
T
E
T
IM  
E
1
2
V
R
O
L
3
4
Z
O
O
M
LASER  
Note:  
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume  
transferring signals, press the button again.  
Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button.  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Performing Mouse Operations on the Computer  
with the Remote Control Unit  
When a computer and the projector are connected, mouse operations can be performed on the computer using the  
projectors remote control unit. When projecting images from the computer, the projector can be operated and mouse  
operations on the computer performed with the same remote control unit, making for efficient presentations.  
Connecting the computer and projector  
Use the USB cable included with the projector to connect the computers USB (type A) connector to the projectors MOUSE  
connector.  
Note:  
* Be sure to plug the cable in securely.  
* Depending on the type of connection, the computer’s operating system, etc., it may be necessary to change settings or restart the com-  
puter after making the connections.  
USB connector  
USB cable (mini B to A type) (Supplied item)  
Functions of the mouse function buttons  
When operating, point the remote control units transmitter towards the remote control sensor on the projector.  
L-CLICK button (on back)  
Press this to perform the left-click operation.  
STANDBY  
LASER  
AUTO  
VIDEO  
RGB  
JOG buttons  
These move the computers pointer in the corresponding direction.  
MENU  
QUICK  
Q
R-CLICK button  
Press this to perform the right-click operation.  
R-CLICK/  
CANCEL  
ENTER  
INFORMATION  
FREEZE MUTE  
TIMER  
The R-CLICK/CANCEL button is used for both the projector and mouse func-  
tion. When the R-CLICK/CANCEL button is pressed while a menu is open, the  
menu is closed.  
1
VOL  
2
ZOOM  
3
4
Note:  
Connections with USB Cables  
* For PC/AT compatible computers, this function cannot be used with operating systems other than Windows 98SE, Me, 2000 and XP. For  
Macintosh computers, this function cannot be used with operating systems other than OS 9 and later.  
* When the cable is disconnected and then reconnected to the USB port of the personal computer or the MOUSE connector of the projector,  
allow at least 5 seconds before reconnecting. Do not repeatedly disconnect and reconnect the cable in a momentary fashion. The personal  
computer may not be able to correctly identify the projector as a result.  
* The supplied USB cable is a dedicated cable for this projector. There is no guaranty that it will work in connections with other USB  
equipment.  
* This function may not work with some computers.  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Controlling the Projector from a Computer  
Use the control connector if the projector cannot be operated with the remote control unit, for example when it is  
suspended from the ceiling.  
Connecting the computer and projector  
Use a commercially available serial cable (D-Sub 9-pin, straight) to connect the computers RS-232C connector to the projectors  
control connector (PC CONTROL).  
RS-232C  
connector  
Serial cable (D-Sub 9-pin, straight) (commercially available)  
Note:  
* This function may not work with some computers.  
* Specialized knowledge is required to use the control connector. Consult a specialist, such as the person suspending the projector from the  
ceiling.  
Use as a High-Brightness Monochrome Projector  
Applicable Projector: U5-432  
Data comprising a lot of black-and-white content such as documents and spreadsheets can be projected as a  
highbrightness black-and-white image.While being projected, the image can be switched between black-and-white and  
color.  
Switching between color and black-and-white is done using the menus. For instructions on operating the menus, see Menu  
Operation Methodon E-40.  
Select Color B/W Switchingin the Setupmenu, then  
press one of the ̇ or ̈ SELECT buttons on the remote  
control unit to select B/W.  
When selected, the image switches to a high brightness black-  
and-white image.  
Select Colorto switch back to a color image.  
Press the CANCEL button on the remote control unit to close  
the menu display.  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Protecting the Projector with the Security Lock  
A password can be registered and the security lock set in order to protect the projector from unauthorized use.  
Registering the password  
The password is registered using the menus. For instructions on operating the menus, see Menu Operationson E-40.  
(1) Select Security Lockin the Optionmenu and set it to Enable.  
The menu closes and the password registration display appears.  
(2) Use the number buttons (1 to 4) to register the password.  
Be sure to input a 4-digit number.  
Example: Registering the password 2441”  
(1) Press number button 2. An “ ” (asterisk) appears at the first place.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
*
Next press number buttons 4, 4and 1in that order.Asterisks appear  
in all four places.  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
(2) Input the password again. An “ ” appears when the input number  
3
4
*
matches. If there is a mistake, the asterisks turn off. Start over from step  
(1) above.  
If the password matches, the password registration display closes.  
Note:  
To cancel the number you have input, press the CANCEL button.  
The asterisks disappear and the display returns to the input standby mode at the first  
place.  
To cancel the password registration mode, press the CANCEL button again. The “Pass-  
word” display turns off.  
This completes password registration.  
The Passwordinput display appears the next time the power is turned  
on.  
Note:  
The numbers you have input are not displayed. Be sure to write down the password  
and store it in a safe place.  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
If the password input display appears when the power is turned on  
When a password has been registered, the Passwordinput window appears on the projected image when the power is turned  
on.The projector continues projecting this image until the correct password is input.At this time, only the STANDBY button (power  
off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see  
E-37.  
Input the password using the number buttons (1 to 4).  
Be sure to input the registered 4-digit number.  
Example: To input the password 2441”  
Press number button 2. An “ ” (asterisk) appears at the first place.  
*
[Password input window]  
Next press number buttons 4, 4and 1in that order. Asterisks appear in all  
four places.  
If the password matches, the window turns off and the projector can be used  
normally.  
Canceling the password/Changing the password  
The password is canceled and changed using the menus. For instructions on operating the menus, see Menu Operationson E-  
40.  
Canceling the password  
Select Security Lockin the Optionmenu and set it to Disable.  
This clears the password and disables the security lock.  
The password input display no longer appears when the power is turned on.  
