PLUS Vision Projector KG PS120X User Manual

DATA PROJECTOR

User’s Manual

KG-PS100S

KG-PS120X

KG-PS125X

M E N U

T U S

S T

A N D B Y

S T

Q U I C K M E N U

P O W E R

E R

I E W

I R E L E S S

Q U I C K C O L O R A D J

C O M P U T E R

S T A N D B Y

P O W E R /

IMPORTANT

* DLP^®(Digital Light Processing) and DLP^®chip are registered trademarks ofTexas Instru-ments Incorporated (U.S.A.).

* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).

* S-VGA is a registered trademark of Video Electronics Standards Association.

* Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries).

* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).

Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies

and to the product trademarks.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INFORMATION

Precautions

Please read this manual carefully before using your KAGA COMPONENTS Data Projector and keep the manual

handy for future reference.

This user's manual covers models KG-PS100S, KG-PS120X, and KG-PS125X.

The projection distance is the same in these models, but the inclusion of functions that can use Image Viewer and

Wireless Network depends on the model.

See the table below for details.

This manual describes the full complement of functions of the KG-PS125X model.

Model Name

KG-PS125X

KG-PS120X

KG-PS100S

Wireless Network

Image Viewer

Display Resolution

1024

768 (XGA)

1024

768 (XGA)

800

600 (S-VGA)

—

k : Function included — : Function not included

Note that when a function is applicable to a certain model, Applicable Model: KG-PS * * * * will be cited at the

location of the description.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED KAGA COMPONENTS SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude

to cause electric shock.Therefore, it is dangerous to make any kind of contact with any part inside

of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of

this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

The above cautions are given on the bottom of the product.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS

UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS

CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS

INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED KAGA COMPONENTS SERVICE PERSONNEL.

Applicable Model: KG-PS100S/KG-PS120X

RF Interference

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation.This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorientate or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-

tions.

Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.

_{Download from Www.Somanuals.c}E_om-2_{. All Manuals Search And Download.}

IMPORTANT SAFETY INFORMATION

Applicable Model: KG-PS125X

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

RF Interference

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT

those specified by KAGA COMPONENTS in this manual. Failure to comply with this government regulation

could void your right to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment.This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

You are cautioned that changes or modifications not expressly approved by the party responsible for compli-

ance could void your authority to operate the equipment.

DOC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-

tions.

_{Download from Www.Somanuals.c}E_om-3_{. All Manuals Search And Download.}

IMPORTANT SAFETY INFORMATION

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them

carefully and heed all warnings.

Installation

•

For best results, use the unit in a darkened room.

Place the unit on a flat, level surface in a dry area away from dust and moisture.

Do not place the unit in direct sunlight, near heaters or heat radiating appliances.

Exposure to direct sunlight, smoke or steam can harm internal components.

Handle the unit carefully. Dropping or jarring can damage internal components.

Do not place heavy objects on top of the unit.

Power Supply

•

The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure that your power supply

fits these requirements before attempting to use the unit.

Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or

fire.

Disconnect the power cable (main’s lead) from the power outlet after using the unit.

Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or

in green).

Cleaning

•

Disconnect the power cable (main’s lead) from the unit.

Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use

strong detergents or solvents such as alcohol or thinner.

•

Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated

dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.

Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice

tool, to prevent the damage to the unit.

Lamp Replacement

•

Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000

hours of usage, the lamp will turn off.

Fire and Shock Precautions

•

Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside

the unit. Allow at least 10 cm (4 inches) of space between the unit and walls.

•

Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve

any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If

something should fall into the unit, immediately disconnect the power cable from the unit and have the object

removed by a qualified KAGA COMPONENTS service person.

•

Do not place any liquids on top of the unit.

Carrying around

When carrying the unit around, please use the storage case that comes with it and, to protect the lens from

scratches, always shut the Iris Lens Cover. Also, do not subject the unit to strong mechanical shock.

CAUTION – HOT!

The area around the exhaust vents is hot during and immediately after image projection.

To avoid burns, keep your hands away from this area.

Wait until the exhaust vents area cools off before touching it.

Do not look into the lens while the unit is on. Serious damage to your eyes could result.

_{Download from Www.Somanuals.c}E_om-4_{. All Manuals Search And Download.}

Major Features

Ⅵ High-brightness, lightweight projector with wireless network presentation and PC-less

presentation functions

The synergy of DLP^®technology and the unique optical design raises the efficiency of light usage. One DLP^®chip reproduces

the three primary colors (red, green, and blue) required in the expression of color. These factors have enabled the achieve-

ment of high brightness together with compact size and light weight. Also, by employing wireless LAN technology, wireless

presentations can be made without having an RGB cable connection with the PC. Using the Image Viewer function enables

image files that have been saved on SD memory cards or USB memory devices to be presented without carrying around a

personal computer. ⁽*¹⁾

*1. For details, refer to the “Image Viewer / Wireless Network” section.

Ⅵ Sharp, clear picture

The DLP^®display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting

the display of small characters and diagrams with distinct clarity.

Ⅵ Advanced Color Wheel (ACW) allows for further enhancement of color reproduction

KAGA COMPONENTS’unique ACW preserves brightness, while allowing for superlatively enhanced color reproduction and

astoundingly clear picture quality attainable only with DLP^®technology.

Ⅵ High contrast ration of 2000:1

DLP^®technology employed in this projector makes possible an astonishing 2000:1 high contrast ratio.

By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just

the brightness based on specifications.

Ⅵ Great moving image playback capabilities using the same principles as DLP^®Cinema

KAGA COMPONENTS DLP^®type projectors have the same makings as the DLP^®Cinema used in movie theaters. Because

of their extremely fast response, even images with much movement – sports, movies – play smoothly without blurring.

Ⅵ Security lock function

The lock can be set so that a password must be input when the projector is started up. Without the correct password, no

operations other than turning the power on and off can be performed. This function effectively protects the projector from

unauthorized use.

Ⅵ Powerful functions for presentations

A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used

when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC

signal.

There is also a built-in “Presentation Timer” function for further presentation convenience.

Ⅵ Beautiful reproduction of high-quality images from DVD

Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD

and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLP^®

display system projector.

_{Download from Www.Somanuals.c}E_om-5_{. All Manuals Search And Download.}

Table of Contents

IMPORTANT SAFETY INFORMATION ................................................................................... E-2

Major Features ....................................................................................................................... E-5

Table of Contents ................................................................................................................... E-6

Checking the Supplied Accessories .................................................................................... E-8

Names of the Main Unit Parts ............................................................................................. E-10

Names of the Remote Control Parts................................................................................... E-12

Preparing the Remote Control ............................................................................................ E-13

Button Battery Replacement ..................................................................................... E-13

Remote Control Range ............................................................................................. E-13

The Procedure Up to Projecting to the Screen ................................................................. E-14

Placement Guide .................................................................................................................. E-15

Screen Size and Projection Distance ........................................................................ E-15

Connecting Personal Computers and Video Equipment .................................................. E-16

Connections with Personal Computer ....................................................................... E-16

Connect the projector’s COMPUTER IN connector

using the included RGB signal cable. .............................................................. E-16

To Output the External Output Signal of a Notebook Computer ......................... E-17

Connections with Composite Signals ........................................................................ E-18

Video Equipment with VIDEO Connectors .......................................................... E-18

Video Equipment with S-VIDEO Connectors ...................................................... E-18

Connections with Component Signals....................................................................... E-19

When the Video Equipment Has a YCbCr Connector or YPbPr Connector ........ E-19

Connections with the AUDIO Jack ............................................................................ E-20

Power Cable Connections and Switching the Power On/Off ........................................... E-21

Operating................................................................................................................... E-21

Finishing .................................................................................................................... E-23

Adjustment of the Projection Screen ................................................................................. E-24

Adjustment of the Projection Screen ......................................................................... E-24

Making Adjustments with the Adjusters .............................................................. E-25

General Operation ................................................................................................................ E-26

Input Selection .......................................................................................................... E-26

Automatic Adjustment ............................................................................................... E-26

Selection of Aspect Ratio .......................................................................................... E-27

Freezing a Moving Picture ......................................................................................... E-28

Cancelling Video and Audio Temporarily ................................................................... E-28

Eco Mode .................................................................................................................. E-28

Quick Color Adj. ........................................................................................................ E-28

Keystone Manual Adjustment .................................................................................... E-29

Adjustment of the Volume.......................................................................................... E-29

Enlargement of the Image and Video Movement ...................................................... E-30

Protecting the Projector with the Security Lock ......................................................... E-31

Using the Quick Menu ............................................................................................... E-33

Menu Operation Method ...................................................................................................... E-34

Performing Menu Operations .................................................................................... E-36

List of Item Names Offering Input Selection and Adjustments/Settings .................... E-39

Image ..................................................................................................................................... E-41

Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-41

Picture Adj. / Fine Picture / H Position / V Position .................................................... E-41

Reset ......................................................................................................................... E-42

Color...................................................................................................................................... E-43

Quick Color Adj. ........................................................................................................ E-43

Gamma ..................................................................................................................... E-43

Color Temp. ............................................................................................................... E-44

White Level ................................................................................................................ E-44

Color Space .............................................................................................................. E-44

White Balance ........................................................................................................... E-45

_{Download from Www.Somanuals.c}E_om-6_{. All Manuals Search And Download.}

Table of Contents

View ....................................................................................................................................... E-46

Aspect Ratio .............................................................................................................. E-46

Filter .......................................................................................................................... E-46

Vertical Flip / Horizontal Flip...................................................................................... E-47

Keystone.................................................................................................................... E-47

Auto Keystone ........................................................................................................... E-47

Setup ..................................................................................................................................... E-48

Auto Source............................................................................................................... E-48

Auto Power Off .......................................................................................................... E-48

Menu Position ............................................................................................................ E-48

Eco Mode .................................................................................................................. E-49

Input Format .............................................................................................................. E-49

Presentation Timer .................................................................................................... E-50

Volume ...................................................................................................................... E-50

Option ................................................................................................................................... E-51

Language .................................................................................................................. E-51

On Screen ................................................................................................................. E-51

Background ............................................................................................................... E-51

Startup Screen .......................................................................................................... E-52

Security Lock ............................................................................................................. E-52

Network Password..................................................................................................... E-52

Info......................................................................................................................................... E-53

Status ........................................................................................................................ E-53

Factory Default .......................................................................................................... E-53

Lamp Timer Reset ..................................................................................................... E-53

Resolution / Frequency ............................................................................................. E-54

Lamp Timer ............................................................................................................... E-54

When an Indicator is Lit or Flashing .................................................................................. E-55

Troubleshooting ................................................................................................................... E-56

Cleaning ................................................................................................................................ E-57

Replacing the Lamp Cartridge ............................................................................................ E-58

Specifications ....................................................................................................................... E-61

Table of Supported Frequency ........................................................................................... E-64

Cabinet Dimensions ............................................................................................................ E-65

_{Download from Www.Somanuals.c}E_om-7_{. All Manuals Search And Download.}

Checking the Supplied Accessories

Remove the main unit and the accessories from the box and check that the following items are included.

