PLUS Vision Projector U3 1100SF User Manual

DATA PROJECTOR

U3-1100/U3-810

USER’S MANUAL

English

Applicable Models: U3-1100WZ, U3-1100W, U3-1100SF

U3-810WZ, U3-810W, U3-810SF

C O L O R

E N

PLUS

IMPORTANT

Digital Light Processing, DLP, Digital Micromirror Device and DMD are all trademarks of

Texas Instruments.

Windows 98, Windows 95, and Windows 3.1 are registered trademarks in the United States

and other countries of Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corporation.

Macintosh and MAC are trademarks of Apple Computer Inc.

Other names of companies and products mentioned are trademarks and registered trade-

marks of the respective companies.

^TM, ® and © marks are not used in this document.

PLUS Industrial Corporation is certified to ISO 9001.

Certificate No. Q1001219118017.

Otowa Head Office and PLUSLAND of PLUS Corporation

and PLUS Industrial Corporation are certified to ISO 14001.

Certificate No. NQE-9809008A.

* PLUS Vision Corp. is certified to ISO 14001 as a member of the

PLUS group.

Download from Www.Somanuals.com. All Manuals Search And Download.

T a b l e o f c o n t e n t s

Cleaning

IMPORTANT SAFETY INFORMATION ................................... 2

Table of contents ........................................................................ 3A

• Disconnect the power cable (mains lead) from the unit.

• Clean the cabinet of the unit periodically with a damp cloth. If

heavily soiled, use a mild detergent. Never use strong detergents

or solvents such as alcohol or thinner.

Basic information and preparations........ 4

• Use a blower or lens paper to clean the lens, and be careful not to

scratch or mar the lens.

Features ......................................................................................... 4

Checking the supplied accessories ............................................... 4

Preparing the remote control ........................................................ 5

Parts and controls .......................................................................... 6

Installation ..................................................................................... 9

• Clean the ventilation slots and speaker grills on the unit

periodically using a vacuum cleaner. If accumulated dust blocks

the ventilation slots, the unit will overheat, which may cause the

unit to malfunction.

Use a soft brush attachment when using the vacuum cleaner. Do

not use a hard attachment, such as a crevice tool, to prevent the

damage to the unit.

Connections ............................................ 10

Connecting video equipment ...................................................... 10

Lamp Replacement

Connecting Video Equipment With Component Video Signal

(YCbCr) Output .......................................................................... 11

• Be sure to replace the lamp when the Status indicator comes on.

If you continue to use the lamp after 1000 hours of usage, the

lamp will turn off.

Connecting a PC or Macintosh ................................................... 12

Fire and Shock Precautions

• Ensure that there is sufficient ventilation and that vents are

unobstructed to prevent the buildup of heat inside the unit. Allow

at least 10 cm (3 inches) of space between the unit and walls.

Operation................................................. 14

Using the unit .............................................................................. 14

Using the Remote Control (Input Selection).............................. 16

Using the Remote Control as the PC Mouse .............................. 17

Various functions while using the unit ....................................... 18

Use as a High-Brightness Monochrome Projector.................. 19B

• Prevent foreign objects such as paper clips and bits of paper from

falling into the unit. Do not attempt to retrieve any objects that

fell into the unit. Do not insert any metal objects such as a wire or

screwdriver into the unit. If something should fall into the unit,

immediately disconnect the power cable from the unit and have

the object removed by a qualified PLUS service person.

• Do not place any liquids on top of the unit.

• Do not look into the lens while the unit is on. Serious damage

to your eyes could result.

Menu operation....................................... 20

Menu Structure............................................................................ 20

Adjusting the picture elements ................................................... 22

Adjusting the projected image from the computer .................... 23

Manual Adjustment of Personal Computer Images ................... 24

Resetting ...................................................................................... 25

Resetting the Lamp Hours of Usage........................................... 25

Setting Narrow Images (Advanced Menu) ................................. 26

Setting in Accordance With Image Contents.............................. 27

Initial Settings ............................................................................. 28

Setting the Menu ......................................................................... 30

Carrying around

When carrying the unit around, please use the carrying case that

comes with it and, to protect the lens from scratches, always shut

the sliding lens cap. Also, do not subject the unit to strong

mechanical shock.

Others ....................................................... 31

Troubleshooting .......................................................................... 31

When the STATUS indicator lights or flashes ........................... 32

Replacing the lamp cartridge ...................................................... 33

Specifications .............................................................................. 34

E – 3A

Download from Www.Somanuals.com. All Manuals Search And Download.

This User's Manual covers the following models: U3-1100WZ, U3-1100W, U3-1100SF,

U3-810WZ, U3-810W, and U3-810SF.

Depending on the projector that you purchased, the resolution may differ from another projector and some models

may not have an optical zoom function nor a high-brightness monochrome function. This manual provides a descrip-

tion of the U3-1100WZ (with a full complement of functions).

Please check the table below regarding the resolution and availability of functions for your projector.

Model

Resolution (Full screen display)

1024

768 (XGA)

Optical Zoom Function

High-Brightness Monochrome Function

U3-1100WZ

U3-1100W

U3-1100SF

U3-810WZ

U3-810W

U3-810SF

ࠗ

1024

768 (XGA)

ࠗ

1024

768 (XGA)

800

600 (S-VGA)

800

600 (S-VGA)

800

600 (S-VGA)

ࠗ

ࠗ: With function

: Without function

E – 3B

Download from Www.Somanuals.com. All Manuals Search And Download.

B a s i c i n f o r m a t i o n a n d p r e p a r a t i o n s

C h e c k i n g t h e

s u p p l i e d a c c e s s o r i e s

F e a t u r e s

Congratulations On Your Purchase Of The U3-

1100WZ, U3-1100W, U3-1100SF, U3-810WZ, U3-

810W, U3-810SF Data Projector

The U3-1100WZ, U3-1100W, U3-1100SF, U3-810WZ, U3-810W, U3-

810SF is one of the most spectacular data projectors available today. The

unit enables you to project precise images up to 200 inches across (mea-

sured diagonally) from your PC or Macintosh computer (desktop or note-

book), VCR, document camera, laser disc player, DVD player, etc.

Make sure your box contains everything listed below. If any

pieces are missing, contact your dealer.

Please save the original box and packing materials in case

you ever need to ship the unit.

The number of accessories is indicated in brackets.

For remote control

The unit can be placed on a tabletop or cart. The unit can also be used to

project images from behind the screen.*

Remote control [1]

Batteries (size AAA) [2]

* Consult your dealer for more information.

The other main features you’ll enjoy

•

Compatible with following various color systems:

– NTSC (U.S. and Canada standard)

– PAL (Western Europe standard)

– SECAM (France and Eastern Europe standard)

– NTSC4.43 (Middle East standard)

•

(U3-1100WZ, U3-1100W, U3-1100SF)

Superior brightness of 1000 ANSI lumens (In color mode) /2200

ANSI lumens (In B/W mode), small size, and weighing only about 1.5

kilograms/3.3 lbs.

Power cable (mains lead)

(1.8 m/5.9 ft.) [1]

The shape of the plug varies

depending on the region where

the unit is purchased.

(U3-810WZ, U3-810W, U3-810SF)

Superior brightness of 1000 ANSI lumens: In color mode/2200 ANSI

lumens: In monochrome mode, small size, and weighing only about

1.5 kilograms/3.3 lbs.

Using TI’s Digital Mirror Device (DMD) and our own optical design we

have developed a geometric effect that increases the light usage effi-

ciency. By increasing the light usage efficiency we can better reproduce

the three basic colors (RGB) required for color reproduction on a single

DMD. This means superior brightness, smaller size, and lighter weight.

For computer connection

•

Sharp, clear images

RGB cable

Audio cable

(1 m/3.3 ft.) [1]

No. 770710000

There is no RGB color separation, and the spaces between the individual

pixels are not noticeable. That means sharp and clear reproduction of

small characters and figures. Take a closer look and notice the difference

in quality!

(1 m/3.3 ft.) [1]

No. 770708000

Outstanding sharp, clear, 3D like images with vivid colors when

reproducing DVD video and other high picture-quality data/video

sources

Accurate gray scale reproduction makes for more natural image displays.

DVD and other high quality image sources bring out the true image

display quality of the unit.

•

Screen not distorted to a trapezoid (keystoning) when projecting to

the height of the line of vision

Because the projection position is already set to the height of the line of

vision, there is no keystoning effect.

Audio adaptor

(mini-jack pin conversion,

0.15 m/0.5 ft) [1]

No. 770704000

Even when projecting above or under the height of the line of vision,

image distortion (if any) can be adjusted using the keystone correction

function.

(U3-1100WZ, U3-1100W, U3-1100SF)

Fully compatible with true XGA; support for SXGA using advanced

intelligent compression technology

For video equipment connection

The advanced intelligent compression technology enables these projectors

to present clear compression SXGA images without any line omission.