Changing the password  
After setting Security Lockto Disableas described above, set it back to En-  
able. The menu closes and the password registration display appears.  
Register the new password. See Registering the passwordon E-37.  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Operation  
Using the Quick Menu  
This function permits frequently used adjustments to be performed  
quickly.  
Note that the Quick Menu will not be displayed unless the signal of the con-  
STANDBY  
LASER  
AUTO  
nected equipment is input. Please select the input that you wish to adjust.  
RGB  
VIDEO  
MENU  
QUICK  
Q
(1)  
(2)  
(1) A press of the QUICK MENU button brings up the quick adjustment  
display.  
Further presses cause the adjustment display to change in sequence.  
The adjustment display can be selected with use of either the SELECT ̆ or  
̄ button.  
R-CLICK/  
CANCEL  
ENTER  
(3)  
FREEZE MUTE  
TIMER  
(2) Press the cursor ̇ or ̈ button to make the adjustment.  
1
2
VOL  
ZOOM  
(3) To close the display immediately, press the CANCEL button.  
In the absence of operations for a period of about 10 seconds, the display  
will close automatically.  
3
4
Content of Adjustments and Settings  
Example: Brightness adjustment display  
Display Item  
Adjustment/Setting  
Brightness  
Contrast  
Adjusts the brightness of the image. See page E-47.  
Adjusts the contrast of the image. See page E-47.  
Keystone  
Corrects (vertical) keystone distortion of the screen. See page E-53.  
This function adjusts the volume of the built-in speaker. See page E-31.  
Sets the time of the presentation timer. See page E-33.  
Select the preset color mode. See page E-49  
Volume  
Presentation timer  
Quick Color Adj.  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
This section describes only the menu operation method. Please see this item should you need information while  
performing menu operations.  
For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-  
tions.  
Adjustments and settings are made by projecting an image and adjusting to an optimum condition.  
The remote control should be pointed toward the remote control sensor of the projector and operated.  
To return the various items that have been changed via the menu to their standard values (i.e., default values at time  
of shipping from the factory), see Factory Defaulton Page E-59. (Some items will not return to their initial values.)  
The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting  
items that can be used with the input signal are displayed on the menu.  
Names and functions of remote control unit buttons used for menu operations  
MENU button  
Used for menu display and menu closure.  
STANDBY  
LASER  
AUTO  
VIDEO  
RGB  
MENU  
QUICK  
Q
SELECT ̆̄̇̈ buttons  
Used in the selection of menu names and item names as  
well as in setting and adjusting the item contents.  
R-CLICK/  
CANCEL  
ENTER  
CANCEL button  
Used to return to menu name selection as well as to close  
TIMER  
FREEZE MUTE  
the menu (and the sub menu display).  
1
2
VOL  
ZOOM  
ENTER button  
3
4
Used to set the verification display.  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
Menu Screen Names and Functions  
Menu Name  
This is the title of the menu.  
There is a change to the title screen  
when the menu is selected.  
The cursor moves to the selected menu  
name.  
Cursor (Deep Blue)  
This permits setting/adjustment of the  
item located at the cursor position.  
Applicable Projector: U5-432  
Not selectable for other models.  
Item Name  
This is the name of the ad-  
justment or setting.  
Icon: Pressing the ENTER but-  
ton displays the sub menu or set-  
ting contents.  
Adjustment Bar and Settings Contents  
Adjustment Bar: The increases and decreases in bar length ex-  
press the adjustment condition.  
Setting Contents: Displays the contents that have been set.  
Sub menu  
Adjustment Bar  
Item Name  
Settings Contents  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
Performing Menu Operations  
Only Setup, Optionsand Info.can be selected when no signal is being input.  
The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.  
The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected  
from the power outlet.  
(Note that some items are not stored.)  
Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input  
the signal to the projector.  
Select the input that you wish to adjust.  
The menu display of the description diagram depicts an example in which the Keystoneitem name is selected.  
Menu Display  
Press the MENU button to display the menu  
1
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
The menu name that existed when the menu was closed previously will be displayed.  
Selection of the Menu Name  
Press the SELECT ̇̈ button to select the menu name  
2
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Each press of the SELECT ̈ button advances the selection one step in the sequence of ColorViewSetup→  
OptionInfo.Image. Each press of the SELECT ̇ button causes a return of one step.  
The cursor moves to the selected menu name.  
Note:  
Please check that the cursor of the item name has disappeared at the time of menu name selection.  
Press the CANCEL button to make the cursor disappear.  
E-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
Displaying the Cursor  
3
Press the ̄ SELECT button to display the item name selection cursor.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
This condition al-  
lows selection of the  
item name.  
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Selection of the Item Name  
Press the SELECT ̆̄ button to align the cursor with the item name  
4
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Items for which the Icon Is Displayed  
Press the ENTER button to display the submenu.  
Press the SELECT ̆̄ button and align the cursor with the desired item name.  
There are also some items for which the setting display or the verification display will appear. Please see the various item  
descriptions.  
R-CLICK/  
CANCEL  
ENTER  
Sub menu  
FREEZE MUTE  
TIMER  
1
2
VOL  
ZOOM  
3
4
Making Adjustments/Settings  
Press the SELECT ̇̈ button and make the adjustment (or setting) while viewing the image  
5
When a button is pressed, the image will also change.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Adjustment display: Each press of the button results in a change of 1 point and continued presses  
cause changes to proceed in order.  
Setting display: The setting contents display changes with each press of the button.  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
Closing the Menu  
6
Press the MENU button and close the menu display  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Selecting Another Menu Name with Remote Control Operation  
When a sub menu is displayed, press the CANCEL but-  
ton and close the sub menu.  
Press the CANCEL button again to turn off the item name  
cursor.  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Press the SELECT ̇̈ button and select the menu name.  
(Menu names cannot be selected when the item name  
cursor is displayed.)  