Wireless remote control unit (with wireless LAN)

(includes one button battery) [1]

Applicable Projector: KG-PS125X

This controls the projector. Please remove the transportation

insulation sheet at time of purchase. (See Page E-13.)

RGB signal cable

(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]

This is used in making connections with a personal computer.

See Page E-16 about connections.

No. M01800500

V I E W E R

S S

L E

I R E

Z O O M

A D

I C

L O

Q U

K S T N

E C O

V O L

Q U I C K

M U T E

M E N U

F R E E Z E

E N T E R

C A N C E L

V I D E O

C O M P U T E R

Wireless remote control unit (without wireless LAN)

(includes one button battery) [1]

Audio conversion adapter (Mini plug / RCA pin plug, 15 cm

/ 0.5 feet) [1]

Applicable Projector: KG-PS100S/KG-PS120X

This controls the projector. Please remove the transportation

insulation sheet at time of purchase. (See Page E-13.)

This cable is used with equipment whose audio connector is

of the phono pin type. Connections are described on Page

E-20.

No. M01800600

A U T O

A S P E C T

E C O

Z O O M

I C

K S T N

V O L

Q U I C K

M U T E

M E N U

F R E E Z E

E N T E R

C A N C E L

V I D E O

C O M P U T E R

SD wireless LAN card [1]

Applicable Projector: KG-PS125X

Power cable (1.8 m / 5.9 feet) [1]

This power cable supplies power to the unit. See Page E-21

about connections.

Ferrite cores [3]

These ferrite cores are attached to power cable, video cable

and S-video cable.

Mounting → See Pages E-18, 21.

“WARNING”

Handling the cables supplied with this product, will ex-

pose you to lead, a chemical known to the State of Cali-

fornia to cause birth defects or other reproductive harm.

Wash hands after handling.

_{Download from Www.Somanuals.c}E_om-8_{. All Manuals Search And Download.}

Checking the Supplied Accessories

Storage case (for projector and accessories) [1]

This case is designed to hold the projector itself and its acces-

sories.

HOW TO PUTTHE PROJECTOR INTO THE STORAGE CASE

Close the lens cover, then place the projector in the case

with the lens facing upward.

Use it when storing the projector.

Place the accessories in the storage pocket.

E P

S A

O O

S K

C N

M E N U

Y B

C I

User’s Manual (CD-ROM edition) [1]

User’s Manual (Simplified Edition) [1]

Security Sheet [1]

Security Label [1]

_{Download from Www.Somanuals.c}E_om-9_{. All Manuals Search And Download.}

Names of the Main Unit Parts

Speaker

Remote control

sensor [E-13]

T U

S T

Ventilation slots

I C

Exhaust vents

Adjuster button [E-25]

Zoom ring [E-24]

Focus ring [E-25]

Front adjuster [E-25]

Lens

Lens cover

Lamp cover [E-59]

Rear adjusters [E-25]

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Names of the Main Unit Parts

STATUS indicator [E-28, 49, 55]

STANDBY indicator [E-21, 55]

POWER indicator [E-21, 55]

Keystone Manual Adjustment

button [E-29]

Buttons used in menu and

quick menu operations

[E-33, 34]

POWER

STANDBY STATUS

POWER/STANDBY button

[E-21, 23]

QUICK MENU

SELECT (̆̄̇̈) buttons

QUICK MENU button [E-33]

AUTO button [E-26]

ENTER button [E-34]

SOURCE button [E-26]

MENU button [E-34]

POWER

QUICK MENU

ANDBY

TUS

Built-in security slot

(See description below.)

USB slot

See Page 15 (“Image Viewer / Wireless Network”

section)

Ventilation slot

Applicable Model: KG-PS125X

AC IN connector [E-21]

SD CARD

SD CARD slot

See Page 14 (“Image Viewer / Wireless Net-

work” section)

S-VIDEO connector [E-18]

VIDEO connector [E-18]

S-VIDEO

VIDEO

COMPUTER IN

AUDIO

Applicable Model: KG-PS125X

Remote control sensor [E-13]

COMPUTER IN connector [E-16, 19]

AUDIO connector [E-20]

Built-in Security Slot

This security slot supports the MicroSaver Security System manufactured by

Kensington Microware Inc.

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Names of the Remote Control Parts

Two types of remote control are available for this projector, and both types are described.

See the description of the remote control (and the drawing) for the type supplied with the projector.

Precautions

Handling of the Remote Control

* Do not drop the remote control or handle it inappropriately.

* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry

immediately.

* Try to avoid use in hot and/or humid locations.

* Please keep button battery out of the reach of children. If a battery is swallowed, promptly obtain the medical care of

a doctor.

* Remove the battery from the remote control when it is not going to be used for a long period.

* Some operations (such as menu operations) are available only through the use of the remote control and attention

should be given to its careful handling.

Names of the Remote Control Parts

1. Infrared transmitter [E-13]

8. KSTN button [E-29]

(Keystone correction adjustment)

2. POWER/STANDBY button [E-21, 23]

This button is used to switch ON the power

and set the unit to the STANDBY mode.

POWER/

9. ZOOM button [E-30]

(Digital zoom adjustment)

STANDBY

QUICK

ENTER

COMPUTER

VIDEO

3. Buttons used for input selection [E-26]

10. SELECT Buttons [E-34]

CANCEL

COMPUTER button and VIDEO button

The

and

buttons are the

13 (Video / S-Video)

select (̆, ̄, ̇ and ̈) buttons.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

4. MUTE button [E-28]

(Temporarily cancels the video and audio)

11. QUICK button [E-33]

(Displays a simplified menu)

VOL

ZOOM

5. Input buttons [E-31]

(Used for the security lock.)

12. ECO button [E-28]

(Selection of lamp mode)

6. FREEZE button [E-28]

(Freezes moving pictures)

13. QUICK COLOR ADJ button [E-28]

7. VOL button [E-29]

(Volume adjustment)

The function of the buttons below will differ depending on the model.

Applicable Model: KG-PS125X Applicable Model: KG-PS100S/KG-PS120X

WIRELESS

VIEWER

ASPECT

VOL

KSTN

ZOOM

VOL

KSTN

ZOOM

AUTO

14. WIRELESS button

14. ASPECT button [E-27]

See “Image Viewer / Wireless Network” section.

(Selects the vertical and horizontal ratio of the screen)

15. VIEWER button

See “Image Viewer / Wireless Network” section.

15. AUTO button [E-20]

(Automatic adjustment of the RGB moving image)

E-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparing the Remote Control

Button Battery Replacement

Using the remote control for the first time

The battery compartment is fitted with a transportation insulation sheet at the time of shipping.Pull

out the sheet and remove it. The remote control is now ready for use.

Replacement Method

(A) With the knob pressed to

Remove the old battery and in-

Insert the battery holder into the re-

1_{the right side, (B) draw out the}2_{stall a new button battery with (+)}3_{mote control and push in until the}

battery case.

side facing upward in the battery

holder.

battery holder closes with a “click”

sound.

CR2025

(B)

(A)

Purchase a CR2025 type battery for replacement.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type (CR2025) recommended by the manufacturer.

Dispose of used batteries according to your local regulations.

CAUTION

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Remote Control Range

Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit

and operate.

Reception of the remote control signal should generally be possible within the range illustrated below.

4m/13.1 feet

Remote control

sensor

30°

20°

Remote con-

trol infrared

transmitter

7m/23.0 feet

6m/19.7 feet

Side View

3m/9.8 feet

4m/13.1 feet

50°

Remote control in-

frared transmitter

50°

Remote control

sensor

7m/23.0 feet

Top View

Note

* Exposure of the main unit’s remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal

by an obstacle located in the pathway may prevent operation.

* To prevent operational difficulties with the sensor when the projector is installed suspended, install the projector 1.5 m or further from

fluorescent lighting.

* The remote control will not function when the battery is exhausted.

E-13

Download from Www.Somanuals.com. All Manuals Search And Download.

The Procedure Up to Projecting to the Screen

Perform setup adjustments in the following order.

Position the projector

Determine the locations to set up the screen and the projector.

See “Placement Guide” on Page E-15.

Connect the video equipment and personal computer

Connect your equipment to the projector.

When making connections with the personal computer’s RGB connector, see “Connections with

Personal Computer” on Page E-16.

When making connections with the video equipment’s video connector or an S-video connector,

see “Connections with Composite Signals” on Page E-18.

When making connections with the video equipment’s YCbCr connector or YPbPr connector,

see “Connections with Component Signals” on Page E-19.

When playing the audio through the built-in speaker of the projector, see “Connections with the

AUDIO Jack” on Page E-20.

Open the lens cover

Connect the power cable and switch on the projector power

See “Operating” on Page E-21.

See “Finishing” on Page E-23.

When selecting the language of menu displays, etc.

(Only when the power is first switched on following purchase)

See “When [Menu Language Select] is Displayed Upon Switching On the Power” on Page E-22.

Switching on the power of the personal computer and video equipment

Properly adjust the projection image to the screen

See “Adjustment of the Projection Screen” on Page E-24.

Selecting input equipment

See “Input Selection” on Page E-26.

Adjust the screen or video image

Adjust the image to the optimum condition as required.

See the Table of Contents for the adjustment items.

About DLP^®projectors

Though careful attention is paid to providing optimum quality, please note that with DLP^®type projectors, in rare cases there may

be black spots or bright spots among the picture elements.

Note:

* Please purchase a screen.

* A component cable, which is commercially available, is required to connect a DVD player or other equipment having YCbCr connectors.

* A component cable, which is commercially available, is required to connect high definition (HD) video equipment or other equipment

having YPbPr connectors.

E-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Placement Guide

• Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or

to find out the approximate size of a screen that will be required.

• The projection distance over which focussing is adjustable is 1.20 m (3.9 feet) to 11.78 m (38.65 feet). The projector

should be placed within this range.