Video cable

(1 m/3.3 ft.) [1]

No. 770703000

(U3-810WZ, U3-810W, U3-810SF)

Fully compatible with true S-VGA; support for XGA using ad-

vanced intelligent compression technology

The advanced intelligent compression technology enables it to present clear

compression XGA images without any line omission.

•

A remote control that can operate the PC or Macintosh

The supplied remote control both operates the unit and acts as a wireless

mouse control to operate the PC or Macintosh connected to the unit.

The compact and easy to carry cabinet with its contemporary design

complements any office, board room, or auditorium.

The Industry's First B/W Mode that Can Be Switched to Double

Brightness

S-video cable

(1 m/3.3 ft.) [1]

No. 770709000

•

When projecting data that is largely black and white such as documents

and spreadsheets, setting the top panel switch to B/W Mode will allow

double the brightness as compared to the color setting. Never before has

this function been incorporated in a projector, making the most of the

features of the high contrast ratio DLP system projector.

E – 4

Download from Www.Somanuals.com. All Manuals Search And Download.

P r e p a r i n g t h e

r e m o t e c o n t r o l

Inserting the batteries

When using the remote control as computer

mouse

1 Press firmly and slide

the battery cover off.

USB mouse cable (1 m/3.3 ft.) [1]

[for IBM / Macintosh]

No. 770707000

2 Insert the two supplied

batteries (size AAA).

Ensure that the

PS/2 mouse cable (1 m/3.3 ft.) [1]

[for IBM PS/2]

No. 770706000

polarities (+ and –) of

the batteries are aligned

correctly.

3 Slide the cover

back until it

snaps into

place.

Soft pouch [1]

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Carrying case [1]

Dispose of used batteries according to the manufacturer’s instructions.

Notes

• If the remote control gets wet, wipe it dry immediately.

• Avoid excessive heat and humidity.

• If you will not be using the remote control for a long time, remove the

batteries.

• Do not mix new and old or different types of batteries.

• There are operations that can only be carried out by remote control.

Handle the remote control carefully.

How to use the carrying case

Remote control effective range

Packing the unit

Packing the accessories

The remote sensors are located on the front and back of the unit.

The controllable range is 50 degrees horizontally and 30 degrees

vertically relative to a line that is at a right angle to the remote

sensor. And the distance between the point of the remote control

and remote sensor must be shorter than four meters (13 feet).

USER’S MANUAL

(Simplified Edition) [1]

USER’S MANUAL

(CD-ROM Edition) [1]

30˚

50˚

30˚

E – 5

Download from Www.Somanuals.com. All Manuals Search And Download.

P a r t s a n d c o n t r o l s

For operational instructions, refer to the page indicated in brackets.

Top, front and side panel view

Control panel

STATUS indicator [32]

POWER indicator [14,16]

POWER

STATUS

POWER

SOURCE

AUTO

POWER button [14,16]

AUTO button [18]

SOURCE button [14, 16]

“COLOR” “B/W” switch*¹[19B]

Speaker [10, 18]

Adjuster button [15]

Zoom ring*²[15]

Focus ring [15]

P O W E R

S O U R C E

T A

A U T O

C O L O R

O P E N

Remote Sensor [5]

Lens [3, 9]

PLUS

Sliding lens cap [3, 14]

Ventilation slots [3]

Exhaust vents [3]

*¹Applicable models: U3-1100WZ, U3-1100W, U3-810WZ,

and U3-810W

*²U3-1100WZ and U3-810WZ

Bottom

Rear adjuster [15]

Lamp cover [33]

Ventilation slots [3]

Front adjuster [15]

Lamp cover screw [33]

Adjustment foot [15]

E – 6

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear and side panel view

Ventilation slots [3]

Remote sensor [5]

Built-in security slot [see below]

AC IN terminal [14]

VID

bCr

USE

Rear adjuster [15]

Ventilation slots [3]

Adjustment foot [15]

Terminal Panel

AUDIO jack [10, 11, 12] RGB/YCbCr connector [11, 12]

VIDEO jack [10]

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

MOUSE connector [17]

S-VIDEO jack [10]

This security slot supports the MicroSaver^®Security

System. MicroSaver^®is a registered trademark of

Kensington Microware Inc. The logo is trade-

marked and owned by Kensington Microware Inc.

Built-in Security Slot

E – 7

Download from Www.Somanuals.com. All Manuals Search And Download.

P a r t s a n d c o n t r o l s ( c o n t i n u e d )

Wireless Remote Control

ENTER button [17, 25]

Infrared transmitter [5]

LED

The red LED lights during

infrared sending.

Cursor key [17, 19A, 22]

POWER button [14, 16]

MOUSE

POWER

MOUSE

POWER

VIDEO

RGB

VIDEO

RGB

MOUSE button [17]

VIDEO button [16]

CANCEL

AUTO button [18]

FREEZE button [18]

MUTE button [18]

AUTO

FREEZE

MUTE

ZOOM KEYSTONE VOLUME

MENU button [20]

CANCEL button [17, 22]

RGB button [16]

VOLUME +/– button [18]

KEYSTONE +/– button [18]

ZOOM +/– button [19A]

PLUS

FLIP COVER [18, 20]

Note

The remote controller supplied with this unit is a Class 1 LED

product.

E – 8

Download from Www.Somanuals.com. All Manuals Search And Download.

I n s t a l l a t i o n

The distance from the unit lens to the screen determines to the size of the projected image, therefore, you need to consider the place where you set

up the unit and screen before making connections.You also need to consider the screen size and height of the unit and screen as other important factors.

Tip

A non-glossy wall may be used as a substitute for a screen.

WARNING

• Carrying the unit

Always carry the unit in the carrying case. Ensure that the power cable and any other cables connecting to video sources are disconnected

before moving the unit. When moving the unit or when it is not in use, cover the lens with the sliding lens cap.

• Only use the unit on a solid flat level surface. If the unit falls to the ground, you may be injured and the unit may severely be damaged.

• Do not use the unit where temperatures vary greatly. The unit must be used at temperatures between 5°C (41°F) and 35°C (95°F).

• Do not expose the unit to moisture, dust, or smoke. This will harm the screen image.

•

Ensure that you have adequate ventilation around the unit to allow heat dissipation. Do not cover the vents on the bottom or the side of the unit.

Installation Guidelines (normal installation)

This section explains how to determine the screen size you use. Use the following table and charts as a guide.

Optimum focal point from the lens surface is as follows:

3.9 feet - 22.3 feet / 1.2 m - 6.8 m (U3-810W, U3-810SF)

3.9 feet - 32.2 feet / 1.2 m - 9.8 m (U3-810WZ)

3.9 feet - 21.6 feet / 1.2 m - 6.6 m (U3-1100W, U3-1100SF)

3.9 feet - 30.8 feet / 1.2 m - 9.4 m (U3-1100WZ)

Distance and image size for U3-1100W, U3-1100SF, U3-810W and U3-810SF

Screen width

[Screen height]

4m (13.1 feet)

200"

Screen size (diagonal)

U3-1100 U3-810

Screen height

3m (9.8 feet)

2m (6.6 feet)

1m (3.3feet)

150"

[Screen size]

120"

100"

80"

60"

17.2˚

40"

U3-810 : 35"

U3-1100 : 36"

Center of lens

(3.3feet)

(6.6 feet)

(9.8 feet)

(16.4 feet)

(23.0 feet)

Lens surface

(13.1 feet)

(19.7 feet)

[Projection distance]

Distance from center of lens to lower edge of screen

U3-810W, U3-810SF

U3-1100W, U3-1100SF

U3-810W, U3-810SF

U3-1100W, U3-1100SF

Screen dimensions

width x height (cm)

Screen dimensions

width x height (inch)

Screen

size (inch)

Screen

size (inch)

Height H

(cm)

Height H

(inch)

Projection

distance (m)

Projection

distance (m)

Projection

Height H

(cm)

Height H

(inch)

distance (feet)

1.2

1.4

2.1

2.7

3.4

4.1

5.1

6.8

3.9

4.6

6.9

8.9

11.2

13.5

16.7

22.3

35”

36”

40”

60”

80”

100”

120”

150”

200”

35”

36”

40”

60”

80”

100”

120”

150”

200”

71.1 X

73.2 X

81.3 X

121.9 X

162.6 X

203.2 X

243.8 X

304.8 X

406.4 X

28.0 X

28.8 X

32.0 X

48.0 X

64.0 X

80.0 X

96.0 X

120.0 X

160.0 X

53.3

54.9

61.0

91.4

121.9

152.4

182.9

228.6

304.8

10.5

10.8

12.0

18.0

24.0

30.0

36.0

44.9

59.9

1.2

1.3

2.0

2.6

3.3

4.0

5.0

6.6

9.8

21.0

21.6

24.0

36.0

48.0

60.0

72.0

90.0

120.0

4.1

4.3

4.7

7.1

9.4

11.8

14.2

17.7

23.6

3.9

4.3

6.6

8.5

10.8

13.1

16.4

21.6

3.9

4.1

6.2

8.2

10.3

12.3

15.4

20.6

10.4

15.7

20.9

26.1

31.3

39.2

52.2

Notes

• The range of error is +/- 5% because the distances are calculated values.