STANDBY  
LASER  
AUTO  
RGB  
VIDEO  
MENU  
QUICK  
Q
R-CLICK/  
CANCEL  
ENTER  
FREEZE MUTE  
TIMER  
Note:  
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while  
the quick menu is displayed will close the quick menu and display the menu.  
E-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
List of Item Names Offering Input Selection and Adjustments/Settings  
The item names that can be adjusted/set will differ depending on the input signal.  
[Example of Menu Display Items at theTime of Input Signal RGB Selection]  
Sub Menu  
Item Name  
Menu name  
Image  
Item Name  
Reference  
Page  
Brightness  
Contrast  
E-47  
E-47  
E-47  
E-47  
E-47  
E-47  
E-48  
E-48  
E-48  
E-48  
E-49  
E-49  
E-50  
E-50  
E-50  
E-51  
E-52  
E-52  
E-53  
E-53  
E-53  
E-53  
Color  
Tint  
Sharpness  
Picture Adj.  
Fine Picture  
H Position  
V Position  
Reset  
Color  
View  
Quick Color Adj.  
Gamma  
Color Temp.  
White  
Color Space  
White Balance  
Aspect  
Filter  
Vertical Flip  
Horizontal Flip  
Keystone  
Keystone Save  
Tintcan be adjusted only at the time of NTSC composite/S signal input.  
E-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation Method  
Sub Menu  
Item Name  
Applicable Projector: U5-432  
Input Signal  
Menu name  
Setup  
Item Name  
Reference  
Compo  
R
n
G
entVIDEOS-VIDEO  
B
Page  
Color B/W Switching  
Auto Source  
E-54  
E-54  
E-54  
E-55  
E-55  
Auto Power Off  
Memu Position  
Lamp Mode  
Input Format  
RGB  
E-56  
E-56  
E-56  
E-56  
E-57  
E-57  
E-57  
E-58  
E-58  
E-59  
E-59  
E-59  
E-60  
E-60  
E-60  
Video  
S-Video  
Presentation Timer  
Language  
Option  
Info.  
On Screen  
Background  
Startup Screen  
Security Lock  
Status  
Factory Default  
Lamp Timer Reset  
Resolution  
Frequency  
Lamp Timer  
E-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image  
Perform this operation while projecting the picture for which the adjustment/setting will be made.  
Select the menu name Image.  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal.See List of Item Names Offering Input Selection and Adjustments/Settingson Page E-45.  
Brightness / Contrast / Color / Tint / Sharpness  
Picture qualities such as brightness and contrast will change depend-  
ing on the whether the room is bright or dark. Please adjust to suit your  
preference.  
Select the desired item name and then adjust with the SELECT ̇̈ buttons.  
SELECT Button  
Brighter  
More contrast  
Denser color  
More green  
SELECT Button  
Item Name  
Brightness  
Contrast  
Color  
Darker  
Less contrast  
Less dense color  
More red  
Tint  
Sharper image  
Sharpness  
Softer image  
Note:  
* The adjustment values of the adjustable items are stored according to input source.  
* “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or  
component signals.  
Picture Adj. / Fine Picture / H Position / V Position  
Usually, automatic adjustment is performed at the time of signal selec-  
tion, but when automatic adjustment is not effective, these adjustments  
can be performed.  
Note:  
When the image extends beyond the boundaries of the screen or is smaller than the  
screen, check that the “View” “Aspect” setting is set to “Auto”. See “Aspect” on  
Page E-52.  
Picture Adj. (Picture Adjustment)  
Adjust this when bright and dark vertical bands appear on the screen.  
Select the Picture Adj.item name and adjust with the SELECT ̇̈ buttons  
so that the vertical bands disappear and brightness becomes uniform across  
the screen.  
E-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image  
Fine Picture  
Adjust this when the picture shows a lack of color fidelity or flickering.  
Select the Fine Pictureitem name and adjust with the SELECT ̇̈ buttons  
so that the lack of color fidelity or the flickering disappears.  
H Position  
Adjust this when the picture is shifted to the left or right.  
Select the H Positionitem name and adjust with the SELECT ̇̈ buttons.  
V Position  
Adjust this when the picture is shifted up or down.  
Select the V Positionitem name and adjust with the SELECT ̇̈ buttons.  
Reset  
This function resets (i.e., returns to the standard settings) the adjust-  
ment/setting value of the Imagemenu name.  
A press of the ENTER button forces the reset.  
Note:  
* The item name “Fine Picture” at the time of RGB input will not be reset.  
* “Reset” of the menu name “Image” can be reset for each input source.  
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default”  
on Page E-59.  
E-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color  
Do the following operation while displaying the image you want to adjust or set.  
Select the menu name Color.  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settingson Pages E-  
45.  
Quick Color Adj.  
Select the preset color mode.  
Select the Quick Color Adj.item name and select the setting contents with  
the SELECT ̇̈ buttons.  
Color........... Select this to prioritize color.  
Standard ..... Select this to prioritize brightness.  
* When “Color” or “Standard” is selected, the “Gamma”, “Color Temp.” and “White” adjustment  
items are displayed in gray and cannot be selected or adjusted.  
Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can be selected  
and adjusted  
* The selected values for the different adjustment items are stored in the memory so the desired  
color adjustments can be set.  
Gamma  
Gamma corrects the proportion of change of the dark portions from the  
bright portions of the input signal.  
Set this to reproduce natural color tone or to distinctly project a per-  
sonal computer picture in a bright conference room.  
Select the Gammaitem name and select the setting contents with the SE-  
LECT ̇̈ buttons.  
Normal ....... Correction with standard settings  
Natural ........ Corrects for natural color tones  
Real ............ Corrects with emphasis on brightness  
Note:  
When “Color” or “Standard” is selected for “Quick Color Adj.”, the “Gamma” adjust-  
ment item is displayed in gray and cannot be selected or adjusted.  