Screen Size and Projection Distance

Screen Size Designation (Inches)

300"

Height from center of

lens to top edge of

the projection

250"

200"

Height from center of

lens to bottom edge

of the projection

150"

120"

100"

80"

60"

40"

Unit: m (feet)

38.65)

–

32.09)

–

11.78 (33.43

–

31.7"

Width

25.62)

–

10.19

–

9.78 (27.76

8.46

19.19)

–

7.81 (22.18

1.53

5.02) 2.32

–

7.61)

–

ER/

15.32)

12.73)

–

STAN

DBY

–

10.17)

1.20 (3.94)

1.32

(4.33 2.00

(6.56

–

6.76

5.85 (16.60

3.10 (8.79

–

4.67 (13.25

3.88 (11.02

5.06

2.68

–

4.04

3.36

Screen size (Diagonal)

Height

Lens surface of

the main unit

Screen Size

Designation (Inches)

Screen Size Width x Height

Projection Distance

(m) (feet)

Wide – Tele Wide – Tele

Height h1

Height h2

(m)

(feet)

(m)

(feet)

(m)

(feet)

31.7"

40"

0.64

0.48

0.81

0.61

1.22

0.91

1.63

1.22

2.03

1.52

2.44

1.83

2.11

1.59

2.67

2.00

4.00

3.00

5.33

4.00

6.67

5.00

8.00

6.00

— – 1.20

1.32 – 1.53

2.00 – 2.32

2.68 – 3.10

— – 3.94 0.54

4.33 – 5.02 0.67

6.56 – 7.61 1.00

8.79 –10.17 1.35

2.09

2.20

3.30

4.43

5.52

6.62

8.29

0.06

0.09

0.13

0.16

0.19

0.24

0.20

0.30

0.43

0.52

0.62

0.79

1.02

1.28

1.54

60"

80"

100"

120"

150"

200"

250"

300"

3.36 – 3.88 11.02 –12.73 1.68

4.04 – 4.67 13.25 –15.32 2.02

5.06 – 5.85 16.60 –19.19 2.53

3.05

2.29 10.00

7.50

4.06

3.05 13.33

10.00 6.76 – 7.81 22.18 –25.62 3.36 11.02 0.31

5.08

3.81 16.67

12.50 8.46 – 9.78 27.76 –32.09 4.20 13.78 0.39

6.10

4.57 20.00

15.00 10.19 –11.78 33.43 –38.65 5.04 16.54 0.47

* There is a tolerance of 5% due to design values.

* This table uses the lens apex and lens center as references and requires that the projector be in a

horizontal condition (with front and rear adjusters fully withdrawn).

E-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Personal Computers and Video Equipment

Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at

conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip-

ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home

theater.

Connections with Personal Computer

Please check the following before making connections with the personal computer.

•

An appropriate resolution for the KG-PS100S is 800 x 600 dots (S-VGA), and the maximum displayable resolution is XGA

(1024 x 768 dots).

An appropriate resolution for the KG-PS120X/KG-PS125X is 1024 x 768 dots (XGA), and the maximum displayable resolution

is S-XGA (1280 x 1024 dots).

Change to a displayable resolution at the PC side. See “Table of Supported Frequencies” on Page E-64.

The setting method for the personal computer will differ depending on the specific model. Please read the personal computer

instruction manual or the on-line help information, or contact the manufacturer of your personal computer.

•

Connect the projector’s COMPUTER IN connector using the included RGB signal cable.

•

When making connections with the COMPUTER IN connector of the projector, please make the connection via the supplied

RGB signal cable.

•

The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Com-

puter” using the menu sequence of [Setup] → [Input Format] → [Computer].

See “Input Format” on Page E-49.

MONITOR OUT

Personal

computer

RGB signal cable (Supplied item)

Note:

* Before making connections, check the power of the projector and the equipment to be connected is switched off.

* When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer

startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the on-

line help.

E-16

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Personal Computers and Video Equipment

To Output the External Output Signal of a Notebook Computer

When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook

computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your

notebook computer or the on-line help while performing the following procedure.

Check whether a signal is being sent from the notebook computer to the projector.

An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external

output signal is being output.

REFERENCE: When “Resolution” or “Frequency” is not displayed under “Info.” on the menu of the projector, this means that

the external output signal is not being output from the personal computer. See “Resolution/Frequency” on Page E-64.

Should a sign not be output from the notebook computer, please try the operation described below.

For an IBM PC/AT compatible computer, press the [Fn] key plus any one of the [F1] to [F10] keys. (See the table below.)

Manufacturer

DELL

Model

Key

All computers

Fn + F8

Fn + F10

Fn + F5

Fn + F7

Fn + F3

Fn + F5

Fn + F7

Fn + F3–F5

Fn + F5

Fn + F7

EPSON

FUJITSU

MITSUBISHI

IBM

NEC

Panasonic

SHARP

SONY

SOTEC

TOSHIBA

HITACHI

Note: Table information is current to December 2006.

Note:

When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be

correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook

computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the

liquid crystal panel which might result in external output only.

E-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Personal Computers and Video Equipment

Connections with Composite Signals

Video Equipment with VIDEO Connectors

• Connect to the projector’s VIDEO connector using a commercially available video cable.

• The input setting of theVIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please

change the input setting to “Your Country’sTelevision Broadcast System” using the menu sequence of [Setup] → [Input Format]

→ [Video].

See “Input Format” on Page E-49.

Video Equipment with S-VIDEO Connectors

• Connect to the projector’s S-VIDEO connector using a commercially available S-Video cable.

• The input setting of the S-VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project,

please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input

format] → [S-Video].

See “Input Format” on Page E-49.

Video deck, DVD player, document

camera, etc.

S-VIDEO

VIDEO

Ferrite core (Supplied item)

Video cable (RCA pin plug)

(Commercially available)

S-Video cable (Mini DIN 4-pin plug)

(Commercially available)

Attaching the Ferrite Core

Gather the commercially-available video cable and S-video cable as illustrated in the diagram and attach the supplied ferrite

core.

Ferrite core

Cable

E-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Personal Computers and Video Equipment

Connections with Component Signals

When the Video Equipment Has a YCbCr Connector or YPbPr Connector

• The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo-

nent” using the menu sequence of [Setup] → [Input Format] → [Computer].

See “Input Format” on Page E-49.

• When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or

another color, change the setting under the menu of [Color] → [Color Space].

See “Color Space” on Page E-44.

Component cable (Commercially available)

(Mini D-sub 15-pin to RCA

Green

Blue

Red

COMPONENT

Green

Blue

Red

Component cable (Commercially available)

(Mini D-sub 15-pin to RCA

E-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Personal Computers and Video Equipment

Connections with the AUDIO Jack

* Connect to the projector’s AUDIO jack using a commercially available audio cable. When the audio jack of the equipment that

is to be connected is of the RCA phono type, make connection via the supplied audio conversion adapter.

* The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the

audio output of the video equipment to your audio system.

* The built-in speaker outputs the audio of the equipment connected to the AUDIO jack.The built-in speaker outputs the audio of

the equipment connected to the AUDIO connector. Note that audio will not be output unless a video signal is input.

Audio cable (Mini plug)

(Commercially available)

White

AUDIO OUT

Audio conversion cable

(Mini-jack/ RCA pin plug)

(Supplied item)

Red

Audio cable (Mini plug)

(Commercially available)

E-20

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

Connect the AC IN connector of the projector and the power outlet using the supplied power cable.

The STANDBY indicator will light in green, and the unit will enter the standby mode.

Firmly plug in

all the way.

POWER

To wall outlet

STANDBY STATUS

Attaching the Ferrite Core

Lit green

Ferrite core

Cable

Note:

•

When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached

easily.

•

The included power cable is exclusively for use with this product. Never use it with other products.

Press the POWER/STANDBY button after the STANDBY indicator is lit in green.

ቢ Turn the lens cover clockwise.

ባ When the lens cover stops with a click, the

projector is ready for projection.

Switch on the projector power

Press the POWER/STANDBY button.

POWER

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

(button on main unit)

CANCEL

The first time the power is switched on after purchase, [Menu

Language Select] will be displayed. See Page E-22 for informa-

tion about language selection.

• When the power is turned on, the POWER indicator starts flashing

green, then stops flashing after about 60 seconds. If the STATUS

indicator lights green at this time, the lamp mode is set to “Eco”.

See E-28 and 49 for instructions on selecting.

POWER

STANDBY STATUS

Goes off

This

Blinking

green

(Approxi-

mately 60

seconds)

Lit green

Power is

This

indicator is

also lit

green in

Eco-mode.

indicator is

also lit

green in

Eco-mode.

Note:

While the POWER indicator is blinking, the power cannot be switched off.

Check that the POWER indicator is lit steadily, then switch off the power.

• If the power does not come on, see “When the STATUS Indicator is

Lit or Flashing” on Page E-55.

If the “Password” input window is displayed: See E-32.

A password is set for this projector.

The projector cannot be used unless the correct password is input.

To turn off the power: See E-23.

The projector is now capable of regular projection.

Note:

The image can be muted quickly by closing the lens cover while the image is being projected.

Switch on the power of the connected equipment

E-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Cable Connections and Switching the Power On/Off

When [Menu Language Select] is Displayed Upon Switching On the Power

The first time the power is switched on after purchase, [Menu Lan-

guage Select] will be displayed. Follow the procedure described be-

low and select the display language of the projector.

If the image is blurred, turn the focus ring counterclockwise or clock-

wise to focus it. See Page E-25.

Cursor

Press the SELECT (̆̄) buttons of the Remote con-

trol and align the deep blue cursor with [English].

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Press the ENTER button to set.

This will set the language and [Menu Language Select] will close.

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

This completes the selection of the display language.

Caution:

[Menu Language Select] will not appear the next time the power is switched on.

Should a change of language become necessary, see “Language” on Page E-51.

E-22

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Cable Connections and Switching the Power On/Off

Finishing

1 _{Switch off the power of the connected equip-}

ment

2 _{Switch off the power of the projector}

Press the POWER/STANDBY button.

POWER/

STANDBY

QUICK

POWER

COMPUTER

VIDEO

ENTER

(button on main unit)

CANCEL

The message display appears.

One more press of the POWER/STANDBY button as described in

the message will switch off the projection screen and cause the

projector to enter the power-off operation.

Note:

* The operation can be cancelled by pressing a button other than the

POWER/STANDBY button.

Press the STANDBY button again

to power off

The POWER indicator will change to a blinking green, then go off

about 90 seconds later, and the STANDBY indicator will light

steadily.

POWER

STANDBY STATUS

Blinking green

(Approximately 90

seconds)

Lit green

Standby

mode

3 _{Unplug the power cable}

When the Quick Off function is not used, check that the STANDBY indicator is lit and then unplug the power cable.

The STANDBY indicator will go off when the power cable is unplugged.

Note:

* When the power cable is disconnected from the power outlet, to provide cooling, the fan will start to turn again and cool the lamp.

(This is not a malfunction.)

* Do not put the projector into a bag or other enclosure while the cooling fan is turning.

ቢ Turn the lens cover counterclockwise until it stops.

ባ The lens cover will stop with a click.

Unplug & Go function

Even when the power cable is unplugged soon after switching off the power, the cooling fan (powered by the internal power

supply) will continue to turn and cool the lamp.

• It may be more difficult to turn the lamp back on if it has been cooled with the power cord unplugged.

• Do not place the projector in a bag, etc., while the cooling fan is turning.

E-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustment of the Projection Screen

Switch on the power of the connected equipment and make the adjustments with the video signal being input to the

projector.

Adjustment of the Projection Screen

Turn the zoom ring to adjust the screen size of the projection image.

Adjust the image to match the desired screen size. When outside of the adjustment range, move the projector to the rear or

forward.

Zoom ring

Adjust the projection image to the screen.

Check that the screen is set level and vertically.

(2)

(5)

(3)

(4)

(1)

(3)

(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of

the projector lens.)

(2) If the image is shifted vertically, move the image up or down with the front adjuster. See "Making Adjustments with the

Adjusters" on Page E-25.