• Move the unit to the position where the projected image is horizontally centered to the screen.

• Do not use the unit where temperatures vary greatly. The unit must be used at temperatures between 5˚C (41˚F) and 35˚C (95˚F).

• To raise the projection position, place the unit on the stable table.

• If strong light falls on the remote sensor, the remote control may not function. Do not place the unit in direct lightning.

• For best results, do not expose the screen to direct sunlight or strong light.

E – 9A

Download from Www.Somanuals.com. All Manuals Search And Download.

Distance and image size for U3- 810WZ and U3- 1100WZ

The drawings show the image sizes and distances for tele and wide.

[Screen height]

Tele (max)

4m (13.1 feet)

200"

Wide (max)

150"

[Screen size]

3m (9.8 feet)

2m (6.6 feet)

1m (3.3feet)

120"

100"

80"

60"

40"

25"

Center of lens

Distance from center of

lens to lower edge of

screen

(3.3feet)

(19.7 feet)

(29.5 feet)

Lens surface

(6.6 feet)

(9.8 feet)

(13.1 feet)

(16.4 feet)

(23.0 feet)

(26.2 feet)

[Projection distance]

Projection distance and screen height for U3-810WZ

[Screen height]

4m (13.1 feet)

Tele (max)

200"

Wide (max)

150"

3m (9.8 feet)

2m (6.6 feet)

1m (3.3feet)

[Screen size]

120"

100"

80"

60"

40"

26"

Center of lens

Distance from center of

lens to lower edge of

screen

(3.3feet)

(6.6 feet)

(9.8 feet)

(29.5 feet)

(13.1 feet)

(16.4 feet)

(19.7 feet)

(23.0 feet)

(26.2 feet)

Lens surface

[Projection distance]

Projection distance and screen height for U3-1100WZ

U3-810WZ

U3-1100WZ

Screen dimensions

width x height (cm)

Screen

size (inch)

Projection distance (m)

Wide - Tele

Height H

(cm)

Projection distance (m)

Wide - Tele

Height H

(cm)

25”

26”

40”

60”

80”

100”

120”

150”

200”

50.8

52.8

81.3

121.9

162.6

203.2

243.8

304.8

406.4

38.1

39.6

61.0

91.4

121.9

152.4

182.9

228.6

304.8

1.20

1.22

7.6

–

1.2

–

6.8

1.6 - 1.9

2.4 - 2.9

3.2 - 3.9

4.1 - 4.9

4.9 - 5.9

6.1 - 7.4

8.2 - 9.8

12.0

18.0

23.9

29.9

35.9

44.9

59.9

1.5 - 1.9

2.3 - 2.8

3.1 - 3.7

3.9 - 4.7

4.7 - 5.6

5.9 - 7.1

7.9 - 9.4

10.4

15.5

20.7

25.9

31.1

38.9

51.8

U3-810WZ

U3-1100WZ

Screen dimensions

width x height (inch)

Screen

size (inch)

Projection distance (feet)

Wide - Tele

Height H

(inch)

Projection distance (feet)

Wide - Tele

Height H

(inch)

25”

26”

40”

60”

80”

100”

120”

150”

200”

20.0

20.8

32.0

48.0

64.0

80.0

96.0

120.0

160.0

15.0

15.6

24.0

36.0

48.0

60.0

72.0

90.0

120.0

3.9

4.0

3.0

4.7

7.1

9.4

11.8

14.1

17.7

23.6

–

3.9

–

2.7

4.1

6.1

5.2 - 6.2

7.9 - 9.5

10.5 - 12.8

13.5 - 16.1

16.1 - 19.4

20.0 - 24.3

26.9 - 32.2

4.9 - 6.2

7.5 - 9.2

10.2 - 12.1

12.8 - 15.4

15.4 - 18.4

19.4 - 23.3

25.9 - 30.8

8.1

10.2

12.2

15.3

20.4

E – 9B

Download from Www.Somanuals.com. All Manuals Search And Download.

C o n n e c t i o n s

C o n n e c t i n g v i d e o e q u i p m e n t

You can connect up to two pieces of video equipment to the unit following the illustrations below.

• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.

(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)

• You can output the sound of only one component through the unit speaker even when two components are connected.

When connecting two external units, the audio from either one of these units can be output from the speaker of this device. Audio can be

turned on and off for video related input (video, S-video) from the menu or RGB (or YCbCr) input. (see page 28)

Connection to the VIDEO jack of the unit

VCR/DVD player/laser disc player, etc.

(L) (R)

White

Red

Yellow

To video out jack

Audio cable (accessory)

Audio adaptor (accessory)

To audio out jack

Video cable (accessory)

Rear panel jacks of this device

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

Connection to the S-VIDEO jack of the unit

VCR/DVD player/laser disc player, etc.

(R)

(L)

White Red

Yellow

To S-video out jack

To audio out jack

Audio cable (accessory)

Audio adaptor (accessory)

S-video cable (accessory)

Rear panel jacks of this device

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

E – 10

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Video Equipment With Component Video Signal (YCbCr) Output

• Video equipment with component video signal (YCbCr) output can be connected to this projector by setting the RGB/YCbCr connector to

YCbCr (see page 27) from the menu.

Connection to the RGB/YCbCr connector

DVD player

(Cb)

(L)

(R)

(Y)

(Cr)

White Red Green Blue Red

To audio out jack

To component video (YCbCr) OUT jack

Audio adaptor (accessory)

Component cable (option)

(Order code: 28-690)

Jacks: RCA × 3 mini D-Sub 15-pin

Audio cable (accessory)

Rear panel jacks of this device

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

Plug in the connection cable

and tighten the screws.

E – 11

Download from Www.Somanuals.com. All Manuals Search And Download.

C o n n e c t i n g a P C o r M a c i n t o s h

This projector can be used as a display for numerous applications by connecting the analog RGB output connector of a PC to the RGB/YCbCr

jack of this projector and setting the RGB/YCbCr connector to RGB (see page 27).

• Either read the instruction manual or contact the manufacturer concerning the method used to set your PC.

● IBM PC/AT compatible

● Macintosh mini D-sub 15-pin monitor output

connector.

Mini D-Sub 15-pin connector

To headphone jack

Audio cable (accessory)

RGB cable (accessory)

Rear panel jacks of this device

Plug in the connection cable

and tighten the screws.

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

E – 12

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the computer’s video

resolutions

Notebook computers and resolution

standards

Depending on your computer's graphics capability, you may be

able to select one of several resolutions. Generally a computer-

either a PC or Macintosh- with 1 MB VRAM will generally run:

(U3-1100WZ, U3-1100W, U3-1100SF)

The unit is designed to project industry standardized video such as

VESA (Video Electronics Standards Association) or XGA

(eXtended Graphics Array). Notebook computers do not use indus-

try standards. They use whatever timing is necessary to match their

local LCD display. The end result is typically not standard. By

turning off your notebook's display, the timing parameters are a bit

more like the real VESA or XGA signal.

640 × 480 at 16.7 million colors (24 bit true color)

800 × 600 at 65,000 colors.

1024 × 768 at 256 colors.

As the resolution increases, the number of colors you can run

decreases. With 2 MB VRAM a computer will generally run:

(U3-810WZ, U3-810W, U3-810SF)

640 × 480 at 16.7 million colors (24 bit true color).

800 × 600 at 16.7 million colors (24 bit true color).

1024 × 768 at 65,000 colors.

The unit is designed to project industry standardized video such as

VESA (Video Electronics Standards Association) or VGA (Video

Graphics Array). Notebook computers do not use industry stan-

dards. They use whatever timing is necessary to match their local

LCD display. The end result is typically not standard. By turning off

your notebook display, the timing parameters are a bit more like the

real VESA or VGA signal.

1280 × 1024 at 256 colors.

Windows 98/Windows 95

There are two methods you can use to change your resolution.

Method 1

1 Move your cursor to the background image and R-click.

Outputting Notebook Type Personal

Computer External Output Signals

2 In the “Properties” menu, select “Settings.”

3 Change your resolution and click “OK.”

When a notebook type personal computer is connected for use in

projecting, a certain amount of knowledge is necessary for cable

connection, startup and the succeeding operations. Please refer to

the instruction manual of your notebook type personal computer

when performing the following operations.

4 You may be asked to reboot for the changes to take effect,

or a message may appear saying that “Windows is about

to resize your display.” You’ll be asked if you want to

keep your settings. Select “Yes.”

1. Make sure that this device is receiving signals

from your notebook type personal computer.

Method 2

1 Click on your “My Computer” icon.

The external signal may not be output even though the LCD

screen of the notebook type personal computer indicates such

output. Check by using the INFORMATION menu displayed

by this device (page 20, 21).

2 Open “Control Panel” and select “Display.”

3 Change your resolution and click “OK.” after the new

resolution is selected.