E-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color  
Color Temp.  
The screen color is affected by the color of the illumination and other  
extraneous light.  
This function adjusts the white, which is the reference color for video  
equipment, and improves the quality of color reproduction. Adjustment  
can also be used to enhance skin colors.  
Select the item name Color Temp.and select the setting contents with the  
SELECT ̇̈ buttons.  
Low ............ Produces warm whites (reddish)  
Medium ...... Produces warm whites (yellowish)  
Normal ....... Produces the white of sunlight  
High ............ Produces cool whites (bluish)  
Note:  
When “Color” or “Standard” is selected for “Quick Color Adj.”, the “Color Temp.”  
adjustment item is displayed in gray and cannot be selected or adjusted. See “Quick  
Color Adj.” on E-49.  
White  
When projecting, this function is used to emphasize the whites of text or  
diagrams on the personal computer.  
Select the item name Whiteand use the SELECT ̇̈ buttons to select the  
setting contents.  
Select the desired degree of white from among Low, Medium, and High.  
Note:  
When “Color” or “Standard” is selected for “Quick Color Adj.”, the “White” adjust-  
ment item is displayed in gray and cannot be selected or adjusted. See “Quick Color  
Adj.” on E-49.  
Color Space  
Set this function when a component signal (YPbPr) is projected and the  
image is extremely red or extremely green.  
Select the item name Color Spaceand use the SELECT ̇̈ buttons to  
select a color space setting that provides a normal image.  
Selection contents at the time ofYPbPr input  
BT.709, SMPTE240  
Note:  
* When the component signal undergoes conversion processing to red, green,  
and blue which express the image of the projector, the correct color cannot be  
reproduced unless a system compliant with the color difference conversion sys-  
tem of the input signal is used. Color Space serves to make this selection.  
* The color space can only be adjusted with high definition TVs.  
E-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color  
White Balance  
This function automatically adjusts the black level and the white level of  
the analog RGB input signal to suit the personal computer.  
1
Select the item name [White Balance] and press the ENTER button.  
The display will change to [Input Black Signal].  
2
The screen background color of the connected personal computer  
will be set to black.  
3. Press the ENTER button.The display will change to [Adjusting Black]  
and the black level will be adjusted.  
4
5
6
The adjustment of the black level is completed and the display  
changes to [Input White Signal].  
The screen background color of the connected personal computer  
will be set to white.  
Press the ENTER button.The display will change to [AdjustingWhite]  
and the white level will be adjusted.  
[White balance complete] is displayed for a while and the adjustment is  
completed.  
E-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View  
Perform this operation while projecting the picture for which the adjustment/setting will be made.  
Select the menu name View.  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal.See List of Item Names Offering Input Selection and Adjustments/Settingson Page E-45.  
Aspect  
This function sets the horizontal and vertical picture proportions of the  
input signal.  
Select the item name Aspectand select the setting contents with the SE-  
LECT ̇̈ buttons.  
Personal Computer Signal  
Input Signal  
Auto  
Direct  
Real  
Auto ............ Automatically enlarges or reduces the image to project  
a full screen in a ratio of 4:3  
Direct .......... Maintains the aspect ratio and projects a picture of the  
maximum displayable size  
The setting is higher  
than the display reso-  
lution of the projector.  
The setting is lower  
than the display reso-  
lution of the projector.  
Real ............ Projects the input signal without pixel conversion  
Video Signals  
Aspect ratio selection  
4:3 screen  
Auto  
Wide  
Zoom  
Auto ............ While maintaining the aspect ratio, projects a full screen  
so that no portions extend beyond the boundaries of the  
screen. The top and bottom of the 16:9 image becomes  
black.  
Wide ........... Projects to fill the full width with the entire image at 16:9.  
(This feature is used to project a squeezed image in a  
proper aspect ratio.)  
16:9 screen  
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the  
screen. (Portion that extend off screen is cut.)  
See Selection of Aspect Ratioon Page E-29 for diagrams of projection screen  
images that correspond to the input signals.  
Note:  
Please note that using this monitor for the purpose of commercial gain or the at-  
traction of public attention in a venue such as a coffee shop or hotel and projecting  
a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image  
raises concern about the infringement of the copyright holder’s rights which are  
protected by copyright law.  
Note:  
When selection has been made for the “Real” setting of the personal computer  
signal (i.e., when the input signal and the projector display resolution are high) and  
the “Zoom” setting of the video signal, pressing the SELECT ̆̄̇̈ buttons on  
the remote control will permit movement of the display position. Note that there will  
not be any movement when the menu or the quick menu is displayed.  
Filter  
This function sets the sharpness when the input signal is adjusted to  
the resolution of the projector and enlarged or reduced.  
Select the item name Filterand select the setting contents with the SELECT  
̇̈ buttons.  
Smaller numerical values result in a sharper picture and larger values result in  
a softer picture. Please select your desired setting value.  
E-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View  
Vertical Flip / Horizontal Flip  
In selecting the method of projecting to the screen, these functions are  
set when the projector is in a suspended or a rear screen installation.  
Select the item name Vertical Flipor Horizontal Flipand select the setting  
contents with the SELECT ̇̈ buttons.  
Vertical FlipOff  
Vertical FlipOff  
Vertical FlipOn  
Vertical FlipOn  
Horizontal FlipOff  
Horizontal FlipOn  
Horizontal FlipOn  
Horizontal FlipOff  
Keystone  
Keystone distortion will occur when the projector and screen are on an  
angle (in the vertical orientation). This function is used to correct this  
distortion.  
Select the item name Keystoneand correct the keystone distortion using the  
SELECT ̇ ̈ buttons.  
Press the ̇button.  
Press the ̈button.  