(3) If the image is slanted, adjust by turning the right or left rear adjuster. See "Making Adjustments with the Adjusters" on

Page E-25.

(4) A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the

screen. Set the projector so that it is pointing straight toward the screen.

(5) The vertical keystone distortion of the projection screen will be corrected automatically. (Auto Keystone Function)

• An automatic adjustment will be made approximately 2 seconds after the projection angle has been fixed. When the

adjustment is completed, the [Auto Keystone Complete] message will be displayed for about 1.5 seconds.

To make fine adjustments after the automatic adjustment, see “Keystone Manual Adjustment” on Page E-29.

Auto Keystone Function

Keystone distortion arises when the projector is on a slant in the vertical orientation. This projector has an “Auto Keystone”

function that detects the vertical slanting and corrects it automatically.

This function is disabled when [Auto Keystone] of the on-screen menu is set to “OFF”. See “Auto Keystone” on Page E-47.

Conditions for Automatic Correction

• Automatic correction will operate in the range of 2 to 12 degrees in the upward direction, and 2 to 18 degrees in the downward

direction.

• Correction is performed only while the image is being projected.

Note:

Correction might not be possible when the screen surface is on a slant, or when the ambient temperature of the projector is extremely high

or low.

E-24

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustment of the Projection Screen

Turn the focus ring and adjust the focus of the screen

ABCD

Focus ring

Making Adjustments with the Adjusters

Raising the projection image

While viewing the projection image, (1) press and hold

the front adjuster buttons located at the left and right and,

(2) raise the projector to align the image with the screen,

then release your fingers.

M E N U

( )

T U S

S T

A N D B Y

S T

Q U I C K M E N U

P O W E R

Turn the left and right front adjusters for fine adjustment.

Adjust so that there is no shaking of the projector.

( )

Adjuster button

Lowering the projection image

Lower the front adjuster using the operation described

above.To lower the projection screen further, turn the rear

adjusters.

Fine adjustments are made by turning the rear adjusters.

Make adjustments so that there is no rattling.

Note:

When the projector has a rear installation is used, the orientation of the projection will need to be changed.

Please see “Vertical Flip / Horizontal Flip” on Page E-47.

E-25

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

This section describes the use of direct operation with the main unit or remote control buttons.

For information about operation using the menu, see “Menu Operation Method” on Page E-34 and the various items on

Pages E-41 to E-54.

Input Selection

This operation selects the input signal to be projected.

POWER

STANDBY STATUS

Main unit operation: Press the SOURCE button.

(It will not function while the menu or the quick menu is displayed.)

QUICK MENU

Each press of the SOURCE button on the main unit permits the selection of an

input source. Press the ENTER button to set the selected input source.

Applicable Model: KG-PS100S/KG-PS120X

Applicable Model: KG-PS125X

Remote control operation: Press the desired input selection button.

COMPUTER button ... Switches the Computer input.

VIDEO button............ The input switches between Video and S-Video each time the button

is pressed.

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

When Auto Source is On

When an input signal is not present at the selected source, the projector automati-

cally selects the next source that has an input signal.

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

When Auto Source is Off

The projector switches to the selected source regardless of whether an input sig-

nal is present.

Note:

* When you do not operate source selection, the projector will assume the input selec-

tion condition that was previously used.

* See “Auto Source” on Page E-48 for information about the Auto Source on and off

conditions.

Automatic Adjustment

This function automatically adjusts the position shift, screen size, vertical stripes,

and color infidelity of the projected analog RGB input signal.

Normally automatic adjustment is performed at the time of signal selection.

POWER

STANDBY STATUS

Main unit operation/Remote control operation: Press the AUTO button.

(This will not function while the menu or the quick menu is displayed.)

A press of the AUTO button starts the automatic adjustment.

QUICK MENU

Note:

* If the display position is shifted, vertical lines appear on the picture, or the projection

is not good even after using automatic adjustment, please perform image adjustment

manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page E-41.

* When the image extends beyond the boundaries of the screen or is smaller than the

screen, set “Aspect Ratio” to “Auto”. See “Selection of Aspect Ratio” on Page E-27

and “Aspect Ratio” on Page E-46.

POWER/

STANDBY

QUICK

COMPUTER

ENTER

VIDEO

FREEZE

VOL

CANCEL

QUICK

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

ZOOM

(KG-PS100S/KG-PS120X remote control)

E-26

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Selection of Aspect Ratio

This function selects horizontal and vertical picture proportions of the input

signal.

Note:

POWER/

STANDBY

QUICK

The KG-PS125X pro-

jector uses menu op-

erations to make this

selection. The content

of the operation is the

same. See “Aspect

Ratio” on Page E-46.

COMPUTER

VIDEO

ENTER

Press the ASPECT button while viewing the projected image and select the

aspect ratio.

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

Personal Computer Signal

Each press of the ASPECT button advances the selection one step in the se-

quence of Auto → Direct → Real, and then repeats.

ASPECT

AUTO

VOL

ZOOM

Auto ............ Automatically enlarges or reduces the image to project a full screen in a ratio

of 4:3

Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable

size

(KG-PS100S/

KG-PS120X

Real ............ Projects the input signal without pixel conversion.

remote control)

Input Signal

The setting is higher

Auto

Direct

Real

than the display reso-

lution of the projector.

The setting is lower

than the display reso-

lution of the projector.

Video Signals / Component Signals

Each press of the ASPECT button advances the selection one step in the sequence of Auto → Wide → Zoom, and then repeats.

Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top

and bottom of the 16:9 image becomes black.

Wide ........... Projects to fill the full width with the entire image at 16:9.

(This feature is used to project a squeezed image in a proper aspect ratio.)

Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.

(Portion that extend off screen is cut.)

Aspect ratio selection

4:3 screen

Auto

Wide

Zoom

16:9 screen

Note:

When selection has been made for the “Real” setting of the personal computer signal (i.e., when the input signal and the projector display

resolution are high) and the “Zoom” setting of the video signal, pressing the SELECT (̆̄̇̈) buttons on the remote control will permit

movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.

E-27

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Freezing a Moving Picture

This function is used to stop and view a moving picture. Note that the input

image continues to advance even though the picture there is a still picture

condition.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

A press of the FREEZE button changes the screen to a still picture. A

further press returns the screen to a moving picture.

Cancelling Video and Audio Temporarily

This function is used to cancel the video and audio at the same time.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

A press of the MUTE button will blank the picture and the sound, and

the screen will take on the background color that has been set.

Another press will cause a return to the original conditions.

VOL

ZOOM

Eco Mode

Use this if the picture is projected on a small screen and the picture

is too bright or when projecting images in dark rooms.

POWER

STANDBY STATUS

Pressing the ECO button will set the Eco mode.

On (STATUS indicator is lit green)

The lamp’s brightness is reduced to approximately 80%, extending the

STATUS indicator

lamp’s service life.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

Off (STATUS indicator is off)

The lamp brightness is set to 100% and the screen is bright.

ASPECT

AUTO

VOL

KSTN

ZOOM

Note:

Frequent switching this mode can degrade the lamp.

Quick Color Adj.

This function selects the preset color mode.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

* The preset color mode will differ depending on the input source.

VOL

ZOOM

Press the QUICK COLOR ADJ button and select the setting details with

the SELECT (̇ ̈) buttons.

Selection of the setting details can also be made with each press of the

QUICK COLOR ADJ button.

Input Source Color Mode

Standard ................... Selection of the standard (default setting).

Color priority ............ Selection of color priority.

Brightness priority .... Selection of brightness priority.

Blackboard mode...... Selects the optimum colors when the projection surface is a blackboard.

Custom ..................... Allows the selection and adjustment of the gamma, color temperature, and white level adjustment

items.

Computer

Wireless

Viewer

Standard ................... Selection of the standard (default setting).

Component

Video

S-Video

Movie mode.............. Selection of color priority best suited to movies.

Blackboard mode...... Selects the optimum colors when the projection surface is a blackboard.

Custom ..................... Allows the selection and adjustment of the gamma, color temperature, and white level adjustment

items.

Note:

When an item other than Custom is selected with Quick Color Adj., the gamma, color temperature, and white level adjustment items are

displayed in gray, and selection and adjustment are not possible.

E-28

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Keystone Manual Adjustment

Use this to adjust for trapezoidal (keystone) distortion of the pro-

jected image.The projector has both an automatic and a manual key-

stone adjustment function.The manual adjustment will be described

here.

(1)

Adjustment Method

(1) Press the (̆̄) buttons of the projector, or the (̆̄) KSTN but-

tons of the remote control and set the left and right sides so that

they are parallel.

The keystone adjustment display appears when one of the buttons is

pressed.

(Projector button)

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

(2)

(1)

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

Press the ̄ button.

Press the ̆ button.

ASPECT

AUTO

VOL

ZOOM

(2) To exit the display immediately, press the CANCEL button of the

remote control.

The display will close when there has not been an operation in about

10 seconds.

Note:

* Screen examples have been drawn in an exaggerated style for the purpose of description.

* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion

completely.

* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.

* See “Adjustment of the Projection Screen” on Page E-24 for information about the Auto Keystone function.

See “Auto Keystone” on Page E-47 for information about turning Auto Keystone ON and OFF.

Also see “Keystone” on Page E-47 for information about making manual adjustments using the on-screen menu.

* When Wireless Viewer is selected with model KG-PS125X, the keystone function will not operate with the main unit button.

Adjustment of the Volume

This function adjusts the volume of the built-in speaker.

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

(1) Press the ̆ or ̄ VOL button to adjust the volume.

The volume adjustment display appears when one of the buttons is

pressed.

ENTER

CANCEL

(2)

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

The ̆ button increases the volume and the ̄ button decreases the

volume.

(2) Press the CANCEL button to immediately close the display.

The display will close when there has not been an operation in about

10 seconds.

(1)

Note:

* Adjustment of the volume will not produce any sound unless an image is

being projected.

E-29

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Enlargement of the Image and Video Movement

This function digitally enlarges the personal computer image and video

image.

POWER/

STANDBY

QUICK

COMPUTER

VIDEO

ENTER

(2)

(3)

(1) Press the ZOOM button to enlarge the image.

CANCEL

The zoom display appears when the ZOOM button is pressed.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

(1)

VOL

ZOOM

Each press of the ̆ button enlarges the image and each press of the

̄ button makes the image smaller (returning it to 1:1).

Zoom

(No enlargement)

(Approximately 2 times enlargement)

(2) Pressing the SELECT (̆̄̇̈) buttons on the remote control at

the time of the zoom operation will cause the display position to

move.

(There will not be any movement when zoom is at 0.)

Zoom

(Approximately 2 times enlargement)

(Movement)

(3) Press the CANCEL button to immediately close the display.

The display will close when there has not been an operation in about

10 seconds.

Note:

After magnifying the image, be sure to use the ZOOM button to bring the gauge

value back to “0”.

The image can also be moved in the following circumstances.

•

When “Aspect Ratio” is set to “Real” by the signal of the personal computer, and the input resolution is

higher than the display resolution of the projector.