4 You may be asked to reboot for the changes to take effect,

or a message may appear saying that “Windows is about

to resize your display.” You’ll be asked if you want to

keep your settings. Select “Yes.”

If 0kHz is displayed, there is no external output signal from the

personal computer.

2. If the notebook type personal computer is not

outputting the external signal, perform the fol-

lowing operation.

Windows 3.1

1 Click on the “Main” icon and open “Control Panel.”

For IBM PC/AT machines, press either the [Fn] key or one of

the [F1] - [F12] keys.

2 Select “Change System Settings” and click on “Option.”

3 Choose “Change Display Settings.”

Note

When displayed on the LCD screen of a notebook type personal

computer and this device at the same time, the projected video

may not be correct even the LCD screen display is normal. In

such case, turn off the notebook type personal computer display

and try using only the external output mode. (In some cases,

external output only can be set by performing step 2 above or by

closing the LCD panel.)

4 Select the resolution you want.

5 Choose the current or desired drive.

6 Restart Windows for the changes to take effect.

Macintosh

1 Under the Apple menu, select “Control Panels” and open

“Monitors.”

2 Click and open “Options.”

3 Select your new resolution and click “OK.”

E – 13

Download from Www.Somanuals.com. All Manuals Search And Download.

O p e r a t i o n

U s i n g t h e u n i t

Before Using

Open the sliding lens cap.

Turn on the connected source (computer,

VCR, DVD player, etc.).

If you use a video component, start playback for

screen/image adjustment.

Select the input by pressing either the

VIDEO or RGB button of the remote con-

trol, or the SOURCE button of this device

(refer to page 16).

Connect the power cable.

The POWER indicator will light amber, the ex-

haust fan will operate at slow speed and the

standby status will be activated.

MOUSE

POWER

SOURCE

VIDEO

RGB

CANCEL

Lights in amber

(Standby)

Notes

POWER

STATU

• If the blue or black screen (the background type differs

depending on the “BACKGROUND” setting. See page 28.)

is projected, check the following:

POWER

– Is the source properly connected to the unit?

– Is the source component or computer turned on?

– Are the video signals coming to the unit?

• The video resolution of the connected computer can be

changed. See page 13.

VIDEO

RGB

YCbCr

MOUSE

Adjust the position and height of the unit.

To wall

outlet

Move the unit to the position where the projected

image is horizontally centered to the screen.

Power cable

(supplied)

• When the projected image is offset

horizontally

Adjust the position of the unit so that the unit is

square to the screen.

View from the top

Screen

Press POWER on the remote control, or

POWER on top of the unit, to turn on the

unit.

The POWER indicator on top of the unit turns to

green and starts flashing.

It takes one minute for the unit to be ready for use.

Wait until the indicator stops flashing and lights

steadily in green.

MOUSE

POWER

• When the projected image is offset ver-

tically

VIDEO

RGB

CANCEL

Adjust the height balance of the unit with the

adjusters. See next page.

Side view

Green light flashes

(About one minute)

↓

Then lights steadily

in green

POWER

Screen

Note

While the POWER indicator is flashing, the unit doesn’t turn

off even if you press POWER on the remote control, or

POWER on the unit.

(Continued on next page.)

E – 14

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjuster Adjustment

The top and bottom of the projected image is

corrected, as shown below.

There are two adjusters: one on the right side of the back panel

and another in the front center of the main unit.

If a menu is being displayed, distortion of the

menu will not be corrected.

To raise the projection position:

1Use right hands to lift the front of the main unit to approxi-

mately the desired adjustment angle.

2Press the adjuster button on the front.

Loosen the adjuster legs and allow them to drop into position.

3Release the button.

The extended adjuster legs will be locked.

4Rotate the contact surfaces of the rear adjuster either clock-

wise or counterclockwise to accurately adjust the level.

[U3-1100W, U3-1100SF, U3-810W, U3-810SF]

Adjust the image size to match the distance to the screen.

Next, use the focus ring to adjust the focus.

Focus ring

Down

[U3- 1100WZ, U3- 810WZ]

Adjust the image size to match the distance to the screen.

Use the zoom ring to adjust the image size. Next, use the

focus ring to adjust the focus.

Down

To lower the projection position:

Zoom ring

Focus ring

Preparation: Lower the front adjuster.

1Raise the adjusting foot. If the image is too low, raise the

front adjuster to move up it.

2Rotate the contact surfaces of the rear adjuster either clock-

wise or counterclockwise to accurately adjust the level.

E N

Down

VIDEO

Change the unit setting to suit the

method and source selected in step 4.

• Select the “PROJECTION” appropriate

for the type of projector installation.

(See page 29)

RGB

YCbCr

MOUSE

AUDIO

If the image is projected reversed, vertically, or

horizontally, reset “PROJECTION”.

When distortion of the projected image

cannot be corrected with the adjusters,

press the KEYSTONE +/– buttons of the

remote control to fine adjust (see page

18).

• In the case of video or S-video, select

the color system as necessary. (See

page 26)

Normally, it is not necessary to change the

factory settings. Also, set the RGB/YCbCr con-

nector for component video (YCbCr). (See

page 27)

Using KEYSTONE to adjust projected image

distortion.

• In the case of RGB input, adjust the

video of the connected PC.

This projector automatically identifies the input

signal and selects the most appropriate resolution.

However, manually adjust the “PICTURE ADJ”

and “FINE PICTURE” (see page 24) when there

is flicker, noise, color offset, etc., and manually

adjust the vertical and horizontal position (see

page 24) when the image is not centered.

You can also choose to project the image at the

original size of the incoming signal resolution.

(see page 27). (Normally, the resolution is au-

tomatically sensed and the display is enlarged

ZOOM KEYSTONE VOLUME

Note

Maximum correction is 14 degrees (including optical correc-

tion).

or reduced.)

(Continued on the next page.)

E – 15

Download from Www.Somanuals.com. All Manuals Search And Download.

U s i n g t h e u n i t

( c o n t i n u e d )

U s i n g t h e R e m o t e C o n t r o l

( I n p u t S e l e c t i o n )

Adjust the picture elements (see page

22), then select the picture type

according to the video content (see page

26).

MOUSE

POWER

VIDEO

RGB

10 Start using the unit.

CANCEL

VIDEO button

RGB button

The following functions are available while using

the unit:

Operating from the main unit

Inputs can be selected not only by operating the remote

control but also by using the main unit SOURCE button.

• Adjusting the volume of the unit's speaker

(see pages 18 and 28),

• Turning off the image and muting the sound

temporarily (see page 18),

POWER

STATUS

POWER

SOURCE

AUTO

• Freezing a moving picture (see page 18),

• Enlarging the picture (see page 19A)

SOURCE button

Note

Press the VIDEO button.

• When there is no signal input for a period of 5 min. or more,

the power is automatically turned off and standby status is

activated. (see page 29)

The video signal (VIDEO, S-VIDEO) connected

to the input jack of this device will be detected

and projected automatically. If a video signal is

not detected, the message NO SIGNAL will be

displayed.

After using the unit

VIDEO

Press the POWER button of the remote

control or the POWER button of the main

unit for a few seconds.

The power will turn off and the POWER indicator

will blink amber for 1 min., then the standby

status will be activated. (The exhaust fan will

continue to run for a while for cooling purposes.)

Do not unplug the power cord while the indi-

cator is blinking.

Press the RGB button.

The analog RGB signal connected to the input

connector of this device will be detected and

projected automatically.

(Component video will be detected if the RGB/

YCbCr connector is set (page 27) to YCbCr.) If a

video signal is not detected, the message NO

SIGNAL will be displayed.

MOUSE

POWER

RGB

POWER

VIDEO

RGB

CANCEL

Note

Blinks amber

(1 min.)

• All video signals input to this device will be detected if Auto

Source (page 29) is set.

↓

Lights amber

Note

Press the SOURCE button.

• The POWER switches of the remote control and main unit

will not operate until the blinking stops.

The video signal (RGB or YCbCr, VIDEO, S-

VIDEO) connected to the input jack of this device

will automatically be detected and projected. If a

video signal is not detected, the message NO

• After the standby status is activated, wait 1 min. or more

before turning the power on again. The power will not turn

on until the 1 min. interval has elapsed.

SIGNAL will be displayed.

• The exhaust fan will continue to run even in standby status.

SOURCE

Disconnect the power cord.

The POWER indicator will turn off.

The signals are sensed repeatedly in the se-

quence shown below.

→ RGB/YCbCr

S-VIDEO ← VIDEO

Note

• When Auto Source (see page 29) is set to ON, all signals

input to this projector will be sensed.

E – 16

Download from Www.Somanuals.com. All Manuals Search And Download.

U s i n g t h e R e m o t e C o n t r o l a s t h e P C

M o u s e

The remote control of this projector can be used as the PC mouse (wireless mouse function) by connecting the MOUSE connector of this

projector and the PC.

Remote control mouse functions

• When the MOUSE button on the remote control is pressed, the button is lit in red.

This red light shows that the cursor key on the remote control operates the computer mouse

function.