Note:  
* The menus and other on-screen displays cannot be adjusted.  
* Please note that depending on the projected picture and the projection condi-  
tions, it may not be possible to eliminate keystone distortion completely.  
Keystone Save  
This function is used to save the keystone adjustment values.  
Setting Keystone Save to on will set the previous keystone adjustment values  
when projecting after the power cable has been disconnected and then recon-  
nected.  
Select the item name Keystone Saveand set with the SELECT ̇̈ buttons.  
Off .............. The keystone adjustment values return to the initial values when the power  
cable is unplugged.  
On............... The keystone adjustment values are retained in storage even when the  
power cable has been unplugged.  
Note:  
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is  
from the standby condition, the picture is projected using the previous keystone  
adjustment values.  
E-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Select menu name Setup.  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal.See List of Item Names Offering Input Selection and Adjustments/Settingson Page E-45.  
Applicable Projector: U5-432  
Color B/W Switching  
Documents, spreadsheets or other mostly black and white data can be  
projected with stronger brightness.  
It is possible to switch between the black/white and color mode while an  
image is being projected.  
Select the Color B/W Switchingitem name, then use the ̇ and ̈ SELECT  
buttons to select the desired setting.  
Color........... The color image projection mode is set.  
B/W ............ The high brightness black/white image projection mode is set.  
Auto Source  
The Auto Source function automatically detects the input signal when  
the power supply is switched on and when the input is switched.  
Select the item name Auto Sourceand select the setting contents with the  
SELECT ̇̈ buttons.  
On............... Switches on the automatic detection function  
Off .............. Switches off the automatic detection function  
Signal Detection Order When On  
The sequence of RGB VIDEO S-VIDEO is searched repeatedly.  
When a signal is detected, the search is stopped and the image is projected.  
Auto Power Off  
This function switches off the projector power automatically when the  
input of the projector enters a no-signal condition.  
Select item name Auto Power Offand select the setting contents with the  
SELECT ̇̈ buttons.  
On............... The power is switched off when there is no signal.  
Off .............. The power is not switch off even when there is no signal.  
Operation when Function is On  
The No Signal Power Offdisplay appears when a no-signal condition con-  
tinues for approximately 10 seconds. The power is switched off about 5  
minutes after this.  
If a signal is input during the appearance of the display and an operation  
button other than the STANDBY button is pressed, the display is closed and  
the function is cancelled.  
Note:  
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being  
input to the projector and Auto Power Off is not activated.  
E-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Menu Position  
This function sets the display position of the menu.  
Select item name Menu Positionand select the setting contents with the  
SELECT ̇̈ buttons.  
............. Displays on the left side  
............. Displays on the right side  
Lamp Mode  
Use this if the picture is projected on a small screen and the picture is  
too bright or when projecting images in dark rooms.  
Select the item name Lamp Modeand select the setting contents with the  
SELECT ̇̈ buttons.  
Eco ............. The lamp brightness is set to 80% and the lamp life is extended.  
(STATUS indicator is green)  
Normal ....... The lamp brightness is set to 100% and the screen is bright.  
(STATUS indicator is off)  
STATUS Indicator  
Note:  
STATUS  
Frequent switching this mode can degrade the lamp.  
STANDBY  
E-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Input Format  
This function is used in setting the input signals of the input connec-  
tors.  
Normally, this should be set to Auto.When identification is not possible  
with Auto, make the setting.  
Select the item name Input Format, press the ENTER button, and the sub  
menu will open.  
Select the connector that is to be changed, and select the setting contents  
with the SELECT ̇̈ buttons.  
[RGB]  
This is the signal setting for the RGB connector.  
Auto ............ Automatically identifies the signal.  
RGB ............ Analog RGB signal is set.  
Component . Component signal is set.  
[Video] and [S-Video]  
[Video] is the color system setting for the VIDEO connector and [S-Video] is  
the color system setting for the S-VIDEO connector.  
Auto ............ Automatic identification.  
NTSC .......... Fixed to the NTSC system.  
NTSC 4.43 .. Fixed to the NTSC 4.43 system.  
PAL ............. Fixed to the PAL system.  
PAL M ......... Fixed to the PAL M system.  
PAL N ......... Fixed to the PAL N system.  
PAL 60 ........ Fixed to the PAL 60 system.  
SECAM ....... Fixed to the SECAM system.  
Presentation Timer  
The presentation is given while checking the timer displayed on the  
screen.  
The gauge display allows the remaining time to be known at a glance.  
Select the item name Presentation Timerand select the setting contents  
with the SELECT ̇̈ buttons.  
Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.  
To start the timer...  
Press the MENU button and open the menu.  
The timer display will appear at the lower right and the timer will start.  
See Using the Presentation Timeron Page E-33 for details.  
E-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option  
Select menu name Option.  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal.See List of Item Names Offering Input Selection and Adjustments/Settingson Page E-45.  
Language  
This function sets the language that is displayed on screen in  
the messages and menu displays.  
Select item name Languageand press the ENTER button to open  
the Language sub menu.  
Select the language with the SELECT ̆̄ buttons.  
On Screen  
This function switches on/off the messages displayed with a black  
frame such as the input signal information and the aspect ratio.  
Select item name On Screenand select the setting contents with the  
SELECT ̇̈ buttons.  
On............... The message is displayed.  
Off .............. The message is not displayed.  
Note:  
Even when set to off, messages that are not in a black frame will be dis-  
Wide  
played.  
Example of a display when the  
ASPECT button is pressed  
Background  
This function sets the screen color when the input source is no-  
signal.  
Select item name Backgroundand select the setting contents with  
the SELECT ̇̈ buttons.  
Blue ............ Sets a blue screen when there is no signal  
Black........... Sets a black screen when there is no signal  
E-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option  
Startup Screen  
This is the selection of whether or not to display the logo screen  
at startup time.  