•

When “Aspect Ratio” is set to “Zoom” by the video signal.

Note:

* Zoom and image movement functions are cancelled when the input is switched.

* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected

so that they are not conspicuous.

* Movement of the screen will not be possible when the menu screen is being displayed.

E-30

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Protecting the Projector with the Security Lock

A password can be registered and the security lock set in order to protect the projector from unauthorized use.

Registering the password

The password is registered using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-34.

(1) Select “Security Lock” in the “Option” menu and set it to “Enable”.

The menu closes and the password registration display appears.

(2) Register using the (four) input buttons.

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

Be sure to input a 4-digit number.

Example: Registering the password “3221”

Supposing that the input buttons are substituted by number buttons, the

substitution will be:

ENTER

CANCEL

FREEZE button........................ “1”

MUTE button............................ “2”

ECO button .............................. “3”

QUICK COLOR ADJ button ..... “4”

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

Input buttons

VOL

ZOOM

(1) When input button “ECO” is pressed, an “ ” (asterisk) is entered for the

first digit.

Continuing, pressing the “MUTE” “MUTE” “FREEZE” input buttons will

enter asterisks in the remainder of the four digits.

(2) Input the password again. An “ ” appears when the input number

matches. If there is a mistake, the asterisks turn off. Start over from step

(1) above.

If the password matches, the password registration display closes.

Note:

To cancel the number you have input, press the CANCEL button.

The asterisks disappear and the display returns to the input standby mode at the first

place.

To cancel the password registration mode, press the CANCEL button again. The “Pass-

word” display turns off.

This completes password registration.

The “Password” input display appears the next time the power is turned

on.

Note:

The numbers you have input are not displayed. Be sure to write down the password

and store it in a safe place.

E-31

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

If the password input display appears when the power is turned on

When a password has been registered, the “Password” input window appears on the projected image when the power is turned

on. The projector continues projecting this image until the correct password is input. At this time, only the POWER/STANDBY

button (power off) works. Use the procedure described below to input the registered password. For instructions on registering the

password, see E-31.

Be sure to input the registered 4-digit number.

Example: To input the password “3221”

When input button “ECO”is pressed, an “ ” (asterisk) is entered for the first digit.

Continuing, pressing the “MUTE” “MUTE” “FREEZE” input buttons will enter as-

terisks in the remainder of the four digits.

If the password matches, the window turns off and the projector can be used

normally.

[Password input window]

Canceling the password/Changing the password

The password is canceled and changed using the menus.For instructions on operating the menus, see“Menu Operation Method”

on E-34.

Canceling the password

Select “Security Lock” in the “Option” menu and set it to “Disable”.

This clears the password and disables the security lock.

The password input display no longer appears when the power is turned on.

Changing the password

After setting “Security Lock” to “Disable” as described above, set it back to “En-

able”. The menu closes and the password registration display appears.

E-32

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operation

Using the Quick Menu

This function permits frequently used adjustments to be performed

quickly.

Note that the Quick Menu will not be displayed unless the signal of the con-

POWER

STANDBY STATUS

nected equipment is input. Please select the input that you wish to adjust.

QUICK MENU

Main unit operation

(1) Press the QUICK MENU button to display the quick adjustment display.

Further presses cause the adjustment display to change in sequence.

Press the SELECT ̆ or ̄ button to switch to the desired adjustment dis-

play.

(2) Press the SELECT ̇ or ̈ button to adjust.

(1)

(2)

Remote control operation

(1) A press of the QUICK MENU button brings up the quick adjustment

POWER/

STANDBY

QUICK

COMPUTER

VIDEO

ENTER

display.

(2)

(1)

(3)

Further presses cause the adjustment display to change in sequence.

The adjustment display can be selected with use of either the SELECT ̆ or

̄ button.

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

(2) Press the cursor ̇ or ̈ button to make the adjustment.

ASPECT

AUTO

VOL

ZOOM

(3) To close the display immediately, press the CANCEL button.

In the absence of operations for a period of about 10 seconds, the display

will close automatically.

Content of Adjustments and Settings

Example: Brightness adjustment display

Display Item

Adjustment/Setting

Brightness

Contrast

Adjusts the brightness of the image. See page E-41.

Adjusts the contrast of the image. See page E-41.

Keystone

Corrects (vertical) keystone distortion of the screen. See page E-47.

This function adjusts the volume of the built-in speaker. See page E-29.

Sets the time of the presentation timer. See page E-50.

Select the preset color mode. See page E-43.

Volume

Presentation timer

Quick Color Adj.

E-33

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

• This section describes only the menu operation method. Please see this item should you need information while

performing menu operations.

• For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-

tions.

• Adjustments and settings are made by projecting an image and adjusting to an optimum condition.

• The remote control should be pointed toward the remote control sensor of the projector and operated.

• To return the various items that have been changed via the menu to their standard values (i.e., default values at time

of shipping from the factory), see “Factory Default” on Page E-53. (Some items will not return to their initial values.)

• The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting

items that can be used with the input signal are displayed on the menu.

Names and Functions of Buttons Used for Menu Operations

(Remote Control)

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

MENU button

Used for menu display and menu closure.

ENTER

CANCEL

SELECT (̆̄̇̈) buttons

Used in the selection of menu names and item names as

well as in setting and adjusting the item contents.

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ENTER button

Used to enter settings.

ASPECT

AUTO

VOL

ZOOM

CANCEL button

Used to return to menu name selection as well as to close

the menu (and the sub menu display).

(Main Unit)

POWER

STANDBY STATUS

SELECT (̆̄̇̈) buttons

QUICK MENU

ENTER button

MENU button

Used to display menus, to return to menu name selections,

and to close menus (i.e., closing sub menu displays).

E-34

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Menu Screen Names and Functions

Menu Name

Cursor (Deep Blue)

This is the title of the menu.

There is a change to the title screen

when the menu is selected.

The cursor moves to the selected

menu name.

This permits setting/adjustment of the

item located at the cursor position.

Item Name

This is the name of the

adjustment or setting.

Icon: A press of the ENTER

button (the button on the

main unit) will display the sub

menu or the setting details.

Adjustment Bar and Settings Contents

Adjustment Bar: The increases and decreases in bar length

express the adjustment condition.

Setting Contents: Displays the contents that have been set.

Sub menu

Adjustment Bar

Item Name

Settings Contents

E-35

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Performing Menu Operations

• Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.

• The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.

• The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected

from the power outlet.

(Note that some items are not stored.)

Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input

the signal to the projector.

Select the input that you wish to adjust.

The menu display of the description diagram depicts an example in which the “Keystone” item name is selected.

Menu Display

Press the MENU button to display the menu

POWER/

STANDBY

COMPUTER

VIDEO

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

The menu name that existed when the menu was closed previously will be displayed.

Selection of the Menu Name

Press the SELECT (̇̈) button to select the menu name

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Each press of the SELECT ̈ button advances the selection one step in the sequence of “Color” → “View” → “Setup” →

“Option” → “Info.” → “Image”. Each press of the SELECT ̇ button causes a return of one step.

The cursor moves to the selected menu name.

Note:

Please check that the cursor of the item name has disappeared at the time of menu name selection.

Press the CANCEL button to make the cursor disappear.

E-36

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Displaying the Cursor

Press the SELECT ̄ button to display the item name selection cursor.

POWER/

STANDBY

COMPUTER

VIDEO

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

This condition al-

lows selection of the

item name.

ASPECT

AUTO

VOL

ZOOM

Selection of the Item Name

Press the SELECT (̆̄) button to align the cursor with the item name

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Items for which the Icon Is Displayed

Press the ENTER button to display the submenu.

Press the SELECT (̆̄) button and align the cursor with the desired item name.

There are also some items for which the setting display or the verification display will appear. Please see the various item

descriptions.

POWER/

STANDBY

COMPUTER

VIDEO

Sub menu

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Making Adjustments/Settings

Press the SELECT (̇̈) button and make the adjustment (or setting) while viewing the image

When a button is pressed, the image will also change.

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to

proceed in order.

Setting display: The setting contents display changes with each press of the button.

E-37

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Closing the Menu

Press the MENU button and close the menu display

POWER/

STANDBY

COMPUTER

VIDEO

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Selecting Another Menu Name with Remote Control Operation

When a sub menu is displayed, press the CANCEL but-

ton or the MENU button to close the sub menu.

Press the CANCEL button or the MENU button again to

delete the cursors of the various items.

POWER/

STANDBY

COMPUTER

VIDEO

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Press the SELECT (̇̈) button and select the menu

name.

(Menu names cannot be selected when the item name

cursor is displayed.)

POWER/

STANDBY

COMPUTER

VIDEO

QUICK

ENTER

CANCEL

QUICK

FREEZE

ECO

COLOR ADJ

MUTE

KSTN

ASPECT

AUTO

VOL

ZOOM

Note:

A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while

the quick menu is displayed will close the quick menu and display the menu.

E-38

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

List of Item Names Offering Input Selection and Adjustments/Settings

The item names that can be adjusted/set will differ depending on the input signal.

[Example of Menu Display Items at theTime of Input Signal Computer Selection]

Imput

Terminal

COMPUTER

Sub Menu

Item Name

Input Signal

Menu name

Image

Item Name

Reference

Compu

deoS-VideWoireleVsisewer

Component

Page

ࠗ

Brightness

Contrast

E-41

E-42

E-43

E-44

E-45

E-46

E-47

Color

ࠗ

Tint

Sharpness

Picture Adj.

Fine Picture

H Position

V Position

Reset

ࠗ

Color

View

Quick Color Adj.

Gamma

Color Temp.

White Level

Color Space

White Balance

Aspect Ratio

Filter

ࠗ

Vertical Flip

Horizontal Flip

Keystone

Auto Keystone

* “Tint” can be adjusted only in the NTSC system composite/S signal input mode, or in the component signal input mode.

E-39

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Imput

Terminal

COMPUTER

Sub Menu

Item Name

Input Signal

Menu name

Setup

Item Name

Reference

Compu

deoS-VideWoireleVsisewer

Component

Page

ࠗ

Auto Source

Auto Power Off

Menu Position

Eco Mode

E-48

E-49

Input Format

Computer

Video

E-49

E-50

E-51

E-52

E-53

E-54

S-Video

Presentation Timer

Volume

Option

Language

On Screen

Background

Startup Screen

Security Lock

Network Password

Status

Info.

Factory Default

Lamp Timer Reset

Resolution

Frequency

Lamp Timer

E-40

Download from Www.Somanuals.com. All Manuals Search And Download.

Image

• Perform this operation while projecting the picture for which the adjustment/setting will be made.

• Select the menu name “Image”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.

Brightness / Contrast / Color / Tint / Sharpness

Picture qualities such as brightness and contrast will change depend-

ing on the whether the room is bright or dark. Please adjust to suit your

preference.

Select the desired item name and then adjust with the SELECT (̇̈) buttons.