When the MOUSE button is pressed again, the button's light goes off. In this condition the cursor

MOUSE

POWER

key operates the projector cursor function.

MOUSE button

VIDEO

RGB

• If a computer running Windows is connected, the ENTER button on the remote control operates

as the computer mouse left click button and the CANCEL button as the computer mouse right

click button.

CANCEL

• If a Macintosh computer is connected, the ENTER and CANCEL buttons operate in the same way as the computer mouse click button.

Connecting a PC and the MOUSE connector of this projector

Before connecting a PC

• Before connecting, turn off the PC power. Turn off the power of this projector if it is on.

• When connection is completed, turn on the power of this projector and then start the PC.

USB Port Connection

Connect the supplied USB mouse cable directly to the USB

port (universal serial bus) of the personal computer, as

shown in the diagram.

Personal computer

USB port

IBM PC/AT or

Macintosh

USB mouse cable (accessory)

MOUSE connector

AUDIO MOUSE

RGB

YCbCr

S-VIDEO VIDEO

IBM PS/2 compatible

To PS/2 MOUSE

port

PS/2 mouse cable (accessory)

IBM PS/2 Mouse Port Connection

Connect the supplied PS/2 mouse cable to the personal

computer, as shown in the diagram.

Note

• Depending on the personal computer, the mouse may not be recognized in some cases if not connected to the MOUSE connector before the personal

computer power is turned on.

• In the case of some notebook and laptop type personal computers, it may not be possible to use the standard pointing device (track ball, etc.) of the

personal computer when connected to the MOUSE connector. In such case, it will not be possible to use the pointing device until the personal

computer is rebooted, even if disconnected from the MOUSE connector.

E – 17

Download from Www.Somanuals.com. All Manuals Search And Download.

V a r i o u s f u n c t i o n s w h i l e u s i n g t h e u n i t

The following operations can be performed by opening the FLIP COVER of the remote control.

FREEZE button

AUTO

FREEZE

MUTE

AUTO button

MUTE button

ZOOM KEYSTONE VOLUME

VOLUME +/– button

ZOOM +/– button

KEYSTONE +/– button

Automatic Screen Adjustment

Adjusting the Volume

Adjusting the volume of the unit's speaker.

Press the AUTO button.

Press VOLUME + to increase the volume

or – to decrease.

AUTO

VOLUME

The position and size of the input image will be

adjusted automatically in accordance with the

resolution.

Note

Operation is the same as with the AUTO button of the main unit.

KEYSTONE Adjustment

Freezing animated images

When distortion of the projected image

cannot be compensated with the adjust-

ers, press the KEYSTONE +/– button to

adjust accurately.

You can capture the desired frame of a moving picture.

Press FREEZE button.

KEYSTONE

A still image of the current frame is displayed. To

restore the present picture, press the button

again.

FREEZE

Tip

The still picture can also be enlarged (see page 19A).

Turning off the image and muting the

sound temporarily

Using KEYSTONE button to adjust the top and

bottom of a projected image.

The top and bottom of the projected will be compensated, as

shown in the diagram. If the menu is displayed, distortion of

the menu itself will not be compensated.

Press MUTE button.

The image turns off and the sound is muted at the

same time. To restore the picture and sound,

press the button again.

Note

MUTE

When keystone adjustment is used, whether or not the aspect

ratio of the image is to be maintained can be set from the menu

(see page 28).

E – 18

Download from Www.Somanuals.com. All Manuals Search And Download.

To move to the desired portion of the

enlarged picture

Press the desired portion of the cursor

key.

Cursor key

MOUSE

POWER

VIDEO

RGB

ZOOM +/– button

The available directions are indicated by the four

large triangle marks on the cursor key. The pic-

ture will move in the direction of the mark you are

pressing.

CANCEL

The ZOOM +/- buttons are used

for the digital zoom function

which allows you to enlarge a

portion of the image.

To adjust the image size, enlarge

the image manually by using the

zoom ring. (available on U3-

810WZ and U3-1100WZ only)

AUTO

FREEZE

MUTE

ZOOM KEYSTONE VOLUME

Move upward

Enlarging the picture

Move leftward

Move rightward

You can enlarge the picture up to ten times the original

size.

Press ZOOM + button.

While the button is pressed the picture is en-

larged until it becomes ten times the original size.

Release the button at the desired size.

ZOOM

Move downward

Note

Less than the original size of the picture cannot be moved

because the whole image is fully displayed.

Ten times as large as

Original size

the original size

Note

The quality of the enlarged picture deteriorates compared to

the original size picture.

Screen Reduction

Press ZOOM – button.When this button is

released, the screen will return to 90%

reduction.

ZOOM

90% reduction

screen

Enlarged screen

Standard screen

E – 19A

Download from Www.Somanuals.com. All Manuals Search And Download.

U s e a s

H i g h - B r i g h t n e s s M o n o c h r o m e P r o j e c t o r

In monochrome mode, data that is largely black and white such as documents and spreadsheets can

be projected at double the brightness as compared to color projection.

Switching between monochrome and color images is possible even while projecting.

“COLOR”“B/W” switch

(Only on the U3-1100WZ, U3-1100W, U3-810WZ,

and U3-810W)

VIDEO

RGB / YCbCr

MOUSE

AUDIO

Slide the“COLOR”“B/W”switch to

either the COLOR side or the B/W

side.

COLOR Side

COLOR

B / W

Provides a color image.

B/W Side

Provides a high-brightness monochrome

image.

COLOR

B / W

E – 19B

E – 20

Download from Www.Somanuals.com. All Manuals Search And Download.

M e n u o p e r a t i o n

M e n u S t r u c t u r e

The numerals in parentheses (

) are reference page numbers.

The normal menu will be

displayed when the MENU

button is pressed with the

remote control FLIP COVER

closed.

Normal menu

For VIDEO, S-VIDEO and component video (YCbCr) input

(22)

MENU button

MOUSE

POWER

VIDEO

RGB

CANCEL

(25)

PLUS

Advanced menu

The advanced menu will be

displayed when the MENU

button is pressed with the

remote control FLIP COVER

open.

For VIDEO, S-VIDEO and component video (YCbCr) input

(26)

(27)

MENU button

MOUSE

POWER

VIDEO

RGB

CANCEL

AUTO

FREEZE

MUTE

ZOOM KEYSTONE VOLUME

(27)

(28)

Common menu

(28)

(29)

Common menu

(30)

E – 20

Download from Www.Somanuals.com. All Manuals Search And Download.

Normal menu

RGB input

(22)

(24)

(25)

Advanced menu

• The Advanced menu cannot be used unless the FLIP COVER of the supplied remote control is open.

RGB input

(26)

(27)

(26)

(27)

(28)

(29)

(30)

E – 21

Download from Www.Somanuals.com. All Manuals Search And Download.

A d j u s t i n g t h e p i c t u r e e l e m e n t s

The picture elements such as brightness, contrast, white

balance, and so on can be adjusted individually for each

input source. The adjustable items vary depending on the

input source.

(The elements marked with “ ” are adjustable.)

Input source

BRIGHTNESS

CONTRAST

COLOR

VIDEO/S-VIDEO

CONPONENT VIDEO

RGB

–

TINT

–

SHARPNESS

The elements marked with " " are adjustable.

The element marked with "

NTSC4.43 only.

" is adjustable for NTSC and

The elements marked with "-" are not adjustable.

Press the cursor ̆ / ̄ keys to select

Select the input source (see page 16)

“COLOR”.

Press the MENU button to display the

menu, hold down the cursor ̇ / ̈ keys or

the MENU button and then select “IM-

AGE”.

Press the cursor ̇ / ̈ keys to adjust the

color.

Press the cursor ̆ / ̄ keys to select

“TINT”.

Press the cursor ̆ / ̄ keys to select

“BRIGHTNESS”.

The items that appear in the menu will differ

depending on the input.

Note

This adjustment is not possible with color systems other than

NTSC and NTSC4.43.

10 Press the cursor ̇ / ̈ keys to adjust the

Press the cursor ̇ / ̈ keys to adjust the

tint.

brightness.

11 Press the cursor ̆ / ̄ keys to select

Press the cursor ̆ / ̄ keys to select

“CONTRAST”.

“SHARPNESS”.

Note

This adjustment is not possible with YCbCr signal.

Press the cursor ̇ / ̈ keys to adjust the

contrast.

Some elements are not adjustable for Video, S-

Video and Component (YCbCr) signal in the

procedures from Step 7.

12 Press the cursor ̇ / ̈ keys to adjust the

sharpness.

Elements that are not adjustable are not dis-

played.

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

E – 22

Download from Www.Somanuals.com. All Manuals Search And Download.

A d j u s t i n g t h e p r o j e c t e d i m a g e f r o m

t h e c o m p u t e r

The unit selects the most suitable resolutions as shown in the “Timing Chart” below according to the incoming signals from the RGB/YCbCr

connector. However, you may need manual adjustment depending on the computer. If you have any vertical banding, noise, dot interference,

or crosstalk on the projected picture, adjust the clock frequency with “PICTURE ADJ” then the clock phase with “FINE PICTURE” (see page

24). You can also adjust the horizontal and vertical position of the image (see page 24).