Select item name On Screenand select the setting contents with the  
SELECT ̇̈ buttons.  
Logo ........... Displays the logo.  
Blank .......... Does not display the logo.  
Note:  
When “Logo” is selected at the startup screen, the “PLUS” logo is dis-  
played.  
Security Lock  
A password can be registered and the security lock set in order  
to prevent unauthorized use of the projector.  
For instructions on using the security function, see Protecting the  
Projector with the Security Lockon E-37.  
Select item name Security Lockand select the setting contents with  
the SELECT ̇̈ buttons.  
Disable ....... The security lock is disabled.  
The projector can be operated without inputting the password.  
Enable......... The security lock is enabled.  
The security lock is activated when the power is turned on, and  
the password must be input in order to operate the projector.  
E-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Info.  
Select menu name Info..  
See Menu Operation Methodon Page E-40 for information about performing menu operations. The item name display will  
differ depending on the input signal.See List of Item Names Offering Input Selection and Adjustments/Settingson Page E-45.  
Status  
This displays information about the equipment.  
Select item name Statusand press the ENTER button.  
There is a change to the status display.  
Press the CANCEL button to return to the menu.  
Display Contents:  
Projector model, firmware version, and the internet home page ad-  
dress of PLUS Vision Corp.  
Factory Default  
This function returns the adjustments and settings of all the in-  
put sources to the standard factory default values.  
Select item name Factory Defaultand press the ENTER button.  
There is a change to the display [Press ENTERto Factory Default  
Set].  
Press the ENTER button to initialize.  
To cancel, press the CANCEL button and there will be a return to the  
menu.  
Items that are not set to the factory default:  
Vertical Flip / Horizontal Flip, Color B/W Switching, Language, Secu-  
rity Lock and Lamp Timer.  
Lamp Timer Reset  
This function resets the lamp timer. Be sure to perform the reset  
operation when the lamp cartridge has been replaced.  
Select item name Lamp Timer Resetand press the ENTER button.  
There is a change to the display Press ENTERto Lamp Timer Re-  
set.  
Press the ENTER button to initialize.  
To cancel, press the CANCEL button and there will be a return to the  
menu.  
E-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Info.  
Resolution / Frequency  
This function displays the resolution and frequency of the detected in-  
put signal.  
Lamp Timer  
This displays the lamp timer.  
This projector has an Eco mode function. The lamp life will differ between  
Normal mode and Eco mode.  
Lamp Life  
Use only in Normal mode: approx.2000 hours  
Use only in Eco mode: approx.3000 hours  
* Lamp life will differ when there has been switching between the modes.  
When Lamp Life Has Been Reached  
Replace the Lamp Cartridgeis displayed on the screen for 10 seconds in  
a 1-minute interval.  
Please replace the lamp with a new one.  
See Replacing the Lamp Cartridgeon Page E-64 for information about  
lamp cartridge replacement.  
When Over 100 Hours Have Elapsed Since Reaching Lamp Life  
(Including Eco Mode)  
[Warning!! System Shutdown] is displayed for 10 seconds and the power is  
switched off. Pressing the STANDBY button under this condition will not  
switch on the power. Please replace the lamp cartridge.  
E-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When an Indicator is Lit or Flashing  
The indicators on the projectors control panel light or flash to  
STATUS indicator  
notify of problems, as described below.  
STATUS  
An indicator is also used to notify you of the currently set power  
mode (under normal circumstances). See Power Cable Con-  
nections and Switching the Power On/Offon page E-23.  
STANDBY indicator  
ANDBY  
ST  
ANDBY  
ST  
AUTO  
Indicator status  
Lit red  
What you should do  
STATUS  
STANDBY  
STATUS  
STANDBY  
It is time to replace the lamp.  
Replace with a new lamp cartridge.  
When the power is on (Lit green)  
Standby (Lit amber)  
The lamp has reached the end of its service life. The power  
will no longer turn on.  
The projector can be used for 100 hours after the lamp has reached  
the end of its service life.  
Replace with a new lamp cartridge.  
Lit red  
Flashing amber for 60 seconds, then lit  
amber  
The lamp cover is open.  
STATUS  
Flashing red  
The lamp cover is not properly mounted. Mount it properly.  
(lit for 1 seconds/off for 1 seconds)  
STANDBY  
Lit red  
The temperature is abnormally high.  
The temperature protector has been activated. If the room tem-  
perature is high, move the projector to a cool place. If the  
projectors internal temperature is high, check the cooling fans  
ventilation slots and clean them if they are clogged.  
When the temperature protector is activated, the power turns  
off and in some cases will not turn back on immediately. In this  
case wait about 90 seconds, then try again.  
STATUS  
Flashing red  
(lit for 0.5 seconds/off for 0.5 seconds)  
STANDBY  
Lit red  
The fan has stopped.  
Flashing red  
STATUS  
Unplug the power cable and contact a store that sells the U5-432/  
(lit for 0.5 seconds/off for 0.5 seconds)  
U5-332 for repairs.  
STANDBY  
Lit amber  
Flashing red  
The lamp will not light.  
STATUS  
(lit for 1 seconds/off for 1 seconds)  
Wait at least 90 seconds, then turn the power back on.If the  
problem persists, unplug the power cord and contact a store  
that sells the U5-432/U5-332 for repairs.  
When the lamp has burned out during use  
Flashing amber for 90 seconds, then lit amber  
STANDBY  
When the lamp does not come on from the start  
Lit amber  
Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power  
cable and contact your store of purchase.  
Thermal Protector  
When the temperature inside the projector becomes abnormally high, the STATUS indicator flashes red (0.5 seconds on/0.5  
seconds off), the STANDBY indicator is a steady red, and at the same time the temperature protector operates and switches off  
the power of the projector.  