ᮣ

SELECT Button

Brighter

More contrast

Denser color

More green

ᮤ

SELECT Button

Item Name

Brightness

Contrast

Color

Darker

Less contrast

Less dense color

More red

Tint

Sharper image

Sharpness

Softer image

Note:

* The adjustment values of the adjustable items are stored according to input source.

* “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or

component signals.

Picture Adj. / Fine Picture / H Position / V Position

Usually, automatic adjustment is performed at the time of signal selec-

tion, but when automatic adjustment is not effective, these adjustments

can be performed.

Note:

When the image extends beyond the boundaries of the screen or is smaller than the

→

screen, check that the “View”

“Aspect Ratio” setting is set to “Auto”. See “As-

pect Ratio” on Page E-46.

Picture Adj. (Picture Adjustment)

Adjust this when bright and dark vertical bands appear on the screen.

Select the “Picture Adj.” item name and adjust with the SELECT (̇̈) buttons

so that the vertical bands disappear and brightness becomes uniform across

the screen.

E-41

Download from Www.Somanuals.com. All Manuals Search And Download.

Image

Fine Picture

Adjust this when the picture shows a lack of color fidelity or flickering.

Select the “Fine Picture” item name and adjust with the SELECT (̇̈) but-

tons so that the lack of color fidelity or the flickering disappears.

H Position

Adjust this when the picture is shifted to the left or right.

Select the “H Position” item name and adjust with the SELECT (̇̈) buttons.

V Position

Adjust this when the picture is shifted up or down.

Select the “V Position” item name and adjust with the SELECT (̇̈) buttons.

Reset

This function resets (i.e., returns to the standard settings) the adjust-

ment/setting value of the “Image” menu name.

A press of the ENTER button forces the reset.

Note:

* The item name “Fine Picture” at the time of RGB input will not be reset.

* “Reset” of the menu name “Image” can be reset for each input source.

* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default”

on Page E-53.

E-42

Download from Www.Somanuals.com. All Manuals Search And Download.

Color

• Do the following operation while displaying the image you want to adjust or set.

• Select the menu name “Color”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages

E-39.

Quick Color Adj.

This function selects the preset color mode.

* The preset color mode will differ depending on the input source.

Press the QUICK COLOR ADJ button and select the setting details with the

SELECT (̇ ̈) buttons.

Selection of the setting details can also be made with each press of the QUICK

COLOR ADJ button.

Input Source Color Mode

Standard ................... Selection of the standard (default setting).

Color priority ............ Selection of color priority.

Brightness priority .... Selection of brightness priority.

Blackboard mode...... Selects the optimum colors when the projection surface is a blackboard.

Custom ..................... Allows the selection and adjustment of the gamma, color temperature, and white level adjustment

items.

Computer

Wireless

Viewer

Standard ................... Selection of the standard (default setting).

Component

Video

S-Video

Movie mode.............. Selection of color priority best suited to movies.

Blackboard mode...... Selects the optimum colors when the projection surface is a blackboard.

Custom ..................... Allows the selection and adjustment of the gamma, color temperature, and white level adjustment

items.

Note:

When an item other than Custom is selected with Quick Color Adj., the gamma,

color temperature, and white level adjustment items are displayed in gray, and se-

lection and adjustment are not possible.

Gamma

Gamma corrects the proportion of change of the dark portions from the

bright portions of the input signal.

Set this to reproduce natural color tone or to distinctly project a per-

sonal computer picture in a bright conference room.

Select the“Gamma”item name and select the setting contents with the SELECT

(̇̈) buttons.

Normal ....... Correction with standard settings

Natural ........ Corrects for natural color tones

Real ............ Corrects with emphasis on brightness

Note:

When an item other than Custom is selected with Quick Color Adj., the gamma,

color temperature, and white level adjustment items are displayed in gray, and se-

lection and adjustment are not possible.

E-43

Download from Www.Somanuals.com. All Manuals Search And Download.

Color

Color Temp.

The screen color is affected by the color of the illumination and other

extraneous light.

This function adjusts the white, which is the reference color for video

equipment, and improves the quality of color reproduction. Adjustment

can also be used to enhance skin colors.

Select the item name “Color Temp.” and select the setting contents with the

SELECT (̇̈) buttons.

Low ............ Produces warm whites (reddish)

Medium ...... Produces warm whites (yellowish)

Normal ....... Produces the white of sunlight

High ............ Produces cool whites (bluish)

Note:

When an item other than Custom is selected with Quick Color Adj., the gamma,

color temperature, and white level adjustment items are displayed in gray, and se-

lection and adjustment are not possible.

White Level

When projecting, this function is used to emphasize the whites of text or

diagrams on the personal computer.

Select the item name “White Level” and use the SELECT (̇̈) buttons to

select the setting contents.

Select the desired degree of white level from among “Low”, “Medium”, and

“High”.

Note:

When an item other than Custom is selected with Quick Color Adj., the gamma,

color temperature, and white level adjustment items are displayed in gray, and se-

lection and adjustment are not possible.

Color Space

Set this function when a component signal (YPbPr) is projected and the

image is extremely red or extremely green.

Select the item name “Color Space” and use the SELECT (̇̈) buttons to

select a color space setting that provides a normal image.

Selection contents at the time ofYPbPr input

BT.709, SMPTE240

Note:

* When the component signal undergoes conversion processing to red, green,

and blue which express the image of the projector, the correct color cannot be

reproduced unless a system compliant with the color difference conversion sys-

tem of the input signal is used. Color Space serves to make this selection.

* The color space can only be adjusted with high definition TVs.

E-44

Download from Www.Somanuals.com. All Manuals Search And Download.

Color

White Balance

This function automatically adjusts the black level and the white level of

the Computer input signal to suit the personal computer.

Select the item name [White Balance] and press the ENTER button.

The display will change to [Input Black Signal].

The screen background color of the connected personal computer

will be set to black.

3. Press the ENTER button.The display will change to [Adjusting Black]

and the black level will be adjusted.

The adjustment of the black level is completed and the display

changes to [Input White Signal].

The screen background color of the connected personal computer

will be set to white.

Press the ENTER button.The display will change to [AdjustingWhite]

and the white level will be adjusted.

[White balance complete] is displayed for a while and the adjustment is

completed.

E-45

Download from Www.Somanuals.com. All Manuals Search And Download.

View

• Perform this operation while projecting the picture for which the adjustment/setting will be made.

• Select the menu name “View”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.

Aspect Ratio

This function sets the horizontal and vertical picture proportions of the

input signal.

Select the item name “Aspect Ratio” and select the setting contents with the

SELECT (̇̈) buttons.

Personal Computer Signal

Auto ............ Automatically enlarges or reduces the image to project a full screen in a

ratio of 4:3

Direct .......... Maintains the aspect ratio and projects a picture of the maximum

displayable size

Real ............ Projects the input signal without pixel conversion

Video Signals

Auto ............ While maintaining the aspect ratio, projects a full screen so that no por-

tions extend beyond the boundaries of the screen. The top and bottom of

the 16:9 image becomes black.

Wide ........... Projects to fill the full width with the entire image at 16:9.

(This feature is used to project a squeezed image in a proper aspect ra-

tio.)

Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.

(Portion that extend off screen is cut.)

See “Selection of Aspect Ratio”on Page E-27 for diagrams of projection screen

images that correspond to the input signals.

Note:

Please note that using this monitor for the purpose of commercial gain or the at-

traction of public attention in a venue such as a coffee shop or hotel and projecting

a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image

raises concern about the infringement of the copyright holder’s rights which are

protected by copyright law.

Filter

This function sets the sharpness when the input signal is adjusted to

the resolution of the projector and enlarged or reduced.

Select the item name “Filter” and select the setting contents with the SELECT

(̇̈) buttons.

Smaller numerical values result in a sharper picture and larger values result in

a softer picture. Please select your desired setting value.

E-46

Download from Www.Somanuals.com. All Manuals Search And Download.

View

Vertical Flip / Horizontal Flip

In selecting the method of projecting to the screen, these functions are

set when the projector is in a rear screen installation.

Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting

contents with the SELECT (̇̈) buttons.

“Vertical Flip” Off

“Vertical Flip” On

“Horizontal Flip” Off

“Horizontal Flip” On

“Horizontal Flip” Off

Keystone

Keystone distortion will occur when the projector and screen are on an

angle (in the vertical orientation).The Keystone function is used to manu-

ally adjust this distortion.

Select the item name “Keystone” and correct the keystone distortion using the

SELECT (̇ ̈) buttons.

Press the ̇ button.

Press the ̈ button.

Note:

* The menus and other on-screen displays cannot be adjusted.

* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion

completely.

* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.

* See “Adjustment of the Projection Screen” on Page E-24 for information about the Auto Keystone function.

See “Keystone Manual Adjustment” on Page E-29 for information about manual adjustment using the projector and the remote control.

Auto Keystone

Auto Keystone is set to provide an automatic adjustment of the key-

stone distortion.

Select the item name “Auto Keystone”and set with the SELECT (̇̈) buttons.

On............... provides automatic adjustment.

Off .............. does not provide automatic adjustment.

Note:

See “Adjustment of the Projection Screen” on Page E-24 for information about the Auto Keystone function.

See “Manual Adjustment of Keystone” and the aforementioned “Keystone” on Page E-29 for information about manual adjustment using the

buttons of the projector and the remote control.

E-47

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

• Select menu name “Setup”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.

Auto Source

The Auto Source function automatically detects the input signal when

the power supply is switched on and when the input is switched.

Select the item name “Auto Source” and select the setting contents with the

SELECT (̇̈) buttons.

On............... Switches on the automatic detection function

Off .............. Switches off the automatic detection function

Applicable Model: KG-PS125X

Signal Detection Order When On

The sequence of Computer → Video → S-Video → Wireless → Viewer is

searched repeatedly.

When a signal is detected, the search is stopped and the image is projected.

Auto Power Off

This function switches off the projector power automatically when the

input of the projector enters a no-signal condition.

Select item name “Auto Power Off” and select the setting contents with the

SELECT (̇̈) buttons.

On............... The power is switched off when there is no signal.

Off .............. The power is not switch off even when there is no signal.

Operation when Function is On

• The “No Signal Power Off” display appears when a no-signal condition con-

tinues for approximately 10 seconds. The power is switched off about 5

minutes after this.

• If a signal is input during the appearance of the display and an operation

button other than the POWER/STANDBY button is pressed, the display is

closed and the function is cancelled.

Note:

Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being

input to the projector and Auto Power Off is not activated.

Menu Position

This function sets the display position of the menu.

Select item name “Menu Position” and select the setting contents with the

SELECT (̇̈) buttons.

............. Displays on the left side

............. Displays on the right side

E-48

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

Eco Mode

Use this if the picture is projected on a small screen and the picture is

too bright or when projecting images in dark rooms.

Select the item name “Eco Mode” and select the setting contents with the

SELECT (̇̈) buttons.

On............... The lamp’s brightness is reduced to approximately 80%, extending the

lamp’s service life.

(STATUS indicator is green)

Off .............. The lamp brightness is set to 100% and the screen is bright.