When adjusting manually, you can choose to project the image at the original size of the incoming signal resolution (see page 27). (Normally,

the image is enlarged or reduced to the most suitable size automatically.)

Timing Chart

Resolution

640 × 350

720 × 350

640 × 400

720 × 400

640 × 480

800 × 600

1024 × 768

1280 × 1024

640 × 480

832 × 624

1024 × 768

1152 × 870

1280 × 1024

1152 × 900

1280 × 1024

1024 × 768

1280 × 1024

1152 × 900

1280 × 1024

H Sync. (kHz)

31.5

37.9

31.5

37.9

31.5

37.9

31.5

37.9

37.5

43.3

35.2

37.9

46.9

48.1

53.7

48.4

56.5

58.1

60.0

68.7

64.0

80.0

91.1

35.0

49.7

60.2

68.7

81.1

61.8

81.1

49.7

63.9

71.7

78.1

V Sync. (Hz)

70.1

85.1

70.0

70.1

85.1

70.0

85.0

60.0

72.8

75.0

85.0

56.3

60.3

75.0

72.2

85.1

60.0

70.1

72.0

75.0

85.0

60.0

75.0

85.0

66.7

74.5

74.9

75.6

76.1

66.0

76.1

60.4

60.0

76.1

72.0

IBM PC/AT compatible machine

Apple Macintosh

Sun

SGI

(U3-1100WZ, U3-1100W, U3-1100SF)

The resolution of the unit is 1024 × 768. Other resolution images (e.g. 1280 × 1024) are compressed into 1024 × 768. In such a case, projected letters

and lines might appear unevenly.

(U3-810WZ, U3-810W, U3-810SF)

The resolution of the unit is 800 × 600. Other resolution images (e.g. 1024 × 768) are compressed into 800 × 600. In such a case, projected letters

and lines might appear unevenly.

E – 23

Download from Www.Somanuals.com. All Manuals Search And Download.

M a n u a l A d j u s t m e n t o f P e r s o n a l

C o m p u t e r I m a g e s

Adjusting Clock Frequency and Phase

Adjusting the position of the image

If the image is offset up, down, left or right, adjust the

vertical and horizontal position.

Select RGB as the input (page 16).

Press the MENU button to display the

main menu and then press the cursor ̇ /

̈ keys to select the “IMAGE”.

Perform steps 1 - 6 for Adjusting the

Clock Frequency and Phase on this page.

Press the cursor ̆ / ̄ keys and select

“POSITION”.

Press the cursor ̆ / ̄ keys to select the

“PICTURE ADJ”.

Press the cursor ̆ / ̄, ̇ / ̈ keys and

adjust the horizontal and vertical posi-

tion.

Press the cursor ̇ / ̈ keys and adjust the

image width in relation to the screen.

Adjustment is performed in dot units. Adjust to

the position where vertical flicker disappears.

Press the cursor ̆ / ̄ keys and select

“FINE PICTURE”.

Press the cursor ̇ / ̈ keys and adjust to

minimize image noise, flicker, color varia-

tions, etc.

Reconnecting a separate personal computer or

other device to the RGB jack

Either press the AUTO button on the main unit or open the FLIP

COVER of the remote control and press the AUTO button there.

If no images appear during setting

Use the following procedure when no images appear during setting

because the clock frequency or phase is grossly inaccurate.

1 Turn off the power of all devices connected.

The input signal will stop and either a blue or black background

(This depends on the Background setting. page 28) will be

projected.

2 Perform a reset (page 25).

3 Readjust the picture ADJ and fine picture

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

E – 24

Download from Www.Somanuals.com. All Manuals Search And Download.

R e s e t t i n g t h e L a m p

H o u r s o f U s a g e

R e s e t t i n g

Resetting

Resetting the time the hours of lamp

usage

All items can be reset to the standard settings except as

follows.

When the lamp is replaced (page 33), it is necessary to set

the lamp hours of usage from the menu.

• Lamp usage time

• KEYSTONE adjustment values (including the KEY-

STONE setting value: page 28).

Press the remote control MENU button,

use the cursor ̇ / ̈ keys to display the

“INFORMATION” menu and set the lamp

hours of usage.

• SOURCE CHANGE

Press the remote control MENU button to

display the normal menu and then press

the cursor ̇ / ̈ keys to select “INFOR-

MATION”.

Display the INFORMATION menu, use the

cursor ̆ / ̄ keys to select“LAMP USAGE

HOURS RESET” and then press the EN-

TER button.

When the INFORMATION menu appears,

press the cursor ̆ / ̄ keys select “RE-

SET”, then press the ENTER button.

If the ENTER button is not used during

reset, press the CANCEL button.

If the ENTER button is not used during

reset, press the CANCEL button.

When the power will not turn on because

the lamp usage hours of has exceeded

1100 hours

The power will not turn on when the lamp hours of usage

has exceeded 1100 hours. The status light will be on

continually (page 32). Thus, the menu cannot be displayed.

In such case, replace the lamp housing, then use the

following procedure to reset.

Connect the power cord (page 14).

Standby status will be activated.

Press the SOURCE and AUTO buttons of

the main unit at the same time for 5 sec. or

more.

The lamp hours of usage will be reset. After

resetting, the Status indicator (page 32) that

turned on because 1100 hours had been ex-

ceeded will turn off.

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

E – 25

Download from Www.Somanuals.com. All Manuals Search And Download.

S e t t i n g N a r r o w I m a g e s ( A d v a n c e d

M e n u )

Set the colors as desired in accordance

with the image contents.

Setting the Cinema Mode

This is the setting for enjoying video in a dark or light

room.

Subtle color settings are possible, as desired. Setting is

possible for each input.

This feature emphasizes the White which is available on

Video and S-Video input.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “COLOR”.

Select the image to be input (page 16).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “COLOR”.

Use the cursor ̆ / ̄ keys to select “CIN-

EMA”.

Use the cursor ̆ / ̄ keys to select

“GAMMA”.

Use the cursor ̇ / ̈ keys to set the

“CINEMA”.

Use the cursor ̇ / ̈ keys to set the

“GAMMA”.

The following can be selected.

"ON" is for a darkened room. Color around white

portion is natural and smooth.

"OFF" is for a bright-lit room. White is empha-

sized.

● Normal ● Natural ● Real ● Custom

Normal is standard settings; Natural stresses

coloring; Real stresses (brightness). Custom is

used to adjust freely as desired.

Use the cursor ̇ / ̈ keys to select “CUS-

TOM”, press the ENTER button to display

the sub-menu and then set the gamma

value.There are 31 index values.

Selecting the Color System

The following color systems can be used with this device.

● NTSC 3.58

● NTSC 4.43

● PAL

● PAL-M ● PAL-N

● PAL60

● SECAM

Only NTSC 3.58 and PAL can be used for component

video.

Adjusting Color Balance

Color balance (white balance) can be set for each input.

Selection is automatic when AUTO is used.

Select the image to be input (page 16).

Select an input for the color system to be

selected (page 16).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “COLOR”.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “COLOR”.

Use the cursor ̆ / ̄ keys to select

“COLOR TEMP”.

Use the cursor ̆ / ̄ keys to select

“COLOR SYSTEM” and then press the

ENTER button.

Use the cursor ̇ / ̈ keys to select the

“COLOR TEMP”.

Four different types of color balance can be set

beforehand: Low, Medium, Standard and High.

Use the cursor ̆ / ̄ keys to select the

color system and then press the ENTER

button.

When the ENTER button is pressed, the

sub-menu will be displayed to enable fine

adjustment.

To select other menu names

Press the MENU button. The cursor will disappear and the menu

selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 26

Download from Www.Somanuals.com. All Manuals Search And Download.

S e t t i n g i n A c c o r d a n c e

W i t h I m a g e C o n t e n t s

Setting the RGB/YCbCr connector

Setting the Display Frame

The RGB/YCbCr connector can be switched and used as

the component video signal (YCbCr) input connector.

The display frame can be set individually for each input.

Select the input for image selection (page

16).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “COLOR”.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “VIEW”.

Use the cursor ̆ / ̄ keys to select

“SOURCE CHANGE”.

Display the frame, then use the cursor ̆

/ ̄ keys to select “ASPECT”.

Use the cursor ̇ / ̈ keys to set the

“SOURCE CHANGE”.

The following can be selected.

Use the cursor ̇ / ̈ keys to set the

“ASPECT” ratio.

Any of the following four different settings can be

selected for images.

● RGB ● YCbCr

When component video (YCbCr) input is used,

use the optional component video cable.

●REAL (input signal projection without pixel re-

placement)

●AUTO (projection after automatic input signal

zoom in/zoom out)

●DIRECT (the original aspect ratio of the image

is maintained at all times)

●4:3 → 16:9 (4:3 aspect ratio images are pro-

jected after conversion to 16:9 aspect ratio)

Setting Filter

This is used to set the sharpness during pixel conversion

(image compression/enlargement).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “VIEW”.