Should this happen, please take the following actions.  
1. Switch off the power and disconnect the power plug from the wall outlet.  
2. Check the following matters and take the required measures.  
When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the  
outflow and intake holes and clean them if they are obstructed.  
3. Wait about 60 minutes until the temperature of the projector drops.  
If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.  
E-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following matters before requesting servicing.  
Reference  
Page  
Problem  
Check  
Is the power cord plugged into a power outlet?  
Power does not turn on  
E-23  
E-66  
E-61  
Is the lamp cover properly mounted?  
Is the projectors temperature high? To protect the projector, the power can-  
not be turned on when the projectors temperature is abnormally high.  
Has the lamp reached the end of its service life?  
E-61  
Is a connected input selected?  
No image is produced  
E-28  
E-1821  
E-60  
Is the cable properly connected to the input terminal?  
When a computer is connected, are signals being output from the computer?  
Does the signal being input have a frequency usable with this projector?  
Are the brightness and contrast adjusted to the minimum?  
Is the STATUS indicator lit a steady red or flashing red?  
When the component signal of the DVD player is connected with the RGB  
connector and the image is not output, is [Input Settings] of the RGB con-  
nector properly selected?  
E-68  
E-47  
E-61  
E-56  
For a RGB input, has the picture been properly adjusted?  
E-47, 48  
Is the projector properly installed?  
Image is distorted  
E-26  
E-31, 53  
For trapezoidal (keystone) distortion, perform keystone adjustment.  
Please note that depending on the projected picture and the projection con-  
ditions, it may not be possible to eliminate keystone distortion completely.  
Is the lens properly focused?  
Image is out of focus  
E-27  
E-1517  
E-1517  
Are the screen and projector installed at the proper distance?  
Does the projection distance exceed the focusing range?  
Is there condensation on the lens, etc.?  
If the projector is moved from a cool storage area to a warm place and the  
power is turned on, condensation may form on the lens or internal optical  
parts. If this happens, wait until the condensation has evaporated before  
using the projector.  
For a computer input, are the horizontal and vertical positions properly ad-  
Image is not in proper posi-  
tion and is not displayed  
properly  
E-48  
E-68  
justed?  
Does the input signal have a compatible resolution and frequency? Check  
the computers resolution.  
If the image is crushed in the horizontal or vertical direction or if it is not  
displayed over the entire screen, select a different aspect ratio.  
Video image is crushed  
E-29  
When a component signal is being input, is the color space setting proper?  
For a composite input, is the hue properly adjusted?  
Colors of the overall image  
are strange  
E-50  
E-47  
From the menu, select Imageand adjust the clock frequency and phase.  
Characters flicker or colors  
are offset for RGB inputs  
E-47, 48  
Other than [Settings], [Option] and [Information], selection will not be pos-  
sible unless a signal is being input to the projector and the image/picture is  
projected.  
Cannot select the menu  
name  
Are the remote control units batteries worn? Replace with new batteries.  
Is there an obstacle between the remote control unit and the projectors  
remote control signal sensor?  
Remote control unit does  
not operate  
E-11, 12  
E-13  
Is the remote control unit outside of range?  
E-13  
E-13  
Are you pointing the remote control units transmitter towards the projectors  
remote control signal sensor?  
See When an indicator is lit or flashing.  
STATUS indicator is lit red  
or flashing red  
E-61  
E-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning  
Be certain to disconnect the power plug from the power outlet before cleaning.  
Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber  
or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the  
coatings may peel, etc.  
Cleaning a Soiled Projector Main Unit  
Wipe with a lint-free, soft, dry cloth.  
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a  
chemically-treated cloth is going to be used, please follow any written warnings.  
Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings  
may peel, etc.  
When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.  
Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.  
Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.  
Dirty Lens  
Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning  
paper for eye glasses. Be careful not to scratch the lens at this time.  
Dust of the Intake and Outflow Holes  
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which  
could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.  
Switch off the power, check that the STANDBY in-  
dicator has changed to a steadily lit amber, then  
unplug the power cable.  
Clean out the holes from the outside using a  
vacuum cleaner. Use the brush adapter of the  
S
U
AT  
T
S
Y
B
D
N
A
vacuum cleaner to do this. Avoid using the vacuum  
directly without attaching the adapter as well as the  
use of a nozzle adapter.  
T
S
Y
B
D
N
A
T
S
O
T
U
A
E
C
R
U
O
S
PC COROL  
MOUSE  
AUDIO  
VIDEO  
S
VIDEO  
RGB  
Cleaning the Inside of the Projector  
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected  
inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact  
your dealer.  
E-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Lamp Cartridge  
The lamp that is used as a light source in the projector has a limited service life.The rated service life of the lamp is  
about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and  
other factors.  
Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp  
means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from  
test conditions at this company.)  
When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp  
Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the  
replacement following the procedure below.  
If the projector is used another 100 hours after the lamps service life is reached, the power is set to the standby mode  
and no longer turns on.  
Contact a store that sells the U5-432/U5-332 for a replacement lamp. Indicate you need a U5-200 replacement lamp for  
the U5-432/U5-332 (order code 28-050).  
CAUTION  
• Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop,  
disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before  
replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will  
cause burns because of the high temperature.  
• Do not remove any screws other than those specified.  
• Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.  
• If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can  
be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may  
cause injury. If this happens, contact your dealer or the store the projector was purchased.  
E-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Lamp Cartridge  
Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to  
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.  
1 Unplug the power cord.  
2 Turn the projector upside-down.  
3 Remove the lamp cover.  
(1) Turn the lamp covers set screw counterclockwise and  
loosen until the screw turns freely. (The screw does  
not come off.)  
(2) Open the lamp cover a little, then pull it in the direc-  
tion of the arrow and remove it.  