(STATUS indicator is off)

POWER

STANDBY STATUS

Note:

Frequent switching this mode can degrade the lamp.

STATUS indicator

Input Format

This function is used in setting the input signals of the input connec-

tors.

Normally, this should be set to Auto.When identification is not possible

with Auto, make the setting.

Select the item name “Input Format”, press the ENTER button, and the sub

menu will open.

Select the connector that is to be changed, and select the setting contents

with the SELECT (̇̈) buttons.

[Computer]

This is the signal setting for the COMPUTER IN con-

nector.

Auto ............ Automatically identifies the signal.

Computer ... Analog RGB signal is set.

Component . Component signal is set.

[Video] and [S-Video]

[Video] is the color system setting for the VIDEO connector and [S-Video] is

the color system setting for the S-VIDEO connector.

Auto ............ Automatic identification.

NTSC .......... Fixed to the NTSC system.

PAL ............. Fixed to the PAL system.

SECAM ....... Fixed to the SECAM system.

NTSC 4.43 .. Fixed to the NTSC 4.43 system.

PAL M ......... Fixed to the PAL M system.

PAL N ......... Fixed to the PAL N system.

PAL 60 ........ Fixed to the PAL 60 system.

E-49

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

Presentation Timer

The presentation is given while checking the timer displayed on the

screen.

The gauge display allows the remaining time to be known at a glance.

Select the item name “Presentation Timer” and select the setting contents

with the SELECT (̇̈) buttons.

Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.

To start the timer...

Press the MENU button and open the menu.

The timer display will appear at the lower right and the timer will start.

Gauge (Blue)

[Timer Display]

The blue gauge indicates the remaining time.When the gauge disappears,the

time is up.

The gauge continues to be displayed when the timer is stopped.

When the remaining time is

“0” (Gray)

• Press the ENTER button to restart the timer. The timer will start with the

same time setting.

• Press the CANCEL button to close the timer display. The timer setting will

return to “Off”.

Moving the Position of the Timer Display

The SELECT (̆̄̇̈) buttons on the remote control permit movement within

the movable range of the timer display.

Movable Range of the Timer Display

Note:

* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will

still be operating at such times. Also, the timer will not be displayed unless a signal is being input.

* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.

Volume

This function adjusts the volume of the built-in speaker.

Select the item name [Volume] and adjust the sound level with the SELECT

(̇̈) buttons.

E-50

Download from Www.Somanuals.com. All Manuals Search And Download.

Option

• Select menu name “Option”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.

Language

This function sets the language that is displayed on screen in

the messages and menu displays.

Select item name “Language” and press the ENTER button to open

the Language sub menu.

Select the language with the SELECT (̆̄) buttons.

On Screen

This function switches on/off the messages displayed with a black

frame such as the input signal information and the aspect ratio.

Select item name “On Screen” and select the setting contents with the

SELECT (̇̈) buttons.

On............... The message is displayed.

Off .............. The message is not displayed.

Note:

Even when set to off, messages that are not in a black frame will be dis-

played.

Freeze

Example of a display when the

FREEZE button is pressed

Background

This function sets the screen color when the input source is no-

signal.

Select item name “Background” and select the setting contents with

the SELECT (̇̈) buttons.

Blue ............ Sets a blue screen when there is no signal

Black........... Sets a black screen when there is no signal

E-51

Download from Www.Somanuals.com. All Manuals Search And Download.

Option

Startup Screen

This is the selection of whether or not to display the logo screen

at startup time.

Select item name “Startup Screen” and select the setting contents

with the SELECT (̇̈) buttons.

Logo ........... Displays the logo.

Blank .......... Does not display the logo.

Note:

When “Logo” is selected at the startup screen, the “TAXAN” logo is dis-

played.

Security Lock

A password can be registered and the security lock set in order

to prevent unauthorized use of the projector.

For instructions on using the security function, see “Protecting the

Projector with the Security Lock” on E-31.

Select item name “Security Lock” and select the setting contents with

the SELECT (̇̈) buttons.

Disable ....... The security lock is disabled.

The projector can be operated without inputting the password.

Enable......... The security lock is enabled.

The security lock is activated when the power is turned on, and

the password must be input in order to operate the projector.

Network Password

Applicable Model: KG-PS125X

For details, refer to the “Image Viewer / Wireless Network” sec-

tion.

E-52

Download from Www.Somanuals.com. All Manuals Search And Download.

Info.

• Select menu name “Info.”.

See “Menu Operation Method” on Page E-34 for information about performing menu operations. The item name display will

differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-39.

Status

This displays information about the equipment.

Select item name “Status” and press the ENTER button.

There is a change to the status display.

Press the CANCEL button to return to the menu.

Display Contents:

Projector model, firmware version, and the internet home page ad-

dress of KAGA COMPONENTS.

Factory Default

This function returns the adjustments and settings of all the in-

put sources to the standard factory default values.

Select item name “Factory Default” and press the ENTER button.

There is a change to the display [Press “ENTER” to Factory Default

Set].

Press the ENTER button to initialize.

To cancel, press the CANCEL button and there will be a return to the

menu.

Items that are not set to the factory default:

Vertical Flip / Horizontal Flip, Language and Lamp Timer and Security

Lock.

Lamp Timer Reset

This function resets the lamp timer. Be sure to perform the reset

operation when the lamp cartridge has been replaced.

Select item name “Lamp Timer Reset” and press the ENTER button.

There is a change to the display “Press “ENTER” to Lamp Timer Re-

set”.

Press the ENTER button to initialize.

To cancel, press the CANCEL button and there will be a return to the

menu.

E-53

Download from Www.Somanuals.com. All Manuals Search And Download.

Info.

Resolution / Frequency

This function displays the resolution and frequency of the detected in-

put signal.

Lamp Timer

This displays the lamp timer.

This projector has an Eco mode function. The lamp life will differ between

Normal mode and Eco mode.

Lamp Life

Use only in Normal mode: approx. 2000 hours

Use only in Eco mode: approx. 3000 hours

* Lamp life will differ when there has been switching between the modes.

• When Lamp Life Has Been Reached

“Replace the Lamp Cartridge” is displayed on the screen for 10 seconds in

a 1-minute interval.

Please replace the lamp with a new one.

See “Replacing the Lamp Cartridge” on Page E-58 for information about

lamp cartridge replacement.

• When Over 100 Hours Have Elapsed Since Reaching Lamp Life

(Including Eco Mode)

[Warning!! System Shutdown] is displayed for 10 seconds and the power is

switched off. Pressing the POWER/STANDBY button under this condition

will not switch on the power. Please replace the lamp cartridge.

E-54

Download from Www.Somanuals.com. All Manuals Search And Download.

When an Indicator is Lit or Flashing

The indicators on the projector’s control panel light or flash to

notify of problems, as described below.

POWER

indicator

STANDBY

indicator

STATUS

indicator

An indicator is also used to notify you of the currently set power

mode. See“Power Cable Connections and Switching the Power

On/Off” on page E-21.

TAT

ANDBY

POWER

K MENU

Indicator status

What you should do

When the power is on (Lit green)

Lit red

It is time to replace the lamp.

Replace with a new lamp cartridge.

POWER

STANDBY STATUS

Standby mode (Lit green)

The lamp has reached the end of its service life. The power

will no longer turn on.

The projector can be used for 100 hours after the lamp has reached

POWER

STANDBY STATUS

Lit red

Blinks green for 60 seconds (then,

lit green)

the end of its service life.

Replace with a new lamp cartridge.

POWER

The lamp cover is open.

The lamp cover is not properly mounted. Mount it properly.

Blinks red

(1 second on/1 second off)

STANDBY STATUS

Lit green

The temperature is abnormally high.

• The temperature protector has been activated. If the room tem-

perature is high, move the projector to a cool place. If the

projector’s internal temperature is high, check the cooling fan’s

ventilation slots and clean them if they are clogged.

• When the temperature protector is activated, the power turns

off and in some cases will not turn back on immediately. In this

case wait about 90 seconds, then try again.

POWER

Blinks red

(0.5 seconds on/0.5 seconds off)

STANDBY STATUS

Lit green

POWER

The fan has stopped.

STANDBY STATUS

Unplug the power cable and contact a store that sells the KG-

PS100S/KG-PS120X/KG-PS125X for repairs.

Blinks red

(0.5 seconds on/0.5 seconds off)

Lit green

The lamp will not light.

POWER

STANDBY STATUS

Blinks red quickly

(0.1 seconds on/0.1 seconds off)

Wait at least 90 seconds, then turn the power back on.If the prob-

lem persists, unplug the power cable and contact a store that sells

the KG-PS100S/KG-PS120X/KG-PS125X for repairs.

Lit green

Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power

cable and contact your store of purchase.

Thermal Protector

If the temperature within the projector becomes abnormally high, the thermal protector will be activated and will switch off the

power of the projector.

Should this happen, please take the following actions.

1. Switch off the power and disconnect the power plug from the wall outlet.

2. Check the following matters and take the required measures.

When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the

outflow and intake holes and clean them if they are obstructed.

3. Wait about 60 minutes until the temperature of the projector drops.

If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.

E-55

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following matters before requesting servicing.

Reference

Page

Problem

Check

• Is the power cord plugged into a power outlet?

Power does not turn on

E-21

E-60

E-55

• Is the lamp cover properly mounted?

• Is the projector’s temperature high? To protect the projector, the power can-

not be turned on when the projector’s temperature is abnormally high.

• Has the lamp reached the end of its service life?

• Depending on the timing with which the power cord is plugged in (the power

is turned on), it may happen that the POWER indicator (LED) does not light

and the power does not turn on. This is not a malfunction. If this happens,

unplug the power cord then plug it back in.

E-55

—

• Is a connected input selected?

No image is produced

E-26

E-16–19

E-54

• Is the cable properly connected to the input terminal?

• When a computer is connected, are signals being output from the computer?

• Does the signal being input have a frequency usable with this projector?

• Are the brightness and contrast adjusted to the minimum?

• Is the STATUS indicator lit a steady red or flashing red?

• When the component signal of the DVD player is connected with the COM-

PUTER IN connector and the image is not output, is [Input Settings] of the

COMPUTER IN connector properly selected?

E-64

E-41

E-55

E-50

• For a Computer input, has the picture been properly adjusted?

E-41, 42

• Is the projector properly installed?

Image is distorted

E-25

E-29, 47

• For trapezoidal (keystone) distortion, perform keystone adjustment.

Please note that depending on the projected picture and the projection con-

ditions, it may not be possible to eliminate keystone distortion completely.

• Is the lens properly focused?

Image is out of focus

E-24

E-15

—

• Are the screen and projector installed at the proper distance?

• Does the projection distance exceed the focusing range?

• Is there condensation on the lens, etc.?

If the projector is moved from a cool storage area to a warm place and the

power is turned on, condensation may form on the lens or internal optical

parts. If this happens, wait until the condensation has evaporated before

using the projector.