Display the frame, then use the cursor ̆

/ ̄ keys to select “FILTER”.

Use the cursor ̇ / ̈ keys to set the

sharpness.

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

E – 27

Download from Www.Somanuals.com. All Manuals Search And Download.

S e t t i n g i n A c c o r d a n c e W i t h

I m a g e C o n t e n t s ( c o n t i n u e d )

I n i t i a l S e t t i n g s

Setting Keystone

Audio Muting

This is used to set the height for keystone adjustment.

Audio only can be muted for each input.

This function is convenient when multiple video units are

connected to this projector.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “VIEW”.

Select the input to be muted (page 16).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “SETUP”.

Display the frame, then use the cursor ̆

/ ̄ keys to select “KEYSTONE”.

Use the cursor ̇ / ̈ keys to select “NOR-

MAL” or “FULL”.

●Normal: normal keystone correction

Use the cursor ̆ / ̄ keys to select

“SOUND MUTE”, then use the cursor ̇ /

̈ keys to set muting to ON or OFF.

Selecting the Background

Two different backgrounds can be selected for projection

when there is no signal input.

●Full: In this mode, the image is enlarged to fill

the screen vertically and then Keystone correc-

tion is performed.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “SETUP”.

Use the cursor ̆ / ̄ keys to select

“BACKGROUND”.

Use the cursor ̇ / ̈ keys to select one of

the following backgrounds.

● Blue ● Black

Setting the partial display position

Auto Gain

Input a signal that is rated SXGA (XGA for the U3-810WZ,

U3-810W, U3-810SF) to RGB/YCbCr connector and then set

the partial display position with ASPECT (described later) set

to Real.

Brightness and contrast are adjusted automatically.

Select the input to be set for auto gain

(page 16).

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “VIEW”.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “SETUP”.

Display the frame, use the cursor ̆ / ̄

keys to select “PAN” and then press the

ENTER button.

Use the cursor ̆ / ̄ key to select “AUTO

GAIN”, then use the cursor ̇ / ̈ keys to

set ON or OFF.

Use the cursor ̆ / ̄, ̇ / ̈ keys to set the

display position.

To select other menu names

Press the MENU button. The cursor will disappear and the menu

selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 28

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Source Settings

Using the Power Saving Function

Automatically Searching The Input Signal

When there is no signal input for a period of 5 min. or

more, the power is automatically turned off and standby

status is activated.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “SETUP”.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ buttons to select “SETUP”.

Use the cursor ̆ / ̄ keys to select “AUTO

SOURCE”, then use the cursor ̇ / ̈ keys

to set ON or OFF.

ON: All input signals are searched.

OFF: Remote control VIDEO button:

Video and S-video are searched.

Remote control RGB button:

When SETUP menu is displayed, use the

cursor ̆ / ̄ keys to select “AUTO

POWER OFF”.

Use the cursor ̇ / ̈ keys to set Power

Saving to ON or OFF.

RGB and YCbCr signals are searched.

Main unit SOURCE button:

All input signals are searched individually.

Selecting a Projection Type

If the projection type is not correctly set in accordance with the

installation conditions, images may be projected reversed, verti-

cally, or horizontally.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “SETUP”.

When SETUP menu is displayed, use the

cursor ̆ / ̄ keys to select “PROJEC-

TION”, then press the ENTER button.

Use the cursor ̆ / ̄ keys to select a

projection type in accordance with the

set conditions.

The setting items will change as shown below

each time a key is pressed.

Normal

⇔

Reversed vertically+horizontally

Reversed vertically ⇔ Reversed horizontally

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

E – 29

Download from Www.Somanuals.com. All Manuals Search And Download.

S e t t i n g t h e M e n u

Selecting a Menu Language

Menu Viewing Settings

Any one of eight different languages can be selected for

menu displays.

The menu viewing method can be set with this function.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “OPTION”.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “OPTION”.

When OPTION menu is displayed, use the

cursor ̆ / ̄ keys to select“MENUTYPE”.

When OPTION menu is displayed, use the

cursor ̆ / ̄ keys to select “LANGUAGE”,

then press the ENTER button.

Use the cursor ̇ / ̈ keys to select

“TRANSLUCENT” or “OPAQUE”.

Use the cursor ̆ / ̄ keys to select one of

the following languages.

●English

Other Menu Settings

The time that the menu is displayed on the screen can be

set with this function.

●German

●French

●Italian

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “OPTION”.

●Swedish

●Spanish

●Chinese

●Japanese

When OPTION menu is displayed, use the

cursor ̆ / ̄ keys to select “DISPLAY

TIME”.

Setting the Menu Display Position

Use the cursor ̇ / ̈ keys to set a value

from 5 sec. to 30 sec.

The menu display position can be set with this function.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “OPTION”.

On-screen Display

This function is set to ON at the factory. When set to ON,

input will be projected onto the screen when the input is

switched with the remote control button. Also, the Input

menu will be displayed when the power is turned on to

indicate the selected input. In addition, status is displayed

on the menu bar when FREEZE, MUTE, ZOOM, KEY-

STONE or VOLUME is set.

When OPTION menu is displayed, use the

cursor ̆ / ̄ keys to select “MENU POSI-

TION” and then press the ENTER button.

Use the cursor ̆ / ̄, ̇ / ̈ keys to set the

display position.

With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor ̇ / ̈ keys to select “OPTION”.

When OPTION menu is displayed, use the

cursor ̆ /̄ keys to select“ON SCREEN”.

Use the cursor ̇ / ̈ keys to set ON or

OFF.

To select other menu names

Press the MENU button. The cursor will disappear and the menu

selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 30

Download from Www.Somanuals.com. All Manuals Search And Download.

O t h e r s

T r o u b l e s h o o t i n g

Please check the following before requesting repairs.

Symptom

Procedure

Reference page

The power will not turn on.

• Is the power plug connected to the power outlet?

• Is the lamp cover correctly installed?

• Is the internal temperature too high? A protective feature prevents the

power turning on when the internal temperature is too high.

• Has the lamp usage time exceeded 1100 hours? The power will not turn

on when 1100 hours have elapsed.

25, 32, 33

• Any high-tension noise to the power line with extremely high pulse can

stop the projector. If it happens, unplug the power cord from the outlet

once and then plug it again.

No image

• Has the connected input been selected?

16, 18

10, 11, 12

• Is the cable correctly connected to the input jack?

• Are the brightness and contrast set to minimum?

• Is the sliding lens cap closed?

• Is the lamp blown?

• Has the lamp usage time exceeded 1100 hours?

• If a notebook type computer is being used, was the computer power turned

on after the projector was connected? Is the computer set to disable out-

put to the external RGB jack?

25, 32, 33

12, 13

In many cases, when a notebook type computer is connected to the pro-

jector, a signal will not be output to the RGB OUT jack unless the com-

puter power is turned on.

• Does the STATUS indicator blink?

Distorted images

Blurred images

• Is installation correct?

• Was the Keystone adjustment performed correctly?

18, 28

• Is the lens properly focused?

• Are the screen and projector positioned at the correct angle?

• Does the projection distance place the screen outside the focus range?

• Is there condensation, dirt, etc., on the lens?

—

Condensation on the internal optical system is possible when the projec-

tor has been stored in a cool place and then is used in a warm place. In

such cases, wait several minutes for the condensation to evaporate.

Images are offset vertically or

horizontally and are not

correctly displayed

• Correctly adjust the horizontal and vertical position of the screen.

• Is the clock frequency correctly adjusted?

• Are the resolution and frequency correct for the input signal? Check the

resolution of the personal computer.

The remote control does not

work

• Does the send indicator (LED) light? If it does not light, the batteries are

exhausted. In such cases, replace with fresh batteries.

• Is there any obstacle between the remote control and the photoreceptor

of the main unit?

5, 8

• Is the remote control being used outside its effective range?

• Is there a fluorescent light or other strong light source close to the photo-

receptor?

—

The wireless mouse does not

work

• Is the MOUSE jack of the main unit and the personal computer correctly

connected?

• Was the personal computer started after being connected to the MOUSE

jack of the main unit?

The STATUS indicator blinks

• Check the STATUS indicator list.

Flickering text or offset colors

with RGB input

• Manually adjust the clock frequency and phase.

• Press the AUTO button.

There is no color

• Set the “COLOR” “B/W” switch to the COLOR side.

19B

(Only on the U3-1100WZ, U3-1100W, U3-810WZ, and U3-810W)

E – 31

Download from Www.Somanuals.com. All Manuals Search And Download.

W h e n t h e S T A T U S i n d i c a t o r l i g h t s o r f l a s h e s

STATUS indicator

POWER

STATUS

POWER

SOURCE

AUTO

Status Light Messages

Condition

OFF

Status

Normal

On Continually

The lamp usage has exceeded 1000 hours of operation and should be replaced.

• The lamp cover is not correctly attached. Replace it correctly.