4 Remove the lamp cartridge.  
(1) Turn the lamp cartridges screw counterclockwise and  
loosen them until the screw turn freely. (The screw  
do not come off.)  
(2) Grasp the lamp cartridges handle and pull upward  
to remove the lamp cartridge.  
E-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Lamp Cartridge  
5 Mount the new lamp cartridge.  
(1) Push the lamp cartridge in slowly.  
(2) Turn the lamp cartridge screw clockwise to tighten  
them.  
(Line it up with the screw holes in the projector.)  
6 Mount the lamp cover.  
(1) Set the tip of the lamp cover in place, then close the  
lamp cover.  
(2) Turn the lamp covers screw clockwise to tighten it.  
7 Reset the Lamp Timer.  
Connect the power cable, switch on the power, and then reset.  
Select [Info.] [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization  
verification display. Press the ENTER button again. See Lamp Timer Reseton Page E-59.  
Note:  
After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should  
this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for  
more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.  
Contact a store that sells the U5-432/U5-332 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-432/U5-332  
(order code 28-050).  
E-66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model  
U5-432/U5-332  
Optical  
Method of projection :  
DLP(single chip DMD)  
DMD  
0.7 inches 1024
ן
768 dots  
Lamp  
200 W high pressure mercury lamp  
Projection lens :  
Image size  
Manual zoom (
ן
1.2), Manual focus F = 2.4 2.6, f = 26.5 31.8 mm (f = 1.04 1.25 inch)  
Minimum: 27 inch (at projection distance of 1.2 m (3.9 feet) telephoto)  
Maximum: 300 inch (at projection distance of 11.5 m (37.7 feet) wide)  
Light Output  
U5-432:  
Standard mode: 2000 ANSI lumens  
B/W mode: 3000 ANSI lumens  
U5-332:  
Standard mode: 2000 ANSI lumens  
2000:1 (Full on/off)  
Contrast Ratio  
Electrical  
Inputs  
Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/  
YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching)  
RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)  
Full color (16,770,000 colors)  
VGA (640
ן
480) expansion/true, S-VGA (800
ן
600) expansion/true  
XGA (1024
ן
768) true, S-XGA (1280
ן
1024) compression  
2.8/1.4 A  
Color Reproduction  
Resolution  
Input Current  
Power Requirement  
Power Consumption  
100 120/220 240 V AC, 50/60 Hz  
280 watts (250 watts in eco mode)  
Mechanical  
Dimensions Excluding Stand 216 mm (W)
ן
60 mm (H)
ן
260 mm (D) (not including protrusion)  
8.5 in.(W)
ן
2.4 in.(H)
ן
10.2 in.(D) (not including protrusion)  
Weight  
Approximately 2.1 kg / 4.6 lbs  
Operational Temperatures  
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity  
Specifications and design are subject to change without notice.  
E-67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Supported Frequency  
The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table  
below.  
Manual adjustments may be required for some input signals. See Picture Adj. / Fine Picture / H Position / V Positionon page E-  
47, 48.  
RGB  
Frequency  
Signal  
Resolution  
Video  
Horizonral (kHz)  
Vertical (Hz)  
XGA  
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
מ
15.734  
15.625  
31.5  
37.9  
31.5  
31.5  
37.9  
31.5  
37.9  
31.5  
37.9  
37.5  
43.3  
35.2  
37.9  
46.9  
48.1  
53.7  
48.4  
56.5  
57.7  
60.0  
68.7  
64.0  
35.0  
49.7  
60.2  
68.7  
33.8  
28.1  
45.0  
31.3  
31.5  
60.0  
50.0  
70.1  
85.1  
70.0  
70.1  
85.1  
70.0  
85.0  
60.0  
72.8  
75.0  
85.0  
56.3  
60.3  
75.0  
72.2  
85.1  
60.0  
70.1  
72.0  
75.0  
85.0  
60.0  
66.7  
74.5  
74.9  
75.1  
60.0  
50.0  
60.0  
50.0  
60.0  
VIDEO(NTSC)  
VIDEO(PAL/SECAM)  
VESA  
640 
ן
 350  
640 
ן
 350  
720 
ן
 350  
640 
ן
 400  
640 
ן
 400  
720 
ן
 400  
720 
ן
 400  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
1024 
ן
 763  
1024 
ן
 763  
1024 
ן
 763  
1024 
ן
 763  
1024 
ן
 763  
1280 
ן
 1024  
640 
ן
 480  
823 
ן
 624  
1024 
ן
 768  
1152 
ן
 870  
1920 
ן
 1080  
1920 
ן
 1080  
1280 
ן
 720  
720 
ן
 576  
720 
ן
 480  
Apple Macintosh  
HDTV (1080i)  
(720p)  
SDTV (576p)  
(480p)  
* The projector does not support the ADC connector  
on Apple Macintosh.  
מ
: Supported frequency  
: Not supported frequency  
U5-432/U5-332  
The display resolution is 1024
ן
768 dots.When displaying a signal with resolutions other than 1024
ן
768  
dots such as 1280
ן
1024, sizes of characters or lines may be uneven.  
E-68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cabinet Dimensions  
S O U R C E  
A U T O  
A N S D T B Y  
A N S D T B Y  
S T A T U S  
216 (8.5)  
Unit: mm (inch)  
E-69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2004  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Breast Pump ISIS iQ UNO User Manual
Philips Digital Photo Frame SPY3010 User Manual
Philips Network Card SWR1310 User Manual
Philips Power Supply 6F22 User Manual
Philips TV Cables SWA2540W User Manual
Philips TV Cables SWX1237 User Manual
Philips TV DVD Combo 20DV6942 37 User Manual
Polk Audio Speaker CSW155 User Manual
Poulan Chainsaw 2003 06 User Manual
Poulan Lawn Mower 186888 User Manual