• For a computer input, are the horizontal and vertical positions properly ad-

Image is not in proper posi-

tion and is not displayed

properly

E-42

E-64

justed?

• Does the input signal have a compatible resolution and frequency? Check

the computer’s resolution.

• If the image is crushed in the horizontal or vertical direction or if it is not

displayed over the entire screen, select a different aspect ratio.

Video image is crushed

E-27

• When a component signal is being input, is the color space setting proper?

• For a composite input, is the tint properly adjusted?

Colors of the overall image

are strange

E-44

E-41

• From the menu, select “Image”and adjust the “Picture Adj.”and “Fine Picture”.

Characters flicker or colors

are offset for RGB inputs

E-41, 42

• Other than [Settings], [Option] and [Information], selection will not be pos-

sible unless a signal is being input to the projector and the image/picture is

projected.

Cannot select the menu

name

—

• Are the remote control unit’s batteries worn? Replace with new batteries.

• Is there an obstacle between the remote control unit and the projector’s

remote control signal sensor?

Remote control unit does

not operate

E-13

• Is the remote control unit outside of range?

E-13

• Are you pointing the remote control unit’s transmitter towards the projector’s

remote control signal sensor?

• Is the projector located near fluorescent lighting?

E-13

E-55

• See “When an indicator is lit or flashing”.

STATUS indicator is lit red

or flashing red

E-56

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning

• Be certain to disconnect the power plug from the power outlet before cleaning.

• Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber

or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the

coatings may peel, etc.

Cleaning a Soiled Projector Main Unit

• Wipe with a lint-free, soft, dry cloth.

When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a

chemically-treated cloth is going to be used, please follow any written warnings.

• Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings

may peel, etc.

• When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.

Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

• Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.

Dirty Lens

• Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning

paper for eye glasses. Be careful not to scratch the lens at this time.

Dust of the Intake and Outflow Holes

Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which

could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.

• Switch off the power, check that the STANDBY indicator has

changed to a steadily lit green, then unplug the power cable.

• Clean out the holes from the outside using a vacuum cleaner.

Use the brush adapter of the vacuum cleaner to do this. Avoid

using the vacuum directly without attaching the adapter as well

as the use of a nozzle adapter.

ICK

Cleaning the Inside of the Projector

Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected

inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact

your dealer.

E-57

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacing the Lamp Cartridge

• The lamp that is used as a light source in the projector has a limited service life.The rated service life of the lamp is

about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and

other factors.

Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp

means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from

test conditions at this company.)

• When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp

Cartridge] is displayed on the screen.When this occurs, it is time to replace the lamp cartridge. Follow the procedure

described on Pages E-59 and E-60 and replace the lamp cartridge.

• If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode

and no longer turns on.

• Contact a store that sells the KG-PS100S/KG-PS120X/KG-PS125X for a replacement lamp. Indicate you need a KG-

LPS1230 replacement lamp for the KG-PS100S/KG-PS120X/KG-PS125X (order code 000-155).

CAUTION

• Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop,

disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before

replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will

cause burns because of the high temperature.

• Do not remove any screws other than those specified.

• Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.

• If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can

be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may

cause injury. If this happens, contact your dealer or the store the projector was purchased.

E-58

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacing the Lamp Cartridge

Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to

replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.

1 _{Unplug the power cord.}

2 _{Turn the projector upside-down.}

3 _{Remove the lamp cover.}

(1) Loosen the lamp cover locking screw by turning it counter-

clockwise until it turns freely. (The screw will not come out.)

(2) Pull in the direction of the arrow and remove.

4 _{Remove the lamp cartridge.}

(1) Loosen the 2 screws of the lamp cartridge by turning them

counterclockwise until they turn freely. (The screws will not

come out.)

(2) Grasp the handles of the lamp cartridge and pull upward to

remove the cartridge.

E-59

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacing the Lamp Cartridge

5 _{Mount the new lamp cartridge.}

(1) Slowly push in the lamp cartridge. (Align it with the screw

holes of the main unit.)

(2) Firmly press down on the specified location, then tighten

the 2 screws of the lamp cartridge by turning them clock-

wise.

6 _{Mount the lamp cover.}

(1) Insert the edge of the lamp cover into the main unit, then

close the lamp cover.

(2) Tighten the screw of the lamp cover by turning it clockwise.

7 _{Reset the Lamp Timer.}

Connect the power cable, switch on the power, and then reset.

Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization

verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-53.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should

this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for

more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the KG-PS100S/KG-PS120X/KG-PS125X for a replacement lamp. Indicate you need a KG-LPS1230 replacement

lamp for the KG-PS100S/KG-PS120X/KG-PS125X (order code 000-155).

E-60

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Model

KG-PS100S

Optical

Method of projection :

DLP^®chip

DLP^®(single DLP^®chip)

0.55 inches 800

600 dots

Lamp

230 W high pressure mercury lamp

Projection lens :

Image size

Manual zoom (

1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm

Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet telephoto)

Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)

Standard mode: 2500 lm

Light Output

Contrast Ratio

2000:1 (Full on/off)

Electrical

Inputs

Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,

576p, 1080i, 720p)): (automatic or manual switching)

RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)

Full color (16,770,000 colors)

VGA (640

480) expansion/true, S-VGA (800

600) true

XGA (1024

768) compression

Color Reproduction

Resolution

Input Current

2.8 A

Power Requirement

Power Consumption

100 - 240 V AC, 50/60 Hz

280 watts (240 watts in eco mode)

Mechanical

Dimensions Excluding Stand 195 mm (W)

58 mm (H)

262 mm (D) (when stored, not including projecting parts)

7.7 in.(W)

2.3 in.(H)

10.3 in.(D) (when stored, not including projecting parts)

Weight

Approximately 1.8 kg / 4.0 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

• Specifications and design are subject to change without notice.

E-61

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Model

KG-PS120X

Optical

Method of projection :

DLP^®chip

DLP^®(single DLP^®chip)

0.55 inches 1024

768 dots

Lamp

230 W high pressure mercury lamp

Projection lens :

Image size

Manual zoom (

1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm

Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet telephoto)

Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)

Standard mode: 2500 lm

Light Output

Contrast Ratio

2000:1 (Full on/off)

Electrical

Inputs

Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,

576p, 1080i, 720p)): (automatic or manual switching)

RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)

Full color (16,770,000 colors)

VGA (640

480) expansion/true, S-VGA (800

600) expansion/true

XGA (1024

768) true, S-XGA (1280

1024) compression

2.8 A

Color Reproduction

Resolution

Input Current

Power Requirement

Power Consumption

100 - 240 V AC, 50/60 Hz

280 watts (240 watts in eco mode)

Mechanical

Dimensions Excluding Stand 195 mm (W)

58 mm (H)

262 mm (D) (when stored, not including projecting parts)

7.7 in.(W)

2.3 in.(H)

10.3 in.(D) (when stored, not including projecting parts)

Weight

Approximately 1.8 kg / 4.0 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

• Specifications and design are subject to change without notice.

E-62

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Model

KG-PS125X

Optical

Method of projection :

DLP^®chip

DLP^®(single DLP^®chip)

0.55 inches 1024

768 dots

Lamp

230 W high pressure mercury lamp

Projection lens :

Image size

Manual zoom (

1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm

Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet telephoto)

Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)

Standard mode: 2500 lm

Light Output

Contrast Ratio

2000:1 (Full on/off)

Electrical

Inputs

Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,

576p, 1080i, 720p)): (automatic or manual switching)

RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)

Full color (16,770,000 colors)

VGA (640

480) expansion/true, S-VGA (800

600) expansion/true

XGA (1024

768) true, S-XGA (1280

1024) compression

3.0 A

Color Reproduction

Resolution

Input Current

Power Requirement

Power Consumption

100 - 240 V AC, 50/60 Hz

300 watts (260 watts in eco mode)

Mechanical

Dimensions Excluding Stand 195 mm (W)

58 mm (H)

262 mm (D) (when stored, not including projecting parts)

7.7 in.(W)

2.3 in.(H)

10.3 in.(D) (when stored, not including projecting parts)

Weight

Approximately 1.8 kg / 4.0 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

• Specifications and design are subject to change without notice.

E-63

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Supported Frequency

The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table

below.

Manual adjustments may be required for some input signals. See “Picture Adj. / Fine Picture / H Position / V Position” on page

E-41, 42.

Frequency

Signal

Resolution

Video Component Digital Analog

Horizonral (kHz)

Vertical (Hz)

ࠗ

15.734

15.625

31.5

37.9

31.5

37.9

37.5

43.3

35.2

37.9

46.9

48.1

53.7

48.4

56.5

60.0

68.7

64.0

35.0

49.7

60.2

68.7

33.8

28.1

45.0

31.3

31.5

31.3

31.5

60.0

50.0

70.1

70.0

85.1

85.0

60.0

72.8

75.0

85.0

56.3

60.3

75.0

72.2

85.1

60.0

70.1

75.0

85.0

60.0

66.7

74.5

74.9

75.1

60.0

50.0

60.0

50.0

60.0

50.0

60.0

VIDEO(NTSC)

VIDEO(PAL/SECAM)

PC/AT

640

350

640

400

720

350

720

400

640

350

640

400

720

400

640

480

640

480

640

480

640

480

800

600

800

600

800

600

800

600

800

600

1024

768

1024

768

1024

768

1024

768

1280

1024

640

480

823

624

1024

768

1152

870

1920

1080

1920

1080

1280

720

576

720

480

720

576

720

480

VESA

Apple Macintosh

HDTV (1080i)

(720p)

EDTV (576p)

(480p)

SDTV

(576i)

(480i)

* The model name for XGA is KG-PS120X/KG-PS125X and SVGA is KG-PS100S.

* The projector does not support the ADC connector on Apple Macintosh.

ࠗ

: Supported frequency

: Not supported frequency

KG-PS120X/KG-PS125X

The display resolution is 1024

768 dots.When displaying a signal with resolutions other than 1024

768 dots such as 1280

1024,

sizes of characters or lines may be uneven.

KG-PS100S

The display resolution is 800

600 dots.When displaying a signal with resolutions other than 800

600 dots such as 1024

768,

sizes of characters or lines may be uneven.

E-64

Download from Www.Somanuals.com. All Manuals Search And Download.

Cabinet Dimensions

Q U I C K M E N U

M E N U

T U A S S T

A N S D T B Y

P O W E R

195 (7.7)

Unit: mm (inch)

E-65

Download from Www.Somanuals.com. All Manuals Search And Download.

2007, KAGA COMPONENTS CO., LTD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Home Theater System HTS3156 User Manual
Philips Indoor Furnishings 22AV3200 User Manual
Philips Portable DVD Player PET100 12 User Manual
Pinnacle Design TV Video Accessories TR65 User Manual
Pioneer Car Stereo System DEH P3100UB User Manual
Pioneer CD Player DEH P3800MP User Manual
Planar Computer Monitor PT1503Z User Manual
PLUS Vision Projector U5 232 User Manual
Poulan Lawn Mower 178493 User Manual
PYLE Audio Car Stereo System PLD144 User Manual