Flashing Very Rapidly (On and off

in a cycle of 1 sec.)

• The temperature protector has been triggered. If the room temperature is high,

move the unit to a cool location. If the temperature within the unit is high, check the

cooling fan ventilation slots and the ventilation slots on the bottom of the unit. If

any of the slots are blocked, remove whatever is blocking them.

Flashing Rapidly

(On and off in a cycle of 4 sec.)

• The temperature protector has been triggered. If you try to turn on the unit immedi-

ately after turning off, sometimes the power does not come on. If this happens, wait

at least one minute, then turn on the unit again.

• The lamp lighting voltage error detection protector has been triggered. Wait at

least one minute before turning on the unit again. If this does not solve the problem,

please contact your dealer.

Flashing Slowly (On and off in a

cycle of 8 sec.)

The cooling fan has stopped. Contact your PLUS dealer for service.

Flashing Very Slowly (On and off in

a cycle of 12 sec.)

The lamp is not turned on.

• The unit was turned on immediately after being turned off. Turn off the unit, wait at

least one minute, then turn on the unit again.

• The lamp is dead. Replace the lamp cartridge. (See page 33.)

E – 32

Download from Www.Somanuals.com. All Manuals Search And Download.

R e p l a c i n g t h e l a m p c a r t r i d g e

The rated lamp life is about 1,000 hours. The rated lamp life is the average

life of the lamps produced and tested (under the test conditions of our

company) for a long term, however, it may become shorter depending on

the conditions of usage.

Step 3

After the lamp has been operating for 1000 hours or longer, the STATUS

indicator on the control panel will light and the “LAMP USAGE” icon

which shows hours of total lamp usage will be displayed on the screen.

When this happens, turn off the unit and replace the lamp cartridge with a

new one. The unit will not turn on after 1100 hours. (It will go off if it is in

use.)

Step 4

Lamp Cover

CAUTION

• DO NOT TOUCH THE LAMP immediately after it has been

used. It will be extremely hot. Allow at least one hour for the

lamp to cool before handling.

• DO NOT LOOSEN ANY SCREWS except for those men-

tioned in the instructions below. There is danger of electric

shock.

Step 5

Lamp cartridge replacement procedure

1 Disconnect the power cable.

Wait at least one hour for the lamp to cool.

2 Turn the unit upside down carefully.

3 Loosen the lamp cover securing screw.

4 Remove the lamp cover.

Lamp cartridge

Step 6

CAUTION: Do not use a lamp cartridge other than the PLUS

replacement lamp cartridge. Order this from your PLUS dealer

using the unit model number (see “Notes” below).

5 Loosen the three lamp cartridge securing screws.

(This unit has a safety switch.)

Step 7

6 Hold the handle then pull the lamp cartridge upward to remove

it.

7 Install the new lamp cartridge.

8 Secure the lamp cartridge with the three screws.

9 Replace the lamp cover and secure it with the securing screw.

10 Return the unit to the normal position, connect the power cable,

and turn on the unit.

Step 8

11 Reset “LAMP USAGE.” (See page 25).

Notes

• When the lamp usage time reaches 1100 hours, it becomes impossible

to switch on the power and menus are not displayed. In such a case,

see “If the unit doesn’t go on because lamp usage exceeds 1100

hours” on page 25.

Step 9

• Obtain a replacement lamp cartridge at the store where the unit was

purchased. Please specify the following information when ordering a

replacement lamp cartridge:

– Model name : U3-130

– Product code : 28-390

E – 33

Download from Www.Somanuals.com. All Manuals Search And Download.

S p e c i f i c a t i o n s

Optical

DMD^TM

Single Chip Digital Micro Device (DMD^TM

)

1024

768 dots (U3-1100WZ, U3-1100W, U3-1100SF) / 800

600 dots (U3-810WZ, U3-810W, U3-810SF)

Lamp

High Performance Compact Lamp 130W

Lens

See below.

Image Size

Projection Distance

Light Output

Contrast Ratio

See below.

1000 ANSI lumens (normally white) / See below for more details about the B/W mode.

650 : 1

Electrical

Inputs

Video (NTSC / PAL / PAL_M / PAL_N / PAL60 / SECAM / NTSC4.43)

RGB (H:15 to 91 kHz, V: 50 to 85 Hz)

Full color, 16.7 million colors simultaneously.

U3-1100WZ, U3-1100W, U3-1100SF : SXGA (Compression), XGA(True), SVGA/VGA (Expansion/True)

U3-810WZ, U3-810W, U3-810SF : XGA (Compression), SVGA (True), VGA (Expansion/True)

Color Reproduction

Resolution

Power Requirement

Power Consumption

Input Current

100 to 120/220 to 240 V AC, 50/60 Hz

180 watts

1.8A / 1.0A

Mechanical

Dimensions Excluding Stand

Weight

23.0 cm (W)

4.8 cm (H)

17.7 cm (D) / 9.0 in.(W)

1.9 in.(H)

7.0 in.(D)

Apploximately 1.5 kg / 3.3 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

Remote control: 0° to 60°C (32° to 140°F)

Regulations

UL Approved (UL 1950, CSA 950)

Meets FCC Class A requirements

Meets EMC Directive (EN55022, EN55024)

Meets Low Voltage Directive (EN60950)

U3-810W, U3-810SF

Fixed focus

Manual focus

U3-1100W, U3-1100SF

Fixed focus

Manual focus

U3-810WZ

Manual zoom (x1.2)

Manual focus

U3-1100WZ

Manual zoom (x1.2)

Manual focus

Lens

F=2.4 f = 23 mm

Minimum 35"

(Projection distance 1.2m)

Maximum 200"

F = 2.4 f = 23 mm

Minimum 36"

(Projection distance 1.2m)

Maximum 200"

F = 2.4 - 2.6 f = 27.5 - 33.0 mm F = 2.4 - 2.6 f = 27.5 - 33.0mm

Minimum 25" Minimum 26"

(Projection distance 1.2m at tele) (Projection distance 1.2m at tele)

Maximum 200" Maximum 200"

(Projection distance 9.8m at wide) (Projection distance 9.4m at wide)

Image size

(Projection distance 6.8m)

(Projection distance 6.6m)

U3-810W, U3-810SF

Fixed focus

Manual focus

U3-1100W, U3-1100SF

Fixed focus

Manual focus

U3-810WZ

Manual zoom (x1.2)

Manual focus

U3-1100WZ

Manual zoom (x1.2)

Manual focus

Lens

F=2.4 f = 0.9 inch

Minimum 35"

F = 2.4 f = 0.9 inch

Minimum 36"

F = 2.4 - 2.6 f = 1.1 - 1.3 inch

Minimum 25"

F = 2.4 - 2.6 f = 1.1 - 1.3 inch

Minimum 26"

(Projection distance 3.9 feet)

Maximum 200"

(Projection distance 3.9 feet)

Maximum 200"

(Projection distance 3.9 feet at tele)

Maximum 200"

(Projection distance 3.9 feet at tele)

Maximum 200"

Image size

(Projection distance 22.3 feet)

(Projection distance 21.6 feet)

(Projection distance 32.2 feet at wide) (Projection distance 30.8 feet at wide)

Applicable models to Color mode

Mode Select System

Brightness

U3-810W, U3-810WZ, U3-1100W, U3-1100WZ

Selected with the switch on the top cabinet

2200ANSI lumens

D-Sub Pin Assignments

Pin No.

Signal to be connected

PC 15-Pin mini D-Sub

Red

Green

Blue

GND

Red GND

Green GND

Blue GND

No Connection

Digital GND

GND

SDA

Horizontal Sync

Vertical Sync

SCL

E – 34

Download from Www.Somanuals.com. All Manuals Search And Download.

Dimensions

U3-1100WZ, U3-810WZ

230 mm/9.0″

A U T O

S O U R C E

S T A T U S

P O W E R

B / W

C O L O R

O P E N

27 mm/

1.1″

48 mm/

1.9″

11 mm/

0.4″

U3-1100W, U3-810W

230 mm/9.0″

A U T O

S O U R C E

S T A T U S

P O W E R

B / W

C O L O R

O P E N

27 mm/

1.1″

48 mm/

1.9″

11 mm/

0.4″

E – 35

Download from Www.Somanuals.com. All Manuals Search And Download.

U3-1100SF, U3-810SF

230 mm/9.0″

A U T O

S O U R C E

S T A T U S

P O W E R

O P E N

27 mm/

1.1″

48 mm/

1.9″

11 mm/

0.4″

E – 36

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Digital Photo Frame SPF3010C G7 User Manual
Philips DVD Player DVD737 User Manual
Philips Iron HI 22 User Manual
Philips Satellite TV System SDV1121T 27 User Manual
Philips Work Light MFB User Manual
Porter Cable Grinder PCB575BG User Manual
Poulan Chainsaw P3314 User Manual
Poulan Lawn Mower 191713 User Manual
Presto Fryer ProFry User Manual
ProForm Home Gym PFBE18160 User Manual